three metals, a, b and c, of equal mass, have heat capacities of 0.3 j/goc, 0.4 j/goc, and 0.5 j/goc, respectively. which of these metals will have the largest increase in temperature if the same amount of heat is added to the each of their systems?

An engine using gasoline to power a car and mixing glue and laundry powder to create putty are both examples of chemical reactions.

Gasoline is considered an energy source due to its ability to release stored chemical energy in the form of heat and mechanical work when it is burned in an engine. When gasoline is ignited in an engine, the chemical energy stored in its molecular bonds is released, causing a rapid combustion reaction that generates heat and expanding gases that push the pistons and create mechanical work.

The energy content of gasoline is typically measured in units of joules or British thermal units (BTUs), which are used to quantify the amount of energy released during combustion. Gasoline is a widely used and important energy source, but its combustion also produces harmful emissions that contribute to air pollution and climate change.

To learn more about Gasoline visit here:

brainly.com/question/29991915

#SPJ4

When plane-polarized light passes through a solution of an optically active compound, it rotates the plane of polarization of the light. This phenomenon is referred to as optical rotation or rotary dispersion.

When a beam of unpolarized light passes through a solution of an optically active substance, its plane of polarization is rotated by an angle called the optical rotation angle. Optical activity is a property of a molecule's three-dimensional structure, which is why some molecules are optically active while others are not. The two isomers of a chiral molecule are enantiomers, which means they have the same physical and chemical properties but are mirror images of each other.

The optical rotation angle of each enantiomer is equal in magnitude but opposite in sign to that of the other enantiomer. When a racemic mixture of equal quantities of both enantiomers is studied, no optical rotation is observed. Because the rotations induced by each enantiomer cancel out. When plane-polarized light passes through a solution of an optically active compound, it rotates the plane of polarization of the light. This phenomenon is referred to as optical rotation or rotary dispersion. Optical rotation is defined as the rotation of the plane of polarization of linearly polarized light as it passes through a sample. The angle of rotation is determined by the molecular structure of the sample and the concentration of the sample in solution.

Learn more about Optical rotation here:

https://brainly.com/question/30669570

#SPJ11

A monoprotic acid only has one acidic proton per molecule, but a polyprotic acid can donate numerous protons per molecule and possesses more than one acidic proton.

The capacity of an acid to contribute protons (H+ ions) determines its strength. Each acidic proton in a polyprotic acid becomes tougher to remove as each donation results in a greater loss of negative charge. Hence, polyprotic acids are susceptible to partial or whole dissociation reactions and can have a variety of dissociation constants (Ka values). Phosphoric acid (H3PO4) and sulfuric acid are examples of polyprotic acids (H2SO4).

Monoprotic acids, on the other hand, only have one acidic hydrogen atom per molecule, which can give one proton. For monoprotic acids, the dissociation reaction is complete and can be described by a single dissociation constant (Ka). Acetic acid and hydrochloric acid (HCl) are examples of monoprotic acids (CH3COOH).

learn more about polyprotic acid here:

https://brainly.com/question/29993754

#SPJ4

The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the equation C(s) + O2(g) → CO2(g)  is -540.6 kJ.

From the equation, the mole ratio of carbon to carbon dioxide is 1:1. Therefore, the number of moles of carbon reacted can be determined as follows:

Mass of carbon = 18.6 g

Molar mass of carbon = 12.01 g/mol

Number of moles of carbon = (18.6 g)/(12.01 g/mol) = 1.549 moles

Since the change in enthalpy for the reaction is given as -349 kJ/mol, we can calculate the enthalpy change for the given mass of carbon as follows: Enthalpy change = Number of moles of carbon × Change in enthalpy. Enthalpy change = 1.549 moles × (-349 kJ/mol).Enthalpy change = -540.6 kJ (rounded off to two significant figures)Therefore, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the given equation is -540.6 kJ.

More on  enthalpy change: https://brainly.com/question/17056641

#SPJ11

The distillation temperature would be > 80 degrees. The composition of the few drops of the distillate would be 40℅ benzene and 60℅.

The boiling point of a liquid is the temperature at which the vapor pressure of the liquid, a pure compound, or a combination equals 1 atm.

We are aware that pure benzene has a boiling point of 80 °C.

Pure toluene has a boiling point of 106 °C.

As benzene has a lower boiling point than toluene, it distills first. Thus, the distillation temperature is greater than 80 °C.

The mixture contains 40 percent benzene and 60 percent toluene by percentage.

Distillation is a process used to separate components of a mixture based on differences in their boiling points. The mixture is heated to vaporize the components, and then the vapor is condensed back into a liquid form. The condensed liquid contains a higher concentration of the more volatile components with lower boiling points.

Distillation is widely used in various industries, including chemical, pharmaceutical, and food production, to purify substances, extract desired components, or separate different chemical compounds. For example, it can be used to purify water, extract essential oils from plants, or separate crude oil into different fractions such as gasoline, diesel, and kerosene.

To learn more about Distillation visit here:

brainly.com/question/29037176

#SPJ4

The last solution is the correct answer to this question. The atomic number of an element remains the same when γ-radiation is emitted.

Gamma radiation (γ-radiation) is a form of electromagnetic radiation that does not carry any charge or atomic mass. Therefore, it does not directly affect the atomic number (Z) or mass number (A) of an atom.

The atomic number of an element represents the number of protons in the nucleus of an atom. When a radioactive decay occurs, the nucleus of the atom changes, which may result in a change in the number of protons. However, γ-radiation is not a type of radioactive decay that results in a change in the number of protons or atomic number of an element.

Learn more about Gamma radiation here brainly.com/question/9815840

#SPJ4

Real gases behave most like ideal gases under conditions of high temperature and low pressure. Option 2 is correct.

This is because at high temperatures, the kinetic energy of gas molecules increases, causing them to move faster and collide more frequently, which reduces the intermolecular forces between the gas molecules. At low pressures, the gas molecules are farther apart and the intermolecular forces are weaker, allowing the gas molecules to move more freely and behave more like an ideal gas.

At high pressures and low temperatures, the gas molecules are closer together and the intermolecular forces are stronger, causing deviations from ideal gas behavior. Hence the correct option is 2.

To know more about ideal gas, here

brainly.com/question/28257995

#SPJ4

The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].

Learn more about electron geometry: https://brainly.com/question/7283835

#SPJ11

The proportion of students that scored higher than Willa is 1 - 0.2626 = 0.7374 or approximately 0.74.

C. 0.74 is correct option.

The grades on a chemistry exam have an approximately normal distribution with a mean of 78 and a standard deviation of 5. Willa scores a 74.8 on the exam. What proportion of the students scored higher than her on the exam?

The proportion of students who scored higher than Willa on the exam can be found using the normal distribution table. Given the mean, μ = 78, and the standard deviation, σ = 5, the distribution of the scores is approximately normal.

Let's first standardize Willa's score. Standardized Score = Z-score.

The formula for Z-score is as follows:

Z = (X - μ) / σ

where, X is the raw score

μ is the mean, and

σ is the standard deviation.

Z = (74.8 - 78) / 5Z

  = -0.64

Using the standard normal distribution table, we can find the proportion of students that scored higher than Willa. The area to the left of Willa's Z-score is 0.2626.

for such more question on proportion

https://brainly.com/question/24155045

#SPJ11

The process that is necessarily driven by an increase in the entropy of the surroundings is the vaporization of water.

Entropy is a measure of the degree of disorder or randomness in a system. In a system, entropy can either remain unchanged, increase or decrease. It depends on the direction of the process. It is said that natural processes tend to go towards a state of maximum entropy or disorder. This is known as the second law of thermodynamics.

The process of vaporization of water is the process in which water changes its phase from liquid to gas, by the absorption of heat energy. In this process, the entropy of the system increases due to the production of a more random, disordered state. The entropy of the surroundings also increases. Hence, it is the process that is necessarily driven by an increase in the entropy of the surroundings.

Full task:

Which of the following processes is necessarily driven by an increase in the entropy of the surroundings?

Learn more about entropy: https://brainly.com/question/15402023

#SPJ11

The correct order of the amino acids in the translation portion is Methionine-Leucine-Histidine-Glycine-Glutamine-Threonine-Arginine, assuming Methionine is the first amino acid.

The order of amino acids in a polypeptide chain is determined by the sequence of codons in the mRNA transcript during the process of translation. The given sequence of amino acids: leucine, histidine, glycine, methionine, glutamine, threonine, and arginine, represents the sequence of amino acids coded for in the translation portion. The first amino acid is usually methionine, which serves as the start codon in most protein-coding genes. Thus, assuming methionine is the first amino acid, the correct order would be a methionine, leucine, histidine, glycine, glutamine, threonine, and arginine. This sequence of amino acids forms a polypeptide chain that would fold into a specific protein with a unique three-dimensional structure, which ultimately determines its function in the cell.

learn more about amino acids here:

https://brainly.com/question/14583479

#SPJ4

To find the volume of gaseous products formed in the given reaction, we have to balance the chemical equation and then use the balanced chemical equation to solve the question.

The balanced chemical equation of the given reaction is as follows:

CO (g) + H2O (l) → CO2 (g) + H2 (g)

Now, we need to determine the mole ratios of reactants and products:

1 mole of CO reacts with 1 mole of H2O to produce 1 mole of CO2 and 1 mole of H2.

As given, we have 119 liters of CO, we need to calculate the amount of H2O required to react with 119 liters of CO:

1 mole of CO occupies 22.4 L at STP.

Therefore, 119 L of CO contains 119/22.4 = 5.31 moles of CO.

From the balanced chemical equation, we can see that 1 mole of CO reacts with 1 mole of H2O.

Therefore, 5.31 moles of CO will react with 5.31 moles of H2O.

So, the volume of H2O required to react with 119 L of CO can be calculated as follows:

5.31 moles of H2O occupy 5.31 × 18 L = 95.58 L

Now, we have the volume of H2O required to react with 119 L of CO.

We know that, at the same temperature and pressure, the volume of the gaseous product is directly proportional to the number of moles of the gaseous product.

So, the volume of gaseous products formed in the given reaction can be calculated as follows:

1 mole of CO2 occupies 22.4 L at STP.

Therefore, 5.31 moles of CO2 will occupy 5.31 × 22.4 L = 119.2 L

1 mole of H2 occupies 22.4 L at STP.

Therefore, 5.31 moles of H2 will occupy 5.31 × 22.4 L = 119.2 L

Therefore, the total volume of gaseous products formed in the given reaction is 119.2 L. Answer: 119.2

to know more about chemical balance refer here:

https://brainly.com/question/28294176#

#SPJ11

The correct answer is (b). The following word equation best represents this reaction: sulfur + oxygen → sulfur dioxide.

Sulfur dioxide (SO2) is produced when sulfur is burned in oxygen. The chemical reaction that occurs is:

S(s) + O2(g) → SO2(g)

This equation represents the burning of sulfur to produce sulfur dioxide in the presence of oxygen. Sulfur, when burned in the presence of oxygen, produces sulfur dioxide. In this chemical reaction, sulfur (S) reacts with oxygen (O2) to form sulfur dioxide (SO2). The reaction is exothermic, which means that it releases heat.

Sulfur dioxide is a major air pollutant and has significant impacts on human health. However, it also has immense importance in laboratories. It is used for the manufacture of sulphuric acid and is also used as a preservative.

In summary, the correct option is B, which is sulfur + oxygen → sulfur dioxide.

To know more about sulfur dioxide, refer here:

https://brainly.com/question/9720549#

#SPJ11

The correct word equation that represents the production of sulfur dioxide from the burning of sulfur in the presence of oxygen is **option b**: sulfur + oxygen → sulfur dioxide.

When sulfur is burned in the presence of oxygen, it undergoes a chemical reaction known as combustion. During this process, sulfur reacts with oxygen to form sulfur dioxide. The equation can be balanced as follows:

[tex]Sulfur (S) + Oxygen (O2) → Sulfur Dioxide (SO2)[/tex]

In this equation, sulfur and oxygen are the reactants, while sulfur dioxide is the product. It is important to note that the coefficients (numbers in front of the chemical formulas) should be adjusted to balance the equation, ensuring that the number of atoms on both sides is equal.

Learn more about sulfur dioxide here:

https://brainly.com/question/31142164

#SPJ11

The number of moles of H₂ gas present in the container is 0.118 moles.

The number of moles of a gas can be calculated using the following formula:

PV = nRT

Where;

According to this question, 2.9L of H₂ at a temperature of 306K and a pressure of 1.02 atm. The number of moles can be calculated as follows:

1.02 × 2.9 = n × 0.0821 × 306

2.958 = 25.1226n

n = 2.958/25.1226

n = 0.118 moles

Learn more about moles at: https://brainly.com/question/26416088

#SPJ1

The correct matching is

a substance that donates one proton when dissolved in water -  e. monoprotic acid

a substance that donates two protons when dissolved in water -  b. diprotic acid

a substance that donates three protons when dissolved in water - d. triprotic acid

any ionic compound whose cation comes from a base and whose anion comes from an acid -  c. salt

the solution in the buret -  f. titrant

the solution in the flask - a. analyte

The term "monoprotic acid" is most appropriate for a substance that donates one proton when dissolved in water. A "diprotic acid" is a substance that donates two protons when dissolved in water. A "triprotic acid" is a substance that donates three protons when dissolved in water. Any ionic compound whose cation comes from a base and whose anion comes from an acid is called a "salt." The solution in the buret is called a "titrant." Finally, the solution in the flask is called an "analyte.

For more such questions on acid, click on:

https://brainly.com/question/25148363

#SPJ11

The solution is diluted, and its specific heat and its density to be the same as for pure water:
(a) The change in temperature recorded in this experiment is AT = -1.5°C.

(b) The heat transferred between the system and the surroundings can be calculated using the formula Q = mcAT, where m is the mass of the solution, c is its specific heat capacity, and AT is the change in temperature.

Assuming that the solution has a mass of 100 g and a specific heat capacity of 4.18 J/g-°C, then the heat transferred is 100 x 4.18 x (-1.5) = -627 J.

(c) The molar heat of the neutralization reaction can be calculated using the formula q = -Q/n, where q is the molar heat, Q is the heat transferred, and n is the number of moles of the reaction.

Since 1 mole of HCl and 1 mole of NaOH are used in the reaction, n = 1. Thus, the molar heat of the neutralization reaction is -627/1 = -627 kJ/mol.

(d) The neutralization reaction is exothermic, as it releases energy in the form of heat.

This is due to the fact that the reaction between NaOH and HCl is highly energetically favorable, with the products having a lower energy than the reactants.

to know more about specific heat refer here:

https://brainly.com/question/11297584#

#SPJ11

The statement which describes the extraction process correctly is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer." This lead to free acid formation. Thus, the correct option is C.

Researchers separated fatty acid sodium salts from glycerol by adding HCl and then extracting with hexanes. This is an acid-base extraction, which involves separating compounds based on their solubility differences. The extraction process can be explained as follows: When HCl is added to the mixture, it reacts with the fatty acid sodium salt to produce the corresponding fatty acid and sodium chloride.

The carboxylate group in the fatty acid sodium salt is protonated by HCl, making it more polar and water-soluble. As a result, the fatty acid is converted to its free acid form, which is insoluble in water but soluble in organic solvents like hexanes. Therefore, the fatty acid will move into the organic layer and can be extracted with hexanes. Thus, the correct statement that describes the extraction process is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer."

Therefore, the correct option is C.

Learn more about Extraction process here:

https://brainly.com/question/28297691

#SPJ11

The spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-.The spectator ions are those ions that are present on both sides of the chemical equation but do not participate in the reaction.

These ions do not change their oxidation state or form new compounds. Therefore, they are considered to be spectators and are excluded from the overall ionic equation. The equation for the reaction of perchloric acid with sodium hydroxide is:HClO4 + NaOH → NaClO4 + H2O. Sodium ions and chloride ions are the spectator ions in this reaction. Sodium ions (Na+) are present on both sides of the equation, and they do not participate in any chemical reaction.

They remain in the same oxidation state and do not form any new compound. Hence, Na+ ions are spectator ions in this reaction. Similarly, the chloride ions (Cl-) are also present on both sides of the equation and are not involved in any reaction. Therefore, they are also spectator ions.

In summary, the spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-. These ions are present on both sides of the equation but do not participate in any chemical reaction. They are considered spectators and are excluded from the overall ionic equation.

Know more about oxidation state here:

https://brainly.com/question/17161178

#SPJ11

Cations are smaller and anions larger than their parent atoms. ionic radius increases down a group. across a period, ionic radii generally decrease, but a large increase occurs from the last cation to the first anion.Therefore, the given statement is true.

True. Cations are smaller than their parent atoms because they have fewer electrons and therefore a smaller electron cloud. Anions are larger than their parent atoms because they have more electrons and therefore a larger electron cloud.

Ionic radius increases down a group because the additional electron is added to a larger atomic radius. Across a period, ionic radii generally decrease due to the increased nuclear charge and electrons being pulled in closer to the nucleus. However, a large increase occurs from the last cation to the first anion because the added electron is going into an empty orbital, thus increasing the size of the ion.

for such more question on cation

https://brainly.com/question/14309645

#SPJ11

If moles of fuel (butene) are combusted in air, the number of moles of oxygen gas produced is 120 moles.

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, 1 mole of butene reacts with 6 moles of oxygen gas to produce 4 moles of carbondioxide and 4 moles of water.

Based on the reaction, 1 mole of fuel reacts with 6 moles of oxygen gas.

This means that 20 moles of fuel will react with 120 moles of oxygen gas.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

There are 16 mol of carbon atoms in 4 mol of C4H8O2

The chemical formula C4H8O2 tells us that each molecule of this compound contains 4 carbon atoms, 8 hydrogen atoms, and 2 oxygen atoms. Therefore, to determine the number of carbon atoms in 4 mol of C4H8O2, we need to multiply the number of moles by the number of carbon atoms per molecule:

Number of carbon atoms = number of moles × number of carbon atoms per molecule

Number of carbon atoms = 4 mol × 4 carbon atoms per molecule

Number of carbon atoms = 16 mol

So there are 16 mol of carbon atoms in 4 mol of C4H8O2. It's important to note that the chemical formula of a compound gives us information about the ratio of atoms in the compound, which allows us to determine the number of atoms in a given amount of the compound.

To know more about the Carbon, here

https://brainly.com/question/30282405

#SPJ4

The equilibrium shift when the concentration of H2 (gas) is increased by adding more hydrogen gas to the container at constant temperature is towards the right side of the reaction equation.

Let us understand how the reaction shifts with the help of the following chemical reaction equation. N2(g) + 3H2(g) ⇌ 2NH3(g).

Adding more H2 gas to the container at constant temperature will increase the concentration of H2 gas.

The reaction will shift towards the product side (right side of the reaction equation) to balance the reaction equation.

The concentration of NH3 gas will increase, and the concentration of N2 gas and H2 gas will decrease.

The reaction quotient (Qc) is used to predict the direction of the reaction.

If Qc is greater than Kc, the reaction shifts towards the left side of the reaction equation.

If Qc is less than Kc, the reaction shifts towards the right side of the reaction equation.

.f Qc is equal to Kc, the reaction is at equilibrium state with no shift in the reaction.

For more information about equilibrium shift refer here

https://brainly.com/question/15164034?

#SPJ11

Option C is incorrect as it does not use the correct equation to calculate the half-life of a first-order reaction.

The correct answer is C. The reactant half-life of a first-order reaction is not equal to 0.693/k, as expressed in option C.

The equation for the half-life of a first-order reaction is: t1/2 = 0.693/k[A]0, where k is the rate constant and [A]0 is the initial reactant concentration.

To understand why this equation is correct, we need to understand how the half-life of a reaction is calculated. The half-life of a reaction is defined as the time taken for the concentration of a reactant to be halved.

This means that after a period of time, the concentration of the reactant will be equal to half of its initial concentration.

We can calculate this time using the equation for the reaction rate law: rate = k[A]0. By rearranging this equation and solving for t, we get t = 0.693/k[A]0.

This equation is known as the integrated rate law and is used to calculate the half-life of a first-order reaction.

Therefore, option C is incorrect as it does not use the correct equation to calculate the half-life of a first-order reaction. The correct options are A, B, and D.

Option A states that the rate law for this reaction is rate = k[A]0. Option B states that for rates of concentration changes, the equation is -2Δ[A]/t = Δ[P]/t,

where Δ[A] and Δ[P] are changes in the concentrations of the reactant and product, respectively.

Option D states that for product concentration, the equation is [P] = [A]0 - [A]0exp(-kt), which is correct.

to know more about half-life refer here:

https://brainly.com/question/24710827#

#SPJ11

notable states in the United States where gold is found include California, Alaska, Colorado, Nevada, and South Dakota.

when:(gold rushes)

   California (1848-1855)

   Colorado (1858-1861)

   Alaska (1896-1899)

   South Dakota (1874-1877)

   Georgia (1828-1849)

   Montana (1862-1864)

   Nevada (1859-1864)

   Oregon (1851-1861)

   North Carolina (1799-1848)

Glucose has a molecular weight of 180.18 g/mol, while hydrogen has an atomic weight of 1.008 g/mol. As a result, glucose has a mass-based hydrogen content of around 7.48%.

With the molecular formula C6H12O6, or six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, glucose is a simple sugar. The atomic weights of glucose's component atoms may be added to determine its molecular weight, which is 180.18 g/mol. We must ascertain the mass of the hydrogen atoms contained in one mole of glucose in order to calculate the proportion of hydrogen by mass in glucose. Twelve hydrogen atoms have a mass of 12.096 g/mol because their atomic weight is 1.008 g/mol. Hence, based on mass, glucose has a hydrogen concentration of approximately 7.48% (12.096/180.18 x 100%).

learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

An element with an electron configuration of [Ar]4s²3d¹⁰4p⁵ is Bromine(Br). The statements that are true about the element are B, C, and D.

A. The element is Bromine(Br). Bromine is a nonmetal and belongs to the family of elements called halogens, which is group 17. It is situated in period four of the periodic table. The electron configuration of Se is [Ar]4s²3d¹⁰4p⁵, which shows that it contains seven valence electrons.

Therefore, the statement "The element is Se" is incorrect.

B. Br is a halogen because it belongs to group 17, and all halogens possess a similar electron configuration, which is ns²np. Therefore, the element is a halogen and the statement is true.

C. Br has one less electron than the previous noble gas (Krypton) because Br has 35 electrons, whereas Kr has 36 electrons. So the statement "The element has one fewer electron than the following noble gas" is true.

D. The tendency of the element Br to gain one electron when it reacts with the metal to form a negatively charged ion is due to its valence electron configuration. Because Br contains seven valence electrons, it prefers to gain 1 electron and form an anion with a -1 charge. Therefore statement D is also true.

Overall, All the statements are TRUE except for statement A.

To know more about Bromine(Br), refer here:

https://brainly.com/question/29028678#

#SPJ11

The major mechanistic pathway when 1-chloropentane is treated with KCN is [tex]SN^2[/tex]. So, the correct option is d.

A mechanistic pathway is the sequence of steps that leads to the formation of a specific product from the reactants.

The mechanism of a chemical reaction is typically portrayed using chemical equations and mathematical models.

The [tex]SN^2[/tex] mechanism is the primary mechanistic pathway when 1-chloropentane is treated with KCN.

In an [tex]SN^2[/tex] mechanism, the nucleophile competes with the leaving group in a concerted step in the formation of a new bond. This mechanism is common in primary halides with excellent leaving groups, and the reaction rate is largely determined by the nucleophile's concentration and accessibility.  

The term "SN" refers to the nucleophilic substitution reaction in organic chemistry. It stands for "Substitution Nucleophilic."

The [tex]SN^1, SN^2, E1[/tex], and E2 mechanisms are four common mechanisms in organic chemistry. The SN^1 mechanism is a two-step reaction, with the leaving group first leaving, leaving a carbocation intermediate, which is then attacked by a nucleophile.

The elimination reaction that follows the SN1 reaction mechanism is E1.

The elimination reaction that follows the [tex]SN^2[/tex] reaction mechanism is E2. Therefore, the correct option is d.

Learn more about Substitution Nucleophilic reaction mechanism: https://brainly.com/question/30631335

#SPJ11

The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol. This enthalpy change is referred to as the heat of reaction, or enthalpy of reaction, and can be calculated using the enthalpy of formation of each reactant and product in the reaction.

The enthalpy of formation for carbon is given as +716 kJ/mol and for oxygen it is given as 0 kJ/mol. The enthalpy of formation for CO2 is given as -393.5 kJ/mol. Using Hess’s law, we can calculate the enthalpy of reaction using the following equation:  ΔHreaction = (ΔHformation CO2) - (ΔHformation C + ΔHformation O2)

Using the values for the enthalpies of formation for the reactants and products, the enthalpy of reaction can be calculated as follows: ΔHreaction = (-393.5) - (716 + 0) = -349 kJ/mol.This is the same enthalpy change as given in the question.

In conclusion, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol.

Know more about  enthalpy change here:

https://brainly.com/question/29556033

#SPJ11

Vinyl chloride (CH2=CHCl) is most likely the initial substance required to prepare the product after treatment with heated hydrochloric acid. A hydrochlorination procedure creates 1,2-dichloroethane as a byproduct by adding HCl across the vinyl chloride double bond.

Alkenes frequently undergo the hydrochlorination process, in which HCl is added across the double bond to produce a chloroalkane byproduct. In this instance, a vinyl chloride, which possesses a double bond between the carbon and chlorine atoms, is most likely the beginning substance. Warm HCl fractures the double bond, allowing the H and Cl atoms to add across the carbon atoms to create 1,2-dichloroethane as a byproduct. This response can be modelled as:

CH2 = CHCl + HCl ClCH2CH2Cl

All in all, this is a straightforward reaction that can be performed on a small scale in a lab or on a larger scale in industry to make 1,2-dichloroethane, which is utilised as a solvent and in the creation of vinyl chloride monomer.

learn more about hydrochloric acid here:

https://brainly.com/question/15231576

#SPJ4

The amines should be ranked in the following order, decreasing base strength Strongest base: NH3 (ammonia), (CH3)2NH (dimethylamine), and CH3NH (Methylamine) -NH,Br The weakest base.

Results for "rate the acids in decreasing acid strength" as an image.

When Cl's oxidation state in its oxyacid increases, so will the acidity of the solution. The highest level of Cl oxidation is found in HClO4, which is followed by HClO3, HClO2, and HClO.

For instance, the pH of pure sulfuric acid is a staggering -12, while that of nitric acid is 1.08 and hydrochloric acid is at 1.6. As a result, sulfuric acid is the strongest "normal" acid you will come across.

To know more about amines visit:-

https://brainly.com/question/30868298

#SPJ1