1. Graph is attached below. 2. 0.51 3. the percent of tiles with an area between 15.975 and 16.01 square inches is 82.78%. 4. 0.08% 5. 304 tiles 6. 0.4938x tiles.
Describe uniform density function?A uniform density function is a type of probability distribution that assigns equal probability to all values within a specified range. It is also known as a rectangular distribution because the graph of the probability density function appears as a rectangle with a constant height over the interval of possible values.
The probability density function of a uniform distribution is defined by two parameters: a minimum value (a) and a maximum value (b). The function assigns a probability of 1/(b-a) to each value within the range [a, b], and a probability of 0 to any value outside this range.
1. The graph of the uniform density function that takes on values from -2 to 3 is mentioned below
2. To find P(-1.25 < X < 1.3), we need to find the area under the uniform density function between -1.25 and 1.3. Since the density function is uniform, the area is simply the rectangle with base (1.3 - (-1.25)) = 2.55 and height 1/5 (since the range of values is 5). Therefore,
P(-1.25 < X < 1.3) = (2.55 * 1/5) = 0.51
3. To find the percent of tiles that have an area between 15.975 and 16.01 square inches, we need to standardize the values using the z-score formula and then find the area under the normal curve between those two values:
z1 = (15.975 - 16) / 0.008 = -3.125
z2 = (16.01 - 16) / 0.008 = 1.25
Using a standard normal table or calculator, we find the area between these two z-scores to be approximately 0.8278.
Therefore, the percent of tiles with an area between 15.975 and 16.01 square inches is 82.78%.
4. To find the probability that a tile will have an area that is more than 16.025 square inches, we again need to standardize the value using the z-score formula and then find the area under the normal curve to the right of that value:
z = (16.025 - 16) / 0.008 = 3.125
Using a standard normal table or calculator, we find the area to the right of this z-score to be approximately 0.0008.
Therefore, the probability that a tile will have an area that is more than 16.025 square inches is 0.08%.
i. Yes, this is unusual because the probability is very low, indicating that it is highly unlikely for a tile to have an area greater than 16.025 square inches.
5. To find the number of tiles that can be expected to have a surface area less than 15.985 square inches, we first need to standardize the value using the z-score formula:
z = (15.985 - 16) / 0.008 = -1.875
Using a standard normal table or calculator, we find the probability to the left of this z-score to be approximately 0.0304.
Therefore, out of 10,000 tiles, we can expect approximately 0.0304 * 10,000 = 304 tiles to have a surface area less than 15.985 square inches.
6. To find the number of tiles that must be produced to ensure that the manufacturer has 70,000 tiles that are between 15.98 and 16.02 square inches, we need to find the z-scores for the lower and upper bounds of this range:
z1 = (15.98 - 16) / 0.008 = -2.5
z2 = (16.02 - 16) / 0.008 = 2.5
Using a standard normal table or calculator, we find the probability between these two z-scores to be approximately 0.4938.
Therefore, out of x tiles, we can expect approximately 0.4938x tiles to have a surface area between 15.
To know more about range visit:
https://brainly.com/question/15049485
#SPJ1
1. The graph of the uniform density function that takes on values from -2 to 3 is attached below.
2. P(-1.25 < X < 1.3) = (2.55 * 1/5) = 0.51
3. The percent of tiles with an area between 15.975 and 16.01 square inches is 82.78%.
4. The probability that a tile will have an area that is more than 16.025 square inches 0.08%.
5. Number of tiles that can be expected to have a surface area less than 15.985 square inches
6. To find the number of tiles that must be produced to ensure that the manufacturer has 70,000 tiles that are between 15.98 and 16.02 square inches, 0.4938x tiles.
Describe uniform density function?A uniform density function is a type of probability distribution that assigns equal probability to all values within a specified range. It is also known as a rectangular distribution because the graph of the probability density function appears as a rectangle with a constant height over the interval of possible values.
1. The graph of the uniform density function that takes on values from -2 to 3 is mentioned below:
2. To find P(-1.25 < X < 1.3), we need to find the area under the uniform density function between -1.25 and 1.3. Since the density function is uniform, the area is simply the rectangle with base (1.3 - (-1.25)) = 2.55 and height 1/5 (since the range of values is 5). Therefore,
P(-1.25 < X < 1.3) = (2.55 * 1/5) = 0.51
3. To find the percent of tiles that have an area between 15.975 and 16.01 square inches, we need to standardize the values using the z-score formula and then find the area under the normal curve between those two values:
z1 = (15.975 - 16) / 0.008 = -3.125
z2 = (16.01 - 16) / 0.008 = 1.25
Using a standard normal table or calculator, we find the area between these two z-scores to be approximately 0.8278.
Therefore, the percent of tiles with an area between 15.975 and 16.01 square inches is 82.78%.
4. To find the probability that a tile will have an area that is more than 16.025 square inches, we again need to standardize the value using the z-score formula and then find the area under the normal curve to the right of that value: z = (16.025 - 16) / 0.008 = 3.125
Using a standard normal table or calculator, we find the area to the right of this z-score to be approximately 0.0008.
Therefore, the probability that a tile will have an area that is more than 16.025 square inches is 0.08%. Yes, this is unusual because the probability is very low, indicating that it is highly unlikely for a tile to have an area greater than 16.025 square inches.
5. To find the number of tiles that can be expected to have a surface area less than 15.985 square inches, we first need to standardize the value using the z-score formula:
z = (15.985 - 16) / 0.008 = -1.875
Using a standard normal table or calculator, we find the probability to the left of this z-score to be approximately 0.0304.
Therefore, out of 10,000 tiles, we can expect approximately 0.0304 * 10,000 = 304 tiles to have a surface area less than 15.985 square inches.
6. To find the number of tiles that must be produced to ensure that the manufacturer has 70,000 tiles that are between 15.98 and 16.02 square inches, we need to find the z-scores for the lower and upper bounds of this range:
z1 = (15.98 - 16) / 0.008 = -2.5
z2 = (16.02 - 16) / 0.008 = 2.5
Using a standard normal table or calculator, we find the probability between these two z-scores to be approximately 0.4938.
Therefore, out of x tiles, we can expect approximately 0.4938x tiles to have a surface area between 15.
To know more about range visit:
https://brainly.com/question/15049485
#SPJ1
Determine which points lie on the line L whose parametric or normal form is given. Circle all that afpjply: (c)L(x0,v) where x0 = 132 and v= −211 (5,1,0)(5,1,1)(1,3,2)
The points that lie on the line L with parametric form L(t) = (1, 3, 2) + t(-2, 1, -1) are (1, 3, 2), (-1, 4, 1), and (-3, 5, 0). So, the correct answer is C).
The parametric form of the line L can be written as:
L(t) = x0 + tv
where x0 = (1, 3, 2) and v = (-2, 1, -1)
To find which points lie on the line L, we can substitute different values of t into the parametric equation and see which points we get.
For t = 0, we have:
L(0) = x0 + 0v = (1, 3, 2) + 0(-2, 1, -1) = (1, 3, 2)
For t = 1, we have:
L(1) = x0 + 1v = (1, 3, 2) + (-2, 1, -1) = (-1, 4, 1)
For t = 2, we have:
L(2) = x0 + 2v = (1, 3, 2) + 2(-2, 1, -1) = (-3, 5, 0)
So the points that lie on the line L are (1, 3, 2), (-1, 4, 1), and (-3, 5, 0). So, the correct option is C).
To know more about parametric form:
https://brainly.com/question/29146759
#SPJ4
ges saved
1. A rock is dropped from a height of 100 feet. Calculate the time between when the rock was dropped and when it landed. If we choose "down" as positive and ignore air friction, the function is
h(t)=25²-81.
O t=3.24 seconds
O t=9 seconds
O t=1.8 seconds
O t=6.48 seconds
Answer: t = 1.8 seconds
Step-by-step explanation:
The function h(t) = 25t^2 - 81 gives the height of the rock (in feet) at time t seconds after it was dropped.
When the rock lands, its height is 0. So we can set h(t) = 0 and solve for t:
25t^2 - 81 = 0
Solving for t, we get:
t = ±√(81/25) = ±(9/5)
Since we are only interested in the time after the rock was dropped, we take the positive value:
t = 9/5 = 1.8 seconds
Therefore, the time between when the rock was dropped and when it landed is 1.8 seconds.
So the answer is: t = 1.8 seconds
7. Hal records the numbers of winners
of a contest in which the player
chooses a marble from a bag.
DA G
Game 1
Game 2
Game 3
Number of Number of
Players
Winners
123
52
155
63
172
65
Based on the data for all three
games, what is the experimental
probability of winning the contest?
Express the answer as a decimal.
Answer:0.40
Step-by-step explanation:
the experimental probability of winning the contest is 0.4 or 40%.
Define probabilityProbability is a measure of the likelihood or chance of an event occurring. It is a number between 0 and 1, where 0 denotes the impossibility of the occurrence and 1 denotes its certainty. An occurrence is more likely to occur the higher its probability.
Players: 123 + 155 + 172, or 450 total
52 plus 63 plus 65 winners make up the total of 180.
Experimental probability of winning the contest = Total number of winners / Total number of players
Experimental probability of winning the contest = 180 / 450 = 0.4
Hence, the experimental probability of winning the contest is 0.4 or 40%
To know more about occurrence, visit:
https://brainly.com/question/28953812
#SPJ1
Jonathan says that the function represented by the graph is always decreasing. Is he correct? fI not, where is the function decreasing?
Explain your reasoning.
If the slope of the graph is increasing from positive x-axis to negative x-axis, then the function is not that decreasing. Therefore, Jonathan's statement is incorrect.
What is the graph function about?The function is decreasing on intervals where the slope is negative. In this case, since the slope is increasing from positive x-axis to negative x-axis, the function is decreasing on the interval where x is negative.
To determine this interval more precisely, we would need to find the x-value(s) where the slope changes sign from positive to negative. These x-values correspond to critical points, such as local maximums or minimums. The function is decreasing before a local maximum and after a local minimum.
Therefore, Jonathan's statement is not correct, and the function represented by the graph is decreasing on the interval where x is negative.
Learn more about graph function from
https://brainly.com/question/24335034
brainly.com/question/26676087
#SPJ1
Below is some output from the regression on the furniture factory data. What does the R-square value tell us?That we cannot reject the null hypothesis
That there is multicollinearity between the independent variables
That on average, 0.7059 more chairs are produced during weekday shifts than during weekend shifts.
That 71% of the variability in the number of chairs produced can be explained by whether the shift is in the morning or evening and whether it is a weekday shift or weekend shift.
The R-square value informs us that whether the shift is in the morning or the evening and whether it is a weekday shift or weekend shift may account for 71% of the variability in the number of chairs generated.
The R-square statistic measures how much of the variance in the dependent variable in a regression model is accounted for by the independent variables. A better fit of the model to the data is indicated by higher values, which range from 0 to 1.
A value of 0 indicates that no variation is explained by the independent variables, while a value of 1 indicates that all variation in the dependent variable is explained by the independent factors.
Learn more about R-square value at
https://brainly.com/question/30260338
#SPJ4
Using a standard deck of cards, a gamer drew one card and recorded its value. They continued this for a total of 100 draws. The table shows the frequency of each card drawn.
Card A 2 3 4 5 6 7 8 9 10 JQK
Frequency 4 7 5 6 7 6 8 10 7 10 8 12 10
Based on the table, what is the experimental probability that the card selected was a K or 6?
The experimental probability that the card selected was a K or 6 is 17/100 or 0.17.
What is probability?
Probability is a measure of the likelihood or chance of an event occurring. It is expressed as a number between 0 and 1, where 0 indicates that an event is impossible and 1 indicates that it is certain. The probability of an event can be calculated by dividing the number of favorable outcomes by the total number of possible outcomes. In other words, it is the ratio of the number of desired outcomes to the total number of outcomes.
The frequency of card 6 is 7 and the frequency of card K is 12. However, the card K is also counted in the total count for JQK, so we need to subtract 2 from the frequency of K to get the actual count of K.
Actual count of K = 12 - 2 = 10
Total count of 6 and K = 7 + 10 = 17
The experimental probability of drawing a K or 6 is the frequency of drawing K or 6 divided by the total number of draws:
Experimental probability = (frequency of K or 6) / (total number of draws)
Experimental probability = 17 / 100
Therefore, the experimental probability that the card selected was a K or 6 is 17/100 or 0.17.
To know more about probability and given link below -
https://brainly.com/question/11234923
#SPJ1
Fredericka Smith's account statement. Unpaid balance of $75.06. Periodic rate of 2 percent. What is the finance charge? New purchases of $432.11. What is the new balance?
Answer:
Step-by-step explanation:
$75.06×2%=$75.06×0.02=$1.50
The finance charge is the product of the unpaid balance and the periodic rate.
What would the slope of X -2, -1, 0, 1, 2. Y -12, -7, -2, 3, 8.
Answer:
slope = 5
slope = (y2 - y1) / (x2 - x1)
Using this formula, calculate the slope between pairs of points in the given set of data. For example, the slope between the first two points (-2, -12) and (-1, -7) is:
slope = (-7 - (-12)) / (-1 - (-2)) = 5 / 1 = 5
Calculate the slope between each pair of points as follows:
Between (-2,-12) and (-1,-7): slope = 5
Between (-1,-7) and (0,-2): slope = 5
Between (0,-2) and (1,3): slope = 5
Between (1,3) and (2,8): slope = 5
Part A
Use GeoGebra to graph points A, B, and C to the locations shown by the ordered pairs in the table. Then join each pair of
points using the segment tool. Record the length of each side and the measure of each angle for the resulting triangle.
Location
A(3,4), B(1,1).
C(5.1)
A(4.5), B(2.1).
C(7.3)
—————-
AB=
BC=
AC=
Answer:
Step-by-step explanation:
Answer:
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&AB&BC&AC\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&3.61&4&3.61\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&4.47&5.39&3.61\\\cline{1-4}\end{array}[/tex]
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&m \angle A&m \angle B&m \angle C\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&67.38^{\circ}&56.31^{\circ}&56.31^{\circ}\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&82.87^{\circ}&41.63^{\circ}&55.49^{\circ}\\\cline{1-4}\end{array}[/tex]
Step-by-step explanation:
Step 1Place points A, B and C on the coordinate grid.
Alternatively, type the following into the input field as 3 separate inputs:
Triangle 1
A = (3, 4)B = (1, 1)C = (5, 1)Triangle 2
A = (4, 5)B = (2, 1)C = (7, 3)Step 2Use the Segment tool to join each pair of points.
Alternatively, type Segment( <Point>, <Point> ) into the input field (replacing <Point> with the letter name of the point) to create a segment between two points.
Record the length of each side.
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&AB&BC&AC\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&3.61&4&3.61\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&4.47&5.39&3.61\\\cline{1-4}\end{array}[/tex]
Step 3Use the Angle tool to measure each angle in the resulting triangle.
Alternatively, type Angle(Polygon(A, B, C)) into the input field to create all interior angles.
Record the measure of each angle.
[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\sf Location&m \angle A&m \angle B&m \angle C\\\cline{1-4}\vphantom{\dfrac12} A(3,4),\;B(1,1),\;C(5,1)&67.38^{\circ}&56.31^{\circ}&56.31^{\circ}\\\cline{1-4}\vphantom{\dfrac12} A(4,5),\;B(2,1),\;C(7,3)&82.87^{\circ}&41.63^{\circ}&55.49^{\circ}\\\cline{1-4}\end{array}[/tex]
Note: All measurements have been given to the nearest hundredth (2 decimal places).
Estimate the product. Then find each product 3/4 8 1/2
PLEASE HELP
The product of the number 3/4 and 8 1/2 is 51/8.
What is mixed fraction and improper fraction?A mixed number is one that has a fraction and a whole number, separated by a space. An example of a mixed number is 8 1/2. Contrarily, an improper fraction is one in which the numerator exceeds or is equal to the denominator. For instance, 17/2 is a bad fraction. An improper fraction is a fraction in which the numerator is more than or equal to the denominator, as opposed to a mixed number, which combines a whole number with a proper fraction.
The given numbers are 3/4 and 8 1/2.
Convert the mixed number to an improper fraction:
8 1/2 = (8 x 2 + 1) / 2 = 17/2
Then, we can multiply the fractions:
3/4 x 17/2 = (3 x 17) / (4 x 2) = 51/8
Hence, the product of 3/4 and 8 1/2 is 51/8.
Learn more about improper fraction here:
https://brainly.com/question/21449807
#SPJ1
Find x, if √x +2y^2 = 15 and √4x - 4y^2=6
pls help soon
Step 1: Rearrange the equation √x +2y^2 = 15 to get x = (15 - 2y^2)^2.
Step 2: Substitute x = (15 - 2y^2)^2 in the equation √4x - 4y^2=6.
Step 3: Simplify the equation to get 4(15 - 2y^2)^2 - 4y^2 = 6.
Step 4: Solve for y^2 by rearranging the equation to get y^2 = (6 + 4(15 - 2y^2)^2)/8.
Step 5: Substitute y^2 = (6 + 4(15 - 2y^2)^2)/8 in the equation x = (15 - 2y^2)^2.
Step 6: Solve for x by rearranging the equation to get x = (15 - (6 + 4(15 - 2y^2)^2)/4)^2.
Step 7: Substitute y^2 = (6 + 4(15 - 2y^2)^2)/8 in the equation x = (15 - (6 + 4(15 - 2y^2)^2)/4)^2.
Step 8: Simplify the equation to get x = (15 - (6 + 60 - 8y^
The cost white in dollars for X pounds of deli meat is represented by the equation Y equals 3.5 X graph the equation and interpret the slope
The graph is of the given equation is represented in the figure below.
Define the term graph?The visual representation of mathematical functions or data points on a Cartesian coordinate system is an x-y axis graphic.
By dividing the price change by the fluctuation in the amount of deli meat, one may calculate the slope. The magnitude indicates that the price per pound of deli meat has changed by 3.5 units.
Given linear equation represents the cost measured in dollars, as a function of the amount of deli meat, measured in pounds:
[tex]y = 3.5x[/tex]
The graph is of that linear equation as plotted below diagram.
By dividing the price change by the fluctuation in the amount of deli meat, one may calculate the slope. The magnitude denotes a change in the price per pound of deli meat of 3.5 units.
To know more about graph equation, visit:
https://brainly.com/question/29464771
#SPJ1
The graph is of the given equation is represented in the figure below linear line: Y = 3.5x
Define the term graph?The visual representation of mathematical functions or data points on a Cartesian coordinate system is an x-y axis graphic.
By dividing the price change by the fluctuation in the amount of deli meat, one may calculate the slope. The magnitude indicates that the price per pound of deli meat has changed by 3.5 units.
Given linear equation represents the cost measured in dollars, as a function of the amount of deli meat, measured in pounds:
Linear line: Y = 3.5x
The graph is of that linear equation as plotted below diagram.
By dividing the price change by the fluctuation in the amount of deli meat, one may calculate the slope. The magnitude denotes a change in the price per pound of deli meat of 3.5 units.
To know more about graph equation, visit:
brainly.com/question/29464771
#SPJ1
i have a reed. i know not its length. i broke from it one cubit and it fit 60times along the length of my field. i restored to the reed what i had broken off and it fit 30 times alone the wifth of my Field. the area of my field is 375 square nindas. what was the original length of the reed? 1nandas:12cubits
The original length of the reed is 3.83 nindas which can be calculated by using the information given in the question.
What is area?Area is a two-dimensional measurement of a surface or space. It is a measure of how much space is occupied by a two-dimensional object or surface. The area of a shape is determined by multiplying the length and width of the shape together.
Firstly, we need to calculate the width of the field. As the reed fits 30 times along the width, this implies that the width of the field is 30 times the length of the reed. Therefore, the width of the field is 30 x length of the reed.
Now, we need to calculate the area of the field. As the area of the field is given as 375 nindas², this implies that the area of the field is equal to 375 nindas².
We can substitute the width of the field (30 x length of the reed) into the equation for the area of the field, to yield: 375 nindas² = (30 x length of the reed) x length of the reed.
Solving for length of the reed, we get: length of the reed = (375/30)1/2 = 3.83 nindas.
Therefore, the original length of the reed is 3.83 nindas.
For more questions related to length
https://brainly.com/question/28108430
#SPJ1
Dish A had cells with a radius of 5.1 x10-10 cm. Dish B had cells that had a radius of 4.1 x 10-8 cm. What is the sum of the radii of the two types of cells, using scientific notation?
Answer:
Step-by-step explanation:
To find the sum of the radii of the two types of cells in scientific notation, we need to add the two radii together. However, the radii are given in different orders of magnitude (exponents), so we need to convert one of the radii to match the order of magnitude of the other radius.
The radius of dish A cells is 5.1 x 10^-10 cm.
The radius of dish B cells is 4.1 x 10^-8 cm.
We can convert the radius of dish A cells to match the order of magnitude of dish B cells by multiplying it by 100 (10^2), which gives us:
5.1 x 10^-10 cm x 10^2 = 5.1 x 10^-8 cm
Now that both radii have the same order of magnitude (10^-8), we can add them together to get the total sum of the radii:
5.1 x 10^-8 cm + 4.1 x 10^-8 cm = 9.2 x 10^-8 cm
Therefore, the sum of the radii of the two types of cells, in scientific notation, is 9.2 x 10^-8 cm.
Answer:9.2 x 10^-8 cm.
Step-by-step explanation:
In △ △ ABC, CJ = 18. If CG = BG, what is KJ? Triangle A B C is divided by 4 segments. A H is the height. C J extends from C to side A B. B I extends from B to side A C. H I extends from the height on B C to I on A C. C J and B I intersect at point K. A J and B J are congruent. A I and C I are congruent.
Solving for CI in terms of the given lengths, we get: [tex]Cl=\frac{\sqrt{BG^{2} -IM^{2} } }{\sqrt{2} }[/tex]
Substituting this expression for CI and the given value for CG into the expression for BI, we get: [tex]BI=CG-\frac{\sqrt{BG^{2} -IM^{2} } }{\sqrt{2} }[/tex].
What is triangle?A triangle is a three-sided polygon, which is a closed two-dimensional shape with straight sides. In a triangle, the three sides connect three vertices, or corners, and the angles formed by these sides are called the interior angles of the triangle. The sum of the interior angles of a triangle is always 180 degrees. Triangles can be classified by their side lengths and angle measurements. For example, an equilateral triangle has three sides of equal length, and all of its angles are 60 degrees; an isosceles triangle has two sides of equal length, and its base angles are also equal; a scalene triangle has three sides of different lengths, and all of its angles are also different. Triangles are a fundamental shape in mathematics and geometry, and they have numerous applications in fields such as architecture, engineering, physics, and more.
Given by the question.
Based on the given information, we can start by drawing a diagram of triangle ABC and the segments AH, BJ, CI, CJ, and BI as described.
Since CG = BG, we can draw the perpendicular bisector of side AC passing through point G, which will intersect side AB at its midpoint M.
Now, we can see that triangle CGB is isosceles with CG = BG, so the perpendicular bisector of side CB also passes through point G. This means that G is the circumcenter of triangle ABC, and therefore, the distance from G to any vertex of the triangle is equal to the radius of the circumcircle.
Next, we can use the fact that AJ and BJ are congruent to draw the altitude from point J to side AB, which we will call JN. Similarly, we can draw the altitude from point I to side BC, which we will call IM.
Since AJ and BJ are congruent, the altitude JN will also be the perpendicular bisector of side AB, so it will pass through point M. Similarly, the altitude IM will pass through point G, which is the circumcenter of triangle ABC.
Now, we can use the Pythagorean theorem to find the lengths of JN and IM in terms of the given lengths:
[tex]JN^{2}= AJ^{2} -AN^{2} \\ = ( AH+HN)^{2} - AN^{2} \\=AH^{2} +2AH*HN+HN^{2}-AN^{2} \\[/tex]
[tex]IM^{2}= CI^{2} -CM^{2} \\=( CG-GM)^{2} -CM^{2} \\CG^{2}-2CG*GM+GM^{2} -CM^{2}[/tex]
Since CG = BG and GM = BM (since M is the midpoint of AB), we can simplify the expression for IM^2 as follows:
[tex]IM^{2}[/tex] = [tex]BG^{2}[/tex] - 2BG * BM + [tex]BM^{2}[/tex] - [tex]CM^{2}[/tex]
= [tex]BG^{2}[/tex] - [tex]BM^{2}[/tex] - [tex]CM^{2}[/tex]
Now, we can use the fact that BJ and CI intersect at point K to find the length of KJ:
KJ = BJ - BJ * (CK/CI)
= BJ * (1 - CK/CI)
= BJ * (1 - BM/CM)
To find BM/CM, we can use the fact that triangle BCI is isosceles with BI = CI, so the altitude IM is also a median of the triangle. This means that CM = 2/3 * BI. Similarly, we can find BJ in terms of JN using the fact that triangle ABJ is isosceles with AJ = BJ:
BJ = 2 * JN
Substituting these expressions into the equation for KJ, we get:
KJ = 2 * JN * (1 - 2/3 * BI/CM)
Now, we just need to find BI/CM in terms of the given lengths. Using the fact that triangle BCI is isosceles with BI = CI, we can find BI in terms of CG:
BI = CG - CI
Substituting this expression into the equation for [tex]IM^{2}[/tex]and simplifying, we get:
[tex]IM^{2}[/tex] =[tex]BG^{2}[/tex] - CG * CI
To learn more about Pythagorean theorem:
https://brainly.com/question/28361847
#SPJ1
A photography student took portrait photos of people from his hometown. He wants to
develop 21 of the photos, 9 of which were photos of babies.
If he randomly chooses to make 4 of the photos black and white, what is the probability that
all of them are of babies?
Answer: The total number of ways the photography student can choose 4 photos out of 21 is given by the combination formula:
Step-by-step explanation: C(21, 4) = (21!)/((4!)(21-4)!) = 5985
Out of the 21 photos, 9 were photos of babies. The number of ways the student can choose 4 baby photos out of 9 is given by:
C(9, 4) = (9!)/((4!)(9-4)!) = 126
Therefore, the probability that all 4 photos chosen are of babies is:
P = (number of ways to choose 4 baby photos)/(total number of ways to choose 4 photos)
P = C(9, 4)/C(21, 4)
P = 126/5985
P ≈ 0.021
So, the probability that all 4 photos chosen are of babies is approximately 0.021 or 2.1%.
The Ford F-150 is the best selling truck in the United States.
The average gas tank for this vehicle is 23 gallons. On a long
highway trip, gas is used at a rate of about 3.2 gallons per hour.
The gallons of gas g in the vehicle's tank can be modeled by the
equation g(t)=23 -3.2t where t is the time (in hours).
a) Identify the domain and range of the function. Then graph
the function.
b) At the end of the trip there are 6.4 gallons left. How long
was the trip?
a) The domain of the function is [0, 7.1875], while the range is [0,23]. Considering the domain and the range, the graph of the function is given by the image presented at the end of the answer.
b) The trip had a duration of 5.1875 hours.
How to obtain the domain and the range of the function?The function for this problem is defined as follows:
g(t) = 23 - 3.2t.
The domain is the set of input values that can be assumed by the function. The time cannot have negative measures, hence the lower bound of the domain is of zero, while the gas cannot be negative, hence the upper bound of the domain is given as follows:
23 - 3.2t = 0
3.2t = 23
t = 23/3.2
t = 7.1875 hours.
The range is given by the set of all output values assumed the function, which are the values of the gas, hence it is [0,23].
The graph is a linear function between points (0, 23) and (7.1875, 0).
At the end of the trip there were 6.4 gallons left, hence the length of the trip is obtained as follows:
23 - 3.2t = 6.4
t = (23 - 6.4)/3.2
t = 5.1875 hours.
More can be learned about linear functions at brainly.com/question/24808124
#SPJ1
Michelle and Robert constructed a wooden bridge for ATVs over a deep creek on the edge of their property. To recuperate the cost of the materials, they decided to charge an annual toll of $8 to each of the 120 members of a local club. A survey showed that for every $1 the toll is increased, 4 members wouldn't use the bridge anymore. What is the best toll charge to allow them to recuperate the cost of the materials the fastest?
Answer:
the answer is $10
Step-by-step explanation:
trust that
Q6) The diagram shows a pyramid. The apex of the pyramid is V.
Each of the sloping edges is of length 6 cm.
A
6 cm
2 cm
B
2 cm с
F
6 cm
The base of the pyramid is a regular hexagon with sides of length 2 cm.
O is the centre of the base.
B
2 cm
E
2 cm C
Calculate the height of V above the base of the pyramid.
Give your answer correct to 3 significant figures.
V is 5.92 centimetres above the pyramid's base at its highest point.
What is pyramid?A pyramid is a 3D pοlyhedrοn with the base οf a pοlygοn alοng with three οr mοre triangle-shaped faces that meet at a pοint abοve the base. The triangular sides are called faces and the pοint abοve the base is called the apex. A pyramid is made by cοnnecting the base tο the apex. Sοmetimes, the triangular sides are alsο called lateral faces tο distinguish them frοm the base. In a pyramid, each edge οf the base is cοnnected tο the apex that fοrms the triangular face.
Give the altitude the letter h. Next, we have:
tan(60) = h/2
Simplifying, we get:
h = 2 tan(60) = 2 √(3)
The Pythagorean theorem yields the following:
[tex]$\begin{align}{{V O^{2}+O F^{2}=V F^{2}}}\\ {{V O^{2}+1^{2}=6^{2}}}\\ {{V O^{2}=35}}\end{align}$[/tex]
Taking the square root of both sides, we get:
VO ≈ 5.92 cm
Rounding to three significant figures, we get:
VO ≈ 5.92 cm
To know more about pyramid's base visit:-
brainly.com/question/19567818
#SPJ1
3x + y = 6
Y + 2 = x
Answer: x = 2, y = 0
Step-by-step explanation:
Assuming you need help solving for x or y, and the capital Y is y, we have the system of equations:
3x + y = 6
y + 2 = x
Substituting x for y + 2 gives us
3(y + 2) + y = 6
3y + 6 + y = 6
4y = 0
y = 0
Plugging y = 0 in for the second equation gives us
x = 0 + 2, or x = 2
A line that includes the points (n, 6) and (3, -2) has a slope of 8/5. What is the value of n?
Answer:
n = 8
Step-by-step explanation:
We can find the slope using the slope formula which, which is
[tex]m = \frac{y_{2}-y_{1} }{x_{2}-x_{1} }[/tex], where x2, y2, x1, and y1 are a pair of coordinates and m is the slope.
We can allow (3, -2) to represent x2 and y2, and (n, 6) to represent x1 and y1:
[tex]8/5=\frac{-2-6}{3-n}\\ 8/5=\frac{-8}{3-n}\\ 8/5(3-n)=-8\\24/5-8/5n=-8\\-8/5n=-64/5\\n=8[/tex]
Find the area of the figure. (Sides meet at right angles.)
3 yd
8 yd
3 yd
5 yd
6 yd
The area οf the figure is 33 square yards.
What is rectangle?A rectangle is a clοsed 2-D shape, having 4 sides, 4 cοrners, and 4 right angles (90°).The οppοsite sides οf a rectangle are equal and parallel. Since, a rectangle is a 2-D shape, it is characterized by twο dimensiοns, length, and width. Length is the lοnger side οf the rectangle and width is the shοrter side.
A crοssed rectangle is a crοssed (self-intersecting) quadrilateral which cοnsists οf twο οppοsite sides οf a rectangle alοng with the twο diagοnals (therefοre οnly twο sides are parallel). It is a special case οf an antiparallelοgram, and its angles are nοt right angles and nοt all equal, thοugh οppοsite angles are equal. Other geοmetries, such as spherical, elliptic, and hyperbοlic, have sο-called rectangles with οppοsite sides equal in length and equal angles that are nοt right angles.
Tο find the area οf the figure, we first find the area οf the rectangle (8 yds by 6 yds) and subtract the area οf the smaller rectangle (3 yds by 5 yds). The area οf the figure is:
Area = (8 yd)(6 yd) - (3 yd)(5 yd)
[tex]= 48 yd^2 - 15 yd^2[/tex]
[tex]= 33 yd^2[/tex]
Therefοre, the area οf the figure is 33 square yards.
To know more about problems related to rectangles, click here:
https://brainly.com/question/27035529
#SPJ1
A survey was given asking whether they watch movies at home from Netflix, Redbox, or a video store. Use the results to determine how many people use Redbox.
42 only use Netflix
44 only use Redbox
12 only use a video store
11 use only a video store and Redbox
42 use only Netflix and Redbox
33 use only a video store and Netflix
10 use all three
27 use none of these
How any people just use RedBox?
Answer:69
Step-by-step explanation: 32+420-90+09=69 pls mark it 5 stars
A convex, 11-sided polygon can have at most how many acute interior angles?
Note: Convex means that each interior angle measure is less than 180 degrees
Answer: At most 18 acute angles
Step-by-step explanation:
The sum of the interior angles of an n-sided polygon is (n-2) × 180 degrees. In a convex polygon, each interior angle is less than 180 degrees.
Let a₁, a₂, ..., a₁₁ be the interior angles of the 11-sided polygon. Then the sum of the interior angles is:
a₁ + a₂ + ... + a₁₁ = (11-2) × 180 = 1620 degrees
Since each angle is acute, we know that each angle is less than 90 degrees. Let A be the number of acute angles. Then the sum of the acute angles is at most:
A × 90
So we have:
a₁ + a₂ + ... + a₁₁ ≤ A × 90
Substituting the sum of the interior angles, we get:
1620 ≤ A × 90
Solving for A, we get:
A ≤ 18
Therefore, the polygon can have at most 18 acute angles.
FILL IN THE BLANK ______ can creep into a study if subjects are picked (intentionally or not) according to some criterion and not randomly.
Selection bias can creep into a study if subjects are picked (intentionally or not) according to some criterion and not randomly.
Selection bias occurs when the selection of study participants is not random and is instead influenced by certain criteria. This can result in a non-representative sample that does not accurately reflect the population being studied, leading to inaccurate conclusions. For example, if a study on the effectiveness of a medication only enrolls participants who are already known to respond well to that medication, the results may overestimate its effectiveness in the general population. To minimize selection bias, researchers should use random sampling techniques and carefully consider the inclusion and exclusion criteria .
To know more about Selection bias, here
brainly.com/question/30355124
#SPJ4
When expressions of the form (x −r)(x − s) are multiplied out, a quadratic polynomial is obtained. For instance, (x −2)(x −(−7))= (x −2)(x + 7) = x2 + 5x − 14.
a. What can be said about the coefficients of the polynomial obtained by multiplying out (x −r)(x − s) when both r and s are odd integers? when both r and s are even integers? when one of r and s is even and the other is odd?
b. It follows from part (a) that x2 − 1253x + 255 cannot be written as a product of two polynomials with integer coefficients. Explain why this is so.
a.(1) When both r and s are odd integers, the quadratic polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers.
(2) When both r and s are even integers, the polynomial obtained by multiplying out (x - r)(x - s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers.
(3) When one of r and s is even and the other is odd, the polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, the coefficient of x term will be an odd integer, while the constant term will be an even integer.
b. x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.
a. When both r and s are odd integers, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers. This is because the sum of two odd integers and the product of two odd integers is also an odd integer.
When both r and s are even integers, the product (x − r)(x − s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers. This is because the sum of two even integers and the product of two even integers is also an even integer.
When one of r and s is even and the other is odd, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and the coefficient of x term will be an odd integer, while the constant term will be an even integer. This is because the sum of an odd and even integer is an odd integer, and the product of an odd and even integer is an even integer.
b. If x^2 - 1253x + 255 can be written as a product of two polynomials with integer coefficients, then we can write it as (x - r)(x - s) where r and s are integers. From part (a), we know that both r and s cannot be odd integers since the coefficient of x term would be odd, but 1253 is an odd integer. Similarly, both r and s cannot be even integers since the constant term would be even, but 255 is an odd integer. Therefore, one of r and s must be odd and the other must be even. However, the difference between an odd integer and an even integer is always odd, so the coefficient of x term in the product (x - r)(x - s) would be odd, which is not equal to the coefficient of x term in x^2 - 1253x + 255. Hence, x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.
Learn more about quadratic polynomial here
brainly.com/question/28988445
#SPJ4
Helpp with these questions please
Solution In the Attachment Above
Hope It Helps :)
find an equation of the curve that passes through the point (0, 1) and whose slope at (x, y) is 13xy.
The equation of the curve that passes through the point (0, 1) and whose slope at (x, y) is 13xy is y = e^(13x^2/2).
To find an equation of the curve that passes through the point (0, 1) and whose slope at (x, y) is 13xy, we can use the method of separation of variables. Let's start by separating the variables:
dy/dx = 13xy
We can then rewrite this equation as:
dy/y = 13x dx
Integrating both sides of the equation gives:
ln|y| = 13x^2/2 + C
where C is the constant of integration.
To find C, we can use the fact that the curve passes through the point (0, 1). Substituting x=0 and y=1 into the equation above, we get:
ln|1| = 0 + C
C = 0
Substituting this value of C back into the equation gives:
ln|y| = 13x^2/2
Solving for y gives:
|y| = e^(13x^2/2)
Since the curve passes through the point (0, 1), we can take the positive branch of the absolute value to get:
y = e^(13x^2/2)
To learn more about equation click on,
https://brainly.com/question/29971781
#SPJ4
question content area top part 1 use a triple integral to find the volume of the solid bounded below by the cone z
The volume of the solid bounded below by the cone z = √(x^2 + y^2) and bounded above by the sphere x^2 + y^2 + z^2 = 18 is 192π/3 cubic units
To find the volume of the solid bounded below by the cone z = √(x^2 + y^2) and bounded above by the sphere x^2 + y^2 + z^2 = 18, we can use a triple integral.
First, we need to determine the limits of integration. Since the solid is symmetric about the z-axis, we can use cylindrical coordinates.
The cone is given by z = √(x^2 + y^2), which in cylindrical coordinates becomes z = r. The sphere is given by x^2 + y^2 + z^2 = 18, which in cylindrical coordinates becomes r^2 + z^2 = 18.
Thus, the limits of integration are
0 ≤ r ≤ √(18 - z^2)
0 ≤ θ ≤ 2π
0 ≤ z ≤ √(r^2)
The integral to find the volume is
V = ∭ dV = ∫∫∫ dV
Using cylindrical coordinates, dV = r dz dr dθ, so the integral becomes
V = ∫₀²π ∫₀ᵣ√(18 - z²) ∫₀ᵣ r dz dr dθ
We can simplify this integral by first integrating with respect to z:
V = ∫₀²π ∫₀ᵣ√(18 - z²) r dz dr dθ
Using a trigonometric substitution u = z/√(18 - z²), we can simplify this to
V = ∫₀²π ∫₀¹ r√(18 - u²(18)) 18du dr dθ
V = 18∫₀²π ∫₀¹ r√(18(1 - u²)) du dr dθ
Using another substitution u = sin(θ), we can simplify this to:
V = 36∫₀²π ∫₀¹ r√(1 - u²) du dr dθ
This integral can be evaluated using the formula for the volume of a sphere of radius R
V = 36(4/3 π(√2)³)
V = 192π/3 cubic units
Learn more about volume here
brainly.com/question/14527107
#SPJ4
The given question is incomplete, the complete question is:
Use a triple integral to find the volume of the solid bounded below by the cone z = √(x^2 + y^2 ) and bounded above by the sphere x^2 + y^2 + z^2 = 18
Estimate the maximum fuel cell area that can be operated at 1 A/cmunder the condition from Example 5.2.Assume a stoichiometric number of 2.Assume that the fuel cell is made of a single straight flow channel. Discuss why channel flow in fuel cells is almost always considered to be laminar
The maximum fuel cell area that can be operated at 1 A/cm^2 under the given conditions can be estimated using the equation A = I/(2FJ), where A is the maximum cell area, I is the current density (1 A/cm^2), F is the Faraday constant, and J is the current density per unit area. Assuming a stoichiometric number of 2 and substituting the given values, we get A = 0.029 m^2 or 290 cm^2.
Channel flow in fuel cells is almost always considered to be laminar because turbulent flow can cause mixing of the reactants and products, reducing the efficiency of the fuel cell. Laminar flow allows for efficient mass transport of the reactants and products to and from the electrode surface. Additionally, laminar flow reduces the likelihood of damage to the fuel cell due to erosion or corrosion caused by turbulent flow. However, the design of fuel cell flow channels can also affect the degree of turbulence and mixing, and optimizing this balance is an ongoing area of research.
To know more on fuel cell
https://brainly.com/question/20084242
#SPJ4