The nebular theory of the formation of the solar system successfully predicts all but one of the following. Which one doe the theory not predict.
- The equal number of terrestrial and jovian planets (with the exception of Pluto) Does predict
- The craters on the moon - planets orbit around the Sun in nearly circular orbits in a flattened disk. the compositional differences between the terrestrial and jovian planets. - the presence of asteroids and comets.

Focusing a camera changes the distance between the lens and the film. And the eye focus by changing the distance between the lens and the retina is true as, the eye does focus by changing the distance between the lens and the retina.

When we focus on an object, the curvature of the lens in our eye changes. This causes the light rays from the object to converge and focus on the retina, located at the back of the eye.

In order to focus on objects at different distances, our eye's lens must adjust its shape by changing its curvature, which changes the distance between the lens and the retina. This process is called accommodation.

The process of focusing the eye is similar to the process of focusing a camera. In a camera, changing the distance between the lens and the film allows for the object to be in focus. Similarly, in the eye, changing the distance between the lens and the retina allows for objects to be in focus.

Therefore, the eye focuses by changing the distance between the lens and the retina.

Read more about the retina:

https://brainly.com/question/28098895

#SPJ11

Given,F1 = 20 kN Reaction at Pin A is represented as FAB, and the reaction at Pin D is represented as FDC. Let the angle between AB and the horizontal be θ.

Let the angle between CD and the horizontal be φ.Resolution of Force F1:Let the x-component of the reaction at Pin A be FABx and the y-component be FABy. Thus, from the force balance equation, we get,∑F_x = FABx + FDCx = 0⇒ FABx = -FDCxAlso, ∑F_y = FABy + FDCy = F1 = 20kNAs the beam is in equilibrium,∑M_{D} = FABy . AD - FDCy . DC = 0This is the moment balance equation of the beam. We can solve for either FAB or FDC using these two equations, as the magnitude of the forces will be the same.Resolution of forces at Pin A:For forces at Pin A, we use scalar notation.∑F_x = F_{ABx} = 0As there is no external force in the x direction, FABx is 0.∑F_y = F_{ABy} - F1 = 0Hence, the y-component of the reaction at Pin A is FABy = F1 = 20kN.Resolution of forces at Pin D:For forces at Pin D, we use scalar notation.∑F_x = F_{DCx} = 0As there is no external force in the x direction, FDCx is 0.∑F_y = F_{DCy} - F1 = 0Hence, the y-component of the reaction at Pin D is FDCy = F1 = 20kN.Thus, the x-component of the reaction at Pin A and Pin D is 0, and the y-component of the reaction at Pin A and Pin D is 20 kN.

for more such questions on angle .

https://brainly.com/question/29506154

#SPJ11

a. The ammeter reading should be I = V/R = 27V/9ohm = 3A.

b. The voltmeter reading should be 27V, since it is connected in parallel with the battery and measures the voltage across it.

c. The power delivered to the resistor can be calculated using P = VI = (I^2)*R = (3A)^2 * 9ohm = 27W.

d. The energy delivered to the resistor per hour can be calculated using E = Pt = 27W * 1 hour = 27 Wh.

What is an ammeter?

An ammeter is a measuring instrument used to measure electric current flowing through a circuit. It is typically connected in series with the circuit so that all the current flowing in the circuit passes through the ammeter. Ammeters can be analog or digital, and they are designed to measure different ranges of current. They are an essential tool for diagnosing and troubleshooting electrical problems, and they are commonly used in industrial, commercial, and residential applications.

What is a voltmeter?

A voltmeter is a measuring instrument used to measure the electric potential difference (voltage) between two points in an electrical circuit. It is typically connected in parallel with the circuit component or circuit section whose voltage is to be measured. When a voltage is present in the circuit, the voltmeter displays the measured value in volts, which can help to determine the performance or condition of the circuit.

To know more about ammeter, visit:

https://brainly.com/question/30849022

#SPJ1

a. The ammeter reading should be I = V/R = 27V/9ohm = 3A.

b. The voltmeter reading should be 27V, since it is connected in parallel with the battery and measures the voltage across it.

c. The power delivered to the resistor can be calculated using P = VI = (I^2)*R = (3A)^2 * 9ohm = 27W.

d. The energy delivered to the resistor per hour can be calculated using E = Pt = 27W * 1 hour = 27 Wh.

An ammeter is a measuring device used to determine the amount of electric current passing through a circuit. It is usually wired in series with the circuit so that all current passing through it goes through the ammeter. Ammeters can be analogue or digital, and they are used to detect various current levels. They are an indispensable instrument for diagnosing and troubleshooting electrical issues, and they are widely used in industrial, business, and domestic settings.

A voltmeter is a measuring device used to determine the difference in electric potential (voltage) between two locations in an electrical circuit. It is usually linked in parallel with the circuit component or portion whose voltage is to be measured. When a voltage is present in the circuit, the voltmeter shows the measured value in volts, which can aid in determining the circuit's performance or state.

To know more about ammeter, visit:

brainly.com/question/30849022

#SPJ1

Answer:

[tex]\boxed{5427N}[/tex]

Explanation:

We use the well-known equation:

[tex]F=m\cdot a[/tex]

where:

so, we can rewrite the equation like this:

[tex]F= (810kg)(6.7m/s^2)\\F=5427N[/tex]

So, taking into account the statement as seen in the image, your answer must be correct.

[tex]\text{-B$\mathfrak{randon}$VN}[/tex]

The overall resistance of your room's electric circuit will decrease when you turn on an additional 100-W bulb.  An ideal ammeter would have zero resistance is because it is designed to measure current. An ideal voltmeter would have infinite resistance because it is designed to measure voltage.

When you turn on an additional 100-W bulb, the overall resistance of your room's electric circuit decreases because adding more bulbs increases the total current flowing through the circuit. The reason an ideal ammeter would have zero resistance is because it is designed to measure current, and any resistance in the ammeter itself would interfere with the measurement. An ideal voltmeter, on the other hand, would have infinite resistance because it is designed to measure voltage, and having a high resistance would prevent any current from flowing through the voltmeter and interfering with the measurement.

Both of these ideal instruments are hypothetical, but they help us understand the principles behind electrical measurements. For instance, a real ammeter has a small but measurable resistance, which means that some current is diverted from the circuit when it is connected, but this can be minimized by using a low-resistance shunt. Similarly, a real voltmeter has a high resistance, but not infinite, which means that some current will flow through it, but this can be minimized by using a high-resistance input circuit.

Learn more about Resistance:

https://brainly.com/question/24119414

#SPJ11

We cannot determine the value of interference with the given information.

The interference can be determined using the following formula:

interference = (observed double crossover rate - expected double crossover rate) ÷ (1 - expected double crossover rate).

The expected double crossover rate can be calculated using the formula:

expected double crossover rate = (distance AB × distance BC) ÷ total distance (AB + BC + AC).

Given:

Distance between A and B is 10mu;

Distance between B and C is 15mu;

Observed double crossover rate is 0.25%.

Therefore,

Distance AB = 10mu;

Distance BC = 15mu;

Total distance = AB + BC + AC

Expected double crossover rate = (10 × 15) ÷ (10 + 15 + AC)

expected double crossover rate = 150 ÷ (AC + 25)

The observed double crossover rate is 0.25%.

Therefore, the observed double crossover rate = 0.25% = 0.0025.

Interference = (observed double crossover rate - expected double crossover rate) ÷ (1 - expected double crossover rate)=

[0.0025 - (150 / (AC + 25))] ÷ [1 - (150 / (AC + 25))]

what is the interference if: distance between a and b is 10mu distance between b and c is 15mu observed double crossover rate is: 0.25%

To learn more about interference:https://brainly.com/question/16098226

#SPJ11

The magnitude of the magnetic field within the coaxial cable between the wire and the shell; that is, in the region r is 0. This can be calculated through Ampere's law.

The magnitude of the magnetic field between the wire and the shell (i.e. in the region r) can be calculated using Ampere's Law. This states that the integral of the magnetic field around any closed path is equal to the magnitude of the current passing through that path. Since the current I is flowing in the +x direction through the wire, and in the -x direction around the conducting shell, the total current passing through any path (r) in the radial direction will be 0.

Outside the coaxial cable (i.e. in the region r>R), the magnitude of the magnetic field can be calculated through Ampere's Law. Since the current I is flowing in the +x direction through the wire, and in the -x direction around the conducting shell, the total current passing through any path (r>R) in the radial direction will be I. Hence, the magnitude of the magnetic field in the region r>R is (μ/2π) × I/R, where μ is the permeability of free space.

Learn more about Ampere's law here:

https://brainly.com/question/29831953
#SPJ11

A species-specific, genetically programmed pattern of behavior is known as an instinct. It includes activities like migration, hunting, and grooming and is essential for an animal's survival; it is not learned but inherited.

A species-specific reaction pattern that is intrinsic and genetically encoded is known as an instinct. It is an activity or habit that is present from birth or hatching and is not learned but rather inherited. An animal's ability to reproduce and survive depends on these instincts. Depending on the species, instincts may involve activities including migration, nest-building, hunting, and grooming. Animals may compete for resources and adapt to their environments thanks to these behaviors, which are frequently complicated and quite particular. Natural selection is assumed to have led to the evolution of instincts, with creatures with advantageous instincts having a higher chance of surviving and passing on their genes to subsequent generations.

learn more about genetically programmed here:

https://brainly.com/question/15048208

#SPJ4

The speed of sound is found out to be 349.4 ms⁻¹ from the frequency of the seventh resonance heard when the water level is 217.75 cm below the top of the tube.

Frequency of wave:

v = nλ

where, v = speed of sound, n = frequency, λ = wavelength

Speed of sound:

v = frequency n × wavelength λ

Frequency, n = v/λ

Wavelength, λ = v/n

The 7th resonance frequency of the tuning fork is given by:

n = 7 × f

where, f is the frequency of the tuning fork

Speed of sound, v = nλ

Speed of sound, v = 7fλ

Speed of sound, v = 7 × 256 Hz × λ

λ = 1.3671 m

Distance travelled by the sound wave in the water column is L = h + l

where, h = length of the air column and l = length of water column where the resonance was heard.

L = h + l

L = 217.75 cm + 50 cm

L = 267.75 cm = 2.6775 m

Length of the air column, h = L - l

where, l = length of water column where the resonance was heard.

h = 2.6775 m - 0.5 m

h = 2.1775 m

Wavelength of sound wave in air column, λ₁ = 4h

λ₁ = 4 × 2.1775 m

λ₁ = 8.71 m

Frequency of the sound wave in air column is given by:

n = v/λ₁

n = 349.4 ms⁻¹ / 8.71 m

n = 40.112 Hz

The 7th resonance frequency of the tuning fork is given by:

n = 7 × f

40.112 Hz = 7 × f

Frequency of the tuning fork, f = 5.73 Hz.

Learn more about Frequency here:

https://brainly.com/question/14316711

#SPJ11

Answer: Lets say he is traveling that speed per 5 second.

Average Speed= Total Velocity/Time

(10+20)/5

30/5

6

Explanation:

When the 35.0-g bullet moving at 475 m/s strikes the 4.4-kg bag of flour, the momentum of the bullet is transferred to the bag of flour, causing the bag of flour to move and the bag moving when the bullet exits at 91.3 m/s.

We can calculate the velocity of the bag of flour after the collision using conservation of momentum:

Here we have the following data as :

Momentum of bullet before collision = Momentum of bullet and bag after collision

m bullet × v bullet, before = (m bullet + m bag) bag × v bag, after

We can solve for v bag ,after:

v bag ,after = (m bullet × v bullet, before) / (m bullet + m bag)

v bag, after = (35.0 g × 475 m/s) / (35.0 g + 4.4 kg) = 91.3 m/s

Therefore, the bag of flour is moving at 91.3 m/s when the bullet exits.

Read more about mass here:

https://brainly.com/question/1838164

#SPJ11

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.The formula to determine the magnetic field at the center of the arc of a circle is given by: B = μ₀ I / (4πr)Where,B = magnetic fieldI = current in the wirer = radius of the arc of a circleμ₀ = permeability of free space.

Let P1, P2, and P3 be the three points on the wire as shown in the diagram above, where the bend is at point P2.

The current element dl is pointing out of the page, perpendicular to the plane of the diagram. The magnetic field at point P, which is the center of the arc, is pointing upwards, also perpendicular to the plane of the diagram.

Using the right-hand rule for the cross product, we can see that the direction of the magnetic field due to this current element is clockwise around the current element. Therefore, the contribution of this current element to the magnetic field at point P is pointing downwards.

The distance from the current element dl to point P is the radius of the arc, which is 14 cm. Therefore, we can write:

dB = (μ₀/4π) * (I dl / r²)

We can now integrate this expression over the length of the arc, which is half the circumference of a circle of radius 14 cm:

B = 2 * ∫[0,π] dB = 2 * ∫[0,π] (μ₀/4π) * (I dl / r²)

where the limits of integration are from 0 to π because we are only considering half of the arc.

Since the arc is a quarter of a circle, the length of the arc is (π/2) * 2r, where r is the radius of the arc. Therefore, we can write:

dl = (π/2) * 2r * dθ

where dθ is a small angle element. Substituting this into the integral, we get:

B = 2 * ∫[0,π] (μ₀/4π) * (I (π/2) * 2r * dθ / r²)

Simplifying, we get:

B = (μ₀I/4) * ∫[0,π] dθ

Integrating, we get:

B = (μ₀I/4) * [π - 0]

Finally, substituting the values, we get:

B = (4π × 10^-7 T m/A × 32 A/4) * π

B = 1.005 × 10^-5 T

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.

For such more questions on magnetic field

https://brainly.com/question/13689629

#SPJ11

This means that the maximum magnitude of the magnetic force the electron can experience in this situation is 6.17 x 10-14 N.

The maximum magnitude of the magnetic force that an electron can experience when accelerated through 1.65 103 V from rest and entering a uniform 2.80-T magnetic field can be calculated using the equation F=q(v X B), where F is the force, q is the charge of the electron, v is its velocity, and B is the magnetic field.

Using the equation above, we can calculate the maximum magnitude of the magnetic force as F=1.6 x 10-19C(1.65 x 103 m/s x 2.8T)=6.17 x 10-14 N.

for such more questions on  magnetic field

https://brainly.com/question/26257705

#SPJ11

The maximum height (h) of the jump is 12.22 m above the end of the ramp.

The man on the motorcycle plans to make a jump with an initial speed of 33.0 m/s and a final speed of 31.5 m/s. The maximum height (h) of the jump can be calculated using the following equation:

h = (vi2 - vf2) / (2g)

where

Plugging in the given values, we get:

h = (33.02 - 31.52) / (2 x 9.81)
h = 12.22 m

Therefore, the maximum height (h) of the jump is 12.22 m above the end of the ramp.

Learn more about maximum height: brainly.com/question/28060976

#SPJ11

The Periodic Table of Elements served as the inspiration for this scavenger hunt. The exercise consists of two sets of questions, each of which has 28 questions that must be answered using the Periodic Table.

Students are tasked with identifying elements in the first set of questions using information from their attributes, such as the element's position on the periodic table, atomic mass, or quantity of electrons, protons, or neutrons. The objectives of the questions are to familiarise students with the properties of various elements and the structure of the Periodic Table. The second series of questions is comparable to the first, but more difficult because it asks students to identify components using less obvious cues, like their chemical symbol or a chemical formula. In order to succeed in their future studies of chemistry and other related sciences, students will benefit from being more familiar with the structure of the periodic table and the characteristics of various elements.

learn more about Periodic Table here:

https://brainly.com/question/11155928

#SPJ4

Nuclear reactors have three separate water loops instead of just a single one that runs from the water source, through the reactor, then back to the cooling tower because the water running through the reactor is highly radioactive.

A nuclear reactor is a device that controls and maintains a sustained nuclear chain reaction for the purpose of generating heat or power, as well as the materials that make up a nuclear reactor.

The water running through the reactor is highly radioactive, which means that it cannot be released into the atmosphere or allowed to come into touch with humans or the environment. As a result, nuclear reactors are designed with three separate water loops.

In summary, nuclear reactors have three separate water loops instead of a single one that runs from the water source, through the reactor, and back to the cooling tower because the water running through the reactor is highly radioactive.

Learn more about nuclear power: https://brainly.com/question/29472057

#SPJ11

(a)  the work done by the force is -7 N.m

(b) the speed of the particle at r is 3.52 m/s

(c) Since the given force is not a conservative force, we cannot calculate the change in the potential energy of the system.

Work done by this force:

The work done by a force is calculated using the formula W = F.d, Where W is the work done, F is the force, and d is the displacement of the particle.Here, F = (3 i + 5 j) N, and d = r - 0 = ( i - 2 j) m - 0 i.e., d = (1 i - 2 j) m So,

W = F.d= (3 i + 5 j) N. (1 i - 2 j) m= 3 N.m - 10 N.m= -7 N.m

Therefore, the work done by the force is -7 N.m.

Speed of the particle at r:

Initial speed of the particle is given as 4 m/s. We need to calculate the final speed of the particle when it is at r. We can calculate the final speed using the work-energy principle which states that the work done by a force is equal to the change in kinetic energy of the particle.i.e., W = ΔKE. Total work done by the force is -7 N.m. Initial KE of the particle is 1/2 × 3.97 kg × (4 m/s)2 = 31.76 J.

Substituting the values in the above equation, we get

-7 = ΔKE - 31.76ΔKE = 24.76 J

Final KE of the particle is ΔKE = 1/2 × 3.97 kg × v2... (1)

Substituting the value of ΔKE in equation (1), we get

24.76 = 1/2 × 3.97 kg × v2v2 = 12.426 m2/s2v = 3.52 m/s

Therefore, the speed of the particle at r is 3.52 m/s.

Change in the potential energy of the system:

Potential energy of a system is defined as the work done by conservative forces to bring the particle from infinity to that position. Since the given force is not a conservative force, we cannot calculate the change in the potential energy of the system.

Learn more about potential energy, Speed and force at: https://brainly.com/question/24284560

#SPJ11

The force which the ball exerts on the bat is about 392.173 Newtons. This can be calculated through the velocity change of ball.

Initial velocity of the ball = 40.0 m/s, Final velocity of the ball = 54.0 m/s, Mass of the ball = 145 g = 0.145 kg

Time taken by the ball to hit the bat = 2.30 ms = 2.30 × 10⁻³ s

The average vector force the ball exerts on the bat during their interaction is given by the relation: F = (m × Δv) / Δt

where, m = mass of the ball, Δv = change in velocity, Δt = time taken by the ball to hit the bat

Initial velocity of the ball, u = 40.0 m/s

Final velocity of the ball, v = 54.0 m/s

Change in velocity, Δv = v - u = 54.0 - 40.0 = 14.0 m/s

Time taken by the ball to hit the bat, Δt = 2.30 × 10⁻³ s

Mass of the ball, m = 0.145 kg

Substituting the values in the formula: F = (m × Δv) / Δt = (0.145 × 14.0) / (2.30 × 10⁻³) = 0.904 / (2.30 × 10⁻³) = 392.173 N (upward)

So, the force the ball exerts on the bat is 392.173 N (upward).

Learn more about Force here:

https://brainly.com/question/13191643

#SPJ11

When a tree is planted in an orchard, the tree's height increases by 8% every year. The height of the tree is 78 cm when it is planted.

The correct formula that can be used to calculate the height of the tree years after planting is:

[tex]h = 78(1.08)^t[/tex]

where "h" represents the height of the tree after "t" years of planting, and 1.08 is the growth factor that takes into account the 8 percent increase in height each year.

To use the formula, simply substitute the value of "t" with the number of years since planting, and then evaluate the expression to get the height of the tree in centimeters. For example, after 5 years, the height of the tree would be:

[tex]h = 78(1.08)^5[/tex]

h = 114.60 cm

Learn more about percent:

https://brainly.com/question/24877689

#SPJ11

The electric field at a distance r from the center of a sphere of total charge Q is given by E=Q/(4πε0r^2). Calculate the radius of the earth R = 6.37 x 10^6 m2. Determine the volume of the earth V = (4/3)πR^33. Use the density of the earth, 5.5 g/cm3 to determine the mass of the earth m = density x volume4. Calculate the total charge of the earth Q = E x 4πε0R^2 Where,ε0 = permittivity of free spaceε0 = 8.85 x 10^-12 C^2 / Nm^2(a) The radius of the earth, R is;R = 6.37 x 10^6 m(b) Volume of the earth, V is;V = (4/3)πR^3= (4/3)π(6.37 x 10^6)^3= 1.086 x 10^21 m^3(c) Mass of the earth, m is;m = density x volume= 5.5 g/cm^3 × 1.086 x 10^21 m^3 × (10^3 cm/m)^3= 5.98 x 10^24 kg(d) Total charge of the earth, Q is;Q = E x 4πε0R^2= 100 (V/m) × 4π(8.85 × 10^-12 C^2/Nm^2) × (6.37 × 10^6 m)^2= 8.86 × 10^11 C.

Therefore, the total charge of the earth is 8.86 × 10^11 C.

For more information regarding this topic, you can click the below link

https://brainly.com/question/19878202

#SPJ11

Running on a treadmill is slightly easier than running outside because there is no drag force to work against. Suppose a 60 kg runner completes a 5.0 km race in 22 minutes. The drag force on the runner during the race is 13.4 N.

Running on a treadmill is slightly easier than running outside because there is no drag force to work against. Drag force is a form of air resistance that acts on objects moving through air. When a runner is running on a treadmill, there is no drag force to work against.

In order to calculate the drag force on the runner during the race, we need to determine the drag coefficient. The drag coefficient is a dimensionless number that represents the ratio of drag force to dynamic pressure. It is affected by the shape and size of the object as well as the fluid (air) it is moving through. Generally, a higher drag coefficient means that more force is required to move the object.

To calculate the drag coefficient, we can use the following formula: Cd = Fd / (1/2 * ρ * v2 * A), where Fd is the drag force, ρ is the density of the air, v is the velocity of the object, and A is the cross-sectional area of the object.

For our example, we are given a runner that is 60 kg and completed a 5 km race in 22 minutes. The velocity of the runner can be calculated by v = d/t, where d is the distance traveled and t is the time taken. This gives us a velocity of 8.3 m/s. The density of the air is given to be 1.2 kg/m3 and the cross-sectional area is 0.72 m2.

Plugging these values into the formula gives us a drag coefficient of 0.385. This means that for every 1 unit of dynamic pressure, the drag force is 0.385. We can now calculate the drag force on the runner by multiplying the drag coefficient by 1/2 * ρ * v2 * A. In this case, the drag force is 13.4 N.

In conclusion, the drag force on the runner during the race is 13.4 N. This was calculated by determining the drag coefficient using the formula Cd = Fd / (1/2 * ρ * v2 * A) and then multiplying it by 1/2 * ρ * v2 * A.

For more such questions on Drag force.

https://brainly.com/question/12774964#

#SPJ11

The ratio of the low temperature to high temperature of the Carnot engine is 2.38.

The efficiency of the Carnot engine can be defined as the ratio of network done per cycle by the engine to the heat energy absorbed by the engine per cycle by the working substance from the source.

Efficiency = 1 - (Tlow/Thigh)


Heat absorbed by engine = 480J

Heat expelled by engine = 320J

Efficiency of the engine = 56% of efficiency of Carnot engine

The ratio of low temperature to high temperature in the Carnot engine.

Let's assume the efficiency of the Carnot engine is 'ηc' = 1 - T₂/T₁

Where, T₂ = Low temperature and T₁ = High temperature

To calculate the efficiency of the engine given, η = (Q1 - Q2)/Q1

η = (480 - 320)/480

η = 160/480

η = 1/3

η = 33.33%

Now, η = 56% × ηc

0.56ηc = 1/3ηc = (1/3)/0.56 = 0.58

As we already know, ηc = 1 - T₂/T₁

T₂/T₁ = 1 - ηc

T₂/T₁ = 1 - 0.58

T₂/T₁ = 0.42

T₁/T₂ = 1/0.42

T₁/T₂ = 2.38

Therefore, the ratio of low temperature to high temperature in the given Carnot engine with an efficiency of 56% will be about 2.38.

Learn more about Carnot engine here:

https://brainly.com/question/14680478

#SPJ11

The principle that best describes the motion of the stuffed animal as the car accelerated is inertia.

Inertia is a property of matter that describes the resistance of an object to changes in its state of motion. An object will stay at rest or continue moving in a straight line at a constant speed if no external force acts upon it. This property of matter is referred to as inertia.

The stuffed animal in the scenario experienced the effects of inertia. The stuffed animal was at rest on the dashboard, and when the car accelerated quickly, the stuffed animal had a tendency to remain at rest due to its inertia. This resistance to a change in motion led to the stuffed animal being propelled backward and off the dashboard and onto the seat.

The principle that best describes the motion of the stuffed animal as the car accelerated is inertia. The stuffed animal had a tendency to remain at rest due to its inertia. This resistance to a change in motion led to the stuffed animal being propelled backward and off the dashboard and onto the seat.

Learn more about inertia:

https://brainly.com/question/1830739

#SPJ11

Answer:

An atom is the smallest unit of matter that retains the chemical properties of an element. Atoms are composed of a central nucleus, which contains protons and neutrons, surrounded by a cloud of negatively charged electrons.

The idea of the atom has been around for centuries, but it was not until the late 19th and early 20th centuries that scientists began to understand its structure. Some of the scientists involved in the discovery of the atom include:

John Dalton (1766-1844) - Dalton proposed the atomic theory, which stated that all matter is composed of small, indivisible particles called atoms.

J.J. Thomson (1856-1940) - Thomson discovered the electron and proposed the "plum pudding" model of the atom, in which electrons are embedded in a positively charged sphere.

Ernest Rutherford (1871-1937) - Rutherford conducted the gold foil experiment, which led to the discovery of the nucleus and the proposal of the nuclear model of the atom.

Niels Bohr (1885-1962) - Bohr proposed the planetary model of the atom, in which electrons orbit the nucleus in discrete energy levels.

The particles that atoms are composed of are protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus, while neutrons have no charge and are also located in the nucleus. Electrons have a negative charge and orbit the nucleus in shells or energy levels.

Explanation:

ABOVE

In addition to hundreds of smaller objects they have been discovering in the Kuiper Belt recently, astronomers were surprised to find dwarf planet Eris.

The first object that was bigger than Pluto was Eris. The initial estimate of Eris' size was 1,240 miles (2,000 kilometers) in diameter. It was later discovered to be a bit smaller, with a diameter of 1,163 miles (1,864 kilometers). Its moon, Dysnomia, was also discovered.Eris' orbit is far more eccentric than Pluto's, ranging from 38 to 97 astronomical units (AU) from the Sun.

Eris takes 557 Earth years to orbit the Sun. Despite the fact that Pluto's path also varies in shape, it is always closer to the Sun than Eris. Pluto and Eris were both discovered in the early 21st century, in 1930 and 2005, respectively. Because it was the largest known body in the Kuiper Belt, Pluto was formerly classified as the Solar System's ninth planet. Following the discovery of Eris and other trans-Neptunian objects, Pluto was reclassified as a dwarf planet.

Learn more about kuiper belt at:

https://brainly.com/question/25583240

#SPJ11

The force of static friction between the ground and the rock is equal to the coefficient of static friction multiplied by the normal force. Since the rock is of weight 500 N, the normal force is 500 N. Therefore, the force of static friction is 500 N × 0.50 = 250 N.

The rock is at rest on the ground. The rock's weight is 500 N. The coefficient of static friction between the ground and the rock is 0.50. If somebody pushes the rock to the right with an applied force of 100 N.

In the present situation, we need to determine the force of static friction between the ground and the rock. The rock is not moving, and therefore the maximum static friction force is equal to the applied force of 100 N. To find the normal force (FN), we'll have to start with calculating the gravitational force acting on the rock.

The force of gravity is given as:

Fg = mg

where, m = mass of the object, g = acceleration due to gravity

The weight of the rock is given as 500 N. We can find the mass of the rock by dividing the weight by the acceleration due to gravity. Therefore,

m = Fg/g = 500 N / 9.81 m/s² = 50.9 kg

Now, we can compute the normal force (FN) exerted by the ground on the rock as:

FN = mg = 50.9 kg × 9.81 m/s² = 500 N

Therefore, FS ≤ μs FN= 0.50 × 500 N = 250 N

The maximum static friction force that can be exerted by the ground is 250 N. Therefore, the force of static friction between the ground and the rock is 100 N.

Read more about friction here:

https://brainly.com/question/24338873

#SPJ11

When the person jumps off the platform, traveling a horizontal distance of 1.00 m while falling a vertical distance of 0.500 m to the ground, the final speed of the platform is: 0.602 m/s

The momentum of the person right before he jumps off is given by [tex]P = m*v = 75 kg * 0 m/s = 0 Ns.[/tex]

After he jumps off, the momentum of the platform-person system must remain the same: P = m*v. So, the final velocity of the platform after the person jumps off is given by v = P/m.

Now, we just need to calculate the new momentum of the system after the person jumps off. For that, we can use the conservation of energy, which states that the total energy in a closed system remains constant:

Potential energy before = Potential energy after + Kinetic energy after mgh

[tex]= (1/2)mv^2 + (1/2)Mv^2[/tex]

where m is the mass of the person (75.0 kg), M is the mass of the platform (155 kg), h is the height (0.500 m), and v is the velocity of the platform after the person jumps off.

Solving this equation for v, we get:

[tex]v = sqrt(2gh/(m+M))[/tex]

[tex]v = sqrt(2*9.81*0.500/(75.0+155)) = 0.602 m/s[/tex]

Therefore, the final speed of the platform is 0.602 m/s.

To know more about speed refer here:

https://brainly.com/question/28224010#

#SPJ11

Heat transfer that occurs through liquids and gases is called Convection.

Heat transfer is the exchange of thermal energy between physical systems. It occurs when there is a temperature difference between two objects or regions of space, causing heat to flow from the hotter system to the cooler one. There are three modes of heat transfer: conduction, convection, and radiation.

Conduction is the transfer of heat through a material by direct contact. In this mode, heat flows from a region of higher temperature to a region of lower temperature. Convection is the transfer of heat through a fluid (liquid or gas) by the movement of the fluid itself. This mode of heat transfer occurs through convection currents, where hot fluids rise and cooler fluids sink.

To learn more about Heat transfer visit here:

brainly.com/question/13433948

#SPJ4

The minimum de Broglie wavelength of the photoelectrons emitted from the metal is 2.19 x 10⁻⁹ m.

The energy of the incident photon can be calculated using the equation:

E = hc/λ

where h is the Planck constant, c is the speed of light, and λ is the wavelength of the light.

E = (6.626 x 10⁻³⁴J.s)(3.00 x 10⁸ m/s) / (105 x 10⁻⁹m)

E = 1.89 x 10⁻¹⁸ J

The work function of the metal is given as 5.00 eV, which can be converted to joules:

5.00 eV x 1.60 x 10⁻¹⁹ J/eV

= 8.00 x 10⁻¹⁹ J

The minimum energy required to eject an electron from the metal is the work function, so the kinetic energy of the emitted photoelectron can be calculated as:

K.E. = E - Work function

K.E. = 1.89 x 10⁻¹⁸ J - 8.00 x 10⁻¹⁹ J

K.E. = 1.09 x 10⁻¹⁸ J

The de Broglie wavelength of the photoelectron can be calculated using the equation:

λ = h/p

where h is the Planck constant and p is the momentum of the particle.

The momentum of the photoelectron can be calculated as:

p = √(2mK.E.)

where m is the mass of the electron.

p = √(2 x 9.11 x 10⁻³¹ kg x 1.09 x 10⁻¹⁸ J)

p = 3.03 x 10⁻²⁵ kg.m/s

Now, we can calculate the de Broglie wavelength of the photoelectron:

λ = h/p

λ = 6.626 x 10⁻³⁴ J.s / 3.03 x 10⁻²⁵ kg.m/s

λ = 2.19 x 10⁻⁹ m

Therefore, the minimum de Broglie wavelength of the photoelectrons emitted from the metal is 2.19 x 10⁻⁹ m.

Learn more about de Broglie wavelength here:

https://brainly.com/question/30404168

#SPJ11

Each tic mark indicates a time period of 9 seconds if the scale on the horizontal axis has a division of 9 seconds. As a result, the third tic point on the horizontal axis would denote the following period of time:

3 x 9 s = 27 s

Hence, 27 seconds are indicated by the third tic point on the horizontal axis.

It is true! The third tic point would represent three times nine seconds, or 27 seconds, as each tic mark on the horizontal axis denotes a time interval of nine seconds.Each tic mark indicates a time period of 9 seconds if the scale on the horizontal axis has a division of 9 seconds. As a result, the third tic point on the horizontal axis would denote the following period of time:Hence, 27 seconds are indicated by the third tic point on the horizontal axis.

learn more about horizontal axis here:

https://brainly.com/question/29774083

#SPJ4