1. The amount of OH¯ present in the solution is 0.1 mol/L
2. The amount of H⁺ present in the solution is 0.0000000000001 mol/L
3. The pH of the solution with H⁺ concentration of 1×10⁻⁴ mol/L is 4
1. How to determine the amount of OH¯ in the solutionWe'll begin by obtaining the pOH of the solution
pH = 13pOH =?pH + pOH = 14
13 + pOH = 14
Collect like terms
pOH = 14 - 13
pOH = 1
Finally, we can determine the OH¯
pOH = 1OH¯ =?pOH = –Log [OH¯]
1 = –Log [OH¯]
Multiply through by –1
–1 = Log [OH¯]
Take the anti-log of –1
[OH¯] = anti-log of (–1)
[OH¯] = 0.1 mol/L
2. How to determine the amount of H⁺pH = 13H⁺ =?pH = –Log [H⁺]
13 = –Log [OH¯]
Multiply through by –1
–13 = Log [H⁺]
Take the anti-log of –13
[H⁺] = anti-log of (–13)
[H⁺] = 0.0000000000001 mol/L
3. How to determine the pHH⁺ = 1×10⁻⁴ mol/LpH =?pH = –Log [H⁺]
pH = –Log 1×10⁻⁴
pH = 4
Learn more about pH:
https://brainly.com/question/3709867
#SPJ1
Carbon dioxide and water are produced when ethanol, C2H5OH, is burned in oxygen. The number of moles of CO2 that is produced when burning 6.0 mol of ethanol is
The number of moles of CO₂ that is produced when burning 6.0 mol of ethanol is 12 mol.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
Now we have to write the balanced equation
C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O
We can see that every 1 mole of ethanol we will get 2 mole of CO₂.
So 6.0 mol of ethanol we will get = 6.0 × 2.0
= 12 mol of CO₂
Thus from the above conclusion we can say that The number of moles of CO₂ that is produced when burning 6.0 mol of ethanol is 12 mol.
Learn more about the Balanced Chemical Equation here: https://brainly.com/question/26694427
#SPJ1
Which of the following is an oxidation-reduction reaction?
SO2(g) + H2O(l) Right arrow. H2SO3(aq)
CaCO3(s) Right arrow. CaO(s) + CO2(g)
Ca(OH)2(s) + H2CO3(l) Right arrow. CaCO3(aq) + 2H2O(l)
C6H12O6(s) + 6O2(g) Right arrow. 6CO2(g) + 6H2O(l)
B. The chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).
Oxidation reduction reaction
In oxidation reduction reaction, the oxidizing agent is reduced while reducing agent is oxidized.
In the chemical equation below;CaCO3(s) → CaO(s) + CO2(g)
Calcium (ca) is oxidized calcium (II) ion while the carbon (IV) oxide is reduced carbon (IV) oxide.
Thus, the chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).
Learn more about oxidation reduction reaction here: https://brainly.com/question/4222605
#SPJ1
Answer: The answer is B
Explanation: on edge
chemical change grade 10 mind map
Chemical change: A chemical reaction is the change of one chemical substance into another chemical substance. For instance: The rusting of iron, the curdling of milk, the digestion of food, breathing, etc.
What is a chemical reaction?
A chemical reaction results in a chemical change because a new material has entirely different properties from the original substance. In a chemical reaction, atoms rearrange themselves.Reactants are the chemicals that participate in a chemical reaction.Products are the new compounds created as a result of a chemical process. An illustration of a chemical reaction is burning magnesium in the air to produce magnesium oxide.2Mg(s) + O2(g) △→ 2MgO(s)The magnesium ribbon is cleaned with sandpaper before being burned in the air. This cleans the magnesium ribbon's surface of the basic magnesium carbonate protecting coating.Reactant: Materials that participate in a chemical reaction are referred to as reactants. Mg and O2, as an example.A product is a newly created substance that results from a chemical reaction. Example: MgO.A chemical reaction is the change of one chemical substance into another chemical substance.
To learn more about chemical reactions, refer to:
https://brainly.com/question/1222323
#SPJ9
Chemical change is the change chemical substance is transformed into another chemical substance.It is irreversible in nature , for example Reaction of medicine in body , milk to curd etc.
What is the difference between chemical and Physical change?1)Physical change temporary or reversible in nature but chemical change is irreversible in nature
2)In physical change there no new product is formed but in chemical change there formation of new product takes .
3) Physical change is change sin shape ,size or state for example freezing of water , melting of wax , and example of Chemical change are Burning of coal, digestion of food
to learn more about chemical change click here https://brainly.com/question/28089135
#SPJ9
Meteorologists use weather balloons to carry weather instruments high into the atmosphere. when it is first released at earth’s surface, a weather balloon typically appears underinflated. what happens to the balloon’s volume and pressure as it rises into the atmosphere? check all that apply. the pressure in the balloon decreases. the pressure in the balloon increases. the volume of the balloon increases. the volume of the balloon decreases.
the pressure in the balloon decreases- True
the pressure in the balloon increases- False
the volume of the balloon increases- True
the volume of the balloon decreases- False
To learn more about weather balloon visit:
https://brainly.com/question/13079902
#SPJ4
The enthalpy of fusion for Al is 10.7 kJ/mol. What is the energy change when 30.8 g of Al solidifies at 660°C?
The enthalpy of fusion for Al is 10.7 kJ/mol. -12.2 kJ is the energy change when 30.8 g of Al solidifies at 660°C.
What is Enthalpy of Fusion ?The amount of energy needed to change 1 mole of substance under state change at constant temperature and pressure is called enthalpy of fusion. It is also known as Latent heat of fusion. Unit of enthalpy of fusion is kJ/mol.
How to find the change in energy ?To find the change in energy use this expression:
q = n ΔH
where
q = Energy change
n = number of moles
ΔH = Molar enthalpy
Number of moles (n) = [tex]\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
= [tex]\frac{30.8\ g}{26.98\ \text{g/mol}}[/tex]
= 1.141 mol
Now put the values in above formula we get
q = - n ΔH [Negative sign is used because Al solidifies here]
= - (1.141 mol × 10.7 kJ/mol)
= -12.2 kJ
Thus from the above conclusion we can say that The enthalpy of fusion for Al is 10.7 kJ/mol. -12.2 kJ is the energy change when 30.8 g of Al solidifies at 660°C.
Learn more about the Latent heat of fusion here: https://brainly.com/question/87248
#SPJ1
What was the purpose of varying the concentrations of sodium alginate and CaCl2?
To determine how stable the beads are as well ensue the securing of maximum enzymes as well as the retention of their activity.
What is concentration?The concentration of a substance simply means the amount of the substance in solution. Thus we are looking at the amounts of sodium alginate and CaCl2 in the system.
The concentrations of the sodium alginate and CaCl2 is varied in order to determine how stable the beads are as well ensue the securing of maximum enzymes as well as the retention of their activity.
Learn more about enzymes:https://brainly.com/question/14953274
#SPJ1
Which of the following is the best definition of a chemical change?
A. All of these
B. The ability of something to undergo a change or reaction.
C. A change that alters the identity, or chemical composition, of a substance at the atomic level.
D. Something that can be observed or measured without changing the identity of the substance.
Chemical changes are changes that alter the identity or the chemical composition of substances at the atomic level.
What are chemical changes?When a substance changes chemically, the identity of the substance changes.
In other words, chemical changes are changes that occur to substances such that the entire chemical properties of the substances change.
These changes happen at the atomic levels of substances. Sometimes, the changes can also be physical as well.
More on chemical changes can be found here: https://brainly.com/question/23693316
#SPJ1
What is the reason why the fermentation products acetate and hydrogen gas (H2) are never abundant in aerobic soils and sediments
Acetate and hydrogen gas (H2) is never abundant in aerobic soils and sediments because they are tiny, highly reduced molecules that many bacteria that breathe oxygen and nitrates quickly absorb to use as fuel for energy generation.
Why are acetate and hydrogen gas not abundant in aerobic soils and sediments?Hydrogen is a substrate for methanogenic archaea and, along with acetate, one of the most significant intermediates in the methanogenic breakdown of organic materials. Numerous methanogenic environments exhibit contributions of H₂ to CH₄ production that are both significantly lower and significantly higher than is considered usual. H₂ is rapidly converted in methanogenic settings due to the simultaneous generation by fermenting and syntrophic bacteria and consumption by methanogenic archaea.
Learn more about archaea here:
https://brainly.com/question/3654264
#SPJ4
If a 4L solution is 80% concentrated lime juice and 20% water, how much 30% concentrated lime juice must be added so that the concentration of the resulting solution is 50% concentrated lime juice
The volume of 30% concentrated lime juice that must be added to a 4L solution of 80% concentrated lime juice and 20% water is 6 L.
What are mixtures?Mixtures are substances which are formed when two or more substances are physically combined together.
Mixtures are heterogenous in nature and the constituents can be easily separated.
The volume of 30% concentrated lime juice that must be added to a 4L solution of 80% concentrated lime juice and 20% water, so that the concentration of the resulting solution is 50% concentrated lime juice is determined as follows:
Let the volume of 30% lime juice required be x;
total volume of lime juice = 0.3x
For 80% lime juice, volume of lime juice = 0.8 * 4 = 3.2 L
New volume of lime juice = 4 + x
New amount of lime juice added = 3.2 + 0.3x
Also, new amount of lime juice = 0.5 * ( 4 + x)
3.2 + 0.3x = 0.5 * ( 4 + x)
0.2x = 1.2
x = 6 L
In conclusion, the volume to be added is obtained from the percent concentration.
Learn more about percent concentration at: https://brainly.com/question/19379932
#SPJ1
Classify the following alcohol as primary,
secondary or tertiary.
A. primary
ОН
B. secondary
C. tertiary
Enter
The classification of the alcohols gives;
Compound 1 - Primary alcoholCompound 2 - Tertiary alcoholCompound 3 - Secondary alcoholCompound 4 - Secondary alcoholWhat are alcohols?Organic compounds occurs in families. The family of compounds is called a homologous series. The homologous series always have a functional group. The functional group is the atom, group of atoms or bond that is responsible for the chemical reactivity of the members of a given homologous series.
Now we know that the alcohols are those organic compounds that contains the -OH group. The could be aliphatic or alicyclic compounds. We shall now proceed to name the kind of alcohols that each of the compounds shown are;
Compound 1 - Primary alcoholCompound 2 - Tertiary alcoholCompound 3 - Secondary alcoholCompound 4 - Secondary alcoholLearn ore about alcohols:https://brainly.com/question/4698220
#SPJ1
Calculate the freezing point depression for 1 kilogram of sodium chloride (NaCl) in 5 kilograms of
water. The Ky of water is -1.86 °C/m.
[tex]\\ \rm\dashrightarrow \Delta T_f=ik_fm[/tex]
m is molalityMoles of NaCl
1000/2343.4molMolality
43.4/58.68[tex]\\ \rm\dashrightarrow \Delta T_f=i(-1.86)(8.68)[/tex]
[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14i[/tex]
i is vant Hoff factor
For NaCl vant Hoff factor is 2( Actually 1.9)
[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14(2)=-32.28°C[/tex]
Moles of NaCl
[tex]\\ \tt{:}\dashrightarrow \dfrac{1000g}{23g/mol}[/tex]
[tex]\\ \tt{:}\dashrightarrow 43.4mol[/tex]
Find Molality
[tex]\boxed{\sf Molality=\dfrac{Moles\:of\:solute}{Volume \:of\: solution\:in\:kg}}[/tex]
Volume of solution=1kg+5kg=6kg[tex]\\ \tt{:}\dashrightarrow m=\dfrac{43.4}{6}=7.2m[/tex]
Vant Hoff factor
[tex]\\ \tt{:}\dashrightarrow NaCl\longrightarrow Na^++Cl^-[/tex]
i=2Freezing point depression
[tex]\\ \tt{:}\dashrightarrow \Delta T_f=iK_fm[/tex]
[tex]\\ \tt{:}\dashrightarrow \Delta T_f=2(-1.86)(7.2)[/tex]
[tex]\\ \tt{:}\dashrightarrow \Delta T_f=-26.7°C[/tex]
10.0 g of nickel is cooled to 2.0 °C and
placed into a sample of warm water.
The final temperature of the water and
nickel was 63.4 °C. How much energy
is absorbed by the nickel?
J
CNi = 0.120 g. C
9Ni = [?] J
Answer:
73.68 J
Explanation:
To find the energy absorbed by nickel, you need to use the following equation:
Q = mcΔT
In this equation,
-----> Q = energy (J)
-----> m = mass (g)
-----> c = specific heat (J/g°C)
-----> ΔT = change in temperature
The change in temperature is found by subtracting the initial temperature from the final temperature. You can plug the given values into the equation and simplify to find the energy absorbed.
m = 10.0 g
c = 0.120 J/g°C
ΔT = 63.4 °C - 2.0 °C = 61.4 °C
Q = mcΔT
Q = (10.0 g)(0.120 J/g°C)(61.4 °C)
Q = 73.68 J
For what mechanistic reason does g1 of lactase first act as a brønsted acid during catalysis?.
Answer: Carboxylation of hydroquinone
How many molecules of zinc oxide are there in a 2 kg (2,000 g) sample?
Answer:
1.48 x 10²⁵ molecules ZnO
Explanation:
To find the amount of molecules, you need to (1) convert grams to moles (via molar mass) and then (2) convert moles to molecules (via Avogadro's Number). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units.
Molar Mass (ZnO): 65.380 g/mol + 15.998 g/mol
Molar Mass (ZnO): 81.378 g/mol
Avogadro's Number:
6.022 x 10²³ molecules = 1 mole
2,000 g ZnO 1 mole 6.022 x 10²³ molecules
--------------------- x ----------------- x --------------------------------------- =
81.378 g 1 mole
= 1.48 x 10²⁵ molecules ZnO
When a water heater thermostat is set at 140 ° f or higher, a ______ should be installed to cool the water.
Tempering Valve should be installed to cool the water.
A tempering valve is also called an anti-scald valve.
The thermostat controls the temperature inside the tank between 120F to 140F.
A thermostat is just a switch that is actuated by temperature. The thermostat will activates one of the elements in response to a "request for heat" when it detects a water temperature below its predetermined point.
At 140 degrees F temperature water can cause a burn to the skin in five seconds.
The Tempering valve is the mixing chamber, where cold water is mixed with hot water.
It functions as a mixing device, mixing hot and cold water to generate the proper water temperature that is emitted from a certain outlet.
For a detailed study about the thermostat refer given link https://brainly.com/question/8312329.
#SPJ1.
Cesium sulfite is formed from the cs cation and the so2−3 anion. What is the correct formula for this compound?
Cesium Sulfite is formed from the Cs cation and the SO₃⁻² anion. The correct formula for this compound is Cs₂SO₃.
What is Cation ?Cations are positively charged ions. It forms when an element lose one or more electrons.
Anions are negatively charged ions. It form when an element gains one or more electrons.
Symbol Cs⁺¹ SO₃⁻²
Valency +1 -2
Formula of the compound is Cs₂SO₃.
Thus from the above conclusion we can say that Cesium Sulfite is formed from the Cs cation and the SO₃⁻² anion. The correct formula for this compound is Cs₂SO₃.
Learn more about the Cation and Anions here: https://brainly.com/question/20005547
#SPJ1
Which halogen or halogen-containing compound is typically used as a form of topical antisepsis?
The halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".
Iodine will be employed as an antiseptic in the manner of a tincture of iodine, essentially an alcoholic solution.
Iodophor would be an iodine-containing solution that also contains a solubilizing agent, like povidone or a surfactant. Iodophor would be a common sanitizer in the dairy but also brewing sectors. Generally, a high molecular weight carrier, commonly a polymer, has been polymerized with iodine.
Therefore, the halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".
To know more about antisepsis
https://brainly.com/question/15186144
#SPJ4
Which of the following is NOT a property of metals?
A - shiny
B - ductile
C - can be solids, liquids, or gases
D - malleable
Answer:
C - can be solids, liquids, or gases
Explanation:
Suppose a aqueous solution of phosphoric acid () is prepared. Calculate the equilibrium molarity of . You'll find information on the properties of phosphoric acid in the ALEKS Data resource.
The equilibrium molarity HPO²₄- = 6.2 x 10⁻⁸M See the explanation below.
What is Equilibrium Molarity?The molar concentration of a certain species in a solution is known as equilibrium molarity.
What is the calculation showing the above answer?
The initial concentration H₃PO₄ = 0.31 M
Kₐ₁ = 6.92 x 10⁻³ (See Image 1 attached)
Kₐ₁ = [H⁺][tex]_{eq}[/tex][H₂PO₄-][tex]_{eq}[/tex] / [H₃PO₄][tex]_{eq}[/tex]
6.92⁻³ x 10 = [(x) * (x)] / (0.31 M - x)
Solving for x, x = 0.043 M
[H+] = x = 0.043 M
[H₂PO₄-] = x = 0.043 M 0.0429805
Kₐ₂ = 6.2 x 10⁻⁸
See the second attached table
Kₐ₂ = [H+][tex]_{eq}[/tex] [HPO₄²-]eq / [H₂PO₄-]eq
6.2 x 10⁻⁸ = [(0.043 M + x) * (x)] / (0.043 M - x)
Solving for x, x = 6.2 x 10⁻⁸ M
[H₂PO₄-]eq = x = 6.2 x 10⁻⁸ M
Learn more about equilibrium molarity at;
https://brainly.com/question/14469428
#SPJ1
Sulfur has an oxidation number of +6 in which two formulas?
A. SO₂ and SO4²-
B. H₂SO4 and SO₂
C. SO3 and SO4²-
D. HSO4- and S₂03²-
[tex] \sf \blue{B. H_{2}SO4 \: and \: SO_{2}}[/tex]
Explanation:As we know in oxidation, oxygen is added and hydrogen is reduced. And in option B, we can observe that is oxygen added +6. So, we conclude that option B is valid.
Hope it help youHow many carbon monoxide molecules are in 0.75 moles of carbon monoxide?
Answer:
four 0.5 times 10 to the 23rd Adams of Neptune
Explanation:
Answer:
0.75 ( 6.02 × 10²³) = 4.515 x 10²³
Explanation:
0.75 ( 6.02 × 10²³) = 4.515 x 10²³
The Venn diagram shown below compares the nuclear reactions in the sun and nuclear power plants.
Picture shows two ovals which overlap in the middle. The oval on the left has the label 'Sun' on top and 'A' within it. The oval on the right has the label 'Nuclear power plants' on top and 'Splitting of atoms' within it. The overlapping portion has the label 'Release of energy' within it.
What process is best described by A?
Destruction of atoms
Fission of atoms
Fusion of atoms
Repulsion of atoms
The process which is best described by "A" in this Venn diagram is: C. fusion of atoms.
What is nuclear fusion?Nuclear fusion can be defined as a type of nuclear reaction that involves joining or combining two (2) smaller nuclei of atoms, so as to form a single heavier nucleus accompanied with the release of energy.
Based on the Venn diagram in the image attached below, we can logically deduce that the process which is best described by "A" is fusion of atoms.
Read more on nuclear fusion here: https://brainly.com/question/9903602
#SPJ1
a sodium hydroxide solution is 19 M. What will the strength of the solution formed if 25 ml of this NaOH solutio nis diluted to 5.0 Liters
the strength of the solution formed is 3.8.
What is the strength of the solution?The amount of solute dissolved in grammes per litre of the solution is used to determine the solution's strength. It stands for the solution's potency or concentration. It uses grammes per litre of expression.
Concentration of NaOH = 19 M
Initial volume of NaOH = 25 mL= 0.025 L
Moles of NaOH = 19*0.025
= 0.475 moles
Final volume of NaOH solution = 5 L
Final concentration = 0.475/5
= 0.095 M
so, the strength is 19/5
= 3.8
to know more about strength of the solution go to - https://brainly.com/question/15848974
#SPJ4
What is the change in entropy (AS) when a solid substance decomposes and
produces gaseous products?
Entropy directs to the degree of disorderliness in a system. Generally, solids have a greater degree of order when corresponded to gas in which the molecules/particles move randomly in all directions.
The transformation in entropy from solid to gaseous phase is a positive change. Because there is increase disorderliness of the system.
What is entropy definition?
A campfire is an illustration of entropy. The solid wood burns and becomes ash, smoke and gases, all of which applied energy outwards more efficiently than the solid fuel. Ice melting, salt or sugar dissolving, constructing popcorn and boiling water for tea are processed with growing entropy in your kitchen.
To learn more about Entropy, refer
https://brainly.com/question/6364271
#SPJ9
Calculate the concentration of a solution if 15 g of salt is added to 170 g of water.
Considering the definition of percentage by mass, the concentration of a solution if 15 g of salt is added to 170 g of water is 8.108 %.
Percentage by massThe percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.
In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]
Concentration of the solutionIn this case, you know:
mass of solute= 15 gmass of water= 170 gmass of solution= mass of solute + mass of water= 15 + 170 g= 185 gReplacing in the definition of percentage by mass:
[tex]percentage by mass=\frac{15 grams}{185 grams}x100[/tex]
Solving:
percent by mass= 8.108 %
Finally, the concentration of a solution if 15 g of salt is added to 170 g of water is 8.108 %.
Learn more about percentage by mass:
brainly.com/question/19168984
brainly.com/question/18646836
#SPJ1
Calculate and record the expected mass of benzoic acid required to react with 20.00 mL of a 0.100 M sodium hydroxide solution. Record the mass of benzoic acid using three significant digits to reference later.
The mass of benzoic acid is 0.244 g.
Here use the concept of molarity.
What is molarity?The amount of a substance in a specific volume of solution is known as its molarity (M). The moles of a solute per liter of a solution is known as molarity.
Molarity = no. of moles/volume (in L)
Calculation:Given,
Molarity, M = 0.100 M
Volume, V = 20.00 mL = 20.0 × 10⁻³
To calculate,
Mass of benzoic acid C₇H₆O₂ =?
We know that,
Molecular mass of benzoic acid, C₇H₆O₂ = 122
No. of moles = weight/ molecular mass
The formula is modified as,
Molarity = weight of cholesterol/ (molecular mass) (Volume)
Put the values in the formula,
0.100 = Mass of benzoic acid/ (122) (20 × 10⁻³)
Mass of benzoic acid = 0.100 (122)(20 × 10⁻³)
= 244 × 10⁻³
= 0.244 g
Hence, the mass of benzoic acid is 0.244 g.
Learn more about molarity here:
brainly.com/question/13386686
#SPJ4
Which of the following statements about the normal operation of nuclear fission reactors is accurate?
Select one:
a. They release large amounts of chemical pollutants into the air.
b. A small amount of fuel produces a large amount of energy.
c. The nuclear waste is quickly and safely disposed of at the reactor site.
d. The hot water surrounding the reactor core can be used to provide hot water for communities in the area.
Answer:
Explanation:
b
The reaction between calcium carbonate (CaCO3) and HCl produces calcium chloride (CaCl2), carbon dioxide (CO2), and water (H2O).What happens when the concentration of hydrogen chloride (HCl) molecules is doubled in this reaction?
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
When the hydrogen chloride concentration doubles, the number of collisions between the reactants
, which causes the rate of the forward reaction to
.
When the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster.
What is the rate of a reaction?The rate of a reaction is how fast a chemical reaction occurs i.e. the conversion of reactants to products.
The rate of a chemical reaction can be influenced by certain factors including the concentration of reactants.
The more the concentration of a reactant, the more the collision between the reactants and hence, the faster the reaction will proceed.
Therefore, when the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster
Learn more about rate of reaction at: https://brainly.com/question/8592296
#SPJ1
Answer:1. increases 2. increases
Explanation:
Got it right on plato!
what discovery was found by Nels Bohr model of atom ?
Answer:
What was Niels Bohr's most important discovery? Niels Bohr proposed a model of the atom in which the electron was able to occupy only certain orbits around the nucleus. This atomic model was the first to use quantum theory, in that the electrons were limited to specific orbits around the nucleus.
Explanation:
Subjects Of Study: atomic model
A first-order reaction is 81omplete in 264s. A. What is the half-life for this reaction? b. How long will it take for the reaction to reach 95ompletion?
A first-order reaction is 81omplete in 264s.The half-life for this reaction (i) t 1/2 = =3.465×10 −3 s.to reach 95% Completion = 285 s.
To measure reaction rates, chemists initiate the reaction, measure the concentration of the reactant or product at different times as the reaction progresses,
For a 0-order response, the mathematical expression that may be employed to determine the half of life is: t1/2 = [R]0/2k. For a first-order reaction, the half of-existence is given by: t1/2 = zero.693/ok. For a 2d-order response, the method for the half-life of the response is: 1/okay[R]0
The 1/2-life of a response (t1/2), is the quantity of time needed for a reactant concentration to lower via half of compared to its initial awareness. Its software is used in chemistry and medicine to are expecting the awareness of a substance over time
Half of the lifestyles is the time required for exactly 1/2 of the entities to decay 50%.
Learn more about first-order reaction here:- https://brainly.com/question/518682
#SPJ4