The given statement is true. The rate limiting step in a reaction is the slowest step in the reaction sequence.
In chemical kinetics, the slowest step, sometimes referred to as the rate-determining step or rate-limiting step, frequently roughly determines the total pace of a reaction.
The reaction's slowest step is used to generate the rate equation. Writing rate equals the rate constant of the slowest step times the concentrations of the reactant or reactants raised to their reaction order is how you build up a rate equation.
2A + B → C + D using the following two stages, the first step is referred to as the rate-determining step of the reaction since the total rate of the reaction is equal to the rate of the slow first step. The rate of the reaction in the aforementioned equation depends on the rate constant k.
Learn more about rate limiting step here brainly.com/question/14923179
#SPJ4
You need 65.0 grams of copper for an experiment. How many atoms of copper is this?
You need 65.0 grams of copper for an experiment. There would be 6.16 x 10 ²³ atoms of copper
First we should calculate the moles of copper
Moles cooper = mass/ mass molar
Moles cooper = 65.0 grams / 63.5 g. mol
Moles cooper = 1. 023 moles
The number of atoms in 1 mole of any substance is 6.022 × 10²³ atoms. The Avogadro's number is a common name for this number (NA). It shows how many atoms and molecules make up a mole of a substance.
Quantities that cannot be measured in terms of grams or milligrams are also referred to as moles. A mole is hence the quantity of atoms, ions, or molecules.
The number of atom copper = moles x avogadro's number
The number of atom copper = 1. 023 moles x 6.022 × 10²³ = 6.16 x 10 ²³
Learn more about atoms and molecules here:
brainly.com/question/7013021
#SPJ4
2. How many liters of sulphur trioxide are formed when 4800 cm³ of sulphurdioxide is burned in air? what is the volume
4.8L of sulphur trioxide are formed when 4800 cm³ of sulphur dioxide is burned in air. Sulfur trioxide may be found in three different forms.
What is sulphur trioxide?The chemical compound with both the formula SO[tex]_3[/tex] is sulfur trioxide. It has been regarded as "unquestionably the much more commercially significant" sulfur oxide. It is manufactured on a large level as a precursor towards sulfuric acid.
Sulfur trioxide may be found in three different forms: gaseous monomer, crystalline trimer, as well as solid polymer. At little below room temperature, sulfur trioxide is indeed a solid with a rather limited liquid range. The major precursor of acid rain is gaseous SO[tex]_3[/tex].
2SO[tex]_2[/tex] + O[tex]_2[/tex] [tex]\rightarrow[/tex] 2SO[tex]_3[/tex]
SO[tex]_2[/tex] is the limiting reactant
Molar ratio between SO[tex]_2[/tex] and SO[tex]_3[/tex] which is 2:2.
1000cm³= 1L
4800cm³×1L/1000cm³= 4.8L
Therefore, 4.8L is the volume.
To know more about sulphur trioxide, here:
https://brainly.com/question/24142291
#SPJ9
an nacl solution is prepared by dissolving 50.0 g nacl in 200.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?
The vapor pressure of the NaCl solution is 22.66 torr.
What is Vapor Pressure?
It is the result of molecules escaping from the surface of a liquid or solid and entering the gas phase. The vapor pressure is dependent on the temperature and the intermolecular forces between the molecules. As the temperature increases, the vapor pressure of a substance increases as well.
To calculate the vapor pressure of the NaCl solution, we can use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution:
P = X_solvent * P°_solvent
where P is the vapor pressure of the solution, X_solvent is the mole fraction of the solvent (water), and P°_solvent is the vapor pressure of pure water.
First, we need to calculate the mole fraction of water in the solution:
moles of water = mass of water / molar mass of water
moles of NaCl = mass of NaCl / molar mass of NaCl
moles of water = 150.0 g / 18.015 g/mol = 8.326 mol
moles of NaCl = 20.0 g / 58.44 g/mol = 0.342 mol
total moles = moles of water + moles of NaCl = 8.326 mol + 0.342 mol = 8.668 mol
X_water = moles of water / total moles = 8.326 mol / 8.668 mol = 0.962
Next, we can use Raoult's law to calculate the vapor pressure of the solution:
P = X_water * P°_water
P = 0.962 * 23.56 torr = 22.66 torr
Therefore, the vapor pressure of the NaCl solution is 22.66 torr.
when considering precise mass, which particle has the greatest mass?
When considering the precise mass, the particle has the greatest mass is the neutrons.
The Neutron is the heaviest among all the subatomic particles with the mass of the 1.0087 amu, and the proton has the mass of the 1.0073 amu. The Positron and the electron both have the mass of the 0.00055 amu.
The difference in between the mass of the neutron and the proton is very small. This is the reason that they are both have the relative mass of the one atomic mass unit. The mass of the neutron in the grams is the 1.674 × 10⁻²⁴ grams.
To learn more about mass here
https://brainly.com/question/28907859
#SPJ4
Why Is Water the Universal Solvent?
Generally, water is known as the universal solvent as it dissolves more chemicals than any other known solvent.
Basically at the molecular level, salt basically dissolves in water due to electrical charges and due to the fact that both water and salt are the compounds which are polar, and with positive and negative charges on opposite sides in the molecule. This property of water allows the water molecule to become attracted to many other different types of molecules.
It is true that universal solvent does not exist. Water is basically known as the universal solvent because it dissolves more chemicals than any other solvent. However, water is the solvent that only dissolves with other polar molecules.
Learn more about universal solvent from the link given below.
https://brainly.com/question/1834245
#SPJ4
how does the collision model explain the effect of concentration on the reaction rate
The collision model explains that in order for a reaction to occur, reacting molecules must collide with sufficient energy and proper orientation.
The probability of a successful collision increases with the number of collisions, which in turn is dependent on the concentration of the reactants. As the concentration of the reactants increases, the number of collisions per unit of time also increases, leading to an increase in the rate of reaction.
This is because there are more molecules available to collide, resulting in a higher frequency of successful collisions. Thus, increasing the concentration of reactants leads to an increase in the rate of reaction, according to the collision model.
To learn more about rate of reaction refer to:
brainly.com/question/30546888
#SPJ4
Does like dissolve like in solubility?
"like dissolves like" in solubility because substances with similar intermolecular forces will dissolve in each other.
Yes, "like dissolves like" is a general rule in solubility. This means that substances with similar intermolecular forces will dissolve in each other. For example, polar substances will dissolve in polar solvents, and nonpolar substances will dissolve in nonpolar solvents.
Here is an example of how "like dissolves like" works in solubility:
1. Consider the polar substance table salt (NaCl) and the polar solvent water (H2O).
2. When table salt is added to water, the positive sodium ions (Na+) are attracted to the negative ends of the water molecules, and the negative chloride ions (Cl-) are attracted to the positive ends of the water molecules.
3. This attraction between the ions and the water molecules causes the salt to dissolve in the water.
In contrast, if a nonpolar substance like oil is added to water, it will not dissolve because the intermolecular forces between the oil and water molecules are not strong enough to overcome the forces holding the oil molecules together.
To learn more about solubility refer here:
https://brainly.com/question/28170449#
#SPJ11
what is the relationship between the following two molecules?
OH OH Not yet answered Marked out of 1.00 Hw Cl H3C CH3 Flag a. Constitutional isomers b. Conformational isomers c. Diasteriomers d. Enantiomers None of these
The two molecules shown are constitutional isomers, as they have the same molecular formula (C3H7Cl) but different structural arrangements of the atoms.
Constitutional isomers differ from conformational isomers, diastereomers, and enantiomers in that they have different arrangements of atoms in their structures.
Conformational isomers have the same arrangement of atoms, but differ in the 3D shape of the molecule; diastereomers have different chiral centers and hence different configurations; and enantiomers are mirror images of each other.
Learn more about molecules :
https://brainly.com/question/475709
#SPJ4
Which group has the lowest ionization energy value?
Answer: The alkali metals.
Explanation:
DNA has equal number of adenine and thymine residues (A=T) and equal number of guanine and cytosine (G=C). These relationships are known asa. Chargaff's ruleb. Coulomb's lawc. Le-Chatelier's Principled. Van't Hoff plot
Chargaff's criteria, DNA from all cells of all creatures should include a 1 : 1 ratio of pyrimidine and purine bases.
What is meant by Chargaff's rules?According to Chargaff's criteria, DNA from all cells of all creatures should include a 1 : 1 ratio of pyrimidine and purine bases. More specifically, the amounts of guanine and adenine should be identical to each other in terms of their proportions to cytosine and thymine, respectively.
A and T and G and C bases in DNA are always equal in amount, according to this rule. (Adenine, Thymine, Guanine, and Cytosine make up the nucleotide triphosphates.) Erwin Chargaff (1905–2002), a renowned Austrian–American scientist who worked at Columbia University, is honored by having this rule bear his name.
The Chargaff's Rule was established by Erwin Chargaff and serves to illustrate the nitrogenous component of the DNA double helix. The DNA of every organism has an equal number of purines and pyrimidines, or a 1 : 1 ratio, according to this statement.
Therefore, the correct answer is option a. Chargaff's rule.
The complete question is:
DNA has equal number of adenine and thymine residues (A=T) and equal number of guanine and cytosine (G=C). These relationships are known as
a. Chargaff's rule
b. Coulomb's law
c. Le-Chatelier's Principle
d. Van't Hoff plot
To learn more about Chargaff's rules refer to:
https://brainly.com/question/20804844
#SPJ4
You have 500. Ml of a solution containing 0. 20 m acetic acid (ch3cooh) and 0. 30 m sodium acetate (ch3coona). What will be the ph of the solution that results after the addition of 20. 0 ml of 1. 00 m naoh(aq)?.
The pH of the solution after adding 20.0 mL of 1.00 M NaOH will be 9.24.
The pH of a solution containing a weak acid and its salt will be affected by the addition of a strong base, such as NaOH. The initial solution contains acetic acid, a weak acid, and sodium acetate, its conjugate base.
To simplify the answer:
The addition of 20.0 mL of 1.00 M NaOH to a solution containing acetic acid and its conjugate base will result in a decrease in pH.The pH of the solution after the addition of NaOH will be 9.24.The addition of NaOH will consume some of the acetate ions, converting them back into acetic acid and increasing the concentration of hydrogen ions in the solution. This will result in a decrease in pH. To calculate the pH after the addition of NaOH, we can use the concept of an acid-base buffer.
Learn more about Acetic acid:
https://brainly.com/question/15231908
#SPJ4
an nacl solution is prepared by dissolving 50.0 g nacl in 200.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?A. 1.574 torrB. 1.686 torrC. 20.41 torrD. 0.8764 torrE. 21.87 torr
Therefore, the vapor pressure of the solution is approximately 20.80 torr, which is closest to option C: 20.41 torr.
To calculate the vapor pressure of the solution, we can use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution.
The mole fraction of water can be calculated as follows:
moles of water / (moles of water + moles of NaCl)
= (200.0 g / 18.015 g/mol) / [(200.0 g / 18.015 g/mol) + (50.0 g / 58.44 g/mol)]
= 0.883
Raoult's law states that the solution's vapour pressure is:
Water mole fraction * water vapour pressure
= 23.56 torr * 0.883
= 20.79928 torr.
Learn more about vapor pressure here:
https://brainly.com/question/11864750
#SPJ4
need help to fill im chart
The following is in the order of: Element / Group / Ion Name / Ion Formula
Lithium / Alkali Metals / Lithium Ion / Li⁺Aluminum / Boron Group (Group 13) / Aluminum ion / Al³⁺Fluorine / Halogens / Fluoride Ion / F⁻Strontium / Alkaline Earth Metals / Strontium Ion / Sr²⁺Oxygen / Chalcogens (Group 16) / Oxide Ion / O²⁻Boron / Boron Group (Group 13) / Boron Ion / B³⁺Nitrogen / Nitrogen Group (Group 15) / Nitride Ion / N³⁻ Sulfur / Chalcogens (Group 16) / Sulfide Ion / S²⁻Potassium / Alkali Metals / Potassium Ion / K⁺Iodine / Halogens / Iodide Ion / I⁻What is the common name for 2,3-dimethylbutane?
The common name for 2,3-dimethylbutane is diisopropyl.
In the IUPAC nomenclature system, the name 2,3-dimethylbutane indicates that there are two methyl groups (-CH₃) attached to the second and third carbon atoms of the butane chain.
However, in common naming, the two methyl groups are referred to as isopropyl groups, giving the compound the name diisopropyl. It is an organic compound with the chemical formula C₆H₁ and is an isomer of hexane.
It is important to note that there are other isomers of hexane with different common names, such as 2-methylpentane (isohexane) and 3-methylpentane (neo-hexane).
To know more about diisopropyl here:
https://brainly.com/question/24301056#
#SPJ11
What are the genetic forms of hypertriglyceridemia?
There are several genetic forms of hypertriglyceridemia, including:
What is hypertriglyceridemia?
Hypertriglyceridemia is a medical condition characterized by high levels of triglycerides in the blood. Triglycerides are a type of fat found in the blood that provides energy to the body. Elevated levels of triglycerides are a risk factor for cardiovascular disease and pancreatitis.
Familial combined hyperlipidemia (FCHL): This is a genetic disorder that affects the way the body processes cholesterol and triglycerides. It is characterized by high levels of both LDL (low-density lipoprotein) and triglycerides.Familial hypertriglyceridemia (FHTG): This is a genetic disorder that is caused by mutations in genes that regulate the production and breakdown of triglycerides. It is characterized by high levels of triglycerides in the blood.Familial lipoprotein lipase deficiency (FLPLD): This is a rare genetic disorder that affects the body's ability to break down and clear triglycerides from the blood. It is caused by mutations in the LPL gene and is characterized by very high levels of triglycerides in the blood.Apolipoprotein C-II deficiency (APOC2): This is a rare genetic disorder that is caused by mutations in the APOC2 gene. It results in a deficiency of apolipoprotein C-II, which is necessary for the breakdown of triglycerides in the blood. This leads to very high levels of triglycerides in the blood.Monogenic familial hypertriglyceridemia: This is a rare genetic disorder that is caused by mutations in genes that regulate the production and breakdown of triglycerides. It is characterized by high levels of triglycerides in the blood.To learn more about Hypertriglyceridemia:
https://brainly.com/question/25435720
#SPJ4
A solution is prepared by dissolving 23. 7 g of cacl2 in 375 g of water. The density of the resulting solution is 1. 05 g/ml. The concentration of cl- in this solution is ________ m.
The concentration of chloride ions in the solution is 0.012 mM.
To determine the concentration of chloride ions (Cl-) in the solution, we need to first calculate the number of moles of calcium chloride (CaCl2) that were dissolved in the solution. We can use the formula weight of calcium chloride, which is 110.98 g/mol:
=> 23.7 g CaCl2 / 110.98 g/mol
=> 0.214 moles CaCl2
Next, we need to determine the number of moles of chloride ions produced when the calcium chloride dissolves. Since calcium chloride is an ionic compound, it dissociates into its constituent ions when dissolved in water. For every mole of calcium chloride that dissolves, one mole of calcium ions (Ca2+) and two moles of chloride ions (Cl-) are produced.
So, the number of moles of chloride ions produced is twice the number of moles of calcium chloride that were dissolved:
0.214 moles CaCl2 * 2 moles Cl- / 1 mole CaCl2
=> 0.428 moles Cl-
Finally, to determine the concentration of chloride ions in the solution, we need to divide the number of moles of chloride ions by the volume of the solution. The volume of the solution can be calculated from its mass and density:
=> 375 g solution / 1.05 g/mL
=> 358.33 mL
Now we can calculate the concentration of chloride ions in moles per milliliter (mM):
=> 0.428 moles Cl- / 358.33 mL
=> 0.012 mM Cl-
To learn more about Concentration :
https://brainly.com/question/13764840
#SPJ4
The 1h nmr spectrum of a particular compound contains 5 signals. this means that the compound _____.
The 1h nmr spectrum of a particular compound contains 5 signals, this means that the compound contains five unique sets of chemically nonequivalent hydrogen atoms.
In proton nuclear magnetic resonance (1H NMR) spectroscopy, each signal in the spectrum corresponds to a set of chemically nonequivalent protons, which have slightly different chemical environments and therefore different resonance frequencies.
If the 1H NMR spectrum of a compound contains 5 signals, it means that there are 5 sets of chemically nonequivalent protons in the compound, which can arise from different types of functional groups or different positions of protons within the same functional group.
The number of signals in the 1H NMR spectrum can provide valuable information about the molecular structure and can be used to determine the identity of the compound.
To know more about spectrum here
https://brainly.com/question/28260199
#SPJ4
what are the 4 parts of natural selection? please keep it short and simple
Answer:
Variation, Inheritance, Selection, Time and adaptation.
Explanation:
Variation : Some variation occur in the off spring in appearance and behavior.
Inheritance : These variation are consistently passed on from parent to offspring of next generation to become genetic trait of the species.
Selection : Differential survival and reproduction of these species.
Time and adaptation : These variations/ traits become common in the population. The result is a population that is better suited--better adapted--to some aspect of the environment than it was before.
Example : Legs once used for walking are modified for use as wings or flippers. Scales used for protection change colors to serve as camouflage.
Hope it helps..
if an unknown compound has a moderately intense, wide peak in the 3200-3400 cmâ1 region, what functional group is likely present? a) carboxylic acid b) alcohol c) alkane d) ketone e) ester
If an unknown compound has a moderately intense, wide peak in the 3200-3400 cm-1 region, then alcohol functional group is likely present.
What is a compound?
A compound is created when two or more components join chemically in a predetermined mass ratio. A compound is a substance made up of two or more different types of elements together in a specific proportion of their atoms. Some of the particular qualities of the constituent parts are lost during fusion, while the newly created molecule acquires new characteristics.
Chemical Formula: The chemical formula identifies a compound. The ratios of atoms that make up a certain chemical molecule are symbolically represented in a chemical formula.
To learn more about compound visit;
https://brainly.com/question/14117795
#SPJ4
why would you expect a 1.5 m cacl2 solution to have a lower freezing point than a 1.5 m nacl solution?
a. CaCl, has more particles when dissolved b. NaCl has more particles when dissolved
c. CaCl2 is warmer than NaCl d. It won't. They should have the same freezing point
CaCl, has more particles when dissolved expect a 1.5 m cacl2 solution to have a lower freezing point than a 1.5 m nacl solution.
What does dissolve means?
Dissolve is a term used to describe a process in which a solid substance is broken down into a liquid form. This is done by adding a solvent, such as water, to the solid and allowing it to mix with the solid until the solid is completely broken down into a liquid form. Dissolving is a common process used in chemistry, medicine, and food preparation.
Depression of freezing point is a colligative property. That means it depends upon the no. of particles of the solute in the solvent. The greater no. of ions in the Solution, lower is the freezing point depression.
In CaCl2 → ca2+ + 2cl Total 3 ions present in a molecule, but in NaCl → Na+ + cl total 2 ions present. 50 for CaCl2 the depression of freezing point is lower than NaCl.
Therefore, CaCl, has more particles when dissolved is the correct answer.
To learn more about dissolve from the link
https://brainly.com/question/2364287
#SPJ4
a ground-state atom of which element has one electron in its fourth and outermost main energy level?a. Kb. Nac. Bd. Ga
A ground state atom of the element that has the one electron in its fourth and the outermost main energy level is the correct option is a. K.
The atomic number of the element potassium ,K is 19. The potassium atom has the 19 protons and the 19 electrons. There are 2 electrons on the potassium atom first energy level, the 8 electrons on the potassium atom second level, the 8 electrons on the potassium atom third energy level, and 1 on the potassium fourth energy level.
Thus, the fourth energy level of the element potassium has the only 1 electron.
To learn more about energy level here
https://brainly.com/question/19819922
#SPJ4
What causes one object to change the motion of another object?
Answer:
The speed and direction of motion can be changed by applying force on an object and thus a force can bring a change in the state of motion of an object.
The temperature of water at the bottom of the deep ocean near the equator is likely to be closest to
12 Celsius
19 Celsius
50 Celsius
2 Celsius
Answer:
Four folk love legends: "Cowhand and Weaver Girl", "Meng Jiangnu crying at the Great Wall" (cry Wan Xiliang), "Liang Shanbo and Zhu Yingtai", "The Legend of the White Snake", the author does not know
The development history of the Four ancient Chinese folk legends: China is a country with a vast territory and abundant resources and a long history, which contains extremely rich national cultural heritage. Among them, the four most Chinese ones are the famous "Cowhand and Weaver Girl", "Meng Jiangnu", "Liang Shanbo and Zhu Yingtai" and "The Legend of the White Snake". The most widespread, the most influential.
Brief introduction: the gigolo knit legend began in the book of songs, cable ":" Qi he vega ", "Huan he cow". "Nineteen Ancient Poems · Long Distance Star" has called the cowherd and weaver girl husband and wife. Ying Shao "custom" Yi wen: "Zhinv Tanabata when crossing the river, make magpie bridge, legend has it that the magpie head without reason all Kun, because beam (note: bridge) to cross Zhinv also. The story has been preliminarily formed and combined with the Qixi Festival custom.
The legend of Meng Jiangnu originated from the record of Qi Liang's wife refusing to hang herself in the area of the Marquis of Qi and adhering to the rules of etiquette in the Zhuan. Later, it was added in the Dangong that "Duke Zhuang of Qi attacked Ju and took away (tunnel) and Qi Liang died. The weeping wife who greeted his coffin on the road is the archetype of the story. Han Liu Xiang's Biography of Liannu (IV) : "Qi Liangzhu died in battle, his wife cried in the city, ten days the city collapsed." And Tang (anonymous) "carved jade collection" record "Qin when Yan Qi Liang, married Meng Chao female Zhongzi wife, because good was built the Great Wall officials killed, Zhongzi cry under the Great Wall, the city collapsed. It is known that this legend was popular in the Tang Dynasty, but Meng Zhongzi and Qiliang were renamed Meng Jiangnv and Fan Xiliang in the legend. The story of Butterfly lovers first appeared in Tang's "Ten Taoist and Four Tibetan Records", which recorded the story of Liang and Zhu "having a taste of schoolmates" and "sharing the tomb". There are more detailed records in Xuanbaozhi of late Tang Zhang Reading. To the Ming Dynasty Feng Menglong's "Ancient and modern novels", and added to the British Taiwan confused belt, Liang Shanbo doubts and butterflies.
The story of White Snake came into being the latest. The origin of the story is as follows. It originates from the Three Towers of West Lake. To the Ming Dynasty Feng Menglong's "Lady White Forever Town Leifeng Pagoda" (" Warning Word "), the story has been preliminarily finalized.
Which shows the correct Lewis
structure of AsH?
The Lewis structure is shown by option A
What is the Lewis structure?The Lewis structure, also known as a Lewis dot diagram, is a type of structural formula that represents the valence electrons of an atom in a molecule. It is named after Gilbert N. Lewis, who developed the concept in 1916.
In a Lewis structure, the symbol of an element represents the nucleus and inner electrons of the atom, while dots or crosses surrounding the symbol represent the valence electrons. The valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions. By drawing Lewis structures, one can determine the number of bonds that an atom can form, and predict the molecular geometry of a molecule.
We can see that arsenic is in group 15 hence it would have one lone pair and three bo0nd pairs as shown
Learn more about Lewis structure:https://brainly.com/question/20300458
#SPJ1
Answer:A
Explanation: Got it right
What is the correct name for Dioxygen difluoride?
The correct name for the Dioxygen difluoride is the Fluorine dioxide. The chemical formula is O₂F₂.
The Fluorine dioxide is the compound of the fluorine and the oxygen with the molecular formula of the O₂F₂. It can exist as the orange colored solid which will melts into the red liquid at the temperature of the −163 °C.
The oxides of the fluorine is highly toxic by the inhalation. The Corrosive to the skin and the eyes. It Can also explode on the contact with the water. It will decomposes to the toxic gaseous fluorine if it will heated to the high temperature.
To learn more about fluorine here
https://brainly.com/question/1940697
#SPJ4
Chemistry help needed !!
At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
What is pentane?Pentane is an organic compound with the formula C₅H₁₂ - that is, an alkane with five carbon atoms.
Given is to understand why the temperature increase at the of the experiment.
At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
Therefore, at the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
To solve more questions on electrostatic energy scaling, visit the link-
brainly.com/question/29014197
#SPJ1
What is IR correlation table?
An IR correlation table is a reference table used in the analysis of infrared spectra to identify functional groups present in a sample.
Infrared (IR) spectroscopy is a widely used technique in chemistry to identify the presence of functional groups in a sample. An IR correlation table is a reference table that lists the common absorption frequencies of different functional groups in the IR spectra.
The table is used to correlate the observed absorption peaks with the corresponding functional groups in the sample. This is important in the identification and characterization of unknown compounds in various fields such as organic chemistry, biochemistry, and material science.
To know more about the correlation, here
brainly.com/question/30116167
#SPJ4
What is the molar mass of lead and its atomic number?
The molar mass of lead, Pb atom is equals to 207.02 g/mol. The atomic number of lead in periodic table is 82.
A pure substance known as an element exists in discrete units known as atoms. It is known that an atom is composed of subatomic particles. The identity of an atom depends on the number of protons present in its nucleus. We know that molar mass is defined as the mass of substance in grams divided by moles of substance, that is grams per mole. In the case of atoms, the atomic mass with units is called the atomic mass unit We have lead, an atom of Pb. Now, scanning the periodic table, we find that Lead, labeled Pb, has an atomic number of 82. The atomic mass of lead is 207.2u or molar mass is 207.2 grams per mole.
For more information about periodic table, visit :
https://brainly.com/question/25916838
#SPJ4
What material, when dry, tends to form the largest angle of repose?
Angular gravel when dry, tends to form the largest angle of repose.
A type of building material known as crushed stone or angular rock is created by mining a suitable rock deposit and using crushers to reduce the extracted rock to the required size.
The steepest angle of fall or dip in relation to the horizontal plane to which a granular material can be piled without collapsing is known as the angle of repose, or critical angle of repose. The material on the slope face is almost ready to slide at this angle. Angles of repose can be between 0° and 90°.
Learn more about angle of repose here brainly.com/question/23683999
#SPJ4
Assume that c is a variable that has been assigned a string value. Write an expression whose value is true if and only if c is a space character.
The expression whose value is true if and only if c is a space character is c.isspace().
In Python, you can use the isspace() method to check if a character is a space character. Here is an expression that will return True if the variable c contains a space character, and False otherwise:
c.isspace()
This expression will evaluate to True if c is a space character, including regular spaces, tabs, and other whitespace characters. If c is not a space character, the expression will evaluate to False.
isspace() is a method in Python that can be called on a string object. The method returns True if all characters in the string are whitespace characters, and False otherwise.
Learn more about c.isspace here:
https://brainly.com/question/16177828
#SPJ4