unit 8 right triangles and trigonometry homework 7 law of cosines

Answer:

Step-by-step explanation:

To find the length of QR in triangle PQR, we can use the trigonometric ratio known as the sine function.

In a right triangle, the sine of an angle is defined as the ratio of the length of the side opposite the angle to the length of the hypotenuse.

Given that angle P = 26° and the length of PQ = 8.5 feet, we can use the sine function to find the length of QR.

sin(P) = Opposite / Hypotenuse

sin(26°) = QR / 8.5

To solve for QR, we can rearrange the equation:

QR = sin(26°) * 8.5

Using a calculator, we find:

QR ≈ 3.6761 * 8.5

QR ≈ 31.2449

Rounding to the nearest tenth, the length of QR is approximately 31.2 feet.

Learn more about triangle here:

https://brainly.com/question/17335144

#SPJ11

Answer:

1/9

(1/3)2 = (1/3) × (1/3) = 1/9

The reported p-value of 0.139 suggests that there is no significant evidence to reject the null hypothesis that the true mean distance traveled by the electric car is equal to 200 miles. This means that the sample data does not provide enough evidence to support Aaron's hypothesis that the car does not travel as far as the company claimed.

Since the p-value is greater than the significance level of 0.05, we fail to reject the null hypothesis at the 0.05 level of significance. In other words, we do not have enough evidence to conclude that the car's actual mean distance traveled is significantly different from the claimed distance of 200 miles.

Therefore, Aaron's hypothesis that the car does not travel as far as the company claimed is not supported by the data. He should continue to use the car as it is expected to travel 200 miles before requiring a recharge based on the company's claim.

To know more about distance, refer here :

https://brainly.com/question/13034462#

#SPJ11

The Maclaurin polynomial of degree 4 for [tex]e^x,[/tex]  evaluated at x = 1/2, is a good approximation for √e with a maximum error of 0.01:

≈ 1.64872

The Maclaurin series expansion for [tex]e^x[/tex]is:

[tex]e^x = 1 + x + (x^2 / 2!) + (x^3 / 3!) + (x^4 / 4!) + ...[/tex]

To approximate √e, we can set x = 1/2 in this series:

[tex]e^{(1/2)} = 1 + 1/2 + (1/2)^2 / 2! + (1/2)^3 / 3! + (1/2)^4 / 4! + ...[/tex]

Simplifying this expression, we get:

[tex]\sqrt{e } \approx 1 + 1/2 + (1/2)^2 / 2! + (1/2)^3 / 3! + (1/2)^4 / 4![/tex]

To find the maximum error of this approximation, we need to use the remainder term of the Maclaurin series expansion:

[tex]R_n(x) = f^(n+1)(c) * (x^{(n+1)} / (n+1)!)[/tex]

where [tex]f^{(n+1)} (c)[/tex] is the (n+1)th derivative of f evaluated at some point c between 0 and x.

In this case, since we are approximating √e with [tex]e^{(1/2)} ,[/tex] we have:

[tex]R_4(1/2) = e^c * (1/2)^5 / 5![/tex]

where 0 < c < 1/2.

Since [tex]e^c[/tex] is a constant factor that we don't know, we can bound the maximum error by bounding [tex]R_4(1/2):[/tex]

[tex]|R_4(1/2)| $\leq$ e^{(1/2)}\times (1/2)^5 / 5![/tex]

To find the value of n such that this bound is less than 0.01, we can solve for n:

[tex]e^{(1/2)} * (1/2)^5 / 5! $\leq$ 0.01[/tex]

n = 4.

Therefore, the Maclaurin polynomial of degree 4 for [tex]e^x,[/tex]  evaluated at x = 1/2, is a good approximation for √e with a maximum error of 0.01:

[tex]\sqrt{e} \approx 1 + 1/2 + (1/2)^2 / 2! + (1/2)^3 / 3! + (1/2)^4 / 4! \approx 1.64872[/tex]

For similar question on Maclaurin polynomial.

https://brainly.com/question/29652576

#SPJ11

(i) The null hypothesis is that the mean living area of all single-family homes in the county is equal to or less than 2400 square feet. The alternative hypothesis is that the mean living area of all single-family homes in the county is greater than 2400 square feet.

(ii) The test statistic is calculated using the formula: (sample mean - hypothesized mean) / (standard deviation / square root of sample size). In this case, the test statistic is [tex]\frac{(2540 - 2400)}{\frac{472}{\sqrt{50} } } =2.44[/tex]

(iii) The p-value is the probability of obtaining a sample mean as extreme or more extreme than the one observed, assuming the null hypothesis is true. Using a t-distribution with 49 degrees of freedom (since we are using a sample size of 50 and estimating the population standard deviation), we can find the p-value to be 0.009.

(iv) Using a significance level of 0.05, we can conclude that the real estate agent's claim is not true, since the p-value is less than 0.05. We reject the null hypothesis and accept the alternative hypothesis that the mean living area of all single-family homes in the county is greater than 2400 square feet. If we use a significance level of 0.01 instead, we still reject the null hypothesis since the p-value is less than 0.01.

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ11

To estimate Δf = f(3.1) - f(3) using the linear approximation, we first find the derivative of f(x):

f'(x) = -18x / (1 + x^2)^2

Next, we use the linear approximation formula:

Δf ≈ f'(a) * Δx

where a is the value at which we are approximating the change, and Δx is the change in x.

In this case, a = 3 and Δx = 0.1, so we have:

Δf ≈ f'(3) * 0.1

To find f'(3), we substitute x = 3 into the derivative expression:

f'(3) = -18(3) / (1 + 3^2)^2 = -54 / 16 = -3.375

Substituting this value into the approximation formula, we get:

Δf ≈ (-3.375) * 0.1 = -0.3375

To compute the actual change, we evaluate f(3.1) and f(3):

f(3.1) = 9 / (1 + (3.1)^2) ≈ 0.7317

f(3) = 9 / (1 + 3^2) = 1

Therefore, the actual change is:

Δf = f(3.1) - f(3) ≈ 0.7317 - 1 = -0.2683

To compute the error in the linear approximation, we subtract the actual change from the estimated change:

Error = Δf - Δf ≈ -0.3375 - (-0.2683) = -0.0692

To compute the percentage error, we divide the error by the absolute value of the actual change and multiply by 100:

Percentage Error = (Error / |Δf|) * 100 = (-0.0692 / |-0.2683|) * 100 ≈ 25.8%

Therefore, the estimated change is approximately -0.3375, the actual change is approximately -0.2683, the error in the linear approximation is approximately -0.0692, and the percentage error is approximately 25.8%.

Learn more about Percentage here: brainly.com/question/32386531

#SPJ11

Answer:

There cannot be a triangle with sides a = 3, b = 4, and c = 100 because it would violate the triangle inequality, which states that the sum of any two sides of a triangle must be greater than the third side.

Step-by-step explanation:

In this case, we have a + b = 3 + 4 = 7, which is less than c = 100. This violates the triangle inequality and therefore, a triangle cannot be formed with sides of length 3, 4, and 100.

To understand why the triangle inequality holds, consider drawing a triangle with sides a, b, and c. Then, we can use the Pythagorean theorem to relate the lengths of the sides:

a^2 + b^2 = c^2

We can rearrange this equation to get:

c^2 - a^2 = b^2

Now, since b is a side of the triangle, it must be positive. Therefore, we can take the square root of both sides of the equation to get:

sqrt(c^2 - a^2) = b

But we also know that b + a > c, so we can substitute b = c - a into this inequality to get:

c - a + a > c

which simplifies to:

a > 0

Therefore, we can conclude that c^2 - a^2 > 0, or equivalently, c > a. By a similar argument, we can also show that c > b. This proves the triangle inequality: c > a and c > b, which implies that a + b > c.

To know more about Triangle refer here

https://brainly.com/question/2773823#

#SPJ11

Crystallization is the process in which energy is evolved as heat.

During the process of crystallization, energy is released as heat. When a substance changes from a liquid or gas phase to a solid phase, its particles arrange themselves in an ordered, crystalline structure. This rearrangement of particles results in the release of excess energy in the form of heat. Therefore, in the process of crystallization, energy is evolved as heat.

Learn more about crystallization

brainly.com/question/32130991

#SPJ11

if f is a quadratic function such that f(0) = 4 and f(x) x2(x 1)3 dx is a rational function, the value of f'(0) is 0.

Let f(x) = ax² + bx + c be the quadratic function. Then we have f(0) = c = 4. Thus, we can write f(x) = ax² + bx + 4.

if f is a quadratic function such that f(0) = 4 and f(x) x2(x 1)3 dx is a rational function, the value of f '(0) is

Now, we need to find the derivative f'(0). Since f(x) is a quadratic function, we know that f'(x) is a linear function. Thus, f'(x) = 2ax + b.

Using integration by parts, we can evaluate the given integral as follows:

∫ x²(x + 1)³ dx

= ∫ x²(x + 1)² (x + 1) dx

= (1/3) x³(x + 1)² - ∫ (2/3) x³(x + 1) dx

= (1/3) x³(x + 1)² - (1/6) x⁴ - (1/15) x⁵ + C

where C is the constant of integration.

Since the integral is a rational function, the limit of f'(x) as x approaches 0 must exist. Thus, we can use L'Hopital's rule to evaluate f'(0) as follows:

f'(0) = lim x->0 [f(x) - f(0)] / x

     = lim x->0 [ax² + bx + 4] / x

     = lim x->0 2ax + b

     = b

Since b is a constant, we have f'(0) = b = 0.

Learn more about quadratic function here

https://brainly.com/question/31313333

#SPJ11

(a) To approximate the wind speed for a barometric pressure of 700 mb, we can substitute x = 700 into the function w(x) = -1.11x + 950:

w(700) = -1.11(700) + 950 ≈ 176.7 + 950 ≈ 1126.7 mph.

Therefore, the approximate wind speed for a hurricane with a barometric pressure of 700 mb is approximately 1126.7 mph.

(b) To find the inverse function of w(x), we can swap the roles of x and w(x) and solve for x:

x = -1.11w + 950.

Now, let's solve this equation for w:

w = (-x + 950) / 1.11.

The inverse function of w(x) is given by:

w^(-1)(x) = (-x + 950) / 1.11.

In the context of Hurricane Katrina, this inverse function represents the barometric pressure x (in mb) based on the wind speed w (in mph).

(c) To approximate the barometric pressure for a wind speed of 70 mph, we can substitute w = 70 into the inverse function w^(-1)(x):

x = (-(70) + 950) / 1.11 ≈ 832.43 mb.

Rounding to the nearest mb, the approximate barometric pressure for a wind speed of 70 mph is 832 mb.

Note: It's important to note that these calculations are based on the given function and data from Hurricane Katrina. Actual wind speeds and barometric pressures in real-world situations may vary.

Learn more about function here: brainly.com/question/32386619

#SPJ11

The radius of convergence, R, of the series ∑[infinity]n=1 xn8n-1 is 1/8. The interval of convergence, I, is (-1/8, 1/8) or (-1/8 ≤ x ≤ 1/8).

To find the radius of convergence, we can use the ratio test. Let's apply the ratio test to the given series:

lim |xn+1 × 8n / (xn × 8n-1)| as n approaches infinity.

Simplifying the expression, we get:

lim |x × 8n / 8n-1| as n approaches infinity.

Since the absolute value of x does not affect the limit, we can simplify further:

lim |8x| as n approaches infinity.

For the series to converge, the limit must be less than 1. Therefore, we have:  |8x| < 1.

Solving for x, we find:   -1/8 < x < 1/8.

Learn more about convergence here:

https://brainly.com/question/29258536

#SPJ11

A power series for f(x) = 6(2x+1)^2, ||<1,  can be calculated by  using the binomial series formula: (1 + t)^n = ∑(k=0 to infinity) [(n choose k) * t^k]. The power series for f(x) is: f(x) = 6 + 12(x - (-1/2)) + 6(x - (-1/2))^2 + ∑(k=3 to infinity) [ck * (x - (-1/2))^k]

Where (n choose k) is the binomial coefficient, given by:
(n choose k) = n! / (k! * (n-k)!)
Applying this formula to our function, we get:
f(x) = 6(2x+1)^2 = 6 * (4x^2 + 4x + 1)
= 6 * [4(x^2 + x) + 1]
= 6 * [4(x^2 + x + 1/4) - 1/4 + 1]
= 6 * [4((x + 1/2)^2 - 1/16) + 3/4]
= 6 * [16(x + 1/2)^2 - 1]/4 + 9/2
= 24 * [(x + 1/2)^2] - 1/4 + 9/2
Now, let's focus on the first term, (x + 1/2)^2:
(x + 1/2)^2 = (1/2)^2 * (1 + 2x + x^2)
= 1/4 + x/2 + (1/2) * x^2
Substituting this back into our expression for f(x), we get:
f(x) = 24 * [(1/4 + x/2 + (1/2) * x^2)] - 1/4 + 9/2
= 6 + 12x + 6x^2 - 1/4 + 9/2
= 6 + 12x + 6x^2 + 17/4
= 6 + 12(x - (-1/2)) + 6(x - (-1/2))^2
This final expression is in the form of a power series, with:
c0 = 6
c1 = 12
c2 = 6
c3 = 0
c4 = 0
c5 = 0
and:
x0 = -1/2
So the power series for f(x) is:
f(x) = 6 + 12(x - (-1/2)) + 6(x - (-1/2))^2 + ∑(k=3 to infinity) [ck * (x - (-1/2))^k]
Note that since ||<1, this power series converges for all x in the interval (-1, 0) U (0, 1).

Read more about power series.

https://brainly.com/question/31776977

#SPJ11

The probability it will hit the shaded region is 21.44%

The radius of the circle = 2cm

Then one side of the square is twice the radius of the circle

Then one side of the square = 2 × 2 = 4 cm

Area of circle = πr² = 22/7   × (2)

Area of circle = 22/7  × 4

Area of circle = 12.57 cm²

Area of square = a²

Area of square = 4²

Area of square = 16 cm²

Then the area of shaded region = 16 − 12.57 = 3.43 cm²

Then % probability of hits in shaded region = 3.43 / 16 × 100

Then % probability of hits in shaded region = 21.44 %

To know more about probability click here :

https://brainly.com/question/13957582

#SPJ4

The question is incomplete the complete question is :

If a randomly thrown dart hits the board below, what is the probability it will hit the shaded region?

In hypothesis testing, α (alpha) and β (beta) are the probabilities of making Type I and Type II errors, respectively. Type I errors occur when the null hypothesis is rejected even though it is true, while Type II errors occur when the null hypothesis is not rejected even though it is false.

Without more context, it is difficult to say definitively what the sum of the values of α and β refers to.

However, based on the options provided, it seems that this question may be related to hypothesis testing.

The sum of α and β is related to the power of a statistical test, which is the probability of correctly rejecting a false null hypothesis.

Specifically, the power of a test is equal to 1 - β (i.e., the probability of correctly rejecting a false null hypothesis) when α is fixed.

Therefore, the sum of α and β is not always 1, is necessary for hypothesis testing, and does not give the probability of taking the correct decision.

It is also not always equal to 0.5, as this would only be the case if both Type I and Type II errors were equally likely, which is not always true.

To Know more about  hypothesis testing refer here

https://brainly.com/question/30588452#

#SPJ11

The dilation centered at the origin with a scale factor of 4 refers to a transformation that stretches or shrinks an object four times its original size, with the origin as the center of dilation.

In geometry, a dilation is a transformation that changes the size of an object while preserving its shape. A dilation centered at the origin means that the origin point (0, 0) serves as the fixed point around which the dilation occurs. The scale factor determines the amount of stretching or shrinking.
When the scale factor is 4, every point in the object is multiplied by a factor of 4 in both the x and y directions. This means that the x-coordinate and y-coordinate of each point are multiplied by 4.
For example, if we have a point (x, y), after the dilation, the new coordinates would be (4x, 4y). The resulting figure will be four times larger than the original figure if the scale factor is greater than 1, or it will be four times smaller if the scale factor is between 0 and 1.
Overall, a dilation centered at the origin with a scale factor of 4 stretches or shrinks an object four times its original size, with the origin as the center of dilation.

Learn more about origin here
https://brainly.com/question/21394771



#SPJ11

To verify the divergence theorem, we need to compute both the surface integral of the normal component of the vector field over the surface of the region and the volume integral of the divergence of the vector field over the region. If these two integrals are equal, then the divergence theorem is satisfied.

First, let's compute the volume integral of the divergence of the vector field:

div(f) = ∇ · f = ∂(4x)/∂x + ∂(6z)/∂z + ∂(8y)/∂y = 4 + 0 + 8 = 12

Using cylindrical coordinates, we can write the region as:

0 ≤ r ≤ 1

0 ≤ θ ≤ 2π

0 ≤ z ≤ 5

The surface of the region consists of two parts: the top surface z = 5 and the curved surface x^2 + y^2 = 1, 0 ≤ z ≤ 5.

For the top surface, the outward normal vector is k, and the normal component of the vector field is f · k = 8y. Thus, the surface integral over the top surface is:

∬S1 f · k dS = ∬D (8y) r dr dθ = 0

where D is the projection of the top surface onto the xy-plane.

For the curved surface, the outward normal vector is (x, y, 0)/r, and the normal component of the vector field is f · (x, y, 0)/r = (4x^2 + 8y^2)/r. Thus, the surface integral over the curved surface is:

∬S2 f · (x, y, 0)/r dS = ∬D (4x^2 + 8y^2) dA = 4∫0^1∫0^2π r^3 cos^2θ + 2r^3 sin^2θ r dθ dr = 4π/3

where D is the projection of the curved surface onto the xy-plane.

Therefore, the total surface integral is:

∬S f · n dS = ∬S1 f · k dS + ∬S2 f · (x, y, 0)/r dS = 0 + 4π/3 = 4π/3

Finally, the volume integral of the divergence of the vector field over the region is:

∭V div(f) dV = ∫0^5∫0^1∫0^2π 12 r dz dr dθ = 60π

Since the total surface integral and the volume integral are not equal, the divergence theorem is not satisfied for this vector field and region.

To learn more about divergence theorem refer below:

https://brainly.com/question/28155645

#SPJ11

The approximate value of b is 40.

The slope of the line of best fit is 4/3.

We have,

From the scatter plot,

The y-intercept is (0, b).

This means,

The y-values when x = 0.

We can see that,

y = 40 when x = 0.

Now,

There are two points on the scatter plot.

B = (20, 70) and C = (35, 90)

So,

The slope.

= (90 - 70) / (35 - 20)

= 20/15

= 4/3

Thus,

The approximate value of b is 40.

The slope of the line of best fit is 4/3.

Learn more about scatterplots here:

https://brainly.com/question/7219025

#SPJ1

The formula for the perimeter of the given rectangle is P = 10 + 2w where w represents the width of the rectangle and depends on P.

Perimeter of the rectangle = PWidth of the rectangle = wLength of the rectangle = 5In general, the formula for perimeter of a rectangle is given as:P = 2(l + w)whereP = Perimeter of the rectanglel = Length of the rectanglew = Width of the rectangleSubstitute the given value of length and width in the above formula and we get:P = 2(l + w)P = 2(5 + w)P = 10 + 2wHence, the formula for the perimeter of the given rectangle is P = 10 + 2w where w represents the width of the rectangle and depends on P.

Learn more about Perimeter here,

https://brainly.com/question/397857

#SPJ11

The associated doubling time is also approximately 27.725 (rounded to three significant digits).

To find the associated half-life time or doubling time, we first need to understand what these terms mean.
Half-life time (th) is the amount of time it takes for half of a substance to decay or be eliminated.

In this case, we are dealing with exponential decay, so we can use the formula:
q = q0 * e^(-kt)

where q is the amount of substance remaining at time t, q0 is the initial amount of substance, k is the decay constant, and e is Euler's number (approximately equal to 2.71828).

We are given the equation q = 800e^(-0.025t), which means that the initial amount of substance (q0) is 800 and the decay constant (k) is 0.025.

To find the half-life time, we need to find the value of t when q = q0/2:
q0/2 = 800/2 = 400
400 = 800e^(-0.025t)

Dividing both sides by 800, we get:
0.5 = e^(-0.025t)

Taking the natural logarithm of both sides, we get:
ln(0.5) = -0.025t

Solving for t, we get:
t = ln(0.5)/(-0.025)

Using a calculator to evaluate this expression, we get:
t ≈ 27.725

Therefore, the associated half-life time is approximately 27.725 (rounded to three significant digits).

Doubling time (td) is the amount of time it takes for a substance to double in amount. In this case, we can use the formula:
q = q0 * e^(kt)

where k is the growth constant (since we are looking at the increase in amount rather than the decrease).

To find the doubling time, we need to find the value of t when q = 2q0:
2q0 = 2 * 800 = 1600
1600 = 800e^(0.025t)

Dividing both sides by 800, we get:
2 = e^(0.025t)

Taking the natural logarithm of both sides, we get:
ln(2) = 0.025t

Solving for t, we get:
t = ln(2)/0.025

Using a calculator to evaluate this expression, we get:
t ≈ 27.725

Therefore, the associated doubling time is also approximately 27.725 (rounded to three significant digits).

Know more about doubling time here:

https://brainly.com/question/29215161

#SPJ11

The triple integral of the function ∫∫∫E x²+y²+z²  dV evaluated by using  spherical coordinates is equal to 97.2π.

Triple integral ∫∫∫E x²+y²+z² dV in spherical coordinates,

Express the integrand and the volume element dV in terms of the spherical coordinates ρ, θ, and φ.

In spherical coordinates, the volume element is ,

dV = ρ² sin φ dρ dθ dφ

Since the ball E is defined by x²+y²+z² ≤9,

which is equivalent to ρ≤3, with following limits of integration.

0 ≤ ρ ≤ 3

0 ≤ θ ≤ 2π

0 ≤ φ ≤ π

Therefore, the triple integral can be written as,

∫∫∫E x²+y²+z²  dV

= [tex]\int_{0}^{2\pi }\int_{0}^{3}\int_{0}^{\pi }[/tex]  ρ² ρ² sin φ dφ dθ dρ

Evaluating the innermost integral first, we get,

[tex]\int_{0}^{\pi }[/tex]ρ² sin φ dφ

= -ρ² cos φ [tex]|_{0}^{\pi }[/tex]

= ρ²

Substituting this into the triple integral, we get,

∫∫∫Ex²+y²+z²  dV = [tex]\int_{0}^{3}\int_{0}^{2\pi }[/tex] ρ⁴ sin φ dθ dρ

Evaluating the θ integral, we get,

[tex]\int_{0}^{2\pi }[/tex]π ρ⁴ sin φ dθ = 2π ρ⁴ sin φ

Substituting this into the triple integral, we get,

∫∫∫E x²+y²+z²  dV = [tex]\int_{0}^{3}[/tex]2π ρ⁴ sin φ dρ

Evaluating the ρ integral, we get,

[tex]\int_{0}^{3}[/tex]2π ρ⁴ sin φ dρ

= (2π/5) [ρ⁵][tex]|_{0}^{3}[/tex]

= (2π/5) (3⁵)

= 97.2π

Therefore, the triple integral ∫∫∫E x²+y²+z²  dV evaluated in spherical coordinates is 97.2π.

learn more about triple integral here

brainly.com/question/31482362

#SPJ4

The minimum possible number of nodes in the resulting Ternary Search Tree is 42.

A Ternary Search Tree is a tree data structure optimized for searching strings.

It has a root node, and each node has three children (left, middle, and right), and the keys are strings.

For a TST with n strings of length k, the minimum possible number of nodes can be calculated using the formula:

N = 2 + 3 × n + 4 × L

N is the minimum number of nodes, and L is the average length of the strings.

In this case, n = 4 and k = 7, so the average length of the strings is also 7.

N = 2 + 3 × 4 + 4 × 7

N = 2 + 12 + 28

N = 42

For similar questions on Ternary

https://brainly.com/question/29413370

#SPJ11

The minimum possible number of nodes in the resulting Ternary Search Tree (TST) would be 21.

In a Ternary Search Tree, each node can have up to three children: one for values less than the current node, one for values equal to the current node, and one for values greater than the current node. Since we have n = 4 strings of length k = 7, the maximum number of nodes needed to store all possible prefixes of the strings is k * (n + 1).

In this case, k = 7 and n = 4, so the maximum number of nodes needed would be 7 * (4 + 1) = 35. However, since we want to find the minimum possible number of nodes, we consider that some prefixes may be shared among the strings, resulting in fewer nodes required.

Since the strings have a fixed length of 7, each node in the TST will correspond to one character position. Therefore, we need one node for each character position in the strings, and an additional node for the root. Thus, the minimum possible number of nodes in the resulting Ternary Search Tree is 7 + 1 = 8.

However, it is worth noting that the actual number of nodes in the TST may be greater than the minimum if the strings have common prefixes or if the TST is optimized for balancing or other factors.

To learn more about Ternary Search Tree click here

brainly.com/question/31961382

#SPJ11

The sum of the first 7 terms of the sequence 4, 16, 64, ... is 87380.

The given sequence is a geometric sequence with a common ratio of 4. To find the sum of the first 7 terms using the partial sum formula, we can use the formula:
Sn = a(1 - r^n) / (1 - r)
Where Sn is the sum of the first n terms, a is the first term of the sequence, r is the common ratio, and n is the number of terms being added.
Using the formula with a = 4, r = 4, and n = 7, we get:
S7 = 4(1 - 4^7) / (1 - 4)
Simplifying this expression, we get:
S7 = 87380

Learn more about geometric here:

https://brainly.com/question/29113472

#SPJ11

The expression equivalent to cot2β(1−cos2β) for all values of β is sin2β.

This can be simplified by using the trignometry identity cos²β + sin²β = 1 and dividing both sides by cos²β to get 1 + tan²β = sec²β. Rearranging this equation gives tan²β = sec²β - 1, which can be substituted into the original expression to get cot2β(1−cos2β) = cot2β(sin²β) = (cos2β/sin2β)(sin²β) = cos2β(sinβ/cosβ) = sin2β.

Therefore, sin2β is equivalent to cot2β(1−cos2β) for all values of β for which cot2β(1−cos2β) is defined.

To know more about trignometry identity click on below link:

https://brainly.com/question/16946858#

#SPJ11

The expression simplified form is [tex]ln(((x + 2) * \sqrt x) / (x^2 + 3x + 2)^2)[/tex]

To calculate the expression:

[tex](1/7) ln(x + 2)^7 + (1/2) ln x - ln(x^2 + 3x + 2)^2[/tex]

We can simplify it step by step:

[tex]ln((x + 2)^7)/7 + (1/2) ln x - ln(x^2 + 3x + 2)^2[/tex]

[tex]ln((x + 2)^7)/7 + (1/2) ln x - 2 ln(x^2 + 3x + 2)[/tex]

[tex]ln((x + 2)) + (1/2) ln x - 2 ln(x^2 + 3x + 2)[/tex]

[tex]ln((x + 2) * √x) - ln((x^2 + 3x + 2)^2)[/tex]

[tex]ln(((x + 2) * \sqrt x) / (x^2 + 3x + 2)^2)[/tex]

So the simplified form of given expression [tex](1/7) ln(x + 2)^7 + (1/2) ln x - ln(x^2 + 3x + 2)^2[/tex] is

[tex]ln(((x + 2) * \sqrt x) / (x^2 + 3x + 2)^2)[/tex]

Learn more about logarithmic functions

brainly.com/question/30339782

#SPJ11

To serve eight people, you would need 1/2 cup of grated parmesan cheese.

To expand the recipe to feed eight people, we need to determine the amount of parmesan cheese needed for the new serving size.

Given that the original recipe for lasagna serving four requires 1/4 cup of grated parmesan cheese, we can calculate the amount needed to serve eight people by scaling up the recipe.

If the original recipe serves four and requires 1/4 cup of grated parmesan cheese, then for eight servings, we would need to double the recipe.

Doubling the recipe means doubling all the ingredients, including the parmesan cheese.

1/4 cup * 2 = 1/2 cup

Therefore, to serve eight people, you would need 1/2 cup of grated parmesan cheese.

Learn more about parmesan  here:

https://brainly.com/question/14681848

#SPJ11

Answer:

C & D

Step-by-step explanation:

The derivative of f(x) is f'(x) = -10x - 7.

f'(x) = -10x - 7

To find the derivative of f(x) using the four-step definition, we first need to find f(x+h). Substituting x+h for x in the function, we get:

f(x+h) = -5(x+h)^2 - 7(x+h) - 7

Expanding the squared term, we get:

f(x+h) = -5(x^2 + 2xh + h^2) - 7(x+h) - 7

Simplifying, we get:

f(x+h) = -5x^2 - 10xh - 5h^2 - 7x - 7h - 7

Next, we need to find f(x+h) - f(x):

f(x+h) - f(x) = (-5x^2 - 10xh - 5h^2 - 7x - 7h - 7) - (-5x^2 - 7x - 7)

Simplifying, we get:

f(x+h) - f(x) = -10xh - 5h^2 - 7h

Finally, we divide by h to find the derivative:

f'(x) = lim as h->0 (-10xh - 5h^2 - 7h)/h

f'(x) = -10x - 7

Therefore, the derivative of f(x) is f'(x) = -10x - 7.

Learn more about derivative here

https://brainly.com/question/31399608

#SPJ11

The point on the curve where the tangent line has a slope of 1/2 is (x, y) = (7, -7).

To find the point on the curve x = 3t^2 + 4, y = t^3 - 8 where the tangent line has a slope of 1/2, we need to determine the value of t at which this occurs. First, we find the derivatives of x and y with respect to t:
dx/dt = 6t
dy/dt = 3t^2
Next, we compute the slope of the tangent line by taking the ratio of dy/dx, which is equivalent to (dy/dt) / (dx/dt):
slope = (dy/dt) / (dx/dt) = (3t^2) / (6t) = t/2
Now, we set the slope equal to 1/2 and solve for t:
t/2 = 1/2
t = 1
With t = 1, we find the corresponding x and y values:
x = 3(1)^2 + 4 = 7
y = (1)^3 - 8 = -7
So, the point on the curve where the tangent line has a slope of 1/2 is (x, y) = (7, -7).

To know more about Tangent Line visit:
https://brainly.com/question/31326507
#SPJ11

At the end of the year, the amount in the account had decreased by 21%. The amount of money Martina has in her account after the 21% decrease is $6794.

Last year, Martina opened an investment account with $8600. At the end of the year, the amount in the account had decreased by 21%.

Let us calculate how much money she has in the account after a year.Solution:

Amount of money Martina had in her account when she opened = $8600

Amount of money Martina has in her account after the 21% decrease

Let us calculate the decrease in money. We will find 21% of $8600.21% of $8600

= 21/100 × $8600

= $1806.

Subtracting $1806 from $8600, we get;

Money in Martina's account after 21% decrease = $8600 - $1806

= $6794

Therefore, the money in the account after the 21% decrease is $6794. Therefore, last year, Martina opened an investment account with $8600.

At the end of the year, the amount in the account had decreased by 21%. The amount of money Martina has in her account after the 21% decrease is $6794.

To know more about investment, visit:

https://brainly.com/question/15105766

#SPJ11