The speed of the car at b if the normal force between the road and the tires at b is twice that at a is about 44.1 km/h.
What is Speed?Speed of the car at A = 50 km/h
Radius of curvature at A = 70 m
Radius of curvature at B = 70 m
Normal force between the road and the tires at B = 2 × Normal force between the road and the tires at A= 2N
Mass center of the car = 1.2 m
The speed of car at B be v km/h
From the conservation of energy at the point A and B, we get:
1/2 mv² + mgh = 1/2 m(50)² + mg(70 - r)
1/2 mv² + mg(70 + r) = 1/2 m(50²)
1/2 mv² = 1/2 m50² - mg(70 + r) …… equation (1)
From the conservation of energy at point B, we get:
1/2 mv² + mg(2r + 1.2) = 1/2 m(50)² + mg(70 - r)
2× Normal force between the road and the tires at A = Normal force between the road and the tires at B
Normal force between the road and the tires at B = 2 × Normal force between the road and the tires at A
Therefore, mg - 2 × N = mv²/rmg - N = mv²/2r
2mg - 4N = mv²/rmg - 2N = mv²/2r
Subtracting, we get:
N = mg/3
Normal force between the road and the tires at A = mg/3
Normal force between the road and the tires at B = 2mg/3
Normal force between the road and the tires at B = 2(mg/3) = mg/3
From the above equations, we get the value of v. Putting the values, we get:
1/2 mv² = 1/2 m(50)² - mg(70 + r) - mg(2r + 1.2) + mg(70 - r)1/2 v² = 1/2(50)² - g(70 + r) - g(2r + 1.2) + g(70 - r)v = 44.1 km/h
Therefore, the speed of the car at B is 44.1 km/h.
Learn more about Speed here:
https://brainly.com/question/28224010
#SPJ11
Which term describes the energy an object has due to the motion of its
particles?
A. Magnetic energy
B. Chemical energy
C. Elastic energy
D. Thermal energy
Answer: The answer is D. Thermal Energy.
Explanation:
Thermal energy is a type of kinetic energy owing to the fact that it results from the movement of particles.
air parcels that are colder than the surrounding air do what?
Air parcels that are colder than the surrounding air tend to be denser and heavier, which causes them to sink. This is due to the fact that cold air has a higher density than warm air.
As the cold air parcel sinks, it displaces the warmer air around it, causing the warmer air to rise. This process is known as convection, and it is responsible for many weather phenomena, such as thunderstorms and cumulus clouds. As the cold air parcel sinks, it also warms up due to compression. This is because the pressure of the surrounding air increases as the cold air parcel sinks and becomes more compressed. However, even as the parcel warms up, it remains colder than the surrounding air and will continue to sink until it reaches an altitude where it is no longer colder than the surrounding air. In the atmosphere, the movement of cold air parcels is one of the key drivers of weather patterns. Cold air tends to be associated with high pressure systems, which are characterized by sinking air and clear skies. These high pressure systems can bring calm, dry weather to an area. Conversely, warm air tends to be associated with low pressure systems, which are characterized by rising air and the potential for precipitation and storms.
learn more about air here
https://brainly.com/question/19368011
#SPJ4
what are the plans for the near and far future in regard to travelling to mars?
Currently, there are several plans for both near and far future travel to Mars.
In the near future, NASA's Artemis program aims to land humans on the moon again by 2024, and this program will serve as a stepping stone to eventually send humans to Mars. NASA's plans for Mars include sending robotic missions to the planet to study its geology, search for signs of past life, and prepare for future human exploration. NASA's Mars Sample Return mission, planned for the mid-2020s, aims to bring samples of Martian rock and soil back to Earth for study.
Other organizations, such as SpaceX and Blue Origin, have their own plans for sending humans to Mars. SpaceX CEO Elon Musk has stated that he hopes to send humans to Mars as early as 2026 using his Starship spacecraft, which is currently in development.
In the far future, there are plans for permanent human settlements on Mars. The Mars One project, which has faced funding and technical challenges, had aimed to establish a permanent human settlement on Mars by 2032. The Mars Society, a non-profit organization dedicated to the exploration and settlement of Mars, has also proposed plans for a permanent human settlement on Mars.
Overall, while there are many plans and aspirations for human travel to Mars, it remains a challenging and risky endeavor, and much research and development is still needed before humans can safely and sustainably travel to and live on the Red Planet.
learn more about mars here
https://brainly.com/question/29186894
#SPJ4
Give specific examples that illustrate the following processes. a. Work is done on a system, thereby increasing kinetic energy with no change in potential energy. b. Potential energy is changed to kinetic energy with no work done on the system. c. Work is done on a system, increasing potential energy with no change in kinetic energy. d. Kinetic energy is reduced, but potential energy is unchanged. Work is done by the system.
a. Examples of work being done on a system to increase kinetic energy with no change in potential energy include a person pushing a box across the floor, a ball rolling down a hill, and a rocket blasting off a launchpad.
b. Examples of potential energy changing to kinetic energy with no work done on the system include a skydiver jumping out of a plane and a rollercoaster car descending down a hill.
c. Examples of work being done on a system to increase potential energy with no change in kinetic energy include lifting a box up onto a shelf and pulling a rubber band back and stretching it.
d. Examples of kinetic energy being reduced but potential energy remaining unchanged with work done by the system include a ball rolling up a hill and a rocket thrusting up into the sky.
For more such questions on kinetic energy
https://brainly.com/question/4469628
#SPJ11
A bin is given a push across a horizontal surface. The bin has a mass m, the push gives it an initial speed of 2.50 m/s, and the coefficient of kinetic friction between the bin and the surface is 0.150.
Requirements:
(a) Use energy considerations to find the distance (in m) the bin moves before it stops.
(b) What If? Determine the stopping distance (in m) for the bin if its initial speed is doubled to 5.00 m/s.
(a) Using energy considerations the distance the bin moves before it stops is 0.877 m. (b) The stopping distance for the bin if its initial speed is doubled to 5.00 m/s is 1.755 m.
(a) Using the principle of conservation of energy, we can find the distance the bin moves before it stops, as shown below:
(1/2)mv²=μmgx,
where m = mass of the bin = m, v = initial speed = 2.5 m/s, μ = coefficient of kinetic friction = 0.15, g = acceleration due to gravity = 9.81 m/s², and x = distance the bin moves before it stops.
Substituting the given values in the above equation, we get:
(1/2)m(2.5)² = 0.15mgx
Simplifying the above equation, we get:
x = (1/2)(2.5)²/(0.15 × 9.81) = 0.877 m
Therefore, the distance the bin moves before it stops is 0.877 m.
(b) When the initial speed of the bin is doubled to 5.00 m/s, we can find the stopping distance using the same principle of conservation of energy, as shown below:
(1/2)mv²=μmgx,
where m = mass of the bin = m, v = initial speed = 5 m/s, μ = coefficient of kinetic friction = 0.15, g = acceleration due to gravity = 9.81 m/s², and x = stopping distance.
Substituting the given values in the above equation, we get:
(1/2)m(5)² = 0.15mgx
Simplifying the above equation, we get:
x = (1/2)(5)²/(0.15 × 9.81) = 1.755 m
Therefore, the stopping distance for the bin when its initial speed is doubled to 5.00 m/s is 1.755 m.
Learn more about Conservation of energy:
https://brainly.com/question/27422874
#SPJ11
A car comes to a bridge during a storm and finds the bridge washed out. The driver must get to the other side, so he decides to try leaping it with his car. The side the car is on is 19.5 m above the river, while the opposite side is a mere 1.6 m above the river. The river itself is a raging torrent 58.0 m wide.
1) How fast should the car be traveling just as it leaves the cliff in order to clear the river and land safely on the opposite side?
2) What is the speed of the car just before it lands safely on the other side?
1) The car must be traveling at a speed of 35.22 m/s just as it leaves the cliff in order to clear the river and land safely on the opposite side.
2) The speed of the car just before it lands safely on the other side will be zero, since its speed will have been slowed down by the air resistance.
To solve this problem, we will use the equation for horizontal distance:
d = v₀t
Where,
d is the horizontal distance (58m)
vo is the initial velocity (unknown)
t is the time taken (unknown)
We can use the equation for vertical displacement:
y = y₀ + v₀t - 1/2 gt²
Where,
y is the vertical displacement (18.9m)
yo is the initial vertical displacement (19.5m)
vo is the initial velocity (unknown)
g is the acceleration due to gravity (9.8m/s²)
t is the time taken (unknown)
We will also use the equation for final velocity:
vf = v₀ - gt
Where,
vf is the final velocity (0m/s)
v₀ is the initial velocity (unknown)
g is the acceleration due to gravity (9.8 m/s²)
t is the time taken (unknown)
We can now solve the equations simultaneously to find the initial velocity required (v₀):
d = v₀t
y = y₀ + v₀t - 1/2g t²
vf = v₀ - g t
Solving these equations, we find that the initial velocity (vo) required is 35.22 m/s.
Therefore, the car must be traveling at a speed of 35.22 m/s just as it leaves the cliff in order to clear the river and land safely on the opposite side.
To learn more about speed follow
https://brainly.com/question/30829321
#SPJ11
A 0.0450-kg golf ball initially at rest isgiven a speed of 25.0 m/s when a club strikes. If the cluband ball are in contact for 2.00 ms, what average force acts on theball? Is the effect of the ball's weight during the time ofcontact significant? Why or why not?
The average force that acts on the ball of 0.0450-kg which is initially at rest and then is given a speed of 25.0 m/s when a club strikes, is 562.5 N.
Mass of golf ball, m = 0.0450 kg
Initial velocity, u = 0 m/s
Final velocity, v = 25.0 m/s
Time of contact, t = 2.00 ms = 2 × 10⁻³s
Acceleration of the ball, 'a' can be calculated using the kinematic equation:
v = u + at
a = (v-u)/t
a = (25.0 - 0)/(2 × 10⁻³) m/s²
a = 12500 m/s²
The average force acting on the ball, F can be calculated using the equation,
F = ma= (0.0450) × (12500) N= 562.5 N
Thus, the average force acting on the ball is 562.5 N.
The effect of the ball's weight during the time of contact is not significant because it is only acting vertically downwards and does not affect the horizontal motion of the ball which is the motion required to calculate the average force acting on the ball. Therefore, only the horizontal component of the forces acting on the ball needs to be considered to calculate the average force.
In conclusion, the average force is 562.5 N and the effect of the ball's weight is not significant.
To know more about average force, refer here:
https://brainly.com/question/29781083#
#SPJ11
A flat coil of wire consisting of 22 turns, each with an area of 50 cm2, is positioned perpendicularly to a uniform magnetic field that increases its magnitude at a constant rate from 2 T to 7 T in 2.0 s.
What is the magnitude of the emf (in Volts) induced in the coil?
Your answer should be a number with two decimal places, do not include the unit.
Given, Number of turns, n = 22Area of each turn, A = 50 cm²
Magnetic field, B = 2 T (initial)Magnetic field, B' = 7 T (final)Time, t = 2.0 s
We need to find the emf induced in the coil. Induced emf, ε = -n (dΦ/dt)We know thatΦ = B A cos θwhere θ is the angle between magnetic field and area vector A.dΦ/dt = A dB/dt cos θNow, when the magnetic field is perpendicular to the plane of the coil, θ = 90°.Hence, cos 90° = 0
Therefore, dΦ/dt = 0Now,[tex]ε = -n (dΦ/dt) = -n×0 =ε = -n (dΦ/dt) = -n×0 = [/tex]xHence, the induced emf in the coil is 0 V.
for such more questions on Magnetic field
https://brainly.com/question/26257705
#SPJ11
For which of the following properties does the Moon have the largest value compared to the other planetary satellites (not moons of dwarf planets) in the Solar System?
The moon is a natural satellite that orbits Earth. It is the fifth-largest satellite in the solar system and the largest among planetary satellites.
What are the properties of the moon?The following properties are the ones where the Moon has the largest value compared to other planetary satellites:
Size: The moon is the fifth-largest satellite in the solar system, with a diameter of 3474 km. No other planetary satellite is as large as the moon. The closest satellite in terms of size is Ganymede, which is the largest moon of Jupiter and the ninth-largest object in the solar system, with a diameter of 5268 km.
Mass: The moon has a mass of 7.342 × 1022 kg, which is about 1.2% of Earth's mass. No other planetary satellite has a mass comparable to the moon, although a few come close. Ganymede has a mass of 1.5 × 1023 kg, which is about twice the mass of the moon, but it is a moon of Jupiter, not a planet.
Synchronous rotation: The moon is the only planetary satellite that is in synchronous rotation with its planet. This means that it takes the same amount of time for the moon to complete one orbit around Earth as it does to complete one rotation around its axis. As a result, the same side of the moon always faces Earth. No other planetary satellite has this property.
To know more about planetary satellites:
https://brainly.com/question/9545310
#SPJ11
Taking the following list on an item-by-item basis (i.e., without considering the other listed factors), a maintenance expenditure should be capitalized if the expenditure:
increases the salvage value of the asset.
extends the useful life of the asset.
A maintenance expenditure should be capitalized if it increases the salvage value of the asset or extends the useful life of the asset.
An expenditure is a payment made in return for a product or service. Capital expenditure is money spent by a company on long-term assets like equipment and buildings.
Capitalizing refers to recording a cost or expense on the balance sheet for a future period rather than recognizing it immediately in the current period.
Capitalizing expenditure means the company will recognize the expenditure as an asset, which will be amortized over its useful life as opposed to expenses in the current period.
Therefore, a maintenance expenditure should be capitalized if the expenditure increases the extends the useful life of the asset.
Learn more about expenditure here:
https://brainly.com/question/935872
#SPJ11
Applied force in garlic and effect of action applied
When a force is applied to an object, it can cause a change in the object's motion or state of rest.
If the force is unbalanced, it can cause the object to accelerate or decelerate, resulting in a change in speed or direction. The effect of the applied force depends on the mass and nature of the object, as well as the magnitude and direction of the force. Additionally, the object may experience other effects, such as deformation or compression, depending on the type and direction of the force applied. Understanding the effects of applied forces is crucial in fields such as engineering, physics, and mechanics.
To know more about engineering, here
brainly.com/question/19117846
#SPJ4
--The complete question is, When force is Applied on an object describe effect of action applied. --
how far, in centimeters, would you have to compress this spring to store this energy?
Use the equation for elastic potential energy to determine how far a spring must be squeezed to store a given quantity of energy. Adjust the equation to account for x, then, if required, convert to centimeters.
The elastic potential energy equation must be used to determine how far a spring would have to be compressed to store a certain quantity of energy. This equation links the spring constant and the distance a spring is compressed or extended to the energy contained in the spring. With the spring constant and the required quantity of energy to be stored in the spring, the equation may be changed to solve for the distance x. You may convert a distance measured in meters to centimeters by multiplying the result by 100. To prevent mistakes, it's crucial to utilise consistent units throughout the computation.
learn more about elastic potential here:
https://brainly.com/question/29311518
#SPJ4
What happens to the reaction rate when the concentration (absorbance) of the reactants is doubled? Determine the reaction order by solving the following equations. Show a sample computation in your lab notebook. rate; – [CV3]* = CV.x = x= _ rate4 _ [CV4]* Ox= ratez [CV]* rates _ [CVs]* rates CV.* rate, x=
The reaction rate will double when the concentration of the reactants is doubled. The reaction order can be determined by solving the equations provided.
For example, if the initial rate is given by:
Rate = [CV3]* = CV.x = x = rate4 [CV4]* Ox= ratez [CV]* rates [CVs]* rates CV.* rate,
Then the reaction order can be calculated by rearranging the equation to:
[CV3]* = CV.x/x = rate4 [CV4]* Ox/x = ratez [CV]* rates [CVs]* rates CV.* rate
Since [CV3]*, [CV4]*, [CV]* and [CVs]* are all constants, the equation simplifies to:
x/x = rate4 Ox/x = ratez rates rates rate
Hence, the reaction order is 4.
"reaction rate", https://brainly.com/question/31131380
#SPJ11
if a star has very weak hydrogen lines and is blue, what does that most likely mean?
Blue color and weak hydrogen lines indicate a hot and young star with low hydrogen content. It may have an outer layer rich in helium or heavier elements and has not fused enough hydrogen into helium.
When a star is blue and has extremely faint hydrogen lines, it is most likely a bright, young star with an outer layer rich in heavier elements such as helium rather than hydrogen. Given its blue hue, the star is hotter than most other stars, with a surface temperature of at least 10,000 Kelvin. Because the star hasn't been on the main sequence for very long, it may not have had enough time to fuse hydrogen into helium in its core, which is why the hydrogen content of the star is low, according to the weak hydrogen lines.
learn more about weak hydrogen lines here:
https://brainly.com/question/13046293
#SPJ4
the intensity of a spherical wave 4.5 m from the source is 124 w/m2. what is the intensity p in w/m2 at a point 9.6 m away from the source?
The intensity of the wave which is about 4.5 meter distance at a point 9.6 m away from the source is 306 W/m².
What is the intensity?The intensity of a spherical wave is inversely proportional to the square of the distance from the source.
Intensity (p) of the spherical wave with 4.5 meter distance can be calculated using the formula:
Intensity (p) = Intensity (I) × (Distance from source (d)² / Distance from source (D)²)
Where Intensity (I) = 124 W/m² and Distance from source (D) = 4.5 m.
Therefore, Intensity (p) = 124 W/m² × (9.6 m² / 4.5 m²)
Intensity (p) = 306 W/m².
Read more about the Intensity here:
https://brainly.com/question/28145811
#SPJ11
The force diagrams b and d depict an object moving to the right with a constant speed. None of the force diagrams depict an object moving to the left with a constant speed.
In the force diagram a, the force on the left and the right side is the same. Also, the force on the front and the back are the same. So the object is stationary since the net force becomes zero.
In the force diagram b, the force towards the right is greater than the force towards the left. So the object moves towards the right.
In the force diagram c, no force is applied towards the left or right. The force applied at the front and the back are the same. Hence, the object is at rest since the net force is zero.
In the force diagram d, the force is applied towards the right and no force is applied towards the left. So the object moves towards the right.
The force diagrams b and d depict an object moving to the right with a constant speed. None of the force diagrams depict an object moving to the left with a constant speed.
In the force diagram a, the force on the left and the right side is the same. Also, the force on the front and the back are the same. Therefore, the object is stationary since the net force is zero.
In the force diagram b, the force towards the right is greater than the force towards the left. Thus, the object moves towards the right.
In the force diagram c, no force is applied towards the left or right. The force applied at the front and the back are the same. Hence, the object is at rest since the net force is zero.
In the force diagram d, the force is applied towards the right and no force is applied towards the left. Therefore, the object moves towards the right.
Learn more about constant speed: brainly.com/question/17948692
#SPJ11
Consider the wave equation on the finite domain [0, 1] with both ends fixed and a linear restoring force. utt = uxx − u, x ∈ (0, 1), t > 0, u(x, 0) = f(x), x ∈ [0, 1], ut(x, 0) = g(x), x ∈ [0, 1], u(0, t) = 0, t ≥ 0 u(1, t) = 0 t ≥ 0. Solve this PDE using Fourier series. (Hint: You may find it convenient to write the PDE as utt + u = uxx when plugging in the derivatives of X(x) and T(t).)
To solve, this PDE using the Fourier series we have to follow the below process
We know that u(x,t) can be represented in the Fourier series as:
u(x, t) = Σn=1∞ {An sin( nπx) + Bn cos( nπx)}[tex] \times \left ( Cn cos(n\pi t)+Dn sin(n\pi t)\right )[/tex]
Where An, Bn, Cn, and Dn are constants that depend on the given function f(x) and g(x).
Next, we differentiate u(x, t) twice with respect to t and once with respect to x, and then we plug it into the given wave equation to get:
∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) = ∑n=1∞ An sin(nπx) (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)]
To find An, we multiply both sides of the above equation by sin(nπx) and integrate it with respect to x.
∫[0,1] sin(nπx)[∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx] = ∫[0,1] sin(nπx) [∑n=1∞ An sin(nπx) (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] dx]
Using the orthogonality property of sine and cosine,
we get An (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] = ∫[0,1] sin(nπx) [∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx]
We can find the constants Cn and Dn by using the initial conditions:u(x, 0) = f(x), x ∈ [0, 1], and ut(x, 0) = g(x), x ∈ [0, 1].
Applying Fourier series to initial conditions:
u(x, 0) = f(x) = ∑n=1∞ An sin(nπx) Cn cos(nπt) + Dn sin(nπt)ut(x, 0) = g(x) = ∑n=1∞ An sin(nπx) nπ [Cn cos(nπt) + Dn sin(nπt)]
Therefore, we have to solve the four equations given by:
An (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] = ∫[0,1] sin(nπx) [∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx]f(x)
= ∑n=1∞ An sin(nπx) Cn cos(nπt) + Dn sin(nπt)g(x) = ∑n=1∞ An sin(nπx) nπ [Cn cos(nπt) + Dn sin(nπt)]u(0, t) = 0u(1, t) = 0
To know more about PDE: https://brainly.com/question/31129985
#SPJ11
a .200kg particle has a speed on 2.20m/s at point a and kintetic energy of 7.00 j at point b. what is the net work done on the particle by external forces as it moves from a to b
The net work done on the particle by external forces as it moves from a to b is -6.11 J.
It is given that Mass of particle, m = 0.200 kg, Speed of the particle at point A, vA = 2.20 m/s, Kinetic energy of the particle at point B, kEB = 7.00 J. The work done by the external forces on the particle can be calculated using the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy.
W = kEB - kEA
where, W = work done by external forces on the particle, kEA = initial kinetic energy of the particle, kEB = final kinetic energy of the particle. The initial kinetic energy of the particle at point A can be calculated as:
kEA = 1/2mvA²= 1/2 × 0.200 × (2.20)²= 0.484 J
Now, the work done by external forces on the particle is
W = kEB - kEA = 7.00 - 0.484 = 6.516 J
Therefore, the net work done on the particle by external forces as it moves from A to B is -6.516 J, since the work is negative. Thus, the answer is -6.11 J (approx).
Learn more about Work done:
https://brainly.com/question/25573309
#SPJ11
When a nerve cell fires, charge is transferred across the cell membrane to change the cell's potential from negative to positive. For a typical nerve cell, 9.5 pC of charge flows in a time of 0.45 ms. What is the average current through the cell membrane? Express your answer to two significant figures and include the appropriate units.
When a nerve cell fires, charge is transferred across the cell membrane to change the cell's potential from negative to positive. The average current through the cell membrane is 21.1 mA.
For a typical nerve cell, 9.5 pC of charge flows in a time of 0.45 ms. Express your answer to two significant figures and include the appropriate units. Given that: Charge, q = 9.5 pC. Time, t = 0.45 ms. Formula Used: I = q/t. Where,
I = Currentq =
Charge through cell membranet = Time.
Average current through the cell membrane is calculated as:I = q/tSubstituting the given values, we get: I = 9.5 pC/0.45 msI = 21.1 mATherefore, the average current through the cell membrane is 21.1 mA.
Learn more about cell membrane: brainly.com/question/1768729
#SPJ11
A fancart of mass 0.8 kg initially has a velocity of < 0.9, 0, 0 > m/s. Then the fan is turned on, and the air exerts a constant force of < -0.2, 0, 0 > N on the cart for 1.5 seconds. 1. What is the change in momentum of the fancart over this 1.5 second interval?(kg*m/s) 2.What is the change in kinetic energy of the fancart over this 1.5 second interval? (J) Thank you it is due tonight!
Answer:
Change in momentum: [tex]\langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}}[/tex].
Change in kinetic energy: approximately [tex](-0.2)\; {\rm J}[/tex].
Explanation:
Change in momentum [tex]\Delta p[/tex] is equal to the net impulse [tex]J[/tex] on the object. In order to find the net impulse [tex]J\![/tex], multiply the net force on the object [tex]F_{\text{net}[/tex] by the duration [tex]\Delta t[/tex]:
[tex]\begin{aligned} J &= F_{\text{net}}\, \Delta t \\ &= (1.5)\, \langle -0.2,\, 0,\, 0\rangle\; {\rm N\cdot s} \\ &= \langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}} \end{aligned}[/tex].
Since the change in momentum is equal to net impulse:
[tex]\Delta p = J = \langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}}[/tex].
Divide the change in momentum by mass [tex]m[/tex] to find the change in velocity [tex]\Delta v[/tex]:
[tex]\begin{aligned}\Delta v &= \frac{\Delta p}{m} \\ &= \frac{\langle -0.3,\, 0,\, 0\rangle}{0.8}\; {\rm m\cdot s^{-1}} \\ &\approx \langle -0.375,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
Thus, velocity has changed from [tex]u = \langle 0.9,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}[/tex] to:
[tex]\begin{aligned} v &= u + \Delta v \\ &= \langle 0.9,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}} \\ &\quad + \langle -0.375,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}} \\ &= \langle 0.525,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
The initial kinetic energy (a scalar) was:
[tex]\begin{aligned}(\text{KE, initial}) &= \frac{1}{2}\, m\, {(\| u\|_{2})}^{2} \\ &\approx \frac{1}{2}\, (0.9^{2})\; {\rm J} \\ &=0.324\; {\rm J}\end{aligned}[/tex].
The new kinetic energy would be:
[tex]\begin{aligned}(\text{KE}) &= \frac{1}{2}\, m\, {(\| u\|_{2})}^{2} \\ &\approx \frac{1}{2}\, (0.525^{2})\; {\rm J} \\ &= 0.11025\; {\rm J}\end{aligned}[/tex].
Hence, the change in kinetic energy would be:
[tex]\begin{aligned} &(\text{KE}) - (\text{KE, initial}) \\ \approx\; & 0.324\; {\rm J} - 0.11025\; {\rm J}\\ \approx \; & (-0.2)\; {\rm J} \end{aligned}[/tex].
what is the magnitude of the minimum magnetic field that will keep the particle moving in the earth's gravitational field in the same horizontal, northward direction? express your answer in teslas.
The magnitude of the minimum magnetic field that will keep a particle moving in the same horizontal, northward direction in the earth's gravitational field is 0.05 tesla. The direction of the magnetic field must be at right angles to the velocity of the particle.
What is the magnitude of minimum magnetic field?
The magnetic field required to keep a particle moving in the earth's gravitational field in the same horizontal, northward direction is called the minimum magnetic field. It is given that this magnetic field is minimum, and we have to find its magnitude.
Suppose the mass of the particle is 'm', and its charge is 'q.' Then the gravitational force acting on it is 'mg,' where 'g' is the acceleration due to gravity. This force acts downward. The electric field acting on the particle is in the eastward direction, and its magnitude is 'E.'
This field is due to the earth's magnetic field. Now, let's consider the vertical and horizontal components of the gravitational force acting on the particle.
Since we need to keep the particle moving in the same horizontal northward direction, the horizontal component of the gravitational force should be balanced by the electric force. The horizontal component of the gravitational force is given as: mgh, where 'h' is the height of the particle above the ground level. The electric force acting on the particle is given as: Eq. The magnitude of the minimum magnetic field required is:
B = E/v = mgh/qv.
Therefore, the magnitude of the minimum magnetic field that will keep the particle moving in the earth's gravitational field in the same horizontal, northward direction is mgh/qv.
Read more about the magnetic field here:
https://brainly.com/question/14997726
#SPJ11
two in-phase loudspeakers, which emit sound in all directions, are sitting side by side. one of them is moved sideways by 6.0 m , then forward by 4.0 m . afterward, constructive interference is observed 14 , 12 , and 34 the distance between the speakers along the line that joins them, and at no other positions along this line.Part A What is the maximum possible wavelength of the sound waves ?
The maximum possible wavelength of the sound waves is 6 meters.
What are in-phase loudspeakers?In-phаse loudspeаkers аre а type of speаker system thаt emit sound wаves in phаse. In-phаse meаns thаt the sound wаves аre coming from the speаkers аt the sаme time аnd in the sаme direction. When two in-phаse loudspeаkers аre put together, they cаn produce constructive interference. In this cаse, when one loudspeаker is moved, constructive interference occurs аt specific points аlong the line thаt joins them.
The mаximum possible wаvelength of the sound wаves cаn be cаlculаted using the formulа:
λmаx = 2d
Where:
λmаx = mаximum possible wаvelengthd = distаnce between the loudspeаkersАlong the line thаt joins them, constructive interference is observed аt three points: 14 m, 12 m, аnd 34 m. Therefore, the distаnce between the speаkers should be equаl to one of the wаvelengths. To find the mаximum possible wаvelength, we need to find the lаrgest distаnce between the speаkers.
In this cаse, the distаnce between the speаkers is 6 m (sidewаys movement) + 4 m (forwаrd movement) = 10 m. Therefore, the mаximum possible wаvelength of the sound wаves is 2 × 10 m = 6 m.
For more information about In-phаse loudspeаkers refers to the link: https://brainly.com/question/30030701
#SPJ11
One end of a horizontal spring with force constant 76. 0 N/m is attached to a vertical post. A 5. 00-kg can of beans is attached to the other end. The spring is initially neither stretched nor compressed. A constant horizontal force of 51. 0 N is then applied to the can, in the direction away from the post.
What is the speed of the can when the spring is stretched 0. 400 m?
At the instant the spring is stretched 0. 400 m, what is the magnitude of the acceleration of the block?
The required speed of the the can when the spring is stretches is calculated to be 2.39 m/s.
The magnitude of acceleration of the block is calculated to be 4.12 m/s².
The force constant of the spring is given as k = 76 N/m.
Mass of the beans is given as 5 kg.
The constant horizontal force applied is given as 51 N.
The stretching in the spring is given as 0.4 m.
The expression to calculate speed of the block for the stretch in the spring is,
F x - 1/2 k x² = 1/2 m v²
v = √2 (F x - 1/2 k x²)/m
Putting all the values, we have,
v = √2 (51× 0.4 - 1/2× 76 × (0.4)²)/5 = √2 (20.4 - 6.08)/5 = 2.39 m/s.
Thus, the speed of the can for stretch in the spring is 2.39 m/s.
The relation to calculate the magnitude of acceleration of the block is,
a = (F - k x)/m = (51 - 76× 0.4)/5 = 4.12 m/s²
Thus, the magnitude of acceleration is calculated to be 4.12 m/s².
To know more about springs:
https://brainly.com/question/29437144
#SPJ4
What does Kepler's second law say about comets?
Kepler's second law states that the velocity of a planet is proportional to the distance from the sun squared. This is not specifically about comets but applies to all objects in the solar system, including comets.
Kepler's Second Law is also known as the Law of Equal Areas. This law states that a planet orbits the sun in such a way that the imaginary line connecting the planet and the sun will sweep out an equal area over an equal time period.
In other words, as the planet approaches the sun, it travels faster, and as it moves away from the sun, it slows down. The velocity of a planet is proportional to the distance from the sun squared. This law applies to all objects in the solar system, including comets.
Hence, Kepler's second law states that the velocity of a planet is proportional to the distance from the sun squared.
To know more about Kepler's Second Law, refer here:
https://brainly.com/question/28192903#
#SPJ11
how many electrons are there in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm )? express your answer using two significant figures.
There are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm.
To calculate the number of electrons in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm), you can use the following equation:
n = ρV / m
where:
n is the number of electrons.ρ is the density of copper (8.96 g/cm³).V is the volume of the wire. m is the mass of one copper atom.To find the volume of the wire, you need to use the equation for the volume of a cylinder:
V = πr²hWhere:
r is the radius of the wire (1.025 mm). h is the length of the wire (30.0 cm).Therefore, V = π(1.025 mm)²(30.0 cm) = 9.30 cm³The mass of one copper atom is 63.55 g/mol or 1.054 x 10⁻²² g. To find m, you need to use Avogadro's number (6.02 x 10^23 atoms/mol):m = (63.55 g/mol) / (6.02 x 10^23 atoms/mol) = 1.055 x 10⁻²² g
Now, you can plug in the values:
n = (8.96 g/cm³)(9.30 cm³) / (1.055 x 10⁻²² g) = 7.86 x 10²³ electrons
Therefore, there are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm. This should be rounded to 2 significant figures, so the final answer is 7.9 x 10²³ electrons.
Learn more about electrons: https://brainly.com/question/26084288
#SPJ11
a small 1.25 kg ball on the end of a light rod is rotated in a horizontal circle of radius 1.2 m. calculate: (a) the moment of inertia of the system baout the axis of rotation, and (b) the torque neededt ot keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 n on the ball
The torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
A small 1.25 kg ball on the end of a light rod is rotated in a horizontal circle of radius 1.2 m.
The moment of inertia of the system about the axis of rotation and the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball can be calculated as follows:
Part (a)The moment of inertia, I of a solid ball is given by I = 2/5mr².
Here, m is the mass of the ball, and r is the radius of the ball.
We have to find the moment of inertia of the system about the axis of rotation.
Since the axis of rotation passes through the center of the ball, the moment of inertia of the ball is given by Iball = 2/5mr².
Thus, the moment of inertia of the system about the axis of rotation is given by I = Iball + mR²I = 2/5mr² + mR²I = m(2/5r² + R²)I = 1.25(2/5(0.06)² + (1.2)²)I = 0.026 kg.m²
Part (b)The torque required to keep the ball rotating at constant angular velocity can be calculated as follows:
τ = Iα
Here, τ is the torque,
I is the moment of inertia of the system, and
α is the angular acceleration.
At constant angular velocity, α = 0.
Since air resistance exerts a force of 0.02 N on the ball, the torque required to keep the ball rotating at constant angular velocity is
τ = Frτ = F × Rτ = 0.02 × 1.2τ = 0.024 N.m
Therefore, the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
To know more about torque here
https://brainly.com/question/25708791
#SPJ11
The picture shows a bicyclist increasing speed while riding down a hill during a bicycle race.
Which statements accurately describe the potential and kinetic energy of this bicyclist?
The statement "Kinetic energy increases. Potential energy decreases" accurately describes the potential and kinetic energy of the bicyclist.
What is Kinetic Energy?
The kinetic energy of an object is directly proportional to its mass and the square of its velocity. This means that an object with a larger mass or higher velocity will have a greater kinetic energy than an object with a smaller mass or lower velocity.
As the bicyclist moves downhill, their speed increases, and therefore their kinetic energy increases. At the same time, the height of the bicyclist above the ground (and therefore their potential energy) decreases as they move downhill. This is because potential energy is energy that is stored in an object due to its position or configuration in a force field, and in this case, the force field is gravity. As the bicyclist moves downhill, they are losing potential energy and converting it to kinetic energy, which is the energy of motion.
Learn more about Kinetic Energy from the given link
https://brainly.com/question/25959744
#SPJ1
A spring attached to a mass is at rest in the initial position (not shown). The spring is compressed in position A and is then released, as shown in position B. Which equation describes the conservation of energy in position A?
[tex]E=\frac{1}{2} mv^{2} \\E=mgh\\E=\frac{1}{2} kx^{2} \\E=\frac{1}{2} k2kx^{2}[/tex]
Answer:
Explanation:
The energy conservation is equal to half of the product of the spring constant and the square of displacement of the spring, so option C is correct.
A 20 kg projectile is fired at an angle of 60 degrees above the horizontal with a speed of 80.0 m/s. At the highest point of its trajectory, the projectile explodes into two pieces with equal mass, one of which falls vertically with zero initial speed. You can ignore air resistance.a) How far from the point of firing does the other fragment strike if terrain is level?b) How much energy is released during the explosion?
Thus, the energy released in the explosion is given by:
E = (20 kg) * (9.8 m/s2) * (483.3 m) = 96,276 J.
A 20 kg projectile is fired at an angle of 60 degrees above the horizontal with a speed of 80.0 m/s. At the highest point of its trajectory, the projectile explodes into two pieces with equal mass, one of which falls vertically with zero initial speed.
The distance from the point of firing at which the other fragment strikes is equal to the horizontal range of the projectile before it explodes. This can be found using the equation for horizontal range of a projectile, which is R = (Vx)2 / g, where Vx is the initial horizontal velocity and g is the acceleration due to gravity. Plugging in the given values, we get:
R = (80.0 m/s)2 / (9.8 m/s2) = 645.1 m.
The energy released in the explosion can be calculated using the equation E = mgh, where m is the mass of the projectile, g is the acceleration due to gravity, and h is the height of the projectile at the highest point of its trajectory. Since the height of the projectile can be found using kinematics equations, we get:
h = (Vy)2 / (2g), where Vy is the initial vertical velocity. Plugging in the given values, we get:
h = (80.0 m/s * sin 60o)2 / (2 * 9.8 m/s2) = 483.3 m
for such more questions on kinematics equations
https://brainly.com/question/28788270
#SPJ11
Suppose a large data set includes information about the weights (measured in carats) and prices (measured in US dollars) of recent diamond sales. The data produce the linear model below, and the R-squared value for this model is 0.85Predicted Price = -2,256 + 7,756(weight)What can we conclude from the R-squared value of 0.85?
The R-squared value of 0.85 indicates that the model explains 85% of the variability in the data set. Therefore, the linear model is a good fit for this data set.
The R-squared value for a linear model is a measure of how well the model fits the data. It ranges between 0 and 1, with 1 indicating a perfect fit and 0 indicating no relationship between the independent variable and the dependent variable. A high R-squared value means that the model fits the data well.
The R-squared value of 0.85 indicates that the linear model is a good fit for the data. It implies that 85% of the variation in the diamond prices can be explained by the variation in the weight of the diamonds.
The remaining 15% could be due to factors other than the weight of the diamonds, such as cut, clarity, and color.
Therefore, it is essential to consider other factors when predicting diamond prices, rather than relying solely on the weight of the diamonds.
Learn more about linear model function here:
brainly.com/question/28033207
#SPJ11