The sum of all the potential energy and kinetic energy is an object is equal to its______

due today pls help! :(

Answers

Answer 1

Answer:

total mechanical energy


Related Questions

8. Which statement is best supported by the data shown?
A) An iron nail contains fluorite.
B) A streak plate is composed of quartz.
C) Topaz is harder than a steel file.
D) Apatite is softer than a copper penny.

Answers

The statement that is best supported by the data shown is this: C) Topaz is harder than a steel file.

What is the best supporting statement?

The best supporting statement is the one that shows that Topaz has a higher hardness rating when compared to a steel file.

In the depiction, Topaz is shown as having a hardness rating of 8 while the steel file has an approximate hardness of 6.5. So, the right conclusion to reach is that Topaz is harder than a steel file.

Learn more about hardness here:

https://brainly.com/question/30322659

#SPJ1

I need help with this please fast

Answers

4) The volume of the HCl used is 9.500 mL while the volume of the NaOH used is 3.800 mL.

5) Molarity of sodium hydroxide is obtained from; Molarity of HCl * 1/2

What is titration?

By reacting an unknown component with a known quantity of a different chemical known as a titrant, titration is a laboratory procedure used to measure the concentration of an unknown substance, often a solute dissolved in a liquid.

The endpoint of a titration can be detected in a number of ways, depending on the specific titration being performed.

4)

Volume of the Acid used = Initial reading - Final reading = 25.00 - 15.50 = 9.500 mL

Volume of the base used = 8.80 - 5.00 = 3.800 mL

5)

We know that the mole ratio is 1:2 and the implication of this is that the set up to obtain the molarity of the sodium hydroxide solution is Molarity of HCl * 1/2

Learn more about titration:https://brainly.com/question/31271061

#SPJ1

Imagine that the earth's axis of rotation changed so that the same spot (red circle) received the same amount of light in the winter and in the summer. What effect might that change have on the temperature in that spot?

Answers

Answer: the temperature would increase

Explanation:

because if one spot on the earth got the same amount of light through the summer and winter it would have a severe amount of drought and nothing to cool it down since all off it evaperated

An atom of sodium-23 (Na-23) has a net charge of . Identify the number of protons, neutrons, and electrons in the atom. Then, explain how you determined the number of each type of particle. use the periodic table to help you.

Answers

Answer:

Protons - 11

Neutrons - 12

Electrons - 11

Step-by-step:

An atom of sodium-23 (Na-23) has a net charge of 0 because it is a neutral atom.

To determine the number of protons, neutrons, and electrons in Na-23, we can use its atomic number and mass number. The atomic number of sodium is 11, which means that a neutral sodium atom has 11 protons in its nucleus. The mass number of Na-23 is 23, which means that its nucleus contains 23 particles (protons and neutrons) in total.

To find the number of neutrons in Na-23, we can subtract the number of protons (which is 11) from the mass number (which is 23). Therefore, Na-23 has 23 - 11 = 12 neutrons.

Since Na-23 is a neutral atom, the number of electrons must also be 11. This is because in a neutral atom, the number of electrons is equal to the number of protons.

So to summarize, the number of protons, neutrons, and electrons in Na-23 are 11, 12, and 11, respectively. We determined the number of protons and electrons from the atomic number of sodium (which is 11), and the number of neutrons from the difference between the mass number (which is 23) and the atomic number (which is also 11).

Hope this helps!

How many grams of NaOH are needed to make 100. mL of solution with a concentration of 1.5 M?

Answers

To create 100 mL of solution with a concentration of 1.5 M, 6.00 grams of NaOH are required.

The amount of NaOH needed to make 100. mL of solution with a concentration of 1.5 M can be calculated using the formula:

mass = molarity x volume x molar mass

where:

molarity = 1.5 M (given)

volume = 100. mL = 0.1 L (given)

molar mass of NaOH = 40.00 g/mol (from periodic table)

Substituting the values, we get:

mass = 1.5 mol/L x 0.1 L x 40.00 g/mol

mass = 6.00 g

Therefore, 6.00 grams of NaOH are needed to make 100. mL of solution with a concentration of 1.5 M.

To know more about the Solution, here

https://brainly.com/question/14296204

#SPJ1

The relative formula masses (Mr) are: CaCo3 = 100; CaO =56 ; Co2=44
describe how this experiment could be used to provide evidence for the law of conservation of mass.

[6 marks]
include your answer:

-method

-which measurements should eb taken

-how the student could show evidence for the conservation for mass

Answers

The law of conservation of mass states that in a chemical reaction, the total mass of the reactants is equal to the total mass of the products. An experiment involving the thermal decomposition of calcium carbonate ([tex]CaCO_3[/tex]) can provide evidence for this law.

Method:

A sample of calcium carbonate is heated strongly in a crucible or test tube, causing it to decompose into calcium oxide (CaO) and carbon dioxide ([tex]CO_2[/tex]) gases. The reaction can be represented by the following chemical equation:

[tex]CaCO_3(s) = CaO(s) + CO_2(g)[/tex]

Measurements:

The mass of the empty crucible or test tube is first measured and recorded. A known mass of calcium carbonate is added to the crucible or test tube, and the combined mass is measured and recorded. The crucible or test tube containing the calcium carbonate is then heated strongly, and the mass of the products (calcium oxide and carbon dioxide) is measured and recorded.

Evidence for conservation of mass:

If the law of conservation of mass is true, the total mass of the products should be equal to the total mass of the reactants. In this experiment, the mass of the calcium oxide and carbon dioxide produced should add up to the mass of the calcium carbonate that was originally used.

To show evidence for the conservation of mass, the student could calculate the mass of the products by subtracting the mass of the empty crucible or test tube and the mass of the remaining calcium oxide (if any) from the combined mass of the crucible or test tube and the calcium carbonate.

If the calculated mass of the products is equal to the mass of the reactants, then the law of conservation of mass has been demonstrated.

For more question on  click on

https://brainly.com/question/24783543

#SPJ11

Suppose you were doing a titration where you start out with a basic solution of around 8.0 and you expect to keep adding an acid until the mixture has a pH of 3.0. Based on the indicator chart which pH indicator would be the best one to use. Describe the color change that would be observed

Answers

Based on the indicator chart, the pH indicator that would be the best one to use would be Thymol Blue.

The color change would be from light blue to yellow to orange.

Why is this pH indicator best ?

Thymol blue would be best because it would show you where your starting point is and then when you reach the desired pH value of 3. 0. Looking at the indicator chart, Thymol blue has a color of light blue between 8. 0 and 9. 0 so you will know you are at 8. 0 when the reaction starts.

As you add more acid, the color would move to yellow to let you know that it is getting more acidic. Once it reaches orange, the titration should stop.

Find out more on pH indicators at https://brainly.com/question/29584301

#SPJ1

Question 4 of 10
In what way does the shape of a molecule affect how the molecule is
involved with living systems?
OA. It determines what elements are in the molecule.
OB. It determines oxidation states present in the molecule.
OC. It determines how the molecule functions.
OD. It determines the weight of the molecule.
SUBMIT

Answers

The shape of a molecule determines how the molecule functions.

Energy
4p
3d
4s
3p
3s
2p
2s
1s

Answers

Answer:

Energy

4p ⇵ ⇵ ⇵

3d ⇵ ⇵ ⇵ ⇵ ⇵

4s ⇵

3p ⇵ ⇵ ⇵

3s ⇵

2p ⇵ ⇵ ⇵

2s ⇵

1s  ⇵

Draw the orbital Diagram

Answers

The orbital diagram of the compound has been shown in the  image attached.

What is the orbital diagram of a molecule?

The configuration of the molecular orbitals (MOs) within a molecule is shown in an orbital diagram of the molecule. Atomic orbitals from different molecules' individual atoms overlap to create molecular orbitals. According to the rules of quantum physics, electrons can fill these molecular orbitals.

Each chemical orbital is depicted in an orbital diagram by a line or a box, and the electrons are shown as arrows. The arrow's direction—upward for "spin up" and downward for "spin down"—indicates the spin of the electron.

Learn more about orbital diagram:https://brainly.com/question/14487703

#SPJ1

I need help solving this problem can anybody help thank you.

Answers

The system will react by changing the concentrations to restore equilibrium when the CO and CO2 concentrations in the chemical equation 2CO + O2 2CO2 are raised. The system will try to reduce the rise in CO and CO2 by moving the reaction towards the products side, in accordance with Le Chatelier's concept.

The reaction will go forward as the CO concentration rises, eating part of the extra CO and turning it into CO2. This change lowers the excess CO concentration and aids in reestablishing equilibrium.

However, since CO2 is already a product, its concentration does not have a direct impact on the reaction. However, to keep the stoichiometric balance, it can result in a somewhat greater concentration of CO.

Learn more about le chatlier principles at:

https://brainly.com/question/14967447

#SPJ1

chemical reaction for copper carbonate

Answers

Answer:

copper cu++

carbonate co3--

reaction=cuco3

How are alleles and traits related?
A. Traits are segments of DNA that code for alleles, which are the
observable characteristics in an organism.
B. Alleles are the inherited characteristics that are seen through
different gene combinations.
C. Traits are characteristics inherited from parents, while alleles are
caused by the environment.
O D. Alleles are distinct versions of genes, and they code for traits,
which are distinct forms of characteristics.

Answers

Alleles and traits related as D. Alleles are distinct versions of genes, and they code for traits, which are distinct forms of characteristics.

Alleles and traits are closely related in terms of genetics and inheritance. Alleles are alternative forms of a gene that occupy the same locus on a chromosome. They represent different variations of a specific gene. Traits, on the other hand, are the observable characteristics or features of an organism that are determined by the combination of alleles.

Each individual inherits two alleles for a particular gene, one from each parent. These alleles can be the same (homozygous) or different (heterozygous). The combination of alleles determines the expression of traits in an organism. For example, in the case of eye color, the gene may have alleles for blue and brown eye color. An individual may inherit two blue alleles (homozygous), resulting in the trait of blue eyes, or they may inherit one blue and one brown allele (heterozygous), resulting in the trait of brown eyes. In summary, alleles are distinct versions of genes, and they code for the different variations of traits or characteristics that are observed in organisms. The correct answer is D. Alleles are distinct versions of genes, and they code for traits, which are distinct forms of characteristics.

for more questions on Alleles
https://brainly.com/question/16684263
#SPJ11

2 NaN3 → 2 Na + 3 N
Given 9.98 grams of N2, how many moles of NaN3 are produced?​

Answers

0.238 moles of NaN₃ are produced from 9.98 grams of N₂.

What is the moles of NaN₃ produced?​

The moles of he mass of NaN₃ produced

The balanced equation for the reaction is:

2 NaN₃ → 2 Na + 3 N₂

The molar ratio between NaN₃ and N₂ is 2:3, which means that for every 2 moles of NaN₃, 3 moles of N₂ are produced.

The mole ratio is used to determine how many moles of NaN₃ are produced from 9.98 grams of N₂.

First, we need to convert the mass of N₂ to moles:

moles of N₂ = mass of N2 / molar mass of N₂

moles of N₂ = 9.98 g / 28.02 g/mol

moles of N₂ = 0.356 mol

moles of NaN₃ = (2/3) * moles of N₂

moles of NaN₃ = (2/3) * 0.356 mol

moles of NaN₃ = 0.238 mol

Learn more about mass at: https://brainly.com/question/16934894

#SPJ1

The following are electronic configurations of five elements. A= 2,8,2 B= 2,8,6 C= 2,8,8 D= 2,8,7 E= 2,8,3 (a) Which element is unlikely to react with the others? (b) Which elements will react to form covalent compounds? (c) Which elements will react to form ionic solids? Give the common valency of the elements when they form ionic solids. Which of these bonds is the weakest: ionic bond; covalent bond; hydrogen bond?​

Answers

(a) Element C (2,8,8) is unlikely to react with the others.

(b) Elements D (2,8,7) and E (2,8,3) will likely react to form covalent compounds.

(c) Elements A (2,8,2) and B (2,8,6) will likely react to form ionic solids.

(a) It has a complete outer electron shell (valence shell) with eight electrons, fulfilling the octet rule. This stable configuration makes element C less likely to undergo chemical reactions and form compounds.

(b) Covalent compounds involve the sharing of electrons between atoms, typically nonmetals. Both D and E have incomplete outer electron shells and can form covalent bonds by sharing electrons with other elements.

(c) Ionic compounds involve the transfer of electrons from one atom to another, typically between metals and nonmetals. When A and B form ionic solids, they will achieve a stable electron configuration by losing or gaining electrons, respectively.

Element A would lose two electrons to achieve a stable configuration, resulting in a valency of +2. Element B would gain two electrons, resulting in a valency of -2.

The weakest bond among ionic, covalent, and hydrogen bonds is the hydrogen bond. Hydrogen bonds are relatively weaker than ionic and covalent bonds. They occur when a hydrogen atom with a partial positive charge interacts with an electronegative atom, such as oxygen or nitrogen, with a partial negative charge.

Hydrogen bonds are important in various biological and chemical processes, but they are weaker compared to the strong bonds formed in ionic and covalent compounds.

For more such questions on covalent compounds.

https://brainly.com/question/27389028

#SPJ11

How many How many molecules are there in 265 grams of FeF^3?
a. 1.1 x 1023
b. 1.3 x 1023
c. 1.4 x 1024
d. 2.8 x1024
2. How many molecules are there in 98 grams of FeF^3?
a. 1.4 x 1023
b. 5.2 x 1023
c. 1.4 x 1024
d. 5.2 x 1024
3. How many atoms are there in 6.2 grams of silver?
a. 1.2 x 1022
b. 3.5 x1022
c. 1.2 x1023
d. 3.5 x 1023
4. How many atoms are there in 54.2 grams of Manganese?
a. 5.9 x 1023
b. 1.3 x 1024
c. 5.9 x1024
d. 1.3 x 1025
. How many molecules are there in 250 grams of Cu(NO3)2?
a. 8.0 x 1022
b. 1.4 x 1023
c. 8.0 x 1023
d. 1.4 x 1024
How many grams are in 6.2 × 1024 molecules of water?
a. 16.5 grams
b. 18.5 grams
c. 165.3 grams
d. 185.3 grams
7. How many grams are in 2.3 x 1023 molecules of NO3?
a. 23.7 grams
b. 46. 2 grams
c. 237 grams d.
d. 462 grams
8. How many grams are in 9.7 x 1023 atoms of selenium?
a. 12.7 grams
b. 62.3 grams
c. 127.3 grams
d. 623 grams
9. How many grams are in 3.4 x 1024 atoms of osmium?
a. 52.2 grams
b. 107.4 grams
c. 203.7 grams
d. 410. 1 grams
10. How many grams are in 11 x 1022 molecules of oxygen?
a. 2.9 grams
b. 5.8 grams
c. 0.3 grams
d. 0.6 grams

Answers

The masses, moles, and number of molecules are as follows:

1. c. 1.4 x 10²⁴

2. b. 4.214 x 10²³ molecules

3. a. 1.2 x 10²²

4. a. 5.9 x 10²³

5. c. 8.0 x 10²³

6. d. 185.3 grams.

7.  a. 23.7 grams

8. c. 127.3 grams

9. No answer in the option

10. a. 2.9 grams

What is the number of molecules?

To determine the number of molecules in 265 grams of FeF₃:

First, calculate the number of moles of FeF₃:

moles = mass / molar mass

moles = 265 g / 139.839 g/mol

moles = 1.8939 mol

number of molecules = moles * Avogadro's number

number of molecules = 1.8939 mol * 6.022 x 10²³ molecules/mol

number of molecules = 1.138 x 10²⁴ molecules

2. To determine the number of molecules in 98 grams of FeF₃:

moles = 98 g / 139.839 g/mol = 0.7001 mol

number of molecules = 0.7001 mol * 6.022 x 10²³ molecules/mol

number of molecules = 4.214 x 10²³ molecules

3. To determine the number of atoms in 6.2 grams of silver:

moles = 6.2 g / 107.8682 g/mol = 0.0574 mol

number of atoms = 0.0574 mol * 6.022 x 10²³ atoms/mol

number of atoms = 3.457 x 10²² atoms

4. To determine the number of atoms in 54.2 grams of Manganese:

moles = 54.2 g / 54.938045 g/mol = 0.9876 mol

number of atoms = 0.9876 mol * 6.022 x 10²³ atoms/mol

number of atoms = 5.947 x 10²³ atoms

5. To determine the number of molecules in 250 grams of Cu(NO₃)₂:

moles = 250 g / (63.546 g/mol + 2 * 14.007 g/mol + 6 * 16.00 g/mol) = 250 g / 187.56 g/mol = 1.333 mol

number of molecules = 1.333 mol * 6.022 x 10^23 molecules/mol

number of molecules = 8.027 x 10^23 molecules

6. To determine the mass in grams of 6.2 x 10²⁴ molecules of water:

moles = (6.2 x 10²⁴ molecules) / (6.022 x 10²³ molecules/mol)

moles = 10.29 mol

mass = moles * molar mass

mass = 10.29 mol * 18.00 g/mol)

mass = 185.3 grams

7. To determine the mass in grams of 2.3 x 10²³ molecules of NO₃:

moles = (2.3 x 10²³ molecules) / (6.022 x 10²³ molecules/mol)

moles = 0.382 mol

mass = moles * molar mass

mass = 0.382 mol * (14.007 g/mol + 3 * 16.00 g/mol) = 23.7 grams

8. To determine the mass in grams of 9.7 x 10²³ atoms of selenium:

moles = (9.7 x 10²³ atoms) / (6.022 x 10²³ atoms/mol)

moles = 1.61 mol

mass = moles * molar mass

mass = 1.61 mol * 78.9718 g/mol = 127.3 grams

9. To determine the mass in grams of 3.4 x 10²⁴ atoms of osmium:

moles = (3.4 x 10²⁴ atoms) / (6.022 x 10²³ atoms/mol)

moles = 5.64 mol

mass = moles * molar mass

mass = 5.64 mol * 190.23 g/mol

mass = 1074.8 grams

10. To determine the mass in grams of 11 x 10²² molecules of oxygen:

moles = (11 x 10^22 molecules) / (6.022 x 10²³ molecules/mol)

moles = 0.182 mol

mass = moles * molar mass

mass = 0.182 mol * 16.00 g/mol

mass = 2.9 grams

Learn more about the number of molecules at: https://brainly.com/question/30193523

#SPJ1

Name a liquid substance that could be used in the laboratory for dissolving dry mortar on floor tiles

Answers

One liquid substance that could be used in the laboratory for dissolving dry mortar on floor tiles is hydrochloric acid (HCl). Hydrochloric acid is a strong acid commonly used in laboratories for various purposes, including cleaning and dissolving mineral deposits.

When dry mortar, which is primarily composed of cement, hardens on floor tiles, it can be challenging to remove using traditional cleaning methods. However, hydrochloric acid can effectively dissolve and break down the cementitious components of the mortar.

It is important to note that when using hydrochloric acid, proper safety precautions should be followed, such as wearing protective gloves, goggles, and working in a well-ventilated area.

Additionally, it is crucial to dilute the hydrochloric acid to an appropriate concentration for the specific task, as using it undiluted can cause damage to the tiles or other surfaces.

For more such questions on laboratory

https://brainly.com/question/29455421

#SPJ11

What is the energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H?

Substance Mass (u)
4He 4.00260
3H 3.01605
1H 1.00783

Answers

The energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H is -2.982 x 10⁻¹⁰ J.

The given masses of the isotopes can be converted to kilograms using the conversion factor: 1 u = 1.661 x 10⁻²⁷ kg.

Mass of 4He = 2.55 g = 2.55 x 10⁻³ kg

Mass of 3H = 3.01605 u = 3.01605 x 1.661 x 10⁻²⁷ kg/u

= 5.0099 x 10⁻²⁷ kg

Mass of 1H = 1.00783 u = 1.00783 x 1.661 x 10⁻²⁷ kg/u

= 1.6737 x 10⁻²⁷ kg

The balanced equation for the fusion reaction is;

3H + 1H → 4He

The molar mass of 4He is 4.0026 g/mol, which can be converted to kg/mol using the conversion factor: 1 g/mol = 1 x 10⁻³ kg/mol.

Molar mass of 4He = 4.0026 g/mol = 4.0026 x 10⁻³ kg/mol

The number of moles of 4He formed can be calculated from its mass;

n(4He) = m(4He) / M(4He)

= 2.55 x 10⁻³ kg / 4.0026 x 10⁻³ kg/mol

= 0.638 mol

From the balanced equation, 3 moles of H atoms react with 1 mole of He atoms to form 1 mole of He atoms. Therefore, the number of moles of H atoms required for the reaction is;

n(H) = 3/4 x n(4He)

= 3/4 x 0.638 mol

= 0.479 mol

The energy released in the reaction can be calculated using the mass-energy equivalence equation;

E = Δm c²

where Δm is change in mass, c is the speed of light.

The change in mass is;

Δm = [3H + 1H - 4He] = [5.0099 x 10⁻²⁷ kg + 1.6737 x 10⁻²⁷kg - 4.0026 x 10⁻³ kg]

= -3.315 x 10⁻²⁷ kg (negative because mass is lost in the reaction)

The energy released is;

E = (-3.315 x 10⁻²⁷ kg) c²

= (-3.315 x 10⁻²⁷ kg) (2.998 x 10⁸ m/s)²

= -2.982 x 10⁻¹⁰ J

The negative sign indicates that energy is released in the reaction (exothermic reaction).

Therefore, the energy associated is -2.982 x 10⁻¹⁰ J.

To know more about fusion here

https://brainly.com/question/16556922

#SPJ1

What Is the ph of a solution where [h30+]3.5*10-3=

Answers

The pH of the solution with a [H₃O⁺] concentration of 3.5 * 10^(-3) mol/L is approximately 2.456.

To determine the pH of a solution based on the concentration of H₃O⁺, you can use the equation:

pH = -log[H₃O⁺]

Given that [H₃O⁺] = 3.5 * 10^(-3) mol/L, we can substitute this value into the equation:

pH = -log(3.5 * 10^(-3))

To evaluate this using a calculator or math software:

pH ≈ -log(3.5 * 10^(-3)) ≈ -(-2.456) ≈ 2.456

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

A 25 L sample of oxygen gas (O2) has a mass of 48 grams and a pressure of 3.0 atm. What would be the temperature of the sample? Reminder: Use the equation PV=nRT, with the constant R = 0.0821 L atm/mol K.
A.
609 K

B.
305 K

C.
19.0 K

D.
1.60 x 10-2 K

Answers

The temperature of the oxygen gas sample is 609 K, which is approximately 336°C or 637°F. The answer is A.

We can use the ideal gas law equation, PV = nRT, to solve for the temperature of the oxygen gas sample.

First, we need to calculate the number of moles of oxygen gas present in the sample using its mass and molar mass:

n = m/M

where:

n = number of moles

m = mass (in grams)

M = molar mass (in g/mol)

The molar mass of oxygen gas (O2) is 32.00 g/mol.

n = 48 g / 32.00 g/mol = 1.50 mol

Next, we can rearrange the ideal gas law equation to solve for temperature (T):

T = (PV) / (nR)

where:

T = temperature (in Kelvin)

P = pressure (in atm)

V = volume (in liters)

n = number of moles

R = gas constant (0.0821 L atm/mol K)

Plugging in the given values, we get:

T = (3.0 atm x 25 L) / (1.50 mol x 0.0821 L atm/mol K)

T = 609 K

For more question on temperature click on

https://brainly.com/question/4735135

#SPJ11

An ideal gaseous reaction (which is a hypothetical gaseous reaction that conforms to the laws governing gas behavior) occurs at a constant pressure of 35.0 atm and releases 71.8 kJ of heat. Before the reaction, the volume of the system was 7.00 L
After the reaction, the volume of the system was 2.60 L Calculate the total internal energy change, ΔE , in kilojoules.
Express your answer with the appropriate units.

Answers

When, the volume of the system was 2.60 L. Then, the total internal energy change is -71.8 kJ.

We can use the first law of thermodynamics to find the total internal energy change;

[tex]Δ_{E}[/tex] = q + w

where q is the heat transferred to or from the system and w is the work done on or by the system. At constant pressure, work done is given by;

w = -P[tex]Δ_{V}[/tex]

where P is pressure and [tex]Δ_{V}[/tex] is change in volume.

Using the given values, we have:

q = -71.8 kJ (since heat is released)

P = 35.0 atm = 3.56×10⁶ Pa (using the conversion factor 1 atm = 101325 Pa)

[tex]Δ_{V}[/tex] = 7.00 L - 2.60 L = 4.40 L = 4.40×10⁻³ m³ (using the conversion factor 1 L = 10⁻³ m³)

Therefore,

w = -P[tex]Δ_{V}[/tex]= -(3.56×10⁶ Pa)(4.40×10⁻³ m³) = -15.7 J

= -1.57×10⁻² kJ

Thus, the total internal energy change is;

[tex]Δ_{E}[/tex] = q + w = (-71.8 kJ) + (-1.57×10⁻² kJ)

= -71.8 kJ - 1.57×10⁻² kJ

= -71.8 kJ

Therefore, the total internal energy change is -71.8 kJ.

To know more about first law of thermodynamics here

https://brainly.com/question/1604031

#SPJ1

an isomer of C3H7O undergoes one step oxidation reaction. Answer the following questions due to this reaction.
a) Write a full symbol equation for this reaction b) Name the proper reagent and catalyst for this reaction.

c) Why do you think there is no need to remove the product from the reaction vessel?

Answers

The specific equation depends on the isomer and the oxidizing agent used. An example of a general oxidation reaction could be:

C₃H₇OH + [O] → C₃H₆O + H₂O

Common oxidizing agents for organic compounds include potassium permanganate (KMnO₄), potassium dichromate (K₂Cr₂O₇), or hydrogen peroxide (H₂O₂).

Whether or not the product needs to be removed from the reaction vessel depends on the specific reaction and its desired outcome. In some cases, the product may be of interest for further reactions or analysis, and therefore, it would be retained in the reaction vessel.

Learn more about oxidation, here:

https://brainly.com/question/16976470

#SPJ1

Which of the following statements regarding the skeletal structure of the organic molecule shown
below is/are true?
K
2
3
H
H
I. A sp² hybrid orbital on C-1 overlaps with a sp hybrid orbital on C-2 to form the sigma
bond between
C-1 and C-2.
II. The bonds between C-2 and C-3 are formed from overlap of sp hybrid orbitals.
III. There are 10 sigma bonds in this molecule.
IV. The bond angle about C-2 is 109.5⁰.
V. The lone pair on the nitrogen atom is in a sp² orbital.

Answers

A sp² hybrid orbital on C-1 overlaps with a sp hybrid orbital on C-2 to form the sigma bond between C-1 and C-2. This statement regarding the skeletal structure of the organic molecule true. The correct option is option A.

In general, molecules containing carbon (C) are referred to as organic compounds. Carbon atoms serve as the primary structural framework for the enormous diversity of naturally occurring compounds. Organic substances play a critical role in the existence of all life forms on Earth (and perhaps elsewhere in the universe). A sp² hybrid orbital on C-1 overlaps with a sp hybrid orbital on C-2 to form the sigma bond between C-1 and C-2.

Therefore, the correct option is option A.

To know more about organic molecule, here:

https://brainly.com/question/10504103

#SPJ1

Next the students place waxed paper in front of the light instead of the plastic.

Material Waxed Paper
Photograph of Screen Very blurry white image on gray background.
Does the waxed paper affect how the light hits the screen? Explain your response.

Answers

Yes, the waxed paper does affect how the light hits the screen. Waxed paper is a translucent material that diffuses light as it passes through.

When light passes through the waxed paper, it scatters in various directions due to the irregularities and texture of the paper's surface. This scattering of light results in a blurry white image on a gray background when the photograph is taken.

Compared to plastic, which is typically more transparent and smooth, waxed paper has a rougher surface and contains wax coatings that further contribute to light scattering. This diffusion of light reduces the sharpness and clarity of the image projected onto the screen.

The scattered light rays create a more diffused and less defined image, leading to a blurry appearance in the photograph.Therefore, the use of waxed paper instead of plastic alters the behavior of light, causing the light to scatter and resulting in a blurry white image on a gray background when projected onto the screen.

For more such questions on light

https://brainly.com/question/10728818

#SPJ11

the relative formula masses (Mr) are: CaCo3 = 100; CaO =56 ; Co2=44

describe how this experiment could be used to provide evidence for the law of conservation of mass.

[6 marks]
include your answer:

-method

-which measurements should eb taken

-how the student could show evidence for the conservation for mass

Answers

The law of conservation of mass states that in a chemical reaction, the total mass of the reactants is equal to the total mass of the products. To provide evidence for this law, we can perform an experiment in which calcium carbonate ([tex]CaCO_3[/tex]) is decomposed to produce calcium oxide (CaO) and carbon dioxide ([tex]CO_2[/tex] ), and then measure the masses of the reactants and products.

Method:

Weigh a sample of [tex]CaCO_3[/tex] using a balance.

Heat the [tex]CaCO_3[/tex] in a crucible until it decomposes to CaO and [tex]CO_2[/tex]. The [tex]CO_2[/tex] gas will escape, leaving only CaO in the crucible.

Allow the crucible to cool and then weigh it again to determine the mass of the CaO produced.

Collect the [tex]CO_2[/tex] gas that is released during the reaction in a gas syringe or other collection device. Measure the volume of [tex]CO_2[/tex] gas produced, and calculate its mass using its molecular weight.

Which measurements should be taken:

The following measurements should be taken:

The mass of the [tex]CaCO_3[/tex] used as a reactant.

The mass of the CaO produced as a product.

The volume of [tex]CO_2[/tex] gas produced during the reaction.

The temperature and pressure of the [tex]CO_2[/tex] gas to allow for the calculation of its mass.

How the student could show evidence for the conservation of mass:

To show evidence for the law of conservation of mass, the student can compare the mass of the [tex]CaCO_3[/tex] used as a reactant to the total mass of the products, which includes the mass of CaO produced and the mass of [tex]CO_2[/tex] gas released.

The sum of the masses of CaO and [tex]CO_2[/tex] should be equal to the mass of the [tex]CaCO_3[/tex] used as a reactant, within experimental error. This will provide evidence that the mass of the reactants is conserved and equals the mass of the products, as required by the law of conservation of mass.

Additionally, the student could calculate the theoretical yield of CaO and CO2 based on the balanced equation for the reaction, and compare this to the actual yield obtained from the experiment. Any difference between the theoretical and actual yields could be due to experimental error, but the comparison can still provide additional evidence for the conservation of mass.

For more question on conservation of mass click on

https://brainly.com/question/27891057

#SPJ11

if 3 moes of cl reacts with 3 moles oxygen, then which substance is the limitting reactant and excess reactant​

Answers

If 3 moles of cl reacts with 3 moles oxygen, there is no limiting reactant or excess reactant because the reactants are in stoichiometric proportions.

To determine the limiting reactant and excess reactant, we need to compare the stoichiometry of the reaction to the given amounts of each reactant.

The balanced chemical equation for the reaction between chlorine (Cl2) and oxygen (O2) can be represented as follows:

2Cl2 + O2 → 2Cl2O

According to the balanced equation, it requires 2 moles of chlorine (Cl2) to react with 1 mole of oxygen (O2) to produce 2 moles of chlorine oxide (Cl2O).

Given that we have 3 moles of chlorine (Cl2) and 3 moles of oxygen (O2), we can determine the limiting reactant by comparing the ratio of moles between the two reactants.

The ratio of Cl2 to O2 required for complete reaction is 2:1. However, since we have equal amounts of Cl2 and O2 (both 3 moles), neither reactant is present in excess.

Therefore, in this scenario, there is no limiting reactant or excess reactant because the reactants are in stoichiometric proportions. All of the chlorine and oxygen will be consumed in the reaction, resulting in the complete conversion to chlorine oxide (Cl2O).

It's important to note that if the amounts of Cl2 and O2 were different, the reactant present in lesser quantity would be the limiting reactant, and the reactant in greater quantity would be the excess reactant.

for more questions on reactant
https://brainly.com/question/30129541

#SPJ11

To prepare zinc sulphate eye drops APF (Australian Pharmaceutical Formulary), the following ingredients are provided:
1) chlorobutol aqueous solution (0.67% w/v),
2) zinc sulphate monohydrate,
3) boric acid powder,
4) glycol aqueous solution (50% w/v)

Calculate the amount of each ingredients needed to prepare 70 mL of zinc sulphate eye drops APF. Show your working.

Answers

To prepare 70 mL of zinc sulfate eyedrops APF, you would need the following ingredients:

Zinc sulfate monohydrate: 0.07 g

Chlorobutol aqueous solution: 10.45 mL

Boric acid powder: 0.7 g

Glycol aqueous solution: 0.14 mL

To calculate the amount of each ingredient needed to prepare 70 mL of zinc sulfate eye drops APF, we'll follow these steps:

Step 1: Determine the concentration of zinc sulfate needed. Since the recipe doesn't specify the concentration, we'll assume a standard concentration of 0.1% w/v.

Step 2: Calculate the amount of zinc sulfate required. The desired concentration is 0.1% w/v, and we need to prepare 70 mL of the eye drops. Therefore, the amount of zinc sulfate needed can be calculated as follows:

Amount of zinc sulfate (g) = (Desired concentration (g/100 mL) * Volume (mL))/100

                       = (0.1 * 70)/100

                       = 0.07 g

Step 3: Determine the amounts of other ingredients based on the provided ratios. The chlorobutol solution is at a concentration of 0.67% w/v, so we need to calculate the volume required using the ratio:

Volume of chlorobutol solution (mL) = (Amount of zinc sulfate (g) * 100)/Concentration of chlorobutol (%)

                                  = (0.07 * 100)/0.67

                                  = 10.45 mL

The boric acid powder doesn't specify the concentration, so we'll assume it to be 1% w/v. Using the same logic, we can calculate the amount of boric acid powder required:

Amount of boric acid powder (g) = (Desired concentration (g/100 mL) * Volume (mL))/100

                             = (1 * 70)/100

                             = 0.7 g

Finally, the glycol solution is at a concentration of 50% w/v, so the volume required can be calculated as:

Volume of glycol solution (mL) = (Amount of zinc sulfate (g) * 100)/Concentration of glycol (%)

                            = (0.07 * 100)/50

                            = 0.14 mL

for such more questions on eyedrops

https://brainly.com/question/22086668

#SPJ8

Write the chemical formula for this molecule from the picture.

I understand there are 4 Hydrogens
2 Carbons, and 1 Sulfur, but I have no clue how to format it

Answers

Answer:

[tex]C_{2}H_{2}S[/tex]

What masses of potassium chloride and water are needed to make 300. g of 8.50% KCl solution?

Answers

We need 25.5 g of KCl and 274.5 g of water to make 300. g of 8.50% KCl solution.

To find the masses of potassium chloride (KCl) and water needed, we need to use the concentration of the solution and the total mass of the solution.

We need to find the mass of KCl in the solution. We know that the solution is 8.50% KCl by mass, so:

mass of KCl = 8.50% x 300. g = 25.5 g

We can find the mass of water in the solution by subtracting the mass of KCl from the total mass of the solution:

mass of water = 300. g - 25.5 g = 274.5 g

To create 300 g of 8.50% KCl solution, we need 25.5 g of KCl and 274.5 g of water.

To know more about the Solution, here

https://brainly.com/question/4131881

#SPJ1

LHow many grams of lead (II) sulfate will precipitate out of solution when 90.0 mL of a 0.10M lead (II)
nitrate solution reacts with an excess of sulfuric acid? Nitric acid is another product of this reaction.

___Pb(NO3)2+____H2SO4–>____PbSO4+____HNO3

Answers

Answer:  2.73 g PbSO4

Explanation:

1) solvefor moles Pb(no3)2

0.10 M X 0.09 L =0.009 moles Pb(NO3)2

2) stoichiometry from balanced chemical equation

___Pb(NO3)2 + ___H2SO4--->   PbSO4 +  ___2 HNO3

0.009 moles Pb(NO3)2 X (1 mole PbSO4 / 1 mole Pb(NO3)2) X (303.2516 g PBSO4/ 1mole PbSO4) = 2.73 g PbSO4

Other Questions
The New Kingdom began under the rule of Ahmose. What did he accomplish that allowed for the emergence of the New Kingdom? O He ended abuses by provincial governments O He initiated new irrigation projects. O He reunited Upper Egypt and Lower Egypt. 0 He drove aut foreign invaders. An adolescent with diabetes is learning to mix regular insulin and nph insulin in the same syringe. which action, if performed by the teen, would indicate the need for further instruction? Bos real estate ad states: ""custom homes for sale with scenic mountain views. easy financing and low down payments."" what else must be included in the ad in order for it to comply with tila? The first step in developing a comprehensive safety and health program including ppe is to. Consider the following data set.45 58 41 45 38 46 45 39 40 311.Sort the data and find quartiles of the data set.2.Find the interquartile range of the data set.3.Find the lower fence and the upper fence for outliers.4.Find outliers if they exist. State if the three side lengths 3 mi, 12 mi, 13 mi? Read the speech "Voluntourism: An Opportunity Too Good to be True" and consider the advertisement "The Opportunity of a Lifetime." Then, answer the question.Voluntourism: An Opportunity Too Good to be TrueA Speech to the Student Body of Evergreen High[1] Picture this: It's Spring Break, and you fly off to some country where there's lush rainforests and beautiful, blue coastlines to explore. There's also people in need, so you decide to blend your vacation with volunteering. Volunteering as a tourist, or voluntourism, seems like a great way to explore new regions and help people at the same time. However, this "volunteer plus travel" experience can actually harm local communities. While many teens might view traveling and volunteering abroad as a worthwhile adventure, there are more genuine and effective ways to make a difference.[2] Most would agree that volunteering in general is a worthy use of time. However, what if you found out the children you are "helping" are actually being kept in poor conditions so voluntourists will spend money to come to the local area? Dale Rolfe, a supporter of ethical voluntourism, explains the shocking reality that "Animal sanctuaries and orphanages are often manufactured for the voluntourist...encouraging a cycle of exploiting the very animals and children the volunteers are trying to help."[3] Proponents of the "volunteer plus travel" experience also argue that traveling to new places builds character and is a valuable way to learn about different cultures. With voluntourism, however, participants often pursue experiences that are all about them. For example, they sign up to build a school for a gold star on their resume, but they have no real building skills and take jobs away from local construction workers (Schulten). Or, they arrive to teach English but instead take selfies with the locals. One world traveler and ethical voluntourist believes voluntourism "can perpetuate small minded views of the world by taking insulated, fake, and structured experiences and selling them as unabridged and eye opening" (Carlos). The voluntour experience is a mirage. The voluntourist's eyes are not opened to real life at the destination, and lasting change is not achieved.[4] If you want a genuine experience where you can see a lasting impact, there are better options than voluntourism. You can volunteer in your local community. Give an hour every week to your town's animal rescue. Serve monthly dinners to the homeless. Be a reliable, positive influence on a child who needs a mentor. Studies show that volunteering and forming lasting relationships with those you help has a positive impact on your physical and emotional health. In fact, blood pressure is reduced, memory is improved, and rates of depression are reduced (Michaels).[5] There is another reason to look into alternatives to voluntourism. Did you know the average "voluntour" travel package costs $3,400 (Rolfe)? Could that travel money be better spent? If the world's citizens are your passion, it could go to an international organization. If you care about education, your funds can be used to buy books for students in faraway lands. If you want villagers to have clean water, contribute funds to local efforts to dig wells. If you want to experience a different culture, travel to the country as a guest, and learn from the locals how you can best help them after you've returned home. But do not voluntour.[6] In reality, there are better ways to make a difference. Voluntourism might appear to be an adventure that blends travel and helping others, but it does little except provide a costly, superficial experience that might actually do more harm than good. So, volunteer where you are most needed-at home, where you can stay to see the job through and form genuine, lasting relationships. Choose a beautiful coastline closer to home and send the travel money you saved to an international organization that will put it to good use. Whatever you do, don't turn someone else's hardship into your vacation."The Opportunity of a Lifetime"(look at image)Both texts (the speech and the advertisement) address voluntourism. However, each text has a different purpose, which is reflected by the details each writer chose to include. Consider the words and images used.In a paragraph of 6-8 sentences, identify what each text emphasizes and explain how that emphasis reveals each author's position on voluntourism. Be sure to state each author's position and include evidence from both texts to support your analysis. Q-mart failed to include inventory that was kept in a separate warehouse in its end-of-the-period inventory count. Explain how this error will affect this year's balance sheet. (Check all that apply.) write each as the sum of two terms in the form t_n,r. t_5,3 , t_11,2 , t_15,13 Fair coin say you flip a coin 10 times. It comes up tails 8 times and heads twice. Is this a fair coin? Online content that has been created and posted by unpaid contributors such as customers or fans of a product or service is referred to as:. David has kept track of his familys grocery bills for the past 10 weeks, as shown in the table.Week 1 2 3 4 5 6 7 8 9 10Bill ($) 92 106 129 115 100 84 110 156 98 87Would you choose to use a histogram, a circle graph, or a line graph to display the data? Explain your choice. Then make a display. a group of mapuve CLC MLMS4 STUDENTS were questioned how they got to school.half of the students said they walk, one-third said they take a taxi,and the rest claimed they drive.calculate the number of students delivered by a car using proper fractions What is the most accurate information her coach can offer to help encourage evie to add an anerobic workout to her fitness plan? A schedule for completing the redesign of an organizations gardens and landscape:________ Per the emergency response module, biohazard spills are first covered with paper towels, or other absorbent primarily to:____. Piston 1 in the figure has a diameter of 1.87 cm.Piston 2 has a diameter of 9.46 cm. In the absence of friction, determine the force F, necessary to support an object with a mass of 991 kg placed on piston 2. (Neglect the height difference between the bottom of the two pistons, and assume that the pistons are massless). A(n) Blank______ database management system allows users to create, read, update, and delete data in a relational database. Multiple choice question. relational primary key real Triangle ABC is congruent to triangle FDE, and both triangles have the same orientation, as shown. What is the slope of DF, which is also the slope of AC Which equation agrees with the ideal gas law?StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.V subscript 1 n subscript 1 equals V subscript 2 n subscript 2.P subscript 1 n subscript 1 equals P subscript 2 n subscript 2.StartFraction P subscript 1 over P subscript 2 EndFraction equals StartFraction T subscript 2 over T subscript 1.