The SPI bus requires an external clock signal to operate, and this signal is used to synchronize data transmission between devices. When designing a system that uses the SPI bus, it is important to provide a stable and accurate clock signal to ensure reliable communication.
Yes, the SPI bus needs an external clock signal to operate. The SPI bus, or Serial Peripheral Interface bus, is a communication protocol that is used to connect multiple devices together. This protocol requires a master device to initiate communication with a slave device, and the clock signal is used to synchronize the data transmission between the two devices.
The clock signal is typically generated by the master device and is sent to all of the slave devices on the bus. Each slave device uses the clock signal to determine when to send or receive data. Without this clock signal, the devices on the SPI bus would not be able to communicate with each other.
Therefore, if you are designing a system that uses the SPI bus, you will need to provide an external clock signal. This can be done using a dedicated clock generator circuit or by using a microcontroller with a built-in clock generator. It is important to ensure that the clock signal is stable and accurate to ensure reliable communication between the devices on the SPI bus.
Learn more on SPI bus here:
https://brainly.com/question/31749604
#SPJ11
The keyDown (code) block is used to write programs where a user can control sprites on
the screen.
O True
O False
Write the name kalia in a creative way in your own handwriting
"failed to login the authentication servers are currently not reachable" how to fix this problem ?
Complete this lab as follows:
Select RouterA.
Press Enter.
At the prompt, enter:RouterA>enableRouterA#config tRouterA(config)#interface s0/0/0RouterA(config-if)#encapsulation pppRouterA(config-if)#exitRouterA(config)#username RouterB password cisco
Press Ctrl + Z.
At the prompt, enter:RouterA#copy run start
Press Enter.
Press Enter to save your changes.
From the diagram, select RouterB.
Press Enter.
At the prompt, enter:RouterB>enableRouterB#config tRouterB(config)#interface s0/0/1RouterB(config-if)#encapsulation pppRouterB(config-if)#exitRouterB(config)#username RouterA password cisco
Press Ctrl + Z.
At the prompt, enter:RouterB#copy run start
Press Enter.
Press Enter to save your changes.
Once IP routing is enabled on the router, you can change the settings to suit your surroundings.
If you require instructions on configuring IP, consult the Cisco IOS IP Routing Configuration Guide's IP configuration chapters.
ipx routing
appletalk routing
!
interface Ethernet 1
ip address 10.1.1.1 255.255.255.0
appletalk cable-range 1-1 1.1
appletalk zone 1
ipx network 10 encapsulation snap
!
router igrp 1
network 10.1.0.0
!
end
!
#Catalyst5000
!
set VLAN 110 2/1
set VLAN 120 2/2
!
set trunk 1/1 110,120
# if 802.1Q, set trunk 1/1 nonegotiate 110, 120
!
end
!
Learn more about configuration here-
https://brainly.com/question/14307521
#SPJ4
what is cached data on my phone and can i delete i
Answer:
look below!
Explanation:
So, if cached data isn’t that important, is it safe to erase? Well, that depends.If you find your mobile device memory being drained from cached data, you should probably clear it. After all, cached data isn’t vital to the performance of an app or website; it just means the files on it will have to be reloaded.Although, constantly clearing your cache isn’t a permanent solution since you’ll eventually be reopening apps and revisiting websites at some point.
How to fix "the windows subsystem for linux instance has terminated"?
The W!ndows Subsystem for Linux instance has terminated" is an error message that can occur when using the Windows Subsystem for L!nux (WSL) on a W!ndows 10 machine. Some potential solutions to this issue include:
Restarting the computer: Sometimes, a simple restart can resolve the issue.Reinstalling WSL.Updating Windows.Running the command wsl --shutdown.Check if your Linux distro is not out of date.Uninstalling and then reinstalling WSL can fix any issues with the subsystem. Make sure that your W!ndows installation is up-to-date, and any updates that are available are installed. : This command is used to shut down all running Linux distros. It can be used to resolve the issue when the error message is due to a malfunctioning distro.
Learn more about fix problem, here https://brainly.com/question/20371101
#SPJ4
That does this formula do?
MAX(B3: B10)
O finds the largest value in the second row, from the cells in the third column to the tenth column
O finds the largest value in the second column, from the cells in the third row to the tenth row
O changes all the values to be
equal to the largest value in the second row, from the cells in the third column to the tenth column
O changes all the values to be equal to the largest value in the second column, from the cells in the third row to the tenth row
Select Decimal in the Allow box. Pick the limitation type you want by checking the appropriate box in the Data box.
How do I set a maximum value limit in Excel?A set of data that you specify is returned by Excel's MAX function at its maximum value. According to the syntax: (number1, [number2],...) where a reference to a cell or range that contains numbers, an array, a named range, or a numeric value can all be used to represent a number.
Select Decimal in the Allow box. Pick the limitation type you want by checking the appropriate box in the Data box. Select between, for instance, to define upper and lower bounds. Enter the desired figure, whether it be a minimum, maximum, or particular.
From any kind of numerical data, the MAX function can be used to return the highest value. For instance, MAX can yield the worst time in a race, the most recent date, the highest percentage, the hottest temperature, or the highest sales figure.
To learn more about maximum value refer to:
https://brainly.com/question/82347
#SPJ1
a digital computer uses mechanical operations to perform calculations
The given statement “A digital computer uses mechanical operations to perform calculations” is False.
A digital computer uses electronic circuits and transistors to perform calculations, rather than mechanical operations.
The electronic circuits and transistors work together to process and store information in a binary format, which allows the computer to perform mathematical operations and logical decisions at a very high speed.
The earliest computers used mechanical operations to perform calculations, such as the abacus and the mechanical calculator. But with advancements in technology, electronic computers have replaced these mechanical devices.
The first electronic computers emerged in the 1940s and 1950s, and they were much faster and more reliable than their mechanical predecessors.
To learn more about digital computer, click here:
brainly.com/question/18943642
#SPJ4
Which website most likely offers accurate, unbiased information that is relevant to research about serious efforts to reduce our dependence on foreign oil by addressing the way americans travel?.
The history of America's Booming Dessert Business; Museum of Culinary Arts; www.SCCuisineInstitute.org is the most likely website about the popularity of doughnuts in the United States.
What is a website?A website seems to be a collection of web pages related content identified by a common domain name and hosted on at least one web server. Websites are usually focused on a single topic or purpose, such as news, education, commerce, entertainment, or social networking.A website is a collection of web pages and associated content and data that is identified by a common place area call and hosted on at least one web server.The website is an internet-connected server where users can find whatever they are looking for. It is used all over the world for financial management, selling products, selling services, saving money, and so on.To learn more about website refer to :
https://brainly.com/question/28431103
#SPJ4
How to Fix The ""Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened."" Error?
Select Properties from the context menu of the Outlook.exe file, then the Compatibility tab. Uncheck any boxes that are selected on the Compatibility tab, then select Apply > OK. Relaunch Outlook.
What does the message Cannot start Microsoft Outlook imply signify?Outlook may display the "cant start Microsoft Outlook" error if your file is corrupted. To fix the error, you can repair the file. Using the Inbox Repair Tool, you can fix the Personal Storage Table file from Microsoft.
Why can't Outlook open my folders?Your folders won't be visible if the Folder Pane is minimized. The Folder Pane can be seen in two different ways. Clicking the > on the left side of the screen will expand the Folder Pane.
To know more about Microsoft Outlook visit:-
https://brainly.com/question/26695071
#SPJ4
8.12 LAB: Toll Calculation
You can calculate the tolls for your trip using the TollGuru Toll Calculator app. All you have to do is specify the source and destination, and Send. You can choose your vehicle type, electronic toll devices, departure time, and more. The mobile app (iOS or Android) is also available.
Truck Solutions HOS Truck Toll Calculator & State Mileage Report Toll Guru is a product of Map Up and reflects our mission to serve businesses of all sizes. MAPUP, INC. The total toll for a route is the toll for transponders at the toll plazas where your transponders work + cash cost (or license plate video fee) for locations where your transponders don't work. Submit route calculation. Simply enter your origin, destination, and submit to see tolls in seconds. Fill in the optional fields (mileage, toll tags, etc.) for more accurate results. Loading Please Wait... Electronic Toll Gantry Only Accepts Electronic Toll Devices Cash Accepting Toll Plaza Points Via Truck Restricted Routes How To Calculate Tolls - Tutorial.
To learn more about electronic click below:
brainly.com/question/938439
#SPJ4
What security issue is associated with compressed urls?
A security issue associated with compressed URLs is the potential for phishing attacks.
Compressed URLs, also known as "URL shortening". It is a technique used to shorten a long URL into a shorter one that is easier to share. Since compressed URLs often hide the true destination of the link, it can be difficult for users to verify the authenticity of the link and the website it leads to.
Phishers can take advantage of this by creating a compressed URL that looks legitimate, but actually redirects the user to a malicious website. The user, who may not be able to see the true destination of the link, may enter sensitive information such as login credentials or personal information on the fake website.
Another security issue with compressed URLs is that it can be hard to detect malware links, as the long link that points to a malicious website is shortened and it's hard to detect the malicious website.
It is important to note that not all link shortening services are reliable. Some of them may keep track of the links you click and share them with third-parties, which can be a privacy concern.
Therefore, before clicking on any compressed URL, it's important to verify the authenticity of the link and the website it leads to, and it's also recommended to use a service from a reputable provider.
Find more about compressed urls, using the link below:
brainly.com/question/24948181
#SPJ4
The major security issue associated with shortened or compressed URLs is that they are used to hide the intermediate or final destination URL with malicious intent, such as stealing sensitive information (phishing) or installing malware. For this reason, you always have to distrust the sender.
Compressed URLs risksA URL with a length that was shortened is used with the idea that the address of the web page is easier to remember, due to lack of space or to make it look more aesthetic. However, it also has many risks, such as:
Phishing attacks by redirecting us to a malicious website that supplants an entity or service.Malware download by redirecting us to a website from which malicious software or files will be downloaded to our devices.Know more about compressed URLs here:
https://brainly.com/question/24948181
#SPJ4
How can I fix the error of "Dot indexing is not supported for variables of this type" in the following code?
Answer:
You used GUIDE to construct these GUIs.
When you use GUIDE, then the "handles" structure that is passed into your function always refers to information stored against the figure that the graphic element is in. "handles" is not a global structure, it is a per-GUI structure, and you have constructed three separate GUI.
You need to change
set(handles.edit6,'string',fullname);
to
edit6 = findobj(0, 'tag', 'edit6');
set(edit6, 'string', fullname);
Explanation:
alr any genshin players, write an essay on the best raiden shogun builds for atk or crit dmg. or just comment^^
The Electro Archon from Genshin Impact is a powerful weapon with several uses. Here are some tips for maximizing Raiden Shogun's strength.
What is Raiden Shogun's ideal artifact build?Emblem of Severed Fate The Emblem of Severed Fate is the finest Artifact set for Raiden Shogun because its combination of Elemental Recharge and Elemental Burst DMG boosts perfectly matches her character design. The Noblesse Oblige set can enhance Baal's function for players who want to employ her as a support.
Which attributes are ideal for Raiden Shogun?However, they should give Raiden Shogun priority over the following artifact stats: Slot for a desired stat or artifact: The Flower of Life As much as feasible should be Energy recharge, Critical DMG, Critical Rate, and Atk in that order of importance.
To know more about Genshin Impact visit :-
https://brainly.com/question/29610885
#SPJ1
An SCM system coordinates all of the following functions except:
a. Procuring materials
b. Transforming materials into intermediate and finished products or services
c. Distributing finished products or services to customers
d. Advertising finished products to customers
The statement that's not coordinated a SCM is d. Advertising finished products to customers. Supply chain management is the process of delivering a product from raw material to the consumer.
Supply chain management contains supply planning, product planning, demand planning, sales and operations planning, and supply management. Supply chain management is critical because it can help gain several business objectives. For instance, it can be used to control manufacturing processes can decrease product quality, reducing the risk of recalls and lawsuits when helped to create a strong consumer brand. At the same time, controls over shipping procedures can increase customer service by avoiding costly shortages or periods of inventory oversupply. Supply chain management gives several benefits for companies to increase their profit margins and is especially crucial for companies with large and international operations.
Learn more about SCM, here https://brainly.com/question/29241738
#SPJ4
Actual data throughput is usually higher than the stated bandwidth True False
The declaration "actual data throughput is usually higher than the stated bandwidth" is definitely true.
What do you mean by Bandwidth?Bandwidth may be defined as the maximum amount of data that is often transmitted or transferred over an internet connection in a definite amount of time.
It is often mistaken for internet speed when it's actually the volume of information that can be delivered over a connection in an estimated amount of time. It is generally calculated in megabits per second (Mbps).
The bandwidth represents the specific amount of data that is generally transferred from one device to another over the internet. While the actual data is the gross amount of data that is included under the sent option and others which is not categorized in the delivered section.
Therefore, the declaration "actual data throughput is usually higher than the stated bandwidth" is definitely true.
To learn more about Bandwidth, refer to the link:
https://brainly.com/question/12908568
#SPJ2
Create Virtual Machines
You have installed Hyper-V on the CorpServer server. You are experimenting with creating virtual machines.
In this lab, your task is to create two virtual machines named VM1 and VM2. Use the following settings as specified for each machine:
VM1:
Virtual machine name: VM1
Virtual machine location: D:\HYPERV
Virtual machine generation: Generation 1
Startup memory: 1024 MB - Do not use Dynamic Memory
Networking connection: External
Virtual hard disk name: VM1.vhdx
Virtual hard disk location: D:\HYPERV\Virtual Hard Disks
Virtual hard disk size: 50 GB
Operating system will be install later
VM2:
Virtual machine name: VM2
Virtual machine location: D:\HYPERV
Generation: Generation 2
Startup memory: 2048 MB - Use Dynamic Memory
Networking connection: Internal
Virtual hard disk name: VM2.vhdx
Virtual hard disk location: D:\HYPERV\Virtual Hard Disks
Virtual hard disk size: 250 GB
Operating system will be install later
Minimum RAM: 512 MB
Maximum RAM: 4096 MB
To create the virtual machines:
1. Select the Hyper-V Manager from the Start menu.
2. On the Actions pane (right side of the window), click on the New > Virtual Machine link.
3. The "Before You Begin" window will appear. Click on the Next button.
4. The "Specify Name and Location" window will appear. Enter "VM1" as the name and select D:\HYPERV as the location. Click on the Next button.
5. The "Specify Generation" window will appear. Select Generation 1 and click on the Next button.
6. The "Assign Memory" window will appear. Enter 1024 MB and uncheck the box next to "Use Dynamic Memory for this virtual machine". Click on the Next button.
7. The "Configure Networking" window will appear. Select the "External" option and click on the Next button.
8. The "Connect Virtual Hard Disk" window will appear. Select the "Create a virtual hard disk" option, enter "VM1.vhdx" as the name, and select D:\HYPERV\Virtual Hard Disks as the location. Enter "50 GB" as the size and click on the Next button.
9. The "Installation Options" window will appear. Select "Install an operating system from a bootable CD/DVD-ROM" and click on the Next button.
10. The "Summary" window will appear. Review the settings and click on the Finish button.
11. On the Actions pane (right side of the window), click on the New > Virtual Machine link again.
12. The "Before You Begin" window will appear. Click on the Next button.
13. The "Specify Name and Location" window will appear. Enter "VM2" as the name and select D:\HYPERV as the location. Click on the Next button.
14. The "Specify Generation" window will appear. Select Generation 2 and click on the Next button.
15. The "Assign Memory" window will appear. Enter 2048 MB and check the box next to "Use Dynamic Memory for this virtual machine". Click on the Next button.
16. The "Configure Networking" window will appear. Select the "Internal" option and click on the Next button.
17. The "Connect Virtual Hard Disk" window will appear. Select the "Create a virtual hard disk" option, enter "VM2.vhdx" as the name, and select D:\HYPERV\Virtual Hard Disks as the location. Enter "250 GB" as the size and click on the Next button.
18. The "Dynamic Memory" window will appear. Enter "512 MB" as the minimum RAM and "4096 MB" as the maximum RAM and click on the Next button.
19. The "Installation Options" window will appear. Select "Install an operating system from a bootable CD/DVD-ROM" and click on the Next button.
20. The "Summary" window will appear. Review the settings and click on the Finish button.
The two virtual machines, VM1 and VM2, have been successfully created.
The Basketballplayer class was created so that we can track different stats.
It was designed to add players then add a game's statistics and report out.
Take a few minutes to check out the Basketbiplayer class. Note how you
can construct a Basketballplayer and how you can add a game's statistics.
Your task:
Create two basketball players, one with a team, one without a team.
Add at least 4 games to each player
Print out the player's name, their statistics, and then print the object
It was designed to add players then add a game's statistics and report out. Take a few minutes to check out the Basketbiplayer class. Note how you can construct a Basketballplayer and how you can add a game's statistics.
What are Statistics?The study of statistics focuses on gathering, organizing, organizing, analyzing, interpreting, and presenting data. It is customary to start with a statistical population or a statistical model to be researched when using statistics to a scientific, industrial, or societal issue. Populations can refer to a variety of groupings of individuals or things, such as "every individual living in a nation" or "each atom making up a crystal." Every facet of data, including the organization of data collecting in terms of the layout of surveys and experiments, is covered by statistics. When census data cannot be gathered, statisticians devise specialized experiment designs or survey samples to get data. A representative sample ensures that generalizations and inferences from the sample to the entire population are reasonable.
To know more about Statistics visit:
https://brainly.com/question/10079692
#SPJ4
It was made to add participants, add game data, and then report results. Consider out all the Basketbiplayer class for a little while.
What does OOP's class and object mean?In a programme, a class serves as a template for the creation of objects, whereas an object is an example of a class. An item is a physical entity, but a class is a conceptual one. Memory space is not allocated by a class; nevertheless, it is allocated by an object.
What distinguishes a Java object from a Java class?A class instance is an object. A classes is a framework or model that may be used to create new objects. An object such as a pen, computer, phone, mattress, mouse, mouse, chair, etc. is a real-world thing.
To know more about object visit:
https://brainly.com/question/29976600
#SPJ4
For this brand, develop the service blueprint for subscription (for live streaming platform of your choosing) or ordering (for the restaurant of your choosing)
Customer interaction: The customer journey is mapped in the service blueprint from the perspective of the customer. The first step is to determine the stages of a customer's visit to a restaurant.
A service blueprint is a graphic that shows the connections between various service elements, including people, props (physical or digital evidence), and processes, that are directly connected to touchpoints in a particular customer journey. Consider service plans to be the second phase of customer journey maps. A service plan creates a detailed road map for accomplishing operational goals. Its cross-functionality enhances communication within the business between management, staff, and customers. By keeping service delivery straightforward and redundant, it enables businesses to comprehend their clients' needs and adjust accordingly.
Learn more about communication here-
https://brainly.com/question/29338740
#SPJ4
9.9 LAB: Find Student With Highest GPA
To find the Student With Highest GPA with the coding the below code will show the output:
// Importing libraries
#include <stdio.h> #include <string.h>
// Importing customer header files
#include "Student.h"
#include "Course.h" // Driver Code int main() { // Initializing course Course course = InitCourse(); // Initializing Students Student student1 = InitStudent("Henry", "Nguyen", 3.5);
Student student2 = InitStudent("Brenda", "Stern", 2.0);
Student student3 = InitStudent("Lynda", "Robinson", 3.2);
Student student4 = InitStudent("Sonya", "King", 3.9); // Adding students to the course
course = AddStudent(student1, course);
course = AddStudent(student2, course);
course = AddStudent(student3, course);
course = AddStudent(student4, course); // Finding student with the highest gpa
Student student = FindStudentHighestGPA(course); // Printing the top student
printf("Top Student: %s %s (GPA: %.1lf)\n", student.first, student.last, student.gpa);
return 0; }
Learn more about Code here:
https://brainly.com/question/17293834?
#SPJ4
the trust relationship between this workstation and the primary domain failed
The "trust relationship between this workstation and the primary domain failed” error occurs when the computer has been removed from the domain and is no longer recognized by the domain controller.
When a computer is joined to a domain, it stores a hashed version of the domain administrator's password. The computer uses this password to authenticate with the domain controller during login.
When the computer is removed from the domain, the domain controller removes the computer from its records and invalidates the hashed password.
When the user attempts to log back in, the computer is no longer recognized by the domain controller, causing the "trust relationship between this workstation and the primary domain failed” error.
To resolve this issue, the user must re-join the computer to the domain using the domain administrator's account. Once this is done, the computer will be re-authenticated and the user should be able to log in normally.
For more questions like Trust relationship click the link below:
https://brainly.com/question/14369330
#SPJ4
Complete question is given below:
The “trust relationship between this workstation and the primary domain failed” error means that?
According to the Sans Institute, the number-one cyber threat is:
The most significant online danger, according to the Sans Institute, is posed by more sophisticated internet attacks that take advantage of flaws in web browsers. Typical corporate software programmes are most frequently linked to macro infections.
What person, group, or company poses the biggest threat in the online world?The populace. Cyber operations are most vulnerable to human beings. They are especially exposed to these many hazards since so many individuals regularly use social media and conduct business online.
What three levels of cyber threat intelligence are there?Tactical, operational, and strategic cyber threat intelligence are the three categories under which it is divided. The technical signs and behaviours that are utilised to guide network level action and remediation are categorised by CTI under a third heading called tactical.
To know more about internet attacks visit :-
https://brainly.com/question/20376509
#SPJ4
Give five (5) tips on how to identify credible sources on the internet. (5pts)
1. Look for sources with authors or organizations that are experts in the field.
2. Check the source’s domain name.
3. Look for sources with a good reputation.
4. Check the source’s date of publication.
5. Look for sources with citations and references.
Which statement will help the architect articulate the value of the Multiparty Systems practice?
"It an enables the usage of alternative versions for comparable data for the different organizations," will help the architect articulate the value of the Multiparty Systems practice.
What are the advantages of a multi-party system like Blockchain?Multi-party systems are crucial for company operations but can be challenging. Blockchain helps build confidence in multi-party systems by enabling transparency, decentralized control, and an immutable record of transactions, which enhances security and responsibility between participants.
What function does the multi-party system serve?A multi-party system prohibits the leadership of one party from unchallenged control of one legislative chamber. A two-party system is one in which there are only two parties that can win an election.
To know more about architect visit:-
https://brainly.com/question/24444566
#SPJ4
A system Unit consists of the keyboard and the monitor.
TRUE OR FALSE
Which of the following decision problems are undecidable?I. Given NFAs N1 and N2, is L(N1) ∩ L(N2) = ϕ?II. Given a CFG G = (N, ∑, P, S) and a string x ∈ ∑*, does x ∈ L(G)?III. Given CFGs G1 and G2, is L(G1) = L(G2)?IV. Given a TM M, is L(M) = ϕ?
The correct answer is Emptiness problem of Turing machine is undecidable.Uncountable noun (mptins). Emptiness is an unpleasant or unsettling sensation that nothing is valuable.
The Turing machine's emptiness issue cannot be solved, according to Rice's theorem. Keep in mind that any NP problem can be solved. This idea is crucial. Keep in mind that P issues also fulfil the NP specification, therefore... Some NP-Hard issues can also be found in NP. In the theory of computation, undecidable issues are those for which we are unable to create an algorithm that can resolve the issue in an unlimited amount of time (TOC). If a Turing machine cannot determine a problem's solution in an indefinite length of time, then the problem cannot be resolved.
To learn more about machine click the link below:
brainly.com/question/2641843
#SPJ4
Any data entering a digital device could be malware.
True or False
Answer: False
Explanation:
The given statement "Any data entering a digital device could be malware." is true.
The given statement is "Any data entering a digital device could be malware."
Any data entering a digital device could be malware. Blacklist and header filtering are usually performed by email clients and Webmail services. The objective of a MITM attack is for a third party to block communications between two entities. Most mass-mailing databases are legitimately compiled from customer lists.
Any risky computer programme on a computer or mobile device is now referred to as "malware," a phrase that combines the terms "malware" and "software."
Therefore, the given statement is true.
Learn more about the malware here:
https://brainly.com/question/29786858.
#SPJ6
Computer speed is measured in . The computer processor speed is 4.5 GHz, which means the processor performs at 4.5 machine cycles per second. The CPU is responsible for
Computer speed is measured in Gigahertz (GHz). The computer processor speed is 4.5 GHz, which means the processor performs at 4.5 billion machine cycles per second. The CPU is responsible for controlling all computer functions.
What is the function of the CPU?The function of the CPU may include guiding the computer through the various steps of solving a problem. Data enters the computer through an input unit, is processed by the central processing unit, and is then made available to the user through an output unit.
The speed of a computer is measured in machine cycles per second or MHz. A computer's processor clock speed determines how quickly the central processing unit (CPU) can retrieve and interpret instructions. This helps your computer complete more tasks by getting them done faster.
To learn more about CPU, refer to the link;
https://brainly.com/question/474553
#SPJ1
Marcus needs to add a query for multiple tables in his database. He is using access 2016. Which tab should he use to add the query?.
In Microsoft Access 2016, Marcus should use the "Create" tab and select "Query Design" to add a query for multiple tables in his database. The concept used to answer this question is called "query design" in Microsoft Access.
A query is a request for data from a database table or combination of tables. In Access, a query can be created using the Query Design view, which allows the user to visually select the columns and rows from multiple tables to include in the query, specify any criteria for filtering the data, and even make calculations using the data. The query can then be run to retrieve the desired data, which can be displayed in a table or form, or used to create a report.
Learn more about the query, here https://brainly.com/question/29575174
#SPJ4
Cloud computing provides the IT infrastructure that enables service orientation.
True or False?
"Cloud computing provides the IT infrastructure that enables service orientation". This statement is true (T).
Cloud computing is a model of delivering IT services over the internet, where the user can access and use shared resources, software, and information on demand without having to own and manage the underlying infrastructure. This allows organizations to access and use resources, such as servers, storage, and software, as a service. This service-oriented approach enables organizations to scale resources up or down as needed, pay only for what they use, and quickly adapt to changing business needs.
This flexibility and scalability provided by cloud computing enables organizations to focus on their core competencies and achieve business goals rather than spending time and resources managing IT infrastructure.
Learn more about cloud computing here: brainly.com/question/19057393
#SPJ4