Using Company A's calling plan, the cost of an overseas phone call is a $0.95 connection fee plus 33 cents
per minute. If the total cost of the call is $11.84, how long is the phone call?
minutes

The critical value of f for an upper-tail test at a 0.05 significance level is 2.94.

The critical value of F for an upper-tail test at a 0.05 significance level with a sample size of 21 for the sample with the smaller variance and a sample size of 9 for the sample with the larger variance can be found using an F-distribution table or calculator.

Using an F-distribution table or calculator with numerator degrees of freedom (df1) of 8 and denominator degrees of freedom (df2) of 20 (since df1 is for the sample with the larger variance and df2 is for the sample with the smaller variance), the critical value of F at the 0.05 significance level is approximately 2.94.

Therefore, the answer is a. 2.94.

The complete question is:-

The critical value of F for an upper-tail test at a 0.05 significance level when there is a sample size of 21 for the sample with the smaller variance and there is a sample size of 9 for the sample with the larger sample variance is _____. a. 2.94 b. 2.45 c. 2.10 d. 2.37

To learn more about the upper-tail test, refer:-

https://brainly.com/question/17204018

#SPJ4

Maximum: 1, Minimum: -3, Midline y = -1, Amplitude = 4, Period = π, Frequency = 1/π,  equation -4cos(2x) + 1:

Sinusoidal Functions

It refers to the oscillating functions like the sine or cosine which range from a minimum and maximum value periodically.

The graph shown can give us all the information we need to answer these questions:

Maximum: 1

Minimum: -3

The midline goes through the center value (mean) of the max and min values, i.e.

Equation of the midline:

y = (1-3)/2

y = -1

Amplitude is the difference between the maximum and minimum values

A =4

The period is the time it takes to complete a cycle. We can see the minimum value is first reached at x=0 and next at  x = π

Thus the period is

T = π

The frequency is the reciprocal of the period:

f = 1/T = 1/π

The angular frequency is

ω = 2πf

ω = 2

The equation of the function is a negative cosine (since it starts at the minimum) or a shifted sine or cosine. We'll choose the negative cosine, knowing all the parameters:

f(x) = -4cos(2x) + 1

Learn more about sinusoidal function at:
https://brainly.com/question/21008165

#SPJ1

Answer:

$25.08

Step-by-step explanation:

7.6% = 0.076

We take

330 times 0.076 = $25.08

You will pay $25.08 sale tax.

The value of the composition function ( f + g ) ( x ) = x²³ - 3x + 2

Evaluation of a function at the value of another function is known as Composition of function. A function composition is a process in which two functions, f and g, form a new function, h, in such a way that h(x) = g(f(x)). This signifies that function g is being applied to the function x. So, in essence, a function is applied to the output of another function.

Given data ,

Let the first function be represented as f ( x )

Now , the value of f ( x ) = -3x + 2

Let the second function be represented as g ( x )

Now , the value of g ( x ) = x²³

On simplifying , we get

The value of ( f + g ) ( x ) = f ( x ) + g ( x )

Substituting the values of f ( x ) and g ( x ) , we get

( f + g ) ( x ) = x²³ - 3x + 2

Hence , the composition function is ( f + g ) ( x ) = x²³ - 3x + 2

To learn more about composition of functions click :

https://brainly.com/question/17673639

#SPJ9

Answer: If each drink is 8.64 fluid ounces and Gwen is pouring 48 drinks, then the total amount of fluid ounces she poured is 8.64 fluid ounces * 48 drinks = 413.12 fluid ounces.

Step-by-step explanation:

The correct option for the percent of the unshaded area of the circle is (3). 64%.

The area of a circle is π multiplied by the square of the radius. The area of a circle(A) when the radius 'r' is given is πr².

A = πr²

π = 3.14

Area of the bigger circle = 3.14 × 5 × 5

Area of the bigger circle = 78.5

Area of the smaller circle = 3.14 × 3 × 3

Area of the smaller circle = 28.26

Area of the unshaded region of the circle = 78.5 - 28.26

Area of the unshaded region of the circle = 50.24

percent of the unshaded region = (50.24 × 100)/78.5

percent of the unshaded region = 64%

Therefore, the percent of the unshaded area of the circle is equal to 64%.

Know more about area here:https://brainly.com/question/76387

#SPJ1

Answer:

960 miles

Step-by-step explanation:

just multiply by 48x20=960

The total number of arrangements in which the elements of [n] alternate between even and odd numbers are:

(n/2)! * (n/2)! if n is odd

(n/2)! * (n/2-1)!! if n is even

The initial number in the permutation must be odd if n is odd. There are n/2 ways to organize the odd numbers and n/2 ways to arrange the even numbers because there are (n/2)! odd numbers and n/2 even numbers. There is only one way to determine the sequence in which odd and even numbers occur because they must alternate. As a result, there are (n/2)!*(n/2)! viable permutations in total.

The number of odd and even numbers is equal if n is even. There are n/2 options for the initial number since we can choose any odd number to be the first number in the permutation. The second slot thus has options for (n/2 - 1) even numbers, the third position has options for (n/2 - 1) odd numbers, and so on.

Therefore, the total number of valid permutations is (n/2) * (n/2 - 1) * (n/2 - 1) * ... * 1, which can be written as (n/2)! * (n/2-1)!!.

Thus, the total number of arrangements in which the elements of [n] alternate between even and odd numbers are:

(n/2)! * (n/2)! if n is odd

(n/2)! * (n/2-1)!! if n is even

To learn more about permutations, visit the link below:

https://brainly.com/question/29855401

#SPJ4

The two methods of finding the quotient are flipping the divisor and then multiplying and the second one is converting the fractions into decimals and dividing them.

Fractions describe the part of something present out of the total amount.

here, we have,

We know that the result of diving a fraction by a fraction is the same as multiplying that fraction by the reciprocal of the divisor.

∴ (3/8) ÷ (3/4) is,

= (3/8) × (4/3).

= 4/8.

= 1/2.

The second method is converting the fractions into decimals and then dividing them in a conventional way.

3/8 = 0.375

and 3/4 = 0.75.

∴ 0.375 ÷ 0.75 is,

= 0.5.

learn more about fractions here :

brainly.com/question/10354322

#SPJ1

From the directions, It seems that you are working on a project related to hypothesis testing for NBA data. To complete the project, you need to perform several hypothesis tests for population parameters and write a summary report explaining your findings.

The first task is to submit a Python script that includes all the necessary code to perform the hypothesis tests. You can use the Jupyter notebook provided in the project to write the code. The notebook contains step-by-step instructions and code blocks that will help you complete the tasks.

The second task is to write a summary report that includes an introduction, hypothesis tests for the population mean, hypothesis test for the population proportion, hypothesis test for the difference between two population means, and a conclusion.

In the introduction, you should set the context for your scenario and explain the purpose of your analysis. You should also provide an overview of the data and the hypothesis tests you will be performing.

In the hypothesis tests for the population mean, you will need to discuss all the steps of the hypothesis test, including formulating the null and alternative hypotheses, selecting the significance level, calculating the test statistic, determining the p-value, and interpreting the results.

In the hypothesis test for the difference between two population means, you will need to discuss all the steps of the hypothesis test, including formulating the null and alternative hypotheses, selecting the significance level, calculating the test statistic, determining the p-value, and interpreting the results.

Finally, in the conclusion, you should summarize your findings and explain their practical implications. You should also discuss any limitations of your analysis and suggest future research directions.

To know more about hypothesis tests:

https://brainly.com/question/30588452

#SPJ4

The Price for one slice pizza is $1.25 and for one drink is $2.25.

Equations are mathematical statements with two algebraic expressions flanking the equals (=) sign on either side.

It demonstrates the equality of the relationship between the expressions printed on the left and right sides. LHS = RHS is a common mathematical formula.

Coefficients, variables, operators, constants, terms, expressions, and the equal to sign are some of the components of an equation. The "=" sign and terms on both sides must always be present when writing an equation.

Given:

Jim ordered a sports drink and three slices of pizza for $8.50.

His friend ordered two sports drinks and two slices of pizza for $8.00.

let the price for pizza be $ and for one drink is $y.

So, the system of equation is

x + 3y = 8.5....(1)

2x+ 2y= 8......(2)

Solving above two equations we get

2(8.5- 3y) + 2y= 8

17 - 6y + 2y= 8

-4y = -9

y= 9/4

y= 2.25

and, x= 8.5- 3(2.25)= 8.5- 6.75 = $1.25

Learn more about Equation here:

https://brainly.com/question/29657992

#SPJ1

Answer:

M--------------N

S---------------T

Step-by-step explanation:

Parallel means that no matter how far they extend they will never touch

The solution of the system is equal to u, u is in the plane [tex]R^3[/tex].

Augmented matrix for Exercise 11:

[1 2 4 -2 0 1 5 9 -3]

The solution is: x = 2, y = -3, z = 1

Augmented matrix for Exercise 12:

[1 2 1 0 -3 -1 5 -1 3]

The solution is: x = -1, y = 6, z = -2

To determine if u = [0 4 4] is in the plane [tex]R^3[/tex], we need to find the solution of the system of linear equations formed by the augmented matrix:

[3 -5 -2 0 6 1 4 1 1]

Solving this system, we find that x = 0, y = 4, z = 4. Since the solution of the system is equal to u, u is in the plane [tex]R^3[/tex].

Learn more about Augmented matrix here:

https://brainly.com/question/16796667

#SPJ4

Answer: See attached.

Step-by-step explanation:

   We will input the given x-values and solve for y by substituting x for the values in the original function, h(x)=2x-2.

h(-5) = 2(-5)-2 = -12

h(-1) = 2(-1)-2 = -4

h(1) = 2(1)-2 = 0

h(2) = 2(2)-2 = 2

[tex]f(x)=3x+2+x[/tex] find f(2)

Substitute:

[tex]f(2)=3(2)+2+(2)[/tex]

[tex]f(2)=6+2+2[/tex]

[tex]\fbox{f(2) = 10}[/tex]

Brad will need to pay 34% of the car's original value  as part of his lease.

The residual value of the car after three years is $18,900

PART 1

To find the percentage of the car's original value that Brad will need to pay as part of his lease, we need to calculate the difference between the original value and the residual value (the value of the car at the end of the lease) and express it as a percentage of the original value. Here's how to do it:

difference = $34,000 - $22,600 = $11,400

Express the difference as a percentage of the original value:

($11,400 / $34,000) x 100% = 34%

Therefore, Brad will need to pay approximately 34% of the car's original value as part of his lease. Rounded to the nearest whole number, this is 34%.

PART 2

The residual value of the car after three years can be found by multiplying the original MSRP by the percentage of its value that it will retain after three years. Here's how to do it:

Find the value the car will retain after three years:

residual value = 70% of $27,000 = 0.70 x $27,000 = $18,900

Therefore, the residual value of the car after three years will be $18,900.

Learn more about percentage on:

https://brainly.com/question/29401226

#SPJ1

2.4 cups of milk were used.

A fraction represents a part of a whole.

Let's start by figuring out how much of a gallon was used for coffee:

1/4 of a gallon = (1/4) x 1 gallon = 0.25 gallons

2/5 of a gallon = (2/5) x 1 gallon = 0.4 gallons

So, 0.25 gallons of the 0.4 gallons were used for coffee

Remaining amount of the 0.4 gallons was used for milk:

0.4 - 0.25 = 0.15 gallons

Now, we need to convert 0.15 gallons to cups.

One gallon is equal to 16 cups

0.15 gallons = 0.15 x 16 cups/gallon = 2.4 cups

Therefore, 2.4 cups of milk were used.

To learn more on Fractions click:

https://brainly.com/question/10354322

#SPJ9

Answer: Since IK and LN are parallel lines, then mIJM and mNMJ are supplementary, meaning that they add up to 180 degrees. Therefore, mIJM = 180° - mNMJ = 180° - 116° = 64°.

Step-by-step explanation:

The number is the sample deviation, on average 5.5 units from the mean.

The two key areas in statistics are variance and standard deviation. It is a metric for statistical data dispersion. The degree to which values in a distribution deviate from the distribution's average is known as dispersion. The following measurements can be used to determine the extent of the variation:

Range

Quartile Deviation

Mean Deviation

Standard Deviation

Suppose we compute and find that it is equal to 5.5. How do we interpret this number

The number is the sample deviation, on average 5.5 units from the mean.

learn more about sample deviation,

https://brainly.com/question/24277447

#SPJ4

Answer:

A, C, E

Step-by-step explanation:

TAN = sin / cos

now use algrebra tonsolve the other equations.

B is the value for CoTangent. not tangent.

C is true. multiply both sides by cos

D is false.

E is true. dividing by sin then requires the inverse ratio. which flips fractions on both sides.

The length of DB in rectangle ABCD is √{5x² + 38x + 106}.

In a right-angled triangle, the sum of the squares of the smaller two sides of a right-angle triangle is equal to the square of the largest side.

Given, Polygon ABCD is a rectangle, AE = 4x + 10 and EC = 2x + 18.

Here DB is the diagonal of the rectangle ABCD.

Therefore,

DB = √(AE² + EC²).

DB = √{(4x + 10)² + (2x + 18)²}.

DB = √{16x² + 80x + 100 + 4x² + 72x + 324}.

DB = √{20x² + 152x + 424}.

DB = √{5x² + 38x + 106}.

learn more about rectangles here :

https://brainly.com/question/29123947

#SPJ9

Assuming that the coefficient of restitution follows a normal distribution, we can use the z-score associated with a 95% confidence level, which is approximately 1.96.

to find the margin of error for the sample mean. Since we want to find an interval that contains 99% of the values, we need to include ±2.5% on both sides of the mean. Thus, the interval can be calculated as follows:

Interval = sample mean ± z-score * (standard deviation / square root of sample size)

Since we do not have information about the mean or standard deviation of the coefficient of restitution, we cannot provide a specific interval. However, if we assume that the standard deviation is 0.1, we can use a rule of thumb that a sample size of at least 30 is required to use the central limit theorem and assume normality. Then, the interval would be:

Interval = sample mean ± 1.96 * (0.1 / square root of 30)

Note that this is just an example, and the interval will depend on the actual sample mean and standard deviation of the coefficient of restitution.

You can read more about the coefficient of restitution at https://brainly.com/question/2795148#:

#SPJ4

The area of the composite figure consists in the sum of the areas of two rectangles, two triangles and a semicircle.

In this problem we find the representation of a composite figure HJKLMNOP, whose area can be determined as the sum of area of different figures. We find the areas of the following figures herein:

Triangle

A = 0.5 · w · l

Rectangle

A = w · l

Semicircle

A = 0.5π · r²

Where:

The composite figure is the result of summing the areas of two rectangles, two triangles and a semicircle.

To learn more on composite figures: https://brainly.com/question/30488703

#SPJ1

The equation of the exponential regression is y = 17100[tex]e^{-0.194x}[/tex] and the value of a car after 12 years is $1667

It is a model that explains processes that experiences growth at a double rate. It is used for situations where the growth begins slowly but rapidly speeds up without bounds or where the decay starts rapidly but slows down to get to zero.

Given that, the given table shows the value of a car over time that was purchased for 14100 dollars, where x is years and y is the value of the car in dollars.

We need to find the exponential regression equation for this set of data,

We know that,

The exponential regression equation is : y = A₀eᵃˣ

Where A₀ is the coefficient of exponential regression and a is the constant.

For x = 0, the value of y will be $17100.

Therefore,

17100 = A₀e⁰

A₀ = 17100

Therefore, the equation will be =

y = 17100eᵃˣ

Find for a,

For x = 1, the value of y will be $14090.

14090 = 17100eᵃ

eᵃ = 14090/17100

Taking ln both sides, then we have,

a lne = -0.194

a = -0.194

Therefore, the exponential regression equation for this set of data is :

y = 17100[tex]e^{-0.194x}[/tex]

Finding the value of the car, after 12 years =

y = 17100[tex]e^{-0.194(12)[/tex]

y = 1667

Hence, the equation of the exponential regression is y = 17100[tex]e^{-0.194x}[/tex] and the value of a car after 12 years is $1667

Learn more about exponential regression, click;

https://brainly.com/question/22698078

#SPJ9

If the height of the triangle is increased by a factor of 4 , then (b) The area will increase by a factor of 4 .

The Area of a triangle is : Area = (1/2)×b×h,

Where base of triangle = b  and  height of triangle = h ;

In this case, the base of triangle is = 20m and

the height of triangle is = 10m,

So the area of the triangle is ⇒ A = (1/2)×20m×10m = 100m² ;

If the height of the triangle is increased by a factor of 4, the new height will be 4 times the original height,

Which is ⇒ h' = 4×h = 4×10m = 40m ;

The base of triangle remains that is = 20m.

So, the new area of the triangle is : A' = (1/2)×20m×40m = 400m² ;

On Comparing  New area(A') to the Original area(A),

We get ; A'/A = 400/100 = 4 ;

Therefore, the area of the triangle has increased by a factor of 4.

Learn more about Triangle here

https://brainly.com/question/19305981

#SPJ4

The given question is incomplete , the complete question is

The dimensions of a triangle are base = 20m  , height = 10m . If the height of the triangle is increased by a factor of 4,

Which statement will be true about the area of the triangle ?

(a) The area will increase by a factor of 2

(b) The area will increase by a factor of 4

(c) The area will increase by a factor of 8

(d) The area will not change .

Answer:

the area will increase by

Step-by-step explanation:

The.average bone density for the sample will be: C.31 g/cm³

Based on the information, it should be noted that the average bone density for sample 1 will be:

= 6.8 / 22.6

= 0.3

It should be noted that the average bone density for sample 2 will be:

= 1.7 / 5.4

= 0.32

It should be noted that the average bone density for sample 3 will be:

= 3.6 / 11.3

= 0.32

It should be noted that the average bone density for sample 4 will be:

= 5.2 / 17.4

= 0.3

The average bone density for the sample will be:

= (0.3 + 0.32 + 0.32 + 0.3) / 4

= 0.31 g/cm³

Learn more about mean on:

brainly.com/question/1136789

#SPJ1

if cot(θ)<0 and cos(θ)<0, then we can conclude that θ lies in the second quadrant.

What is trigonometry functions ?

Trigonometry functions are a set of mathematical functions that relate the angles of a triangle to the lengths of its sides. The three main trigonometric functions are sine, cosine, and tangent, which are commonly abbreviated as sin, cos, and tan. These functions can be defined as ratios of the sides of a right triangle.

In a right triangle, the side opposite an acute angle is called the "opposite" side, the side adjacent to the angle is called the "adjacent" side, and the hypotenuse is the side opposite the right angle. With this terminology, we can define the following trigonometric functions:

Sine (sin): The sine of an angle is the ratio of the length of the opposite side to the length of the hypotenuse. In other words, sin(θ) = opposite/hypotenuse.

Cosine (cos): The cosine of an angle is the ratio of the length of the adjacent side to the length of the hypotenuse. In other words, cos(θ) = adjacent/hypotenuse.

Tangent (tan): The tangent of an angle is the ratio of the length of the opposite side to the length of the adjacent side. In other words, tan(θ) = opposite/adjacent.

There are also three reciprocal trigonometric functions: cosecant (csc), secant (sec), and cotangent (cot). These functions are the reciprocals of sine, cosine, and tangent, respectively.

Trigonometric functions have many practical applications in fields such as engineering, physics, and astronomy, where they are used to solve problems involving angles and distances. They also have many applications in pure mathematics, such as in the study of periodic functions and Fourier analysis.

According to given information :

To understand why θ must be in the second quadrant, we need to recall the signs of the trigonometric functions in each quadrant.

In the first quadrant, all trigonometric functions are positive.

In the second quadrant, sine is positive and cosine is negative.

In the third quadrant, both sine and cosine are negative.

In the fourth quadrant, sine is negative and cosine is positive.

Since we know that cos(θ) is negative, we can conclude that θ lies in either the second or third quadrant. However, since cot(θ) = cos(θ)/sin(θ) and cot(θ) is negative, we know that cos(θ) and sin(θ) must have opposite signs. In the third quadrant, both cos(θ) and sin(θ) are negative, so their quotient cot(θ) would be positive, which is not the case.

Therefore, we can conclude that θ lies in the second quadrant.

To know more about trigonometry functions visit:

https://brainly.com/question/25618616

#SPJ1

Answer:

If  cot(θ)<0 and cos(θ)<0, then we can conclude that θ lies in the second quadrant.

What are trigonometry functions ?

Trigonometry functions are a set of mathematical functions that relate the angles of a triangle to the lengths of its sides. The three main trigonometric functions are sine, cosine, and tangent, which are commonly abbreviated as sin, cos, and tan. These functions can be defined as ratios of the sides of a right triangle.

In a right triangle, the side opposite an acute angle is called the "opposite" side, the side adjacent to the angle is called the "adjacent" side, and the hypotenuse is the side opposite the right angle. With this terminology, we can define the following trigonometric functions:

Sine (sin): The sine of an angle is the ratio of the length of the opposite side to the length of the hypotenuse. In other words, sin(θ) = opposite/hypotenuse.

Cosine (cos): The cosine of an angle is the ratio of the length of the adjacent side to the length of the hypotenuse. In other words, cos(θ) = adjacent/hypotenuse.

Tangent (tan): The tangent of an angle is the ratio of the length of the opposite side to the length of the adjacent side. In other words, tan(θ) = opposite/adjacent.

There are also three reciprocal trigonometric functions: cosecant (csc), secant (sec), and cotangent (cot). These functions are the reciprocals of sine, cosine, and tangent, respectively.

Trigonometric functions have many practical applications in fields such as engineering, physics, and astronomy, where they are used to solve problems involving angles and distances. They also have many applications in pure mathematics, such as in the study of periodic functions and Fourier analysis.

According to given information :

To understand why θ must be in the second quadrant, we need to recall the signs of the trigonometric functions in each quadrant.

In the first quadrant, all trigonometric functions are positive.

In the second quadrant, sine is positive and cosine is negative.

In the third quadrant, both sine and cosine are negative.

In the fourth quadrant, sine is negative and cosine is positive.

Since we know that cos(θ) is negative, we can conclude that θ lies in either the second or third quadrant. However, since cot(θ) = cos(θ)/sin(θ) and cot(θ) is negative, we know that cos(θ) and sin(θ) must have opposite signs. In the third quadrant, both cos(θ) and sin(θ) are negative, so their quotient cot(θ) would be positive, which is not the case.

Therefore, we can conclude that θ lies in the second quadrant.

To know more about trigonometry functions visit:

brainly.com/question/25618616

#SPJ1