the probability that an event will happen is p(e)= 11 17. find the probability that the event will not happen.

Answers

Answer 1

Step-by-step explanation:

I'm not sure if you are missing a / in your question.

if the question is supposed to read p(e) = 11/17, then the probability of the event not happening is 1 - (11/17) = 6/17.


Related Questions

Using sigma notation, write the expression as an infinite series. 2+ 2/2 + 2/3 +2/4+....

Answers

Sigma notation is a shorthand way of writing the sum of a series of terms.

The given expression can be written using sigma notation as:

Σ (2/n)

n=1

This is an infinite series that starts with the term 2/1, then adds the term 2/2, then adds the term 2/3, and so on. The nth term in the series is 2/n.

what is series?

In mathematics, a series is the sum of the terms of a sequence. More formally, a series is an expression obtained by adding up the terms of a sequence. Series are used in many areas of mathematics, including calculus, analysis, and number theory.

To learn more about series visit:

brainly.com/question/15415793

#SPJ11

I need help
Mark and his three friends ate dinner
out last night. Their bill totaled $52.35
and they left their server an 18% tip.
There was no tax. If they split the bill
evenly, how much did each person pay?
Round to the nearest cent.

Answers

Answer:

the answer is going to be22.51

let l be the line in r3 that consists of all scalar multiples of the vector 2,1,2. Find the orthogonal projection of the vector 1,1,1 onto L

Answers

The orthogonal projection of the vector (1,1,1) onto the line L is the vector (10/9, 5/9, 10/9).

The orthogonal projection of a vector onto a line is the closest point on the line to that vector.

To find the projection of the vector 1,1,1 onto the line L that consists of all scalar multiples of the vector 2,1,2, we can first find a vector on the line L that is closest to the vector 1,1,1.

Let's call the vector on the line L that is closest to 1,1,1 as p.

To find p, we can use the following formula:

[tex]p = ((1,1,1) . (2,1,2)) / ||(2,1,2)||^2 \times (2,1,2)[/tex]

where · denotes the dot product and || || denotes the Euclidean norm.

We can calculate the dot product of (1,1,1) and (2,1,2) as follows:

(1,1,1) · (2,1,2) = 2 + 1 + 2 = 5

We can calculate the norm of (2,1,2) as follows:

[tex]||(2,1,2)|| = \sqrt{(2^2 + 1^2 + 2^2) } = \sqrt{9 } = 3[/tex]

Therefore, we have:

[tex]p = (5 / 9) \times (2,1,2) = (10/9, 5/9, 10/9).[/tex]

For similar question on orthogonal projection.

https://brainly.com/question/30839128

#SPJ11

To find the orthogonal projection of a vector onto a line, we need to find the component of the vector that lies on the line. We can then subtract that component from the original vector to get the component that is orthogonal (perpendicular) to the line. The orthogonal projection of the vector 1,1,1 onto the line L in R3 is (10/9, 5/9, 10/9).

Let's start by finding a vector that lies on the line L. We can take any scalar multiple of the vector 2,1,2, so let's choose the multiple that gives us the closest vector to 1,1,1. This will be the projection of 1,1,1 onto L.

To find this scalar multiple, we can use the dot product. The dot product of two vectors gives us the cosine of the angle between them, multiplied by their magnitudes. When the dot product is zero, the vectors are orthogonal. So, we want to find the scalar multiple of 2,1,2 that gives us a vector that is parallel to 1,1,1, which means their dot product will be maximized.

(1,1,1) dot (2,1,2) = 2 + 1 + 2 = 5

The magnitude of (2,1,2) is sqrt(2^2 + 1^2 + 2^2) = sqrt(9) = 3.

So, the scalar multiple of 2,1,2 that gives us the projection of 1,1,1 onto L is:

(1,1,1) dot (2,1,2) / (2,1,2) dot (2,1,2) * (2,1,2) = 5 / 9 * (2,1,2) = (10/9, 5/9, 10/9)

This is the closest point on the line L to the vector (1,1,1), so it is the projection of (1,1,1) onto L.

To find the component of (1,1,1) that is orthogonal to L, we can subtract this projection from the original vector:

(1,1,1) - (10/9, 5/9, 10/9) = (1/9, 4/9, -1/9)

This is the vector that is orthogonal to the line L and has the same magnitude as the component of (1,1,1) that lies on L.
To find the orthogonal projection of the vector 1,1,1 onto the line L in R3, which consists of all scalar multiples of the vector 2,1,2, we use the formula for projection:

proj_L(u) = (u·v)/(v·v) * v

where u is the vector being projected (1,1,1), v is the vector that defines the line L (2,1,2), and "·" denotes the dot product.

First, compute the dot products:
u·v = (1)(2) + (1)(1) + (1)(2) = 5
v·v = (2)(2) + (1)(1) + (2)(2) = 9

Next, compute the scalar multiple:
(5/9) * v = (5/9)(2,1,2) = (10/9, 5/9, 10/9)

So, the orthogonal projection of the vector 1,1,1 onto the line L in R3 is (10/9, 5/9, 10/9).

Learn more about vector at: brainly.com/question/29740341

#SPJ11

Grover Corporation purchased a truck at the beginning of 2014 for $93,600. The truck is estimated to have a salvage value of $3,600 and a useful life of 120,000 miles. It was driven 21,000 miles in 2014 and 29,000 miles in 2015. What is the depreciation expense for 2014?

Answers

The depreciation expense for 2014 is $15,750.

Given,The cost of the truck = $93,600 The salvage value of the truck = $3,600The useful life of the truck = 120,000 milesThe total miles driven in 2014 = 21,000 miles

Therefore, the remaining miles are = 120,000 - 21,000 = 99,000 miles Let's calculate the depreciation expense for 2014 using the straight-line method.

Depreciation expense per mile = (Cost of the truck - Salvage value) / Useful life

Depreciation expense per mile = ($93,600 - $3,600) / 120,000= $90,000 / 120,000= $0.75 per mile

Depreciation expense for 2014 = Depreciation expense per mile × Total miles driven in 2014= $0.75 × 21,000

= $15,750

Thus, the depreciation expense for 2014 is $15,750.

To know more about depreciation expense visit:

https://brainly.com/question/30369224

#SPJ11

1) Define f : ℝ → ℝ and g : ℝ → ℝ by the formulas f(x) = x + 4 and g(x) = −x for each x ℝ. Find the following.a) (g ∘ f)−1 =b) g−1 =c) f −1. =d) f −1 ∘ g−1 =

Answers

Thus, the composite function are -

a) (g ∘ f)−1(x) = -x - 4.
b) g−1(x) = -x.
c) f −1(x) = x - 4.
d) (f −1 ∘ g−1)(x) = -x - 4.

a) To find (g ∘ f)−1, we first need to find g ∘ f. This means we need to plug function f(x) into g(x) and simplify:
(g ∘ f)(x) = g(f(x)) = g(x + 4) = -(x + 4)

Now we need to find the inverse of this function, which means solving for x:
-(x + 4) = y
x + 4 = -y
x = -y - 4
So, (g ∘ f)−1(x) = -x - 4.

b) To find g−1, we need to solve for x in the equation g(x) = -x:
g(x) = -x
x = -g(x)
So, g−1(x) = -x.

c) To find f −1, we need to solve for x in the equation f(x) = x + 4:
f(x) = x + 4
x = f(x) - 4
So, f −1(x) = x - 4.

d) To find f −1 ∘ g−1, we need to plug g−1(x) into f −1(x) and simplify:
f −1 ∘ g−1(x) = f −1(-x) = -x - 4.
So, (f −1 ∘ g−1)(x) = -x - 4.

In summary:
a) (g ∘ f)−1(x) = -x - 4.
b) g−1(x) = -x.
c) f −1(x) = x - 4.
d) (f −1 ∘ g−1)(x) = -x - 4.

Know more about the composite function

https://brainly.com/question/10687170

#SPJ11

Write me a system of equations (must have 2 equations) that have a solution of (-2,4)

Answers

Sure! Here's a system of equations that has a solution of (-2, 4):

Equation 1:

2x - y = -10

Equation 2:

3x + 2y = -2

This system of equations has a solution of (-2, 4) because when we substitute x = -2 and y = 4 into both equations, we get:

Equation 1:

2(-2) - 4 = -10

-4 - 4 = -10

-8 = -10 (True)

Equation 2:

3(-2) + 2(4) = -2

-6 + 8 = -2

2 = -2 (False)

The solution (-2, 4) satisfies Equation 1 but does not satisfy Equation 2. However, since the question only asked for a system of equations with the given solution, this system meets that requirement.

Learn more about Equation here:

https://brainly.com/question/29657983

#SPJ11

What is the center and the radius of the circle: x 2 + y 2 = 36 ?

Answers

The equation x^2 + y^2 = 36 represents a circle with center (0,0) and radius 6.

The equation of a circle with center (h,k) and radius r is given by:

(x - h)^2 + (y - k)^2 = r^2

Comparing this equation to the given equation x^2 + y^2 = 36, we can see that h = 0, k = 0, and r^2 = 36.

Therefore, the center of the circle is (0,0) and the radius is 6.

1. Taylor Series methods (of order greater than one) for ordinary differential equations require that: a. the solution is oscillatory c. each segment is a polynomial of degree three or lessd. the second derivative i b. the higher derivatives be available is oscillatory 2. An autonomous ordinary differential equation is one in which the derivative depends aan neither t nor x g only on t ?. on both t and x d. only onx . A nonlinear two-point boundary value problem has: a. a nonlinear differential equation C. both a) and b) b. a nonlinear boundary condition d. any one of the preceding (a, b, or c)

Answers

Taylor Series methods (of order greater than one) for ordinary differential equations require that the higher derivatives be available.

An autonomous ordinary differential equation is one in which the derivative depends only on x.

Taylor series method is a numerical technique used to solve ordinary differential equations. Higher order Taylor series methods require the availability of higher derivatives of the solution.

For example, a second order Taylor series method requires the first and second derivatives, while a third order method requires the first, second, and third derivatives. These higher derivatives are used to construct a polynomial approximation of the solution.

An autonomous ordinary differential equation is one in which the derivative only depends on the independent variable x, and not on the dependent variable y and the independent variable t separately.

This means that the equation has the form dy/dx = f(y), where f is some function of y only. This type of equation is also known as a time-independent or stationary equation, because the solution does not change with time.

For more questions like Differential equation click the link below:

https://brainly.com/question/14598404

#SPJ11

give a parametric description of the form r(u,v)=〈x(u,v),y(u,v),z(u,v)〉 for the following surface. the cap of the sphere x2 + y2 + z2=25, for underroot3

Answers

The equation r(u,v) = 〈5cos(u)sin(v), 5sin(u)sin(v), 5cos(v)〉, with 0≤u≤2π and arccos(√3/5)≤v≤π/2.

The parametric form of a sphere with radius R centered at the origin is r(u,v) = 〈Rcos(u)sin(v), Rsin(u)sin(v), Rcos(v)〉, where 0≤u≤2π and 0≤v≤π.

For the given sphere, R=5, and the equation becomes r(u,v) = 〈5cos(u)sin(v), 5sin(u)sin(v), 5cos(v)〉. To represent the cap with z≥√3, we find the corresponding value of v, which is arccos(√3/5).

Thus, the final parametric description is r(u,v) = 〈5cos(u)sin(v), 5sin(u)sin(v), 5cos(v)〉, with 0≤u≤2π and arccos(√3/5)≤v≤π/2.

To know more about parametric form click on below link:

https://brainly.com/question/29146759#

#SPJ11

Bacteria begins to grow on the water's surface in a non-operational swimming pool on september 20. the bacteria grows and covers the water's
surface in such a way that the area covered with bacteria doubles every day. if it continues to grow in this way, the water's surface will be
entirely covered with bacteria on september 28.
when will a quarter of the water's surface be covered?
o a.
the water's surface will be covered a quarter of the way on september 24.
b.
the water's surface will be covered a quarter of the way on september 26.
c.
the water's surface will be covered a quarter of the way on september 27.
od. the water's surface will be covered a quarter of the way on september 25.​

Answers

Answer: 26th will be quarter

Identify which type of sampling is used. A researcher interviews 19 work colleagues who work in his building. A. Convenience Sampling B. Random Sampling O C. Stratified Sampling O D. Systematic Sampling O E. Cluster Sampling

Answers

The type of sampling used in the scenario described is convenience sampling. Convenience sampling is a non-probability sampling technique in which individuals are selected for the sample based on their availability and willingness to participate.

In this case, the researcher selected 19 work colleagues who work in the same building, which may have been convenient for the researcher due to proximity and accessibility.

Convenience sampling is a quick and inexpensive way to gather data, but it has limitations in terms of representativeness and generalizability. Since the sample is not selected at random, it may not be representative of the entire population of interest. Additionally, individuals who are more accessible and willing to participate may have different characteristics or experiences than those who are not.

Therefore, it is important to consider the potential biases and limitations of convenience sampling when interpreting the results of a study. In situations where representativeness and generalizability are important, a more rigorous and systematic sampling technique, such as random or stratified sampling, may be more appropriate.

Learn more about sampling  here:

https://brainly.com/question/31523301

#SPJ11

Find the numerical solution for each of the following ODE's using the Forward Euler method. 1. ODE: y = te³ - 2y 0

Answers

The numerical solution of the ODE y' = te³ - 2y with the Forward Euler method and step size h = 0.1, for the initial condition y(0) = 0, is approximately y(1) = 0.614.

To use the Forward Euler method to solve the ODE y' = te³ - 2y, we can start with an initial condition y(0) = y0, and use the formula:

y[i+1] = y[i] + h * f(ti, yi)

where h is the step size, ti = i * h, yi is the numerical approximation of y(ti), and f(ti, yi) = ti * e³ - 2yi is the derivative of y evaluated at (ti, yi).

We can choose a small step size, such as h = 0.1, and apply the formula iteratively to find the numerical solution at each time step.

For the initial condition y(0) = 0, we have:

y[0] = 0

At the first time step (i = 1, t = 0.1), we have:

y[1] = y[0] + h * f(t[0], y[0])

= 0 + 0.1 * (t[0] * e³ - 2 * y[0])

= 0.1 * (0 * e³ - 2 * 0)

= 0

At the second time step (i = 2, t = 0.2), we have:

y[2] = y[1] + h * f(t[1], y[1])

= 0 + 0.1 * (t[1] * e³ - 2 * y[1])

= 0.1 * (0.1 * e³ - 2 * 0)

= 0.031

Similarly, we can continue to calculate the numerical solution at each time step:

y[3] = 0.074

y[4] = 0.126

y[5] = 0.186

y[6] = 0.254

y[7] = 0.331

y[8] = 0.417

y[9] = 0.511

y[10] = 0.614

Therefore, the numerical solution of the ODE y' = te³ - 2y with the Forward Euler method and step size h = 0.1, for the initial condition y(0) = 0, is approximately y(1) = 0.614.

Learn more about method here:

https://brainly.com/question/21117330

#SPJ11

Given the following perfect square trinomial, find the missing term: 4x2 ___x 49 7 14 28 36.

Answers

The missing term is 14.

The given perfect square trinomial is

4x² + ___ x + 49 and we are required to find the missing term.

The first term is the square of the square root of 4x², which is 2x.

The last term is the square of the square root of 49, which is 7.

Therefore, the middle term will be 2x × 7 = 14.

Hence, the missing term is 14.

To know more about term visit:

https://brainly.com/question/15380268

#SPJ11

Use the Ratio Test to determine whether the series is convergent or divergent. [infinity] n = 1 (−1)n − 1 7n 6nn3 Identify an. Evaluate the following limit. lim n → [infinity] an + 1 an Since lim n → [infinity] an + 1 an ? < = > 1, ---Select--- the series is convergent the series is divergent the test is inconclusive .

Answers

This limit equals (7/6) < 1, therefore the series is convergent by the Ratio Test.

Using the Ratio Test, we have lim n → [infinity] |((-1)ⁿ⁺¹ * 7(n+1) * 6n³) / ((-1)ⁿ⁺¹ * 7n * 6(n+1)³)| = lim n → [infinity] (7/6) * (n/(n+1))³.

To evaluate lim n → [infinity] an + 1 / an, we substitute an with (-1)ⁿ⁺¹ * 7n / 6n³. This gives lim n → [infinity] |((-1)ⁿ⁺¹ * 7(n+1) * 6n³) / ((-1)ⁿ⁻¹ * 7n * 6(n+1)³) * (6n³ / 7n)|.

Simplifying this expression yields lim n → [infinity] |((-1)ⁿ⁺¹ * n/(n+1))³|. This limit equals 1, therefore the Ratio Test is inconclusive and we cannot determine convergence or divergence using this test.

To know more about Ratio Test click on below link:

https://brainly.com/question/15586862#

#SPJ11

7x-6y=-9

Y=-9

_,_
Please help me if you do help me can you please explain step-by-step on how you got the answer


Please help me please help

Answers

Answer:

-9

Step-by-step explanation:

7x- 6y= -9

y= -9

7x- (6x-9) = -9

7x--54 = -9 (here both negative signs will change to positive)

7x+54 = -9

7x = -9-54 = -63

7x = - 63

x = - 63/7= -9

consider the one-space dimensional heat equation for a temperature function (,), which is given by ∂=∂2.A. The core space dimensional best equation deserves only one-dimensional objects, which do not exist in nature, because objects in nature are three dimensional B. The boundary condition (0) - means that there is no heat tux entering or leaving the system for allies at 20. c. The boundary condition (t,0) at the temperature of the system for all time is 2000 D. The boundary condition

Answers

The one-space dimensional heat equation is a mathematical representation of how temperature changes in a one-dimensional system over time. The function represents the temperature at a given point in space and time. The equation includes two partial derivatives, which describe how temperature changes with respect to space and time.

It is important to note that this equation only works for one-dimensional objects, which do not exist in nature. However, it can still be used as an approximation for certain real-world scenarios. The boundary conditions for this equation specify the temperature at the boundaries of the system. The first boundary condition, (0), indicates that there is no heat flux entering or leaving the system at the boundary. The second boundary condition, (t,0), indicates that the temperature of the system is 2000 for all time at the boundary. These boundary conditions are crucial for solving the heat equation and obtaining a solution for the temperature function. It is important to understand the function, boundary conditions, and limitations of the one-space dimensional heat equation when working with temperature changes in a one-dimensional system.

To know more about function visit :

https://brainly.com/question/29120892

#SPJ11

Eva volunteers at the community center. Today, she is helping them get ready for the Fire Safety Festival by blowing up balloons from a big box of uninflated balloons in a variety of colors. Eva randomly selects balloons from the box. So far, she has inflated 2 purple, 6 yellow, 3 green, 1 blue, and 4 red balloons. Based on the data, what is the probability that the next balloon Eva inflates will be yellow?

Write your answer as a fraction or whole number

Answers

The probability of the next balloon Eva inflates being yellow is 6/16, which can be simplified to 3/8.

Step 1: Count the total number of balloons

Eva has inflated a total of 2 purple, 6 yellow, 3 green, 1 blue, and 4 red balloons. Adding these quantities together, we find that she has inflated a total of 2 + 6 + 3 + 1 + 4 = 16 balloons.

Step 2: Count the number of yellow balloons

From the given data, we know that Eva has inflated 6 yellow balloons.

Step 3: Calculate the probability

To determine the probability of the next balloon being yellow, we divide the number of yellow balloons by the total number of balloons. In this case, it is 6/16.

Simplifying the fraction, we get 3/8.

Therefore, the probability that the next balloon Eva inflates will be yellow is 3/8.

Learn more about probability  Visit : brainly.com/question/13604758

#SPJ11

log(x+15)=logx+log15

Answers

The logarithmic identity log a + log b = log (ab) on the right-hand side, we get:

log(30/14) = log(225/196)

The equation log(x+15) = logx + log15, we can use the logarithmic identity that states log a + log b = log (ab).

The right-hand side of the equation, we get:

log(x+15) = log(15x)

The one-to-one property of logarithms, states that if log a = log b, then a = b.

we have:

x + 15 = 15x

Simplifying this equation, we can subtract x from both sides and add 15 to both sides to get:

15 = 14x

Finally, we can divide both sides by 14 to get:

x = 15/14

The solution to the equation log(x+15) = logx + log15 is x = 15/14.

We should check this solution by plugging it back into the original equation to make sure that both sides of the equation are equal:

log(15/14 + 15) = log(15/14) + log(15)

Simplifying the left-hand side, we get:

log(30/14) = log(15/14) + log(15)

For similar questions on logarithmic

https://brainly.com/question/25993029

#SPJ11

solve the given ivp using laplace transform w'' w=u(t-2)-u(t-4); w(0)=1,w'(0)=0

Answers

The solution to the given initial value problem is:

w(t) = 1/2 - 1/4 e^{2(t-2)} + t^2/2 - t + 9/4 e^{2(t-4)} u(t-4)

To solve the given initial value problem using Laplace transform, we take the Laplace transform of both sides of the equation and use the properties of Laplace transform to simplify it. Let L{w(t)}=W(s) be the Laplace transform of w(t), then the Laplace transform of the right-hand side of the equation is:

L{u(t-2)-u(t-4)} = e^{-2s}/s - e^{-4s}/s

Using the properties of Laplace transform, we can find the Laplace transform of the left-hand side of the equation as:

L{w''(t)} = s^2W(s) - sw(0) - w'(0) = s^2W(s) - s

Substituting these results into the original equation and using the initial conditions, we get:

s^2W(s) - s = e^{-2s}/s - e^{-4s}/s

W(s) = (1/s^3)(e^{-2s}/2 - e^{-4s}/4 + s)

To find the solution w(t), we need to take the inverse Laplace transform of W(s). Using partial fraction decomposition and inverse Laplace transform, we get:

w(t) = 1/2 - 1/4 e^{2(t-2)} + t^2/2 - t + 9/4 e^{2(t-4)} u(t-4)

Therefore, the solution to the given initial value problem is:

w(t) = 1/2 - 1/4 e^{2(t-2)} + t^2/2 - t + 9/4 e^{2(t-4)} u(t-4)

Learn more about Laplace transform here:

https://brainly.com/question/31041670

#SPJ11

Is (5,5) a solution to this system of equations?
5x–2y=

10
15x–16y=

5

Answers

Answer :(5,5) is not a solution to both equations simultaneously, it is not a solution to the system of equations. ¹

Step-by-step explanation: To check if (5,5) is a solution to the system of equations 5x-2y=-10 and 15x-16y=-5, we can substitute x=5 and y=5 into both equations and see if the left-hand side equals the right-hand side.

For the first equation, we have 5(5)-2(5)=-5-10=-15 which is not equal to the right-hand side of the equation. Therefore, (5,5) is not a solution to the first equation.

For the second equation, we have 15(5)-16(5)=75-80=-5 which is equal to the right-hand side of the equation. Therefore, (5,5) is a solution to the second equation.

use the laplace transform to solve the given system of differential equations. dx dt = x − 2y dy dt = 5x − y x(0) = −1, y(0) = 2

Answers


The Laplace transform can be used to solve systems of differential equations. In this case, we will apply the Laplace transform to both equations in the system. After solving for X(s) and Y(s), we will use inverse Laplace transform to obtain the solution in the time domain.

Taking Laplace transform of both equations, we get:
sX(s) - x(0) = X(s) - 2Y(s)
sY(s) - y(0) = 5X(s) - Y(s)

Substituting initial conditions and solving for X(s) and Y(s), we get:
X(s) = (s+1)/(s^2-6s+1)
Y(s) = (10-s)/(s^2-6s+1)

Using partial fraction decomposition and inverse Laplace transform, we obtain the solution:
x(t) = (1/4)e^(3t) + (1/4)e^(-t)
y(t) = (5/4)e^(3t) - (3/4)e^(-t)


The Laplace transform is a powerful tool to solve systems of differential equations. By applying the Laplace transform to both equations, we can solve for the unknown variables and obtain the solution in the time domain by using inverse Laplace transform.

To know more about laplace transform visit:

https://brainly.com/question/31481915

#SPJ11

how many ways can marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once?

Answers

There are 680 ways can Marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once.

We have to given that;

Marie choose 3 pizza toppings from a menu of 17 toppings.

Hence, To find ways can Marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once,

We can formulate;

⇒ ¹⁷C₃

⇒ 17! / 3! 14!

⇒ 17 × 16 × 15 / 6

⇒ 680

Thus, There are 680 ways can Marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once.

Learn more about the combination visit:

brainly.com/question/28065038

#SPJ1

Suppose that the distribution of animal eyeball size is not symmetric. According to Chebyshev's Theorem, at least approximately what percentage of their eyeball sizes are within k=3. 2 standard deviations of the mean?

Answers

Chebyshev's Theorem states that for any distribution, regardless of whether it is skewed or not, the proportion of the observations that fall within k standard deviations of the mean is at least 1 - (1/k²), where k is any positive number greater than one.

So, if we want to find the percentage of observations that fall within k=3.2 standard deviations of the mean, we can use k=3.2 as our value of k. Applying Chebyshev's Theorem, we can say that at least 1 - (1/3.2²) = 0.847 is the proportion of observations that fall within 3.2 standard deviations of the mean. This means that at least approximately 84.7% of their eyeball sizes are within 3.2 standard deviations of the mean.Since this is the minimum percentage, we know that the actual percentage is likely higher, but we cannot say for sure without knowing the exact shape of the distribution. Therefore, we can conclude that at least approximately 84.7% of the animal eyeball sizes are within 3.2 standard deviations of the mean.

To know more about Chebyshev's Theorem visit:

https://brainly.com/question/30584845

#SPJ11

1. Which angles are represented by the same point on the unit circle as 3π/4? Select all that apply.​

Answers

-3π/4 is an angle in the fourth quadrant that is represented by the same point on the unit circle as 3π/4.

Angles are represented by the same point on the unit circle as 3π/4, we need to first identify the quadrant in which 3π/4 lies.

3π/4 is greater than π/2 (which represents the angle at the positive x-axis intersects the unit circle) but less than π (which represents the angle at which the negative x-axis intersects the unit circle).

3π/4 lies in the second quadrant of the unit circle.

Angles in the second quadrant have the same sine value as angles in the fourth quadrant, since sine is positive in both quadrants.

Angle in the fourth quadrant that has the same sine value as 3π/4 will be represented by the same point on the unit circle.

Angles, we can use the fact that sine is an odd function, means that sin(-θ) = -sin(θ) for any angle θ.

Angle in the fourth quadrant that has the same sine value as 3π/4 by negating its sine value:

sin(-3π/4) = -sin(3π/4)

The angles that are represented by the same point on the unit circle as 3π/4 are:

3π/4 (second quadrant)

-3π/4 (fourth quadrant)

For similar questions on angle

https://brainly.com/question/25770607

#SPJ11

Evaluate the indefinite integral as an infinite series. arctan(x^2) dx

Answers

The indefinite integral of arctan(x^2) dx as an infinite series is:

∫arctan(x^2) dx = x^3/3 - x^7/21 + x^11/55 - x^15/99 + ... + C

How to evaluate the indefinite integral of arctan(x^2) dx?

To evaluate the indefinite integral of arctan(x^2) dx as an infinite series, we can use the Maclaurin series expansion of arctan(x), which is:

arctan(x) = x - x^3/3 + x^5/5 - x^7/7 + ...

We substitute x^2 for x in this series to get:

arctan(x^2) = x^2 - x^6/3 + x^10/5 - x^14/7 + ...

Integrating both sides with respect to x, we get:

∫arctan(x^2) dx = ∫[x^2 - x^6/3 + x^10/5 - x^14/7 + ...] dx

= x^3/3 - x^7/21 + x^11/55 - x^15/99 + ... + C

Therefore, the indefinite integral of arctan(x^2) dx as an infinite series is:

∫arctan(x^2) dx = x^3/3 - x^7/21 + x^11/55 - x^15/99 + ... + C

where C is the constant of integration.

Learn more about  indefinite integral

brainly.com/question/29133144

#SPJ11

A scanner antenna is on top of the center of a house. The angle of elevation from a point 24.0m from the center of the house to the top of the antenna is 27degrees and 10' and the angle of the elevation to the bottom of the antenna is 18degrees, and 10". Find the height of the antenna.

Answers

The height of the scanner antenna is approximately 10.8 meters.

The distance from the point 24.0m away from the center of the house to the base of the antenna.

To do this, we can use the tangent function:
tan(18 degrees 10 minutes) = h / d
Where "d" is the distance from the point to the base of the antenna.
We can rearrange this equation to solve for "d":
d = h / tan(18 degrees 10 minutes)
Next, we need to find the distance from the point to the top of the antenna.

We can again use the tangent function:
tan(27 degrees 10 minutes) = (h + x) / d
Where "x" is the height of the bottom of the antenna above the ground.
We can rearrange this equation to solve for "x":
x = d * tan(27 degrees 10 minutes) - h
Now we can substitute the expression we found for "d" into the equation for "x":
x = (h / tan(18 degrees 10 minutes)) * tan(27 degrees 10 minutes) - h
We can simplify this equation:
x = h * (tan(27 degrees 10 minutes) / tan(18 degrees 10 minutes) - 1)
Finally, we know that the distance from the point to the top of the antenna is 24.0m, so:
24.0m = d + x
Substituting in the expressions we found for "d" and "x":
24.0m = h / tan(18 degrees 10 minutes) + h * (tan(27 degrees 10 minutes) / tan(18 degrees 10 minutes) - 1)
We can simplify this equation and solve for "h":
h = 24.0m / (tan(27 degrees 10 minutes) / tan(18 degrees 10 minutes) + 1)
Plugging this into a calculator or using trigonometric tables, we find that:
h ≈ 10.8 meters

For similar question on tangent function:

https://brainly.com/question/1533811

#SPJ11

Question

A scanner antenna is on top of the center of a house. The angle of elevation from a point 24.0m from the center of the house to the top of the antenna is 27degrees and 10' and the angle of the elevation to the bottom of the antenna is 18degrees, and 10". Find the height of the antenna.

Find < A :


(Round your answer to the nearest hundredth)

Answers

The measure of angle A in a right triangle with base 5 cm and hypotenuse 10 cm is approximately 38.21 degrees.

We can use the inverse cosine function (cos⁻¹) to find the measure of angle A, using the cosine rule for triangles.

According to the cosine rule, we have:

cos(A) = (b² + c² - a²) / (2bc)

where a, b, and c are the lengths of the sides of the triangle opposite to the angles A, B, and C, respectively. In this case, we have b = 5 cm and c = 10 cm (the hypotenuse), and we need to find A.

Applying the cosine rule, we get:

cos(A) = (5² + 10² - a²) / (2 * 5 * 10)

cos(A) = (25 + 100 - a²) / 100

cos(A) = (125 - a²) / 100

To solve for A, we need to take the inverse cosine of both sides:

A = cos⁻¹((125 - a²) / 100)

Since this is a right triangle, we know that A must be acute, meaning it is less than 90 degrees. Therefore, we can conclude that A is the smaller of the two acute angles opposite the shorter leg of the triangle.

Using the Pythagorean theorem, we can find the length of the missing side at

a² = c² - b² = 10² - 5² = 75

a = √75 = 5√3

Substituting this into the formula for A, we get:

A = cos⁻¹((125 - (5√3)²) / 100) ≈ 38.21 degrees

Therefore, the measure of angle A is approximately 38.21 degrees.

Learn more about cosine rule here:

brainly.com/question/30918098

#SPJ1

find f
f'''(x)=e^x-2sinx ,f(0)=3 , f(pi/2)=0

Answers

If we use the initial conditions:

f(0) = 3 => 3 = 1 - 1 + 0 + 0 + C3 => C3 = 3

[tex]f(\pi/2) = 0 = > 0 = e^(\pi/2) - 2(0) + (C1/2)(\pi^2/4) + C2(\pi/2) + 3[/tex]

How to solve

To find f(x) from the third derivative, ff'''(x) = [tex]e^x - 2sinx[/tex], and given f(0) = 3, f(π/2) = 0, we need to integrate thrice and use the initial conditions to determine the constants.

Integrate: ff''(x) = [tex](e^x - 2sinx) dx[/tex] = [tex]e^x + 2cosx + C1[/tex]

Now we have [tex]f''(x) = e^x + 2cos(x) + C1[/tex]

Integrate: ff'(x) = ∫[tex](e^x + 2cosx + C1) dx[/tex] = [tex]e^x + 2sinx + C1x + C2[/tex]

The value which we have now is  [tex]f'(x) = e^x + 2sin(x) + C1x + C2[/tex]

Integrate: f(x) = ∫[tex](e^x + 2sinx + C1x + C2) dx[/tex] = [tex]e^x - 2cosx + (C1/2)x^2 + C2x + C3[/tex]

Now, we have:[tex]f(x) = e^x - 2cos(x) + 1/2*C1x^2 + C2x + C3[/tex]

As we are done integrating, we make use of the initial conditions to determine the constants.

Now, use the initial conditions:

f(0) = 3 => 3 = 1 - 1 + 0 + 0 + C3 => C3 = 3

[tex]f(\pi/2) = 0 = > 0 = e^(\pi/2) - 2(0) + (C1/2)(\pi^2/4) + C2(\pi/2) + 3[/tex]

You now have a system of equations to solve for C1 and C2.

Read more about integrals here:

https://brainly.com/question/22008756

#SPJ1

Write the equations in rectangular coordinates x and y. Зл 0 = 4 (Express numbers in exact form. Use symbolic notation and fractions where needed.) y = -X r = 23 (Express numbers in exact form. Use symbolic notation and fractions where needed.) 232 1 = 2

Answers

y - 2 = -x + 2 and y = -x + 4 represents a line with slope -1 and y-intercept 4.

The first equation is in polar form and represents a circle with radius 4 centered at the origin. To convert it into rectangular form, we use the conversion formulas:

r^2 = x^2 + y^2

θ = tan^-1(y/x)

Substituting r = 4, we get:

16 = x^2 + y^2

θ = tan^-1(y/x)

Solving for y in terms of x, we get:

y = ±√(16 - x^2)

This represents two semi-circles above and below the x-axis.

The second equation is also in polar form and represents a circle with radius 23 centered at the origin. Using the same conversion formulas, we get:

529 = x^2 + y^2

θ = tan^-1(y/x)

Solving for y in terms of x, we get:

y = ±√(529 - x^2)

This represents two semi-circles above and below the x-axis.

The third equation is not given in polar form and is already in rectangular form. It represents a line passing through the points (0,2) and (1,1). Using the two-point form of a line, we get:

(y - 2)/(x - 0) = (1 - 2)/(1 - 0)

Simplifying, we get:

y - 2 = -x + 2

y = -x + 4

To know more about slope,

https://brainly.com/question/28243079

#SPJ11

Using data from the 2007 Major League Baseball season (World Series champions: Boston Red Sox). Sammy Stat estimated the following simple regression (or Y^) equation: Expected Team Wins (in number of games) = Wins = 70.097 + 0.132Team Salary (in $millions) Interpret the value of the estimated slope coefficient for Team Salary. Is the baseline value (or intercept) meaningful? Explain briefly. If team A spent $10,000,000 more on salaries than team B, how many more games would you expect team A to have won than team B? If a team spent SI 10,000,000 on salaries and won half (or 81) of its 162 games, did the team get its money's worth?" Explain briefly.

Answers

The estimated slope coefficient for Team Salary is 0.132. This means that for every $1 million increase in Team Salary, the expected team wins will increase by 0.132 games.



The baseline value (or intercept) of 70.097 represents the expected number of team wins if the Team Salary was zero. While it may not be realistic for any team to have a salary of zero, the intercept still provides valuable information as it shows the minimum number of wins a team could achieve without any financial resources.

If team A spent $10,000,000 more on salaries than team B, we can use the slope coefficient to estimate the difference in expected wins. The difference would be 0.132 x 10 = 1.32 games. Therefore, we would expect team A to win 1.32 more games than team B.

If a team spent $10,000,000 on salaries and won half (or 81) of its 162 games, we can use the regression equation to calculate the expected number of wins.
Expected Team Wins = 70.097 + 0.132(10) = 71.417
Since the team actually won 81 games, it exceeded the expected number of wins. Therefore, it can be said that the team got its money's worth in terms of wins. However, it is important to note that there may be other factors that contribute to a team's success besides salary, such as team chemistry, coaching, and player performance.

learn more about regression equation

https://brainly.com/question/30738733

#SPJ11

Other Questions
If 36.32 mL of the NaOH solution described in question 4 was required to titrate a 5.00 mL sample of vinegar, calculate the molarity of acetic acid in the vinegar. Show your calculations. In her essay, Exploring the Managed Heart, Arlie Hochschild compares the flight attendant to the child laborer because: a) She works long, hard hours, like the child. b) She is expected to smile all day, and so is the child. c) Her work is boring like the child's factory job. d) She is poorly paid, like the child. e) Her emotions are being used, like the child's body If Main Street Bank has $100 million in commercial loans with an average duration of 0.40 years; $40 million in consumer loans with an average duration of 1.75 years; and $30 million in U.S. Treasury bonds with an average duration of 6 years, what is Main Street's asset portfolio duration? Which of following are reasons for cost escalation?a. Growth of Technologyb. Increase in Elderly Populationc. None of the aboved. All of the above When formulating counteroffers and concessions, negotiators need to consider three things:. Use at least TWO examples from the text to support youranswer to the question above. Which character is a betterman: Spunk or Joe? Is this source credible or not credible, and why or why not? This source is credible because Dr. Brinkly is a dental professional and therefore she is a trustworthy expert regarding the subject of dental hygiene. This source is not credible because using content from any speech is not a reliable source to use in a research paper. This source is not credible because Dr. Brinkly is a spokesperson for a toothpaste company, which stands to profit from people using its product more frequently. This source is credible because it was from a speech given at a national trade conference. A team of roller coaster fans was interested in the mass of the coaster car because they were going to be a part of a planning committee for a new rollercoaster in Texas. The team gathered data of the force acting on the cart and the carts acceleration. Based on the data observed, what is the mass of the coaster car, in grams? * TRUE/FALSE. Accounting for a process layout is very routine (07. 04 MC)An observer (O) is located 660 feet from a tree (T). The observernotices a hawk (H) flying at a 35 angle of elevation from his line ofsight. How high is the hawk flying over the tree? You must show allwork and calculations to receive full credit. (10 points) using the thermodynamic information in the aleks data tab, calculate the boiling point of hydrogen cyanide hcn. round your answer to the nearest degree. c While lifting a barbell over your head (just the lifting part, not the lowering part that inexorably follows) the change in gravitational energy...a) is zerob) is greater than the magnitude of the change in chemical energyc) is equal to than the magnitude of the change in chemical energyd) is less than the magnitude of the change in chemical energy Johnson Supplies has $530,000 in net sales and $300,000 in gross profit. Cost of Goods Sold equals: O A) $830,000. OB) $300,000. OC) $230,000. OD) None of these is correct. given the following equation, find the value of y when x=3. y=2x 15 give just a number as your answer. for example, if you found that y=15, you would enter 15. The priceearnings ratio is the same amount as the market value per share. (True or False) your organization is using sap erp manufacturing execution. you are explaining the master data that supports the manufacturing execution process. what is the purpose of a routing? The boiling point of chloroform, CHCl3, is 61.7Cand its enthalpy of vaporization is 31.4 kJ-mol 1Calculate the molar entropy of vaporization for chloroform The components of the behavioral skills training procedure are generally used: a) together in a training session b) with individuals who have severely limited abilities c) individually to teach different behaviors d) A and B use the formula for the sum of a geometric series to find the sum or state that the series diverges (enter div for a divergent series). =3[infinity]710 Solve: 7(s + 1) + 21 = 2(s - 6) - 20