The term _____ is applied to water that exceeds the average 35 parts per thousand salinity, and the term _______ applies to water that is less than 35 parts per thousand salts.

Answers

Answer 1

Answer: The term "brine" is applied to water that exceeds the average 35 parts per thousand salinity, and the term "brackish" applies to water that is less than 35 parts per thousand salts.

Brine is a term used to describe water that has a high concentration of salt, typically above 50 parts per thousand. It is commonly found in places such as salt flats, where water evaporates and leaves behind concentrated salt deposits. Brackish water, on the other hand, is water that has a lower salt concentration than seawater but is not completely fresh. Brackish water is often found in estuaries, where rivers meet the sea and the mixing of freshwater and saltwater creates a unique environment with a salinity between 0.5 and 35 parts per thousand.

Answer 2

The term hypersaline is used to describe water that has a salinity level higher than the average of 35 parts per thousand (ppt).

Hypersaline water can be found in certain environments such as salt flats, salt pans, and some inland seas.

These areas can accumulate high concentrations of salt due to evaporation of water over time, leaving behind salt crystals and other minerals.

Conversely, the term "hyposaline" is used to describe water that has a salinity level lower than the average of 35 ppt.

This can occur in areas where freshwater flows into the ocean, such as river deltas, and can also be found in certain lakes and ponds.

The lower salinity levels can have an impact on the types of organisms that can survive in the water, as some are better adapted to high salinity while others require lower salinity levels.

To know more about hypersaline refer here

https://brainly.com/question/22034479#

#SPJ11


Related Questions

the coast refers to all parts of the land/sea boundary, whereas the shore refers to the direct location where the land and water interface. (True or False)

Answers

Answer: True.

The coast refers to the broader region where land and sea meet, including beaches, cliffs, dunes, and other landforms shaped by coastal processes. The shore, on the other hand, refers specifically to the immediate interface between land and sea, such as the area where waves break on the beach. In general, the shore refers to the more dynamic, narrow zone where waves, tides, and other processes interact to shape the landforms and habitats found at the coast.

As stated earlier, the coast refers to a broader region that includes both the land and sea, while the shore refers to the immediate area where the land and sea meet. The terms coast and shore are often used interchangeably, but they actually describe different physical features and processes.

The coast is a complex and dynamic interface between land and sea that includes many different landforms, such as cliffs, beaches, dunes, estuaries, salt marshes, and tidal flats. These landforms are shaped by the interaction between the ocean and the land, which is influenced by factors such as waves, tides, currents, and coastal storms. The coast is also home to a wide range of plant and animal species that have adapted to the unique conditions found in this region.

In contrast, the shore refers specifically to the area where waves break on the beach. This area is the most dynamic part of the coast and is constantly changing in response to changing ocean conditions. The shore includes features such as sandbars, tidal pools, and wave-cut platforms, which are all shaped by the forces of waves and tides.

Overall, while the terms coast and shore are related, they describe different physical features and processes. Understanding these differences is important for scientists, planners, and policymakers who are working to manage and protect these dynamic and important regions.

The statement is true because "coast" refers to the broader geographic area where the land and sea meet, including both the land and adjacent sea.

It encompasses a wider area and may refer to the geological, ecological, and social characteristics of the region. On the other hand, "shore" refers to the direct interface between the land and the water, such as a beach or rocky coastline.

The term "shoreline" is often used to refer to the specific boundary between the land and water. So, while the two terms are related, they have slightly different meanings and refer to different aspects of the land/sea interface.

Learn more about geographic area https://brainly.com/question/7424391

#SPJ11

continental, hot summer climates support year-round agriculture growth. chinese rice agriculture is entirely dependent on this climate type in the north china plain.True/False

Answers

The given statement, "continental, hot summer climates support year-round agriculture growth. chinese rice agriculture is entirely dependent on this climate type in the north china plain" is True.

The continental climate is characterized by hot summers and cold winters with limited precipitation. This climate type is ideal for year-round agriculture growth because of the availability of sunshine and warmth. The North China Plain is an important agricultural region in China that relies heavily on the continental climate to support rice agriculture.

Rice is a staple food in China, and the North China Plain produces a significant portion of the country's rice crop. The region's climate provides favorable conditions for rice growth, with warm temperatures and sufficient rainfall during the growing season.

However, this climate type can also bring challenges, such as droughts or floods, that can impact agricultural production. Despite these challenges, the continental climate remains a crucial factor in supporting year-round agriculture growth, especially in regions like the North China Plain where agriculture is a major part of the economy.

For more such questions on, climates :

https://brainly.com/question/30502696

#SPJ11

if one travels away from the center of a mid-ocean rift (ridge) zone, the rock on either side of the rift zone gets progressivelyA. YoungerB. It stays the same ageC. OlderD. Depends on the nature of the rift zoneE. None of the above

Answers

As one travels away from the center of a mid-ocean rift zone, the rock on either side of the rift zone gets progressively younger.

The correct option is (a).

This is due to the process of seafloor spreading, which occurs at mid-ocean ridges. As magma rises to the surface and cools, it solidifies to form a new oceanic crust. The new crust then moves away from the ridge axis in opposite directions, creating a symmetrical pattern of magnetic stripes on either side of the ridge. By studying the magnetic properties of these stripes, scientists can determine the age of the oceanic crust and the rate of seafloor spreading. Therefore, the rocks on either side of the mid-ocean rift zone are progressively younger, with the youngest rocks being closest to the ridge axis.

Know more about the mid-ocean rift zone:

https://brainly.com/question/11614001

#SPJ11

If one travels away from the center of a mid-ocean rift (ridge) zone, the rock on either side of the rift zone gets progressively Older. The correct answer is C. Older.


A mid-ocean ridge is a long underwater mountain range that forms due to the process of seafloor spreading. As tectonic plates pull apart at a mid-ocean ridge, molten material (magma) from the Earth's mantle rises up to fill the gap, forming the new oceanic crust. This process occurs at the center of the ridge.

As you move away from the center of the mid-ocean ridge, the rocks become progressively older. This is because the newly formed crust continuously moves away from the ridge axis as new material is added, pushing the older crust further away. The age of the rocks increases with distance from the ridge.

In summary, when you travel away from the center of a mid-ocean rift (ridge) zone, the rock on either side of the rift zone gets progressively older. This is due to the process of seafloor spreading, in which a new crust forms at the ridge axis and pushes the older crust away.

Learn more about rift here:

https://brainly.com/question/13604820

#SPJ11

Place the events of the Solar System's formation in chronological order from protostellar cloud to present day. Protostellar cloud collapses under self-gravity solar nebula rotates rapidly and flattens outward into a disk tiny dust and ice grains condense out of the nebula planetesimals and protoplanets form formation of planets late stage bombardment grain-sized particles stick together Present day

Answers

The chronological order of the events of the Solar System's formation: 1. Protostellar cloud collapses under self-gravity 2. Solar nebula rotates rapidly and flattens outward into a disk 3. Tiny dust and ice grains condense out of the nebula 4. Planetesimals and protoplanets form 5. Formation of planets 6. Late stage bombardment 7. Grain-sized particles stick together 8. Present day


1. Protostellar cloud: A large cloud of gas and dust in space begins to collapse under its own gravity.
2. Solar nebula rotates rapidly and flattens outward into a disk: As the protostellar cloud collapses, it starts to rotate faster and flattens into a spinning disk, called the solar nebula.
3. Grain-sized particles stick together: Tiny dust and ice grains within the solar nebula begin to collide and stick together, gradually growing larger.
4. Planetesimals and protoplanets form: As the particles continue to accumulate, they form larger bodies called planetesimals, which eventually grow into protoplanets through more collisions and accretion.
5. Formation of planets: The protoplanets continue to evolve, eventually forming the planets in our Solar System.
6. Late stage bombardment: After the planets have formed, they undergo a period of heavy bombardment by asteroids, comets, and other debris left over from the formation process.
7. Present day: Our Solar System as we know it today, with planets, moons, and other celestial bodies orbiting the Sun.


Learn more about nebula here: brainly.com/question/9497068

#SPJ11

a force of magnitude 112lb and one of 84lb are applied to an object at the same point, and the resultant force has magnitude 162 lb.

Answers

The angle between the 112 lb force and the 162 lb resultant force is approximately 95.2 degrees to the nearest tenth of a degree.

To find the angle between the forces of 112 lb and the resultant force of 162 lb, we will use the Law of Cosines. The Law of Cosines states that, for any triangle with sides of lengths a, b, and c, and an angle C between sides a and b:

c² = a² + b² - 2ab * cos(C)

In this problem, we have a triangle with sides a = 112 lb, b = 84 lb, and c = 162 lb. We want to find angle C, which is the angle between the 112 lb and 162 lb forces.

First, plug in the values into the Law of Cosines formula:

162² = 112² + 84² - 2(112)(84) * cos(C)

Now, we will solve for cos(C):

cos(C) = (162² - 112² - 84²) / (2 * 112 * 84)

Calculate the values:

cos(C) ≈ -0.0908

To find angle C, take the inverse cosine (arccos) of the value:

C = arccos(-0.0908)

C ≈ 95.2 degrees

So, the angle between the 112 lb force and the 162 lb resultant force is approximately 95.2 degrees to the nearest tenth of a degree.

The complete question is:

A force of magnitude 112 lb and one of 84 lb are applied to an object at the same point and the resultant force has a magnitude of 162 lb. Find to the nearest tenth of a degree the angle made by the resultant force with the force of 112 lb.

For more about angle:

https://brainly.com/question/7116550

#SPJ11

The distribution of alkaline and acidic soils in the United States is essentially divided by the___-inch annual precipitation isohyet. а) 60. b) 50. с) 20. d) 30. е) 40.

Answers

The distribution of alkaline and acidic soils in the United States is essentially divided by the d) 30-inch annual precipitation isohyet.

This means that regions that receive less than 30 inches of annual precipitation tend to have alkaline soils, while regions that receive more than 30 inches of annual precipitation tend to have acidic soils.

This distribution is due to several factors. For example, in regions with low precipitation, the soil tends to be alkaline because there is less water to dissolve and transport minerals, such as calcium and magnesium, which increase soil alkalinity. Conversely, in regions with high precipitation, the soil tends to be acidic because rainfall dissolves minerals such as aluminum and iron, which increase soil acidity.

Understanding the distribution of alkaline and acidic soils is important for agriculture, as different crops require different soil pH levels for optimal growth. For example, crops such as blueberries and potatoes prefer acidic soils, while crops such as wheat and barley prefer alkaline soils. By understanding the distribution of soil types, farmers can choose crops that are better suited to their region's soil pH levels, leading to more productive and sustainable agriculture.

Therefore, the correct answer is d) 30.

Learn more about alkaline soils here: https://brainly.com/question/29527039

#SPJ11

Recommendation and solutions for tropical cyclone funso

Answers

Tropical Cyclone Funso is a powerful weather phenomenon that occurred in the past, and my knowledge is based on information available until September 2021. It is always important to follow official instructions and consult with local experts during such events. Here are some general recommendations:

1. Stay informed: Monitor local weather reports, news updates, and official bulletins from meteorological agencies to stay informed about the cyclone's progress and potential threats.
2. Evacuation planning: If you live in an area prone to tropical cyclones, familiarize yourself with evacuation routes and shelters beforehand. Create a family emergency plan and ensure everyone knows what to do and where to go in case of an evacuation order.
3. Secure your property: Prior to the cyclone's arrival, secure or store loose items, such as outdoor furniture, gardening tools, and toys. Trim trees and shrubs, and clear gutters and drains to prevent blockages.
4. Stock up on essentials: Create an emergency kit that includes non-perishable food, drinking water, medications, flashlights, batteries, a first aid kit, important documents, and other essential supplies. Make sure you have enough to sustain your family for at least three days.
5. Reinforce your home: Strengthen windows and doors, and consider installing storm shutters or plywood covers to protect against high winds. Ensure your roof is well-maintained and secured.
6. Power supply: Prepare alternative power sources such as generators and have sufficient fuel. If you have medical equipment that relies on electricity, ensure you have backup power options and inform your healthcare provider about your situation.
7. Stay indoors: During the cyclone, stay indoors and away from windows. Listen to battery-powered radios or smartphones for updates and instructions from local authorities.
8. Post-cyclone safety: After the cyclone has passed, exercise caution when venturing outside. Be aware of potential hazards like downed power lines, weakened structures, and flooded areas. Follow instructions regarding safe water usage and be mindful of the risk of waterborne diseases.
9. Seek assistance: If you or someone else requires immediate medical attention or rescue, contact emergency services right away. Do not hesitate to seek help or assistance from local authorities or humanitarian organizations in your area.
Remember, these recommendations are general in nature, and it is crucial to adapt them to your specific situation and follow the advice and instructions given by local authorities who have the most up-to-date information and expertise on the cyclone's impact.

Learn more about tropical Cyclone here:

https://brainly.com/question/27072472

#SPJ11

HELP. ASAP!

How has the increased burning of fossil fuels lead to pollution in East Asia? Describe examples of cleaner sources of power some countries are using

Answers

It has led to release of dangerous gases into the atmosphere leading to greenhouse effect and global warming

Cleaner sources of power : solar energy, wind energy

to be an american is not to have secured equality and justice, but only – with the help of a story of unprecedented aspiration – still to hope and struggle for them."

Answers

The author who wrote this statement  “To be an American is not to have secured equality and justice, but only – with the help of a story of unprecedented aspiration – still to hope and struggle for them.”  is J. Hector St. John de Crèvecoeur.

What is  equality and justice?

The quote implies that being a citizen of the United States does not automatically ensure fairness and impartiality. To put it differently, being an American grants the chance to pursue these ideals and persistently work towards achieving them.

The statement  suggests that the American sense of self is connected to a story of pursuing advancement and fairness, even though these objectives have yet to be completely realized.

Learn more about   equality and justice from

https://brainly.com/question/15835405

#SPJ1

See full text

Which  authors  writes the following? “To be an American is not to have secured equality and justice, but only – with the help of a story of unprecedented aspiration – still to hope and struggle for them.”

large-scale manipulation of the environment as a way of reversing the negative effects of climate change are part of a _______ strategy quizlet

Answers

Large-scale manipulation of the environment as a way of reversing the negative effects of climate change is known as geoengineering. The correct option is C.

It involves various techniques such as carbon capture and storage, solar radiation management, ocean fertilization, and afforestation. These techniques aim to alter the Earth's natural systems to counteract the impacts of climate change. Geoengineering is a controversial approach as it involves significant environmental risks and uncertainties, and some scientists consider it to be a last resort option.

In terms of the overall strategy for addressing climate change, geoengineering falls under the category of mitigation, which involves reducing greenhouse gas emissions and removing carbon dioxide from the atmosphere. Other strategies include adaptation, which involves adjusting to the impacts of climate change, and acceleration, which involves rapidly transitioning to low-carbon technologies and sustainable practices.

Buffering is not typically used in the context of climate change strategy, but it could refer to measures to protect vulnerable populations or ecosystems from the impacts of climate change.

Overall, there is no single approach that can solve the complex problem of climate change. Instead, a combination of strategies, including mitigation, adaptation, and potentially geoengineering, will be needed to address this global challenge.  The correct option is C.

To know more about geoengineering, refer here:

https://brainly.com/question/30216931#

#SPJ11

Complete question:

Large-scale manipulation of the environment as a way of reversing the negative effects of climate change are part of a strategy:

a. Buffering

b. Adaptation

c. Geoengineering

d. Mitigation

e. Acceleration

the san andreas fault in west coast of california is an examples of: group of answer choices convergent boundary divergent boundary no plate boundary

Answers

The San Andreas Fault is an example of a plate boundary, specifically a transform boundary.

It is where two tectonic plates, the Pacific Plate and the North American Plate, slide past each other in opposite directions. The movement along the fault creates earthquakes, which are a common occurrence in California. The San Andreas Fault extends roughly 800 miles through California and is one of the most studied and well-known fault systems in the world.

The fault separates the Pacific Plate from the North American Plate and is part of the larger boundary known as the Pacific Ring of Fire, which is characterized by frequent earthquakes and volcanic eruptions. Due to its location and potential for seismic activity, the San Andreas Fault is closely monitored by geologists and seismologists to better understand and prepare for earthquakes in the region.

To know more about tectonic plates refer to

https://brainly.com/question/838446

#SPJ11

A moraine that is found along the sides of a glacial valley and is aligned parallel to the direction of flow:
recessional
end
lateral
medial

Answers

The correct choice is lateral moraine.

The moraine that is found along the sides of a glacial valley and is aligned parallel to the direction of flow is known as a lateral moraine. These moraines are formed as the glaciers move down the valley, scraping and plucking the rock and debris from the valley walls.

This material is then deposited along the sides of the glacier as lateral moraines. Lateral moraines can be found on both sides of the glacier and can extend for long distances. They are typically composed of a mixture of rocks, boulders, and other debris that have been eroded and transported by the glacier.

It is important to note that lateral moraines are distinct from medial and end moraines. Medial moraines are formed when two glaciers merge, and the material that was once along the edges of the individual glaciers is now carried down the center of the new glacier. End moraines, on the other hand, are formed at the terminus of the glacier and mark the furthest extent of the glacier's advance.

In summary, lateral moraines are a common feature of glacial valleys and are formed as glaciers erode and transport material from the valley walls. They are aligned parallel to the direction of flow and are distinct from medial and end moraines.

To know more about Lateral Moraine visit:

https://brainly.com/question/29665588

#SPJ11

Describe the scenery if you were to travel from point A to E in a straight line. Take note of the physical aspects of the route

Answers

Traveling in a straight line from point A to E would depend on the specific locations and geographical features along the route. The actual scenery will vary greatly depending on the specific locations and geographical characteristics of the route you take.

As you start from point A and progress towards point E, the scenery could change as you traverse different regions and landscapes. Here is a possible description:

At the beginning of your journey, you might find yourself in a densely populated urban area, passing through bustling streets lined with buildings, shops, and various city landmarks. The environment would be characterized by the sights and sounds of a vibrant city, with a mix of architectural styles and people going about their daily lives.

As you move farther away from the city, the landscape could transition into suburban areas, with a blend of residential neighborhoods, parks, and commercial districts. This phase might offer a more relaxed atmosphere, with tree-lined streets, houses, gardens, and occasional local BUSINESSes.

Continuing on your journey, you may encounter open countryside or rural areas. Here, the scenery would consist of vast expanses of farmland, rolling hills, meadows, and perhaps some small villages or farmsteads. Depending on the region, you might witness agricultural activities, such as crop cultivation, grazing livestock, or orchards.

Further along the route, the landscape might change to more natural environments. You could encounter forests, woodlands, or even mountainous terrain, depending on the geographical features of the area. The scenery would be dominated by lush greenery, tall trees, wildlife, and the sounds of nature. You might come across rivers, streams, or lakes, adding a touch of serenity to the surroundings.

As you approach point E, the specific features of the area will determine the final scenery. It could be coastal, with sandy beaches, cliffs, and the rhythmic crashing of waves. Alternatively, it might be a desert region, characterized by arid landscapes, sand dunes, and a vast expanse of open space.

Remember, this description is a general depiction of what you might encounter while traveling in a straight line from point A to E.

Learn more about mountainous here:

https://brainly.com/question/10690247

#SPJ11

Which statements accurately describe recent population density and shifts in Southeast Asia?

Answers

Southeast Asia is a region of the world that has undergone drastic changes over the years. According to data from the United Nations, the population density in Southeast Asia was 103 people per square kilometer in 1990, which increased to 130 people per square kilometer in 2019.

With the increasing number of inhabitants and globalization, the area has become a hub for different cultures and economic activities. Over time, there have been notable changes in the population density and shifts in Southeast Asia. Here are some accurate statements that describe these changes:

Increasing Population Density Southeast Asia has experienced an increase in population density in the last few decades. According to data from the United Nations, the population density in Southeast Asia was 103 people per square kilometer in 1990, which increased to 130 people per square kilometer in 2019.

The rise in population density can be attributed to factors like better healthcare facilities, higher life expectancy, and increased job opportunities in the region.

Urbanization: The rise in population density in Southeast Asia can be partly attributed to the growth of urban centers in the region. In recent years, there has been a significant increase in urbanization across Southeast Asia. This has been driven by factors like better job opportunities, better living standards, and improved infrastructure.

The migration of people from rural areas to urban centers has also contributed to the increase in population density. Youthful Demographics: Another notable trend in Southeast Asia is the youthful demographics. The region has a large population of young people who are under the age of 30.

This is attributed to factors like better healthcare facilities and a decline in infant mortality rates. It is expected that this trend will continue in the coming years as more people continue to live longer and healthier lives.

In conclusion, Southeast Asia has experienced significant changes in population density and shifts in recent years. The region has become more densely populated, with urban centers experiencing a significant increase in population. Additionally, the region has a youthful demographic, which is expected to continue in the future.

To know more about population density

https://brainly.com/question/13902749

#SPJ11

John is assisting a geologist who has traveled across the world and collected a few samples. He asks John to classify the samples that can be dated using Carbon-14 and Uranium-235 (or U-235). All organic materials contain carbon and are dated using C-14; inorganic materials are dated using any radioactive element, such as uranium, rubidium, potassium, and thorium, except carbon. Now help John group the samples. Granite, wood piece, Egyptian mummies, Sand stone, gneisses

Answers

The samples can be grouped as follows: Organic materials that can be dated using Carbon-14 (C-14): Wood piece and Egyptian mummies. Inorganic materials that can be dated using radioactive elements other than carbon: Granite, sandstone, and gneisses.

Carbon-14 dating is used to determine the age of organic materials, such as wood, bones, and textiles. Since all organic materials contain carbon, they can be dated using the decay of the radioactive isotope Carbon-14.

On the other hand, inorganic materials like rocks and minerals cannot be dated using Carbon-14. Instead, they can be dated using other radioactive elements, such as uranium-235 (U-235), rubidium, potassium, and thorium. These elements undergo radioactive decay and can be used to estimate the age of inorganic materials.

Based on this information, the samples can be grouped as follows: The wood piece and Egyptian mummies are organic materials that can be dated using Carbon-14. The granite, sandstone, and gneisses are inorganic materials that can be dated using radioactive elements other than carbon. By classifying the samples based on their composition and the appropriate dating methods, the geologist can effectively analyze and determine the ages of the collected materials.

Learn more about sandstone here:

https://brainly.com/question/1563342

#SPJ11

Which of the following statements best describes the European Union (EU)? A. The EU is an organization whose goal is to unite Europe into a single political state. B. The EU is a political and economic partnership among separate European nations. C. The EU is a military partnership among separate European nations. D. The EU is a term used to describe the common ancestry of many European nations. Please select the best answer from the choices provided. A B C D.

Answers

The best  is is B. The EU is a political and economic partnership among separate European nations.

The European Union (EU) is a political and economic partnership among 27 European nations. It was established with the aim of promoting peace, stability, and economic prosperity among its member countries. The EU functions as a supranational organization, meaning that it has decision-making powers that extend beyond the authority of individual member states.

The EU operates on the principles of cooperation and integration. It has created a single market, known as the European Single Market, which allows for the free movement of goods, services, capital, and people within the member countries. This has facilitated trade and economic growth among the participating nations.

In addition to its economic dimension, the EU also plays a role in various policy areas such as agriculture, fisheries, environmental protection, justice , and security. It promotes common policies and standards to ensure harmonization and cooperation among member states.

The EU has its own institutions, including the European Commission, the European Council, the European Parliament, and the Court of Justice of the European Union. These institutions work together to develop and implement EU policies, laws, and regulations.

While the EU has deepened integration among its member states, it does not aim to create a single political state. Each member country retains its sovereignty and has a say in the decision-making processes of the EU.

Overall, the EU is a unique political and economic partnership that seeks to promote cooperation, integration, and shared values among European nations while respecting their individual identities and sovereignty.

Learn more about justice here:

https://brainly.com/question/14830074

#SPJ11

Answer:B

Explanation:edge

Blue or white main sequence stars only occur in the evolutionary stages of development for O high-mass stars low-mass stars suporovas Intermediate-mass stars

Answers

Blue or white main sequence stars only occur in the evolutionary stages of development for high-mass stars.

Main sequence stars are those that are fusing hydrogen in their cores, which is the most common phase of stellar evolution. Blue or white main sequence stars are those that have a higher surface temperature, which is a result of their higher mass and higher rate of fusion.

The main sequence phase is the longest phase in a star's life, and during this phase, the star is in a state of equilibrium, with the inward pull of gravity balanced by the outward pressure of the energy produced by nuclear fusion. The mass of the star determines the temperature, luminosity, and size of the star, as well as its ultimate fate.

High-mass stars, which have a mass greater than about 8 times that of the Sun, are the only stars that are hot and massive enough to have a blue or white main sequence phase.

These stars burn through their fuel quickly, and they have short lifetimes compared to lower-mass stars. When a high-mass star exhausts its fuel, it will undergo a supernova explosion, leaving behind a neutron star or a black hole.

For more such questions on high-mass stars visit:

https://brainly.com/question/14969026

#SPJ11

Fe(NO3)3 (aq) + Rb3PO3(aq) à FePO3(s) + RbNO3(aq)



How many moles of iron(III) phosphite will precipitate when 0. 473 moles of rubidium phosphite react with excess of iron(III) nitrate?


Help pls and thank u

Answers

In the given chemical reaction, 0.473 moles of rubidium phosphite will react with an excess of iron(III) nitrate to form iron(III) phosphite. The question asks for the number of moles of iron(III) phosphite that will precipitate.

To determine the moles of iron(III) phosphite, we need to examine the stoichiometry of the reaction. From the balanced equation, we can see that the ratio of rubidium phosphite to iron(III) phosphite is 3:1. Therefore, for every 3 moles of rubidium phosphite that react, 1 mole of iron(III) phosphite will precipitate. Since the given quantity is 0.473 moles of rubidium phosphite, we can calculate the moles of iron(III) phosphite as follows: 0.473 moles Rb3PO3 * (1 mole FePO3 / 3 moles Rb3PO3) = 0.1577 moles FePO3 Therefore, when 0.473 moles of rubidium phosphite react with an excess of iron(III) nitrate, 0.1577 moles of iron(III) phosphite will precipitate.

Learn more about chemical reactions here:

https://brainly.com/question/29762834

#SPJ11

 mapping the history of natural hazards in a region combined with an understanding of related geological forces can help forecast the locations and likelihoods of future events in this article NASA oceanographic Bill patzert says that this forecast “ shows that the natural hazards don’t necessarily have to be catastrophic like [ hurricanes ] Katrina or sandy they can creep up on you today. What is a nuisance today,in a couple decades will be a serious problem for some communities.” What is your opinion about this statement? How does it relate to how humans have attempted to map the history of natural hazards around the world?

Answers

A naturally occurring event that poses a threat to a population a map showing the history of natural hazards in a region combined with knowledge of associated geological factors the likelihoods of future events in this article nautical data from NASA.

A natural disaster is a dangerous occurrence that results in unacceptably high numbers of fatalities and/or massive property damage.

Through a number of grants and collaborations supported by the NASA Research Opportunities in Space and Earth Science (ROSES) programme, the NASA Disasters programme sponsors application science to support disaster risk reduction, response, and recovery.

Geological, hydrological, meteorological, and biological hazards are a few basic categories into which natural hazards can be divided.

Read more about natural hazards at

https://brainly.com/question/31128978

#SPJ1

During the Cenozoic, plate interactions gave rise to many events of mountain building, volcanism, and earthquakes in ________ North America.
A) western
B) central
C) eastern
D) southern
E) northern

Answers

During the Cenozoic era, plate interactions gave rise to numerous events of mountain building, volcanism, and earthquakes in western North America.

This occurred as a result of the convergence of the Pacific Plate and the North American Plate. The subduction of the oceanic plate beneath the continental plate led to the formation of mountain ranges, such as the Rocky Mountains and the Sierra Nevada.

These geological processes also generated significant volcanic activity, resulting in the formation of volcanic arcs, such as the Cascade Range. Earthquakes have also been a common occurrence in this region due to the ongoing plate tectonics.

In summary, the Cenozoic era saw significant mountain building, volcanic activity, and earthquakes in western North America as a result of the interactions between the Pacific Plate and the North American Plate. This dynamic process shaped the landscape and contributed to the region's rich geological history.

To know more about volcanism visit

https://brainly.com/question/21203461

#SPJ11

The forecasts are issued on Monday, March 21, at 1200z, which...The forecasts are issued on Monday, March 21, at 1200z, which corresponds to what local, Central Daylight Time (CDT)?Complete Table 11-1 by filling in the blanks indicating local time.Why is it appropriate in this example to report the predicted daily minimum and maximum temperatures (the row labeled N/X) at 1200z and 0000z respectively?Output variables are closely related to one another. Why do you think that the NAM model predicts higher temperatures than the GFS model in the first nine hours after the forecast is issued?Each row in the tables indicates a different variable. Can you decode their abbreviations?DT ________________HR(z) ________________N/X ________________TMP ________________DPT ________________CLD ________________WDR ________________WSP ________________

Answers

The forecasts issued on Monday, March 21 at 1200z correspond to Central Daylight Time (CDT) at 7:00 am.
It is appropriate to report the predicted daily minimum and maximum temperatures (row labeled N/X) at 1200z and 0000z respectively because these are the standard times for daily temperature recordings.

The NAM model may predict higher temperatures than the GFS model in the first nine hours after the forecast is issued because the NAM model has a higher resolution and can pick up on smaller-scale temperature variations that the GFS model may miss.
The abbreviations in Table 11-1 are:
- DT: Date/Time
- HR(z): Hours (in zulu time)
- N/X: Daily minimum and maximum temperatures
- TMP: Temperature
- DPT: Dew Point Temperature
- CLD: Cloud Cover
- WDR: Wind Direction
- WSP: Wind Speed
1. Local Central Daylight Time (CDT) for Monday, March 21, at 1200z:
1200z corresponds to 7:00 AM CDT since CDT is 5 hours behind Coordinated Universal Time (UTC).
2. It's appropriate to report the predicted daily minimum and maximum temperatures at 1200z and 0000z respectively because these times represent the start and midpoint of the day, giving a good estimate of the range of temperatures throughout the day.
3. The NAM model predicts higher temperatures than the GFS model in the first nine hours after the forecast is issued due to differences in the models' input data, resolution, and physical parameterizations. Different models might produce different outputs depending on their configuration and assumptions.
4. Here are the abbreviations decoded for each variable in the table:
- DT: Date
- HR(z): Hour in Coordinated Universal Time (UTC)
- N/X: Minimum (N) and Maximum (X) temperature predictions for the day
- TMP: Temperature
- DPT: Dewpoint temperature
- CLD: Cloud cover
- WDR: Wind direction
- WSP: Wind speed

Learn more about Central Daylight Time here: brainly.com/question/30773385

#SPJ11

Based on what you have learned so far in this unit of study, what is the most likely explanation for the sudden rise of co2 levels in the present day? question 7 options: burning of fossil fuels shifts in earth's axis shifts in earth's distance from the sun 11-year cycles of sunspots

Answers

Based on the information available up until my last update in September 2021, the most likely explanation for the sudden rise of CO2 levels in the present day is the burning of fossil fuels.

Human activities, such as the combustion of fossil fuels like coal, oil, and natural gas, release significant amounts of carbon dioxide into the atmosphere. These emissions have been steadily increasing since the Industrial Revolution and have contributed to the accumulation of CO2 in the Earth's atmosphere.

While shifts in Earth's axis and distance from the sun can have long-term effects on climate change, they are not considered primary factors in the sudden rise of CO2 levels. Similarly, 11-year cycles of sunspots, which are solar phenomena, may have some influence on climate variations but are not directly responsible for the significant increase in CO2 levels observed in recent decades.

Learn more about combustion here:

https://brainly.com/question/13153771

#SPJ11

Como es la población en la región Occidental de Cuba

Answers

On the population of a specific region in Cuba called "Occidental." Cuba is an island nation in the Caribbean, and it is divided into several regions, including the provinces of Havana, Matanzas, Cienfuegos, Sancti Spíritus, Villa Clara, Ciego de Avila, Camagüey, Las Tunas, Holguín, Santiago de Cuba, and Guantánamo.

It is possible that the Occidental region is located in one of these provinces, but without more specific information, it is difficult to provide an accurate answer. If you have more information on the location or boundaries of the Occidental region, I may be able to provide more specific information.  

Learn more about population

https://brainly.com/question/27991860

#SPJ4

Full Question ;

How is the population in the region Occidental of Cuba?

Why are dust clouds more observationally inconvenient than gas clouds?A. There is an envelope of dust around every starB. We understand the effect of dust on light, but have no idea how gas influences observationsC. Dust can cause absorption lines at certain wavelengths while gas affects all wavelengths equallyD. Dust is abundant while gas is rare in our galaxyE. Dust can block light in more ways

Answers

The dust clouds are more observationally inconvenient than gas clouds is Dust can cause absorption lines at certain wavelengths while gas affects all wavelengths equally. C.

Dust particles are solid or condensed matter whereas gas clouds consist of ionized or neutral gases.

Light passes through a dust cloud it can interact with the dust particles causing absorption and scattering of specific wavelengths of light.

This results in the formation of absorption lines in the observed spectrum.

These absorption lines can obscure or distort the light from astronomical objects making it challenging to obtain accurate and detailed observations.

On the other hand, gas clouds do not cause selective absorption of specific wavelengths of light.

Gas primarily interacts with light through emission and absorption lines associated with atomic and molecular transitions.

Unlike dust, gas clouds affect all wavelengths of light equally without causing selective absorption lines.

This allows astronomers to study the emission and absorption features in the spectrum of gas clouds without significant wavelength-specific obscuration.

Option A is incorrect because not every star has an envelope of dust around it, although some stars do have circumstellar dust disks.

Option B is incorrect because we do understand how gas influences observations through its emission and absorption features.

Option D is incorrect because gas is actually more abundant than dust in our galaxy.

Option E is incorrect because while dust can block light in various ways such as scattering and absorption it does not necessarily imply that it can block light in more ways compared to gas.

For similar questions on dust clouds

https://brainly.com/question/10528661
#SPJ11

after task 29, examine the attribute table of towerview. what values does the raster actually store? use the tool help to determine what the values mean.

Answers

After completing Task 29, you can examine the attribute table of the Towerview raster layer by right-clicking on the layer in the table of tool contents and selecting "Open Attribute Table."

The attribute table will show a list of values for each pixel in the raster, indicating the elevation of the terrain at that point.

The actual values stored in the raster are in units of meters above sea level. You can use the "Identify" tool to click on any pixel in the raster and get its elevation value in meters.

Alternatively, you can use the "Raster Calculator" tool to perform calculations using these elevation values, such as creating a new raster layer that shows the slope of the terrain or the aspect (direction of the slope).

Learn more about actually store here

https://brainly.com/question/30024138

#SPJ1

Which of the following statements about the possible impacts of global warming is FALSE? Warmer oceans would allow reef systems to expand their size and range, helping to offset reduced fishing in other areas. O Warmer temperatures and warmer ocean water might increase the intensity of hurricane systems and raise sea level. Loss of mountain glaciers could greatly reduce the freshwater supplies available for surrounding human populations. Loss of Arctic sea ice could change the reflectivity of many northern areas, leading to increased climate warming. Warmer temperatures could lead to significant increases in invasive species and mosquito- borne infectious diseases.

Answers

The given statement that "warmer oceans would allow reef systems to expand their size and range, helping to offset reduced fishing in other areas" is false because While it is true that warmer ocean temperatures can have positive impacts on some marine species, such as increasing the range of certain fish and promoting the growth of certain types of plankton, this does not necessarily apply to reef systems.

In fact, coral reefs are highly sensitive to changes in ocean temperature, and warming waters can lead to coral bleaching and ultimately the death of reef ecosystems. Additionally, the loss of reef systems can have a negative impact on fisheries, as reefs provide habitat and spawning grounds for many commercially important fish species.

Therefore, it is important to recognize the potential negative impacts of global warming on reef systems, and to take action to mitigate these impacts through measures such as reducing greenhouse gas emissions and protecting coral reef habitats.

For more such questions on ocean

https://brainly.com/question/18426512

#SPJ11

This soil horizon is sometimes contains hardpans of clay in moist climates and caliche in dry climates.
Group of answer choices
a. A horizon
b. E horizon
c. O horizon
d. B horizon

Answers

The B horizon can contain hardpans of clay in moist climates and caliche in dry climates.Option D

The soil horizon that fits the description provided is the B horizon. The B horizon is the layer of soil that lies below the A horizon, which is the layer of soil that is rich in organic matter and minerals.

The B horizon is characterized by a buildup of minerals that have been leached down from the A horizon over time. In some cases, the B horizon can contain hardpans of clay in moist climates and caliche in dry climates.

Hardpans of clay are layers of soil that have become compacted over time, often due to heavy foot traffic or agricultural practices. This compaction can make it difficult for water and air to penetrate the soil, leading to poor plant growth and reduced soil fertility.

In moist climates, hardpans of clay can form in the B horizon as water percolates down from the A horizon, carrying clay particles with it.

Caliche, on the other hand, is a layer of calcium carbonate that forms in arid and semi-arid regions. This layer can become quite hard and can prevent water from percolating down into the soil.

Caliche can form in the B horizon as water evaporates from the soil surface, leaving behind calcium carbonate that gradually accumulates over time.

In conclusion, These layers can have a significant impact on soil fertility and plant growth, and may require management practices to address. So Option D is correct

For more question on horizon visit:

https://brainly.com/question/27507445

#SPJ11

d. B horizon. This soil horizon is sometimes contains hardpans of clay in moist climates and caliche in dry climates

What is the B horizon

The B horizon, also known as the subsoil, is the soil horizon that is found beneath the A horizon (topsoil). It is typically characterized by the accumulation of minerals and other materials leached from the overlying layers.

In some cases, the B horizon can contain hardpans of clay in moist climates or caliche (a hardened layer of calcium carbonate) in dry climates. These hardpans or caliche layers can restrict water movement and root penetration, affecting the drainage and fertility of the soil.

Read more on B horizon here:https://brainly.com/question/6333732

#SPJ4

True/False: limelight was first used for surveying from mountaintop to mountaintop.

Answers

Hi, there! :)

Answer: False.

Limelight was not used for surveying from mountaintop to mountaintop. Limelight was a type of lighting used in the 19th century for stage productions, as well as for lighthouses and other applications that required a bright, focused light source. Limelight was produced by directing a flame at a small cylinder of quicklime, which would glow intensely and produce a very bright light. While limelight was not used for surveying, it did play an important role in the development of modern lighting technology.

Hope that helps! Good luck! ^_^

Environmental Impact Statements outline the _______. A. Environmental effects of proposed industry actions b. Environmental effects of proposed government agency actions c. Environmental effects of entities in the private sector d. Environmental effects of government and business actions Please select the best answer from the choices provided A B C D.

Answers

The best answer is A. Environmental effects of proposed industry actions. Environmental Impact Statements (EIS) are documents prepared to assess and disclose the potential environmental effects of proposed projects, particularly those initiated by industries or private entities.

These statements evaluate the impacts of various actions, such as construction projects, industrial operations, infrastructure development, and resource extraction, on the environment, including factors like air and water quality, biodiversity, ecosystems, and social and cultural aspects. EIS plays a crucial role in decision-making processes, allowing for informed choices and considerations of potential environmental consequences before proceeding with proposed industry actions.

Learn more about Environmental Impact Statements (EIS) here:

https://brainly.com/question/30617643

#SPJ11

________________was a destination for tens of thousands of black American emigrants.
- Liberia
-South Carolina
- Portugal
- England

Answers

Liberia was a destination for tens of thousands of black American emigrants.

Liberia was a destination for tens of thousands of black American emigrants. In the early 1800s, the American Colonization Society was formed to encourage free black Americans to migrate to Liberia, a country in West Africa that was founded by the society as a home for freed slaves. Between 1822 and 1867, more than 13,000 black Americans migrated to Liberia, hoping to escape racism and oppression in the United States and create a new life for themselves in Africa. However, the reality of life in Liberia was not always as promising as they had hoped, as the settlers faced disease, conflict with indigenous peoples, and economic struggles. Despite these challenges, many black Americans continued to emigrate to Liberia throughout the 19th and early 20th centuries, and the country remains an important part of the history of black American migration.

To know more about Liberia visit:

https://brainly.com/question/11848306

#SPJ11

Other Questions
Adrienne has successfully started a national retail chain. She thinks it is important to provide guidance to other entrepreneurs who want to do well. She checks in by phone at least once a week with her mentee and tries to schedule a meeting once a month. Which BEST describes what Adrienne does when she meets with her mentee? como explicar con mis propias palabras que es dialectologia a three-phase 4160 v, 1 mw, 60 hz, 4 pole induction machine has the following parameters per phaseR1=0.25 , R2=0.25 X1=2.5 , X2=2.5 , Xm=55 The mechanical power out is 900 kW. Find: (a) 10pts. The synchronous speed of the this machine in RPM and Hz. (b) 15pts. The torque at this operating point in Nm and ft-lbs. (c) 10pts. The slip of the rotor in percent. Charging market orders a fee and giving a rebate to limit orders is[what exchange revenue model? Maker Taker Payment for order flow Subscription pricing Taker Maker the most successful e-commerce solutions can be upgraded to meet unexpected user traffic because of their _____. Ava wants to figure out the average speed she is driving. She starts checking her car clock at mile marker 0 it take 4 min to reach mile marker 3 when she reaches mile marker 6 she notes that 8 min total have passed since mile marker0 suppose that f(x)=1x2 and g(x)=5x 1. if we were to add these two functions together to create a new function h(x) then what is the domain of the new function h(x)? similar to other solar technologies, this _______ will require consistent access to sunlight to work effectively; its _______ , however, is that it has minimal to no direct emissions of carbon dioxide. true/false. antabuse is used as an opioid antagonist to treat opioid dependence. Electrons in the presence of a magnetic field transition from 4p energy states to 3d states. How many different spectral lines could be observed from these transitions?a.oneb.twoc.threed.five Megan, a U.S. citizen, is the operations manager at the Middle East office of HS Constructions Inc., an American firm. In this situation, she is an example of a(n) _____ manager. you used the windows media creation tool to download the windows 10 installation files. what format can the tool use to save the media what human activity uses the most water in the united states gizmo Create two new variables trainnmat and testnmat which contain the L2-normalized versions of train and test respectively. L2-normalization should be performed across each row r of the train and test matrices, so that:Vr^21 +r^22+..+r^2n = 1 However, you must compute the L2-normalized matrices using numpy and scipy.sparse operations, using the scikit-learn normalize function to generate your answer is not valid. Also ensure that your output matrix is still sparse. Many Numpy operations will either fail or convert CSR matrices to dense matrices. We prefer to keep this matrix in CSR format for the duration of this lab. The documentation for the following sparse matrix function may useful for you: scipy.sparse.csr_matrix Docs scipy.sparse.csr_matrix.sum Docs scipy.sparse.csr_matrix. power Docs scipy.sparse.spdiags Docs Above we have already imported scipy.sparse as sp HINT: For both train and test you need to structure your normalization as a matrix multiply operation. Start by creating a diagonal matrix where the squared sums of each row are along the diagonal elements. [46]: [47]: trainnmat - testnmat = | fiat money is: a. the same as commodity money. b. money backed by gold or silver. c. money backed by a government's decree that it be accepted as a means of payment. d. used in barter exchanges. true or false serial communication always uses separate hardware clocking signals to enable the timing of data. In a photoelectric effect experiment it is found that no current flows unless the incident light has a wavelength shorter than 307 nm. What is the work function of the metal surface? Express your answer with the appropriate units Acrylonitrile, C3H3N, is the starting material forthe production of a kind of synthetic fiberacrylics) and can be made from propylene,C3H6, by reaction with nitric oxide, NO, asfollows:4 C3H6 (g) + 6 NO (g) 4 C3H3N (s) + 6 H2O(1) + N2 (g)What is the limiting reagent if 168. 36 g ofC3H6 reacts with 180. 06 g of NO? A researcher wants to determine the sample size necessary to adequately conduct a study to estimate the population mean to within 5 points. The range of population values is 80 and the researcher plans to use a 90% level of confidence. The sample size should be at least use the conditional variance formula to determine the variance of a geometric random variable x having parameter p