The following precedence network is used for assembling a product. You have been asked to achieve an output of 240 units per eight-hour day. All times in this network are in minutes. Balance the line using the following rule: assign tasks to workstations on the basis of most following tasks (Rule 1). Use greatest positional weight (Rule 2) as a tiebreaker. How many tasks were assigned to workstation 3?

If ∥v∥ = ∥w∥, then v⋅w = 0 and v⋅(v−w) = 0, showing that v⋅w and v−w are orthogonal.

Given vectors v and w in R^n, if their norms are equal (∥v∥ = ∥w∥), we can demonstrate that v⋅w and v⋅(v−w) are both equal to zero, indicating that v−w and v⋅w are orthogonal.

To prove this, we start with the dot product v⋅w. Using the properties of the dot product, we have v⋅w = ∥v∥ ∥w∥ cosθ, where θ is the angle between v and w. Since ∥v∥ = ∥w∥, the expression simplifies to v⋅w = ∥v∥^2 cosθ. If ∥v∥ = ∥w∥, it implies that ∥v∥^2 = ∥w∥^2, and thus, cosθ = 1.

As cosθ = 1, the dot product v⋅w becomes v⋅w = ∥v∥^2, which is equal to zero. Therefore, v⋅w = 0, indicating that v and w are orthogonal.

Next, we consider the dot product v⋅(v−w). Expanding this expression, we have v⋅(v−w) = v⋅v − v⋅w. Since v⋅w is zero (as shown earlier), the dot product simplifies to v⋅(v−w) = v⋅v = ∥v∥^2, which is again zero when ∥v∥ = ∥w∥.

Hence, we have demonstrated that v⋅w = 0 and v⋅(v−w) = 0 when ∥v∥ = ∥w∥, confirming that v−w and v⋅w are orthogonal.

Learn more about orthogonality

brainly.com/question/32196772

#SPJ11

For vectors v and w with equal magnitudes, v w and v - w are orthogonal because the dot product equals zero, as proved step by step using properties of dot products and magnitudes.

In the field of linear algebra, the given question aims to prove that if for vectors v and w if the magnitudes are equal i.e. ∥v∥ = ∥w∥, then the vectors v w and v − w are orthogonal.

We'll prove this by showing that their dot product equals zero. For two vectors to be orthogonal, the dot product must be zero.

Hence, we have now proved that v w and v − w are indeed orthogonal.

https://brainly.com/question/31971350

#SPJ12

Answer:

y=(-1/2)x+6

Step-by-step explanation:

Start by calculating the slope. Slope = rise/run.

In the equation y=mx+b, m is the slope. This is slope intercept form.

The formula is (y2-y1)/(x2-x1).

Pick 2 points from the graph. Let's use (0,6) and (4,4).

slope = m= (6-4)/(0-4)

slope = m = 2/-4 = -1/2

[This negative slope makes sense because this graph is decreasing - - - as x increases, y decreases.]

The graph shows us the y intercept is 6.

So the equation is y=(-1/2)x+6.

If the derivative is positive, the particle is moving upward, and if it is negative, the particle is moving downward.

Without knowing the specific path of the particle, we cannot find the time t when the line tangent to the path of the particle is vertical. However, we can determine the direction of motion of the particle at that moment.

If the tangent line to the path of the particle is vertical, it means that the slope of the tangent line is undefined (since the denominator of the slope formula, which is the change in x, is zero). This implies that the particle is moving in a vertical direction, either upward or downward.

To determine the direction of motion, we need to look at the sign of the derivative of the particle's position function with respect to time. If the derivative is positive, it means the particle is moving upward, and if the derivative is negative, it means the particle is moving downward.

For example, if the particle's position function is given by y = f(t), then the derivative of this function with respect to time t gives the velocity of the particle, which tells us whether the particle is moving upward or downward. If the velocity is positive, the particle is moving upward, and if it is negative, the particle is moving downward.

So, to determine the direction of motion of the particle at the moment when the tangent line is vertical, we need to evaluate the sign of the derivative at that moment. If the derivative is positive, the particle is moving upward, and if it is negative, the particle is moving downward.

Learn more about downward here

https://brainly.com/question/28338671

#SPJ11

To determine if the sequence converges or diverges, we can use the limit test. We'll analyze the limit of the given function as n approaches infinity:

an = (ln n)^5 / √n

We'll find the limit as n approaches infinity:

lim (n→∞) [(ln n)^5 / √n]

To evaluate this limit, we can apply L'Hopital's Rule, which states that if the limit of the ratio of the derivatives of the numerator and denominator exists, then the limit of the ratio of the functions exists and is equal to the limit of the ratio of the derivatives.

First, let's rewrite the expression as:

an = (ln n)^5 * n^(-1/2)

Now, let's find the derivatives of (ln n)^5 and n^(-1/2) with respect to n:

d/dn (ln n)^5 = 5(ln n)^4 * (1/n)
d/dn n^(-1/2) = (-1/2)n^(-3/2)

Now, let's find the limit of the ratio of the derivatives:

lim (n→∞) [(5(ln n)^4 * (1/n)) / (-1/2)n^(-3/2)]

We can simplify this expression:

lim (n→∞) [(10(ln n)^4) / n^(1/2)]

Now, we observe that as n approaches infinity, the denominator (n^(1/2)) grows much faster than the numerator (10(ln n)^4). Therefore, the limit of the expression goes to zero:

lim (n→∞) [(10(ln n)^4) / n^(1/2)] = 0

Since the limit is zero, the sequence converges to 0.

To know more about sequence, visit:

https://brainly.com/question/30262438

#SPJ11

The Lyapunov function V(x, y) = x^2 + (1/4)y^2 is a valid choice, demonstrating that the origin is asymptotically stable for the given system of differential equations.

To show that the origin is asymptotically stable, we need to find a Lyapunov function V(x, y) that satisfies two conditions: V(0,0) = 0 and V(x, y) > 0 for all (x, y) ≠ (0,0).

Considering V(x, y) = ax^2 + cy^2, we differentiate it with respect to time:

dV/dt = (∂V/∂x) * (dx/dt) + (∂V/∂y) * (dy/dt)

      = (2ax) * (-x^3xy^2) + (2cy) * (-2x^2y - y^3)

      = -2ax^4y^3 - 4cxy^4 - 2cy^4.

We want dV/dt to be negative definite, which means it is negative for all (x, y) ≠ (0,0). To achieve this, we can set a = 1 and c = 1/4. Then, dV/dt simplifies to:

dV/dt = -2x^4y^3 - y^4(4x + 2)

      = -y^4(2x^4 + 2x + 1).

Since y^4 is always positive, for dV/dt to be negative definite, we need 2x^4 + 2x + 1 > 0 for all (x, y) ≠ (0,0). This condition is satisfied since the polynomial 2x^4 + 2x + 1 is strictly positive for all x.

Therefore, the Lyapunov function V(x, y) = x^2 + (1/4)y^2 is a valid choice, demonstrating that the origin is asymptotically stable for the given system of differential equations.

Learn more about differential equations here:

https://brainly.com/question/2273154

#SPJ11

This gives us the equation -2x + y = 0 and 4x - 3y = 0, which has the solution x = y/2. Therefore, the eigenvector for λ = 3 is v2 = [1; 2].

a) To find matrix A with eigenvalues 1 and 4 and corresponding eigenvectors v1 and v2 respectively, we can use the formula A = PDP^-1 where P is the matrix of eigenvectors and D is the diagonal matrix of eigenvalues.

We know that v1 and v2 are eigenvectors with eigenvalues 1 and 4 respectively, so we can set up the following equations:

Av1 = 1v1 and Av2 = 4v2

Multiplying both sides of each equation by P^-1, we get:

PDv1 = v1 and PDv2 = 4v2

Therefore, P = [v1 v2] and D = [1 0; 0 4], which gives us the matrix A = PDP^-1.

b) To find matrix B with eigenvalues 1 and 3, we can use the same formula A = PDP^-1. However, we don't know the eigenvectors yet. To find them, we can use the characteristic polynomial of B, which is (1-λ)(3-λ) = 0. This gives us eigenvalues λ = 1 and λ = 3.

To find the eigenvectors for λ = 1, we need to solve the equation (B-λI)v = 0, which gives us:

(B-1I)v = 0
[0 1; 1 2][x; y] = [0; 0]

This gives us the equation x + y = 0, so the eigenvector for λ = 1 is v1 = [1; -1].

To find the eigenvectors for λ = 3, we need to solve the equation (B-λI)v = 0, which gives us:

(B-3I)v = 0
[-2 1; 4 -3][x; y] = [0; 0]


Using these eigenvectors and the formula A = PDP^-1, we can find the matrix B = PDP^-1 where P = [v1 v2] and D = [1 0; 0 3].

To learn more about : eigenvector

https://brainly.com/question/17079851

#SPJ11

the arc length of the shot put ring, with a diameter of 40 meters and a central angle measure of 35 degrees, is approximately 12.2 meters.

To find the arc length of a shot put ring, we can use the formula:

Arc length = (Central angle / 360 degrees) * Circumference

Given that the shot put ring has a diameter of 40 meters, we can calculate the circumference using the formula:

Circumference = π * Diameter

Circumference = π * 40 meters

Circumference ≈ 3.14 * 40 meters

Circumference ≈ 125.6 meters

Now, substituting the values into the arc length formula:

Arc length = (35 degrees / 360 degrees) * 125.6 meters

Arc length ≈ (0.0972) * 125.6 meters

Arc length ≈ 12.2 meters

To know more about arc visit:

brainly.com/question/31612770

#SPJ11

The solution of the equation equation x = - 3y + 1 and x = 4y + 15 will be (7, -2).

Given that:

Equation 1: x = - 3y + 1

Equation 2: x = 4y + 15

In other words, the collection of all feasible values for the parameters that satisfy the specified mathematical equation is the convenient storage of the bunch of equations.

From equations 1 and 2, then we have

4y + 15 = - 3y + 1

7y = - 14

y = -2

The value of 'x' is calculated as,

x = -3 (-2) + 1

x = 6 + 1

x = 7

More about the solution of the equation link is given below.

https://brainly.com/question/22613204

#SPJ1

The similarity dimension of the subset of [0,1]  is 0.9542

We can approach this problem by using the concept of similarity dimension, which relates the scaling factor of a set to its Hausdorff dimension. Let A be the subset of [0,1] consisting of real numbers that can be written without the digit 8 appearing anywhere in their decimal expansion. We want to find the similarity dimension of A.

Note that A is a self-similar set, since it can be partitioned into 9 subsets that are scaled copies of A itself. Specifically, for each digit d ≠ 8, we can define Ad to be the subset of A consisting of real numbers whose first decimal digit is d, and then we have A = A0 ∪ A1 ∪ ... ∪ A9, where each Ad is a scaled copy of A.

Furthermore, the scaling factor for each Ad is [tex]\frac{1}{10}[/tex], since removing the first decimal digit corresponds to dividing the number by 10. Therefore, we can apply the formula for similarity dimension:

[tex]D = \frac{log (N)}{log (\frac{1}{s}) }[/tex]

where N is the number of scaled copies of A that are needed to cover A, and s is the scaling factor.

In this case, we have N = 9 (since there are 9 digits other than 8), and [tex]s = \frac{1}{10}[/tex]. Therefore, the similarity dimension of A is:

[tex]D = \frac{log (N)}{log (\frac{1}{s}) } = \frac{log(9)}{l0g(10)} = 0.9542[/tex]

So the similarity dimension of the subset of [0,1] consisting of real numbers that can be written without the digit 8 appearing anywhere in their decimal expansion is approximately 0.9542.

To know more about "Scaling factor" refer here:

https://brainly.com/question/30314658#

#SPJ11

Answer: sort

Step-by-step explanation: it’s not conditional formatting that’s a highlighting words type of thing and it’s not format painterc that’s a font application thingy .

If you wanted to arrange a list of word alphabetical , you would use the "sort" function.

This can usually be found under the "Data" tab in programs like Microsoft Excel. Neither "conditional formatting" nor "format painter" would be the appropriate tool for this task.

Conditional formatting is used to format cells based on certain criteria, and format painter is used to copy and apply formatting from one cell to another.

To Know more about  alphabetical  refer here

https://brainly.com/question/20261759#

#SPJ11

The moment generating function, M(t), of Y=X1X2X3 is M(t)= e⁰(0t)P(Y=0) + e¹(t)P(Y=1) = 1(19/27) + e¹(t)(8/27).

The reason why P(Y=1) is not (1/3)^3 is because Y=X1X2X3 takes on only values 0 and 1. Therefore, in order for Y to equal 1, all of X1, X2, and X3 must be equal to 1. The probability of this occurring is the probability of X1, X2, and X3 all being 1, which is (2/3)³. This is because P(X=1)=1/3, which means that P(X≠1)=2/3.

Since the events of X1, X2, and X3 are independent, the probability of all three being 1 is the product of their individual probabilities, which is (2/3)³. Thus, P(Y=1)=(2/3)³=8/27. On the other hand, the probability of Y=0 is 1-P(Y=1), which is 1-8/27=19/27.

You can learn more about function at: brainly.com/question/12431044

#SPJ11

It's A

An independent event means that the probability of events A and B occurring is equal to event A's probability multiplied by event B.

An orthonormal basis for the subspace spanned by 1, x, and x^2 is {1/√2, x/√(2/3), (x^2 - (1/3)/√2)/√(8/45)}.

We can use the Gram-Schmidt process to find an orthonormal basis for the subspace spanned by 1, x, and x^2.

First, we normalize 1 to obtain the first basis vector:

v1(x) = 1/√2

Next, we subtract the projection of x onto v1 to obtain a vector orthogonal to v1:

v2(x) = x - <x, v1>v1(x)

where <x, v1> = 1/√2 ∫_{-1}^1 x dx = 0. So,

v2(x) = x

To obtain a unit vector, we normalize v2:

v2(x) = x/√(2/3)

Finally, we subtract the projections of x^2 onto v1 and v2 to obtain a vector orthogonal to both:

v3(x) = x^2 - <x^2, v1>v1(x) - <x^2, v2>v2(x)

where <x^2, v1> = 1/√2 ∫_{-1}^1 x^2 dx = 1/3 and <x^2, v2> = √(2/3) ∫_{-1}^1 x^3 dx = 0. So,

v3(x) = x^2 - (1/3)v1(x) = x^2 - (1/3)/√2

To obtain a unit vector, we normalize v3:

v3(x) = (x^2 - (1/3)/√2)/√(8/45)

Know more about Gram-Schmidt process here:

https://brainly.com/question/30761089

#SPJ11

If $U$ is the subspace of $M_n(\mathbb{R})$ consisting of all upper triangular matrices, then any matrix $A\in U$ can be written as $A=T+N$, where $T$ is the diagonal part of $A$ and $N$ is the strictly upper triangular part of $A$ (i.e., the entries above the diagonal).

Note that $N$ is nilpotent (i.e., $N^k=0$ for some $k\in\mathbb{N}$), so any polynomial in $N$ must be zero. Therefore, the characteristic polynomial of $A$ is the same as that of $T$.

\ Since $T$ is diagonal, its eigenvalues are just its diagonal entries, so the characteristic polynomial of $T$ is $\det(\lambda I-T)=(\lambda-t_1)(\lambda-t_2)\cdots(\lambda-t_n)$, where $t_1,t_2,\ldots,t_n$ are the diagonal entries of $T$. Thus, the eigenvalues of $A$ are $t_1,t_2,\ldots,t_n$, so $U$ is diagonalizable.

If $D$ is the subspace of $M_n(\mathbb{R})$ consisting of all diagonal matrices, then any matrix $A\in D$ is already diagonal, so its eigenvalues are just its diagonal entries. Therefore, $D$ is already diagonalizable.

Learn more about subspace  here:

https://brainly.com/question/26727539

#SPJ11

Science club membership and recycling habits is 0.511.

Science club membership independent from recycling habits is 0.486.

P(A and B) is not equal to P(A) x P(B), we can conclude that science club membership is dependent on recycling habits in this sample.

Independence between two variables, we compare their joint probability to the product of their individual probabilities.

If the joint probability equals the product of the individual probabilities, then the variables are independent, but if they are not equal, then the variables are dependent.

P(A) x P(B) = 0.54 x 0.90 = 0.486.

Let A be the event that a student is a member of the science club and B be the event that a student recycles on a regular basis.

Given that 90% of the students in the sample recycle on a regular basis, we can say that P(B) = 0.90.

Also, given that 54% of the students in the sample were members of the science club and 94.4% of those students recycle on a regular basis, we can say that P(A and B) = 0.54 x 0.944

= 0.511.

If A and B are independent, then P(A and B) = P(A) x P(B).

But, in this case, we have:

P(A) = 0.54

P(B) = 0.90

P(A and B) = 0.511

P(A) x P(B) = 0.54 x 0.90 = 0.486.

The science club are more likely to recycle on a regular basis than those who are not members of the science club.

For similar questions on Science Club

https://brainly.com/question/24945227

#SPJ11

The critical value for this test is 2.485, rounded to two decimal places.

To find the critical value for a right-tailed t-test with a sample size of 27 and α=0.01, we need to use a t-distribution table or calculator.

The degrees of freedom (df) for this test is n-1 = 27-1 = 26.

Using a t-distribution table or calculator with 26 degrees of freedom and a right-tailed test with α=0.01, we can find the critical value.

The critical value for a right-tailed t-test with α=0.01 and 26 degrees of freedom is approximately 2.485.

Therefore, the critical value for a right-tailed t-test with a sample size of 27 and α = 0.01 is 2.485 (rounded to two decimal places).

Learn more about right-tailed t-test

brainly.com/question/15240855

#SPJ11

The equation for the conic that satisfies the given conditions. parabola, focus (4, −4), vertex (4, 3) is [tex]y = -1/28(x - 4)^2 + 3.[/tex].

Since the focus is above the vertex, we know that this parabola opens downward.

The standard form of the equation of a parabola that opens downward with the vertex at (h, k) and the focus at (h, k - p) is:

[tex](y - k) = -1/(4p)(x - h)^2[/tex]

where p is the distance from the vertex to the focus.

In this case, the vertex is at (4, 3) and the focus is at (4, -4). Therefore, p = 7.

Substituting these values into the standard form equation, we get:

[tex](y - 3) = -1/(4*7)(x - 4)^2[/tex]

Simplifying and rearranging, we get:

[tex]y = -1/28(x - 4)^2 + 3[/tex]

So the equation of the parabola is [tex]y = -1/28(x - 4)^2 + 3.[/tex]

Know more about parabola here:

https://brainly.com/question/64712

#SPJ11

Let x be the number of cows on the farm and y be the number of chickens. From the given information, we can come up with two equations: 1. x + y = 26 (because there are a total of 26 animals on the farm) 2. 4x + 2y = 84 (because each cow has 4 legs and each chicken has 2 legs)Now, we need to solve this system of equations for x and y. We can do this by using the substitution method or the elimination method. I'll use the elimination method: Multiplying equation 1 by 2, we get: 2x + 2y = 52 Subtracting equation 2 from this, we get: 2x + 2y - 4x - 2y = 52 - 84 Simplifying: -2x = -32 Dividing both sides by -2: x = 16 Now, substituting x = 16 in equation 1, we get: 16 + y = 26 Solving for y: y = 10Therefore, there are 16 cows and 10 chickens on the farm.

Let us begin the problem by letting c be the number of cows and h be the number of chickens in Joe's farm. There are 20 cows and 6 chickens on Joe's farm.

The first equation we can get from the information given is:c + h = 26

This equation is derived from the given information that there are 26 animals in the farm.

The second equation is derived from the given information that the total number of legs in the farm is 84:

4c + 2h = 84

Our aim is to find the number of cows and chickens in the farm.

We can use the two equations to solve for c and h.

c + h = 264c + 2

h = 84

Solving for c in terms of h from the first equation:

c = 26 - h

Substitute this value of c into the second equation and solve for h:

4c + 2h = 844(26 - h) + 2h

= 844x26 - 4h + 2h

= 336-2h

= -12h

= 6

Substitute the value of h into the equation c + h = 26 to find c:

c + h = 26

c + 6 = 26

c = 20

Therefore, there are 20 cows and 6 chickens on Joe's farm.

To know more about equation, visit:

https://brainly.com/question/29538993

#SPJ11

Answer:

v > 0 and 0 < u-v < 1, which is equivalent to v > 0 and u > v.

Step-by-step explanation:

We have the joint pdf of (X,Y) as:

f(x,y) = 12xy(1-x)

To find the support of (U,V), we need to determine the range of values that (U,V) can take. Let U = X + Y and V = Y.

Solving for X and Y, we get:

X = U - V and Y = V

The Jacobian of the transformation is:

J =  [tex]\frac{∂(x,y)}{∂(u,v)}[/tex] = det [[[tex]\frac{∂x}{∂u}[/tex], [tex]\frac{∂x}{∂v}[/tex]], [[tex]\frac{∂y}{∂u}[/tex], [tex]\frac{∂y}{∂v}[/tex]]]

= det [[1, -1], [0, 1]] = 1

So, the joint pdf of (U,V) is:

f(u,v) = f(x,y) |J| = 12(u-v)v(1-(u-v))([tex]\frac{1}{2}[/tex]) = 6v(u-v)(1-(u-v))

The support of (U,V) is the range of values of (u,v) for which f(u,v) is non-zero. Since f(u,v) is non-zero only if v > 0 and 0 < u-v < 1, the support of (U,V) can be described as:

v > 0 and 0 < u-v < 1, which is equivalent to v > 0 and u > v.

To know more about Jacobian refer here

https://brainly.com/question/31326284#

#SPJ11

After cross multiplying and simplifying the given equation 5/17 = x/10, the value if the missing variable x is equal to 50/17 or 5.88.

To solve the equation 5/17 = x/10 for x, we can use cross-multiplication. This means we can multiply both sides of the equation by 10 to isolate x on one side:

5/17 = x/10

10 * 5/17 = x

Simplifying the left-hand side of the equation:

50/17 = x

So x is equal to 50/17. This is the solution to the equation, and it represents the value of x that would make the equation true. When 5 is 17% of 10, the missing variable x is 5.88.

To learn more about missing variable click on,

https://brainly.com/question/24004472

#SPJ1

The value of the line integral ∫CF⋅dr is (-3cos(1) + 4sin(3) + 5)/3.

To evaluate the line integral ∫CF⋅dr, we need to compute the dot product F⋅dr along the path C=r(t) from t=0 to t=1.

First, we need to find the differential of the vector-valued function r(t):

dr/dt = <3t^2, 6t, 2>

Then, we can compute F(r(t)) and evaluate the dot product F(r(t))⋅(dr/dt):

F(r(t)) = <-3sin(t^3), 2cos(3t^2), 10t^3>

F(r(t))⋅(dr/dt) = (-9t^2sin(t^3)) + (12t^2cos(3t^2)) + (20t^4)

Now, we can integrate this expression over the interval [0,1] to get the value of the line integral:

∫CF⋅dr = ∫(F(r(t))⋅dr/dt)dt from 0 to 1

          = ∫((-9t^2sin(t^3)) + (12t^2cos(3t^2)) + (20t^4))dt from 0 to 1

          = (-3cos(1) + 4sin(3) + 5)/3

Therefore, the value of the line integral ∫CF⋅dr is (-3cos(1) + 4sin(3) + 5)/3.

To know more about line integral refer here:

https://brainly.com/question/30763905?#

#SPJ11

The percentage is 14.3% of the items collected in the clothing drive are shoes.

To find the percentage of shoes collected, we need to first determine the total number of items collected, and then divide the number of shoes by the total and multiply by 100 to get the percentage.

From the bar graph, we can see that the number of shoes collected is 20.

The total number of items collected can be found by adding up the number of items for each type of clothing: 60 + 40 + 20 + 20 = 140.

Now we can calculate the percentage of shoes collected:

percentage of shoes = (number of shoes / total number of items) x 100

= (20 / 140) x 100

= 14.3

percentage of shoes = 14.3%

Therefore, 14.3% of the items collected in the clothing drive are shoes.

To learn more on Percentage click:

https://brainly.com/question/24159063

#SPJ1

The volume of the pyramid is approximately 0.5 cubic inches.

To find the volume of a pyramid with a square base, we can use the formula V = (1/3)Bh,

where V is the volume,

B is the area of the base, and h is the height of the pyramid.

In this case, the base of the pyramid is a square with a perimeter of 5.1 inches.

The perimeter of a square is the sum of all its sides, so each side of the square base would be 5.1 inches divided by 4, which is 1.275 inches.

To find the area of the square base, we can use the formula [tex]A = side^2,[/tex] where A is the area and side is the length of one side of the square.

In this case, the side of the square base is 1.275 inches, so the area of the base is[tex]1.275^2 = 1.628[/tex] [tex]inches^2.[/tex]

Now, we can substitute the values into the volume formula:

V = (1/3)(1.628)(2.7)

V = 0.5426 cubic inches

Rounding to the nearest tenth of a cubic inch, the volume of the pyramid is approximately 0.5 cubic inches.

For similar question on pyramid.

https://brainly.com/question/30615121  

#SPJ8

The inequality describing this problem is given as follows:

4r + 2s > 30.

The variables for this problem are given as follows:

Bill will practice for more than 30 minutes, hence the inequality is given as follows:

4r + 2s > 30.

(the sign > is used as the sign is the more than symbol in inequality).

As we have more than and not at least in the sentence, the symbol used does not contain the equal sign, meaning that the interval is open.

The problem is given by the image presented at the end of the answer.

More can be learned about inequalities at brainly.com/question/25275758

#SPJ1

Hello !

9 times 4 added to the difference of 3 and 2

9    x     4     +                                        ( 3 - 2)

9 x 4 + (3 - 2)

Answer:

4/15

Step-by-step explanation:

multiple of 4: 4, 8, 12, 16, 20, 24, 28 = 7 options

19: 19 = 1 option

7+1 = 8

8/30 = 4/15

The space curves r1(t) and r2(t) intersect at two points.

To find the points of intersection between the space curves r1(t) and r2(t), we need to set their corresponding components equal to each other and solve for t. The curves are defined as follows:

r1(t) = (ht^2, 1 - t^2, t)

r2(t) = (1 - t^2, t, t)

Setting the x-components equal to each other, we have:

ht^2 = 1 - t^2

Simplifying, we get:

h = (1 - t^2) / t^2

Next, we set the y-components equal to each other:

1 - t^2 = t

Rearranging the equation, we have:

t^2 + t - 1 = 0

Solving this quadratic equation, we find two values for t: t ≈ 0.618 and t ≈ -1.618.

Substituting these values of t back into either of the equations, we can find the corresponding points of intersection in 3D space.

Therefore, the space curves r1(t) and r2(t) intersect at two points.

Learn more about quadratic equation here:

https://brainly.com/question/30098550

#SPJ11

It will take approximately 4.50 years for the bunny population at Long Beach City College to triple.

To calculate the number of years it will take for the bunny population to triple, we can use the formula for exponential growth:

N = N0 * e^(rt)

Where:

N0 = initial population size

N = final population size

r = growth rate (in decimal form)

t = time in years

e = Euler's number (approximately 2.71828)

In this case, the initial population size (N0) is 2,500, the growth rate (r) is 15.4% expressed as a decimal (0.154), and we want to find the time (t) it takes for the population to triple, which means the final population size (N) will be 3 times the initial population size.

Let's set up the equation:

3 * N0 = N0 * e^(0.154 * t)

Simplifying the equation:

3 = e^(0.154 * t)

To solve for t, we can take the natural logarithm of both sides:

ln(3) = 0.154 * t

Now we can solve for t:

t = ln(3) / 0.154

Using a calculator, we find that t is approximately 4.50 years.

Therefore, it will take approximately 4.50 years for the bunny population at Long Beach City College to triple.

Learn more about exponential growth here:

https://brainly.com/question/1596693

#SPJ11

The solution is: when 1/2 - 1/3 =x then x=1/6, the result of subtraction.

Here, we have,

given that,

1/2 - 1/3 =x

we know that,

Subtracting fractions include the subtraction of two or more fractions with the same or different denominators. Like fractions can be subtracted directly but for unlike fractions we need to make the denominators same first and then subtract them.

so, we have,

1/2 - 1/3

first step is to make denominators equal.

for this , the denominator will be equal to 6 which is 2x3

so, 1/3 = 2/6 and 1/2 = 3/6

so, the expression now becomes:

3/6 - 2/6

simply subtract numerators and the denominator will be 6 as well.

3/6 - 2/6 = 1/6

so, we get, 1/2 - 1/3 =x = 1/6.

Hence, The solution is: when 1/2 - 1/3 =x then x=1/6, the result of subtraction.

To learn more on subtraction click:

brainly.com/question/2346316

#SPJ1

Answer:

Step-by-step explanation: