The three wave pulses in (Figure 1) travel along the same stretched string. Part A Rank in order, from largest to smallest, their wave speeds va, Ub, and U. To rank items as equivalent, overlap them.

How much heat is transferred in order to raise the silver to its melting point.

The amount of heat needed to raise a substance's temperature by one degree Celsius in one gram, also known as specific heat.

Typically, calories or joules per gram per degree Celsius are used as the units of specific heat. For instance, water has a specific heat of 1 calorie (or 4.186 joules) per gram per degree Celsius.

The notion of specific heat was developed by the Scottish scientist Joseph Black in the 18th century as a result of his discovery that equal masses of different substances required varying quantities of heat to raise them through the same temperature range.

Therefore, How much heat is transferred in order to raise the silver to its melting point.

To learn more about melting point, refer to the link:

https://brainly.com/question/29578567

#SPJ1

Answer: 77.5 m/s

Explanation: We can use the following equation to calculate the velocity of the roller coaster car:

velocity = sqrt( (normal force + weight) * radius / mass)

where weight is the gravitational force acting on the car (mass * g)

Substituting the given values:

velocity = sqrt( (-12,000 N + (600 kg * 9.8 m/s^2)) * 6 m / 600 kg) = sqrt( -12,000 N + 5,880 N) * 6 m/s = sqrt( -6,120 N) * 6 m/s = 77.5 m/s (round to the nearest tenth)

The negative sign on the normal force indicates that it is acting in the opposite direction of the gravitational force. This can happen when the roller coaster car is upside down, which is the case in this problem

You would need to survive the thermosphere: The temperature ( 2000° C or more), the cosmic radiation and charged particles.

The layer of the Earth's atmosphere known as the thermosphere is situated above the mesosphere and under the exosphere. The thermosphere is the bigger portion of the ionosphere because ultraviolet energy inside this layer of the atmosphere promotes photoionization/photodissociation of molecules, creating ions.

The remaining atmospheric gases stratify at these high elevations according to molecular mass. As a result of the sun's intensely powerful energy being absorbed, atmospheric temperatures rise with altitude. Temperatures, which can reach 2,000 °C or higher, are largely reliant on solar activity.

Learn more about thermosphere here:

https://brainly.com/question/13497783

#SPJ1

The temperature of a gas in which the atoms are moving very, very rapidly is hot.

The correct option is C.

Temperature is defined as the degree of hotness or coldness of something.

Temperature increase results when heat energy is added to a substance resulting in an increase in the kinetic energy of the partticles of the substance.

The effect of temperature increase on substances includes an increase in the motion of the particles of the substances, a color change, an increase in pressure for gases, etc.

Learn more about temperature at: https://brainly.com/question/25677592

#SPJ1

The momentum of a 250 g ball travelling at 40 m/s is 10 kg m/s.

Velocity is a measure of the rate of change in a physical quantity over time. It is a vector quantity, meaning it is composed of both magnitude and direction. Velocity measures the speed of an object at a specific point in time, as well as the direction of its motion.

Momentum is a vector quantity, meaning it has both a magnitude and a direction. In this case, the magnitude of the momentum is 10 kg m/s and the direction is the same as the velocity, i.e. 40 m/s.

Momentum is a product of mass and velocity. It is calculated by multiplying mass (in kg) by velocity (in m/s) and then multiplying the answer by the direction of the velocity (1 for positive and -1 for negative). In this case, the momentum is calculated as follows:

Momentum = Mass x Velocity x Direction
= 250 g x 40 m/s x 1
= 10 kg m/s

In physics, the law of conservation of momentum states that the total momentum of a system remains constant. This means that if an object has a certain momentum, it will keep this momentum unless an external force acts on it to change it. The only way to change the momentum of the 250 g ball travelling at 40 m/s is to apply an external force to it, such as a collision or a frictional force.

In conclusion, the momentum of a 250 g ball travelling at 40 m/s is 10 kg m/s. This momentum can only be changed by applying an external force to the ball.

To know more velocity click-
https://brainly.com/question/24445340
#SPJ4

Explanation: Momentum: It is defined as the motion of a moving body. Or it is defined as the product of the mass or velocity of an object.

The formula of momentum is: p=mt

where,  

p = momentum =?

m = mass = 1.5 kg

v = velocity = 10 m/s

Now put all the given values in the above formula, and we get:

p = 1.5 kg * 10 m/s

p = 15kg.m/s

Therefore, the momentum of the ball is 15 kg.m/s

Only sodium work function is less than the energy of the photon

max Kinetic Energy (Kmax) = Ephoton - Wfunction.

What is Work Function?

When a free electron tries to leave the metal surface, this positive charge pushes it back. For electrons, this force creates a "surface barrier." Only until external energy is used to break through the surface barrier will the free electrons be able to escape the metal surface. "Electron emission" is the process of releasing electrons from a metal surface.

The work function of a metal is the amount of additional energy required to remove an electron from a metal surface barrier. The term "work function" refers to the minimal amount of energy needed for an electron to simply escape from the metal surface.

Energy of a photon of wavelength (lambda) 400 nm = hf = hc/lambda = 3.105 eV

Work functions of

Sodium = 2.28 eV

Copper = 4.7 eV

Gold = 5.1 eV

In order for the metals to exhibit the photoelectric effect, their electrons must absorb a photon of energy that is greater than their work functions!

Learn more about Work Function from given link

https://brainly.com/question/19427469

#SPJ4

The voltages V2, V3, V4 and V1 are ranked in decreasing order of voltage value as follows: V2 > V3 > V1 >V4

The difference in potential or pressure that pushes or ignites the passage of electrical current in a conducting loop is known as a voltage.

The following formula can be used to determine the current flowing through the circuit:

I = V/ R

The conductivity formula is presented as follows;

σ = l / RXA

Where;

σ = The material's conductivity

| = The length

R stands for electrical resistance.

A is the conductor's cross-sectional area.

Therefore;

R = V/I

R = l / A σ

V/I = l × L / A × σ

Based on the cylinders' dimensions, which were discovered using a similar query, we discover;

V1 = 3V4

V2 = 8 V4

V3 = 4 V4

The rank is -  V2 > V3 > V1 >V4

To learn more about voltages from given link

https://brainly.com/question/30191443

#SPJ4

The focal length of a concave mirror of distant skyscraper is  127.65 cm.

The formula for the focal length of a concave mirror is:

1/f = (1/d) + (1/di)

Where d is the distance from the object to the mirror, di is the distance from the image to the mirror, and f is the focal length.

Given that d = 175 cm and |hi| = 1.07 m, we can calculate the distance from the image to the mirror (di) as follows:

di = (h/|hi|) * d = (59 m / 1.07 m) * 175 cm = 96.49 m

Now we can use this value of di in the above mentioned formula to get the focal length of the mirror :

1/f = (1/d) + (1/di) = (1/175 cm) + (1/-96.49 m)

f = -1/((1/175 cm) + (1/-96.49 m))

f = -1/(1/175 cm - 1/96.49 m)

f = -175 cm / (-1.085)

f ≈ 127.65 cm

To know more about  focal length click below:

https://brainly.com/question/16188698#

#SPJ4

When the system performs mechanical work, internal energy decreases.

Explanation:

Likewise, U (internal energy) = Q (heat) + W (work completed). If the system performs work, then work is negative and internal energy declines.

If done quickly, the internal energy will drop, which will lead to a drop in temperature. Any internal energy loss, if gradual, is offset by heat entering the system to maintain the same temperature.

When mechanical work is done on a system, the internal energy of the system increases. The temperature of the system does not necessarily change.

What is temperature?
Temperature is a physical property of matter that quantitatively expresses the common notions of hot and cold. It is measured by a thermometer and usually expressed in units of degrees Celsius (°C) or Fahrenheit (°F). Temperature is an important parameter in many natural processes and is an essential component of weather forecasting. Temperature is related to the amount of energy in a system; the higher the temperature, the greater the average energy of the system's constituent particles. The average kinetic energy of the particles in a system is proportional to the absolute temperature. Temperature also has an effect on the physical properties of matter, such as its phase and viscosity. Heat transfer from one system to another is a major component of thermodynamics, and is dependent on the temperature difference between the two systems.

To learn more about temperature

https://brainly.com/question/27944554

#SPJ4

A)If an iron atom has a magnetic dipole moment of about 1.8×10^−23A⋅m2.

B)Then the dipole is  3.4 x 10^-22 A.m^2 and should be 2.7 x 10^-22 N.m

Part A:

To determine the dipole moment of an iron bar, we need to know the number of atoms present in the bar and their individual magnetic dipole moments. The formula for dipole moment is given by:

dipole moment = number of atoms * individual atomic dipole moment

The volume of the bar is (9.9 cm) x (1.3 cm) x (1.0 cm) = 13.47 cm^3.

If we assume the density of iron is 7.87 g/cm^3, we can find the mass of the bar as:

mass = density x volume

= 7.87 g/cm^3 x 13.47 cm^3 = 106.07 g

Since the atomic mass of iron is about 55.847 g/mol, we can find the number of atoms present in the bar as:

number of atoms = mass / atomic mass

= 106.07 g / 55.847 g/mol = 1.91 x 10^22

Therefore, the dipole moment of the iron bar can be found as:

dipole moment = number of atoms x atomic dipole moment

= 1.91 x 10^22 x 1.8 x 10^-23 A.m^2 = 3.42 x 10^-22 A.m^2

The answer should be 3.4 x 10^-22 A.m^2

Part B:

The torque on a dipole in a magnetic field is given by the formula:

torque = dipole moment x magnetic field x sin(theta)

Where theta is the angle between the dipole moment and the magnetic field. Since the bar is placed at right angles to the field, theta is 90 degrees and the sine is 1.

Therefore, the torque can be found as:

torque = dipole moment x magnetic field

= 3.4 x 10^-22 A.m^2 x 0.8 T = 2.7 x 10^-22 N.m

The answer should be 2.7 x 10^-22 N.m

To learn more about dipole, check out

https://brainly.com/question/11626115

#SPJ4

Explanation:

normal force = mass times gravity

Fn = MG

Fn=?

M=800kg

G=4m/s

Fn = 800*4

Fn = 3200 N

A + B are displayed in vector C in the second row. The vectors A and B are displayed in the first row when they are at the origin.

Two vectors, A and B, are provided for our consideration.

We must choose the vector that represents vectors A and B from the possibilities shown.

Therefore, we first reposition vector A so that the tail of it begins with the head of vector B.

Its magnitude and direction ought to stay the same even if we alter the location.

The resultant vector now begins at the head of vector A and ends at the tail of vector B after utilizing triangular vector addition.

We simply follow all of the vectors till we find it.

The sum of these two vectors is represented by the vector C.

Hence C = A+B

To learn more about vectors click here https://brainly.com/question/14447709

#SPJ4

a. The period of the oscillation is 0.833 seconds.

b. The total energy in the system is 0.2646 J

c. The potential energy when the spring is stretched 0.253 m is 0.0162 J

d. The kinetic energy  when the spring is stretched 0.253 m is 0.0078 J

The displacement of the mass on the spring is given by the equation x(t) = 0.7cos(1.2t+4.3), where x is in meters and t is in seconds.

The potential energy of a spring-mass system is given by 1/2 kx^2, where

Using this equation, we can find the spring constant k by equating the equation for the potential energy to that of the displacement equation:

1/2 kx^2 = 1/2 * 0.7^2 * cos^2(1.2t+4.3)

Solving for k, we get k = 0.7^2 * 1.2^2

a. The period of the oscillation is given by the reciprocal of the frequency, which is 1/1.2=0.833 seconds.

b. The total energy in the system is given by the sum of the potential and kinetic energy.

As we know the spring constant we can calculate the potential energy when mass is at the extreme position,

Potential energy = 1/20.7^21.2^2*0.7^2 = 0.2205 J.

As we know, the mass of the system we can calculate the kinetic energy when mass is at the extreme position,

Kinetic energy = 1/20.31.2^2*0.7^2 = 0.0441 J.

Total energy = kinetic + potential = 0.2205 + 0.0441 = 0.2646 J

c. The potential energy when the spring is stretched 0.253 m can be calculated using the formula 1/2 kx^2, where x is the displacement from the equilibrium position.

Potential energy = 1/20.7^21.2^2*0.253^2 = 0.0162 J

d. The kinetic energy when the spring is stretched 0.253 m can be calculated by using the formula 1/2mv^2, where

v = dx/dt = -1.20.7sin(1.2t+4.3)

Kinetic energy = 1/20.3(-1.20.7sin(1.2t+4.3))^2 = 0.0078 J

Learn more about the Spring-mass system here:

https://brainly.com/question/23161517

#SPJ4

Two clay pieces—one white and the other gray—are hurled through the air. The white clay has a momentum of 25 kg/m/s.

The momentum will be conserved in each direction separately for a collision if the moving objects are travelling in two dimensions (for example, x and y) (as long as there is no external impulse in that direction). In other words, both before and after the impact, the total momentum will be the same in the x direction.

The momentum of the cue ball is defined as mass times velocity. Because it isn't moving yet, the 8 ball has no momentum. Due to the conservation of momentum, if you strike it straight on and the cue ball stops at the point of collision, all of its momentum must transfer to the 8 ball.

To learn more about momentum refer to:

https://brainly.com/question/24030570

#SPJ1

Weight and mass are measurements of the amount of substance and the gravitational pull, respectively, on an item. The quantity of matter in an item is its mass. Kilograms are used to measure mass (kg).

Weight is the force of gravity acting on an object, whereas mass is the quantity of "matter" (though "matter" may be difficult to define) in an object.  To put it another way, a 1.0 kilogram object weighs about 9.81 newtons on the surface of the Earth, which is equal to its mass times the gravitational field's strength. The object weighs the same amount whether it is on Mars, where gravity is weaker, Saturn, where gravity is stronger, or space, where gravity is light and the object is very far from any important sources of gravity.

The attractive force between two objects is given by the equation F = G * (m1 * m2) / r^2, where F is the force, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between the objects.

Given that F = 0.0053 N, m1 = 730 kg, and r = 0.088 m, we can solve for m2:

0.0053 N = (6.67 x 10^-11 N*(m^2)/(kg^2)) * (730 kg) * m2 / (0.088 m)^2

Therefore, m2 = 0.0053 N * (0.088 m)^2 / (6.67 x 10^-11 N*(m^2)/(kg^2) * 730 kg)

m2 = 0.0053 N * (0.088 m)^2 / (6.67 x 10^-11 N*(m^2)/(kg^2) * 730 kg)

m2 = 0.0053 / (6.67 * 10^-11 * 730) = 0.0053 / (4.6*10^-9) = 1144.78 kg

So the mass of the second object is approximately 1144.78 kg.

To know more about mass of an object visit:

https://brainly.com/question/6240825

#SPJ1

The Rank of the vectors is D A C B.

What is Vectors?

In contrast to a scalar number, a vector quantity also includes a direction component that aids in locating one point in relation to another. Here is more information on vectors. A vector in mathematics is a quantity that not only expresses magnitude but also motion or position of an object in relation to another point or object. In mathematics, a vector's magnitude is defined as the length of a segment of a directed line, and the vector's direction is indicated by the angle at which the vector is inclined.

A vector primarily consists of two elements, the horizontal component and the vertical component. The horizontal component's value is cos, and the vertical component's value is sin. Here is further information about vector components.

Learn more about Vectors from given link

brainly.com/question/25705666

#SPJ4

You would need to survive the thermosphere: The temperature ( 2000° C or more), the cosmic radiation and even solar activities, low air pressure and low air molecule.

The thermosphere is the layer of the atmosphere that is the thickest. It begins at a height of roughly 80 km and rises to about 550 km.

The thermosphere's highlights include the following:

Learn more about thermosphere here:

https://brainly.com/question/15289804

#SPJ1

During a full breath, the person's lung expends a total of 8.3 joules of energy.

The SI unit of energy, the joule (symbol J), measures a substance's ability to produce heat or do work. The work (or energy wasted) by a force of one newton (N) operating over an one-meter long distance is equivalent to one joule (m).

For every Coulomb of charge that a 12-volt battery transfers from a low energy position to a high energy location, it produces 12 Joules of energy. Therefore, a battery's voltage rating only quantifies the energy change of each coulomb of charge that is transferred between terminals.

To know more about Joules visit:

https://brainly.com/question/18596314

#SPJ4

Answer:

No

Explanation: An opinion is a judgment, viewpoint, or statement that is not conclusive, rather than facts, which are true statements.

Answer:

He is his choice to leave with

The gravitational force has an acceleration of 14.

To learn more about acceleration refer to:

https://brainly.com/question/460763

#SPJ1

Part A Mark the points in which the magnetic field is zero.The points in which the magnetic field is zero are O 2 and O 4.

A magnetic field is a force field that is created by a magnet or a moving electric charge. It is characterized by the direction of the field lines, which show the direction of the magnetic force at a given point, and the magnitude of the field, which is determined by the strength of the magnet or the amount of electric charge. Magnetic fields are used in a variety of applications, including in electric motors, generators, and MRI machines. They can also be found in natural phenomena such as the Earth's magnetic field.

To know more about magnetic field please refer:

https://brainly.com/question/23096032

#SPJ4

So, the initial temperature of the gas in kelvins is 375.6 K.

Hi! Here I will help you to solve the problem about the relationship between volume and temperature of the gas in a closed system. Look again at the sentence in the problem. It states that gas has a constant pressure in every condition. In other words, this is an isobaric process that also indirectly leads to Charles' Law. Charles' Law states the proportionality between the volume of a gas in a closed system and its absolute temperature. The general equation of Charles' Law in general, is expressed in the equation:

[tex] \boxed{\sf{\bold{\frac{V}{T} = C}}} [/tex]

With the following condition:

In this case, we can calculate the relationship between changes in temperature and changes in gas volume in a closed system with the following equation:

[tex] \boxed{\sf{\bold{\frac{V_i}{T_i} = \frac{V_f}{T_f}}}} [/tex]

With the following condition:

What was asked?

Step by step:

[tex] \sf{\frac{V_i}{T_i} = \frac{V_f}{T_f}} [/tex]

[tex] \sf{\frac{2.40}{T_i} = \frac{2.00}{313}} [/tex]

[tex] \sf{2.00(T_i) = 2.40(313)} [/tex]

[tex] \sf{T_i = \frac{2.40(313)}{2.00}} [/tex]

[tex] \sf{T_i = 1.20(313)} [/tex]

[tex] \sf{\bold{T_i = 375.6 \: K}} [/tex]

So, the initial temperature of the gas in kelvins is 375.6 K.

D. produced a photograph that showed the creation of two particles when a particle of light was destroyed.

In 1933, Irène and Frédéric Joliot-Curie produced a photograph that showed the creation of two particles when a particle of light was destroyed, which was Einstein's prediction in the concept of pair production, which was a process in which two particles are created when a photon is absorbed. This photograph was the first experimental evidence of this process, which was a significant discovery in the field of nuclear physics.

Hyperopia is the refraction abnormality does he have.

What is Hyperopia ?

Farsightedness (farsightedness) is a common visual impairment in which distant objects can be seen clearly, but near objects may be blurred.

See your eye doctor if your farsightedness is preventing you from doing your job, or if the quality of your vision is affecting your enjoyment of activities. He or she can determine your degree of farsightedness and advise you on how to correct your vision .The degree of farsightedness affects your ability to concentrate. People having severe farsightedness can only see distant objects and things clearly, while people with mild farsightedness can see near objects clearly . This condition can be easily corrected with glasses or contact lenses. Another treatment option is surgery.

To learn more about Hyperopia ,click the given link;

https://brainly.com/question/4572750

#SPJ4

Coulomb's law, which states that the force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them, can be used to determine the size of the electric field at point P.

E = k * Q / r2 is the formula for the electric field resulting from a single point charge. where Q is the point charge, r is the distance from the point charge, k is the Coulomb's constant (8.99 * 109 N*m2/C2), and E is the electric field.We must sum the electric fields resulting from each charge in order to determine the overall electric field at point P.

E equals k * (Q1/d1 + Q2/d2 ).where d1 = 1.50 m, d2 = 1.90 m, Q1 = 1.90 x 10-6 C, and Q2 = 1.10 x 10-6 C.E = 1.90 * 10-6 C / (1.50 m) + 1.10 * 10-6 C / (1.90 m) * (-1.90 * 10-6 C / (1.90 m)) * (-1.10 * 10-6 C / (1.90 m))

E = -1.07 * 10^6 N/C

Therefore, the electric field at point P is 1.07 * 106 N/C in size.

To know more about electric field please refer:

https://brainly.com/question/15800304

#SPJ4

The de Broglie wavelength of the paramecium is 3.313 x 10^-19 m.

And the fraction of de Broglie wavelength of the paramecium represents about 2.2 x 10^-17 or 0.00000022% of its 150um leng

The de Broglie wavelength of a particle is given by the equation:

wavelength = h / (mass * velocity) where

So, wavelength = (6.626 x 10^-34 Js) / (2*10^16 kg * 10^-3 m/s) = 3.313 x 10^-19 m

To calculate the fraction of the paramecium's 150um length that this wavelength represents, you would divide the wavelength by the length and multiply by 100%

3.313 x 10^-19 / 150 x 10^-6 = 2.2 x 10^-17

So the de Broglie wavelength of the paramecium represents about 2.2 x 10^-17 or 0.00000022% of its 150um length.

Key points:

Learn more about de Broglie wavelength here:

https://brainly.com/question/10679287

#SPJ4

The 7 - 16 orbitals are in energy level 6.

What is orbitals ?

A mathematical function called orbitals in physics and chemistry illustrates the wave-like behaviour of an electron or a pair of electrons in an atom. Using this function, one can figure out the likelihood of discovering an electron near the nucleus.

What is energy level ?

Energy level, also known as energy state, is any discrete value from a range of total energy values for a system of subatomic particles, such as an atom or a nucleus, that are constrained by a force in a finite region.

Therefore, 7 - 16 orbitals are in energy level 6.

Learn more about orbitals from the given link.

https://brainly.com/question/20319149

#SPJ4

Answer:

No its not, the correct option is A) It requires a medium

Explanation:

Sound can go anywhere even in space, so using a medium, is an option , but it doesn't only travel through them.

Have a wonderful day! :-)