The atom is sometimes said to be similar to a miniature planetary system, with electrons orbiting the nucleus. What does the uncertainty principle have to say about this view of the atom?

The proper name of the compound is now 1,1 - dihydroxy-3-phenyl propene.

Firstly we know that the parent chain is based on propane. Now we have three substituents on that parent chain. Two hydroxy moieties and one phenyl moiety.

The proper name of the compound is now 1,1 - dihydroxy-3-phenyl propene.

Learn more about names of molecules:https://brainly.com/question/26196615

#SPJ1

7.32 moles of Chromium is present in 4.41 × 10²⁴ atoms.

Number of moles = [tex]\frac{\text{Given number of atoms}}{\text{Avogadro's Number}}[/tex]

Avogadro's number is the number of particles in one mole of substance. 6.022 × 10²³ is known as Avogadro's Constant / Avogadro's Number.

Avogadro's Number = 6.022 × 10²³

Now put the values in above formula we get

Number of moles = [tex]\frac{\text{Given number of atoms}}{\text{Avogadro's Number}}[/tex]

                             = [tex]\frac{4.41 \times 10^{24}}{6.022 \times 10^{23}}[/tex]

                             = 7.32 moles

Thus from the above conclusion we can say that 7.32 moles of Chromium is present in 4.41 × 10²⁴ atoms.

Learn more about the Avogadro's Number here: https://brainly.com/question/1581342

#SPJ1

Answer: PINK

Explanation:

The concentration of the solution is 60 degrees Brix.

Degrees Brix is the sugar content of an aqueous solution. One degree Brix is 1 gram of sucrose in 100 grams of solution and represents the strength of the solution a as percentage by mass.

Mass percent refers to the percentage of solute present in the solution.

The concentration of the substance can be expressed in mass percent.

we have to first calculate mass percent.

So, we can write,

Mass percent = mass of solute / mass of solution x 100.

Mass of solution = mass of solute + solvent.

Here, sucrose is the solute and the water is the solvent.

The mass of the solute is 1.5Kg and the mass of the solvent is 1Kg.

Mass of solution = 1.5 + 1 = 2.5 Kg.

Mass percent = 1.5/2.5x100

Mass percent is 60%.

Here, 1% = 1 degree brix.

So here, 60% = 60 degree brix.

Hence, the concentration of the solution is 60 degree brix.

For a detailed study about mass percent refer given link https://brainly.com/question/13896694.

#SPJ1.

Answer:

6.0 x 10³ - 2.3 x 10³ = 3700

3700 ---------> 3.7 x 10³

1.2 x 10² L of oxygen is formed if 77.37 L of water is produced.

The density of water at STP = 0.99 g/ ml but we will assume 1 g/ml

Determine the mass of water ([tex]H_{2}[/tex]o) = 77.37 L × [tex]\frac{1000 ml}{1l}[/tex] × [tex]\frac{1g}{ml}[/tex]

The mass of water = 77370 g

Convert mass into moles = 77370 [tex]H_{2}[/tex]o × [tex]\frac{1mol}{18.01528} H _{2}O[/tex]

= 4294.6876 mol of [tex]H_{2} O[/tex]

Use stoichiometry to find how many mols of oxygen [tex]o_{2}[/tex] were used:

= 4294.6876 mol of [tex]H_{2} O[/tex] × [tex]\frac{13 mol }{10 mol}[/tex]

= 5583.0939 mol [tex]o_{2}[/tex]

Convert mols to mass = 5583.0939 mol ×[tex]\frac{32 g}{mol }[/tex]

= 178659.0059 g [tex]o_{2}[/tex]

Convert mass into liters

The density of [tex]o_{2}[/tex] at STP = [tex]\frac{1.439}{ml}[/tex]

Density of [tex]o_{2}[/tex] = 1.2 × [tex]10^{2}[/tex]

Hence,1.2 x 10² L of oxygen is formed if 77.37 L of water is produced.

To know more about Density refer to:   https://brainly.com/question/16060223

#SPJ1

1.2 x 10² L of oxygen is formed  if 77.37 L of water are produced at STP. The term is derived from the Greek word "oxy genes," which means "forms acid." a periodic table column that is vertical.

What is oxygen ?

The chemical element oxygen has an atomic number of 8. At normal temperatures and pressures, oxygen transforms into the chemical compound (O2) of two atoms, which is a colorless gas.

The density of H₂O at STP = 0.99 g ÷ ml, but we will assume 1 g/ml

The mass of  H₂O = 77370 g

Use stoichiometry to find  moles of oxygen given by

= 4294.6876 mol of X

= 5583.0939 mol

Convert moles into mass = 5583.0939 mol X

= 178659.0059 g

Then convert it into liter. 1.2 x 10² L of oxygen is formed  if 77.37 L of water.

Thus, 1.2 x 10² L of oxygen is formed  if 77.37 L of water are produced at STP.

To learn more about oxygen, follow the link;

https://brainly.com/question/1506082

#SPJ2

Answer:

0.396 J/g°C (to 3 sf)

Explanation:

50.0 = 10.6(24.9-13.0)(c)

c = 0.396 J/g°C (to 3 sf)

Taking into account the definition of dilution, the concentration of the new solution is 1 mol/L.

When it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.

Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

In this case, you know:

Replacing in the definition of dilution:

6 mol/L× 200 mL= Cf× 1200 mL

Solving:

(6 mol/L× 200 mL)÷ 1200 mL= Cf

1 mol/L= Cf

In summary, the concentration of the new solution is 1 mol/L.

Learn more about dilution:

brainly.com/question/6692004

brainly.com/question/16343005

brainly.com/question/24709069

#SPJ1

The molecule is water. Molecular formula of water is H₂O. Molecular weight of water is 18 g. The percentage composition of hydrogen and oxygen in water is 11.11 % and 88.89 %. Intermolecular force in water is dipole-induced dipole and London dispersion.

Name of the molecule is Water. Molecular formula of the compound is H₂O.

Molecular mass of H₂O = 2 × Atomic weight of H + Atomic weight of O

                                       = 2 × 1 + 16

                                       = 2 + 16

                                       = 18

The water molecule is Covalent because hydrogen atoms share electrons with the oxygen atom.

Percentage composition = [tex]\frac{\text{Mass of element}}{\text{Molar Mass}}[/tex]

Now,

Molar mass of Water = 18

Percentage composition of hydrogen = [tex]\frac{2}{18} \times 100[/tex]

                                                               = 11.11 %

Percentage composition of Oxygen = [tex]\frac{16}{18} \times 100[/tex]

                                                            = 88.89 %

In water molecule dipole-induced dipole and London dispersion forces are present because water has H-bonds.

The given molecule is water. Water is important for human body to keep a normal temperature. It carries nutrients. It protects our body organs and tissues. The function of water is to serves a s a lubricant. It helps to prevent constipation. It makes up Saliva.

Thus from the above conclusion we can say that The molecule is water. Molecular formula of water is H₂O. Molecular weight of water is 18 g. The percentage composition of hydrogen and oxygen in water is 11.11 % and 88.89 %. Intermolecular force in water is dipole-induced dipole and London dispersion.

Learn more about the Water Molecule here: https://brainly.com/question/1313076

#SPJ1

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Questions: Choose one molecule that is vital to the human body. Provide the following information: Name of the molecule

Now, provide the following information: Molecular formula

Now, provide the following information about your chosen molecule: Molecular mass

Now, provide the following information about your chosen molecule: The type of molecule (covalent or ionic)

Now, provide the following information about your chosen molecule: Percent composition of each element

Now, provide the following information about your chosen molecule: Intermolecular forces within the molecular

Now, provide the following information about your chosen molecule: Describe why the molecule is important and its function within the human body.

Answer:

Explanation:

green

Taking into account the reaction stoichiometry, 2.713 grams of aspirin are formed when 2.08 grams of salicyclic acid reacts.

In first place, the balanced reaction is:

C₄H₆O₃ + C₇H₆O₃ (Salicyclic Acid) →C₉H₈O₄ (aspirin) + C₂H₄O₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 138 grams of salicyclic acid form 180 grams of aspirin, 2.08 grams of salicyclic acid form how much mass of aspirin?

[tex]mass of aspirin=\frac{2.08 grams of salicyclic acidx 180 grams of aspirin}{138 grams of salicyclic acid}[/tex]

mass of aspirin= 2.713 grams

Then, 2.713 grams of aspirin are formed when 2.08 grams of salicyclic acid reacts.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

The freezing point depression of a solution that contains 2 moles of NaCl in 200 g of water (Kf = 1.86 °C/m) is 18.6 °C.

It is a decrease in the freezing point of a solution, in comparison with the pure solvent.

The solution contains 2 moles of NaCl in 200 g of water.

b = moles NaCl / Kg water = 2 mol/0.200 kg = 10 m

Given the cryoscopic constant (Kf) is 1.86 °C/m for water, the freezing point depression (ΔT) is:

ΔT = Kf × b = 1.86 °C/m × 10 m = 18.6 °C

The freezing point depression of a solution that contains 2 moles of NaCl in 200 g of water (Kf = 1.86 °C/m) is 18.6 °C.

Learn more about freezing point depression here: https://brainly.com/question/14115775

#SPJ1

Answer:

Oxidation - K

Reduction - Cu

Explanation:

2K --> 2K^+

Cu^+2 --> Cu

Filling out the table of elements below following the outlined order:

An element can be defined as a substance that can not be broken down into simpler substances.

An element serves as a building blocks for compounds and mixtures.

In conclusion, each element and its property as requested in the table are given above.

Learn more about element : brainly.com/question/18096867

#SPJ1

Answer:

CH3CH2OH

Explanation:

CH3CH2OH the ethanol is regarded as neutral since pH is very close to 7 and CH3CHO or acetaldehyde is an extremely weak basic max pH of 8.

Answer:

At Anode: oxidation occurs i.e loss of electrons

At cathode: reduction occurs i.e gain of electrons

OPTION 1 is the correct answer

A change in the entropy of a system indicate that the disorder of the system has changed. Option A

A change in entropy indicates is a measure of the disorder, or randomness, in a system.

An increased value of entropy means more disorder, and a decreased value of entropy means less disorder.

These changes in entropy occur spontaneously

Thus, a change in the entropy of a system indicate that the disorder of the system has changed. Option A

Learn more about entropy here:

https://brainly.com/question/15022152

#SPJ1

The correct order is 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f. The correct option is B.

The correct order of energy sublevel is 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.

Thus, with the exclusion of 5s, 5p, 6s, 5d, 6p, 7s, 5f, 6d, and 7p, what we have left in order of increasing energy is 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f.

More on energy sublevels can be found here: energy sublevels

#SPJ1

The correct order from least to greatest energy for the energy sublevels is;  1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f (Option B).

The Aufbau principle offers a method in which the energy levels in an atoms are arranged from the least to the greatest. We know that electrons are filled into orbitals in order of increasing energy.

Thus, the correct order from least to greatest energy for the energy sublevels is;  1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 4d, 4f (Option B).

Learn more about the  Aufbau principle:https://brainly.com/question/13393709

#SPJ1

Answer:

D.) Zn + H₂SO₄ ----> ZnSO₄ + H₂

Explanation:

Single-Replacement Reaction: a reaction in which an element in a compound is swapped with another element

    ex.) Zn + H₂SO₄ ----> ZnSO₄ + H₂

Double-Replacement Reaction: a reaction in which a cation in one compound is swapped with a cation in another

    ex.) Ba(OH)₂ + H₂SO₄ ----> BaSO₄ + 2 H₂O

Synthesis Reaction: a reaction in which two or more elements/compounds combine to form a new molecule

    ex.) 2 Mg + O₂ ----> 2 MgO

    ex.) H₂O + CO₂ ----> H₂CO₃

Answer:

Explanation:

yogurt is a colloid because of the milk/dairy in it. yogurt is a complex colloid.

As yogurt includes living bacterial cultures, proteins, lipids, and milk solids in addition to water, yoghurt is a colloid.

Yoghurt is a colloid because it contains living bacterial cultures, proteins, lipids, and milk solids in addition to water. A colloid forms a homogenous mixture rather than settling or separating over time because the particles or components are uniformly distributed throughout the medium. A water-in-oil emulsion, specifically yoghurt is regarded as an emulsion colloid. This implies that water droplets are evenly distributed across an ongoing fat or oil matrix. The matrix of yoghurt is made up of milk solids, proteins, and lipids, and the water phase is present as droplets. Lactic acid is produced when bacteria in the bacterial culture, including Lactobacillus bulgaricus and Streptococcus thermophilus, ferment milk's lactose.

To know more about colloid, here:

https://brainly.com/question/14507793

#SPJ6

The percent yield of the reaction that produced 0.350 mol HCI is 83.17%

Actual yield = 0.35 × 36.5

Actual yield = 12.775 g

Percentage yield = (Actual / Theoretical) × 100

Percentage yield = (12.775 / 15.36) ×100

Percentage yield = 83.17%

Learn more about stoichiometry:

https://brainly.com/question/14735801

#SPJ1

Molecular simulation is the part of the drug discovery life cycle that most likely uses quantum computing.

Drug discovery refers to the process to identify and validate medications in pharmaceutical research.

Drug discovery exploits computational approaches based on quantum modeling to accelerate this process.

In conclusion, molecular simulation is the part of drug discovery associated with quantum computing.

Learn more about drug discovery here:

https://brainly.com/question/14330435

#SPJ1

Answer:

2.16 g H₂O

Explanation:

Since we are not given the limiting reagent, we need to convert both reactants into the product. The actual amount of product will be the smaller mass produced.

To find the answer, we need to (1) convert grams reactant to moles reactant (via molar mass), then (2) convert moles reactant to moles H₂O (via mole-to-mole ratio from balanced equation coefficients), and then (3) convert moles H₂O to grams H₂O (via molar mass). It is important to arrange the ratios in a way that allows for the cancellation of units.

The balanced equation:

1 H₂SO₄(aq) + 2 NaOH(s) -----> 1 Na₂SO₄(aq) + 2 H₂O(l)

Molar Mass (H₂SO₄): 2(1.008 g/mol) + 32.065 g/mol + 4(15.998 g/mol)

Molar Mass (H₂SO₄): 98.073 g/mol

Molar Mass (NaOH): 22.990 g/mol + 15.998 g/mol + 1.008 g/mol

Molar Mass (NaOH): 39.996 g/mol

Molar Mass (H₂O): 2(1.008 g/mol) + 15.998 g/mol

Molar Mass (H₂O): 18.014 g/mol

5.88 g H₂SO₄           1 mole              2 moles H₂O            18.014 g
----------------------  x  -----------------  x  ------------------------  x  -----------------  =  
                                98.073 g            1 mole H₂SO₄           1 mole

=  2.16 g H₂O

6.3 g NaOH            1 mole              2 moles H₂O              18.014 g
--------------------  x  -----------------  x  --------------------------  x  ----------------  =
                              39.996 g           2 moles NaOH            1 mole

=  2.84 g H₂O

Since H₂SO₄ produces the smallest amount of product, it is the limiting reagent. In this case, H₂SO₄ is completely used up before NaOH has the chance to react totally. Therefore, the actual amount of H₂O produced is 2.16 g.

The percentage yield of the oxygen gas is 60%.

The reaction equation is;

2H^+ + H2O2 + 2MnO4 -> 2MnO2 + 4H2O + 3O2

Number of moles of hydrogen peroxide = 30/1000 * 0.30 M = 9 * 10^-3 moles

Number of moles of  potassium permanganate = 30/1000 * 0.30 M = 9 * 10^-3 moles

Now;

1 mole of H2O2 reacts with 2 moles of permanganate

 9 * 10^-3 moles of H2O2 reacts with  9 * 10^-3 moles * 2 moles/1 mole  

= 1.8 * 10^-2 moles

Hence, permanganate is the limiting reactant

b) The theoretical yield of oxygen is;

2 moles of oxygen produced 3 moles of O2

9 * 10^-3 moles oxygen  produced 9 * 10^-3 moles *  3 moles/2 moles

= 0.0135 moles

If 1 mole of O2 occupies 22.4 L

0.0135 moles of O2 occupies 0.0135 moles * 22.4 L/ 1 mole

= 0.302 L or 302 mL

c) Percentage yield of oxygen = 178 mL/ 302 mL * 100/1

= 60%

Learn more about percentage yield:https://brainly.com/question/27492865

#SPJ1

Answer:

If a rock displaces 1.65L of water, its volume must be 1.65L.
If you want to convert that to cm^3 it's 1000 cm^3 per liter...so 1650 cm^3

Explanation:

Answer:

you will taste the flavour of the food

Answer:

Option (2)

Explanation:

The two compounds formed will be AgCl and NaNO₃.

We can see that this will result in a balanced equation, so the answer is Option (2).

Answer:

B) NaNO3 + AgCl (s)

Explanation:

edge 2023

The pH of the solution is obtained to be 9.67.

A buffer is a solution that serves to militate against changes in acidity or alkalinity. The buffer is often made of a solution of a strong acid and its salt or a weak base and its salt.

Now we have the that;

Number of moles of base = 250 /1000 *  0.80 = 0.2 moles

Number of moles of salt = 150/1000 *  0.50 = 0.075 moles

Total volume of the solution = 250 + 150 = 400 mL or 0.4 L

Molarity of the base = 0.2 moles/0.4 L = 0.5 M

Molarity of the salt =  0.075 moles/ 0.4 L = 0.1875 M

pKb = - log( 1.8 x 10^-5) = 4.74

pOH = pKb + log [salt/base]

pOH =  4.74 + log (0.1875/ 0.5)

pOH = 4.33

pH = 14 - 4.33

pH = 9.67

The pH of the solution is obtained to be 9.67.

Learn more about pH:https://brainly.com/question/15289741

#SPJ1