The motor ___________ currents listed in NEC Tables 430.247 through 430.250 shall be used to determine the ampacity of motor circuit conductors and short-circuit and ground-fault protection.

F = ma is the formula of Newton's Second Law of Motion. Newton's Second Law of Motion is described as Force is equal to the rate of change of momentum. For a constant mass, force equals mass duration acceleration.

Newton's Second Law of Motion F=ma is very significant because it indicates the relationship between forces and motion. It permits you to calculate the acceleration (and therefore velocity and position) of an object with known forces. This is extremely helpful for scientists, engineers, inventors, etc.

Therefore : F is directly proportional to m×a. This relation F is directly proportional to m×a can be turned into an equation by placing in a constant k.

To learn more about Newton's Second Law , refer

https://brainly.com/question/25545050

#SPJ9

A firm current ratio is 1. 0 and its quick ratio is 1. 0. If current liabilities are 12300 then its inventories will be 12300

Inventory is the accounting of items, component parts and raw materials that a company either uses in production or sells

The quick and current ratios are liquidity ratios that help investors and analysts gauge a company's ability to meet its short-term obligations. The current ratio divides current assets by current liabilities. The quick ratio only considers highly-liquid assets or cash equivalents as part of current assets.

current ratio = current assets / current liabilities

current assets = current ratio  * current liabilities

                        = 1 * 12300 = 12300

since , inventory is a current asset for accounting purpose , hence inventories will be 12300

To learn more about current ratios

https://brainly.com/question/19579866?referrer=searchResults

#SPJ4

The most accurate place to conduct a weight check is at safety-stop death, at the end of the dive.

Why is a weight check important in diving?

A weight check before diving helps an individual decide on the right amount of weight needed for each scuba dive.

To do a weight check one must float upright on the surface, head placed above water. The individual then needs to ­release some air from their Buoyancy compensator as they take a deep breath from their regulator.

Now if the individual sinks rapidly below the ­surface, they are overweight and if their head stays above the water surface, then they are underweight. Thus, when an individual sinks up to the mask ­level, then the weight is just right.

Therefore, the most accurate place to conduct a weight check is at safety-stop depth, at the end of the dive.

Learn more about diving here:

https://brainly.com/question/24418935

#SPJ4

Answer:

false

Explanation:

The wavelength of a photon of electromagnetic radiation with a frequency of 151.7 Mhz is 1.978 meter

According to the question

The frequency of a photon of electromagnetic radiation = 151.7 Mhz

By using the Formula of wavelength and frequency

λ = C/f

Where,

λ (Lambda) = Wavelength in meters

C = Speed of Light (c = 3x10⁸ m/s)

f = Frequency

Now, the wavelength of a photon of electromagnetic radiation with a frequency of 151.7 Mhz is  

1 Mhz = 1000000 Hz

151.7 Mhz = 151.7 * 10⁶ Hz

λ = C/f  

Substituting the value of C and f  

  λ =  [tex]\frac{3*10^{8} }{151.7 * 10^{6} }[/tex]

  λ = 1.978 meter

Hence,  the wavelength of a photon of electromagnetic radiation with a frequency of 151.7 Mhz is 1.978 meter

To know more about  wavelength and frequency here:

https://brainly.com/question/18651058

#SPJ4

Head to tail rule helps us to find the resultant of forces because in this rule we join many vectors with each other forming resultant vector.

The joining of tail of the first vector with the head of the second vector represents the resultant vector whereas the direction of the resultant vector is from the tail of the first vector towards the head of the second.

So we can conclude that Head to tail rule helps us to find the resultant of forces because in this rule we join many vectors with each other forming resultant vector.

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

It would take 531 minutes for a single electron in the electron sea to drift from one end to the other end of a wire 35 cm long.

What is electric current?

A rate of electric charge flowing past a place or region is called an electric current. A net passage of electric charge through a region creates an electric current.

Here,

ρ is the density of electrons = 8.4×10²⁸ kg/m³

i is the electric current =9.08×10¹⁸ electrons/sec

d is the diameter of the wire =3.6 mm = 0.0036 m

r is radius, r = d/2, r = 1.8 mm = 0.0018 m

l is the length of wire = 34 cm = 0.34 m

v is The volume of the wire

We know that Volume:

V = π r^2* l

V = (3.14* 0.0018^2) 0.34

V = 3.45* 10^-6 m³

Now,

no of electrons= ρ × V

n =  8.4×10²⁸ * 3.45* 10^-6

n = 2.898 * 10^ 23

The time required for the drifting electron is equal to the ratio of the number of electrons to the electric current flows.

T = n/i

T = 2.898 * 10^ 23 / 9.08×10¹⁸

T = 0.3191 * 10^5 s

T = 531 minutes

Hence,

It would take 531 minutes for a single electron in the electron sea to drift from one end to the other end of a wire 35 cm long.

Learn more about electric charge here:

https://brainly.com/question/15180042

#SPJ4

In addition to ozone, the four other greenhouse gases or groups of greenhouse gases are included in nearly all the climate models are Carbon dioxide, water vapor, and methane, nitrous oxide.

Carbon dioxide, absorbs energy at a variety of wavelengths, a range that overlaps with that of infrared energy. As CO2 soaks up this infrared energy, it vibrates and re-emits the infrared energy back in all directions. About half of that energy goes out into space, and about half of it returns to Earth as heat, contributing to the ‘greenhouse effect.’

As methane is emitted into the air, it reacts in several ways. It reacts and  after oxidization methane forms water vapor and carbon dioxide. So, not only does methane contribute to global warming directly but also, indirectly through the release of carbon dioxide.

Nitrous oxide enhances the greenhouse effect by capturing reradiated infrared radiation from the Earth’s surface and subsequently warming the troposphere . It is chemically inert in the troposphere and stays in the troposphere for about 120 years before moving into the stratosphere where it ultimately leads to destruction of stratospheric ozone.

Water vapor does absorb longwave radiation and radiates it back to the surface, thus contributing to warming.

To learn more about greenhouse gases here

https://brainly.com/question/14131369?referrer=searchResults

#SPJ4

Answer: A small mailbag is released from a helicopter that is descending steadily at 1.53 m/s. Then,

a) after 4s, the speed of the mailbox will be, 40.73m/s downwards.

b)78.4m downwards.

c) v=37.67m/s downward. and d=78.4m downward.

Explanation: To find the answer, we need to know more about the equations of uniformly accelerated motion.

                                [tex]v=u+at\\S=ut+\frac{1}{2}at^2\\ v^2-u^2=2aS\\S=\frac{v+u}{2}t[/tex]

            [tex]v=u+gt=-1.53-(9.8*4)=-40.73 m/s^2[/tex]

           [tex]d_1=ut+\frac{1}{2}gt^2=(-1.53*4)+\frac{-9.8*16}{2} =-84.52 m\\d_2=vt=-40.73*4=-162.92 m\\d=-162,92+84.52=-78.4m[/tex]

                 [tex]v=u+gt=1.53-(9.8*4)=-37.67 m/s[/tex]

                 [tex]d_1=ut+\frac{1}{2}gt^2=(1.53*4)+\frac{-9.8*16}{2} =-72.28 m\\ d_2=vt=-37.67*4=-150.68 m\\d=-150.68+72.28=-78.4 m[/tex]

Thus, we can conclude that, the answers to the question are, a) after 4s, the speed of the mailbox will be, 40.73m/s downwards.

b)78.4m downwards.

c) v=37.67m/s downward. and d=78.4m downward.

Learn more about the equation of uniformly accelerated motion here:

https://brainly.com/question/28044927

#SPJ4

Answer:

initial velocity is the constant in horizontal projectile

The form of precipitation which may occur from this type of clouds is cumulus clouds.

Precipitation cloud is the cloud from which rain falls or looks likely to fall.

Below are some types of precipitation:

Precipitation refers to any or all of the forms of water particles, whether liquid or solid, that fall from the atmosphere such as; rain, hail, snow or sleet).

It is a major class of hydrometeor, but it is distinguished from cloud, fog, dew, rime, frost, etc., in that it must fall. It is distinguished from cloud and virga in that it must reach the ground.

Cloud refers to visible mass of water droplets suspended in the air.

In conclusion, the form of precipitation which may occur from this type of clouds is cumulus clouds

Learn more about precipitation:

https://brainly.com/question/1783904

#SPJ1

The net electric field at point D is determined as 3.95 x 10⁷ N/C.

E = kq/r²

where;

E(AD) = (9 x 10⁹ x 6 x 10⁻⁶)/(0.05²)

E(AD) = 2.16 x 10⁷ i N/C

E = kq/r²

where;

r² = 5²  + 5²

r² = 50

r = √50

r = 7.07 cm

E(BD) = (9 x 10⁹ x 5 x 10⁻⁶)/(0.0707²)

E(BD) = 9 x 10⁶ N/C

in x - direction = 9 x 10⁶ N/C x cos(45) = 6.36 x 10⁶ i  N/C

in y - direction = 9 x 10⁶ N/C x sin(45) = 6.36 x 10⁶j  N/C

E = kq/r²

where;

E(CD) = (9 x 10⁹ x 6 x 10⁻⁶)/(0.05²)

E(CD) = 2.16 x 10⁷ j N/C

Ei = 2.16 x 10⁷ i N/C  + 6.36 x 10⁶ i  N/C

Ei = 2.796 x 10⁷ i N/C

Ej = 2.16 x 10⁷ j N/C  + 6.36 x 10⁶j  N/C

Ej = 2.796 x 10⁷ j N/C

E = √Ei² + Ej²

E = √[(2.796 x 10⁷)² + (2.796 x 10⁷)²]

E = 3.95 x 10⁷ N/C

Thus, the net electric field at point D is determined as 3.95 x 10⁷ N/C.

Learn more about electric field here: https://brainly.com/question/14372859

#SPJ1

Answer:

Error

Explanation:

Speed= Distance / Time

Speed = 0.1

Answer:  When you cannot stop safely at a yellow traffic light before entering an intersection, enter the intersection carefully and continue across.

Explanation: To find the correct answer, we need to know more about the traffic signal rules.

Thus, we can conclude that, the option C is correct.

Learn more about the traffic signal rules here:

https://brainly.com/question/28044804

#SPJ4

Answer: A satellite with a mass of 110 kg and a kinetic energy of 3.08×10^9 J must be moving at a speed of 7483 m/s.

Explanation: To find the answer we need to know about the kinetic energy of a body.

                                   [tex]KE=\frac{1}{2}mv^2[/tex]

                                   [tex]m=110kg\\KE=3.08*10^9J\\[/tex]

                               [tex]v=\sqrt{\frac{2KE}{m} } =\sqrt{\frac{2*3.08*10^9}{110} } =7.483*10^3 m/s[/tex]

Thus, we can conclude that, the velocity of the satellite will be 7438m/s.

Learn more about Kinetic energy here:

https://brainly.com/question/28105739

#SPJ4

In order to move at a speed of 7483 m/s, a satellite with a mass of 110 kg and a kinetic energy of 3.08× 10^-9 J must be travelling.

Understanding a body's kinetic energy is necessary in order to determine the solution.

                         [tex]KE=\frac{1}{2}mV^2[/tex]

               [tex]m=110kg\\KE=3.08*10^9J[/tex]

                        [tex]V=\sqrt{\frac{2KE}{m} }=7.48km/s[/tex]

Thus, we can infer that the satellite will move at a speed of 7438 m/s.

Learn more about the kinetic energy here:

https://brainly.com/question/28105739

#SPJ1

Answer:

Approximately [tex]\$ 3.02[/tex].

Explanation:

Note that the electric rate in this question is in the unit dollar-per-[tex]{\rm kWh}[/tex], where [tex]1\; {\rm kWh}[/tex] is the energy to run an appliance of power [tex]1\; {\rm kW}[/tex] for an hour.

Number of minutes for which the air conditioner is running in that day: [tex]15 \times 24 = 360\; \text{minute}[/tex]. Apply unit conversion and ensure that this time is measured in hours (same as the unit of the electric rate.)

[tex]\begin{aligned} \text{time} &= 360\; \text{minute} \times \frac{1\; \text{hour}}{60\; \text{minute}} = 6\; \text{hour} \end{aligned}[/tex].

The power of this air conditioner is:

[tex]\begin{aligned} \text{power} &= \text{voltage} \times \text{current} \\ &= 240\; {\rm V} \times 21\; {\rm A} \\ &= 5040\; {\rm W} \\ &= 5.04\; {\rm kW} \end{aligned}[/tex].

Thus, the energy that this air conditioner would consume would be:

[tex]\begin{aligned}\text{energy} &= \text{power} \times \text{time} \\ &= 5.04\; {\rm kW} \times 6\; \text{hour} \\ &= 30.24\; {\rm kWh} \end{aligned}[/tex].

At a rate of [tex]0.1[/tex] dollar-per-[tex]{\rm kWh}[/tex], the cost of that much energy would be approximately [tex]3.02[/tex] dollars (rounded to the nearest cent.)

Tuning forks with a frequency of 500 to 1000 hz are most commonly used to measure: hearing loss

A person is said to have hearing loss if they are not able to hear as well as someone with normal hearing, meaning hearing thresholds of 20 dB or better in both ears. It can be mild, moderate, moderately severe, severe or profound, and can affect one or both ears.

High-pitched tuning fork with frequency of 500 to 1000 hertz (Hz) should be used to estimate hearing loss in range of normal speech (300 to 3000 Hz).

The 512-Hz Rinne tuning fork test could be very effective at detecting conductive hearing losses when performed by an experienced tester and when masking was used . Tuning forks  are used to carry Rinne and Weber tests. These tests provide a quick easy method of determining whether a hearing loss is situated in the middle ear or inner ear

To learn more about hearing loss here

https://brainly.com/question/18548045?referrer=searchResults

#SPJ4

when they meet the 40-kg boy will have moved a distance of 6 m.

Friction is the force that resists motion when the surface of one object comes in contact with the surface of another.

It is the average position of all the parts of the system, weighted according to their masses.

here,

masses of the boys

M=40 kg,

m=60 kg

x1 = 10 m

The displacement of the 40 kg boy is calculated from the principle of center mass.

XM = ( mx1 + Mx2) / ( m + M )

X(40) = (60 x 10 +  40 x 0) / (40 kg + 60 kg)

X(40) = (600)/(100)

X(40) = 6 m

X(60) = (60 x 0 + 40 x 10 m) / (40 kg + 60 kg)

X(60) = (400)/(100)

X(60) = 4 m

Thus,

when they meet the 40-kg boy will have moved a distance of 6 m.

Learn more about center of mass here:

https://brainly.com/question/8662931

#SPJ4

The acceleration of the person is 4.108 m/s^2.

What is acceleration?

The acceleration is the rate of change in the velocity in a unit of time.

Angular velocity: The change in angular displacement in a unit of time is called angular velocity.

Tangential velocity: The tangential velocity can be defined as the velocity of an object which is perpendicular to the radius in the rotational motion.

The relation between angular velocity ω, tangential velocity v, and radius r from the axis when the radius is perpendicular to the tangential velocity is,

v=ω*r

Given r=15 m, and ω=5 turns/minutes, substitute these values in the above formula.

Note: 1 turn/minute = 2π/60 rad/s.

v=(5 turns/minutes)*15 m

v=(5*2π/60 rad/s)* 15 m

v=7.85 m/s

Since the motion is circular, and the person is at the lowest point of the wheel, so the acceleration due to gravity will have no effect as it is perpendicular to tangential velocity here. The acceleration a for rotational motion is given by,

a=v^2/r

Substitute v=7.85 m/s, and r=15 m in this equation and solve it.

a=(2.094)^2/(15)

a=4.108 m/s^2

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ4

Option b) Stomach is most likely to have the most muscles.

There are five main muscles in stomach pyramidalis, rectus abdominus, external obliques, internal obliques, and transversus abdominis.

Muscles circulate frame parts by contracting after which relaxing. muscular tissues can pull bones, however, they cannot push them to return to their unique role. so they paintings in pairs of flexors and extensors. The flexor contracts to bend a limb at a joint.

The muscle groups that circulate our frame elements are called skeletal muscles, and they're a form of striated muscle. We will actively manipulate those with our brains. another sort of striated muscle is those that maintain our hearts pumping, which we are not able to actively control.

Muscles pull at the joints, allowing us to move. a couple of muscular tissues are used for any sort of motion of a bone. Although we are sitting flawlessly nevertheless, muscle tissues at some point in the frame are constantly shifting.

Learn more about Muscles here: https://brainly.com/question/1283837

#SPJ1

The distance traveled by the sprinter in meters is determined as 1.88 m.

The acceleration of the sprinter is the rate of change of velocity of the sprinter with time.

The acceleration of the sprinter is calculated as follows;

Apply Newton's second law of motion as follows;

F = ma

a = F/m

where;

a = 693 N / 64 kg

a = 10.83 m/s²

The distance traveled by the sprinter is calculated as follows;

s = ut + ¹/₂at²

where;

s = ¹/₂at²

where;

s = (0.5)(10.83)(0.59²)

s = 1.88 m

Thus, the distance traveled by the sprinter in meters is determined as 1.88 m.

Learn more about distance here: https://brainly.com/question/2854969

#SPJ1

The pressure in the hose as the speed of water changes from 2.05 m/s to 31.4 m/s as it goes through the nozzle is 5.92 × 10⁵ N/m².

Given:

The flow of water through the hose initially, v₁ = 2.05 m/s

The flow of water through the hose initially, v₂ = 31.4 m/s

Calculation:

From Bernoulli's equation we have:

P₁ + 1/2 ρv₁² + ρgh₁ = P₂ + 1/2 ρv₂² + ρgh₂

where P₁ is atmospheric pressure

           P₂ is the pressure in the hose

           ρ is the density of the fluid

           h₁ is the initial height

           h₂ is the final height

           v₁ is the initial velocity of the fluid

           v₂ is the final velocity of the fluid  and

           g is the acceleration due to gravity

Re-arranging the above equation we get:

P₂ = P₁ + 1/2 ρ(v₁²-v₂²) + ρg (h₁-h₂)

Applying values in the above equation we get:

P₂ = P₁ + 1/2 ρ(v₁²-v₂²) + ρg (0)

    = (1.01 × 10⁵ Pa)+ 1/2 (10³ g/m³) [(31.4m/s)²-(2.05 m/s)²]

    = (1.01 × 10⁵ Pa)+ 1/2 (10³ g/m³) [981.7575]

    = (1.01 × 10⁵ Pa)+ (4.91 × 10⁵ Pa)

    = 5.92 × 10⁵ Pa

    = 5.92 × 10⁵ N/m²

Therefore, the pressure in the hose is 5.92 × 10⁵ N/m².

Learn more about Bernoulli's equation here:

https://brainly.com/question/9506577

#SPJ4

True

In place of photographic plates or films, charge coupled devices, or CCDs, are sensitive photon detectors that can be employed in telescopes to create images. CCDs were created in the late 1960s and are now found in various devices, including digital cameras and photocopiers.

CCDs are more light-efficient, catch a greater proportion of incoming photons, can store and transfer digital data, and don't require development like film does. They respond linearly and capture up to 80% of the light that strikes them.

I understand the question you are looking for is this:

One of the primary advantages of CCDs over photographic plates is the former's high efficiency in detecting light. True or false.

Learn more about CCDs here:

https://brainly.com/question/3348477

#SPJ4

The reading of the scale after 3.6 seconds is 23.79 N.

v = √2gh

v = √(2 x 9.8 x 2.2)

v = 6.57 m/s

mv/t = F = 0.4 x 6.57 = 2.628 N

Wb = 0.72 x 9.8

Wb = 7.056 N

Wa = (RT)g

Wa = (0.4 x 3.6) x 9.8

Wa = 14.11 N

R = Wa + Wb + F

R = 14.11 N  +  7.056 N  +  2.628 N

R = 23.79 N

Thus, the reading of the scale after 3.6 seconds is 23.79 N.

Learn more about weight here: https://brainly.com/question/2337612

#SPJ1

The new moment of inertia of the gymnast is 9kgm^2.

To find the answer, we need to know about the conservation of angular momentum.

                      I₁×w₁= I₂×w₂

                      I₂= I₁×w₁/w₂

                         = (6×12)/8

                         = 9kgm^2

Thus, we can conclude that the new moment of inertia of the gymnast is 9kgm^2.

Learn more about the moment of inertia here:

brainly.com/question/14460640

#SPJ4

option (a)i.e, It is magnetic when the atoms in a magnetic material are lined up.

Magnetic fields can be represented visually using magnetic field lines. In each case, they specify the direction of the magnetic force acting on a north monopole. The lines' density reveals how large the field is. For example, the magnetic field is more intense and dense near a magnet's poles.

The spin and orbital momentum of an atom's electrons produce magnetism. The term "magnetic anisotropy" refers to how an atom's magnetic characteristics change depending on how the orbits of its electrons are oriented in relation to the composition of a substance. Additionally, it gives magnetization directionality and stability

Each atom creates a tiny magnetic field because the orbiting electrons are tiny moving charges. The direction or orientation of these magnetic fields is referred to as the atom's magnetic moment. In a nutshell, an object's atoms behave like a number of small magnets.

To know more about Magnetic fields refer to:  https://brainly.com/question/23096032

#SPJ1

Sport-type motorcycles typically feature a higher than average power-to-weight ratio.

What is scrambler motorcycle?

Learn more about Scrambler motorbikes

brainly.com/question/24915434

#SPJ4

Answer: The end point of a spring oscillates with a period of 2.0 s when a block with mass m is attached to it. When this mass is increased by 2.0 kg, the period is found to be 3.0 s.  Then the mass m is 0.625kg.

Explanation: To find the answer, we need to know more about the simple harmonic motion.

                                          [tex]T=2\pi \sqrt{\frac{m}{k} }[/tex]

               [tex]T_1=2s\\m_1=m\\m_2=m+2kg\\T_2=3s[/tex]

              [tex]T_1=2\pi \sqrt{\frac{m}{k} } \\T_2=2\pi \sqrt{\frac{m+2}{k} } \\\frac{T_1}{T_2} =\sqrt{\frac{m}{m+2} }\\\frac{2}{3} =\sqrt{\frac{m}{m+2} }\\\\[/tex]

               [tex]m=\frac{5}{8} =0.625kg[/tex]

Thus, we can conclude that, the mass m will be 0.625kg.

Learn more about simple harmonic motion here:

https://brainly.com/question/28045110

#SPJ4

She should use shorter focal length to fit the entire landscape which she is trying to photograph into her picture.

What is focal length?

The focal length is a measure of how strongly the system converges or diverges light.

A positive focal length indicates that a system converges light, while a negative focal length indicates that the system diverges light.

For a standard rectilinear lens,

FOV = 2 arctan (x/2f)

FOV ∝ 1 / f

where x is the diagonal of the film.

Focal length (f) and field of view (FOV) of a lens are inversely proportional.

From the equation we can say that,

A shorter focal length gives you a wide angle of view which allows more view to fit in the frame.

Hence,

She should use shorter focal length to fit the entire landscape which she is trying to photograph into her picture.

Learn more about focal length here

https://brainly.com/question/13885819

#SPJ4