Under which set of conditions do real gases deviate the most from the ideal gas law?

Answer:An accompanying WMO report on greenhouse gas concentrations shows that 2015-2019 has seen a continued increase in carbon dioxide (CO2) levels and other key greenhouse gases in the atmosphere to new records, with CO2 growth rates nearly 20% higher than the previous five years.

Explanation:That's because the annual growth rate of atmospheric carbon dioxide has roughly tripled, from 0.6 ppm per year in the early 1960s to an average 2.1 ppm during the past 10 years. At Mauna Loa, carbon dioxide concentrations in 2015 jumped by 3.05 ppm

Answer:

What are three ways continents get bigger?

age of rocks.

fossils.

evidence of melting (subduction)

location on current continents.

glacial deposits.

Answer:

Melamine

Explanation:

The relationship between the volume, temperature, and pressure of the gas can be given by Charles law. The volume of the tire is 1.1 L.

According to Charles's law, the volume is directly proportional to the temperature of the gas at a constant pressure.

Charle's law can be shown as,

[tex]\rm \dfrac{V_{1}}{T_{1}} = \rm \dfrac{V_{2}}{T_{2}}[/tex]

Given,

Initial volume = 1.0 L

Initial temperature = 295 K

Final volume = ?

Final temperature = 325 K

Substituting values in the above equation the final volume can be calculated as:

[tex]\begin{aligned}\rm V_{2} &= \rm \dfrac{V_{1}T_{2}}{T_{1}}\\\\&= \dfrac{ 1 \times 325}{295}\\\\&= 1.1\;\rm L\end{aligned}[/tex]

Therefore, the final resulting volume of the tire is 1.1 L.

Learn more about Charle's law here:

https://brainly.com/question/26849359

Answer:

Explanation:

Answer:

The pH of a 4.4 M solution of boric acid is 4.3

Explanation:

at t=0  cM              0             0

at eqm                    

So dissociation constant will be:

Give c= 4.4 M and  = ?

Putting in the values we get:

Also

Thus pH of a 4.4 M  solution is 4.3

Answer:

no, food is not a fuel because it just give energy to do many activities but it will not provide any fuel only the dead and decaying material which berries under the soil then after a long years it becomes fossil fuel

Answer:

Explanation:using the ideal gas formula, calculate the volume of 1.5omoles of a gas at 115kPA and a temperature of 298k?

Answer:

solute dissolves in a solution

Answer:

solvent

Explanation:

because solvent are liquid that disolves

Owing to the fact that allene is not a planar molecule, the hydrogen atoms in the molecule do not lie on the same plane.

A planar molecule refers to those molecules that lie on same plane. This means that the atoms in the molecules are all arranged along the same plane.

Now we know that the molecule allene is not a planar molecule. Owing to the fact that allene is not a planar molecule, the hydrogen atoms in the molecule do not lie on the same plane. All the carbon atoms present are sp2 hybridized.

Learn more about planar molecules: https://brainly.com/question/14019685?

Answer: Calcium

Hope this helps

Answer: here's the answer to your question

1.3 ×10¹ is the average reaction rate for O[tex]_2[/tex] in this reaction N2(g) + O2(g) ⟶ 2NO(g).

What is rate of reaction?

The pace during which a chemical response takes place is known as the reaction rate and rate of reaction. It is proportional to the rise in product concentration per unit time and the fall in reactant concentration per unit time. Response times can differ wildly.

For instance, cellulose burns in a fire in a matter of seconds as opposed to the sluggish, years-long oxidative corrosion of iron that occurs under Earth's atmosphere. For the majority of reactions, the rate gets slower as it goes along. By tracking the concentration changes over time, one can calculate the pace of a reaction.

concentration of N[tex]_2[/tex] =0.34/0.75=0.45M

concentration of O[tex]_2[/tex] =0.34/0.75=0.45M

concentration of NO=1.2/0.75=1.6

Kc = [NO]²/ [ N[tex]_2[/tex] ] × [ O[tex]_2[/tex] ]

    =  [0.45]²/ [ 0.45 ] × [ 1.6 ]

    = 1.3 ×10¹

Therefore, 1.3 ×10¹ is the reaction rate.

To know more about rate of reaction, here:

https://brainly.com/question/8592296

#SPJ3

Answer:

1. mechanical energy

2. Kinetic energy

3. Energy

4. Work

5. potential energy

Explanation:

1. The total amount of mechanical energy is merely the sum of the potential energy and the kinetic energy. This sum is simply referred to as the total mechanical energy 
2. All moving objects have kinetic energy. When an object is in motion, it changes its position by moving in a direction: up, down, forward, or backward.

3. Energy is defined as the ability to cause changes in matter. You can change energy from one form to another when you lift your arm or take a step. In each case, energy is used to move matter — you. The energy of moving matter is called kinetic energy.

4. transfer of energy that occurs when a force makes an object move. For work to occur, an object must move. The motion of the object must be in the same direction as the applied force on the object.

5. potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.

Answer:

b

Explanation:

many solids are crystalline hence a is eliminated

graphite contains free electrons while diamond uses all electrons in bonding and many substances have that property hence c is eliminated

only substances made up of carbon produce carbondioxide as the product when burnt

Based on the energy usage shown by the graph, the best option for the chemical change represented is the combustion of iron.

The combustion of iron in oxygen leads to the formation of Iron (III) oxide in solid form.

For the combustion of iron to happen, a lot of heat has to be applied to the iron which is why the potential energy of reactants is high. As the reaction progresses, the energy needed reduces as iron (III) oxide is formed.

Find out more on Iron (III) oxide at https://brainly.com/question/11885810.

Answer:

condenses

Explanation:

change or cause to change from a gas or vapor to a liquid.

The buret should be conditioned before loading it with the titrant.

This is defined as laboratory apparatus which is used in quantitative chemical analysis to measure the volume of a liquid or a gas.

It should be conditioned with the titrant solution to prevent dilution from occurring as a result of cleaning it with water.

Read more about Buret here https://brainly.com/question/16996786

Paul J. Chirik developed methods associated with chemistry catalysis and transition metals, which may result useful for the development of manufacturing technologies.

Catalysis refers to the chemical processes that increase the rate of different types of reactions by lowering its activation energy.

Proteins (enzymes) are biological catalysts that increase the rate of chemical reactions in biological systems.

Catalysis may be reached by using transition metals (e.g., actinium and rutherfordium), which result useful in the development of manufacturing technologies.

Learn more about catalysis here:

https://brainly.com/question/12507566

Answer:

it's is math that you can answer with your sister and your mother

Answer:

346 degrees because 326+20= 346

Answer:

khate ko ban randi ko ban

D. Water

Answer:

Explanation:

the answer is 8.66


Mark me brainliest please.

The pH of the solution formed by mixing 25. 0 ml of a 0. 15 m solution of NH₃ with 25. 0 ml of 0. 12 m HCl is 8.66.

pH is potential hydrogen. It is the measurement of the acidity and basicity of any solution.

The solution of NH₃ is 25. 0 ml of a 0. 15 m

The solution of HCl is 25. 0 ml of 0. 12 m hcl

The pkb value is [tex]1.8 \times 10^-^5[/tex]

Putting the value in the formula

[tex]pOH=pKb +log[NH_3][HCl]\\\\ pOH = 1.8 \times 10^-^5+ log \dfrac{25.0 \times 0.15}{ 25.0 \times 0.12} \\\\ pOH = 1.8\times10^-^5+ log1.25 \\\\pOH = 1.8\times 10^-^5 + 1.25 = 3.05\\\\ pH = 14 - pOH = 14 - 1.25 = 8.66[/tex]

Thus, the pH of the solution formed by mixing 25. 0 ml of a 0. 15 m solution of NH₃ with 25. 0 ml of 0. 12 m HCl is 8.66.

Learn more about pH

https://brainly.com/question/15289741

#SPJ4

Answer:

2.1×6.02×1023÷ 14

9.03×1022 atom of nitrogen

Explanation:

The use of ethanol instead of acetic acid is not the wise choice.

When you are out of acetic acid and decide to use ethanol as the solvent in the transformation, it would not be a wise choice because acetic acid and ethanol are two totally different chemicals. Due to different in features, it can't act the same and the desirable results can't be observed.

So we can conclude that use of ethanol instead of acetic acid is not the wise choice.

Learn more about solvent here: https://brainly.com/question/25326161

To use ethanol in place of acetic acid as a solvent in the transformation of 3 into 4, is not a wise choice.

Functional groups are the specific groups which after attaching to any molecule changes the property of the molecule.

Acetic acid has carboxylic (-COOH) group as functional group and ethanol has hydroxyl (-OH) functional group and both has different properties from each other. So use to ethanol in place of acetic acid is not correct as it will not fulfill the requirements of acid.

Hence use of ethanol in place of acetic acid is not a wise choice.

To know more about functional groups, visit he below link:
https://brainly.com/question/6028840

#SPJ4

Answer:

Diffraction involves a change in direction of waves as they pass through an opening or around a barrier in their path.

Reflection involves a change in direction of waves when they bounce off a barrier; refraction of waves involves a change in the direction of waves as they pass from one medium to another

Explanation:

If we use water waves as an example, waves hitting shallower water at an angle will slow down and change direction slightly. That is refraction

Waves hitting an island will bend and eventually close in on the "shadow" of the island. That is diffraction

The number of moles of air present is 0.056 mole

The ideal gas is one in which molecules do not attract or repel each other.Many gases like oxygen,nitrogen, carbon di oxide can be treated as the ideal gases as particular temperature and pressure.The real gases at high temperature and lower pressure can be treated as ideal gases.

The given data in the question is

Volume = 1.35 L

Pressure (P) = 750 torr

Temperature (T) = 17 °C = 17 + 273 = 290 K

Gas constant (R) = 62.396 L•torr/mol•K

The number of moles (n) =?

How to determine the number of moles:

The number of moles present can be obtained by using the ideal gas equation as illustrated below:

[tex]PV=nRT[/tex]

Divide both sides by RT

[tex]n=\dfrac{PV}{RT}[/tex]

[tex]n=\dfrac{(750\times 1.350}{62.396\times 290)}[/tex]

[tex]n=0.056\ moles[/tex]

Hence, the number of moles of air present is 0.056 mole

To learn more about the ideal gas equation follow

brainly.com/question/4147359

Answer:

answer in picture

Explanation:

Answer:

Any time a simple metal reacts with an acid it is a single displacement reaction.

Explanation:

Aldol condensation involves  two aldehydes or two ketones or an aldehyde and a ketone. The product of the reaction is shown in the image attached.

Aldol condensation is a reaction that involves two aldehydes or two ketones or an aldehyde and a ketone. This reaction occurs at the carbonyl group as one of the carbonyl compounds is in the enolate form.

The product of the reaction is shown in the image attached. This gives the mechanism for the Aldol condensation of the compound 3‑methylbutanal.

Learn more about aldol condensation: https://brainly.com/question/9415260

The resulting volume of the tire would be 1.1 L

According to this law, the volume of a given gas is directly proportional to its temperature, provided that the pressure remains constant.

The law can be presented mathematically as;  

[tex]\dfrac{V_1}{T_1} =\dfrac{V_2}{T_2}[/tex]

In this case, V1 = 1.0 L, T1 = 22 °C (295 K), T2 = 52 °C (325 K).

[tex]V_2=\dfrac{V_1T_2}{T_1}[/tex]V

[tex]V_2=\dfrac{1\times 325}{295}=1.1\ L[/tex]

Hence the final volume of the tire will be 1.1 L

More on Charles's law can be found here:

brainly.com/question/3491421