Introduction to bounded buffer The following are crucial portions for the bounded-buffer problems (also known as the: A producer updating next in while writing to a buffer slot.
Which two processes are connected to the bounded buffer issue, and what are their names?Producer-consumer problem is another name for the bounded buffer problem. The Producer-Consumer problem is used to generalize this issue. The solution to this issue is the creation of two counting semaphores, "full" and "empty," which count the number of full and empty buffers currently present.
How can processes share memory using a bounded buffer?A fixed buffer size is what is implied by the term "bounded buffer." Consumers and producers both wait for new items while the buffer is filled. The Producer and the Consumer must coordinate. The bounded-buffer problem's shared memory solution permits up to (n-1) items in the at most (n-1) items can be present at once buffer.
To know more about consumer empties visit:-
brainly.com/question/28990014
#SPJ4
You are working on a computer with a host name of nntp-9.BoutiqueHotel. What is the NETBIOS name of this computer
NetBIOS domain name: The DNS domain name is often the parent domain of the NetBIOS domain name. For instance, the NetBIOS domain name is contoso if the DNS domain name is contoso.com.
Windows 10: Where can I locate my NetBIOS name?You may verify NetBIOS and your Active Directory domain FQDN with a few straightforward command prompt commands. Information is seen when you type nbtstat -n. There will be numerous entries under Name, and one of the Group types will be NetBIOS.
How many characters may a fully qualified domain name (FQDN) have in total?The host name and fully qualified domain name (FQDN) are limited to 63 bytes per label and 255 characters per FQDN, respectively.
To know more about DNS visit:-
https://brainly.com/question/17163861
#SPJ4
To generate a surrogate key, Microsoft Access uses a(n) ____ data type.
a. identity
b. autoNumber
c. surrogate
d. sequence
A desktop computer does not have a lit link light on the back of the computer. Which of the following is the most likely reason for this
The desktop computer is not connected to a network cable, so there is no need for a link light.
What type of connection is the computer using? The type of connection a computer is using depends on the type of device that is being used to connect to the Internet. For example, if the computer is connecting to the Internet via a modem, then it is using a dial-up connection. Dial-up connections are slow, but they are still used in some rural areas where other options are not available. Alternatively, if the computer is using an Ethernet cable to access the Internet, then it is using a wired connection. Wired connections are more reliable than dial-up connections, but they require access to a physical network such as a router.Wireless connections are also popular for connecting to the Internet. Wireless connections use radio waves to transmit data, allowing users to connect without a physical connection. This can be done via a Wi-Fi router or a cellular data connection, such as 3G or 4G. Wi-Fi connections are typically faster than wired connections, but they are also more vulnerable to interference and can be difficult to set up.Finally, some computers are able to use satellite connections to access the Internet. These connections are typically slower than wired or wireless connections, but they can be used in places where other options are unavailable. Satellite connections can be expensive, however, so they are not always the best option.To learn more about desktop computer refer to:
https://brainly.com/question/28716381
#SPJ4
To change rows for which a specific condition is true, use the ____ command
a. CHANGE b. MODIFY c. UPDATE d. ALTER
Use the update command to modify any rows for which a specified condition is true. As a result, choice (c) is the appropriate response to the question.
In what command are the rows modified?The existing records in a table can be changed using the SQL UPDATE query. To only update the chosen rows rather than all the data, we can use the WHERE clause with the UPDATE query.
What command should I use to change the data in a table?ALTER is a Data Definition Language (DDL) statement and a SQL command used in Relational DBMS. ALTER can be used to modify the database's table's structure (like add, delete, drop indexes, columns, and constraints, modify the attributes of the tables in the database).
To learn more about update command visit:
brainly.com/question/15497573
#SPJ1
One method users can employ to determine what the Game Camera object 'sees' is by looking for the yellow box it draws around a scene view.
True
False
Given the fact that one method users can employ to determine what the Game Camera object 'sees' is by looking for the yellow box it draws around a scene view, this is True.
The yellow box that is drawn around a scene view is a representation of the area that the Game Camera object "sees" in the game.
How does this work?In Unity, the yellow box that is drawn around a scene view when the Game Camera object is selected is called the Camera Gizmo. It is a visual representation of the camera's view frustum, which is the 3D space that the camera can "see" in the game.
The view frustum is defined by the camera's field of view, aspect ratio, and near and far clipping planes. Objects that are within the camera's view frustum will be visible in the game, while objects outside of the view frustum will not be rendered.
By adjusting the camera's settings, such as its field of view or position, you can control what the camera "sees" in the scene and how the scene is rendered in the game.
Thus, the given statement is true.
Read more about program methods here:
https://brainly.com/question/23275071
#SPJ1
To represent relationships, ________ are added to tables.
A. locking keys
B. value keys
C. entity keys
D. normalized keys
E. foreign keys
foreign keys, Tables are enhanced with foreign keys to represent relationships.
What does "foreign key" mean?A row or columns of information in one table that relate to the distinct data values, frequently the primary key data, in another table are said to be "foreign keys." In a relational database, foreign keys link between two or more tables.
How do primary keys and foreign keys differ?A main key typically emphasizes the table's uniqueness. It guarantees that the value in that particular column is distinct. Typically, a foreign key is utilized to establish a connection among the two tables.
To know more about foreign key visit :
https://brainly.com/question/15177769
SPJ4
For this assignment, you will create a calendar program that allows the user to enter a day, month, and year in three separate variables as shown below.
Please enter a date
Day:
Month:
Year:
Then, your program should ask the user to select from a menu of choices using this formatting:
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
If a user chooses option one, the program should display how many days are in the month that they entered. If a user chooses option two, the program should display how many days have passed in the year up to the date that they entered.
Your program must include the three following functions:
leap_year: This function should take the year entered by the user as a parameter. This function should return 1 if a year is a leap year, and 0 if it is not. This information will be used by other functions. What is a Leap Year? (Links to an external site.)
number_of_days: This function should take the month and year entered by the user as parameters. This function should return how many days are in the given month. (Links to an external site.)
days_passed: This function should take the day, month, and year entered by the user as parameters. This function should calculate the number of days into the year, and return the value of number of days that have passed. The date the user entered should not be included in the count of how many days have passed.
Hints
Start by defining your variables, using comments. You will need a separate variable for day, month, and year that store numbers input from the user.
Make sure to name your three functions exactly as they are named above, and pass the parameters exactly in the order specified below:
leap_year(y)
number_of_days(m, y)
days_passed(d, m, y)
Once you have a function that calculates whether a year is a leap year, that function should be called within your number_of_days() function. February can have either 28 or 29 days, so your number_of_days() function needs to take into account whether or not it is a leap year.
Once you have a function that calculates the number of days in a given month, that function should be called within your days_passed() function. Different months have different numbers of days, so your days_passed() function needs to take into account what month of the year it is.
Sample Run 1
Please enter a date
Day: 5
Month: 5
Year: 1984
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
1
31
Sample Output 1
Please enter a date
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
31
Sample Run 2
Please enter a date
Day: 21
Month: 6
Year: 2016
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
2
172
Sample Output 2
Please enter a date
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
172
Answer:
hummm i have the same work i got a A
is this it is
Explanation:
For this assignment, you will create a calendar program that allows the user to enter a day, month, and year in three separate variables as shown below. Please enter a date Day: Month: Year: Then, your program should ask the user to select from a menu of choices using this formatting: Menu: 1) Calculate the number of days in the given month. 2) Calculate the number of days passed in the given year. If a user chooses option one, the program should display how many days are in the month that they entered. If a user chooses option two, the program should display how many days have passed in the year up to the date that they entered. Your program must include the three following functions: leap_year: This function should take the year entered by the user as a parameter. This function should return 1 if a year is a leap year, and 0 if it is not. This information will be used by other functions. What is a Leap Year? (Links to an external site.) number_of_days: This function should take the month and year entered by the user as parameters. This function should return how many days are in the given month. (Links to an external site.) days_passed: This function should take the day, month, and year entered by the user as parameters. This function should calculate the number of days into the year, and return the value of number of days that have passed. The date the user entered should not be included in the count of how many days have passed. Hints Start by defining your variables, using comments. You will need a separate variable for day, month, and year that store numbers input from the user. Make sure to name your three functions exactly as they are named above, and pass the parameters exactly in the order specified below: leap_year(y) number_of_days(m, y) days_passed(d, m, y) Once you have a function that calculates whether a year is a leap year, that function should be called within your number_of_days() function. February can have either 28 or 29 days, so your number_of_days() function needs to take into account whether or not it is a leap year. Once you have a function that calculates the number of days in a given month, that function should be called within your days_passed() function. Different months have different numbers of days, so your days_passed()
Authorized holders must meet the requirements to access ____________ in accordance with a lawful government purpose: Activity, Mission, Function, Operation, and Endeavor. Select all that apply.
Authorized holders must meet the requirements to access Operation in accordance with a lawful government purpose. An authorized person can be meant as a person approved or assigned by the employer to perform a specific type of duty or to be at a specific location at the jobsite.
The five items listed (Activity, Mission, Function, Operation, and Endeavor) are all different types of tasks or projects that the government may conduct, and access to them is restricted to authorized individuals who meet the necessary requirements. All of the five items are included in the sentence and are being referred as the things that authorized holders must meet the requirements to access, therefore all of them apply.
Learn more about Authorized here, https://brainly.com/question/30101679
#SPJ4
the security team was eventually able to write a better rule to match the sql injection technique that the attacker had used.
Input validation and parametrized queries with prepared statements are the only effective defences against SQL Injection attacks. Not just web form inputs like login forms must be sanitised by the developer.
What is SQL Injection attacks ?In computer science, SQL injection is a method of attacking data-driven systems by injecting malicious SQL statements into entry fields for execution. Although SQL injection is primarily recognised as a website attack vector, it may be used to target any kind of SQL database.Attackers can become administrators of the database server, spoof identities, alter already-existing data, cause repudiation problems like cancelling transactions or changing balances, allow full disclosure of all data on the system, destroy data or otherwise make it unavailable, and cause repudiation issues.In fields like login boxes, search boxes, or "sign up" fields, hackers input SQL commands. The goal is to access a system using intricate code sequences and divulge the data stored inside.To learn more about SQL Injection refer :
https://brainly.com/question/15685996
#SPJ4
under what circumstances would a multi-domain structure not be an ideal choice?
A multi-domain structure would not be the best option in PDC emulator master. conditions.
Can a forest contain many domains?Multiple domain trees may exist in a forest. When a new tree is created in a forest, its root is a child domain of the original root domain.
What is a domain and how can members of the domain's machines and users benefit from it?Network resources including computers, servers, and user accounts that allow for centralized management are grouped together as domains. It is possible to control which resources, including shared folders and printers, users and computers within a domain can access.
To know more about multi-domain structure visit :-
https://brainly.com/question/1133820
#SPJ4
pls help me
it's a chatbot assignment and i have been stick on it for 5 hours Png is bellow
To prevent any chatbot failure, avoid using single programming, and Create chatbot messages that adhere to the same protocol as live ch-at conversations.
What is a chatbot?A chatbot, also known as a chatterbot, is a software application that uses text or text-to-speech to conduct online conversations instead of providing direct contact with a live human agent.
A chatbot is a computer program or software that simulates human conversation or "noise" via text or voice interactions.
Therefore, Users are likely to become bored if they fail to inject any personality into the bot or program it to handle unpredictable commands.
To learn more about chatbots, visit here:
https://brainly.com/question/18804668
#SPJ1
Users report they have to select the output tray at the printer, even though the correct tray is selected in the print dialog. Which of the following should a technician perform FIRST to attempt to solve the problem
On the print server, reinstall the driver. Even when the right tray is selected in the print dialog, users claim they still need to choose the output tray at the printer.
Does a wireless printer make sense?
A wireless printer that relies on a hands-free gadget makes it simpler to operate when you're on the go. You will undoubtedly save a lot of money because there is no installation required. They operate within any household or business's budget.
What is a wireless printer's drawback?
The wireless printer's drawback is that an access point or wireless router is required. You are unable to use the wireless printer without a wireless network. However, the majority of houses and businesses already have wireless networks.
To know more about printer visit:
https://brainly.com/question/17136779
#SPJ4
Which of the following statements describe the benefits of a career in transportation, distribution, and logistics (TDL)? everfi
The statement that describes the benefits of a career in transportation, distribution, and logistics (TDL) is: It seeks to reduce logistics costs for the company and increase satisfaction for buyers.
What is a career in transportation, distribution, and logistics (TDL)?The planning, management, and transportation of people, materials, and commodities via road, pipeline, air, train, and water are the main areas of employment for the Transportation, Distribution, and Logistics Career Cluster.An expanding sector known as transportation, distribution, and logistics (TDL) links producers and other businesses with customers. To move items from one site to another securely and on schedule, a large TDL workforce is required due to the sharp development in eCommerce.In order to make sure that the product reaches the customer at the appropriate location and time while taking distribution and logistics into account, that profession assesses what is pertinent to logistics transport.Learn more about TDL refer to :
https://brainly.com/question/29275775
#SPJ4
A computer program outputs whether a capital city in Europe is north or south of another capital city in Europe. It only needs to know the latitude of the two cities – the other detail is unnecessary. This is an example of abstraction; including the necessary detail and not including the unnecessary detail.
Answer:
Yes, that is correct.
Explanation:
Abstraction is the process of focusing on the essential features of something and ignoring non-essential details. In this case, the program is only concerned with the latitude of the two cities, so it ignores all other details about the cities and only outputs whether one city is north or south of the other. This helps to simplify the program and make it more efficient by only dealing with the necessary information.
You decide to work late on a Saturday night to replace wiring in your server room. Upon arriving, you realize that a break-in has occurred and server backup tapes appear to be missing. What should you do as law enforcement officials arrive
As soon as law enforcement personnel show up, you should inform authorities that there is surveillance video on the property.
When handling a situation involving a data breach or data loss Chain of custody is defined.Definitions: A procedure that keeps track of the transfer of evidence throughout its lifespan of collection, storage, and analysis by recording each individual who handled the evidence, the day and time it was gathered or moved, and the reason for the transfer
Which Soar component automates the reaction to security incidents involving IT?What SOAR component is used to automate the response to security incidents involving IT? D. Security orchestration, automation, and response (SOAR) is a software program created to improve the effectiveness of incident response by speeding up reaction times.
To know more about law enforcement personnel visit :-
https://brainly.com/question/12570740
#SPJ4
Do while statement flowchart
The flowchart of a "do-while" loop can be described as follows:
The program starts at the Start block.The loop counter is initialized at the Initialize loop counter block.The program enters the Do block, where the loop body is executed.The program then evaluates the condition at the Condition block.If the condition is true, the program proceeds to the End block, and the loop is finished.If the condition is false, the program moves to the Increment loop counter block, where the loop counter is incremented.The program then returns to the Do block, and the next iteration of the loop begins.This process continues until the condition in the Condition block is met, at which point the program proceeds to the End block, and the loop is finished.The key characteristic of the do-while loop is that the loop body is executed at least once before the condition is checked and that the condition check happens at the end of each iteration, allowing the loop body to execute at least one time.
Read more about Do-While loop here:
https://brainly.com/question/19706610
https://brainly.com/question/23419814
The correct question is: "Write the flowchart for Do-while statement"
Write a java program to help the company cover a room with the fewest pieces of carpet needed. The carpet squares all measure an integer number of feet on each edge, and only accepts jobs for rooms with both width (W) and length (L) in integer number of feet. Obviously if a room is perfectly square, the company can finish the job with a single piece of carpet, and the maximum number of carpet squares that would ever be needed is L x W squares, each 1-foot on a side
Here is a sample Java program that calculates the minimum number of carpet squares needed to cover a room with a given width and length:
This program prompts the user to enter the width and length of the room in feet, and then calculates the minimum number of carpet squares needed to cover the floor. It does this by dividing the width and length of the room by the width and length of the carpet squares, and then rounding up to the nearest whole number. Finally, it prints the result to the console.
Note: In this program, the carpet squares are assumed to have a fixed width and length, which are represented by the variables carpetWidth and carpetLength. You will need to set these values to the appropriate dimensions for your carpet squares.
Consider the following correct implementation of the selection sort algorithm public static void selectionsort(int[] elements) for (int j = 0; j < elements.length - 1; j++) { int minIndex = 1; for (int k = 1 + 1; k < elements.length; k++) { if (elements[k] < elements[minIndex]) minIndex - k; } > if (1 minIndex) int temp = elements[i]; elements - elements[minIndex); elements[minIndex] - temp; // Line 19 The following declaration and method call appear in a method in the same class as selectionsort. int[] arr - (9, 8, 7, 6, 5): selectionsort(arr); How many times is the statement elements[minIndex] - temp: in line 19 of the method executed as a result of the call to selectionsort The following declaration and method call appear in a method in the same class as selectionsort. int arr - 19, 8, 7, 6, 5): selectionsort(arr); How many times is the statement elements[minIndex] = temp: in line 19 of the method executed as a result of the call to selectionsort? 2 3 D 4 5
In line 19 the method executed as a result of the call to selection sort is 4. Option E is correct.
[5, 10, 2, 1, 12]
iteration 1:
Line 11 is executed 2
iteration 2:
Line 11 is executed 1
iteration 3:
Line 11 is executed 1
iteration 4:
Line 11 is executed 0
Line 11 is executed a total of 2+1+1 = 4 times
Answer: 4
The access specifier public indicates that the method can be accessed by anyone static. In this case, accessing static members is not reliant on the object. This indicates that the method returns nothing or void.
To learn more about static void
https://brainly.com/question/14008300
#SPJ4
to store a date value without storing a time value, you can use the
Utilize the date data type if you only want to record a date value without a time value.
What of the following data types is used to hold full numbers?INVERT data type, The INTEGER data type can hold whole values with a precision of 9 or 10 digits that fall between -2,147,483,647 and 2,147,483,647.
Which of the following data types resembles numeric but only contains whole numbers?With or without a decimal mark, integer data types can store full values. Integer (which means whole in Latin) As integer data types, ANSI SQL specifies SMALLINT, INTEGER, and BIGINT. The size of the number that each type can store makes a distinction between them.
To know more about time value visit :-
https://brainly.com/question/28465900
#SPJ4
Which of the following is not an aggregate function that can be applied in a total row?
a. MAX
b. AVERAGE
c. COUNT
d. VLOOKUP
VLOOKUP is not a aggregation function that can be applied in a total row. Correct option is 'd' .
Aggregate functions perform calculations on a set of values and return a single value. This function ignores null values. Often used in the GROUP BY clause of SELECT statements.
All aggregate functions are deterministic. That is, aggregate functions return the same value each time they are called with a particular set of input values.
SQL does not have all as a built-in aggregate function. Average is used to find the average, MAX is used to find the maximum value and count is used to COUNT the number of values.
For further information regarding aggregate functions, click the link below:
brainly.com/question/28536009
#SPJ4
There is no aggregation function in VLOOKUP.
A single value is returned by aggregate functions after they have performed calculations on a set of values. Null values are ignored by this function. frequently used the SELECT statements' GROUP BY clause.
They are all deterministic aggregate functions. In other words, when an aggregate function is run with a specific set of input values, it always returns the same result.
All is not a built-in aggregate function in SQL. The terms average, max, and count are used to determine the average, max, the maximum value, and count, the number of values.
To know more about aggregate function, refer:
brainly.com/question/28536009
#SPJ4
which of the following consists of rules and standards that define how a database organizes data?
Answer: The rules and standards that define how a database organizes data are called the database schema. The schema specifies the structure of the database, including the names and data types of the fields in each table, as well as any relationships between tables. It provides a blueprint for how the data is stored and accessed, and it helps to ensure the integrity and consistency of the data within the database. The schema is typically defined using a specialized language or tool, and it can be modified as needed to reflect changes in the data or the needs of the users.
You are working on a project that requires virtualizing an operating system (OS) for an end user to test an application. It has been requested that you use a type-2 hypervisor to accomplish this. Which of the below would fulfill that requirement
You are need to carry out this task using a type-2 hypervisor. You are engaged in a project that calls for virtualizing the kvm operating system.
What hardware is KVM?
A KVM switch is a piece of hardware that enables a user to operate several computers from one or more sets of keyboards, video displays, and mice. KVM is an acronym for "keyboard, video, and mouse."
Why is a KVM required?
In conclusion, a KVM is a device that enables rapid and simple switching between many PCs or servers from a single console (keyboard, monitor, and mouse configuration) for improved administration, cost- and space-saving, and increased efficiency. A KVM switch is frequently helpful in the following situations: Home Office. Small
To know more about KVM visit:
https://brainly.com/question/13439312
#SPJ4
You have configured a wireless access point to create a small network. For security, you have disabled SSID broadcast. From a client computer, you try to browse to find the access point. You see some other wireless networks in the area, but cannot see your network. What should you do
Create a profile on the wireless client and try to browse from a client computer to the access point. You notice a few additional wireless networks.
How do you set up a wireless access point so that a wireless client can connect to it?You can use a serial cable to connect a laptop or PC to the wireless access point's console port in order to configure the access point for your client. You can see access point setup panels using terminal software and modify particular settings, including radio channel and transmit power.
Which of the above items can be turned off to assist block access to a wireless network?Utilizing MAC address filtering, turning down DHCP, and deactivating SSID broadcast all aid in limiting illegal access to wireless networks.
To know more about SSID broadcast visit:-
https://brainly.com/question/13191413
#SPJ4
With the _______________________________ as a Service model, the cloud provider owns and manages all levels of the computing environment.
The largest segment of the cloud market is cloud application services, or Software as a Service (SaaS), and it is still expanding swiftly. Applications that are managed by a third-party provider are delivered via the web using SaaS.
What does cloud computing's SaaS, PaaS, and IaaS mean?Infrastructure-as-a-service (IaaS), platform-as-a-service (PaaS), and software-as-a-service are the three primary categories of cloud computing as-a-service alternatives, and each one offers a different level of management for you (SaaS).
What does cloud computing PaaS mean?Platform as a Service (PaaS) is a full-featured cloud environment that has all the servers, operating systems, networking, storage, middleware, tools, and other components that developers need to create, run, and maintain applications.
To know more about SaaS visit:-
https://brainly.com/question/11973901
#SPJ4
Which groups on her desktop system could you make her user account a member of to enable this configuration
Remote Desktop Users groups on her desktop system could you make her user account a member of to enable this configuration.
What exactly is the Remote Desktop Users Group?The administrators' group's members are the only ones who can access remote desktops on Liquid Web's Windows servers by default. The Remote Desktop Users group, on the other hand, allows its members to safely connect to the server via RDP (Remote Desktop Protocol).
Is RDP preferable to VPN?The primary distinction between VPNs and RDP is that an RDP gives your device more capabilities, whilst a VPN doesn't. Even though you're still using the same old device, it now has a new IP address and is far more safe when accessing the Internet.
To know more about Remote Dekstop User visit
brainly.com/question/26605428
#SPJ4
class HashTable(): def __init__(self,nbuckets): pass def __len__(self): pass def __setitem__(self, key, value): pass
To determine the length of the instance attributes, utilize the magic method __len__. Now, the len(s) method internally calls the special method __len__() to return an object's length.
What does Excel properly?Capitalizes the initial letter of a text string and any additional letters that come after any character other than a letter in the text. lowercase letters are used for all other letters.
Is the constructor _ init ?Python classes have a reserved method called "__init__". In OOP principles, it is referred to as a constructor. When an object derived from the class is created, this method is called, enabling the class to initialize the attributes of the class.
To know more about Python visit:-
https://brainly.com/question/18502436
#SPJ4
To move a PivotChart to a new sheet, use the _____ ______ button in the Actions group on the Pivot Chart Tools Analyze tab
Use the Field List to reorder the fields in your PivotTable (pivot table), and when it vanishes, reveal the Field List once more.
What does Excel's move Chart command do?Click Move Chart under Chart Tools on the Design tab's Location group. Choose one of these: Click New sheet, then type a name for the worksheet in the New sheet box to move the chart to a new worksheet.
PivotTable toolbar button: what does it do?You may filter and organize data using the icon buttons on the PivotTable toolbar. reveals the PivotTable Settings dialog box, which offers options for the layout, format, totals, filers, display, and data. each field's data on a sheet is sorted.
To know more about PivotChart visit:-
brainly.com/question/29833710
#SPJ4
A directory includes the files a.py, b.py, and c.txt. Which command will copy the two files ending in .py to the /tmp/ directory?
A. cp !!.py /tmp/
B. cp *.py /tmp/
C. cp. \.py /tmp/
D. cp #.py /tmp/
E. cp $?.py /tmp/
The command that will copy the two files ending in .py to the /tmp/ directory is B. cp *.py /tmp/. The command cp !!.py /tmp/ uses the !! history substitution, it means that it will copy the last command which is not in this case the files that ends with .py, it could be any command.
The command cp. \.py /tmp/ it's not a valid command because cp. is not a valid option and \.py is not a valid file extension, it will return an error. the command cp #.py /tmp/ doesn't copy the files that ends with .py because # is used to reference the command number in history not the files, it will return an error. The command cp $?.py /tmp/ doesn't copy the files that ends with .py because $? is used to reference the exit status of the last command, it will return an error.
Learn more about code, here https://brainly.com/question/30087302
#SPJ4
how does data help with poverty?
Answer: Data can help with poverty in a number of ways. For example, data can be used to identify patterns and trends related to poverty, which can inform policy decisions and help policymakers target resources more effectively. Data can also be used to evaluate the effectiveness of poverty reduction programs, allowing governments and organizations to make adjustments and improvements as needed. Additionally, data can be used to better understand the factors that contribute to poverty and design interventions to address those root causes.
You are seeing streaks of toner across your papers when you are printing things using your office's laser printer. What is the MOST likely cause of this problem
It's usually a sign of a filthy transfer roller if you notice toner streaks on your printouts. As a result, routinely cleaning the transfer roller will keep your printed documents spotless.
What brings about toner streaks?Toner can pour out of a broken cartridge, or it can cause streaky prints. It is necessary to change your toner cartridge if any of its photoconductor's (the part with the green or blue roller) parts are visibly harmed.
Why are there streaks on my laser printer's prints?The most common causes of streaking are a used-up toner cartridge or a worn-out drum unit. Drum units are consumables that only require replacement after using three or four toner cartridges. Toner and drum units are not always used separately by printers.
To know more about laser printer visit:-
https://brainly.com/question/14783882
#SPJ4