two bodies of mass 8 kg and 4 kg move with velocities 11 meter per second and seven meter per second respectively if they Collide and stick together their speed after Collision is initially they move in opposite direction​

In order for the refrigerator not to tip over, the maximum acceleration of  1.86 m/s² must not be exceeded.

The term acceleration has to do with the rate at which velocity changes with time.

We have to take the moments at the tipping point of rotation as follows;

Clockwise moment = Anticlockwise moment

Hence;

F₂ * 1.58 m = F₁ * 0.67 m

The weight at half the width= 30 cm or 0.3 m

Height of refrigerator = 158 cm 0r 1.58 cm

Then;

m * a * 1.58 = m * 9.81 * 0.30

a = 1.86 m/s²

In order for the refrigerator not to tip over, the maximum acceleration of  1.86 m/s² must not be exceeded.

Learn more about acceleration: brainly.com/question/14344386

#SPJ1

Answer:

In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.

Explanation:

(a) The work done in moving the crate along the floor is 7,050 J.

(b) The work done in moving the crate vertically is 0 J.

W = Fdcosθ

where;

W = (1100 + 310) x 5

W = 7,050 J

W  = Fd cos(90)

W = 0

Thus, the work done in moving the crate along the floor is 7,050 J.

the work done in moving the crate vertically is 0 J.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

Answer:

90.3N

Explanation:

⊥mg = (0.170 m)(1.20 kg) 9.81 m/s

τ ball = r⊥Wball = (0.340 m)(1.42 N) = − 0.483 N ⋅m

F − 2.001− 0.483 N ⋅m = 0

F = 2.484 N ⋅m

0.0275 m = 90.3 N

The net torque acting on the forearm and hand is 90.3N

Torque is a measure of the pressure that can motivate an object to rotate about an axis. simply as pressure is what causes an object to accelerate in linear kinematics, torque is what reasons an item to collect angular acceleration. Torque is a vector amount.

⇒mg = (0.170 m)(1.20 kg) 9.81 m/s

⇒torque = r⊥weight of the ball

⇒ (0.340 m)(1.42 N) = − 0.483 N ⋅m

⇒F = − 2.001− 0.483 N ⋅m = 0

⇒F = 2.484 N ⋅m

⇒0.0275 m = 90.3 N

Learn more about Force here:-

#SPJ2

The uniform acceleration of the car is 4.485 m/s².

The uniform acceleration of the car is calculated as follows;

v² = u² + 2as

a = (v² - u²)/2s

where;

a = (41² - 28²)/(2 x 100)

a = 4.485 m/s²

Thus, the uniform acceleration of the car is 4.485 m/s².

Learn more about uniform acceleration here: https://brainly.com/question/2505743

#SPJ1

Answer: The force acting on the proton of charge ​1.5 x10-19 C moving with velocity 1.5 x10-19 C under the influence of a magnetic field of 0.7 T will be 3.15×10^-13 N.

Explanation: To find the answer we need to know more about the Lorentz magnetic force.

                                  F= q (v× B)

                               [tex]F= qvBsin\alpha[/tex]  where, [tex]\alpha[/tex] is the angle between v and B.

                                [tex]B=0.7 T\\q=1.5*10^{-19}C\\v= 3*10^{6}m/s.\\\alpha =90 degree.\\[/tex] because, from the question it is clear that the proton is moving along x axis and the magnetic field is along the y axis.

                      [tex]F=qvBsin\alpha =1.5*10^{-19}C*3*10^6 m/s*0.7T*sin (90)\\F=3.15*10^{-13}N[/tex]

Thus, we can conclude that the Lorentz force acting on the proton will be 3.15×10^-13 N.

Learn more about the Lorentz magnetic force here:

https://brainly.com/question/28047923

#SPJ1

In response to a magnetic field of 0.7 T, a proton with a charge of 1.5 x 10-19 C travelling at a speed of 1.5 x 10-19 C will experience a force of 3.15 x 10^-13 N.

We need to learn more about the Lorentz magnetic force in order to locate the solution.

                                      F= Q (v× B)

                                   [tex]F=QvBsin\alpha[/tex]

[tex]\alpha[/tex] the angle between v and B is, where.

                           [tex]F=3.15*10^{-13}N[/tex]

Thus, we can infer that the proton will be subject to a 3.15 10^-13 N Lorentz force.

Learn more about the electromagnetic force here:

https://brainly.com/question/11961868

#SPJ1

C. Graph representing a linear relationship between mass on the x-axis and kinetic energy on the y-axis.

Kinetic energy is the energy possessed by a body due to its motion.

K.E = ¹/₂mv²

where;

The kinetic energy of a body is directly proportional to the mass of the object.

Thus, the correct relationship between kinetic energy and mass is Graph representing a linear relationship between mass on the x-axis and kinetic energy on the y-axis.

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ1

(a) The tension the musician must stretch it is 147.82 N.

(b) The percent increase in tension is needed to increase the frequency is 26%.

v = √T/μ

where;

v = Fλ

in fundamental mode, v = F(2L)

v = 2FL

v = 2 x 65.4 x 0.6 = 78.48 m/s

v = √T/μ

v² = T/μ

T = μv²

T = 0.024 x (78.48)²

T = 147.82 N

v = 2FL = 2 x 73.4 x 0.6 = 88.08 m/s

T = μv²

T = (0.02)(88.08)²

T = 186.19 N

= (186.19 - 147.82)/(147.82)

= 0.26

= 0.26 x 100%

= 26 %

Thus, the tension the musician must stretch it is 147.82 N.

The percent increase in tension is needed to increase the frequency is 26%.

Learn more about tension here: https://brainly.com/question/24994188

#SPJ1

The work done by gas is 0.753 J and change in internal energy is 4.247J

So we are given that mass is 2kg , radius 1 cm and the amount of heat is 5 cm

The piston raised by 2.4cm

As we know that Work done is PΔV

Where ΔV is change in volume

Therefore ΔV =  πr^2 h = π x (.01)^2 x .024 =7.53×10^(-6)m^3

Here pressure is 10^5 pa

So W = [tex]10^5\times7.53\times10^-(6)[/tex]

Therefore W = 0.753 J

Now coming to change in internal energy

Change in Internal Energy = Heat Added - Energy lost in work

∴ 5J - 0.753 J = 4.247J

Hence the change in internal energy is 4.247 J

Learn more about Work done here

https://brainly.com/question/16951089

#SPJ1  

From the calculation, the atomic weight of the boron atom is 10.812.

We can find the atomic weight of boron from;

(19.78/100 * 10.0129) + ( 80.22/100 * 11.00931)

= 1.981 + 8.831

= 10.812

The number of protons, neutrons, and electrons in the following isotopes are;

N - 7 electrons, 7 protons and 7 neutrons

Cl - 17 electrons, 17 protons and 18 neutrons

Ca - 20 protons, 20 electrons and 28 neutrons

Cu - 29 protons, 29 electrons and 3 neutrons

U - 92 protons, 92 electrons and 138 neutrons

The number of outer shell electrons in the atoms are;

Na - 1

P - 5

Br - 7

I - 7

Te - 6

The elements are classified as follows;

Radon - nonmetal

Francium - metal

Arsenic - semiconductor

phosphorus - nonmetal

Hafnium - metal

Learn more about the periodic table:https://brainly.com/question/11155928

#SPJ1

Answer:

The metalloids are located on the right side of the periodic table in a "step-like" arrangement.

All of the possible metalloids are:

boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te), and polonium (Po)

The speed of the ball at the given distance and time of motion is 4 m/s.

The speed of an object is the rate of change of distance traveled by the object with time.

Speed is a scalar quantity because it has only magnitude and no direction. It is measured in meters per second.

For a ball that travelled a distance of 20 m and displacement of 10 m in 5 seconds​, the speed of the ball at the given distance and time of motion is calculated as follows;

Speed of the ball = distance traveled by the ball / time of motion

speed of the ball = 20 m / 5 s

speed of the ball = 4 m/s

Thus, the speed of the ball at the given distance and time of motion is 4 m/s.

Learn more about speed here: https://brainly.com/question/6504879

#SPJ1

Using the statistical definition of entropy, The entropy of a system W = 4 is 1.91×10²³.

Entropy is typically referred to as a measurement of a system's randomness or disorder. In 1850, a German physicist named Rudolf Clausius first proposed this idea. Entropy is a thermodynamic property used to characterize a system's behavior in terms of temperature, pressure, entropy, and heat capacity. This thermodynamic explanation took the systems' equilibrium condition into account.

Entropy can be calculated using a mathematical expression.

Entropy = Total change of heat / thermodynamic temperature

S= KblnW

S is the statistical entropy

The value of Boltzmann's constant is 1.38×10⁻²³.

S=  1.38×10⁻²³ ln(4)

S = 1.91×10⁻²³

Using the statistical definition of entropy, The entropy of a system W = 4 is 1.91×10²³.

To learn more about entropy, refer to:

https://brainly.com/question/1859555

#SPJ9

Answer: C.

1.91 × 10⁻²³ joules/kelvin

Explanation: edmentum

Answer:

98.11 I think

Explanation:

I really hope this helps have a wonderful day

The velocity of a 55.0-kg person hitting the ground, is mathematically given as

vt=39.5983m/s

Generally, the equation for is  mathematically given as

mass of squirrel,

[tex]m=550 \mathrm{~g}\\\\Surface area, $A=945 \mathrm{~cm}^{2}=88 \times 10^{-3}$\\\\Height, $h-4 \mathrm{~m}$\\[/tex]

Terminal velocity is given by:

[tex]$v_{i}=\sqrt{\frac{2 m g}{\rho A C}}$[/tex]

where \rho is the density of fluid that is falling and it is given by

[tex]$\rho=\frac{m}{V}$[/tex]

since, volume =area * height

[tex]^{\rho=} \frac{0.55 \mathrm{Kg}}{0.0945 \mathrm{~m}^{2} \times 4.0 \mathrm{~m}}\\\\$\rho=0.1455 \mathrm{Kg} / \mathrm{m}^{3}$[/tex]

A is the surface area of squirrels.

C is the drag coefficient.

The surface area facing the fluid is given by:

[tex]A_{f}=\frac{0.0945 \mathrm{~m}^{2}}{2} \\\\\\ A_{f}=0.04725 \mathrm{~m}^{2}[/tex]

so, terminal velocity is :

[tex]$v_{t}=\sqrt{\frac{2 \times 0.55 \mathrm{Kg} \times 9.8 \mathrm{~m} / \mathrm{s}^{2}}{0.1455 \mathrm{Kg} / \mathrm{m}^{3} \times 0.04725 \mathrm{~m}^{2} \times 1}}$[/tex]

Vt=39.5983

In conclusion, the terminal velocity of the squirrel is 39.5983m/s

Read more about terminal velocity

https://brainly.com/question/2654450

#SPJ1

Based on the calculations, the sound intensity level is equal to 1.0 × 10⁻⁵ W/m².

Mathematically, sound intensity level can be calculated by using this formula:

[tex]\beta = 10 log(\frac{I}{I_{ref}} )[/tex]

Where:

I is the intensity of the sound.

Note: The reference value of sound intensity is equal to 1.0 × 10⁻¹² W/m².

Rewriting the formula, we have:

β/10 = logI - logIo

Substituting the parameters into the formula, we have;

60/10 = logI - log(1.0 × 10⁻¹²)

6 = logI + 12

logI = 6 - 12

logI = -6

I = 1.0 × 10⁻⁵ W/m².

Read more on sound intensity here: https://brainly.com/question/17062836

#SPJ1

The correct response for each of the condition given in the questions are,

To find the answer, we have to know about the Archimedes principle.

                               [tex]F-W=0\\F=W\\W=mg, where.\\m=density*volume=d*V\\V=\frac{4}{3} \pi r^3[/tex]

                            [tex]d_wVg = d_0(\frac{4}{3}\pi r^3 ) g \\d_wV = d_0(\frac{4}{3}\pi r^3 )[/tex]           (1)

Case 1:

Case 2:

Case 3:

Thus, we can conclude that,

Learn more about Archimedes principle here:

https://brainly.com/question/787619

#SPJ1

The percent difference between two numbers [tex]x[/tex] and [tex]y[/tex] is given by

[tex]\dfrac{|y-x|}x \times 100\%[/tex]

The absolute value is there because we only care about the absolute percent difference, and not taking into account whether we go from [tex]x[/tex] to [tex]y[/tex] or vice versa. If we remove them, we have two possible interpretations of percent difference.

For example, the (absolute) percent difference between 3 and 6 is

[tex]\dfrac{|6-3|}3 \times 100\% = 100\%[/tex]

In other words, we add 100% of 3 to 3 to end up with 6. This is the same as the percent difference going from 3 to 6. On the other hand, the percent difference going from 6 to 3 is

[tex]\dfrac{3-6}3\times100\%=-50\%[/tex]

which is to say, we take away 50% of 6 away from 6 to end up with 3.

"Make comparisons to object measurements" tells us that the differences should be computed relative to "measurements for object". In other words, take [tex]x[/tex] from the left column and [tex]y[/tex] from the right column.

[tex]\dfrac{|7.1-7.3|}{7.1} \times 100\% \approx 2.82\%[/tex]

[tex]\dfrac{|4.8-5.0|}{4.8} \times 100\% \approx 4.17\%[/tex]

[tex]\dfrac{|7.2-7.5|}{7.2} \times 100\% \approx 4.17\%[/tex]

The percentage difference are 2.82%, 4.17%, 4.17%.

The percent difference between two numbers a and b is given by formula:

[tex]\frac{y-x}{x}*100[/tex]

We are given absolute value as we are only concerned about the absolute percent difference.

Making comparisons to object measurements determines that the differences should be computed relative to object measurements.

Here take from the left column and  from the right column.

a) [tex]\frac{7.3-7.1}{7.1} *100=2.82[/tex]%

b) [tex]\frac{5.0-4.8}{4.8} *100=4.17[/tex]%

c) [tex]\frac{7.5-7.2}{7.2} *100=4.17[/tex]%

Learn more about percentage difference click here https://brainly.com/question/27070570

#SPJ1

Answer: True

hope this helps!

Based on the calculations, the ratio of the intensity of Ir to Ip is equal to 50.12.

Mathematically, sound intensity level can be calculated by using this formula:

[tex]\beta = 10 log(\frac{I}{I_{ref}} )[/tex]

Where:

I is the intensity of the sound.

Making I the subject of formula, we have:

I = Io × [tex]10^{\frac{\beta }{10} }[/tex]

For Ip, we have:

Ip = Io × [tex]10^{\frac{104 }{10} }[/tex]

Ip = Io × [tex]10^{10.4}[/tex]

For Ir, we have:

Ir = Io × [tex]10^{\frac{121 }{10} }[/tex]

Ir = Io × [tex]10^{12.1}[/tex]

Now, we can find the ratio of the intensity:

Ir/Ip = Io × [tex]10^{12.1}[/tex]/Io × [tex]10^{10.4}[/tex]

Ir/Ip = [tex]10^{12.1}[/tex]/[tex]10^{10.4}[/tex]

Ir/Ip = [tex]10^{12.1 -10.4}[/tex]

Ir/Ip = [tex]10^{1.7}[/tex]

Ir/Ip = 50.12.

Read more on sound intensity here: https://brainly.com/question/17062836

#SPJ1

The Answer is Option C. Friction.

Explanation:

The friction force acts in the forward direction on the rear wheel and it acts in the backward direction on the front wheel. The magnitude of friction force on the rear wheel can be more, equal or less than that on the front wheel.

Answer:

Accuracy measures how close results are to the true or known value. Precision, on the other hand, measures how close results are to one another.

Accuracy means the state of being accurate, without any mistakes and the results should be 100% true.

Whereas, precision means, approximately true or almost true.

Hope it help you

Answer:

Reflection can simply be defined as the reflection of light when it strikes the medium on a plane. Refraction can be defined as the process of the shift of light when it passes through a medium leading to the bending of light. The light entering the medium returns to the same direction.

Answer:

reflection is your image and refraction is light

The elastic potential energy of the block-spring system is 0.906 J.

Velocity of the block , v = 0.83 m/s.

Elastic potential energy is the energy stored in a stretched or compressed elastic material.

The elastic potential energy of the block-spring system = 725 * 0.05²/2 The elastic potential energy of the block-spring system = 0.906 J

The elastic potential energy of the spring is converted to kinetic energy of the block.

1/2 mv² = 0.906 J

where v is velocity

v = √(0.906 * 2)/2.6

v = 0.83 m/s.

In conclusion, elastic potential energy is present in compressed or stretched elastic materials.

Learn more about elastic potential energy at: https://brainly.com/question/20797227

#SPJ1

10,378.82 m/s is the second cosmic speed.

69,801 km is the radius of the synchronous orbit of a satellite.

Given

Mass of planet = 4.74 × [tex]10^{24}[/tex] kg

Radius of planet = 5870 km = 5870000m

First Cosmic speed = 7.34 km/sec

1) Second cosmic speed i.e. the minimum speed required for a satellite to break free permanently from the planet is also known as the escape velocity of a satellite.

It can be calculated by

v = √2GM/r where,

v= Escape velocity of the satellite

G = Gravitational constant

M = Mass of planet

r = Radius of planet

v = √[( 2 x 6.67 x 10⁻¹¹ x 4.74 x 10²⁴) / (5870 x 10³)]

v = 10,378.82 m/s

2) Speed of the satellite at the given period

v = 2πr/T where,

T= Time period of rotation = 16.6 × 3600 seconds

r = v×T/2π

r = (7,338.93 x 16.6 x 3600 s) / (2π)

r = 69,801 km

Hence

The Second Cosmic Speed i.e. the minimum speed required for a satellite to break free permanently from the planet is 10,378.82 m/s.

And the radius of the synchronous orbit of a satellite is 69,801 km.

Learn more about cosmic speed here https://brainly.com/question/15351190

#SPJ1

The confidence interval is given as lower interval is -0.77 while The upper interval is 1.67

Multivitamin treatment

n1 is 10

σ1 = 1.8

x21 = 5

vitamin C treatment

n2 = 10

σ2 = 1.5

x2 = 4.55

zα/2 = 1.645

The formula for the confidence interval is given as

(x1 - x2) ± zα/2[tex]\sqrt{\frac{sd1^2}{n1}+\frac{sd2^2}{n2} }[/tex]

When we input the values we have above we would have

CI = (-0.7688550 , 1.668855 )

The the lower interval is -0.77

The upper interval is 1.67

Read more on confidence interval here:

https://brainly.com/question/2141785

#SPJ1

A random selection of volunteers at a research institute has been exposed to a weak flu virus. After the volunteers began to have flu symptoms, 10 of them were given multivitamin tablets daily that contained 1 gram of vitamin C and 3 grams of various other vitamins and minerals. The remaining 10 volunteers were given tablets containing 4 grams of vitamin C only. For each individual, the length of time taken to recover from the flu was recorded. At the end of the experiment the following data were obtained:

Treated with multivitamin

Days to recover from flu

2.4, 6.4, 9.1, 4.1, 4.6, 6.4, 6.4, 3.2, 6.9, 0.5

Treated with Vitamin C

5.2, 3, 3.6, 5.5, 7.5, 6.7, 1.3, 1.9, 5.3, 5.5

Suppose that it is known that the population standard deviation of recovery time from the flu is 1.8 days when treated with multivitamins and that the

population standard deviation of recovery time from the flu is 1.5 days when treated with vitamin C tablets. Suppose also that both populations are

approximately normally distributed. Construct a 90% confidence interval for the difference µµ₂ between the mean recovery time when treated with

multivitamins (μ,) and the mean recovery time when treated with vitamin C only (H2). Then complete the table below.

Carry your intermediate computations to at least three decimal places. Round your answers to at least two decimal places. (If necessary, consult a list of formulas.)

What is the lower limit of the 90% confidence interval?

What is the upper limit of the 90% confidence interval?

The solution to the questions are given as

Given, $B(t)=(1.4 T) e^{-0.057 t}$

[tex]$\varepsilon m f(\varepsilon)=-\frac{d \phi_{B}}{d t}[/tex]

[tex]\quad$ and, $\phi_{B}=\int B \cdot d A=\int B \cdot d A \cdot \cos \theta$[/tex]

[tex]\begin{aligned}\text { Here, } \theta &=30^{\circ} ; \\A &=\pi r^{2} \\a n \delta, R &=0.75 \mathrm{~m} \\\therefore \varepsilon &=-\frac{d}{d t}(B A \cdot \cos \theta)=-A \cdot \cos \theta \cdot \frac{d}{d t}(B(t)) \\\therefore \varepsilon &=-\pi R^{2} \cdot \cos \theta \cdot \frac{d}{d t}\left(e^{-0.057 t}\right)(1.4 T) \\\therefore \varepsilon &=+\pi(0.75)^{2} \cdot \cos 30 \cdot(0.057)(1.4) \cdot e^{-0.057 t}\left\{\because \frac{d}{d t} e^{-x}=-x \cdot e^{-x} .\right.\end{aligned}[/tex]

[tex]\varepsilon &=(0.12v)e^{0.057t}[/tex]

(b) [tex]Here, $\varepsilon_{0}=0.12 \mathrm{~V} \quad\left(a t_{2} t=0 \mathrm{sec}\right)$[/tex]

[tex]\begin{aligned}&\therefore 1 . \varepsilon_{0}=\varepsilon_{0} \cdot e^{-e .057 t} \\&\therefore e^{0.057 t}=10 \quad \text { (taking log both thesides) } \\&\therefore 0.057 t=\ln (10)=2.303 \\&\therefore t=40.39 \mathrm{sec}\end{aligned}[/tex]

c)

In conclusion, the direction of the induced current will be Counterclockwise.

Read more about current

https://brainly.com/question/13076734

#SPJ1

Answer:

(A) By reducing friction

Answer:

A

Explanation:

The current is 1.13* 10^{-4}A

Given that r = radius of the coil = 4 cm = 0.04 m

Area of coil is given as

A = πr²

A = (3.14) (0.04)² = 0.005024 m²

N = Number of turns = 500

R = Resistance = 600 Ω

B = magnetic field = (0.0120)t + (3 x 10⁻⁵) t⁴

Taking derivative at both the side

[tex] \frac{dB}{dt} = (0.120 + (12 \times 10^-5)t^3)[/tex]

Induced current is given as

[tex]i= (\frac{NA}{R} )( \frac{db}{dt} )[/tex]

[tex]i \: = (\frac{NA}{R})(12 \times 10 ^{-5} )t^3[/tex]

substituting the value t = 5

[tex]i = ( \frac{(500)(0.005024)}{600}) (12 \times 10 ^{-5} )5^3[/tex]

[tex]i = 1.13 \times 10 ^{ - 4} A[/tex]

Hence the current is

[tex]1.13 \times 10^-4A[/tex]

Learn more about Electric current here

https://brainly.com/question/1100341

#SPJ1

The Electric current is 1.11* 10^{-4}A


Given that the coil's radius is 3.55 cm (0.35 m),

The formula for the coil's area is A = r2 A = (3.14) (0.35)2 = 0.005024 m2.

R = Resistance = 600 N = Number of spins = 500 B = Magnetic field = (0.0120)

t + (3 x 10⁻⁵) t⁴

The number t = 5 is substituted for taking the derivative at both the induced current and the electric current.

The Electric current is therefore 1.11* 10^{-4}A
Electric current - The rate of electron passage in a conductor is known as electric current. The ampere is the electric current's SI unit. Electrons are little particles that are part of a substance's molecular structure. These electrons can be held loosely or securely depending on the situation.

To learn more about electric current please visit -https://brainly.com/question/12791045
#SPJ1

The minimum necessary height of the IV bag above the position of the needle, if the density of the solution is 1.308kg/L, and the pressure in the vein is 35.7 mmHg is, 2.78m.

To find the answer, we need to know more about the pressure exerted by a liquid column.

                                                [tex]P=[/tex] ρgh

                                           [tex]density=1.308 kg/L\\\\P=35.7 mmHg.\\[/tex]

                                       [tex]h=\frac{P}{density*g} =\frac{35.7}{1.308*9.8}\\\\ h=2.78 m[/tex]

Thus, we can conclude that, the height of the Iv bag is 2.78 m above the position of needle.

Learn more about the pressure exerted by a liquid column here:

https://brainly.com/question/28106909

#SPJ1

If the solution has a density of 1.308 kg/L and the vein pressure is 35.7 mmHg, the minimum height of the IV bag above the needle position is 2.78 m.

We need to learn more about the pressure that a liquid column exerts in order to determine the solution.

                            [tex]P=[/tex] ρgh

                        [tex]Density=1.308kg/L\\P=35.7mmHg[/tex]

                           [tex]h=\frac{P}{density*g}\\\\ h=2.78m[/tex]

As a result, we may say that the I.V. bag is 2.78 m above the ground.

Learn more about the pressure exerted by a liquid column here:

https://brainly.com/question/28106909

#SPJ1