The coefficient of friction between a car and dry pavement is approximately 0.7, but the coefficient on wet pavement is 0.4 or less. What does this indicate about driving on wet pavement? A) A car's normal force is less on wet pavement. B) A car's normal force is greater on wet pavement. C) A car requires less applied force to move on wet pavement. D) A car requires more applied force to move on wet pavement.

Answers

Answer 1

Answer:

D) A car requires more applied force to move on wet pavement

Explanation:

The coefficient of friction determines the frictional force that the ground applies on the car .

Maximum force of friction generated = μ R where μ is coefficient of friction and R is reaction force of the ground

Reaction force of the ground = mg or weight of the car . Since weight is same on dry and wet ground so normal force will be same is both the case .

Force of friction generated in respect of dry pavement will be more because of greater coefficient of friction .

Friction force helps in driving a car in forward direction hence it is easy to drive car on dry pavement . On wet pavement , it will slip off at the same place rather than move forward .


Related Questions

Use one letter for each letter. Please I need help

Answers

Answer:

A. Battery

B. Switch

C. Element

D. Wire

Explanation:

I'm not completely positive.

Answer:

A:Battery B:Resistor C:Element D:wire

Explanation:

During his recent skydiving adventure, Luke Skyfaller has reached a terminal speed of 9.8 m/s as he approach the ground with his parachute. During an attempt to snap one last photo with his camera Luke fumbled it from a height of 52.8 m above the ground determine the speed with which the camera hits the ground.

Answers

Answer:

The correct solution is "33.62 m/s".

Explanation:

The given values are:

Speed

u = 9.8 m/s

Height

s = 52.8 m

As we know,

⇒ [tex]v^2 = u^2 + 2as[/tex]

On putting the estimated values, we get

⇒      [tex]=(9.8)^2+2\times 9.8\times 52.8[/tex]

⇒      [tex]=96.04+1034.88[/tex]    

⇒      [tex]=\sqrt{1130.92}[/tex]

⇒      [tex]=33.62 \ m/s[/tex]

What is the representation of the momentum vector?
1. a number
2. a dot
3. a straight line
4. an arrow **

Answers

an arrow

Explanation:

momentum is a vector quantity it has both magnitude and direction.

a vector diagram can be used to represent this principle of momentum conservation such as diagram uses an arrow to represent the magnitude and direction of the momentum vector for the individual objects before the collision and combined after the collision

The best representation of momentum vector is ; ( 4 )  An arrow

A momentum is a vector quantity with both magnitude and direction and it  simply represents  a mass ( object ) in motion. momentum is calculated as ;

P = mV .  where m = mass of object , v = velocity of object .

An arrow is a good representation of momentum vector because it has both mass and velocity when fired from bow.

Hence we can conclude that the best representation of momentum vector is an arrow.

Learn more : https://brainly.com/question/20182620

i been answering all your qustions but noone can help me ? crazy but can someone pls help me its due today ill give alott of points if u help


01.07 Motion Discussion-Based Assessment
Review the topics listed from the lesson.
Arrange to complete the discussion-based assessment with your instructor.
Submit the date and time you spoke with your instructor for the 01.07 Motion Discussion-Based Assessment.

Answers

Answer:

Do you have a picture of your work?, Maybe i could help with it if you did.

Answer:

Hi, can you send the list of topics? I'd be happy to help you review. Also, did you meet with your instructor to complete the discussion-based assessment?

Explanation:

2. A car travels 100 km due East in 2 hours. It then travels 50 km South in 1 hour. What is its average velocity? ​

Answers

Answer: The average velocity of the car is 37.27 km/h.

Explanation:

Answer:

Solution

100 km into m/s= 55.4 m/s

59 km into m/s = 13.8m/s

Average velocity= v+u/2

=69.2/2

= 34.6

I think it's average velocity is 35.6

I think it will help

How will you determine the volume of a cuboid ? Write the formula you will use.​

Answers

Length x width x Height

please answer my question :)

Answers

Answer:

Galileo discovered that objects that are more dense, or have more mass, fall at a faster rate than less dense objects, due to this air resistance. A feather and brick dropped together. Air resistance causes the feather to fall more slowly.

this is a physics question please help

Answers

Answer:

mass×Velocity

Explanation:

b/c when we want to get KE =one over two mass times velocity square

The diagram shows two forces acting on an object. The forces have magnitudes F1 = 2.7 N and F2 = 0.80 N.
What third force will cause the object to be in equilibrium?
O2.8 Nat 163° counterclockwise from F1
O 1.8 N at 163° counterclockwise fromF1
O2.8 N at 123° counterclockwise from F1
O 3.0 N at 147° counterclockwise from F1

Answers

Answer:

2.8 [N] at 163° counterclockwise from F1

Explanation:

To solve this problem we must perform a summation of forces on the X & y axes, these summations of forces must be equal to zero.

ΣFx = 0

- F1 + Fx = 0

- 2.7 + Fx = 0

Fx = 2.7 [N]

ΣFy = 0

- Fy + 0.8 = 0

Fy = 0.8 [N]

Now using the Pythagorean theorem we can calculate the magnitude of the force.

F = √(2.7)² + (0.8)²

F = 2.81 [N]

Now we can determine the angle using the tangent of the angle.

tan (α) = F2/F1

α = tan^-1 (0.8/2.7)

α = 16.5°

The force is in the fourth quadrant, so we need to subtract 180° from the calculated angle.

180 - 16.5 = 163.5°

Therefore the force is going to the 2.8 [N] at 163° counterclockwise from F1

what state of matter is the sun

Answers

Answer:

the sun is plasma

Explanation:

it is a hot ball of gas made out of oxygen

Answer:

Plasma

Explanation:

All stars are made of gas, however the sun is so hot that most of that gas is plasma

do you now how hot suns core is

Answers

Answer:

Core: the temperature at the very center of the Sun is about 27 million degrees Farenheit (F). The temperature cools down through the radiative and convective layers that make up the Sun's core.

Explanation:

it is about 27 million degrees Fahrenheit

good luck :D

!Will give brainliest! A journal publication is used during which of the following steps of the scientific method?
information
observation
experiment
problem

Answers

observations and collect data

Make Predictions

Gather Data

Analyze the Data

Draw Conclusions

the scientific method include: 1) asking a question about something you observe, 2) doing background research to learn what is already known about the topic, 3) constructing a hypothesis, 4) experimenting to test the hypothesis, 5) analyzing the data from the experiment and drawing conclusions,

see attached, thanks !

Answers

Answer:

B = Frictional force

What are the factors that affect the electric force?

Answers

Answer:

Strength of the charge.

Explanation:

Distance from the charge.

Friction.

Conduction (Direct Contact)

Induction.

18.1 Assessment.

18.1 Assessment.

Net Charge.

how can I determine the pressure of a certain place. I mean formula of pressure​

Answers

Answer:

Pressure and force are related, and so you can calculate one if you know the other by using the physics equation, P = F/A. Because pressure is force divided by area, its meter-kilogram-second (MKS) units are newtons per square meter, or N/m2.

An ultra-low friction pulley deal is as shown. The two weights experience an acceleration of 3.8m/s2. The first weight has 1.08kg. Find the mass of the second weight

Answers

Answer:

The mass of the second weight is approximately 0.477 kg

Explanation:

The given parameters are;

The acceleration experienced by the two weights = 3.8 m/s²

The mass of the first weight = 1.08 kg

The formula for the acceleration, a, of weights attached to a friction pulley, is given as follows;

[tex]a = \dfrac{g \cdot (M - m)}{M + m}[/tex]

Where;

a = The common acceleration of the two weights

g = The acceleration due to gravity = 9.81 m/s²

M = The mass of the first weight = 1.08 kg

m = The mass of the second weight

Therefore, we have;

[tex]m = \dfrac{M\cdot (g -a )}{g + a} = \dfrac{1.08\times (9.81 -3.8 )}{9.81 + 3.8} \approx 0.477[/tex]

The mass of the second weight = m ≈ 0.477 kg

The mass of the second weight ≈ 0.477 kg.

1 The photoelectric effect is good evidence for __________.
A both wave and particle nature, because it blends photons with electrons
B the wave nature of EM radiation, because it shows how wave amplitude is proportional to quanta of energy referred to as photons
C the particle nature of EM radiation, because it shows how frequency is proportional to quanta of energy referred to as photons
D neither the wave nor the particle nature of light, because results vary based on the frequency of light used
2 How can you calculate the momentum of a photon?
A the product of 2, pi, and the photon's radius
B the product of mass and velocity
C a photon doesn't have momentum because it has no mass
D Planck's constant divided by the photon's wavelength
3 Interference and diffraction patterns are good evidence for __________.
A the particle nature of EM radiation
B neither the particle nature nor the wave nature of EM radiation
C both the particle nature and wave nature of EM radiation
D the wave nature of EM radiation
4 The ultraviolet catastrophe is good evidence for the:(1 point)
A particle nature of quanta
B wave nature of quanta
C neither the wave nor the particle nature of quanta
D both particle and wave nature of quanta

Answers

Answer:

1. the particle nature of EM radiation, because it shows how frequency is proportional to quanta of energy referred to as photons

2. Planck's constant divided by the photon's wavelength

3. the wave nature of EM radiation

4. particle nature of quanta

Read the chapter next time bozo

Explanation:

The photoelectric effect is good evidence for

The particle nature of EM radiation, because it shows how frequency is proportional to quanta of energy referred to as photons.Planck's constant divided by the photon's wavelength.The wave nature of EM radiation.Particle nature of quanta.

What are two nature of light?

Light has two different nature:

Wave nature Particle nature

What do you mean by particle nature of light?Particle nature of light states that light consists of particles called 'Photons'.Photons are  considered as bunch of energy , which represents Electromagnetic radiation.What is wave nature of light?

Wave nature of light states that light behaves as an electromagnetic wave.

What is photoelectric effect?

The phenomenon of emission of electrons from the surface of the metal when the light of suitable frequency falls on it.

What is Plank's constant?The physical constant that relates the energy carried by a single photon to its corresponding frequency.It is denoted by 'h'.Its value is 6.62607015 × 10-34 m2 kg / s.

Thus , we can say that, The photoelectric effect is good evidence for

The particle nature of EM radiation, because it shows how frequency is proportional to quanta of energy referred to as photons.Planck's constant divided by the photon's wavelength.The wave nature of EM radiation.Particle nature of quanta.

Learn more about Photoelectric effect here -

https://brainly.com/question/21320305

#SPJ2

What are the similarities of gravity and air resistance?

Answers

Answer: Gravity or Air Resistance. As you saw and read on the previous screens, the force of gravity causes an object to accelerate toward the ground. However, the force of air resistance counteracts gravity and affects how fast an object falls. In this activity, you will compare the forces of gravity and air resistance.

Explanation:

What is a metal?????????​

Answers

Answer:

A metal is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically malleable (they can be hammered into thin sheets) or ductile (can be drawn into wires). A metal may be a chemical element such as iron; an alloy such as stainless steel; or a molecular compound such as polymeric sulfur nitride.

An engineer must design a runway to accommodate airplanes that must reach a ground speed velocity of 61 m/s before they can take off. These planes are capable of accelerating at a rate of 2.5 m/s2.
a.) How long will it take the planes to reach takeoff speed?
b.)What must be the minimum length of the runway?

Answers

a) It will take 24.4 second the planes to reach takeoff speed.

b) The minimum length of the runway must be  744.2 meter.

What is acceleration?

Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.

Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Both effects contribute to the acceleration for all other motions.

Given parameters:

Acceleration of the plane: a = 2.5 m/s².

Final speed of the plane: v = 61 m/s.

Initial speed of the plane: u = 0 m/s.

Hence,  it will take the planes to reach takeoff speed = final speed/acceleration

= 61 m/s / 2.5 m/s²

= 24.4 second.

The minimum length of the runway must be = (final speed)²/(2×acceleration)

= ( 61)²/(2×2.5) meters

= 744.2 meter.

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ2

An automobile manufacturer claims that its
product will travel 0.4 km in 24 s, starting
from rest.
What is the magnitude of the constant acceleration required to do this?

Answers

Answer:

uncle

Explanation:why not

Two angles are complementary. The first angle measures 39º and the second angle
is 3y. What is the value of y?
O 51°
O 470
O 11°
O 17°

Answers

Answer:

11

Explanation:

i've been in k12 and i got an a on this anser

Hector is walking his dog (Fido) around the neighborhood. Upon arriving at
Fidella's house (a friend of Fido's), Fido turns part mule and refuses to continue
on the walk. Hector yanks on the chain with a 67.0 N force at an angle of 30.0°
above the horizontal. Determine the horizontal and vertical components of the
tension force.

Answers

If  Hector yanks on the chain with a 67.0 N force at an angle of 30.0°

above the horizontal, the horizontal and vertical components of the

tension force. is mathematically given as

Fx=58NFy=33.5N

What are the horizontal and vertical components of the tension force?

Generally, the equation for the coplanar forces  is mathematically given as

For x axis

Fx=67cos30

Fx=58N

For y axis

Fy=67sin30

Fy=33.5N

In conclusion, The horizontal and vertical components

Fx=58N

Fy=33.5N

Read more about Force

https://brainly.com/question/13370981

Random question? How many grains of sand are there in the entire world?

Answers

Answer:

five hundred quadrillion

Answer:

there is roughly 7.5 x 10^18 grains of sand, or even seven quintillion grains of sand on earth

Which of the following is a compound?
A. Na+
B. NaCl
C. Na
D. NaCl + Ag2O → AgCl + Na2O

Answers

I pretty sure it is A but I am not sure sorry if wrong

A. Na+ : cation

B. NaCl : compound

C. Na : element

D. NaCl + Ag2O → AgCl + Na2O : chemical reaction

Which is a characteristic of centripetal acceleration?

A. It is directed outward from the center of a circle.
B. It is directed inward, toward the center of a circle
C. It results in an object moving faster.
D. It results in an object moving slower.

Answers

Answer: The Answer is B. It is directed inward, toward the center of a circle.

Explanation:

The largest single entity in the universe is a black hole.
True
False

Answers

Adding letters since it needs to be 20 characters long:: answer: True.

If you pull up on a bucket with a tension force of 15 N and the bucket has a weight of 15 N, what is the net force acting on the bucket?
15 Nup
15 N down
30 N up
O N

Answers

Answer:

F = 0 [N]

Explanation:

To solve this problem we must perform a summation of forces in the direction of the vertical axis. Where the positive force is that of the tension of the upward force, while the force exerted by the weight is directed downward with a negative sign.

ΣF = 0

15 - 15 + F = 0

F = 0 [N]

lighting is to thunder as lunch

Answers

Answer:

is to meal

Explanation:

plz mark brainlest

How much work is done if you push a couch 10m across the floor with 5N of force?

Answers

Work = Force * Distance = 5N * 10m = 50Nm

Force: 5NDistance: 10m

Hope it helps!

Other Questions
Use the function f(x) to answer the questions: f(x) = 2x^2 x 10 Part A: What are the x-intercepts of the graph of f(x)? Show your work. (2 points) Part B: Is the vertex of the graph of f(x) going to be a maximum or a minimum? What are the coordinates of the vertex? Justify your answers and show your work. (3 points) Part C: What are the steps you would use to graph f(x)? Justify that you can use the answers obtained in Part A and Part B to draw the graph. (5 points) ent is true or false.TMJ1 Mechanical energy is the sum of an objects kinetic andpotential energy2 The kinetic theory of matter states that all of the particlesthat make up matter are in a fixed position.3 Heat is the energy transferred from an object at a highertemperature to an object at a lower temperature.a Which of the following choices is NOT considered an environmental stressor?A. Flashing LightsB. Heavy Traffic C. CancerD. Loud Noises alguien que me ayude porfavor, no quiero repetir.* hacer con la formula y=3x-3 I______I What would the equation be for this problem: What is the cost, "c" for a disc that is $13 plus $1.95 for shipping and handling when you buy "n" discs. 3^2 (94)^3 help please 2 points4. A list of products and the amounts needed to prepare a dish, followedby preparation instructions.O A. equivalentO B. portion sizeO C. product specificationD. recipe What military position does the first Vietnamese soldier the U.S. troopsencounter hold? The school that Brenda goes to is selling tickets to a fall musical. On the first day of the ticketsales the school sold 4 senior citizen tickets and 6 child tickets for a total of $76. The schooltook in $23 on the second day by selling 1 senior citizen ticket and 2 child tickets. What is theprice of one senior citizen ticket and one child ticket? Explain how the earliest philosophers arrived at the conclusion that "this primary entity(arche) always persists". Snow is falling steadily in Syracuse, New York. After 2 hours, 4 inches of snow has fallenIf it continues to snow at the same rate, how many inches of snow would you expect after 6.5 hours? If you get stuck, you can use the table to help. Sanyo Corporation manufactures a popular model of business calculators in a suburb of Seoul, South Korea. The production process goes through two departments: assembly and testing. The following information (in thousands of South Korean currency, the won) pertains to the testing department for the month of July. Work-in-Process Inventory, July 1 6,000 unitsTransferred-in costs 94,900 won (100% complete)added in July Direct materials 33,970 won (100% complete)Conversion 46,880 won (80% complete) During the month of July, 15,000 units were transferred in from the assembly department at the cost of 148,700 won, and the testing department added costs of 209,940 won, as follows: Direct materials 96,440 wonConversion 113,500 won During the month, 18,000 units were completed and transferred to the warehouse. At July 31, the completion percentage of Work-in-Process was as follows: Direct materials 90%Conversion 60%RequiredPrepare the production cost report of the testing department for the month of July using weightedaverage process costing. Help please need answers asap 4.3. If 2(4x + 3) - 12 = 3x - 6, then what value of x makesthe equation true?Answer with supporting work: Does anyone know the answer to number 2? Does respiration release or absorb energy? notice writingpls i need help Felica is trying to simplify the expression 9 + (8 x 9) - (18\3 PLEASE HELP! math is stressing me pls help me on this, ill give you brainliest