The planes will be 900 miles apart at 11:12 am.
Speed = Distance / time
Distance = Speed x time
In t hours, first plane travels = 600 t miles
In t hours, the second plane travels =150 t miles
After t hours the distance between the two planes is:
(600t+150t)= 750t ( since both travel in opposite directions)
When the distance is 900 miles:
750t= 900
Solve for t:
t= 900/750
t= 1.2 hours
After 1.2 hours.
1.2 x 60 = 72 minutes = 60 +12 = 1 hour and 12 minutes
Since both leave at 10 pm:
10am + 1 hour and 12 minutes : 11:12 am
They will be 900 miles apart at 11:12 am
Each one traveled:
Plane 1:
Distance: Speed x time = 600 mph x 1.2 = 720 miles
Plane 2:
Distance = Speed x time = 150 mph x 1.2 = 180 miles
What is distance?
An aeroplane or spacecraft's altitude can be used to determine how far away from Earth it is by measuring the distance between their nearest points. In Euclidean geometry, the same notion of distance is used to define perpendicular distance between affine subspaces, distance from a point to a line, and distance from a point to a plane.To know more about distance, click the link given below:
https://brainly.com/question/15172156
#SPJ4
A horizontal rope is tied to a 50 kg box on friction-less ice. What is the tension in the rope if the box moves at a steady 5. 0 m/s?.
The horizontal rope is tied to a 50kg box on frictionless ice. The tension in the rope if the box moves at a steady 5m/s is zero.
Tension is defined as a type of pulling force when an external force acts at one of the ends of the rope and the force appears all along the length of the string/rope. The tension of the string acts in the opposite direction of the external force. The tension in the rope due to the box is given as, T= ma, as it is a frictionless surface. The mass of the box, m= 50kg. The velocity of the box, v=5m/s. Since the box moves with a steady speed, the velocity of the box is constant. If a body moves with a constant speed or constant velocity, then the acceleration of that body is zero, i.e. the body has no acceleration. Since, a=0 m/s², the value of ma= m×0= 0 N. So, the tension in the horizontal rope due to the 50kg mass moving at a constant speed of 5.0m/s is zero.
For further learning about tension in the string, refer to the link: https://brainly.com/question/29376832
#SPJ4
is water wet? or does it make things wet?
Water is not wet itself or it does not make things wet. The water makes bond with the other materials through adhesive forces.
What is Wetness?Wetness is a description of the experience of water, it is a quality of the liquid water. Liquid water is not itself wet, however it cannot even make things actually wet. Wetness is the ability of a liquid to adhere to the surface of a solid material, so when we say that something is wet, we mean that the liquid material is sticking to the surface of a material.
An adhesion is present between two things and something that the water molecules cannot do to itself. Water has to be wetted by something else or it makes no sense at all. Water can be wetted easily by oil or another foreign liquid, however it cannot wet itself.
Learn more about Wetness here:
https://brainly.com/question/8690223
#SPJ9
A 79 kg olympic diver jumps from
a 27 meter diving board
A. What is the initial potential energy
of the diver?
B. What is its final kinetic energy
before she hits the water?
C. What is the velocity of the diver as
she hits the water?
The initial potential energy of the diver is [tex]20,507.4 J[/tex], The final kinetic energy of the diver is [tex]1/2 (79 kg) \times (18.77 m/s)^2 = 14,030.3 J, C[/tex]. The velocity of the diver just before hitting the water is approximately [tex]18.77 m/s.[/tex]
What are the energy conservation concepts?To resolve this issue, we can make use of energy conservation concepts. The diver only has potential energy at the beginning of the jump, which is transformed into kinetic energy as the diver falls toward the water.
A. The initial potential energy of the diver can be calculated as:
potential energy [tex]= mgh[/tex]
Where m is the mass of the diver (79 kg), g is the acceleration due to gravity [tex](9.8 m/s^2)[/tex] And h is the height of the diving board (27 m).
Therefore, potential energy [tex]= (79 kg) \times (9.8 m/s^2) \times (27 m) = 20,507.4 J[/tex]
The initial potential energy of the diver is [tex]20,507.4 J.[/tex]
B. All the initial potential energy has been transformed into kinetic energy right before the diver reaches the water. As a result, the diver's total kinetic energy can be determined as follows:
final kinetic energy [tex]= 1/2 mv^2[/tex]
Where v is the diver's speed shortly before entering the water, and m is the diver's mass (79 kg).
We can compare the initial potential energy to the final kinetic energy by applying the law of conservation of energy:
[tex]mgh = 1/2 mv^2[/tex]
Solving for v, we get:
v = [tex]\sqrt{2gh}[/tex]
Where sqrt means square root.
Plugging in the values, we get:
[tex]v = sqrt(2 x 9.8 m/s^2 x 27 m) = 18.77 m/s[/tex]
The final kinetic energy of the diver is [tex]v = sqrt(2 x 9.8 m/s^2 x 27 m) = 18.77 m/s[/tex]
C. The velocity of the diver just before hitting the water is approximately
[tex]18.77 m/s.[/tex]
Therefore, The velocity of the diver just before hitting the water is approximately [tex]18.77 m/s.[/tex]
Learn more about energy conservation here:
https://brainly.com/question/2137260
#SPJ1
Is cc is the same as ml ?
Indeed, the cc and ml units of volume are equivalent.
Throughout the measuring process, a physical quantity is contrasted with a recognized standard quantity of some type.
For instance, when a measurement is represented as 10 kg, 10 denotes the measurement's magnitude and kg denotes the standard unit used to indicate the mass of the physical object.
Due to the fact that they both carry the same amount of substance, one ml and one cc, or one cubic centimetre, are equal, according to the established relations.
To know more about volume, visit,
https://brainly.com/question/463363
#SPJ4
how to calculate the angular to linear acceleration?
To calculate the linear acceleration of an object in terms of its angular acceleration, you need to use the formula:
a = r * [tex]\alpha[/tex]
Linear acceleration is a measure of how quickly an object's velocity changes over time. It is defined as the rate of change of the object's velocity, and it is usually measured in units of meters per second squared (m/s^2). Linear acceleration can be caused by several different factors, including the application of a force, a change in the direction of motion, or a change in the speed of motion. For example, a car accelerating from a stop sign experiences linear acceleration as it increases its velocity over time.
Linear acceleration is an important concept in physics, engineering, and many other fields. It is used to describe the motion of objects and to calculate the forces that are acting on them. Linear acceleration can be positive (when an object is speeding up), negative (when an object is slowing down), or zero (when an object is moving at a constant speed).
To learn more about Formal Organization structure visit here:
brainly.com/question/29823573
#SPJ4
HELPPPPPPP
8. Explain the process of making ice cream in terms of heat energy transfer. Be sure to explain why the liquid milk
mixture changed into solid form AND why the ice in the bag started changing to a liquid. (Where was the heat originally
and where did it go? How do you know-what data do you have that proves the thermal energy was transferred?)
Making ice cream is a great way to explore thermal energy transfer. The liquid milk mixture changed to a solid during
the process because thermal energy transferred from the liquid milk to
The ice changed to a
liquid during the process because thermal energy transferred from the
to the ice. Thermal energy
transfer is confirmed by the states of matter changes of the milk mixture and the ice. It is also confirmed by the change
in temperature of the items. The milk mixture had a
in temperature, which confirms thermal
in temperature, which confirms thermal energy being
energy loss. The ice had a(n).
gained.
Heat is transferred from the cream solution to the ice leading to the ice melting and colder.
What happens to heat energy when making ice cream?Heat energy goes from the regions with more heat energy to other regions with less heat energy. The milk mixture has more heat energy as compared to the salt and ice. Heat energy goes from the milk mixture to the ice and salt. The milk mixture releases heat energy, which resulted in cooling and freezing which eventually becomes the ice cream solid.
Ice absorbs energy to melt. Heat is transferred from the cream solution to the ice, making the ice melt and the cream colder. Eventually, as the ice absorbs more energy from the cream mixture it will start freezing.
So we can conclude that Heat is transferred from the cream solution to the ice making the ice melt and cold the cream.
Learn more about the heat here: https://brainly.com/question/934320
#SPJ1
whats the scientific method in order
Answer:
See explanation
Explanation:
Observe, question, research, hypothesize, experiment, review hypothesis, report results.
what is the meaning of spectrum
The term "spectrum" refers to a range of different colors, frequencies, or wavelengths.
It is often used to describe the visible spectrum of light, which is made up of different colors that we can see, such as red, orange, yellow, green, blue, and violet. The spectrum can also refer to other types of electromagnetic radiation, such as radio waves, microwaves, infrared radiation, ultraviolet radiation, X-rays, and gamma rays.
In addition to its use in the field of physics, the term "spectrum" can also be used more generally to describe a range of different things or qualities. For example, one might talk about a spectrum of political beliefs, a spectrum of emotions, or a spectrum of musical styles.
TO know more about spectrum here:
https://brainly.com/question/6836691#
#SPJ11
Why are terrestrial planets denser than jovian planets?- Actually, the jovian planets are denser than the terrestrial planets.- The terrestrial planets formed in the inner solar nebula, where only dense materials could condense.- The Sun's gravity gathered dense materials into the inner solar system.- Gravity compresses terrestrial planets to a higher degree, making them denser.
The reason behind the terrestrial planets denser than Jovian planets are gravity compresses terrestrial planets to a higher degree, making them denser. (option d)
The terrestrial planets formed closer to the Sun in the inner solar system, where the protoplanetary disk was hotter and denser. This meant that only the most massive and dense materials, such as metals and rock, could condense and form planets.
In mathematical terms, the density of a planet can be expressed as its mass divided by its volume:
density = mass/volume
The mass of a planet depends on the amount of material it contains, while the volume of a planet depends on its size and shape. The more massive a planet is, the greater its gravitational pull, which can cause the planet's materials to compress and increase its density.
Overall, the density of a planet is determined by a complex interplay of factors, and while terrestrial planets tend to be denser than Jovian planets, there are exceptions to this rule.
Hence option (a) is correct.
To know more about planets here
https://brainly.com/question/14581221
#SPJ4
What does work mean in physics?
In physics, work is defined as the energy transferred to or from an object by a force acting on the object over a certain distance. It is typically measured in units of joules (J) or foot-pounds (ft-lbs).
More formally, work is defined as:
W = Fd cosθ
Energy is the ability to do work, and it can come in various forms such as thermal, electrical, kinetic, potential, chemical, and nuclear energy. Energy is a fundamental concept in physics that plays a crucial role in everyday life. For example, we need energy to light up our homes, power our cars, and run our electronic devices.
Energy is also responsible for the movement of objects, the flow of fluids, and the transfer of heat. This means that the total amount of energy in a closed system remains constant, and any change in the system's energy must come from a transfer of energy from one form to another.
To learn more about Energy visit here:
brainly.com/question/8306722
#SPJ4
A simple model shows how drawing a bow across a violin string causes the string to vibrate. As the bow moves across the string, static friction between the bow and the string pulls the string along with the bow. At some point, the tension pulling the string back exceeds the maximum static friction force and the string snaps back. This process repeats cyclically, causing the string's vibration. Assume the tension in a 0. 33-m -long violin string is 70 N , and the coefficient of static friction between the bow and the string is μs = 0. 80. If the normal force of the bow on the string is 0. 75 N , how far can the string be pulled before it slips if the string is bowed at its center?
The normal force of the bow on the string is 0.75 N. The coefficient of static friction between the bow and the string is 0.80. The string can be pulled before it slips if the string is bowed at its center as far as 106.06 m.
The maximum static friction force that can be applied to the string before it slips is the product of the normal force and the coefficient of static friction:
Fmax = μs × N = 0.80 × 0.75 N = 0.60 N
The tension in the string is 70 N. The string is bowed at its center, so the tension force is evenly distributed on both sides of the bow. The tension force on one side of the bow is:
Ft = 70 N / 2 = 35 N
The string will slip when the tension force exceeds the maximum static friction force:
Ft > Fmax
35 N > 0.60 N
The string can be pulled a distance of x before it slips. The tension force is equal to the product of the string's length and the distance the string is pulled:
Ft = L × x
35 N = 0.33 m × x
x = 35 N / 0.33 m = 106.06 m
The string can be pulled 106.06 m before it slips.
Therefore, the answer is 106.06 m.
Learn more about normal force at https://brainly.com/question/26497411
#SPJ11
What is the frequency of light when the energy for a mole of photons is 1.55 × 10^13 J? a)3.88 × 10^22 Hz b)1.03 × 10^20 Hz c)6.18 × 10^21 Hz d)2.58 x 10^23 Hz
One photon has an energy of E. Consequently, one mole of neutrons has an energy of EAW. The Avogadro equation is shown here as A.
What does the word "energy" mean?
The capacity to perform work is energy. Energy is referred to by scientists as the capacity for work. People have figured out how to transform energy from one type to the other and use it to accomplish tasks, making modern civilization possible. People utilize energy to move around on foot and by bicycle, in cars and boats on the sea, and to cook food in stoves.
Why is energy necessary, and what is it?
Energy is the capacity to carry out work. Energy is referred to by scientists as the capacity for work. People have figured out how to transform energy from one type to another and use it to accomplish tasks, making modern civilization possible.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ4
(4\%) Problem 3: A uniform electric field of magnitude 42 N/C is parallel to the x axis. A circular loop of radius 24 cm is centered at the origin with the normal to the loop pointing 55 ∘ above the x axis. - $50% Part (a) Calculate the electric flux in, newton squared meters per coulomb, through the loo Φ= N⋅m 2 /C Hints: deduction per hint. Hints remaining: 2 Feedback: deduction per feedback.
The electric flux through the loop is approximately 3.42 newton squared meters per coulomb (N·m^2/C).
The electric flux through a surface is given by the product of the electric field passing through the surface and the area of the surface,
Φ = EAcos(θ)
where Φ is the electric flux, E is the electric field, A is the area of the surface, and θ is the angle between the electric field and the normal to the surface.
In this problem, the electric field is parallel to the x-axis, so its angle with the normal to the circular loop is θ = 55°.
The area of the circular loop is A = πr^2, where r is the radius of the loop. Thus, the electric flux through the loop is:
Φ = EAcos(θ)
= (42 N/C)(π(0.24 m)^2)*cos(55°)
≈ 3.42 N·m^2/C
To know more about the electric flux, here
brainly.com/question/14544020
#SPJ4
--The complete question is, A uniform electric field of magnitude 42 N/C is parallel to the x axis. A circular loop of radius 24 cm is centered at the origin with the normal to the loop pointing 55 ∘ above the x axis.
(a) Calculate the electric flux in, newton squared meters per coulomb, through the loop.--
he Himalaya Mountains are a range of mountains that is
2,400 km long and that arcs across Pakistan, India, Tibet, Nepal, Sikkim, and Bhutan. The Himalaya Mountains are the highest
mountains on Earth. Nine mountains, including Mount Everest, the highest mountain on Earth, rise to heights of more than 8,000 m. Mount Everest stands 8,850 m tall.
The formation of the Himalaya Mountains began around 80 million years ago. A tectonic plate carrying the Indian subcontinent collided with the Eurasian plate. In the process, the Indian plate was driven beneath the Eurasian plate. This collision caused the uplift of the Eurasian plate and the subsequent formation of the Himalaya Mountains. This process is ongoing today as the Indian plate continues to push under the Eurasian plate. New measurements show that Mount Everest is moving northeast by as much as 10 cm per year.
Part A What type of boundary is being described in the passage, and what two plates are involved?
Part B Describe the geologic process that led to the formation of the Himalaya Mountains.
Answer:
Part A: The boundary being described in the passage is a convergent boundary, where two tectonic plates are colliding. The two plates involved are the Indian plate and the Eurasian plate.
Part B: The geologic process that led to the formation of the Himalaya Mountains began around 80 million years ago when the Indian subcontinent collided with the Eurasian plate. The Indian plate was driven beneath the Eurasian plate, causing the uplift of the Eurasian plate and the subsequent formation of the Himalaya Mountains. This collision continues today, as the Indian plate continues to push under the Eurasian plate, causing the mountains to continue to rise. The process of one plate being driven beneath another is called subduction, and it is a common process that forms mountain ranges around the world.
A satellite travels in a circle at 100m/s. Compare the satellites speed and velocity
In physics, velocity and speed are similar but separate ideas. Speed, which is a scalar quantity, describes the extent of motion or the rate at which an item shifts in space.
What is satellite?A satellite is a body that orbits a planet, star, or moon. For instance, the fact that Earth orbits the sun makes it a satellite.
In physics, velocity and speed are similar but separate ideas. Speed, which is a scalar variable, describes the amount of motion or the rate at which an item shifts in space.
The satellite's speed, which is a scalar measurement of the magnitude of motion, is 100 m/s when it is moving in a circle.
However, because the satellite is moving in a circular path and its velocity has both a magnitude and a direction, it is continually varying.
The satellite's velocity is always moving in the direction of the circle's center, and its magnitude is equal to its speed, or 100 m/s.
Thus, this the comparison of satellites speed and velocity.
For more details regarding satellite, visit:
https://brainly.com/question/9266911
#SPJ9
10 tips on how to study effectively 1. Get organised. 2. Don't skip class! 3. Take notes. 4. Talk to your teacher & ask questions. 5. Space out your studying. 6. Create a study plan - & stick to it. Images Videos en-gb drive dow
10 tips on how to study effectively: Get organised, Don't skip class, Take notes, Talk to your teacher & ask questions, Space out your studying, Create a study plan & stick to it, Images and Videos, Test yourself, Find examples and follow a plan.
Why should we not miss a study session?We must attend all or most of our study sessions because it is one of the best ways to improve our ability to do better in exams. Whenever we miss a class, we might risk missing important work and the assignments.
The classes, notes or assignments can be very helpful in studying and preparing for our class test and exams.
Learn more about study, here:
https://brainly.com/question/30701980
#SPJ9
if the electric flux through a closed surface is zero, the electric field at points on that surface must be zero.
True, if the electric flux through a closed surface is zero, the electric field at points on that surface must be zero.
What does a closed surface's electric flux look like?
The charge encapsulated divided by the permittivity is equal to the total electric flux out of a closed surface. The electric field is multiplied by the surface area projected in a plane perpendicular to the field to get the electric flux across a region.
If there is a net outward flow, the electric flux through a closed surface is positive; if there is a net inward flow, it is negative. If there is a source inside the closed surface, we have a net outward flux, and if there is a sink inside the closed surface, we have a net inward flux. Zero field implies zero flux, but zero flux does not imply zero field.
To learn more about electric flux use link below:
https://brainly.com/question/26289097
#SPJ4
Fill in the blank: Scientists worried that cloned animals would age rapidly because their cells contain ________ as old as the individual they were cloned from.
Scientists worried that cloned animals would age rapidly because their cells contain Clones as old as the individual they were cloned from.
What are Clones?Cloning is a method that scientists employ to make genetically identical copies of genes, cells, or even whole animals.
There are already some clones in nature. When single-celled organisms like bacteria reproduce, they create identical copies of themselves every time. Identical twins in humans are comparable to clones. They have nearly identical genes.
In the lab, scientists also create clones. Genes are frequently cloned for study and improved comprehension. Researchers take DNA from a living thing and place it into a carrier like bacteria or yeast to clone a gene.
Therefore, Scientists worried that cloned animals would age rapidly because their cells contain Clones as old as the individual they were cloned from.
To learn more about Clones, refer to the link:
https://brainly.com/question/12483409
#SPJ9
Some thermometers contain alcohol. Alcohol is used in thermometers because A. is soluble in waterB. is a clear gas when it evaporatesC. expands and contracts easilyD. has a high density
A rate law that is proportional to the concentration of reactants raised to a power, which corresponds to the reactant's stoichiometric coefficient, is often used to describe reactions that can occur in a single step.
What is the reaction's rate constant, 2N2O5 to 2N2O4 O2?rk = [N2O5] = 2.40 10 53.0 10 5 = 0.8 mol L 1. Calculate the concentration of N2O5 using the reaction's rate and rate constant, which are 2.40 mol L-1 second-1 and 3 mol L-5 second-1, respectively.
What happens when 2O3 and 3O2 react in what order?The following is how the chemical reaction 2O3 3O2 develops. The appropriate expression for the rate law is O3 O2 +O (FAST) O+O32O2 (SLOW).
To know more about reactions visit:-
https://brainly.com/question/13316655
#SPJ4
How much is 1 newton to pound?
1 newton is equal to approximately 0.225 pounds.
The newton (N) and pound (lb) are both units of force, with the newton being the standard unit in the International System of Units (SI) and the pound being commonly used in the United States and United Kingdom. The conversion between the two units is not straightforward as they are based on different reference points.
However, using the conversion factor of 1 N = 0.225 lb, we can find out that one newton is equivalent to approximately 0.225 pounds. This means that if a force of 1 newton is applied, it would be equivalent to a force of 0.225 pounds.
To know more about the conversion, here
brainly.com/question/13284831
#SPJ4
A 6 kg bowling ball is rolling with a velocity of 3 m/s. What is the kinetic energy of the bowling ball?.
27J is the kinetic energy of the bowling ball
Describe kinetic energy.
The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
Kinetic energy, which may be seen in the movement of an item or subatomic particle, is the energy of motion. Kinetic energy is present in every particle and moving object. Examples of kinetic energy in action include a person walking, a baseball soaring through the air, a piece of food falling from a table, and a charged particle in an electric field.
Kinetic energy, K.E : 1/2 mv^2
m : 6kg
v : 3m/s
K.E : 1/2 *6*3*3
K.E : 27J
To learn more about Kinetic energy use link below:
https://brainly.com/question/25959744
#SPJ4
a block of wood is floating with one half of its volume out of the water. then it is pushed down so that it is completely underneath the water. use your understanding of buoyant force and archimedes’ principle to determine what happens to the forces on the block of wood.A. The buoyant force on the block is the same in the two cases because the weight per unit volume of the wood has not changed.
B. The buoyant force on the block is the same in the two cases because the weight per unit volume of the water is the same in each case.
C. The buoyant force on the block is greater when the block is completely submerged than it is when the block is floating.
D. The buoyant force on the block is greater when it is floating than when it is totally submerged.
E. The buoyant force on the block is the same in the two cases because the block loses weight as it is submerged.
The force that occurs in a wooden block is the buoyant force on the block is greater when the block is completely submerged than it is when the block is floating.
So Archimedes' Law explains that there is a relationship between weight and upward force on a force if it is put in water. As a result of the upward lift (buoyancy), of course, objects that are in the liquid will experience a weight reduction. As a result, objects lifted in water will feel lighter than when lifted on land.
When submerged, the weight of the object in the liquid is greater than the upward force exerted by the liquid.
So, the compressive force of water < the weight of the object, and the correct answer is C.
Learn more about buoyancy at https://brainly.com/question/28464280
#SPJ4
If a ball is tossed straight up into the air, at what position is its potential energy the greatest? question 6 options: when it begins to fall back to your hand when it approaches the top of its flight when it reaches the top of its flight when it first leaves your hand.
If a ball is tossed up into the air, then its potential energy is greatest when it reaches the top of its flight. So the correct option is Option B.
Potential energy is defined as energy by virtue of its motion. The potential energy of any object at a given time is determined by the relative position of that object at that specific time interval. The ball was tossed straight up from the air. When it just leaves the hand, it has some velocity. So the ball at that specific time interval has maximum kinetic energy and zero potential energy. Then as the ball moves up, its velocity goes on decreasing. So according to the law of conservation of energy, the kinetic energy stored in the ball gets converted into potential energy. Now when the ball has reached its maximum height in its trajectory, now the velocity of the ball at the greatest height becomes zero. So now the ball has zero kinetic energy and maximum potential energy.
For further details about potential energy, refer to the link: https://brainly.com/question/27028397
#SPJ4
If the amplitude of the motion of a simple harmonic oscillator is doubled, by what factor does the maximum speed of the oscillator change?.
If the amplitude of the motion of a simple harmonic oscillator is doubled, the maximum speed of the oscillator increases by a factor of 2.
Here, we have a simple harmonic oscillator with an amplitude of let us say A. We know that the formula for speed of a Simple harmonic oscillator at any given point is :
V = ω[tex]\sqrt{A^{2}-x^{2} }[/tex]
where, V = velocity , A is the amplitude , ω is the angular frequency of the motion and x is the position(displacement) of the oscillator.
We know that the maximum speed of the oscillator is at the mean or equilibrium point where x = 0.
∴ Maximum velocity ⇒ ω[tex]\sqrt{A^{2} }[/tex]
⇒ Maximum Velocity = ωA
Now, doubling up the amplitude,
Maximum velocity when amplitude is doubled ⇒ ω[tex]\sqrt{(2A)^{2} }[/tex]
⇒ω[tex]\sqrt{4A^{2} }[/tex]
⇒2ωA
Now, dividing both the velocities ⇒(Maximum velocity when amplitude is doubled) / (First maximum velocity)
⇒ 2ωA / ωA
⇒ 2
Therefore, Maximum velocity of the oscillator will increase by a factor of 2 when we double up the amplitude.
Learn more about Simple Harmonic Motion here,
https://brainly.com/question/14586609
#SPJ4
The force of gravity pulls down on a book sitting on a desk with 15 Newtons of force while the desk pushes back on the book with 15 Newtons of force. What is the net force and the resulting motion of the book?
The net force acting on the book is zero, since the force of gravity pulling down on the book is balanced by the force of the desk pushing up on the book. This means that the book is not experiencing any acceleration or motion, and is in a state of static equilibrium.
What is gravity?Gravity is a fundamental force of nature that exists between any two objects in the universe that have mass. It is the force that attracts all objects with mass towards one another. The strength of the gravitational force depends on the mass of the objects and the distance between them.
The net force acting on the book is zero, since the force of gravity pulling down on the book is balanced by the force of the desk pushing up on the book. This means that the book is not experiencing any acceleration or motion, and is in a state of static equilibrium.
In other words, the book remains stationary on the desk.
Learn more about gravity here https://brainly.com/question/557206
#SPJ1
The fastest pitched baseball was clocked at 47 m/s. Model the throw as being caused by a constant, horizontal force over a distance of 1. 0 m. A baseball has a mass of 150 g.
The force the pitcher exerts on the ball during this record-setting pitch is 160.15 N. The force exerted on the baseball as a fraction of the pitcher's weight is 0.195.
What is a force?Concepts related to force include thrust, which increases the velocity of an object; drag, which decreases the velocity of an object; and torque, which produces changes in the rotational speed of an object. In an extended body, each part usually applies forces on the adjacent parts; the distribution of such forces through the body is internal mechanical stress.
The given parameters;
the initial velocity of the baseball, u = 47 m/s
distance traveled by the ball, d = 1 m
mass of the baseball, m = 145 g = 0.145 kg
The free-body diagram of the ball during the pitch is in the image added.
The acceleration of the baseball over the given distance is calculated as;
v² = u² - 2as
when the ball stops, the final velocity, v = 0
0 = u² - 2as
2as = u²
a= u²/2s
a = 1140.5 m/s²
The force the pitcher exerts on the ball during this record-setting pitch is calculated as;
F = ma
F = 0.145 x 1,104.5
F = 160.15 N.
The weight of the pitcher is calculated as;
W = mg
W = 84 x 9.8
W = 823.2 N
The force exerted on the baseball as a fraction of the pitcher's weight is calculated as follows;
n = 160.15/823.2 = 0.195
To know more about force, click the link given below:
brainly.com/question/13191643
#SPJ4
choose all that apply. ccd cameras are better astronomical detectors than the human eye because
CCD cameras are better astronomical detectors than the human eye for several reasons: their quantum efficiency is higher, they can observe at wavelengths beyond the visible and the integration time can be longer.
First, their quantum efficiency is higher, meaning they are able to detect a larger percentage of the photons that enter the camera. Second, they can observe at wavelengths beyond the visible, such as infrared and ultraviolet, which are not visible to the human eye. However, CCD cameras cannot turn photons into protons, as photons and protons are two different types of particles. Finally, the integration time of a CCD camera can be longer than the exposure time of the human eye, allowing for more photons to be detected and resulting in a better signal-to-noise ratio in the final image.
Learn more about human eye:
brainly.com/question/16834488
#SPJ4
Choose all that apply. CCD cameras are better astronomical detectors than the human eye because
Choose one or more:
A. their quantum efficiency is higher.
B. they can observe at wavelengths beyond the visible.
C. they can turn photons into protons.
D. the integration time can be longer.
Throughout the letter, king juxtaposes opposites to highlight tension between what is and what should be. Focusing on two examples, what points does he raise?.
The storyteller's discourse on Ignatius' appearance contrasts with his record of inward contemplations, highlighting the irregularity between his judgmental demeanor, sketchy garments, and prepping.
What is Ignatius?Except for what can be deduced internally from Ignatius' letters, nothing is known about his life outside of later (and occasionally false) traditions.Ignatius allegedly became a Christian at a young age. Ignatius and his associate Polycarp are recognised by tradition as being followers of John the Apostle.Ignatius was appointed Bishop of Antioch later in his life; according to the fourth-century Church historian Eusebius, Ignatius replaced Evodius.To know more about Ignatius, click the link given below:
brainly.com/question/18039370
#SPJ4
The complete question is: What points does King raise by juxtaposing opposites to highlight tension between what is and what should be?
How many watts of power does Jim's car use if it does 1675 joules of work in carrying a boat for 8.9 seconds?
Answer:
8.6
Explanation:
A student completes a PET experiment using chloroplasts from leaves lacking pigments that absorb in the 550 nm to 600 nm wavelength range. Which color of light should they avoid in their experiment if they want to measure activity at different wavelengths? Absorbance 360 760 460560660 Wavelength (nm) O Blue O Orange O Yellow O Red O Violet Light Absorption Spectrum of Spinach Extract
The student should avoid using yellow light if they want to measure activity at different wavelengths.
Yellow light should not be used since it lacks the pigment necessary to absorb wavelengths between 550 and 580 that will cause it to be completely ineffective.
Color Wavelength (nm)
Red 650 - 800
Orange 590 - 640
Yellow 550 - 580
Blue 460 - 480
Indigo 440 - 450
Violet 390 - 430
In physics, a periodic wave's wavelength is the length over which its form repeats. It is a characteristic of other spatial wave patterns as well as traveling and standing waves.
It is the separation between two consecutive positions on a wave that correspond to the same phase, such as two close-by crests, troughs, or zero crossings. The reciprocal of wavelength is the spatial frequency. Wavelength is usually denoted by the Greek letter lambda ().
learn more about wavelengths
brainly.com/question/19448078
#SPJ4