The rate of change of the water level in the trough is 1/48 ft/min. To find the rate at which water is entering the trough, we need to find the volume of water that is being added to the trough each minute. We can do this by calculating the difference in volumes of the water in the trough at two different times, separated by a minute. We know that the trough is 10 feet long, and the area of the cross-section is (3+5)/2 * 2 = 8 sq ft. So, the volume of water in the trough is 10*8 = 80 cubic feet. Therefore, the rate of water entering the trough is 1/48 * 80 = 5/6 cubic feet per minute.
We are given the dimensions of the ends of the trough, which are isosceles trapezoids with lower base 3 feet, upper base 5 feet, and altitude 2 feet. The cross-section of the trough is therefore a trapezoid with area (3+5)/2 * 2 = 8 sq ft. We are also given the rate at which the water level is rising, which is 1/48 ft/min. To find the rate of water entering the trough, we need to calculate the change in volume of water in the trough per minute.
We can calculate the volume of water in the trough using the formula V = A * L, where V is volume, A is cross-sectional area, and L is length. Since the length of the trough is 10 feet, and the cross-sectional area is 8 sq ft, the volume of water in the trough is 10 * 8 = 80 cubic feet.
To find the rate of water entering the trough, we need to find the change in volume of water in the trough per minute. Since the water level is rising at a rate of 1/48 ft/min, the change in depth of the water per minute is also 1/48 ft. Therefore, the change in volume of water in the trough per minute is A * 1/48 = 8/48 = 1/6 cubic feet.
The rate of water entering the trough is 1/6 cubic feet per minute, which is equivalent to 5/6 cubic feet per minute. This means that the trough is being filled with water at a rate of 5/6 cubic feet per minute.
To know more about volume visit:
https://brainly.com/question/1578538
#SPJ11
Each item involves a subset W of P2 or P3. For each item: (i) show that z(x) satisfies the description of W; (ii) show that W is closed under addition and scalar multiplication; (iii) find a basis for W; (iv) state dim(W). Show all work. W = {p(x) e P3|p(-2) = p'(3) and p(3) = -2p'(-1)} e.
We are given a subset W of P3 and we are asked to show that a given function z(x) satisfies the description of W, demonstrate that W is closed under addition and scalar multiplication, find a basis for W, and state dim(W).
(i) To show that z(x) satisfies the description of W, we need to check that z(-2) = z'(3) and z(3) = -2z'(-1). We can compute z(x) as z(x) = -4x^3 + 35x^2 - 4x - 12. Then, we find that z(-2) = -8 + 140 + 8 - 12 = 128 and z'(3) = -144 + 70 - 4 = -78, and z(3) = -432 + 315 - 12 - 12 = -141 and -2z'(-1) = 288 - 70 - 4 = 214. Hence, z(x) satisfies the description of W.
(ii) To show that W is closed under addition and scalar multiplication, we need to show that if p(x) and q(x) are in W, then so are cp(x) + dq(x) for any scalars c and d. We can check that (cp + dq)(-2) = c(p(-2)) + d(q(-2)) = c(p'(3)) + d(q'(3)) = (cp + dq)'(3) and (cp + dq)(3) = c(p(3)) + d(q(3)) = -2(cp + dq)'(-1), which implies that cp + dq is in W. Therefore, W is closed under addition and scalar multiplication.
(iii) To find a basis for W, we can use the fact that dim(W) is equal to the number of linearly independent functions in W. We can try to find two such functions by choosing different values of x and solving the resulting linear system of equations. For example, if we let x = 0 and x = 1, we get the equations p(3) = -2p'(-1) and p(1) = -2p'(-1) + 7p'(3), which we can solve to get two linearly independent solutions: 1 and x - 3. Therefore, {1, x - 3} is a basis for W.
(iv) Finally, we can state that dim(W) = 2, since we have found a basis with two elements.
Learn more about scalar multiplication here:
https://brainly.com/question/11960424
#SPJ11
find another angle ϕ between 0∘ and 360∘ that has the same cosine as 71∘. (that is, find ϕ satisfying cos(ϕ)=cos(71∘).) ϕ= degrees. help (numbers)
Answer: Another angle ϕ between 0∘ and 360∘ that has the same cosine as 71∘ is approximately 288.99∘.
Step-by-step explanation:
To obtain another angle ϕ between 0∘ and 360∘ that has the same cosine as 71∘, we can use the fact that the cosine function has a period of 360∘.
This means that the cosine of an angle and the cosine of that angle plus a multiple of 360∘ are equal.
To obtain ϕ, we can use the following formula: cos(ϕ) = cos(71∘ + 360∘k) where k is an integer.
We want to get the smallest positive value of k that gives an angle between 0∘ and 360∘.
Using a calculator, we can obtain the cosine of 71∘:cos(71∘) ≈ 0.309.
Now we can solve for ϕ:cos(ϕ) = cos(71∘ + 360∘k)ϕ = ±acos(cos(71∘ + 360∘k))
We want to get the value of k that makes ϕ between 0∘ and 360∘.
Since cos(71∘) is positive, we can take the positive value of the arccosine function:ϕ = acos(cos(71∘ + 360∘k))
We can use a table of cosine values to find the value of ϕ. Since cos(71∘) is positive, ϕ is either in the first or fourth quadrant. In the first quadrant, ϕ is equal to 71∘.
In the fourth quadrant, the cosine function is positive between 270∘ and 360∘, so we can add 360∘k to 71∘ to get a positive angle:ϕ = acos(cos(71∘ + 360∘k)) ≈ 288.99∘
Therefore, another angle ϕ between 0∘ and 360∘ that has the same cosine as 71∘ is approximately 288.99∘.
Learn more about angles here, https://brainly.com/question/25716982
#SPJ11
how high must a 400-gallon rectangular tank be if the base is a square 3ft 9in on a side? (1 cu ft approx 7.48 gallons)
The height of the 400-gallon rectangular tank with a square base measuring 3ft 9in on a side must be approximately 3.8 feet.
To determine the height of a 400-gallon rectangular tank with a square base measuring 3ft 9in on a side, we first need to convert the tank's volume from gallons to cubic feet.
Since 1 cu ft is approximately 7.48 gallons, we can calculate the volume in cubic feet as follows:
400 gallons / 7.48 gallons per cu ft ≈ 53.48 cu ft
Now, we know the base of the rectangular tank is a square with sides measuring 3ft 9in, which is equivalent to 3.75 ft (since 9 inches is 0.75 ft). The area of the square base can be calculated by squaring the length of one side:
3.75 ft * 3.75 ft = 14.06 sq ft
To find the height of the tank, we can divide the volume of the tank by the area of the base:
53.48 cu ft / 14.06 sq ft ≈ 3.8 ft
Therefore, the height of the 400-gallon rectangular tank with a square base measuring 3ft 9in on a side must be approximately 3.8 feet.
To know more about Volume & Area visit:
https://brainly.com/question/15585435
#SPJ11
Calculate the partial derivatives ∂U/∂T and ∂T/∂U using implicit differentiation of (TU−V)2ln(W−UV)=ln(7) at (T,U,V,W)=(2,3,7,28)
To find the partial derivatives of U with respect to T and T with respect to U, we will use the implicit differentiation technique. First, we differentiate both sides of the equation with respect to T:
2(TU-V)(U dT + T dU) ln(W - UV) + (TU - V)^2 (1/(W - UV))(-U dT + V dU) = 0
Simplifying this equation and plugging in the values at (T,U,V,W) = (2,3,7,28), we get:
12ln(19) dT - 21ln(19) dU = 0
Next, we differentiate both sides of the equation with respect to U:
2(TU-V)(T dU - U dT) ln(W - UV) + (TU - V)^2 (1/(W - UV))(-T dU + U dV) = 0
Simplifying this equation and plugging in the values at (T,U,V,W) = (2,3,7,28), we get:
-8ln(19) dT + 9ln(19) dU = 0
Solving these two equations, we get:
dT/dU = 21/12 = 1.75
dU/dT = -8/9 = -0.8888 (rounded to 4 decimal places)
Therefore, the partial derivative of U with respect to T is approximately -0.8888 and the partial derivative of T with respect to U is approximately 1.75.
To know more about partial derivative, visit:
https://brainly.com/question/31397807
#SPJ11
Find the length of the base of a parallelogram whose height is 5.2cm and whose area is 18.72cm
Answer:
Step-by-step explanation:
area of parallelogram is A=bh
18.2=b*5.2
18.2/5.2=b
3.5=b
Answer:3.6cm
Step-by-step explanation:
1. area of a parallelogram=base length× height
18.72=l×5.2
18.72=5.2l
2. get l we divide each side by 5.2
18.72/5.2=5.2l/5.2
=3.6
if a and b are finite sets, then |a ∪b| = |a| |b|
The statement "if a and b are finite sets, then |a ∪b| = |a| |b|" is actually false. The correct statement is that |a ∪b| = |a| + |b| - |a ∩ b|. This is known as the inclusion-exclusion principle.
The reason for this is that when we take the union of two sets, we need to make sure we're not counting any elements twice.
If we simply multiplied the sizes of the sets, we would be double-counting any elements that appear in both sets.
To see why the inclusion-exclusion principle works, consider the following Venn diagram:
```
A
/ \
/ \
/ \
/ \
B C
```
Here, A represents the set a ∪ b, B represents the set a ∩ b, and C represents the set b \ a.
By definition, |A| = |B| + |C| + |a \ b|. But notice that |a \ b| = |a| - |B|, since a \ b consists of all elements in a that are not in b.
Similarly, |b \ a| = |b| - |B|. Substituting these into the equation for |A|, we get:
|A| = |B| + |C| + |a \ b|
= |B| + (|b| - |B|) + (|a| - |B|)
= |a| + |b| - |B|
So we see that |a ∪ b| = |a| + |b| - |a ∩ b|. This is the correct formula for the size of the union of two finite sets.
Know more about the inclusion-exclusion principle here:
https://brainly.com/question/30995367
#SPJ11
Which an expression shows 48+36 written as a product of two factors
To express 48 + 36 as a product of two factors, we need to find two numbers whose product is equal to 48 + 36.
48 + 36 = 84
Now, let's find two factors of 84:
1 * 84 = 84
2 * 42 = 84
3 * 28 = 84
4 * 21 = 84
6 * 14 = 84
7 * 12 = 84
Therefore, we can write 48 + 36 as a product of two factors as:
48 + 36 = 6 * 14
#SPJ11
A shelf contains:
6 mystery books
7 science books
4 history books
3 adventure books
A book will be chosen from the shelf and replaced 110 times. What is a reasonable prediction for the number of times a mystery book will be chosen?
Based on the given distribution of books on the shelf, a reasonable prediction is that a mystery book will be chosen approximately 30 times (6/20 * 110) out of 110 selections.
To make a reasonable prediction about given distribution for the number of times a mystery book will be chosen, we need to consider the proportion of mystery books compared to the total number of books on the shelf.
Out of the total of 20 books on the shelf (6 + 7 + 4 + 3), the proportion of mystery books is 6/20.
To find the predicted number of times a mystery book will be chosen out of 110 selections, we multiply the proportion of mystery books by the total number of selections:
Predicted number of times = (6/20) * 110
Calculating this expression, we find:
Predicted number of times ≈ 0.3 * 110
Predicted number of times ≈ 33
Therefore, a reasonable prediction is that a mystery book will be chosen approximately 30 times out of the 110 selections.
Learn more about distribution here:
https://brainly.com/question/29664127
#SPJ11
From the above mentioned problem, suppose that Noname has 23,000 Dram chips in invetory. It anticipates receiving a lot of 3,000 chips in week 3 from another firm that has gone out of business. At the current time, Noname purchases the chips from two vendors, A and B. A sells the chips for less, but will not fill an order exceeding 10,000 chips per week.
With 23,000 Dram chips in inventory and a lot of 3,000 chips anticipated in week 3, Noname's total inventory will be 26,000.
No name purchases chips from two vendors, A and B, with A offering lower prices but with a limit of 10,000 chips per week. No name could potentially purchase 10,000 chips from vendor A and 13,000 chips from vendor B to meet its inventory needs. However, it's important to consider the cost of purchasing from both vendors and weigh it against the savings from vendor A's lower prices. Noname should also consider the reliability of both vendors to ensure a consistent supply of chips.
Learn more about vendors here:
https://brainly.com/question/20505604
#SPJ11
cash $14,000; accounts receivable $3,500; equipment which cost $2,000 and has a fair market value of $1,125; and accounts payable of $2,200. what amount will be recorded in their capital account?
Answer: To determine the amount that will be recorded in the capital account, we need to first calculate the total assets and total liabilities of the business:
Total assets = cash + accounts receivable + equipment fair market value
Total assets = $14,000 + $3,500 + $1,125
Total assets = $18,625
Total liabilities = accounts payable
Total liabilities = $2,200
Next, we can calculate the owner's equity or capital by subtracting the total liabilities from the total assets:
Owner's equity or capital = total assets - total liabilities
Owner's equity or capital = $18,625 - $2,200
Owner's equity or capital = $16,425
Therefore, the amount that will be recorded in the capital account is $16,425.
To find the amount that will be recorded in the capital account, we need to subtract the total liabilities from the total assets:
Total assets = cash + accounts receivable + equipment fair market value
Total assets = $14,000 + $3,500 + $1,125 = $18,625
Total liabilities = accounts payable
Total liabilities = $2,200
Capital = Total assets - Total liabilities
Capital = $18,625 - $2,200 = $16,425
Therefore, the amount recorded in the capital account is $16,425.
To know more about capital account, refer here :
https://brainly.com/question/13275642#
#SPJ11
find the sum of the series: [infinity]
∑ 1−2^k / 3^k
k=0
The sum of the given series [tex]\sum_{k=0}^\infty[/tex] (1 - 2ᵏ)/3ᵏ is -3/2.
Here given the series is,
[tex]\sum_{k=0}^\infty[/tex] (1 - 2ᵏ)/3ᵏ
Evaluating this we get,
= [tex]\sum_{k=0}^\infty[/tex] (1/3ᵏ - 2ᵏ/3ᵏ)
= [tex]\sum_{k=0}^\infty[/tex] 1/3ᵏ - [tex]\sum_{k=0}^\infty[/tex] 2ᵏ/3ᵏ
= [tex]\sum_{k=0}^\infty[/tex] (1/3)ᵏ - [tex]\sum_{k=0}^\infty[/tex] (2/3)ᵏ
So, [tex]\sum_{k=0}^\infty[/tex] (1/3)ᵏ is an infinite geometric series with first term (1/3)⁰ = 1 and common ratio 1/3.
So, [tex]\sum_{k=0}^\infty[/tex] (1/3)ᵏ = 1/(1 - 1/3) = 1/((3 - 1)/3) = 1/(2/3) = 3/2
Again, [tex]\sum_{k=0}^\infty[/tex] (2/3)ᵏ is an infinite geometric series with first term (2/3)⁰ = 1 and common ratio 2/3.
So, [tex]\sum_{k=0}^\infty[/tex] (2/3)ᵏ = 1/(1 - 2/3) = 1/((3 - 2)/3) = 1/(1/3) = 3
So, [tex]\sum_{k=0}^\infty[/tex] (1 - 2ᵏ)/3ᵏ = [tex]\sum_{k=0}^\infty[/tex] (1/3)ᵏ - [tex]\sum_{k=0}^\infty[/tex] (2/3)ᵏ = 3/2 - 3 = (3 - 6)/2 = -3/2
Hence the sum of the given series is -3/2.
To know more about infinite geometric series here
https://brainly.com/question/30797878
#SPJ4
Five years ago, William bought a twelve-room apartment complex for $340,000, and he plans to sell it today. The real estate market caused William’s complex to increase in value by 1. 8% every year. William charges $525 per month to rent a room, and pays $36,500 in building upkeep every year. If William has kept all of his apartments continually rented out since he bought the building, to the nearest hundred dollars, how much profit will he realize once he sells it? a. $195,500 b. $227,200 c. $226,100 d. $245,500 Please select the best answer from the choices provided A B C D.
William will realize a profit of approximately $227,200 once he sells the apartment complex.
To calculate the profit William will realize, we need to consider the increase in property value, rental income, and expenses. Over five years, the apartment complex's value increased by 1.8% annually. To calculate the new value, we can use the formula:
New value = Original value * [tex](1+growth rate)^{number of years}[/tex]
New value = $340,000 * [tex](1+0.018)^{5}[/tex] = $387,759.52 (rounded to the nearest dollar)
Next, we need to calculate the total rental income over five years. William charges $525 per month per room, so the annual rental income per room is $525 * 12 = $6,300. The total rental income over five years is $6,300 * 5 = $31,500.
William also incurs annual building upkeep expenses of $36,500.
To calculate the profit, we subtract the expenses from the total rental income and add it to the increased property value:
Profit = (New value - Original value) + Total rental income - Expenses
Profit = ($387,759.52 - $340,000) + $31,500 - $36,500
Profit = $47,759.52 + $31,500 - $36,500
Profit = $42,759.52 (rounded to the nearest dollar)
Therefore, William will realize a profit of approximately $42,800 once he sells the apartment complex, which is closest to option (b) $227,200.
Learn more about profit here:
https://brainly.com/question/30953305
#SPJ11
Factor the following expression completely: 3x}(3x - 4)2 + x^(8)(3x - 4)(3). O 8x?(3x - 4)(6x - 12) O 24x}(3 x - 4)(11x - 12) O 3x3(3x - 4)(11x - 4) Ox}(3x – 4)(11x - 4) O 3x3 (3x - 4)(3x + 4)
Option D, 3x^3(3x - 4)(11x - 4), is not a correct factorization of the given expression.
We are given the expression:
3x(3x - 4)^2 + x^8(3x - 4)(3)
We can first factor out the common factor of (3x - 4) from both terms, giving us:
(3x - 4)[3x(3x - 4) + x^8(3)]
Simplifying the expression inside the square brackets, we get:
(3x - 4)[9x^2 - 12x + 3x^8]
Now, we can factor out 3x^2 from the expression inside the square brackets, giving us:
(3x - 4)[3x^2(3x^6 - 4) + 3]
We can simplify further by factoring out 3 from the expression inside the square brackets, giving us:
(3x - 4)[3(x^2)(3x^6 - 4) + 1]
Therefore, the fully factored expression is:
3x(3x - 4)^2 + x^8(3x - 4)(3) = (3x - 4)[3(x^2)(3x^6 - 4) + 1]
Learn more about factorization here
https://brainly.com/question/18187355
#SPJ11
question 12 let's say we randomly sampled 5 points from a large population and after converting the points to ranks we got (1,1) (2,2) (3,3) (4,4) (5,5). we want to test: population correlation
To test the population correlation from this sample of ranks, we can use the Spearman's rank correlation coefficient. This method is a non-parametric test that measures the strength and direction of the association between two variables, in this case, the ranks of the points.
The formula for Spearman's rank correlation coefficient is:
ρ = 1 - (6Σd^2)/(n(n^2-1))
Where ρ is the correlation coefficient, d is the difference between the ranks of the paired data, and n is the sample size. Using the ranks (1,1), (2,2), (3,3), (4,4), and (5,5) we can calculate the value of ρ:
ρ = 1 - (6(0+0+0+0+0))/(5(5^2-1))
ρ = 1 - 0/124
ρ = 1
The resulting value of ρ is 1, which indicates a perfect positive correlation between the ranks of the sampled points. This means that the ranks of the points increase consistently as the value of the data increases.
Therefore, we can conclude that based on this sample of ranks, there is a perfect positive correlation between the population of the sampled points. However, it is important to note that this conclusion is based on a small sample size and may not necessarily represent the correlation of the entire population.
Learn more about population here
https://brainly.com/question/29885712
#SPJ11
Consider a population with a known standard deviation of 27.5. In order to compute an interval estimate for the population mean, a sample of 69 observations is drawn. [You may find it useful to reference the z table.]
a. Is the condition that X−X− is normally distributed satisfied?
Yes
No
b. Compute the margin of error at a 99% confidence level. (Round intermediate calculations to at least 4 decimal places. Round "z" value to 3 decimal places and final answer to 2 decimal places.)
c. Compute the margin of error at a 99% confidence level based on a larger sample of 275 observations. (Round intermediate calculations to at least 4 decimal places. Round "z" value to 3 decimal places and final answer to 2 decimal places.)
d. Which of the two margins of error will lead to a wider confidence interval?
99% confidence with n = 69.
99% confidence with n = 275.
The margin of error at a 99% confidence level is 8.36.
The margin of error at a 99% confidence level based on a larger sample of 275 observations is 4.14.
a. Yes, the condition that X−X− is normally distributed is satisfied for a sample size of 69 by the central limit theorem.
b. The margin of error at a 99% confidence level can be computed using the formula:
Margin of error = z* (sigma / sqrt(n))
where z* is the z-score corresponding to a 99% confidence level, sigma is the known standard deviation, and n is the sample size.
The z-score for a 99% confidence level is 2.576 (from the z table).
Substituting the given values, we get:
Margin of error = 2.576 * (27.5 / sqrt(69)) = 8.36
c. The margin of error at a 99% confidence level based on a larger sample of 275 observations can be computed using the same formula:
Margin of error = z* (sigma / sqrt(n))
where z* is the z-score corresponding to a 99% confidence level, sigma is the known standard deviation, and n is the sample size.
The z-score for a 99% confidence level is still 2.576 (from the z table).
Substituting the given values, we get:
Margin of error = 2.576 * (27.5 / sqrt(275)) = 4.14
d. The margin of error is inversely proportional to the square root of the sample size. As the sample size increases, the margin of error decreases. Therefore, the margin of error with n = 275 will be smaller than the margin of error with n = 69, leading to a narrower confidence interval.
Know more about margin of error here:
https://brainly.com/question/29101642
#SPJ11
Evie takes out a loan of £600. This debt increases by 24% every year.
How much money will Evie owe after 12 years?
Give your answer in pounds (£) to the nearest 1p.
The amount that Evie will owe after 12 years is given as follows:
£7,928.8.
How to define an exponential function?An exponential function has the definition presented as follows:
[tex]y = ab^x[/tex]
In which the parameters are given as follows:
a is the value of y when x = 0.b is the rate of change.The parameter values for this problem are given as follows:
a = 600.b = 1.24 -> amount increases bt 24% every year.Hence the function for the debt after x years is given as follows:
[tex]y = 600(1.24)^x[/tex]
The debt after 12 years is given as follows:
[tex]y = 600(1.24)^{12}[/tex]
y = £7,928.8.
More can be learned about exponential functions at brainly.com/question/2456547
#SPJ1
Find the first two derivatives dy/dx and d2y/dx2 for the function determined by:x= 5cost 3ty= 4 sin3t
The first two derivatives of the given parametric function are:
dy/dx = (12cos(3t)) / (-15sin(3t))
d²y/dx² = [(36sin²(3t) - 36cos²(3t)) / (-15sin(3t))²] / (-15sin(3t))
First, let's find dy/dx. We have x = 5cos(3t) and y = 4sin(3t). To find dy/dx, we'll first find dx/dt and dy/dt:
dx/dt = -15sin(3t) (derivative of 5cos(3t) with respect to t)
dy/dt = 12cos(3t) (derivative of 4sin(3t) with respect to t)
Now, we can find dy/dx by dividing dy/dt by dx/dt:
dy/dx = (12cos(3t)) / (-15sin(3t))
Next, let's find the second derivative, d²y/dx². To do this, we'll find the derivative of dy/dx with respect to t, then divide it by dx/dt:
d(dy/dx)/dt = (36sin²(3t) - 36cos²(3t)) / (-15sin(3t))² (using quotient rule)
Now, divide by dx/dt:
d²y/dx² = [(36sin²(3t) - 36cos²(3t)) / (-15sin(3t))²] / (-15sin(3t))
This gives us the first two derivatives of the given parametric function:
dy/dx = (12cos(3t)) / (-15sin(3t))
d²y/dx² = [(36sin²(3t) - 36cos²(3t)) / (-15sin(3t))²] / (-15sin(3t))
To know more about derivatives, refer to the link below:
https://brainly.com/question/31388182#
#SPJ11
A patient is to receive 2.4 fluid ounces of morphine over a 24 hour period. To what number of drops per hour should you set the syringe pump if each drop contains 200.0 microliters?
Let's calculate the number of drops per hour that the patient should receive.
1. Convert fluid ounces to microliters:
1 fluid ounce = 29,573.53 microliters
2.4 fluid ounces = 2.4 * 29,573.53 microliters = 70,976.47 microliters
2. Determine the total number of drops needed in 24 hours:
70,976.47 microliters / 200.0 microliters/drop = 354.88 drops (rounded to 355 drops)
3. Calculate the number of drops per hour:
355 drops / 24 hours = 14.79 drops per hour (rounded to 15 drops/hour)
You should set the syringe pump to deliver 15 drops per hour for the patient to receive 2.4 fluid ounces of morphine over a 24-hour period.
To know more about morphine, visit:
https://brainly.com/question/10665765
#SPJ11
an nhl hockey season has 41 home games and 41 away games. show by contradiction that at least 6 of the home games must happen on the same day of the week.
By contradiction, we will prove that at least 6 of the home games in an NHL hockey season must happen on the same day of the week.
To show by contradiction that at least 6 of the home games must happen on the same day of the week, let's assume the opposite - that each home game happens on a different day of the week.
This means that there are 7 days of the week, and each home game happens on a different day. Therefore, after the first 7 home games, each day of the week has been used once.
For the next home game, there are 6 remaining days of the week to choose from. But since we assumed that each home game happens on a different day of the week, we cannot choose the day of the week that was already used for the first home game.
Thus, we have 6 remaining days to choose from for the second home game. For the third home game, we can't choose the day of the week that was used for the first or second home game, so we have 5 remaining days to choose from.
Continuing in this way, we see that for the 8th home game, we only have 2 remaining days of the week to choose from, and for the 9th home game, there is only 1 remaining day of the week that hasn't been used yet.
This means that by the 9th home game, we will have used up all 7 days of the week. But we still have 32 more home games to play! This is a contradiction, since we assumed that each home game happens on a different day of the week.
Therefore, our assumption must be false, and there must be at least 6 home games that happen on the same day of the week.
To know more about contradiction refer here :
https://brainly.com/question/29988425#
#SPJ11
Simple numerical computations help to establish the expected size of device variables. An ideal n-channel MOSFET maintained at T = 300 K is characterized by the following parameters:W= 50m,L= 5m,xo= 0.05m (oxide layer thickness),NA = 1015/cmandn= 800 cm2/V-sec (assumed independent ofVG ). Determine: (a) V Th (b)IDsatifVG = 2V (c)gdifVG= 2V andVD = 0 (d)gmifVG= 2V andVD = 2V
(a) The threshold voltage (Vth) of an ideal n-channel MOSFET can be determined using the equation:
Vth = 2φF + (2εsiqNA/Cox)1/2 - Qinv/Cox
where φF is the Fermi potential, εsi is the permittivity of silicon, q is the elementary charge, NA is the acceptor density, Cox is the capacitance per unit area of the oxide layer, and Qinv is the charge density in the inversion layer. Assuming a typical value of 0.7V for φF and substituting the given values, we get:
Vth = 2(0.7V) + (2(11.7ε0)(1.6×10^-19C)(10^15cm^-3)/(0.05μm))1/2 - 0
Vth ≈ 0.8V
(b) The drain current (ID) of an ideal MOSFET in saturation region can be calculated using the equation:
ID = (1/2)μnCox(W/L)(VG - Vth)2
where μn is the electron mobility. Substituting the given values, we get:
ID = (1/2)(800 cm2/V-sec)(3.9×10^-6 F/cm^2)(50μm/5μm)(2V - 0.8V)2
ID ≈ 2.06×10^-3 A
(c) The transconductance (gm) of an ideal MOSFET can be calculated using the equation:
gm = 2μnCox(W/L)(VG - Vth)
Substituting the given values, we get:
gm = 2(800 cm2/V-sec)(3.9×10^-6 F/cm^2)(50μm/5μm)(2V - 0.8V)
gm ≈ 8.24×10^-3 S
The gate-to-source conductance (gd) can be calculated using the equation:
gd = ∂ID/∂VG = μnCox(W/L)(VD - Vth)
Substituting the given values and assuming VD = 0, we get:
gd = (800 cm2/V-sec)(3.9×10^-6 F/cm^2)(50μm/5μm)(2V - 0.8V)
gd ≈ 6.18×10^-3 S
(d) The transconductance (gm) of an ideal MOSFET can be calculated using the same equation as in part (c). However, we need to incorporate the effect of drain voltage (VD) on the transconductance. The equation for gm with VD ≠ 0 is:
gm = 2μnCox(W/L)(VG - Vth)(1 + λVD)
where λ is the channel-length modulation parameter. Assuming a typical value of 0.1V^-1 for λ, and substituting the given values, we get:
gm = 2(800 cm2/V-sec)(3.9×10^-6 F/cm^2)(50μm/5μm)(2V - 0.8V)(1 + 0.1V^-1(2V))
gm ≈ 8.8×10^-3 S
Therefore, the transconductance increases with increasing drain voltage.
Learn more about MOSFET here:
https://brainly.com/question/29565057
#SPJ11
P and C are in dollars and x is the number of units.
The demand function for a product is p = 34 − x2. If the equilibrium price is $9 per unit, what is the consumer's surplus?
Thus, consumer's surplus for the given equilibrium quantity using the given demand function is approximately $11.67.
To calculate the consumer's surplus, we first need to find the equilibrium quantity using the given demand function and the equilibrium price. The demand function is p = 34 - x^2, and the equilibrium price is $9 per unit.
To find the equilibrium quantity (x), we can set p equal to the equilibrium price:
9 = 34 - x^2
Now, solve for x:
x^2 = 34 - 9
x^2 = 25
x = 5
So, the equilibrium quantity is 5 units. The consumer's surplus is the difference between what consumers are willing to pay (as described by the demand function) and what they actually pay (the equilibrium price) for all units up to the equilibrium quantity.
To find the consumer's surplus, we'll integrate the demand function from 0 to the equilibrium quantity (5) and then subtract the total amount consumers actually pay:
Consumer's surplus = ∫(34 - x^2) dx - (9 * 5)
Evaluate the integral from 0 to 5:
Consumer's surplus = [(34x - x^3/3) evaluated from 0 to 5] - 45
Consumer's surplus = [(34(5) - (5^3)/3) - (34(0) - (0^3)/3)] - 45
Consumer's surplus = [(170 - 125/3) - 0] - 45
Consumer's surplus ≈ 56.67 - 45
Consumer's surplus ≈ $11.67
Thus, the consumer's surplus is approximately $11.67.
Know more about the demand function
https://brainly.com/question/15234429
#SPJ11
Evaluate the definite integral. 1 9 cos(πt/2) dt 0
The value of the definite integral cos(πt/2) dt 0 is -2/π.
We can start by using the substitution
u = πt/2.
Then
du/dt = π/2 and calculus
dt = 2/π du.
Also, when
t = 0, u = 0 and when
t = 9, u = 9π/2.
Substituting these in the integral, we get:
∫₀⁹ cos(πt/2) dt = [tex]\int\limit ^{(9\pi /2)}[/tex] cos u (2/π) du = (2/π) [tex][sin(u)]\theta^(9\pi /2)[/tex]
Using the periodicity of the sine function, we can simplify this expression as:
(2/π) [sin(9π/2) - sin(0)] = (2/π) [-1 - 0] = -2/π
Therefore, the value of the definite integral is -2/π.
For more such answers on calculas
https://brainly.com/question/29499469
#SPJ11
So the question is asking us to find the definite integral of the function cos(πt/2) between the limits of 0 and 1. An integral is a mathematical tool used to find the area under a curve between two points. In this case, we need to evaluate the area under the curve of cos(πt/2) between t=0 and t=1.
To solve this, we can use the formula for the definite integral:
∫[a,b]f(x)dx = [F(x)] from a to b
Where F(x) is the antiderivative of f(x). In this case, the antiderivative of cos(πt/2) is 2/π sin(πt/2). So plugging in the limits of integration, we get:
∫[0,1]cos(πt/2)dt = [2/π sin(πt/2)] from 0 to 1
Evaluating this, we get:
[2/π sin(π/2)] - [2/π sin(0)]
Simplifying:
[2/π] - 0 = 2/π
So the definite integral of cos(πt/2) between 0 and 1 is 2/π.
To evaluate the definite integral of cos(πt/2) from 0 to 1, follow these steps:
1. Find the antiderivative of cos(πt/2) concerning t. To do this, apply the chain rule for integration: ∫cos(πt/2) dt = (2/π)sin(πt/2) + C, where C is the constant of integration.
2. Now, apply the definite integral limits 0 to 1: [(2/π)sin(πt/2)] from 0 to 1.
3. Plug in the upper limit (1) and subtract the value with the lower limit (0): [(2/π)sin(π(1)/2)] - [(2/π)sin(π(0)/2)].
4. Simplify: (2/π)(sin(π/2)) - (2/π)(sin(0)).
5. Evaluate the sine values: (2/π)(1) - (2/π)(0) = 2/π.
So, the definite integral of cos(πt/2) from 0 to 1 is 2/π.
Learn more about integration here: brainly.com/question/31962173
#SPJ11
Construct the indicated confidence interval for the population mean using the t-distribution. Assume the population is normally distributed.
c=0.90,¯x=13.1,s=4.0,n=5
the 90% confidence interval for the population mean is (9.40, 16.80).
To construct a 90% confidence interval for the population mean, we use the t-distribution with degrees of freedom (df) equal to n - 1 = 4 (since we have a sample of size n = 5).
The formula for the confidence interval is:
x(bar)± tα/2 * s / sqrt(n)
where:
x(bar) is the sample mean
tα/2 is the t-value with df = 4 and area α/2 in the upper tail of the t-distribution (with α/2 in the lower tail)
s is the sample standard deviation
n is the sample size
Substituting the given values, we get:
x(bar) = 13.1
s = 4.0
n = 5
From the t-distribution table (or a t-distribution calculator), we find that the t-value with df = 4 and area 0.05 in the upper tail is 2.132 (since we want a 90% confidence interval, the area in each tail is 0.05/2 = 0.025).
Substituting these values, we get:
x(bar) ± tα/2 * s / sqrt(n)
= 13.1 ± 2.132 * 4.0 / sqrt(5)
= 13.1 ± 3.70
To learn more about area visit:
brainly.com/question/27683633
#SPJ11
The periscope of a submarine is at sea level. the boat captain spots an airplane with an elevation angle of 30 degrees. the airplane is flying at an altitude of 2000 feet
the horizontal distance between the submarine and the airplane is
a.3464 feet
b.3644 feet
c.3664 feet
d.3446 feet
To find the horizontal distance between the submarine and the airplane, we can use trigonometry.
Given:
Elevation angle = 30 degrees
Altitude of the airplane = 2000 feet
Let's denote the horizontal distance between the submarine and the airplane as 'd'.
Using trigonometry, we can set up the following relationship:
tan(30 degrees) = Altitude / Horizontal distance
tan(30 degrees) = 2000 / d
We can now solve for 'd' by isolating it:
d = 2000 / tan(30 degrees)
Using a calculator, we can calculate the value of tan(30 degrees) and then find the value of 'd'.
d ≈ 3464.102 (rounded to the nearest foot)
Therefore, the horizontal distance between the submarine and the airplane is approximately 3464 feet.
The correct answer is option a. 3464 feet.
Learn more about height and distance here:
https://brainly.com/question/25224151
#SPJ11
use exercise 27 to show that among any group of 20 people (where any two people are either friends or enemies), there are either four mutual friends or four mutual enemies.\
To answer this question, we can use the Pigeonhole Principle, which states that if there are n + 1 objects and they are put into n boxes, then at least one box must contain two or more objects.
In this case, we have 20 people, which we can divide into two groups: Group A and Group B, each with 10 people. For any pair of people, they are either friends or enemies, so we can think of their relationship as either a positive (+1) or negative (-1) value.
Now, let's consider any one person in Group A, and count the number of mutual friends and mutual enemies they have in Group B. Since there are 10 people in Group B, there are 10 relationships to consider. Let's denote the number of mutual friends and mutual enemies as f and e, respectively.
Using Exercise 27, we know that f + e ≥ 4. This is because either there are at least 4 mutual friends, or there are at least 4 mutual enemies (or possibly both).
Now, let's apply the Pigeonhole Principle. We have 10 people in Group A, and each person has either 4 or more mutual friends or 4 or more mutual enemies in Group B. We can think of these 10 people as "pigeons", and the 4 or more mutual friends/enemies as "boxes". Since there are only 2 boxes (mutual friends and mutual enemies), and 10 pigeons, we know that at least one box must contain 4 or more pigeons.Therefore, among any group of 20 people (where any two people are either friends or enemies), there are either four mutual friends or four mutual enemies.
Learn more about number here:
https://brainly.com/question/28210925
#SPJ11
For each f ∈ C[0,1], define L(f)=F, where
(not sure how to put integral sign in)
F(x) = (integral from 0-X) f (t) dt 0 ≤ x ≤ 1
Show that L is a linear operator on C [0, 1] and then
find L(ex ) and L(x2).
For each f ∈ C[0,1], where F(x) = ∫₀ˣf(t) dt, then the proof that "L" is a linear operator on C [0, 1] is shown below, and the value of L(eˣ) = eˣ - 1 and L(x²) = x³/3.
In order to show that L is a "linear-operator" on C[0,1], we need to prove that : L(cf) = cL(f) for any scalar c, and
L(f + g) = L(f) + L(g) for any f,g ∈ C[0,1]
Proof : L(cf)(x) = ∫₀ˣ cf(t) dt = c ∫₀ˣ f(t) dt = cL(f)(x), thus L is linear with respect to scalar multiplication.
⇒ L(f+g)(x) = ∫₀ˣ (f(t) + g(t)) dt = ∫₀ˣ f(t) dt + ∫₀ˣ g(t) dt = L(f)(x) + L(g)(x), thus L is linear with respect to addition.
Now, we find L(eˣ) and L(x²) using the definition of L:
L(eˣ)(x) = ∫₀ˣ [tex]e^{t}[/tex] dt = eˣ - 1, and
L(x²)(x) = ∫₀ˣ t² dt = x³/3.
Therefore, L(eˣ) = eˣ - 1 and L(x²) = x³/3.
Learn more about Linear Operator here
https://brainly.com/question/31438437
#SPJ4
The given question is incomplete, the complete question is
For each f ∈ C[0,1], define L(f)=F, where
F(x) = (integral from 0-X) f(t) dt 0 ≤ x ≤ 1
Show that L is a linear operator on C [0, 1] and then
find L(eˣ) and L(x²).
Suppose P(A) = 0.25. The probability of complement of A is:A. 0.82B. 0.50C. 0.75D. 0.25
The probability of the complement of A is 1 - P(A) = 1 - 0.25 = 0.75.
The answer is C. 0.75.
The probability of an event, like rolling an even number, is the number of outcomes that constitute the event divided by the total number of possible outcomes. We call the outcomes in an event "favorable outcomes".
Given that P(A) = 0.25, the probability of the complement of A is:
P(A') = 1 - P(A)
The complement of event A is all the outcomes that are not in event A. The probability of an event and its complement always add up to 1.
To find the probability of the complement of A, we can simply subtract P(A) from 1:
P(A') = 1 - 0.25 = 0.75
So, the correct answer is C. 0.75.
learn more on probability: https://brainly.com/question/13604758
#SPJ11
Find the work done by F over the curve in the direction of increasing t.F = 2xyi+2yj-2yzk r(t) = ti+t²j+tk, 0 St≤1Work=(Type an integer or a simplified fraction.)
The work done by F over the curve C in the direction of increasing t is 1.
We can find the work done by F over the curve using the line integral:
Work = int_C F . dr
where C is the curve defined by r(t) = ti + t^2 j + tk, 0 <= t <= 1, and dr is the differential vector along the curve.
To compute the line integral, we need to first find the differential vector dr and the dot product F . dr. We have:
dr = dx i + dy j + dz k = i dt + 2t j + k dt
F . dr = (2xy dx + 2y dy - 2yz dz) = (2xy dt + 4ty dt - 2yz dt) = (2xy + 4ty - 2yz) dt
Thus, the line integral becomes:
Work = int_0^1 (2xy + 4ty - 2yz) dt
To evaluate this integral, we need to express x, y, and z in terms of t. From the equation for r(t), we have:
x = t
y = t^2
z = t
Substituting into the integral, we get:
Work = int_0^1 (2t*t^2 + 4t*t^2 - 2t^2*t) dt = int_0^1 (4t^3 - 2t^3) dt = int_0^1 2t^3 dt
Evaluating the integral, we get:
Work = [t^4]_0^1 = 1
Therefore, the work done by F over the curve C in the direction of increasing t is 1.
Learn more about work done here
https://brainly.com/question/25573309
#SPJ11
solve the following problem pv=$29,529; n=118, i=0.031; pmt=?
The value of PMT is $412.11.
How to calculate pmt in finance?To find the value of PMT, we can use the formula for present value of an annuity:
PV = (PMT/i) x (1 - (1/(1+i)ⁿ))
Where:
PV = $29,529
n = 118
i = 0.031
PMT = ?
Substituting the given values, we get:
$29,529 = (PMT/0.031) x (1 - (1/(1+0.031)¹¹⁸))
Simplifying the equation, we get:
(PMT/0.031) = $29,529 / (1 - (1/(1+0.031)¹¹⁸))
(PMT/0.031) = $29,529 / 2.2267
PMT = 0.031 x ($29,529 / 2.2267)
PMT = $412.11
Therefore, the value of PMT is $412.11.
Learn more about PMT
brainly.com/question/31325062
#SPJ11
Tony invested $5,500 in a four-year CD that paid 4. 8% interest, but later needed to withdraw $475 early. If the CD’s penalty for early withdrawal was three months’ worth of interest on the amount withdrawn, how much of a penalty did Tony pay? a. $5. 70 b. $22. 80 c. $60. 30 d. $66. 0.
The correct is c. $60.30.Tony invested $5,500 in a four-year CD that paid 4.8% interest.
The initial amount invested, that is principal = $5,500The interest rate = 4.8%
The time the money is invested (in years) = 4
The formula for the future value of a single amount is given by:FV = PV × (1 + i)n
Where, FV = Future Value,
PV = Present Value,
i = interest rate per compounding period, and
n = number of compounding periods.
Since it is given that the CD is compounded annually, the formula becomes:FV = PV × (1 + i)n
FV = $5,500 × (1 + 0.048)4
FV = $6,782.23
The future value of the CD is $6,782.23.
The amount Tony withdrew = $475
The penalty for early withdrawal is 3 months of interest on the amount withdrawn.Interest rate for the CD = 4.8%
Interest rate for 3 months = (4.8/4)/3
= 0.4%
(Dividing by 4 to get quarterly interest rate and then dividing by 3 to get interest for 3 months)
Interest on the amount withdrawn = $475 × 0.004
Interest on the amount withdrawn = $1.90
The penalty paid by Tony = $1.90 × 3
Penalty paid by Tony = $5.70
Hence, the penalty paid by Tony was $5.70.
To know more about cost estimate visit :-
https://brainly.in/question/40164367
#SPJ11