Answer:
22Km/sec
Explanation:
What is 8 x 10-2 in ordinary form?
78 is the answer hope it helps
Mickey had three substances. He hit each of them with a hammer. A red
substance was malleable and easily flattened. A white crystal cracked but did
not break. A silver substance flattened but did not crack. Which two
statements could be true?
A. The silver substance is a metal,
B. The red substance is ionic,
C. The silver substance is ionic.
I D. The white substance is ionic.
Answer:
A & D
Explanation:
Took the test already
The two statements that could be true on the basis of the information given in the question are as follows:
The silver substance is metal.The white substance is ionic.Thus, the correct options are A and D.
What are the properties of metal?The properties of the metal are described as follows:
They are good conductors of heat and electricity.They possess high melting points and high density. They are malleable, ductile, and lustrous in nature. They are generally hard as compared to other elements.The silver substance is metal because it is flattened into thin sheets but did not crack. This shows the property of malleability of metals. The white substance is ionic because it is cracked but did not break. It shows that ionic compounds are tough to break.
A red substance is also metal but does not express in any options.
Therefore, the correct options for this question are A and D.
To learn more about the Properties of metal, refer to the link:
https://brainly.com/question/1301107
#SPJ5
As time goes on, the ENTROPY in a closed system should increase. This is because of which Law?
A) Conservation of Energy
B) Conservation of Momentum
C) 1st Law of Thermodynamics
D) 2nd Law of Thermodynamics
E) None of these
Answer:
The answer is D
The second law of thermodynamics
The results from Rutherford's alpha particle scattering experiment led to
the nuclear model. Alpha particles were fired at a thin film of gold at a
speed of 7% of the speed of light. Determine the speed of the alpha
particles. Speed of light = 300,000,000 m/s
Answer:
Explanation:
Can you help me in mathematics
Science Question: why do astronauts wear organge suits vs white suits
Follow answer please...
name one material through which continuous flow of charge can be produced from heat energy
Answer:
A continuous flow of negative charges (electrons) creates an electric current. The pathway taken by a electric current is a circuit.
Explanation:
Answer:
Copper, and aluminum
Explanation:
How can you defined work done in term of kinetic energy, potential energy, and the force?
What is the velocity of a wave that has a frequency of 200 Hz and a
wavelength of 0.5m?
Answer:
No idea now
Explanation:
wil get back to you in few minutes
Why is the Greenland ice sheet so important to understanding earths past climate?
Answer:
The ice sheet as a record of past climates
Scientists have, using those ice cores, obtained information on (proxies for) temperature, ocean volume, precipitation, chemistry and gas composition of the lower atmosphere, volcanic eruptions, solar variability, sea-surface productivity, desert extent and forest fires.
Answer:
The Greenland ice sheet is the last remaining ice sheet from the most recent ice age. Therefore, it can tell scientists about the climate conditions of that period.
Explanation:
A 24 kg object, initially moving at 20 m/s, is slowed by an applied force of 20 N to a final velocity of 16 m/s. How much time did this take?
Answer:
Explanation:
Turtle ba lls
Answer:
4.8 seconds
Explanation:
Ft=change in momentum
Initial momentum=mv=24*20=480 kg*m/s
new momentum=mv=24*16=384 kg*m/s
change in momentum=96 kg*m/s
Ft=change in momentum
20(t)=96
t=4.8 seconds!
A rubber ball moving at a speed of 5 m/s hit a flat wall and returned to the thrower at 5 m/s. Which statement
correctly describes the momentum of the rubber ball?
a. Its magnitude increased and its direction changed.
b. Its magnitude increased but its direction remained the same.
c. Its magnitude remained the same but its direction changed.
d. Its magnitude and its direction both remained the same.
Answer:
d. Its magnitude and its direction both remained the same.
Explanation:
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex] Momentum = mass * velocity [/tex]
The law of conservation of momentum states that the total linear momentum of any closed system would always remain constant with respect to time.
This ultimately implies that, the law of conservation of momentum states that if objects exert forces only on each other, their total momentum is conserved.
In this scenario, a rubber ball moving at a speed of 5 m/s hit a flat wall and returned to the thrower at 5 m/s. Thus, the statement which correctly describes the momentum of the rubber ball is that its magnitude and its direction both remained the same because its velocity didn't change while returning to the thrower.
The correct statement should be "Its magnitude remained the same but its direction changed". Option C is correct.
Given information:
A rubber ball moving at a speed of 5 m/s hit a flat wall and returned to the thrower at 5 m/s.
Now, the mass of the ball doesn't change and the magnitude of the velocity is also the same.
Momentum can be defined as the product of mass and velocity. It is a vector quantity because velocity is also a vector quantity, and it has magnitude and direction.
Now, the magnitude of momentum will be the same because mass and velocity don't change in magnitude.
The direction of velocity will be reversed. So, the direction of momentum will also be reversed.
Therefore, the correct statement should be "Its magnitude remained the same but its direction changed". Option C is correct.
For more details about momentum, refer to the link:
https://brainly.com/question/4956182
Explain the melting of a solid in terms of molecules and energy
Heat generates energy when you melt a solid; as you heat up molecules, they move faster and begin to break apart into a liquid form.
What is the melting point?The melting point is the point at which a substance transforms from a solid to a liquid.
The melting point of a liquid is the temperature at which it transforms from a solid to a liquid at atmospheric pressure. This is the point where the liquid and solid phases are in balance.
Heat generates energy when you melt a solid; as you heat up molecules, they move faster and begin to break apart into a liquid form.
The kinetic energy of the molecule is due to the movement of the molecule as the temperature of the system increases the melting point comes closer.
As the temperature increases the kinetic energy of the molecule increases.
Hence the energy, melting point, and temperature relatively affect each other.
To learn more about the melting point refer to the link;
https://brainly.com/question/12499685
To learn more about the melting refer to the link;
https://brainly.com/question/12499685
For an object falling at the terminal velocity, list all the forces (magnitude and direction) acting it?
Answer:
Three stages of falling
There are three stages as an object falls through a fluid:
at the start, the object accelerates downwards due to the force of gravity
as the object's speed increases, frictional forces such as air resistance or drag increase
at terminal velocity, the weight of the object due to gravity is balanced by the frictional forces, and the resultant force is zero
Explanation:
Explain which components could be used to switch a heater and a light on in a hospital incubator
a switch
ssdgfsddgsgbsssdgfsddgsgbsssdgfsddgsgbs
When drawing a vector, you should represent the magnitude of the vector by the length of the arrow. A. True O B. False
Answer: A. True
Explanation:
Answer:
A. True
Explanation:
A vector in this sense is a thing that has both magnitude (length) and direction.
Say you're walking at a speed of 5 miles per hour. If you keep walking in a straight line, then in two hours you will have walked 10 miles.
This doesn't give any information about where you started or any information about where you ended up after those 2 hours.
This is because "speed" is a scalar. It's a number with no associated geometry. It's just a magnitude. It's the magnitude of velocity.
Velocity is a vector.
2 t of ferrous scrap at a temperature of 20 degrees is heated to the melting point and melted. How much to consume?
Answer
Calculate the amount of heat needed to melt 2.00 kg of iron at its melting point (1809 K), given that: ?Hfus = 13.80
A snowflake falls from a cloud that is 500 m above the ground. It hits the ground after
being pulled down due to the acceleration of gravity (-10 m/s2). How fast will it be
going as it hits the ground?
Answer:
i wabnt the points lol
Explanation:
What is the equation used to find the image distance? Identify each variable
Answer:i f I understand your question correctly, the formula is as follows:
Note: The sign convention is based on distances which are measured from the lens to the object or image of regard. Distances measured in the same direction the light is moving are positive and distances measured in the opposite direction the light is moving are negative.
The measurements are in meters
The “ambient” index of refraction is assumed to be n=1.00
The inverse of the object distance plus the dioptric power of the lens (convex—positive and concave—negative) equals the inverse of the image distance.
Or 1/Od +Dl =1/Id
Please note, it has been a long time since I thought about teaching this concept to students.
Hope this helps have a awesome day/night❤️✨Explanation:
In terms of activation energy, why does increasing the temperature of a reaction make it proceed more quickly? A. Increasing the temperature increases how many reactant molecules reach activation energy. B. Increasing the temperature reduces the activation energy C. Increasing the temperature increases the potential energy of the reactants D. Increasing the temperature makes the molecules move slower.
Answer:
A. Increasing the temperature increases how many reactant molecules reach activation energy.
Explanation:
The correct statement is " Increasing the temperature increases how many reactant molecules reach activation energy"
What is activation energy?"Activation energy is the minimum amount of energy that must be provided to molecules /atoms of the compounds/ elements to result in a chemical reaction."
When temperature increases the kinetic energy of the molecules increases hence more reactant molecules reach the activation energy.
So it can be concluded that by Increasing the temperature increases how many reactant molecules reach activation energy.
Know more on activation energy here
https://brainly.com/question/11334504
#SPJ2.
We use the system to determine noise level
Newtonian
Cartesian
Decibel
Fujita Scale
Answer:
Decibel is used to determine noise level.
Another example of an object that has pressure energy
Answer:
A balloon?
Explanation:
it inflates because of the air pressure inside
True or false? If two components are connected in series, the current through one component will
always be the same as the current through the other.
the answer is ( True ) .
the current is the same in series circuits .
Train A leaves the station heading north at 80 mph. At the same time and from the same station, Train B heads south 65 mph. How far apart are the trains after 3 hours fo travel?
Answer:
The trains will be 435 miles apart
Explanation:
Distance covered by the two trains can be obtained by multiplying their speeds with the time frame under consideration - in this our case, it is 3hours.
For Train A
Distance covered = 80mph X 3 hours = 240miles
For train B
Distance covered = 65mph X 3 hours = 195 miles.
The total distance between the two trains after 3 hours will be
240 + 195 = 435 miles
Marcus found that the weight of a rock on Earth is 22.5 newtons. He knows that the gravity on Saturn is 0.93 times the gravity on Earth. What would the weight of this rock be on Saturn?
Answer:
The weight of the rock on Saturn would be 21.375
Explanation:
Since the weight on Saturn is 0.93 times the weight on Earth you would multiply 22.5 x0.93. This bring you too 21.375One day, Pinki was ironing the clothes in her room. After half an hour of ironing, the light went off and Pinki went outside to the lobby of her house to check it there was any problem in the household circuit. At the same time, she listened the voice of her 4 years old daughter from the same room where she was ironing the clothes. Her daughter was about to touch the hot electric iron but at the same moment, Pinki entered in the room and pushed her daughter back from that place.
(a) On which effect of electric current, does the electric iron works?
(b)State the effect of electric current described here.
(c) Mention the values showed by Pinki here.
PLEASE ANSWER ASAP
Answer:
(a) An electric iron works on the heating effect of electric current
(b) The heating effect of an electric current is the tendency for electric current to cause the temperature of the material through which it is flowing to rise due to the resistance of the material
The heating effect, 'E', is given by the formula, E = I²·R·t
Where;
I = The current flowing
R = The resistance of the material
t = The time the material takes to heat up
(c) The values showed by Pinki here is the value of care, concern and prevention, to prevent the harmful effect of the high heat on the skin of her daughter
Explanation:
If a car used 250,000 W of power to complete a race in 12 s, how much work did the car do?
Answer:
3,000,000 Joules!
Explanation:
power=work/t
250000=work/12
work=3,000,000 Joules
how much hp does that fastest car in the world have
Answer:
Hennessey Venom F5. Power: 1600+ bhp. Price: $1.6 million.
Koenigsegg Regera. Power: 1500 bhp.
Bugatti Chiron. Power: 1479 bhp.
NIO EP9. Power: 1341 bhp. Price: $1.48 million.
PLEASE HELP AM I CORRECT??!!
A van of mass 2500kg travelling at a velocity of 12 m/s collides with a stationary car of mass 700kg. The vehicles move together after the impact. Calculate their velocity.
Answer: 9.375m/s
Explanation: This is an inelastic collision, so the formula is mv1+mv2=(m1+m2)v-final. My work is a follows:
2500kg(12m/s) + 700kg(0m/s)=(2500kg+700kg)(v-final)
30,000kg(m/s)+0=3200kg(v-final)
30,000kg(m/s)/3200kg=9.375m/s
Are acceleration and mass proportional or inversely proportional values?
Answer:
acceleration and mass are inversely proportional values
Explanation:
The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.