The local amazon distribution center ships 5,000 packages per day. they randomly select 50 packages and find 4 have the wrong shipping label attached. predict how many of their daily packages may have the correct shipping label

Answers

Answer 1

4,600 packages may have the correct shipping label attached.

The local Amazon distribution center ships 5,000 packages daily. The distribution center randomly selects 50 packages to check for any issues with the shipping label. In 50 packages, only 4 packages have the wrong shipping label attached. Let's predict how many of their daily packages may have the correct shipping label attached.To determine the percentage of packages with the correct shipping label attached:Firstly, determine the percentage of packages with the incorrect shipping label attached.4/50 * 100% = 8% of packages with incorrect labels attachedTo determine the percentage of packages with the correct shipping label attached:100% - 8% = 92% of packages with the correct labels attached.

Therefore, 92% of the 5,000 packages shipped daily have the correct shipping label attached. To determine how many of the daily packages may have the correct shipping label attached:0.92 × 5,000 = 4,600 of the daily packages may have the correct shipping label attached.So, 4,600 packages may have the correct shipping label attached.

Learn more about Shipping here,On average, it takes one packaging and shipping employee 15 minutes to prepare a package and label, independent of the n...

https://brainly.com/question/24317138

#SPJ11


Related Questions

Compute the measure of the angle between 0 and 360 degrees swept counterclockwise from 3 o'clock position on the unit circle whose terminal ray intersects the circle at the point with given y -coordinate and in the given quadrant. FInd the degrees
A: y=0.7 in Quadrant II
B:y= -0.9 in Quadrant III.
C: y=-0.1 in Quadrant IV.

Answers

A) The point with y-coordinate 0.7 in Quadrant II, is approximately 134.47 degrees.

B) The point with y-coordinate -0.9 in Quadrant III, is approximately 216.87 degrees.

C) The point with y-coordinate -0.1 in Quadrant IV, is approximately 332.39 degrees.

To find the measure of the angle between 0 and 360 degrees counter-clockwise from the 3 o'clock position on the unit circle, we need to locate the point of intersection between the terminal ray and the unit circle based on the given y-coordinate and quadrant.

A) In Quadrant II, with a y-coordinate of 0.7, the terminal ray intersects the unit circle at an angle of approximately 134.47 degrees.

B) In Quadrant III, with a y-coordinate of -0.9, the terminal ray intersects the unit circle at an angle of approximately 216.87 degrees.

C) In Quadrant IV, with a y-coordinate of -0.1, the terminal ray intersects the unit circle at an angle of approximately 332.39 degrees.

To compute these angles, we use inverse trigonometric functions such as arccosine (for Quadrant II) and arcsine (for Quadrant III and IV), and convert the results from radians to degrees. These angles represent the counter-clockwise rotation from the positive x-axis on the unit circle to the terminal ray, providing the measure of the angle in the specified range of 0 to 360 degrees.

Learn more about angles here:

https://brainly.com/question/31818999

#SPJ11

the slant shear test is widely accepted for evaluating the bond of resinous repair materials to concrete; it utilizes cylinder specimens made of two identical halves bonded at 30°

Answers

Yes, the slant shear test is a common method used to evaluate the bond strength of resinous repair materials to concrete.

In this test, cylinder specimens are used, which are made by bonding two identical halves at a 30° angle to each other. The specimen is then placed in a testing machine, and a shear force is applied to the bonded area until the specimen fails. The maximum force that the specimen can withstand before failure is recorded, and this value is used to determine the bond strength of the repair material.

The slant shear test is a widely accepted method because it is relatively easy to perform and provides accurate results. It is also useful for determining the effectiveness of different types of repair materials and adhesives, and for evaluating the durability of the bond over time.

Learn more about  shear test  here:

https://brainly.com/question/23159729

#SPJ11

Explain what the following statement means. Polvnomials are closed under the operations of addition and subtraction. Provide one addition example and one subtraction example to demonstrate.

Answers

The statement means that when adding or subtracting polynomials, the result is always another polynomial. For example, adding [tex]2x^2 + 3x - 5[/tex]and [tex]x^2 - 2x + 1[/tex] yields [tex]3x^2 + x - 4,[/tex] which is a polynomial. Similarly, subtracting these polynomials gives [tex]x^2 + 5x - 4[/tex], also a polynomial.

The statement "Polynomials are closed under the operations of addition and subtraction" means that when we add or subtract two polynomials, the result is always another polynomial. In other words, the sum or difference of two polynomials will still be a polynomial.

An addition example:

Let's consider two polynomials:

p(x) =[tex]2x^2 + 3x - 5[/tex]

q(x) = [tex]x^2 - 2x + 1[/tex]

To add these two polynomials, we simply combine like terms:

p(x) + q(x) = [tex](2x^2 + x^2) + (3x - 2x) + (-5 + 1)[/tex]

= [tex]3x^2 + x - 4[/tex]

The result, [tex]3x^2 + x - 4[/tex], is also a polynomial.

A subtraction example:

Using the same polynomials, p(x) and q(x), we can subtract them:

p(x) - q(x) =[tex](2x^2 - x^2) + (3x - (-2x)) + (-5 - 1)[/tex]

= [tex]x^2 + 5x - 4[/tex]

Again, the result,[tex]x^2 + 5x - 4[/tex], is a polynomial.

In both examples, the addition and subtraction of polynomials resulted in another polynomial, demonstrating that polynomials are closed under these operations.

for such more question on polynomial

https://brainly.com/question/7297047

#SPJ11

you have 2 circles of radius r where the edge of each circle touches the center of the other. what is the area of their intersection?

Answers

The area of the Intersection between the two circles is approximately equal to r^2 times the quantity (π - 1.0472 + sin(1.0472))

When two circles of radius r touch each other such that the edge of each circle touches the center of the other, the shape formed is known as a vesica piscis. To find the area of the intersection between the two circles, we can calculate the area of the vesica piscis.

The vesica piscis is a shape formed by two overlapping circles, with the centers of each circle lying on the circumference of the other. The shape has a pointed oval or lens-like appearance.

To find the area of the vesica piscis, we can break it down into two symmetrical segments and a central lens-shaped region.

First, let's find the area of each segment. Each segment is formed by half of the circular region and a triangle.

The area of each segment is given by:

A_segment = (1/2) * r^2 * θ - (1/2) * r^2 * sin(θ)

where r is the radius of the circles, and θ is the angle formed at the center of each circle.

Since the circles touch each other, the angle θ can be calculated as:

θ = 2 * arccos((r/2) / r)

Simplifying, we get:

θ = 2 * arccos(1/2)

θ ≈ 1.0472 radians

Substituting the values of r and θ into the area formula, we can find the area of each segment.

A_segment ≈ (1/2) * r^2 * (1.0472) - (1/2) * r^2 * sin(1.0472)

Now, to find the area of the central lens-shaped region, we subtract the area of the two segments from the total area of a circle.

The total area of a circle is given by:

A_circle = π * r^2

The area of the intersection, A_intersection, is then given by:

A_intersection = A_circle - 2 * A_segment

Substituting the values and calculations, we have:

A_intersection ≈ π * r^2 - 2 * [(1/2) * r^2 * (1.0472) - (1/2) * r^2 * sin(1.0472)]

Simplifying further, we get:

A_intersection ≈ π * r^2 - r^2 * (1.0472 - sin(1.0472))

Finally, we can simplify the expression to:

A_intersection ≈ r^2 * (π - 1.0472 + sin(1.0472))

Therefore, the area of the intersection between the two circles is approximately equal to r^2 times the quantity (π - 1.0472 + sin(1.0472))

To know more about Intersection .

https://brainly.com/question/30768224

#SPJ11

The area of intersection of the two circles is given by the formula A = r^2 (pi/3 - (1/2) sqrt(3)).

The configuration described is known as a kissing circles configuration or Apollonian circles. The area of the intersection of the two circles can be found using the formula:

A = r^2 (cos^-1(d/2r) - (d/2r) sqrt(1 - d^2/4r^2))

where r is the radius of each circle and d is the distance between their centers, which is equal to 2r.

Substituting d = 2r into the formula, we get:

A = r^2 (cos^-1(1/2) - (1/2) sqrt(3))

Using the value of cos^-1(1/2) = pi/3, we simplify:

A = r^2 (pi/3 - (1/2) sqrt(3))

Know more about circles here;

https://brainly.com/question/29142813

#SPJ11

what is the probability that total waiting time is either less than 2 min or more than 7 min?

Answers

Without additional information, it is difficult to provide a specific answer. However, if we assume that the total waiting time follows a probability distribution such as the exponential distribution, we can calculate the probability as follows:

Let X be the total waiting time. Then, X can be expressed as the sum of two independent waiting times, X1 and X2.

Let f(x) be the probability density function of X. Then, we can use the cumulative distribution function (CDF) of X to calculate the probability that the total waiting time is either less than 2 min or more than 7 min.

P(X < 2 or X > 7) = P(X < 2) + P(X > 7)

Using the properties of the CDF, we can express this probability as:

P(X < 2 or X > 7) = 1 - P(2 ≤ X ≤ 7)

Next, we can use the fact that the waiting times are independent and identically distributed to express the probability in terms of the CDF of X1:

P(2 ≤ X ≤ 7) = ∫2^7 ∫0^(7-x1) f(x1) f(x2) dx2 dx1

If we assume that the waiting times follow the exponential distribution with parameter λ, then the probability density function is given by:

f(x) = λe^(-λx)

Substituting this into the above expression and evaluating the integral, we get:

P(2 ≤ X ≤ 7) = 1 - e^(-5λ) - 5λe^(-5λ)

Therefore, the probability that the total waiting time is either less than 2 min or more than 7 min is:

P(X < 2 or X > 7) = 1 - (1 - e^(-5λ) - 5λe^(-5λ)) = e^(-5λ) + 5λe^(-5λ)

Again, this is based on the assumption that the waiting times follow the exponential distribution with parameter λ.

If a different distribution is assumed, the probability calculation would be different.

To know more about probability refer here:

https://brainly.com/question/30034780?#

#SPJ11

Which expressions are equivalent to 4d+6+2d4d+6+2d4, d, plus, 6, plus, 2, d ?

Choose all answers that apply:

Answers

The expressions equivalent to 4d+6+2d4d+6+2d4, d, plus, 6, plus, 2, d are 8d + 12.

In the given expression, 4d represents 4 times the variable d, and 2d4 represents 2 times the product of d and 4. The expression can be simplified by combining like terms. Combining the coefficients of d, we have 4d + 2d, which gives us 6d. The constants 6 and 2d4 remain unchanged. Therefore, the simplified expression is 6d + 6 + 2d4.

To further simplify the expression, we can combine the constants. 6 and 6 add up to 12. Thus, the equivalent expression is 6d + 12 + 2d4. Since 6d and 2d4 are not like terms, we cannot combine them further. Hence, the final simplified expression is 8d + 12, which means 8 times d plus 12.

In summary, the expressions equivalent to 4d+6+2d4d+6+2d4, d, plus, 6, plus, 2, d are 8d + 12. This simplification is achieved by combining like terms, where the coefficients of d are added together and the constants are added together to obtain the final expression.

Learn more about equivalent here:

https://brainly.com/question/25197597

#SPJ11

the regression equation is ŷ = 29.29 − 0.64x, the sample size is 8, and the standard error of the slope is 0.22. what is the test statistic to test the significance of the slope?

Answers

The test statistic to test the significance of the slope in this regression equation is approximately -2.91.

To test the significance of the slope in the regression equation ŷ = 29.29 - 0.64x with a sample size of 8 and a standard error of the slope equal to 0.22, you can use the t-test statistic. The t-test statistic measures the difference between the observed slope and the null hypothesis slope (which is typically 0, assuming no relationship between the variables) divided by the standard error of the slope.

In this case, the null hypothesis slope (H₀) is 0, the observed slope (b₁) is -0.64, and the standard error of the slope (SE) is 0.22. To calculate the test statistic (t), use the following formula:

t = (b₁ - H₀) / SE

Substitute the given values:

t = (-0.64 - 0) / 0.22

t = -0.64 / 0.22

t ≈ -2.91

The test statistic to test the significance of the slope in this regression equation is approximately -2.91. You can use this value to determine the p-value and assess the significance of the relationship between the variables based on a chosen significance level (e.g., 0.05).

To know more about regression equation, refer to the link below:

https://brainly.com/question/28196337#

#SPJ11

First, determine the quadrant for 0; then find x, y, and r; and finally, give all six trigonometric ratios for given the following information: sin(O) = -1, and cos(e) > 0 e lives in quadrant 3 • X= .y= • P= 1. sin(O) = 2. cos(0) = 3. tan(O) = 4. sec(0) = 5. csc(0) = 6. cot(0) =

Answers

Given the information sin(O) = -1 and cos(e) > 0 with e in quadrant 3, we can determine the quadrant, x, y, and r values, and then find the six trigonometric ratios for O.

First, determine the quadrant for O:
Since sin(O) = -1 and cos(e) > 0, we know that O is in quadrant 4, where sine is negative and cosine is positive.

Next, find x, y, and r:
Given sin(O) = -1, we know that y/r = -1. Since sin(O) is at its minimum, this occurs when y = -1 and r = 1. With e in quadrant 3, x must be negative. Since cos²(e) + sin²(e) = 1, we have x² + (-1)² = 1, so x² = 0, and x = 0.

Now, calculate the six trigonometric ratios for O:
1. sin(O) = y/r = -1/1 = -1
2. cos(O) = x/r = 0/1 = 0
3. tan(O) = y/x = -1/0 (undefined, as we cannot divide by 0)
4. sec(O) = r/x = 1/0 (undefined, as we cannot divide by 0)
5. csc(O) = r/y = 1/-1 = -1
6. cot(O) = x/y = 0/-1 = 0

So, O is in quadrant 4 with x=0, y=-1, and r=1. The trigonometric ratios are sin(O)=-1, cos(O)=0, tan(O)=undefined, sec(O)=undefined, csc(O)=-1, and cot(O)=0.

To know more about trigonometry visit:

https://brainly.com/question/13729598

#SPJ11

Based on actual experiments conducted by one of the engineers, they found out that each person

consumes 3 quarters of a bucket in a 10minute bath time using a shower head. If each person uses

the conventional "tabo" in a 10-minute bath time, he will consume 2 buckets of water. The actual

rate of the water consumption is Php33. 83/Cubic meter. There are 5 persons in the household and

each is taking a 10-minute bath time every day. How much do they save a month if they are all

using shower head vs if they are all using tabo

Answers

The household would save approximately Php203.55 per month by using a shower head for bathing instead of a "tabo".

If all five persons in the household use a shower head for a 10-minute bath each day, they would consume a total of 3.75 cubic meters of water per month. On the other hand, if they all use a "tabo" for their baths, they would consume a total of 10 cubic meters of water per month. Given the water rate of Php33.83 per cubic meter, they would save Php203.55 per month by using a shower head instead of a "tabo" for bathing.

Each person using a shower head consumes 3/4 of a bucket of water in a 10-minute bath time, which is equivalent to 0.75 cubic meters. Since there are five persons in the household, the total water consumption per month using a shower head would be 0.75 cubic meters/person/day * 5 persons * 30 days = 3.75 cubic meters/month.

On the other hand, if they all use a "tabo" for bathing, each person would consume 2 buckets of water, which is equivalent to 2 cubic meters, in a 10-minute bath time. So the total water consumption per month using a "tabo" would be 2 cubic meters/person/day * 5 persons * 30 days = 10 cubic meters/month.

Given the water rate of Php33.83 per cubic meter, the monthly savings by using a shower head instead of a "tabo" can be calculated as follows:

Savings = Water consumption with "tabo" - Water consumption with shower head

Savings = (10 cubic meters/month - 3.75 cubic meters/month) * Php33.83/cubic meter

Savings ≈ Php203.55 per month

Learn more about rate here:

https://brainly.com/question/1320388

#SPJ11

Use the Trapezoidal Rule to approximate the integral integral cos 2x dx on [0, pi] with n = 6. Then, to check your solutions, use the Fundamental Theorem of Calculus. Do the answers make sense?

Answers

The approximation using the Trapezoidal Rule and the exact answer using the Fundamental Theorem of Calculus both make sense.

Using the Trapezoidal Rule, we have:

h = (pi - 0)/6 = pi/6

cos(0) + 2(cos(pi/6) + cos(pi/3) + cos(pi/2) + cos(2pi/3) + cos(5pi/6)) + cos(pi)

= 1 + 2(0.866 + 0.5 + 0 - 0.5 - 0.866) + (-1)

= 0

Using the Fundamental Theorem of Calculus, we have:

∫ cos 2x dx = [sin 2x / 2] from 0 to pi

= (sin 2pi / 2) - (sin 0 / 2)

= 0

Since both methods give us an answer of 0, the answer makes sense. The integral of a periodic function over one period, such as cos 2x over [0, pi], evaluates to 0.

For such more questions on Trapezoidal Rule:

https://brainly.com/question/30425931

#SPJ11

The answers make sense since the integral of cos 2x over [0, pi] is negative and our approximations are also negative. Additionally, the Fundamental Theorem of Calculus confirms our approximation.

Using the Trapezoidal Rule with n=6, we have:

delta_x = (pi - 0) / 6 = pi/6

x_0 = 0, x_1 = pi/6, x_2 = 2pi/6, x_3 = 3pi/6, x_4 = 4pi/6, x_5 = 5pi/6, x_6 = pi

f(x_0) = cos(20) = 1

f(x_1) = cos(2pi/6) = sqrt(3)/2

f(x_2) = cos(22pi/6) = 0

f(x_3) = cos(23pi/6) = -1

f(x_4) = cos(24pi/6) = 0

f(x_5) = cos(25pi/6) = -sqrt(3)/2

f(x_6) = cos(2*pi) = 1

Using the Trapezoidal Rule formula, we have:

integral cos 2x dx = (delta_x/2) * [f(x_0) + 2f(x_1) + 2f(x_2) + 2f(x_3) + 2f(x_4) + 2f(x_5) + f(x_6)]

= (pi/36) * [1 + 2sqrt(3)/2 + 2(0) + 2(-1) + 2(0) + 2(-sqrt(3)/2) + 1]

= (pi/36) * [-2 + sqrt(3)]

≈ -0.471

To check our solution, we can use the Fundamental Theorem of Calculus:

F(x) = (1/2) * sin(2x)

F(pi) - F(0) = (1/2) * (sin(2pi) - sin(20)) = 0

F(pi) - F(0) ≈ -0.471

Know more about Trapezoidal Rule here:

https://brainly.com/question/31957183

#SPJ11

in problems 17–20 the given vectors are solutions of a system x9 = ax. determine whether the vectors form a fundamental set on the interval (−`, `).

Answers

In order to determine whether the given vectors form a fundamental set on the interval (-∞, ∞), we need to consider the concept of linear independence. A set of vectors is considered linearly independent if no vector in the set can be expressed as a linear combination of the others.

To determine whether the given vectors form a fundamental set, we need to check whether they are linearly independent. This can be done by forming a matrix with the given vectors as columns and then finding the determinant of the matrix. If the determinant is non-zero, then the vectors are linearly independent and form a fundamental set.

However, since the given system x9 = ax is not a differential equation, we cannot directly apply this method. Instead, we need to check whether the given vectors satisfy the conditions of linear independence. This can be done by checking whether the vectors are linearly independent using standard linear algebra techniques.

If the given vectors are linearly independent, then they will form a fundamental set on the interval (-∞, ∞). However, if they are linearly dependent, then they will not form a fundamental set, and we would need to find additional solutions to the system in order to form a fundamental set.

To know more about Vector visit :

https://brainly.com/question/13322477

#SPJ11

At a music festival, there are nine bands scheduled to play, numbered 1 through 9. a. How many different ways can these bands be arranged to perform? b. If band 8 is performing first and band 2 last, then how many ways can their appearances be scheduled? a. There are 362,880 different ways to arrange the bands. (Simplify your answer.) different ways to arrange the bands. b. If band 8 is performing first and band 2 last, there are (Simplify your answer.)

Answers

a. There are 362,880 different ways to arrange the bands.

b. If band 8 is performing first and band 2 last, there are 40,320 different ways to schedule their appearances.

To find the number of different ways to arrange the bands, we use the concept of permutations. Since there are 9 bands, we have 9 options for the first slot, 8 options for the second slot, 7 options for the third slot, and so on. Therefore, the total number of arrangements is 9 × 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 362,880.

b. Given that band 8 is performing first and band 2 last, we fix these two positions. Now we have 7 bands left to fill the remaining 7 slots. We can arrange these 7 bands in 7! (7 factorial) ways, which is equal to 7 × 6 × 5 × 4 × 3 × 2 × 1 = 5,040.

However, since we have already fixed the positions for bands 8 and 2, we need to multiply this by the number of ways to arrange the remaining bands, which is 7!. Therefore, the total number of ways to schedule their appearances is 5,040 × 7! = 40,320.

For more questions like Permutations click the link below:

https://brainly.com/question/29990226

#SPJ11

Solve for x: (2x - 3)° (10x-17)°

Answers

Answer:

x = 13

------------------------

Use the triangle in the middle.

It has interior angles 2x - 3 and a right angle. The exterior angle is 10x - 17.

We know the exterior angle of a triangle is same as the sum of the two remote interior angles.

Set up an equation and solve for x:

2x - 3 + 90 = 10x - 172x + 87 = 10x - 1710x - 2x = 87 + 178x = 104x = 104/8x = 13

So the value of x is 13.

suppose that we roll a fair die until a 6 comes up or we have rolled it 10 times. what is the expected number of times we roll the die? what is the variance?

Answers

Thus, the expected number of times we roll the die is 2.213, and the variance is 1.627.

In this case, the probability of rolling a 6 is 1/6, and the probability of not rolling a 6 is 5/6. Since we stop rolling after 10 tries, we need to consider the expected value and variance for a truncated geometric distribution.

The expected number of times we roll the die is given by:

E(X) = Σ [x * P(X=x)], where x ranges from 1 to 10.

For x = 1 to 9, P(X=x) = (5/6)^(x-1) * (1/6).
For x = 10, P(X=10) = (5/6)^9, as we stop rolling after the 10th attempt.

Calculate E(X) using the given formula, and you'll find that the expected number of times we roll the die is approximately 2.213.

For variance, we use the following formula:

Var(X) = E(X^2) - E(X)^2

To find E(X^2), compute Σ [x^2 * P(X=x)] for x from 1 to 10 using the same probabilities as before.

Calculate Var(X) using the given formula, and you'll find that the variance is approximately 1.627.

So, the expected number of times we roll the die is 2.213, and the variance is 1.627.

Know more about the geometric distribution

https://brainly.com/question/30360260

#SPJ11

Rewrite the function f(x) = 4(x-3)²-12 in the form f(x) = ax2²+bx+c.

Answers

Answer:

4x² - 24x +24

Step-by-step explanation:

4(x-3)² -12= 4( x²-6x +9) -12

= 4x² -24x +36 -12

= 4x² -24x + 24

what is the probability that the first person who subscribes to the five second rule is the 5th person you talk to

Answers

The probability that the first person who subscribes to the five-second rule is the 5th person you talk to is q⁴ * p.

To calculate the probability that the first person who subscribes to the five-second rule is the 5th person you talk to, we need to consider the following terms: probability, independent events, and complementary events.

Step 1: Determine the probability of a single event.
Let's assume the probability of a person subscribing to the five-second rule is p, and the probability of a person not subscribing to the five-second rule is q. Since these are complementary events, p + q = 1.

Step 2: Consider the first four people not subscribing to the rule.
Since we want the 5th person to be the first one subscribing to the rule, the first four people must not subscribe to it. The probability of this happening is q * q * q * q, or q⁴.

Step 3: Calculate the probability of the 5th person subscribing to the rule.
Now, we need to multiply the probability of the first four people not subscribing (q^4) by the probability of the 5th person subscribing (p).

The probability that the first person who subscribes to the five-second rule is the 5th person you talk to is q⁴ * p.

To learn more about Probability

https://brainly.com/question/24870672

#SPJ11

0.277 D Regression Statistics Multiple R R Square Adjusted R Square Standard Error Observations 0.038 1.552 100 ANOVA df F Significance F 1.976 0.104 4 Regression Residual Total SS 19.042 228.918 247.960 MS 4.760 2.410 95 99 Intercept X1 Coefficients Standard Error 7.505 1.213 0.147 0.057 -0.105 0.055 0.001 0.001 0.095 0.311 t Stat 6.187 2.594 -1.902 с 0.305 P-value 0.000 0.011 0.060 0.063 0.761 Lower 95% Upper 95% 5.097 9.913 0.034 0.259 A B 0.000 0.002 -0.523 0.713 X2 X3 X4 A statistician wants to investigate a phenomenon using multiple regression analysis. She uses four independent variables: X1, X2, X3, and X4, and her dependent variable is Y. To estimate the multiple regression model, she uses the ordinary least squares estimator. The estimation results are given in the output table below. Answer the following questions: 1. (4 points) Interpret the parameter estimate of X1. Explain. 2. (4 points) X4 is a dummy variable. How would you interpret the parameter estimate of X4? Explain. 3. (3 points) Which parameter estimates are statistically significant at 5% level of significance. Interpret. 4. (4 points) Calculate the 95% confidence interval of X2 (A=? and B=?). Use t-value = 1.96 in your calculations. Write down the formula and how you calculate them. Explain. 5. (3 points) Test the hypothesis that whether the overall model is statistically significant. Which test do you use? What is the decision? Explain. 6. (3 points) Calculate the value of t-statistics (C=?) for X3. Write down the formula and explain. 7. (5 points) Calculate and interpret the R-squared of the model (D=?). Discuss if the fit is good or not. Explain.

Answers

The parameter estimate of X1 is 0.147. It means that, holding all other variables constant, a unit increase in X1 is associated with a 0.147 increase in Y.

X4 is a dummy variable, which takes the value of 1 if a certain condition is met and 0 otherwise. The parameter estimate of X4 is -0.105, which means that, on average, the value of Y decreases by 0.105 units when X4 equals 1 (compared to when X4 equals 0).

The parameter estimates that are statistically significant at 5% level of significance are X1 and X2. This can be determined by looking at the p-values in the table. The p-value for X1 is less than 0.05, which means that the parameter estimate for X1 is statistically significant.

Similarly, the p-value for X2 is less than 0.05, which means that the parameter estimate for X2 is statistically significant.

The 95% confidence interval for X2 can be calculated using the formula:

B ± t-value * SE(B)

where B is the parameter estimate for X2, t-value is 1.96 (for a 95% confidence interval), and SE(B) is the standard error of the parameter estimate for X2. From the table, the parameter estimate for X2 is 0.001 and the standard error is 0.001. Thus, the 95% confidence interval is:

0.001 ± 1.96 * 0.001 = (-0.001, 0.003)

This means that we can be 95% confident that the true value of the parameter estimate for X2 falls between -0.001 and 0.003.

To test whether the overall model is statistically significant, we use the F-test. The null hypothesis is that all the regression coefficients are zero (i.e., there is no linear relationship between the independent variables and the dependent variable).

The alternative hypothesis is that at least one of the regression coefficients is non-zero (i.e., there is a linear relationship between the independent variables and the dependent variable).

From the ANOVA table in the output, the F-statistic is 1.976 and the p-value is 0.104. Since the p-value is greater than 0.05, we fail to reject the null hypothesis and conclude that there is not enough evidence to suggest that the overall model is statistically significant.

The t-statistic for X3 can be calculated using the formula:

t = (B - 0) / SE(B)

where B is the parameter estimate for X3, and SE(B) is the standard error of the parameter estimate for X3. From the table, the parameter estimate for X3 is 0.095 and the standard error is 0.311. Thus, the t-statistic is:

t = (0.095 - 0) / 0.311 = 0.306

The R-squared of the model is 0.038, which means that only 3.8% of the variation in the dependent variable (Y) can be explained by the independent variables (X1, X2, X3, X4). This suggests that the fit is not very good, and there may be other factors that are influencing Y that are not captured by the model.

However, it is important to note that a low R-squared does not necessarily mean that the model is not useful or informative. It just means that there is a lot of unexplained variation in Y.

To know more about null hypothesis  refer here:

https://brainly.com/question/28920252

#SPJ11

f x and y are independent, what can you conclude about cov(x, y)?

Answers

We can conclude that cov(x, y) = E[xy] - E[x] E[y] = 0 - E[x] E[y] = 0, since x and y are independent.

If x and y are independent, then their covariance cov(x, y) is equal to 0. This is because the formula for covariance is:

cov(x, y) = E[(x - E[x])(y - E[y])]

Since x and y are independent, their joint probability density function can be factored as:

f(x, y) = f(x)f(y)

where f(x) and f(y) are the marginal probability density functions of x and y, respectively. Therefore, the expected values of x and y can be written as:

E[x] = ∫x f(x) dxE[y] = ∫y f(y) dy

Then, the covariance can be expressed as:

cov(x, y) = E[(x - E[x])(y - E[y])]

= E[x y] - E[x] E[y]

Using the fact that x and y are independent, we have:

E[xy] = ∫∫x y f(x, y) dx dy

= ∫∫x y f(x) f(y) dx dy

= ∫x x f(x) dx ∫y y f(y) dy

= E[x] E[y].

For such more questions on Independent:

https://brainly.com/question/25223322

#SPJ11

use the definition to find an expression for the area under the graph of f as a limit. do not evaluate the limit. f ( x ) = x 2 √ 1 2 x , 2 ≤ x ≤ 4 lim n → [infinity] n ∑ i = 1

Answers

Using the Riemann sum, we divide the interval [2, 4] into n equal subintervals, where Δx = (4 - 2) / n.

To find the expression for the area under the graph of the function f(x) = x^2 √(1/2x) as a limit, we can use the definition of a Riemann sum and take the limit as n approaches infinity of the sum from i = 1 to n.

The Riemann sum is a method to approximate the area under a curve by dividing it into smaller rectangular regions. In this case, we need to express the area under the graph of f(x) as a limit of a Riemann sum.

The expression for the area under the graph of f(x) as a limit is given by:

lim n → ∞ Σ i=1^n [f(xi) Δx]

In this formula, xi represents the ith subinterval, Δx represents the width of each subinterval, and f(xi) represents the value of the function at a point within the ith subinterval.

To calculate the Riemann sum, we divide the interval [2, 4] into n equal subintervals, where Δx = (4 - 2) / n. Then, for each subinterval, we evaluate f(xi) and multiply it by Δx. Finally, we sum up all these values as n approaches infinity.

However, without evaluating the limit or specifying the specific method of partitioning the interval, it is not possible to provide a more precise expression for the area. The given information is insufficient to calculate the exact value.

Learn more about area here:

https://brainly.com/question/30307509

#SPJ11

Let d = gcd(a, b). If a = da' and b = db', show that gcd(a', b') = 1.

Answers

Answer:

Step-by-step explanation:

Suppose gcd(a', b') = k > 1, then k divides both a' and b'. Therefore, k also divides a = da' and b = db'. But since d is the greatest common divisor of a and b, we must have d ≤ k.

On the other hand, we can write d as a linear combination of a and b, i.e., d = ma + nb for some integers m and n. Substituting a = da' and b = db' gives:

d = ma' da + nb' db'

= (ma' + nb' d) a

Since k divides both a' and b', it also divides ma' + nb' d. Thus, k divides d and a, which implies k ≤ d.

Combining the inequalities d ≤ k and k ≤ d, we get d = k.

To Know more about gcd refer here

https://brainly.com/question/25550841#

#SPJ11

according to the central limit theorem, when n=9, the variance of the distribution of means is:

Answers

According to the central limit theorem, when n=9, the variance of the distribution of means is equal to the population variance divided by the sample size.

Let σ^2 be the population variance. Then, the variance of the distribution of means (also known as the standard error) is σ^2/n.

The central limit theorem states that as the sample size increases, the distribution of sample means approaches a normal distribution with mean μ and variance σ^2/n, where μ is the population mean. Therefore, when n=9, the variance of the distribution of means is σ^2/9.

In summary, when n=9, the variance of the distribution of means is equal to the population variance divided by the sample size, which is σ^2/9.

To know more about variance, visit;

https://brainly.com/question/25639778

#SPJ11

determine whether the sequence converges or diverges. if it converges, find the limit. (if an answer does not exist, enter dne.) an = tan 5n 3 20n

Answers

The given sequence converges.

The limit of the given sequence is :  1/4.

The given sequence is an = tan(5n)/(3 + 20n).
To determine if the sequence converges or diverges, we can use the limit comparison test.
We know that lim n→∞ tan(5n) = dne, since the tangent function oscillates between -∞ and +∞ as n gets larger.
Thus, we need to find another sequence bn that is always positive and converges/diverges.

Let's try bn = 1/(20n).
Then, we have lim n→∞ (tan(5n)/(3 + 20n)) / (1/(20n))
= lim n→∞ (tan(5n) * 20n) / (3 + 20n)
= lim n→∞ (tan(5n) / 5n) * (5 * 20n) / (3 + 20n)
= 5 lim n→∞ (tan(5n) / 5n) * (20n / (3 + 20n))

Now, we know that lim n→∞ (tan(5n) / 5n) = 1, by the squeeze theorem.

And we also have lim n→∞ (20n / (3 + 20n)) = 20/20 = 1, by dividing both numerator and denominator by n.

Therefore, the limit comparison test yields:
lim n→∞ (tan(5n)/(3 + 20n)) / (1/(20n)) = 5

Since the limit comparison test shows that the given sequence is similar to a convergent sequence, we can conclude that the given sequence converges.

To find the limit, we can use L'Hopital's rule to evaluate the limit of the numerator and denominator separately as n approaches infinity:
lim n→∞ tan(5n)/(3 + 20n) = lim n→∞ (5sec^2(5n))/(20) = lim n→∞ (1/4)sec^2(5n) = 1/4.

Therefore, the limit of the given sequence is 1/4.

To learn more about sequences visit : https://brainly.com/question/28169281

#SPJ11

Use the Integral Test to determine whether the series is convergent or divergent.
[infinity] n = 1
n2e−n3
Evaluate the following integral.
[infinity]
1
x2e−x3 dx
I know that it is convergent, I just do not know how to solve it.

Answers

The series is convergent.

To determine this using the Integral Test, evaluate the integral: ∫(1/x²)e⁻ˣ³ dx from 1 to infinity.


1. Define the function f(x) = ((1/x²)e⁻ˣ³.
2. Ensure f(x) is positive, continuous, and decreasing on [1, infinity).
3. Evaluate the integral: ∫((1/x²)e⁻ˣ³ dx from 1 to infinity.
4. If the integral converges, the series converges; if it diverges, the series diverges.
5. Using substitution, let u = -x³ and du = -3x² dx.
6. Change the integral to ∫-1/3 * [tex]e^u[/tex] du from -1 to -infinity.
7. Evaluate the integral and find that it converges.
8. Conclude that the series is convergent.

To know more about Integral Test click on below link:

https://brainly.com/question/28157842#

#SPJ11

some tests are developed using criterion groups. others are developed using factor analysis and/or theory. list one test which used each developmental strategy

Answers

One test that used criterion groups as a developmental strategy is the Graduate Record Examinations (GRE). The GRE is a standardized test commonly used for admission into graduate programs in various fields. During the development of the GRE, a criterion group strategy was employed.

The criterion group strategy involves selecting a group of individuals who are already deemed successful or proficient in the field being assessed. In the case of the GRE, the criterion group consisted of graduate students who were performing well academically. The test developers administered the test to this group of high-achieving individuals and analyzed their performance to establish a benchmark or criterion for success.

By examining the performance of the criterion group, the test developers were able to identify the types of questions and content areas that distinguished successful students from those who were less successful. This information was then used to design the test items and determine the scoring criteria for the GRE. The test was tailored to assess the knowledge and skills that were identified as important indicators of success in graduate-level study.

Now let's consider an example of a test that used factor analysis and/or theory as a developmental strategy. The Minnesota Multiphasic Personality Inventory (MMPI) is a psychological assessment tool that used factor analysis and theory during its development.

The MMPI is a widely used personality test that assesses various aspects of an individual's personality, psychopathology, and clinical disorders. It was developed by Starke R. Hathaway and J.C. McKinley in the late 1930s. In the development process, they employed a combination of factor analysis and theoretical considerations.

Factor analysis is a statistical technique used to identify underlying dimensions or factors that explain the relationships among a set of observed variables. In the case of the MMPI, factor analysis was utilized to identify the main dimensions or factors of personality and psychopathology that the test should measure. Through extensive data analysis and item selection, the test developers identified several key factors, such as depression, hypochondriasis, hysteria, and social introversion.

Additionally, the developers of the MMPI incorporated theoretical considerations in the selection and construction of the test items. They drew upon existing theories and knowledge in the field of personality and psychopathology to guide their item selection process. The test items were designed to capture the manifestations of specific personality traits and clinical symptoms that were theoretically relevant.

The combination of factor analysis and theoretical considerations allowed the developers of the MMPI to create a comprehensive and reliable instrument for assessing personality and psychopathology. The test has undergone several revisions and updates over the years, but its foundation in factor analysis and theory has remained integral to its development and continued use in psychological assessment.

In summary, the GRE utilized the criterion group strategy during its development, where the performance of successful graduate students served as a benchmark for test design. On the other hand, the MMPI employed factor analysis and theoretical considerations to identify key dimensions of personality and psychopathology, resulting in a comprehensive assessment tool. Both tests demonstrate the application of different developmental strategies to ensure the validity and reliability of the assessments.

TO learn more about  GRE click here:

brainly.com/question/32332563

#SPJ11

A binary tree with height 5 has 11 terminal vertices at most 32 terminal vertices O at least 5 terminal vertices O 11 total vertices

Answers

There are at least 5 terminal vertices in a binary tree with height 5.

Each node in a binary tree can have a maximum of two children: a left child and a right child. Leaf nodes, also referred to as terminal vertices, are nodes without offspring.

The greatest number of levels from the root to any terminal vertex in a binary tree with height 5 is 5. The number of terminal vertices at level 5 is the highest feasible in this tree because each level can only contain two more nodes than the level below it (each node can have two children).

We must take into account the case where each level from 1 to 5 is entirely filled with nodes in order to have at least 5 terminal vertices.

To know more about binary tree,

https://brainly.com/question/13152383

#SPJ11

convert -8410 to 8-bit 1’s complement representation. group of answer choices A.1110 01001c B.0101 00111c 1
C.110 01011c D.0001 11001c E.none of the options

Answers

To convert -8410 to 8-bit 1's complement representation, we need to follow a specific procedure. In 1's complement representation, the sign of the number is indicated by the leftmost bit (the most significant bit).

Here's the step-by-step process:

Start with the binary representation of the positive equivalent of the number. In this case, the positive equivalent of -8410 is 100001011010.

Determine the most significant bit (MSB), which represents the sign of the number. In this case, the MSB is 1 since the number is negative.

In 1's complement representation, to obtain the negative equivalent of a number, we need to invert all the bits (0s become 1s and 1s become 0s).

Apply the bit inversion to all the bits except the MSB. In this case, we invert all the bits except the leftmost bit (MSB).

Following this procedure, the 8-bit 1's complement representation of -8410 would be 11101010. However, none of the provided options A, B, C, or D matches this representation. Therefore, the correct answer would be E. (none of the options).

It's important to note that in 1's complement representation, the leftmost bit (MSB) is reserved for representing the sign of the number. In two's complement representation, another commonly used representation, negative numbers are represented by the binary value obtained by adding 1 to the 1's complement representation.

Learn more about negative numbers here: brainly.com/question/32386184

#SPJ11

Letv→1=[0.5−0.50.50.5], v→2=[−0.5−0.5−0.50.5], v→3=[−0.50.50.50.5].Find a vector v→4 in R4 such that the vectors v→1, v→2, v→3, and v→4 are orthonormal.
v→4= [

Answers

To find a vector v→4 such that the vectors v→1, v→2, v→3, and v→4 are orthonormal, the vector v→4 can be calculated as [0, -0.5, 0.5, -0.5].

For the vectors v→1, v→2, v→3, and v→4 to be orthonormal, they need to satisfy two conditions: they must be orthogonal (perpendicular to each other) and each vector must have a magnitude of 1 (unit length).

Given that v→1, v→2, and v→3 are provided, we can choose v→4 such that it is orthogonal to the other vectors and has a magnitude of 1. Since v→1, v→2, and v→3 are in R4, v→4 must also be a four-dimensional vector in R4.

Observing the pattern in the given vectors, we can see that v→4 can be chosen as [0, -0.5, 0.5, -0.5].

This vector satisfies the condition of orthogonality with v→1, v→2, and v→3 since its dot product with each of those vectors is zero.

Additionally, the magnitude of v→4 is

√(0^2 + (-0.5)^2 + 0.5^2 + (-0.5)^2) = √(0.5) = 1,

satisfying the condition of unit length.

Thus, v→4 = [0, -0.5, 0.5, -0.5] is a vector that makes the set of vectors orthonormal.

Learn more about orthonormal here: brainly.com/question/30882267

#SPJ11

a series an is defined by the equations a1 = 2 an 1 = 3 cos(n) n · an. determine whether an is absolutely convergent, conditionally convergent, or divergent. absolutely convergent conditionally convergent divergent For what values of x is xn/n! convergent? x ge 0 for all x none x le 0 x < 0 What conclusion can be drawn about lim n rightarrow infinty xn/n!? lim n rightarrow infinity xn/n! = 0 only for x < 0 lin n rightarrow infinity xn/n! = 0 for all values of x No conclusion can be drawn. lim n rightarrow infinity xn/n! = 0 only for x > 0 lim n rightarrow infinity xn/n! = infinity for all values of x

Answers

The correct answer is "lim n rightarrow infinity xn/n! = 0 for all values of x."

To determine whether the series an is absolutely convergent, conditionally convergent, or divergent, we need to apply the appropriate tests. One possible test to use is the ratio test, which compares the absolute value of consecutive terms. Applying the ratio test to the series an, we get:

|an+1/an| = |(3cos(n+1))/(n+1)| ≤ 3/|n+1|

Since the limit of 3/|n+1| as n approaches infinity is zero, the series an is absolutely convergent by the ratio test.

Moving on to the second part of the question, we want to determine for what values of x the series xn/n! is convergent. This series is also known as the power series for e^x. The series converges for all x, which means the correct answer is "x ge 0 for all x."

Finally, we are asked to draw a conclusion about the limit of xn/n! as n approaches infinity. Using the ratio test, we can show that this limit is zero for all values of x.

To learn more about : values

https://brainly.com/question/843074

#SPJ11

For the first series, we have:

an = 2, 6cos(1), 18cos(2), 54cos(3), ...

We can use the ratio test to determine whether this series is absolutely convergent, conditionally convergent, or divergent:

|an+1/an| = 3|cos(n+1)/cos(n)|

Since the cosine function oscillates between -1 and 1, the ratio |an+1/an| is not bounded as n goes to infinity. Therefore, the series is divergent.

For the second question, we want to find the values of x such that the series

xn/n! = x/1! + x^2/2! + x^3/3! + ...

is convergent. This is the power series expansion of the exponential function e^x, so the series converges for all real values of x. Therefore, the answer is "x ge 0 for all x".

For the third question, we can use the ratio test to find that the limit of xn/n! as n goes to infinity is zero for all values of x. Therefore, the answer is "lim n rightarrow infinity xn/n! = 0 for all values of x".

Learn more about recursive formula here: brainly.com/question/31960996

#SPJ11

Find the general solution of the differential equation dy/dt = 3t2/8y. Choose the correct answer below.
a. y = ±√t^3/4 + C
b. y = 4t^3 + C
c. y = ±√4t^3+C
d. y = t^3/4+C

Answers

Thus,  the general solution of the given differential equation dy/dt = 3t^2/8y is y = ±√(4t^3+C).

To find the general solution of the given differential equation dy/dt = 3t^2/8y, we can use separation of variables.

First, rewrite the equation as: (dy/y) = (3t^2/8)dt.
Now, integrate both sides of the equation:
∫(1/y) dy = ∫(3t^2/8) dt.

After integration, we get:
ln|y| = (t^3/8) + C1,
where C1 is the constant of integration.

Now, exponentiate both sides to remove the natural logarithm:
y = e^((t^3/8) + C1).

We can rewrite the constant as follows:
y = e^(t^3/8) * e^C1.

Let C = e^C1, which is also a constant. So,
y = Ce^(t^3/8).

Comparing with the given options, none of them exactly matches our solution. However, option c is the closest to the correct form.

To match the given options, we can rewrite our solution as:
y = ±√(C*4t^3).

This is similar to option c, which is:
y = ±√(4t^3+C).

Note that the given options may not perfectly represent the actual general solution. In this case, the closest answer is option c.

Know more about the differential equation

https://brainly.com/question/1164377

#SPJ11

When the windA) is less than 10 knots.B) at the altitude is within 1,500 feet of the station elevation.C) is less than 5 knots.

Answers

When the wind is less than 10 knots and at an altitude within 1,500 feet of the station elevation, it is considered a light wind condition. This means that the wind speed is relatively low and can have a minimal impact on aircraft operations.

However, pilots still need to take into account the direction of the wind and any gusts or turbulence that may be present. When the wind is less than 5 knots, it is considered a calm wind condition. This type of wind condition can make it difficult for pilots to maintain the aircraft's direction and speed, especially during takeoff and landing. In such cases, pilots may need to use different techniques and procedures to ensure the safety of the aircraft and passengers. Overall, it is important for pilots to pay close attention to wind conditions and make adjustments accordingly to ensure safe and successful flights.

When the wind is less than 10 knots (A), it typically has a minimal impact on activities such as aviation or sailing. When the wind at altitude is within 1,500 feet of the station elevation (B), it means that the wind speed and direction measured at ground level are similar to those at a higher altitude. Lastly, when the wind is less than 5 knots (C), it is considered very light and usually does not have a significant effect on outdoor activities. In summary, light wind conditions can make certain activities easier, while having minimal impact on others.

To know more about Elevation visit :

https://brainly.com/question/31548519

#SPJ11

Other Questions
restorative justice circles include more participants than family group conferences because they ______. 7.13 CH7 LAB: Convert to binary - functionsWrite a program that takes as input a positive integer, and outputs a string of 1's and 0's representing the integer in binary. For an integer x, the algorithm is:As long as x is greater than 0Output x % 2 (remainder is either 0 or 1)x = x / 2Note: The above algorithm outputs the 0's and 1's in reverse order. You will need to write a second function to reverse the string.If the input is 6, the output is 110.Your program must define and call two functions string IntegerToBinary(int num1) and string ReverseString(string userString). The function IntegerToBinary should return a string of 1's and 0's representing the integer in binary (in reverse). The function ReverseString should return a string representing the input string in reverse.#include using namespace std;/* Define your function here */int main() {/* Type your code here. Your code must call the function. */return 0;} Write a Haskell script called HelloWorld.hs that prints "Hello World!" in the following ways:1. Use one ptrStrLn. Recall: putStrLn :: String -> 10() writes a string and moves to a new line.2. Uses the do function, putStr, and putChar, with the two strings: "Hello" and "World!". Recall: putStr:: String -> 10 () writes a string without moving to a new line, and putChar:: Char -> IO () writes a single character to the screen. To regulate natural monopolies, the governments can choose amongst the following options: Select all that apply A. Set the price to equal Marginal Cost OB. Set the price to equal total cost C. Break the monopolies into several smaller companies OD. Set the price to equal Average total cost An MEG study of professional musicians listening to pure tones showed that professional musicians had ____. suppose the galvanic cell sketched below is powered by the following reaction: mn (s) pdcl2 aq when a corporate manager makes an honest error in judgment, the business judgment rule directs that the manager will: roles are clearly defined for both the prosecution and the defense because in the united states we have what type of legal system? Absorbing state probabilities are the same as ___a. steady-state probabilities. b. transition probabilities. c. fundamental probabilities. d. none of these are correct. What is a "hot" situation? (select all that apply) a situation with high levels of emotion a situation in which peer pressure is involved a situation in which no one is paying attention a situation in which social status is at stake Let Y~Exp(). Given that Y -y, let X ~ Poisson(y). Find the mean and variance of X What is 502. 07 + 1. 4?502. 084502. 21503. 47516. 07 Use the first derivative test to determine the local extrema, if any; for the function f(x) = 3x4 6x2 + 7. OA local max atx= 0 and local min atx= and x = local min at x= 0 and local max atx= and x = locab max atx= and local min atx= 0 and x = locab max atx= and local min at x= 0' A 45$ pair of rain boots were on sale for 38. 25 what percent was saved modern perspectives have defined democray as a competitive political system TRUE/FALSE physical security of an organizations it resources is not an important element in preventing intrusion to an internal lan.True or False Your gym teacher uses traffic cones to create part of an obstaclecourse.The radius of the traffic cone is 8.2 inches and the volume of thetraffic cone is 2442.112 cubic inches.What is the height of the traffic cone?Use the given information to complete the worksheet. Use3.14 as an approximation for TT.C Revenue for a full-service funeral. Refer to the National Funeral Directors Association study of the average fee charged for a full-service funeral, Exercise 6.30 (p. 335). Recall that a test was conducted to determine if the true mean fee charged exceeds $6,500. The data (saved in the FUNERAL file) for the sample of 36 funeral homes were analyzed using Excel/DDXL. The resulting printout of the test of hypothesis is shown below. a. Locate the p-value for this upper-tailed test of hypothesis. b. Use the p-value to make a decision regarding the null hypothesis tested. Does the decision agree with your decision in Exercise 6.30? Given that y = 12 cm and = 35, work out x rounded to 1 DP 1. Which month receives the most precipitation in Alexandria?2. Which month has a record low of 36 degrees Fahrenheit? 3. Which months have an average high of 47 degrees Fahrenheit? 4. What is the difference in degrees Fahrenheit between the record high and record low for the month of October?