The correct answer to the question about the phenol used in some mouthwashes and throat lozenges is option C, hexylresorcinol.
This compound is a type of phenol that is used as an antiseptic and disinfectant in various products, including mouthwashes and throat lozenges.
It is effective in killing bacteria and other microorganisms that can cause infections and other health problems.
Therefore, the correct answer to this question is hexylresorcinol.
Hexylresorcinol is a substituted phenol with bactericidal, antihelminthic and potential antineoplastic activities.
Hexylresorcinol is used as an antiseptic in mouthwashes and skin wound cleansers.
The antibacterial effects of hexylresorcinol in vivo may be mediated through several mechanisms including reducing bacterial adherence to the pharynx, inhibiting bacterial biofilm formation, disrupting bacterial cell chain formation, and modifying cell surface hydrophobicity
To know more about phenol, refer here:
https://brainly.com/question/30650792#
#SPJ11
which of the following is true about a chemical reaction in which the reactant stores less energy than the product
The reactant in a chemical process that releases less energy than the result does the following. Heat absorption will help the reaction move forward.
Heat absorption refers to the process by which a material or object takes in and retains thermal energy from its surroundings. This can occur through several mechanisms, including conduction, convection, and radiation.
The ability of a material to absorb heat is determined by its specific heat capacity, which is a measure of how much energy is required to raise the temperature of the material by a given amount. Materials with a high specific heat capacity can absorb more heat without experiencing a significant increase in temperature.
Heat absorption has important implications in many areas of science and engineering, including thermodynamics, materials science, and climate science. It is also relevant to everyday life, as it affects the performance of various devices and systems, such as air conditioning units, solar panels, and cooking appliances.
Learn more about Heat absorption here:
https://brainly.com/question/13179315
#SPJ4
The complete question is:
Which of the following is true about a chemical reaction in which the reactant stores less energy than the product?
A system undergoes a process consisting of the following two steps:
Step 1: The system absorbs 72 J of heat while 35 J of work is done on it.
Step 2: The system absorbs 35 J of heat while performing 72 J of work.
Calculate ΔE for the overall process.
The total change in internal energy for the process is 70 J.
The change in internal energy (ΔE) of a system can be calculated using the first law of thermodynamics, which states that the change in internal energy of a system (ΔE) is equal to the heat added to a system (q) minus work done by the system (w):
ΔE = q - w
In this case, the system undergoes two steps:
Step 1: q = 72 J, w = -35 J (work is done on the system)
ΔE₁ = q - w = 72 J - (-35 J) = 107 J
Step 2: q = 35 J, w = 72 J (work is done by the system)
ΔE₂ = q - w = 35 J - 72 J = -37 J
The overall change in internal energy (ΔE) for the process is the sum of the changes in internal energy for each step:
ΔE = ΔE₁ + ΔE₂ = 107 J + (-37 J) = 70 J
Therefore, the overall change in internal energy for the process is 70 J.
To know more about internal energy here
https://brainly.com/question/11278589
#SPJ4
How many moles of silver chloride will be produced if 2 moles of silver is allowed to react with an unlimited amount of chlorine?
What is the mass, in grams, of 2.84 X 1023 particles of lead? (This is a 2- * 1 point
step mole conversion, not a
stoichiometry problem - you are not changing substances.)
The mass of lead based on data is 97.65 grams. The mean atomic mass of lead can be founded in periodic table of elements.
ExplanationGiven:
Lead element symbol = Pb.From periodic table of elements:Therefore:
First, calculate the moles of lead.
[tex]\begin{array}{ll}\sf n &\sf = \dfrac{N}{L}\\\\&\sf = \dfrac{2.84\times 10^{23}}{6.02 \times 10^{23}} \\\\&\sf = 0.471~moles.\end{array}[/tex]
Second, calculate the mass of lead.
[tex]\begin{array}{ll}\sf g&\sf = n \times Ar\\\\&\sf = 0.471 \times 207\\\\&\sf = 97.65~grams.\end{array}[/tex]
Learn more about representation of Avogadro's number on:
https://brainly.com/question/30168626
On Earth he weighs 720 newtons. List of weights: 655 N; 1,872 N; 792 N; 36 N; and 661 N. What planets does he visit?
On Earth he weighs 720 newtons. 36N is the weight. Therefore, the correct option is option D among all the given options.
What is weight?The gravitational force of attraction exerted on an item by the presence of a huge second object, including the Earth or Moon. Weight is a result of the fundamental law of gravitation: whatever two things have the same weight.
They attract each other using a force that really is directly related to the sum of their masses as well as inversely related to the square of something like the distance separating them due to their masses.
F = mass ×4/9g
= 720 ×4/9
=36N
Therefore, the correct option is option D.
To know more about weight, here:
https://brainly.com/question/12156778
#SPJ9
rank the following aqueous solution by increasing boiling point. (1) 0.10 m nacl (2) 0.10 m al(no3)3 (3) 0.30 m c12h22o11 (sucrose) instruction: type in (1), (2) or (3) in each answer box below. lowest --------------->--------------->-------------> highest <
The ranking from lowest boiling point to highest boiling point is (1) 0.10 m NaCl, (2) 0.10 m Al(NO3)3, (3) 0.30 m C12H22O11 (sucrose).
The boiling point of a solution is directly related to the solution's vapor pressure. This is due to the fact that, as the vapor pressure of the solution increases, the boiling point of the solution will also increase. The vapor pressure of a solution is a function of its concentration, so the higher the concentration of a solution, the higher its vapor pressure. Thus, the higher the concentration of a solution, the higher its boiling point.
Therefore, the correct order, from lowest to highest boiling point, is: (1) 0.10 m NaCl, (2) 0.10 m Al(NO3)3, (3) 0.30 m C12H22O11 (sucrose).
learn more about sucrose Refer:brainly.com/question/29186350
#SPJ4
Find the mode of the following number of boxes of graduated cylinders that were ordered for each lab of a college science department.
5,13,13,3,5,9,13,5,5,6
The mode is the value that appears most frequently in the data set. In this case, the value of 5 appears most frequently, occurring 4 times. Therefore, the mode of the number of boxes of graduated cylinders that were ordered for each lab of a college science department is 5.
The mode is a statistical measure that represents the value that appears most frequently in a data set. It is a useful measure of central tendency, especially when dealing with nominal or categorical data. The mode can be easily found by identifying the value with the highest frequency in the data set. In some cases, a data set may have multiple modes if there are two or more values with the same highest frequency.
learn more about mode here:
https://brainly.com/question/28566521
#SPJ4
How many atoms are in 1.2 mol of carbon?
How would I be able to solve this?
Answer:
23 atoms for the first question
Explanation:
The oxidation state of an ion is the same as—> A. The subscript in a formula. B the coefficient in an equation. C. The number of electrons accepted or given away by the atom. D the number of atoms in the formula.
The oxidation state of an ion is the same as the number of electrons accepted or given away by the atom (option C).
What is oxidation state?Oxidation state is the total number of electrons that an atom either gains or loses in order to form a chemical bond with another atom.
Oxidation state is also referred to as oxidation number, and it is the state of an atom having a particular oxidation number.
Examples of oxidation number are as follows:
Pb²+Na+Therefore, option C is synonymous to the oxidation state of an ion.
Learn more about oxidation state at: https://brainly.com/question/28793261
#SPJ1
add curved arrows to both structures to show the delocalization of electron pairs needed to form the other resonance contributor. resonance structure a consists of a benzene ring where carbon 1 has an o minus substituent with three lone pairs. carbons 2 and 3 are fused to a 6 membered ring. moving clockwise from the top fused carbon, the next two atoms are carbons that are double bonded to each other. the next position is a carbon double bonded to oxygen with two lone pairs. the next position is an oxygen with two lone pairs, and this is bonded to the bottom fused ring carbon. resonance structure b consists of a set of 2 fused 6 membered rings. the left ring consists of a carbon in position 1 that is double bonded to an oxygen with two lone pairs. moving clockwise, positions 2 and 3 are fused to the right ring. the carbon in position 2 is double bonded to the first clockwise carbon in the right ring. the next two carbons in the right ring are also double bonded. the carbon 3 positions clockwise from the top fused carbon is bonded to o minus with three lone pairs. this carbon is also bonded to an oxygen with two lone pairs, which is bonded to the bottom fused carbon. the bottom fused carbon is also bonded to the next clockwise carbon in the left ring. the last two carbons in the left ring are also double bonded to each other.
The curved arrow representation for the provided resonance structure is attached.
How to convey informationThe negative charge (lone pair) is moved towards the hybridized carbon and the pi electrons also move towards another carbon, so the delocalization takes place and forms new C=O, C=C bond, and then oxygen atom gets the negative charge.
The lone pairs on nitrogen atom moved to the hybridized carbon and another pi bond moves towards the oxygen atom. This is shown with the curved arrows.
Note that necessary diagrams are attached.
Learn more about electrons on:
https://brainly.com/question/26084288
#SPJ1
relationship between the polarity of molecules and their solubility and miscibility.
Polar molecules dissolve as well as miscible in polar solvents, while nonpolar molecules dissolve and miscible in nonpolar solvents.
What is polarity?Polarity is indeed a division of electric charge in chemistry that results in a molecule and its chemical groups possessing and electric dipole moment with a negative charges end as well as a positive charge end.
Atoms prefer to adopt the configuration of noble gases in order to achieve stability. As a result, we may deduce that chemical bonding was responsible for atom stability and the formation of molecules. Polar molecules dissolve as well as miscible in polar solvents, while nonpolar molecules dissolve and miscible in nonpolar solvents.
Therefore, polar molecules dissolve as well as miscible in polar solvents, while nonpolar molecules dissolve and miscible in nonpolar solvents.
To learn more about polarity, here:
https://brainly.com/question/3248676
#SPJ9
acid-catalyzed dehydration of 3-methyl-2-pentanol gives three alkenes: 3-methyl-1-pentene, 3-methyl-2-pentene, and 3-methylenepentane. draw the structure of the carbocation intermediate leading to the formation of 3-methyl-2-pentene. you do not have to consider stereochemistry. you do not have to explicitly draw h atoms. if more than one structure fits the description, draw them all. separate structures with signs from the drop-down menu.
3-methyl-2-Pentene is the correct answer. 3-methyl-2-pentene is an alkene with a molecular formula of C_5H_10. It is a colorless liquid with a pungent odor.
What are alkenes ?Alkenes are a class of organic compounds that contain a carbon-carbon double bond. They are unsaturated hydrocarbons, meaning that they have fewer hydrogen atoms than their corresponding saturated hydrocarbons.
The general formula for an alkene is Cn[tex]H_{2}[/tex]n, where "n" represents the number of carbon atoms in the molecule. The simplest alkene is ethene, which is also called ethylene and has the chemical formula [tex]C_{2} H_{4}[/tex]. Alkenes are important intermediates in many industrial processes and are used in the production of a variety of products including plastics, synthetic rubber, and solvents.
To learn more about alkenes, click the given link ;
https://brainly.com/question/13910028
#SPJ4
The green elements on this table are called ____________ elements. They each have two electrons in their
outer shell.
Answer:The green elements on the table you are referring to are called Noble gases or Inert gases.
Explanation:
The green elements on the table you are referring to are called Noble gases or Inert gases. They each have two electrons in their outer shell, which gives them a full and stable electron configuration.
find an example of each type of reaction. synthesis: decomposition: single replacement: double replacement:
Answer:
Explanation:
Synthesis
2H2 + O2 ---> 2 H2O
Decomposition
CaCO3----> CO2 + CaO
Single replacememt
Na + KCl---> KCl + Na
Double replacement
AgNO3 + NaCl --> AgCl + NaNO3
which statement correctly describes the quantum number n with reference to the bohr model of the hydrogen atom? select all that apply. multiple select question. n is a measure of the difference in energy between two energy levels. an electron with n
The statement that correctly describes the quantum number n is, "an electron with n = 2 is at a higher energy level than any other energy levels.
Generally, the set of numbers that is used to locate the position and energy of the electron in an atom are known as quantum numbers. Basically, there are four types of quantum numbers, which are named as, principal, azimuthal, magnetic and spin quantum numbers.
In any atom, there are a total of four quantum numbers: the principal quantum number (n), the orbital angular momentum quantum number (l), the magnetic quantum number (ml), and the electron spin quantum number (ms) which generally describes the characteristic properties of an atom.
Learn more about quantum numbers from the link given below.
https://brainly.com/question/16977590
#SPJ4
Consider the reaction
2SO2(g) + O2(g) ⇌ 2SO3(g)ΔH = −198.2 kJ/mol
How would the concentrations of SO2, O2, and SO3 at equilibrium change if we were to
(a) increase the temperature?
[SO2]:
The concentration increases.
The concentration decreases.
There is no change.
[O2]:
The concentration increases.
The concentration decreases.
There is no change.
[SO3]:
The concentration increases.
The concentration decreases.
There is no change.
(b) increase the pressure and decrease the volume?
[SO2]:
The concentration increases.
The concentration decreases.
There is no change.
[O2]:
The concentration increases.
The concentration decreases.
There is no change.
[SO3]:
The concentration increases.
The concentration decreases.
There is no change.
(c) add a catalyst?
[SO2]:
The concentration increases.
The concentration decreases.
There is no change.
[O2]:
The concentration increases.
The concentration decreases.
There is no change.
[SO3]:
The concentration increases.
The concentration decreases.
There is no change.
The concentrations of the components will vary as explained below.
Equilibrium reactions(a) If the temperature is increased, the equilibrium will shift in the endothermic direction to consume some of the added heat. This means that the concentration of SO2 and O2 will increase, while the concentration of SO3 will decrease.
[SO2]: The concentration increases.[O2]: The concentration increases.[SO3]: The concentration decreases.(b) If the pressure is increased and the volume is decreased, the equilibrium will shift in the direction that produces fewer moles of gas to relieve the pressure. Since there are 3 moles of gas on the left side of the equation and 2 moles of gas on the right side, the equilibrium will shift to the left to produce more SO2 and O2 and less SO3.
[SO2]: The concentration increases.[O2]: The concentration increases.[SO3]: The concentration decreases.(c) Adding a catalyst will increase the rate of the forward and reverse reactions equally, so the equilibrium concentrations of SO2, O2, and SO3 will remain the same, but they will be reached more quickly.
[SO2]: There is no change.[O2]: There is no change.[SO3]: There is no change.More on equilibrium reactions can be found here: https://brainly.com/question/15118952
#SPJ1
What is the nucleophile in Friedel-Crafts reaction?
The nucleophile in a Friedel-Crafts reaction is the alkyl or acyl group attached to the Lewis acid catalyst.
In a Friedel-Crafts reaction, a Lewis acid catalyst, such as aluminum chloride (AlCl3) or iron(III) chloride (FeCl3), is used to activate an alkyl or acyl halide to make it a better electrophile. The activated alkyl or acyl group then acts as the nucleophile, attacking the aromatic ring of the substrate to form a new carbon-carbon bond.
The overall reaction can be summarized as follows:
R-X + AlCl3 → R+ + AlCl4- (activation of the alkyl or acyl halide)
R+ + Ar-H → Ar-R + H+ (nucleophilic attack on the aromatic ring)
In this reaction, the nucleophile is the R group, which can be an alkyl or acyl group. The Lewis acid catalyst activates the alkyl or acyl halide, making it a better electrophile and allowing it to attack the aromatic ring.
The end result is the formation of a new carbon-carbon bond between the alkyl or acyl group and the aromatic ring.
To know more about Friedel-Crafts reaction, refer here:
https://brainly.com/question/28380688#
#SPJ11
Write the empirical formula of at least four binary ionic compounds that could be formed from the following ions: Fe^+2,Cr^+4, I^−, S^−2
The empirical formula of any ionic compound can be determined by balancing the charges on the ions to form a neutral compound.
Here are four binary ionic compounds that could be formed from the given ions:
[tex]FeI_2[/tex] : This compound is formed from [tex]Fe^+2[/tex] and [tex]I^-[/tex] ions. The charges on the ions are balanced, resulting in a neutral compound. The empirical formula is [tex]FeI_2[/tex].[tex]CrS_2[/tex] : This compound is formed from [tex]Cr^+4[/tex] and [tex]S^{-2[/tex] ions. The charges on the ions are balanced, resulting in a neutral compound. The empirical formula is [tex]CrS_2[/tex].FeS: This compound is formed from [tex]Fe^+2[/tex] and [tex]S^{-2[/tex] ions. The charges on the ions are balanced, resulting in a neutral compound. The empirical formula is FeS.[tex]CrI_4[/tex] : This compound is formed from [tex]Cr^+4[/tex] and [tex]I^{-[/tex] ions. The charges on the ions are balanced, resulting in a neutral compound. The empirical formula is [tex]CrI_4[/tex].These are just a few examples of binary ionic compounds that could be formed from the given ions.
Learn more about ionic compounds :
https://brainly.com/question/29005103
#SPJ4
Based on Table G, determine the mass of NH3 that must be dissolved in 200 grams of water to produce a saturated solution at 20C??
From the table of plots of solubility, it is clear that, the solubility of ammonia in 100 g of water is 55 g at 20°C. Then, the solubility at the same temperature for 200 g of water is 110 g.
What is solubility ?Solubility of a substance in a solvent at a specified temperature is the fraction of its concentration that can be dissolved in the solvent. Solubility depends on the bond type of the substance, its molecular mass, temperature and pressure.
For most of the salts, as the temperature increases, solubility increases. But for some compounds solubility decreases with temperature. From the graph, it is clear, that, the solubility of ammonia decreases with temperature.
The solubility of ammonia at 20 °C in 100 g of water is 55 g. Then, at this temperature, the solubility of ammonia in 200 g of water will be 110 g. Then, to form a saturated solution, 110 g or above of ammonia can be added.
Find more on solubility:
https://brainly.com/question/29589228
#SPJ9
Table G of your question is attached below:
a solution is made by mixing 500.0 ml of 0.04074 m na2haso4 with 500.0 ml of 0.04997 m naoh . complete the mass balance expressions for the sodium and arsenate species in the final solution.
The mass balance expression for the sodium is 45.36 mmol and arsenate is 49.98 mmol species in the final solution.
According to the following equation, sodium hydrogen arsenate ([tex]Na_{2} HAsO_{4}[/tex]) and sodium hydroxide ([tex]NaOH[/tex]) react to produce sodium arsenate ([tex]Na_{3} AsO_{4}[/tex]) and water ([tex]H_{2} O[/tex]) when combined:
[tex]Na_{2} HAsO_{4} + 2 NaOH[/tex] → [tex]Na_{3} AsO_{4} + 2 H_{2} O[/tex]
To determine the mass balance expressions for the sodium and arsenate species in the final solution, we need to consider the initial amounts of these species in each of the two solutions and the changes that occur upon mixing.
For the sodium ion ([tex]Na^{+}[/tex]), we have:
Initial amount
= (500.0 mL) x (0.04074 mol/L)
= 20.37 mmol
Amount added
= (500.0 mL) x (0.04997 mol/L)
= 24.99 mmol
Total amount
= 20.37 mmol + 24.99 mmol
= 45.36 mmol
The sodium ion participates in the reaction as a spectator but doesn't change chemically. As a result, the following is the mass balance statement for [tex]Na^{+}[/tex] in the final solution:
[[tex]Na^{+}[/tex]] = 45.36 mmol
For the arsenate ion ([tex]AsO_{4} ^{2-}[/tex]), we have:
Initial amount
= (500.0 mL) x (0.04074 mol/L)
= 20.37 mmol
Amount added
= (500.0 mL) x (0.04997 mol/L) x (2/1)
= 49.98 mmol
Total amount
= 20.37 mmol + 49.98 mmol
= 70.35 mmol
In the reaction, 1 mol of [tex]Na_{2} HAsO_{4}[/tex]produces 1 mol of [tex]Na_{3} HAsO_{4}[/tex]. Therefore, the amount of [tex]AsO_{4} ^{2-}[/tex]produced is equal to the amount of [tex]Na_{2} HAsO_{4}[/tex] that reacted. Since we started with 20.37 mmol of [tex]Na_{2} HAsO_{4}[/tex] and it reacts in a 1:1 ratio with [tex]NaOH[/tex], the amount of [tex]Na_{2} HAsO_{4}[/tex] that reacted is equal to:
Amount of [tex]Na_{2} HAsO_{4}[/tex] reacted
= (500.0 mL) x (0.04074 mol/L)
= 20.37 mmol
The remaining amount of [tex]AsO_{4} ^{2-}[/tex] in the final solution is therefore:
Amount of [tex]AsO_{4} ^{2-}[/tex] in the final solution
= 70.35 mmol - 20.37 mmol
= 49.98 mmol
The mass balance expression for [tex]AsO_{4} ^{2-}[/tex] in the final solution is:
[ [tex]AsO_{4} ^{2-}[/tex]] = 49.98 mmol
Therefore, the mass balance expressions for the sodium and arsenate species in the final solution are:
[[tex]Na^{+}[/tex]] = 45.36 mmol
[ [tex]AsO_{4} ^{2-}[/tex]] = 49.98 mmol
For similar questions on mass balance expression,
https://brainly.com/question/14702203
#SPJ4
TRUE/FALSE. the particles are so small compared with the distances between them that the volume of the individual particles can be assumed to be zero.
The statement that, the particles are so small compared with the distances between them that the volume of the individual particles can be assumed to be zero is true.
This statement is a reasonable approximation for the behavior of particles in a gas or a dilute solution, where the individual particles are separated by relatively large distances. In these cases, the particles are typically much smaller than the average distance between them, so their volume can be assumed to be negligible.
However, in condensed phases such as liquids and solids, the particles are much closer together, and their volumes cannot be ignored.
To know more about the particles, here
brainly.com/question/13009091
#SPJ4
chlorine atoms have seven electrons in the outermost shell. as a result, one would expect chlorine to form ions with a charge of___
Chlorine atoms have 7 electrons in the outermost shell. As a result, one would expect chlorine to form ions with a charge of -1.
What is charge of an element?
Due to their equal amounts of protons and electrons, elements typically have no charge. Some atoms can, however, create ions by receiving or losing electrons to acquire a net positive or negative charge. Based on the periodic table group, you may calculate what this charge will be.
Compared to sodium, chlorine attracts electrons more strongly (shown by the thicker arrow). Chlorine is a negative ion with a charge of 1, making it such because it has 1 more electron than protons. Atoms acquire or lose electrons during the formation of ions until their outer energy level is reached.
Therefore, Chlorine has a charge of -1.
To learn more about Charge of an element with the help of a given link:
https://brainly.com/question/5306358
#SPJ4
The radius of a single atom of a generic element X is 151 picometers (pm) and a crystal of X has a unit cell that is body-centered cubic. Calculate the volume of the unit cell.
The volume of the unit cell of element X is approximately 1.785 × 10⁸ picometers cubed (pm³).
What is the volume of the unit cell?
In a body-centered cubic unit cell, there are atoms at each of the eight corners of the cube, and one atom in the center of the cube. Each atom at the corner is shared by eight unit cells, while the atom at the center is contained within a single unit cell.
The distance from one corner of the cube to the opposite corner is equal to four times the radius of the atom (i.e. 4 × 151 pm = 604 pm), which is known as the body diagonal of the cube.
Therefore, the length of one side of the cube is given by:
a = (4/√3) × r
= (4/√3) × 151 pm
≈ 554.6 pm
The volume of the unit cell is then given by:
V = a³
= (554.6 pm)³
≈ 1.785 × 10⁸ pm³
Learn more about volume of unit cell here: https://brainly.com/question/28191873
#SPJ1
how many grams of H2 are produced when 67.12 grams of HCl are reacted with copper
1.852 grams of H₂ are produced when 67.12 grams of HCl are reacted with copper.
What is mole ?A mole is a important unit of measurement. 1 mole = 6.023 × 10²³ particles.
The term mole is defined as the amount of matter containing 6.023 × 10²³ molecules.
For each two moles of HCl there is one mole of hydrogen.
So first convert the grams to moles.
Then find formula mass of HCl
The mass of hydrogen = 1.007 amu
mass of chlorine = 35.453 amu
Then 1.007 + 35.453 = 36.46 grams
Hence, one mole of HCl = 36.46 grams/mol
67.12g ÷ 36.46 = 1.84 moles
Therefore, 1.84 mols / 2
= 0.92 moles of hydrogen
Now to convert the moles into grams by multiply the number of moles of hydrogen by the atomic mass of hydrogen
= 0.92 mols × 2.014 g/mol
= 1.852 grams of hydrogen
We get 1.852 grams of hydrogen.
Thus, 1.852 grams of H₂ are formed.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ9
HELP ASAP! I WILL GIVE YOU BRAINLIST IF YOU SOLVE THESE TWO QUESTIONS
Answer: All visible light waves except red are absorbed by the ball. The wave transfers its energy to the material.
Explanation: The red is reflected back, which is how we see color. This is why most plants look green, they cannot absorb green light.
Wave Absorption Source: https://study.com/academy/lesson/what-is-wave-absorption-definition-examples.html
This question is based on the Subduction Zones topic in the Tsunami Initiation Animation. Click here to access it. 1st attempt The initiation of a tsunami by a stick-slip subduction zone is similar to the motion experienced by which type of fault?
The initiation of a tsunami by a stick-slip subduction zone is similar to the motion experienced by reverse fault.
A reversal fault experiences similar motion as a stick-slip subduction zone when it starts a tsunami. The majority of tsunamis are created by subduction zones, which result in earthquakes when two tectonic plates collide beneath the ocean and encourage the movement of overlapping water.
The energy that builds up as a result of the friction between the plates increases to the point where it may be extrapolated to the limit between the two plates. When a reverse failure occurs in this process, the movement experienced by a reverse failure is analogous to the start of a tsunami through a stick-slip subduction zone.
Learn more about reverse fault at https://brainly.com/question/2307144
#SPJ4
Which one of the following correctly ranks the compounds in order of lowest enthalpy of vaporization to highest enthalpy of vaporization based only in intermolecular forces?
A) CH₃NH₂ < CH₃SH < CH₃CH₃
B) CH₃NH₂ < CH₃CH₃ < CH₃SH
C) CH₃CH₃ < CH₃SH < CH₃NH₂
D) CH₃SH < CH₃NH₂ < CH₃CH₃
Rank of the given compounds in order of lowest to highest enthalpy of vaporization as follows CH₃NH₂ < CH₃SH < CH₃CH₃.
The enthalpy of vaporization of a substance is related to the strength of its intermolecular forces. Substances with weaker intermolecular forces tend to have lower enthalpies of vaporization, as they require less energy to overcome those forces and vaporize.
In this order, the compounds have increasing strength of intermolecular forces. Methanethiol (CH₃SH) has stronger intermolecular forces than methylamine (CH₃NH₂), and both of these have stronger intermolecular forces than propane (CH₃CH₃).
This is because CH₃NH₂ and CH₃SH can form hydrogen bonds between molecules, while CH₃CH₃ can only experience weaker London dispersion forces.
Hence, the correct option is A.
To know more about vaporization here
https://brainly.com/question/486624
#SPJ4
what is the mass, in grams, of 1.28 mol of water, h2o ? express the mass in grams to three significant figures. view available hint(s)for part a
The mass of 1.28 mol of water is 23.04 grams to three significant figures.
Molar mass is the mass of one mole of a substance, which is expressed in units of grams per mole (g/mol). The molar mass of a compound is the sum of the atomic masses of all the atoms in the compound.
The molar mass of water (H2O) is approximately 18.015 g/mol.
To find the mass of 1.28 mol of water, we can use the following calculation:
mass = number of moles × molar mass
mass = 1.28 mol × 18.015 g/mol
mass = 23.04 g
Therefore, the mass of 1.28 mol of water is 23.04 grams to three significant figures.
To know more about the Molar mass, here
brainly.com/question/12127540
#SPJ4
Which of the following compounds is a strong electrolyte?
CH3OH
H2O
HF
NaF
CH3CH2OH
Among the following compounds, a strong electrolyte is NaF. It gives its constituent ions Na+ and F- when dissolved in water.
What are electrolytes ?Electrolytes are molten or liquid substances containing ions which are free to move within the solution. There are two types of electrolytes namely strong electrolytes and weak electrolytes.
Strong electrolytes are those which are able to completely dissociates into its ions and thus conduct current. Weak electrolytes are weakly ionize or do not dissociates into its ions completely.
NaOH, KOH, NaCl , NaF etc are strong electrolytes. Whereas acetic acid, HF, water etc. are weak electrolytes. Strong ionic compounds are strong electrolytes too. Hence, NaF is the correct option.
Find more on electrolytes:
brainly.com/question/29771118
#SPJ9
Based on this simulation, what is true of strong acids? Select all that apply.
Strong acids have lower pH values than weak acids.
When strong acids dissociate, the concentration of the strong acid in the solution becomes negligible.
Strong acids completely dissociate into H₂O (hydronium) and A (conjugate base) leaving almost no strong acid in the solution.
Strong acids dissociate to form more hydronium ions than a weak acid.
The products formed when a strong acid dissociates can carry out a reverse reaction to form the strong acid once more.
Based on this simulation, the following statements are true of strong acids:
- Strong acids have lower pH values than weak acids. This is because strong acids completely dissociate in water, releasing more H+ ions and lowering the pH of the solution.
- Strong acids completely dissociate into H₂O (hydronium) and A (conjugate base) leaving almost no strong acid in the solution. This is a key characteristic of strong acids, as they fully dissociate in water to form hydronium ions and the conjugate base.
- Strong acids dissociate to form more hydronium ions than a weak acid. Since strong acids fully dissociate in water, they release more H+ ions, which combine with water to form more hydronium ions.
The following statements are not true of strong acids:
- When strong acids dissociate, the concentration of the strong acid in the solution becomes negligible. While it is true that strong acids completely dissociate in water, the concentration of the strong acid does not become negligible. The concentration of the strong acid is simply equal to the concentration of the hydronium ions and the conjugate base.
- The products formed when a strong acid dissociates can carry out a reverse reaction to form the strong acid once more. This is not true of strong acids, as they fully dissociate in water and do not undergo a reverse reaction to form the strong acid again.
This is a characteristic of weak acids, which only partially dissociate in water and can undergo a reverse reaction to reform the weak acid.
To know more about strong acids, refer here:
https://brainly.com/question/16749233#
#SPJ11