The first and second coils have the same length, and the third and fourth coils have the same length. They differ only in the cross-sectional area. According to theory, what should be the ratio of the resistance of the second coil to the first coil and the fourth coil to the third

Answer:

the answer is c which is a+2 charge

Explanation:

Beryllium is in group 2A. It's nearest noble gas is Helium, which is 2 elements behind Beryllium. ThBeryllium wants to lose two electrons. When it does that, Beryllium will have a positive chargeof two, and it will be stated as B-e two plus.

The Beryllium (Be) has an atomic number of 4 and belongs to Group-2 elements. The Beryllium will form a divalent cation (+2). Thus, option C is correct.

In an atom, the number of electrons equals the number of protons. If the electrons are removed from the atom or the electrons are added to the atom, the atom has an excessive positive or negative charge.

This excessive of electrons or lack of electrons forms Ions. The excess of electrons has a negative charge or anions and the lack of electrons has a positive charge or cations.

Beryllium has 4 electrons. Two electrons are occupied in the valence shell of beryllium. Group 2 elements always form the positive ions or cations, to become stable ions.

The outermost shell of beryllium has two electrons. In order to form a stable ion, beryllium should lose its two electrons or gain six electrons. Beryllium belongs to the Group-2 element, it always loses two electrons and forms Be²⁺, to form a stable ion.

Hence, Beryllium forms an ion with a +2 charge. Thus, the correct option is C.

To learn more about the Cations and Anions:

https://brainly.com/question/980691

#SPJ5

Answer:

S = 1/2 gt² = 1/2 × 9.8 × 3² = 4.9×9 = 44.1 m

Explanation:

Answer:

if we want to find force by using newton's law equation ( f = ma ) we have to use mass and acceleration not velocity ,but in this question they did not mention about acceleration but speed so the answer is D

Answer:

I dnt know that language

Explanation:

Answer:

effort arm mean the use of any work by using your hand force motion or by hand power

Answer:

After 15 seconds, the green car will catch up with the blue car

Explanation:

Let the time for the green car to catch up with the blue car be T

When the green car catches up to the blue car, the distances covered by each car after time T will be equal. Also, their velocities at that instant will be equal

Distance covered by blue car after time T is given by: s = ut + 0.5 at²

Where u = 0, a = 0.2 m/s², t = T

S = 0.5 × 0.2 × T² = 0.1 T²

Velocity of blue car, v = u+ at

v = 0.2T

Distance covered by green car at T is given as: S = Velocity × time

Where v = 0.2T, t = T - 7.5 (since the blue car started 7.5 seconds earlier)

S = 0.2T (T - 7.5)

S = 0.2 T² - 1.5T

Equating the distance covered by the two cars

0.2T² - 1.5T = 0.1T²

0.1T² - 1.5T = 0

T(0.1T - 1.5) = 0

T = 0 or

T = 1.5/0.1 = 15 secs

Therefore, after 15 seconds, the green car will catch up with the blue car

Answer:

d. correctly described by all the statements above.

Explanation:

Kinetic molecular theory of gases states that gas particles exhibit a perfectly elastic collision and are constantly in motion.

According to the kinetic-molecular theory, the average kinetic energy of gas particles depends on temperature.

This ultimately implies that, the average kinetic energy of gas particles is directly proportional to the absolute temperature of an ideal gas. Thus, an increase in the average kinetic energy of gas particles would cause an increase in the absolute temperature of an ideal gas.

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object. It is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Generally, the temperature of a quantity of an ideal gas is;

a. a measure of the ability of an ideal gas to transfer thermal energy to another body.

b. the average kinetic energy of gas particles is directly proportional to the absolute temperature of an ideal gas

c. proportional to the internal energy of the gas.

Answer:

the correct answer is C   v = 60 cm / s

Explanation:

The speed of a wave is related to the frequency and the wavelength

         v = λ f

They indicate that the object performs 20 oscillations every second, this is the frequency

         f = 20 Hz

the wavelength is the distance until the wave repeats, the distance between two consecutive peaks corresponds to the wavelength

         λ = 3 cm = 0.03 m

let's calculate

       v = 20 0.03

       v = 0.6 m / s

       v = 60 cm / s

the correct answer is C

Answer:

(a)Magnitude=28.81 m/s

Direction=33.3 degree below the horizontal

(b) No, it is not perfectly elastic collision

Explanation:

We are given that

Mass of stone, M=0.150 kg

Mass of bullet, m=9.50 g=[tex]9.50\times 10^{3} kg[/tex]

Initial speed of bullet, u=380 m/s

Initial speed of stone, U=0

Final speed of bullet, v=250m/s

a. We have to find the magnitude and direction of the velocity of the stone after it is struck.

Using conservation of momentum

[tex]mu+ MU=mv+ MV[/tex]

Substitute the values

[tex]9.5\times 10^{-3}\times 380 i+0.150(0)=9.5\times 10^{-3} (250)j+0.150V[/tex]

[tex]3.61i=2.375j+0.150V[/tex]

[tex]3.61 i-2.375j=0.150V[/tex]

[tex]V=\frac{1}{0.150}(3.61 i-2.375j)[/tex]

[tex]V=24.07i-15.83j[/tex]

Magnitude of velocity of stone

=[tex]\sqrt{(24.07)^2+(-15.83)^2}[/tex]

|V|=28.81 m/s

Hence, the magnitude and direction of the velocity of the stone after it is struck, |V|=28.81 m/s

Direction

[tex]\theta=tan^{-1}(\frac{y}{x})[/tex]

=[tex]tan^{-1}(\frac{-15.83}{24.07})[/tex]

[tex]\theta=tan^{-1}(-0.657)[/tex]

=33.3 degree below the horizontal

(b)

Initial kinetic energy

[tex]K_i=\frac{1}{2}mu^2+0=\frac{1}{2}(9.5\times 10^{-3})(380)^2[/tex]

[tex]K_i=685.9 J[/tex]

Final kinetic energy

[tex]K_f=\frac{1}{2}mv^2+\frac{1}{2}MV^2[/tex]

=[tex]\frac{1}{2}(9.5\times 10^{-3})(250)^2+\frac{1}{2}(0.150)(28.81)^2[/tex]

[tex]K_f=359.12 J[/tex]

Initial kinetic energy is not equal to final kinetic energy. Hence, the collision is not perfectly elastic collision.

Explanation:

Given that,

The radius of rain drop, r = 0.12 cm = 0.0012 m

The viscocity of air is, [tex]\eta=18\times 10^{-5}\ poise[/tex]

Let the viscous force is, [tex]F = 0.010173\ N[/tex]

The viscous force is given by :

[tex]F=6\pi \eta rv\\\\v=\dfrac{F}{6\pi \eta r}[/tex]

Put all the values,

[tex]v=\dfrac{0.010173}{6\pi 18\times 10^{-5}\times 0.0012 }\\\\v=2498.58\ m/s[/tex]

Answer:

13 behind o2

Explanation:

answer is in photo above

Answer:

12

Explanation:

Answer:

Ohm's law is not applicable to semi-conductors and insulators.

Explanation:

Is this what you want?

Answer:

a = ?

u = 0

v = 30

by using v = u + at equation we can find " a "

30 = 0 + 5a

6 m/s = a

by using f = ma equation we can find force produce by engine ,

f = ?

a = 6

m = 1200

f = 1200 × 6

f = 7200 N

so the answer is "B"

Answer:

First of all the formula is F= uR,( force= static friction× reaction)

mass= 5+25=30

F= 50

R= mg(30×10)=300

u= ?

F=UR

u= F/R

u= 50/300=0.17N

Answer:

Explanation:

Distance=10km

Time=30min=0.5hr

So,speed=10/0.5

So,speed=20km/hr

(a) standard deviation = σ = 4.9996

(b) variance = σ² = 24.996

Given frequency table (find attached as Table 1);

(a) To find the sample standard deviation and sample variance, follow these steps;

i. Calculate the mid-point c for each group by using the mid-point formula;

c = (lower bound + upper bound) / 2

=> c = (6.51 + 8.50) / 2 = 7.505

=> c = (8.51 + 10.50) / 2 = 9.505

=> c = (10.51 + 12.50) / 2 = 11.505

=> c = (12.51 + 14.50) / 2 = 13.505

=> c = (14.51 + 16.50) / 2 = 15.505

So the new table becomes (find attached as Table 2);

ii. Calculate the total number of samples (n) which is the sum of all the frequencies.

n = 50+18+42+20+46

n = 176

iii. Calculate the mean (M)

This is done by first multiplying the midpoints by the corresponding frequencies and then dividing the result by the total number of samples (n).

M = [(7.505 x 50) + (9.505 x 18) + (11.505 x 42) + (13.505 x 20) + (15.505 x 46)] / 176

M = [375.25 + 171.09 + 483.21 + 270.1 + 713.23] / 176

M = [2012.88] / 176

M = 11.44

iv. Find the variance (σ²);

The variance is calculated using the following formula

σ² = [Σ(f x c²) - (n x M²)] / (n - 1)                ------------(i)

Where;

f = frequency of each boundary data point

=>  Let's first calculate Σ(f x c²).

This is done by finding the sum of the product of the frequency (f) of each boundary point and the square of their corresponding mid-points(c)

Σ(f x c²) = [(50 x 7.505²) + (18 x 9.505²) + (42 x 11.505²) + (20 x 13.505²) + (46 x 15.505²)]

Σ(f x c²) = [(2816.25125) + (1626.21045) + (5559.33105) + (3647.7005) + (11058.63115)]

Σ(f x c²) = 24708.1244

=> Now calculate (n x M²)

n x M² = 176 x 11.44²

n x M² = 23033.7536

=> Now substitute these values into equation (i) to calculate the variance

σ² = [Σ(f x c²) - (n x M²)] / (n - 1)

σ² = [24708.1244 - 23033.7536] / (176 - 1)

σ² = [4374.3708] / (175)

σ² = 24.996

Therefore, the variance is 24.996

v. Find the standard deviation (σ)

The standard deviation is the square root of the variance. i.e

σ = √σ²

σ = √24.996

σ = 4.9996

Therefore, the standard deviation is 4.9996

OUM I THINK IS WIND

CORRECT ME IF IM WRONG

Answer:

E = 2.01 J

Explanation:

The energy lost by the car due to friction through the entire trip must be equal to the potential energy of the car at the starting point.

Energy Lost = E = Potential Energy

E = mgh

where,

m = mass of car = 150 g = 0.15 kg

g = acceleration due to gravity = 9.81 m/s²

h = height of the track = 137 cm = 1.37 m

Therefore,

E = (0.15 kg)(9.81 m/s²)(1.37 m)

E = 2.01 J

Answer:

A wave model of light is useful for explaining brightness,color, and the frequency-dependent bending of light at a surface between media. However, because light can travel through space, it cannot be a matter wave, like sound or water waves.

Answer:

9.6352× 10²⁰ C atoms

Explanation:

From the given information,

The molar mass of Carbon = 12 g/mol

number of moles = 0.020g/ 12 g/mol

number of moles = 0.0016 mol

If 1 mole of C = 6.022 × 10²³ C atoms

∴

0.0016 mol of C = (6.022 × 10²³ C atoms/ 1 mol of C)×0.0016 mol of C

= 9.6352× 10²⁰ C atoms

Hence, the number of carbon atoms present in 0.020 g of carbon = 9.6352× 10²⁰ C atoms

Answer:

The second statement.

Complete question is;

Use a variation model to solve for the unknown value.

The stopping distance of a car is directly proportional to the square of the speed of the car.

a. If a car traveling 50 mph has a stopping distance of 170 ft, find the stopping distance of a car that is traveling 70 mph.

b. If it takes 244.8 ft for a car to stop, how fast was it traveling before the brakes were applied?

Answer:

A) d = 333.2 ft

B) 60 mph

Explanation:

Let the stopping distance be d

Let the speed of the car be v

We are told that the stopping distance is directly proportional to the square of the speed of the car. Thus;

d ∝ v²

Therefore, d = kv²

Where k is constant of variation.

A) Speed is 50 mph and stopping distance of 170 ft.

v = 50 mph

d = 170 ft = 0.032197 miles

Thus,from d = kv², we have;

0.032197 = k(50²)

0.032197 = 2500k

k = 0.032197/2500

k = 0.0000128788

If the car is now travelling at 70 mph, then;

d = 0.0000128788 × 70²

d = 0.06310612 miles

Converting to ft gives;

d = 333.2 ft

B) stopping distance is now 244.8 ft

Converting to miles = 0.046363636 miles

Thus from d = kv², we have;

0.046363636 = 0.0000128788(v²)

v² = 0.046363636/0.0000128788

v² = 3599.99658

v = √3599.99658

v ≈ 60 mph

Answer:

Time, t = 8 seconds.

Explanation:

Given the following data;

Initial velocity = 24 m/s

Final velocity = 0 m/s (since the object is coming to a stop).

Acceleration = -4 m/s²

To find how long it will take the object to stop, we would use the first equation of motion;

[tex] V = U + at[/tex]

Where;

Making time, t the subject of formula, we have;

[tex] t = \frac{V - U}{a}[/tex]

Substituting into the equation, we have;

[tex] t = \frac{0 - 24}{-4}[/tex]

[tex] t = \frac{-24}{-4}[/tex]

Time, t = 8 seconds.

Answer:

13.2

Explanation:

I would say this cause this is a reasonable answer

The length of cotton is wound closely around a pen, it goes around six times. The distance once around the pen is 13.2 cm. The correct option is c.

Distance is the sum of an object's movements, regardless of direction. The distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.

Measuring units are units that are used to measure the magnitude, amount, or quantity of any object. There are 7 basic measuring units that are used in worldwide and everyday life.

Given, the piece of cotton is tied around the pen, it goes around six times around the pen. The diameter of the pen will the length of the cotton. The actual length can be for six rounds is 13.2 cm.

Therefore, the correct option is с. 13.2 cm.

To learn more about length, refer to the link:

https://brainly.com/question/16188698

#SPJ2

Solution :

 Given :

Angle q = angle between the thread supporting the ball with the vertical.

Let mass [tex]$m_1 >>>m_2$[/tex].

Then [tex]$m_1+m_2=m_1$[/tex]

In this case, acceleration can be found out by applying Newton's law of motion.

Thus,

Acceleration, [tex]$a=\frac{m_1}{m_1+m_2}. g$[/tex]

                      [tex]$a=\frac{m_1}{m_1}. g$[/tex]

                       [tex]$a=g$[/tex]

Therefore, [tex]$\tan \theta =\frac{a}{g}$[/tex]

or                [tex]$\tan \theta =\frac{a}{a}$[/tex]

or                [tex]$\tan \theta =1$[/tex]

                   [tex]$\theta = \tan ^{-1}(1)$[/tex]

                   [tex]$\theta = 45^\circ$[/tex]

Therefore the largest angle q is  [tex]$\theta = 45^\circ$[/tex]

Answer:

3 ohm

Explanation:

Given :

V=9V

And according to given question same current is flowing in both resistance that means resistance will connected in series

So,

R= R+R=2R

Now,

Applying ohm's law

[tex]V=IR\\9=1.5*2R\\9=3R\\R=\frac{9}{3} \\R= 3ohm[/tex]

Therefore, answer is 3 ohm