Answer:
Below
Explanation:
SO the equal but opposite force of the bullet being fired forward doesn't cause the backward force of the rifle to slam into his shoulder possibly causing injury
A hunter always presses the butt of a rifle tightly against his shoulder before firing a bullet because this causes a change in the momentum of the bullet being fired.
What is Newton's second law of motion?Newton's second law of motion states that the rate of change of momentum of a body is directly proportional to the force which is applied to it and the change in momentum of an object takes place in the direction in which the force is being applied.
The acceleration of an object as produced through a net force is directly proportional to the magnitude of the net force, in the same direction as that of the net force, and inversely proportional to the mass of the object.
The butt of the rifle is pressed tightly against the shoulder of the hunter to cause a change in the momentum of the bullet.
Learn more about Newton's law here:
https://brainly.com/question/15280051
#SPJ2
The earth's magnetic field strength is 5.0x10^-5 T. How fast would you have to drive your car to create a 4.0Vmotional emf along your 1.0m-long radio antenna? Assume that the motion of the antenna is perpendicular to\vec {B}
The car would have to be driven at a speed of 8.0x[tex]10^4[/tex] m/s to create a 4.0 V motional emf along the 1.0 m-long radio antenna perpendicular to the earth's magnetic field.
To calculate the speed required to create a 4.0 V motional emf along a 1.0 m-long radio antenna perpendicular to the earth's magnetic field, we can use the equation:
emf = Blv
Where emf is the motional emf, B is the magnetic field strength, l is the length of the antenna, and v is the velocity of the antenna.
Substituting the given values, we have:
4.0 V = (5.0x[tex]10^-^5[/tex] T)(1.0 m)(v)
Solving for v, we get:
v = 8.0x[tex]10^4[/tex]m/s
Therefore, the car would have to be driven at a speed of 8.0x[tex]10^4[/tex] m/s to create a 4.0 V motional emf along the 1.0 m-long radio antenna perpendicular to the earth's magnetic field. This speed is much greater than the speed of sound and is impossible to achieve with current technology.
To know more about magnetic field refer here :
https://brainly.com/question/7802337
#SPJ11
true/false. art-ranking activity: myogram of a twitch contraction
The given statement " art-ranking activity: myogram of a twitch contraction" is false because myogram is a recording of the electrical activity produced by skeletal muscle fibers during contraction.
A myogram is a recording of the electrical activity produced by skeletal muscle fibers during contraction. The myogram of a twitch contraction shows the sequence of events that occur during a single muscle contraction, including the latent period, contraction phase, and relaxation phase.
In contrast, an art-ranking activity involves the evaluation and ranking of artistic works based on subjective criteria such as aesthetic appeal, creativity, and originality. It is not related to the measurement of physiological parameters such as muscle activity.
Therefore, the statement "art-ranking activity: myogram of a twitch contraction" is false, as these two concepts are unrelated.
To learn more about myogram here
https://brainly.com/question/27961573
#SPJ4
An electromagnetic wave with a frequency of 5.50×1014 hz propagates with a speed of 2.13×108 m/s in a certain piece of glass.
a. Find the wavelength of the wave in the glass.
b. Find the wavelength of a wave of the same frequency propagating in air.
c. Find the index of refraction of the glass for an electromagnetic wave with this frequency.
d. Find the dielectric constant for glass at this frequency, assuming that the relative permeability is unity.
An electromagnetic wave with a frequency of 5.50×1014 hz propagates with a speed of 2.13×108 m/s in a certain piece of glass.
To find the wavelength of the wave in the glass.
a. The wavelength of the wave in the glass can be found using the formula λ = c/f, where λ is the wavelength, c is the speed of light in the medium (in this case, glass), and f is the frequency of the wave. Plugging in the given values, we get:
λ = 2.13×10^8 m/s / 5.50×10^14 Hz
λ = 0.387 μm (or 387 nm)
b. To find the wavelength of a wave of the same frequency propagating in air, we can use the same formula as above, but with the speed of light in air (which is approximately 3.00×10^8 m/s):
λ = 3.00×10^8 m/s / 5.50×10^14 Hz
λ = 0.545 μm (or 545 nm)
c. The index of refraction (n) of the glass for an electromagnetic wave with this frequency can be found using the formula n = c/v, where c is the speed of light in a vacuum (3.00×10^8 m/s) and v is the speed of light in the medium (in this case, glass). Plugging in the given values, we get:
n = 3.00×10^8 m/s / 2.13×10^8 m/s
n = 1.41
d. The dielectric constant (εr) for glass at this frequency can be found using the formula εr = n^2, where n is the index of refraction. Plugging in the value of n that we found in part c, we get:
εr = (1.41)^2
εr = 1.99 (or approximately 2.00)
For more question on frequency
https://brainly.com/question/254161
#SPJ11
The dielectric constant for glass at this frequency is approximately 1.98. To find the dielectric constant for glass at a frequency of 5.50×1014 hz, we need to use the formula ε = c^2/(μrν^2).
where ε is the dielectric constant, c is the speed of light in vacuum, μr is the relative permeability (which is assumed to be unity), and ν is the frequency of the electromagnetic wave in the glass. We are given that the speed of the wave in the glass is 2.13×108 m/s, so we can substitute that value for c, and the given frequency for ν. Plugging in the values and solving for ε, we get ε = 7.92. This means that the glass has a dielectric constant of 7.92 at a frequency of 5.50×1014 hz, which indicates how much the glass affects the electric field of the electromagnetic wave passing through it.
To learn more about dielectric constant click here:brainly.com/question/13265076
#SPJ11
According to Boundary Layer theory, what parameters are not used in determining the Reynolds Number?
a. Free stream velocity
b. Distance downstream
c. Angle of attack
d. All of the above
According to Boundary Layer theory, the parameters that are used in determining the Reynolds number are the characteristic length, fluid density, and fluid viscosity.
The Reynolds number is a dimensionless quantity used to predict the flow regime of a fluid and is based on these three parameters. The free stream velocity, distance downstream, and angle of attack are not used in determining the Reynolds number.
The free stream velocity refers to the velocity of the fluid far away from the object being studied and is not a parameter used in determining the Reynolds number. Similarly, the distance downstream and angle of attack are both related to the specific geometry and orientation of the object, and are not considered in the calculation of the Reynolds number.
The Reynolds number is an important concept in fluid mechanics as it helps to predict the transition from laminar to turbulent flow. According to Boundary Layer theory, the parameters that are used in determining the Reynolds number are the characteristic length, fluid density, and fluid viscosity. When the Reynolds number is less than a certain critical value, the flow is considered laminar, while above this value the flow becomes turbulent. This information is crucial in the design and analysis of various engineering applications, such as aircraft wings, heat exchangers, and pipelines.
learn more about length
https://brainly.com/question/17262298
#SPJ11
part 1 let h be the set of all vectors of the form 7t 3t 9t . find a vector v in ℝ3 such that h=span{v}. why does this show that h is a subspace of ℝ3?
The set h, consisting of vectors of the form (7t, 3t, 9t), is a subspace of R³. This is shown by finding a vector v in R³ that spans the set h. To find a vector v in R³ that spans the set h, we can choose a vector with the same form as the vectors in h.
Let's take v = (7, 3, 9). It is clear that any vector of the form (7t, 3t, 9t) can be obtained by scaling the vector v by a scalar t. Therefore, v spans the set h, meaning that every vector in h can be expressed as a scalar multiple of v.
This demonstrates that h is a subspace of R³ because it satisfies the two requirements for being a subspace: closure under addition and closure under scalar multiplication.
Since any vector in h can be expressed as a scalar multiple of v, it is closed under scalar multiplication. Additionally, if we take two vectors in h, say (7t₁, 3t₁, 9t₁) and (7t₂, 3t₂, 9t₂), their sum can be expressed as (7(t₁ + t₂), 3(t₁ + t₂), 9(t₁ + t₂)), which is also a vector in h. Hence, h is closed under addition.
By finding a vector v that spans h and verifying the closure properties, we establish that h is indeed a subspace of R³.
Learn more about vectors here :
https://brainly.com/question/24853230
#SPJ11
Calculate the resonance time of fly ash particle (d=3.1 um; P=1.5 g/mL) that is released from a 300-meter smokestack. How far will this particle travel if average wind speed is 8.4 miles/hr.
The resonance time is 2.61x10⁻⁵ seconds. The fly ash particle will travel approximately 0.128 mm before settling out of the air.
The resonance time of a particle in air is the time taken for the particle to settle out of the air due to gravity. The equation for the resonance time is given by:
t = (18πμd²)/(gρp)
where μ is the viscosity of air, d is the diameter of the particle, g is the acceleration due to gravity, and ρp is the density of the particle.
For a fly ash particle with a diameter of 3.1 μm and a density of 1.5 g/mL, the resonance time can be calculated as:
t = (18π(1.81x10⁻⁵)(3.1x10⁻⁶)²)/(9.81(1.5x10³))
t = 2.61x10⁻⁵ seconds
To calculate the distance traveled by the particle, we need to convert the wind speed from miles per hour to meters per second. 8.4 miles per hour is equivalent to 3.75 meters per second.
The distance traveled by the particle can be calculated using the equation:
d = ut + (1/2)at²
where u is the initial velocity (0), a is the acceleration due to gravity (-9.81 m/s²), and t is the time taken for the particle to settle out of the air (resonance time).
d = 0 + (1/2)(-9.81)(2.61x10⁻⁵)
d = 1.28x10⁻⁴ meters = 0.128 mm
To learn more about resonance time click on,
https://brainly.com/question/29438637
#SPJ4
by what factor does the nucleon number of a nucleus have to increase in order for the nuclear radius to increase by a factor of 2?
To answer your question, the nuclear radius (R) is proportional to the cube root of the nucleon number (A) according to the empirical formula R = R₀A^(1/3), where R₀ is a constant.
If the nuclear radius increases by a factor of 2, then the new radius is 2R = R₀(A')^(1/3), where A' is the new nucleon number.
Dividing the equations, we get 2 = (A'/A)^(1/3).
Cubing both sides, we find that the nucleon number has to increase by a factor of 8 (2^3) for the nuclear radius to increase by a factor of 2.
Learn more about equation at
https://brainly.com/question/3594594
#SPJ11
A raft is 3.7 m wide and 6.1 m long. When a horse is loaded onto the raft, it sinks 3.7 cm deeper into the water.
What is the weight of the horse? (in kN)
If the raft is 3.7m wide and 6.1m long and sinks 3.7cm deeper into the water when a horse is loaded will be 0.084 kN.
To calculate the weight of the horse, we can use Archimedes' principle, which states that the buoyant force on an object submerged in a fluid is equal to the weight of the displaced fluid.
Assuming the density of water is 1000 kg/[tex]m^3[/tex], the volume of water displaced by the raft and the horse can be calculated as follows:
Volume of water displaced = length x width x height = 6.1 m x 3.7 m x 0.037 m = 0.085 [tex]m^3[/tex]
The weight of the displaced water is then:
Weight of displaced water = density x volume x gravity = 1000 kg/[tex]m^3[/tex] x 0.085 [tex]m^3[/tex] x 9.81 m/[tex]s^2[/tex] = 83.6 N
Since the buoyant force acting on the horse is equal to the weight of the displaced water, we can use this value to calculate the weight of the horse as follows:
Weight of horse = weight of displaced water = 83.6 N
To convert to kN, we divide by 1000:
Weight of horse = 83.6 N ÷ 1000 = 0.084 kN
Therefore, the weight of the horse is approximately 0.084 kN.
For more such answers on weight
https://brainly.com/question/2514811
#SPJ11
To solve this problem, we need to use Archimedes' principle which states that the weight of the displaced water is equal to the weight of the object.
First, let's find the volume of water displaced by the raft with the horse on it:
Volume = width x length x depth
Volume = 3.7m x 6.1m x 0.037m (converted cm to m)
Volume = 0.8538 m^3
Next, we need to find the weight of the water displaced:
Weight of water = density x volume x gravity
Density of water = 1000 kg/m^3
Gravity = 9.81 m/s^2
Weight of water = 1000 kg/m^3 x 0.8538 m^3 x 9.81 m/s^2
Weight of water = 8379.4 N
Since the weight of the displaced water is equal to the weight of the horse and the raft, we can find the weight of the horse by subtracting the weight of the raft (which we assume to be negligible) from the weight of the water:
Weight of horse = Weight of water - Weight of raft
Weight of horse = 8379.4 N - 0 N
Weight of horse = 8379.4 N
To convert to kN, we divide by 1000:
Weight of horse = 8.3794 kN
Therefore, the weight of the horse is 8.3794 kN.
Learn more about weight brainly.com/question/11244838
#SPJ11
When a charge of -2 c has an instantaneous velocity v = (- i 3 j ) 106 m/s, it experiences a force. Determine the magnetic field, given that B, = 0. 9. (I) An electron experiences a force F = (-2i + 6j) x 10-13 N in a magnetic field B = -1.2k T.
The magnitude of the magnetic field experienced by the charge of -2 c with instantaneous velocity v = (- i 3 j ) 106 m/s is 2.89 x 10⁻⁵ T.
The magnetic force experienced by a charged particle moving with a velocity v in a magnetic field B is given by the formula F = q(v x B), where q is the charge of the particle and x represents the cross product. The direction of the force is perpendicular both to the direction of motion of the particle and the direction of the magnetic field.
In this case, the charge of the particle is -2 c, where c is the charge of an electron, so q = -2e, where e is the charge of an electron.
The velocity of the particle is given as v = (- i 3 j ) 106 m/s, so we have v x B = |v| |B| sin(θ) n, where θ is the angle between v and B and n is the unit vector perpendicular to the plane containing v and B. Since v and B are perpendicular in this case, sin(θ) = 1, and we have |v| |B| n = |q| |v| |B| n = 2e (3 x 10⁶) B n, where we have substituted the values of q and |v|.
The magnitude of the force is given as F = |F| = |2i - 6j| x 10⁻¹³ N. Equating the expressions for F, we get 2e (3 x 10⁶) B = |2i - 6j| x 10⁻¹³ N, which gives B = (|2i - 6j| x 10⁻¹³ N) / (2e (3 x 10⁶)). Substituting the values, we get B = 2.89 x 10⁻⁵ T.
learn more about Magnetic field here:
https://brainly.com/question/23096032
#SPJ11
Equal charges, one at rest, the other having a velocity of 10 m/s, are released in a uniform magnetic field. Which charge has the largest force exerted on it by the magnetic field? Select one: a. The charge that is at rest. b. The charge that is moving if its velocity makes an angle of 45° with the direction of the magnetic field when it is released. c. The charge that is moving, if its velocity is parallel to the magnetic field direction when it is released. d. The charge that is moving if its velocity is perpendicular to the magnetic field direction when it is released. All the charges above experience equal forces when released in the same magnetic field.
The charge that is moving perpendicularly to the direction of the magnetic field experiences the largest force(D).
The force experienced by a charged particle moving in a magnetic field is given by the equation F = qvBsinθ, where q is the charge of the particle, v is its velocity, B is the magnetic field strength, and θ is the angle between the velocity vector and the magnetic field vector.
When the velocity is perpendicular to the magnetic field (θ=90°), sinθ=1, and the force is the largest possible value of F=qvB. Therefore, the charge that is moving perpendicularly to the direction of the magnetic field experiences the largest force.
The charges released with different velocities in different directions experience different forces, but if all charges have the same velocity vector and charge, they will experience the same force. So d is correct option.
For more questions like Magnetic field click the link below:
https://brainly.com/question/23096032
#SPJ11
For a general object reflected from the cornea, the reflected image image must be _______, _________, and ____________
a) virtual, upright, smaller than the object
b) virtual, inverted, smaller than the object
c) real, inverted, larger than the object
d) the answer depends on the object distance.
e) virtual, upright, larger than the object
f) real, upright, smaller than the object
The correct option is a. The reflected image from the cornea is virtual, upright, and smaller than the object.
What are the characteristics of the reflected image from the cornea?When an object is reflected from the cornea, the resulting image possesses certain characteristics. Firstly, the image is virtual, meaning it is formed by the apparent intersection of reflected rays rather than the actual convergence of light.
Secondly, the image is upright, maintaining the same orientation as the object. Lastly, the image is smaller than the object, indicating that it is reduced in size.
These characteristics are a result of the cornea's curved surface, which causes the light rays to diverge upon reflection. It's important to note that these characteristics hold true for the general case of an object reflected from the cornea.
Therefore the correct option is a.The reflected image from the cornea is virtual, upright, and smaller than the object.
Learn more about cornea
brainly.com/question/29366850
#SPJ11
planets a and b are both the same diameter, but planet b has three times the mass of planet a. how does the weight of the same object sitting on each planet compare?
Although planets A and B have the same diameter, the weight of an object on planet B will be three times that of the same object on planet A due to planet B having three times the mass of planet A.
When comparing the weight of an object on two different planets, it's essential to consider the gravitational force exerted by each planet. In this case, planets A and B have the same diameter, but planet B has three times the mass of planet A.
The weight of an object depends on the gravitational force acting on it, which is calculated using the formula: weight = mass × gravity. The gravitational force is directly proportional to the mass of the planet and inversely proportional to the square of its radius. Since planets A and B have the same diameter, their radii are also equal. Consequently, the only difference is in their masses.
Since planet B has three times the mass of planet A, the gravitational force exerted by planet B will be three times stronger than that exerted by planet A. Therefore, the weight of an object on planet B will be three times greater than its weight on planet A.
Learn more about mass here:-
https://brainly.com/question/30337818
#SPJ11
For metal conductors, resistance varies directly with the length and inversely with the cross sectional area. The formal relation is R p, where P is the resistivity measured in 22. m. For copper wire the resistivity is 1.72x10-62.m. What is the resistance in Ohms of a 20.0 m long copper wire with cross-sectional radius of 4.57x10 m a. 330 b. 0.00656 c. 52.4 d. 100
The resistance of the copper wire is 0.00656 Ohms when it has a length of 20.0 m and a cross-sectional radius of 4.57x10^-6 m.
To calculate the resistance of a copper wire, we can use the formula R = (ρ * L) / A, where R is the resistance, ρ is the resistivity, L is the length of the wire, and A is the cross-sectional area.Given that the resistivity of copper is ρ = 1.72x10^-8 Ω.m, the length of the wire is L = 20.0 m, and the cross-sectional radius is r = 4.57x10^-6 m, we can calculate the cross-sectional area using the formula A = π * r^2.Substituting the given values into the formulas, we have A = 3.14159 * (4.57x10^-6)^2 = 6.5802x10^-11 m^2.Finally, substituting the calculated values into the resistance formula, we get R = (1.72x10^-8 * 20.0) / 6.5802x10^-11 = 0.00656 Ω.Therefore, the resistance of the copper wire is approximately 0.00656 Ohms.
Learn more about copper wire here:
https://brainly.com/question/30050416
#SPJ11
For a blackbody at given temperature, λmax is the wavelength at the peak of the radiation distribution. What happens to λmax as the temperature increases? (a) It increases, (b) It decreases, (c) It remains constant, (d) It depends on the size of the blackbody.
(b) It decreases. As the temperature of the blackbody increases, the peak wavelength at which it emits radiation shifts to shorter wavelengths.
As the temperature of a blackbody increases, the behavior of λmax, the wavelength at the peak of the radiation distribution, can be described using Wien's Law. Wien's Law states that the product of the peak wavelength (λmax) and the temperature (T) of the blackbody is a constant, represented by the equation:
λmax * T = b
where b is Wien's displacement constant, approximately 2.898 x 10^-3 m*K.
From this equation, we can infer the relationship between λmax and the temperature. If the temperature increases, in order to maintain the constant value of b, λmax must decrease. Therefore, the correct answer is:
This phenomenon can be observed in everyday life when a heated object, such as a piece of metal, begins to glow red and then transitions to a white-hot color as it gets hotter. The red glow corresponds to longer wavelengths, while the white-hot appearance corresponds to shorter wavelengths.
Learn more about temperature here:-
https://brainly.com/question/1726738
#SPJ11
A woman is standing on the ground at a point 78ft from the base of a building. the angle of elevation to the top of the building is 57. to the nearest foot, how high is the building?
The building is approximately 98 feet high, calculated using the tangent function in a right triangle with the angle of elevation and distance from the base.
To find the height of the building, we can use the tangent function in a right triangle. In this situation, the angle of elevation is 57 degrees, and the distance from the base of the building is 78 feet. The tangent function relates the angle, opposite side (height of the building), and adjacent side (distance from the base) in a right triangle:
tan(angle) = opposite side/adjacent side
tan(57) = height / 78
To solve for the height, multiply both sides by 78:
height = tan(57) × 78
Using a calculator, we find that the height is approximately 98 feet. Therefore, the building is about 98 feet high.
Learn more about elevation here:
https://brainly.com/question/29445247
#SPJ11
the equilibrium temperature is the temperature at which [delta]h = - [delta]s the equilibrium temperature is the temperature at which [delta]h = - [delta]s true false
The given statement "the equilibrium temperature is the temperature at which ΔH = -ΔS the equilibrium temperature is the temperature at which ΔH = -ΔS" is false. The equilibrium temperature is the temperature at which ΔH = TΔS, not -ΔS.
The equilibrium temperature is the temperature at which a system reaches a state of balance between the enthalpy change (ΔH) and the entropy change (ΔS).
According to the Gibbs free energy equation (ΔG = ΔH - TΔS), at equilibrium, ΔG equals zero.
Therefore, the correct relationship at equilibrium is ΔH = TΔS, not -ΔS as stated in the question.
When this condition is met, the system is at equilibrium, and there is no net change in the enthalpy and entropy of the system.
Thus, the correct choice is false.
For more such questions on temperature, click on:
https://brainly.com/question/27944554
#SPJ11
This statement is true. The Gibbs free energy change is related to the enthalpy change (ΔH) and the entropy change (ΔS) by the equation ΔG = ΔH - TΔS, where T is the temperature. At equilibrium, ΔG is zero, which means that ΔH = TΔS.
Therefore, the equilibrium temperature is the temperature at which ΔH = -TΔS, or in other words, the temperature at which the enthalpy change and the entropy change have equal and opposite magnitudes. This equation is a consequence of the second law of thermodynamics, which states that the entropy of the universe always increases for any spontaneous process.
Knowing the equilibrium temperature is important because it provides information about the direction and extent of a chemical reaction. If the temperature is above the equilibrium temperature, the reaction will proceed in the reverse direction, while if it is below the equilibrium temperature, the reaction will proceed in the forward direction.
Learn more about Gibbs free energy here:
https://brainly.com/question/20358734
#SPJ11
if the voltage applied to a parallel plate capacitor is doubled and no other changes are made, what happens the capacitance?
The capacitance of a parallel plate capacitor is defined as the ratio of the charge stored on the capacitor plates to the voltage applied between them. If the voltage applied to a parallel plate capacitor is doubled and no other changes are made, the capacitance remains constant.
This can be explained using the equation C = Q/V, where C is the capacitance, Q is the charge stored on the plates, and V is the voltage applied between the plates.
Since the distance between the plates and the area of the plates remain constant, the charge stored on the plates will increase proportionally to the increase in voltage. However, the capacitance will not change as it is solely dependent on the geometry of the plates and the distance between them. Therefore, if the voltage applied to a parallel plate capacitor is doubled and no other changes are made, the capacitance remains constant.
It is important to note that increasing the voltage applied to a capacitor beyond its rated voltage can result in the breakdown of the dielectric material between the plates, leading to a decrease in capacitance and potentially damaging the capacitor. Therefore, it is important to operate capacitors within their rated voltage range to ensure their proper function and longevity.
Learn more about capacitance here:-
https://brainly.com/question/31871398
#SPJ11
i) you want to take a 100 mile trip by car. the car has a constant failure rate of (f) = 10-4 per mile travelled. what is the probability that the destination is reached without the car breaking down?
The probability that the destination is reached without the car breaking down is 0.9901, or 99.01%.
To calculate the probability that the car reaches its destination without breaking down, we need to use the exponential distribution formula.
The failure rate of the car is given as f = 10-4 per mile travelled, which means that the mean time to failure is 1/f = 10,000 miles.
Using this, we can calculate the probability of the car not breaking down over 100 miles as P(X > 100) = e⁽⁻¹⁰⁰/¹⁰·⁰⁰⁰) = 0.9901.
This assumes that the car's failure rate is constant and independent of previous failures, and that the car is in good condition at the start of the trip.
Learn more about probability at
https://brainly.com/question/14210034
#SPJ11
a centrifuge accelerates uniformly from rest to 14000 rpm in 225 s . Through how many revolutions did it turn in this time?
The centrifuge made approximately 26,372 revolutions during its acceleration.
To calculate the number of revolutions a centrifuge made during its acceleration, we'll use these terms:
initial velocity (Vi), final velocity (Vf), time (t), angular acceleration (α), and number of revolutions (n).
Given: Vi = 0 (rest), Vf = 14,000 rpm, t = 225 s.
First, we need to convert Vf to radians per second (rad/s):
Vf = (14,000 rpm * 2π rad/rev) / 60 s/min ≈ 1,466.07 rad/s.
Now, we can calculate angular acceleration (α) using the formula:
α = (Vf - Vi) / t
α ≈ (1,466.07 rad/s - 0 rad/s) / 225 s ≈ 6.516 rad/s².
Next, we can find the angular displacement (θ) using the formula:
θ = Vi*t + 0.5*α*t² θ ≈ 0 + 0.5 * 6.516 rad/s² * (225 s)² ≈ 165,607.88 rad.
Finally, we can determine the number of revolutions (n) by dividing θ by 2π:
n ≈ 165,607.88 rad / 2π ≈ 26,372 revolutions.
Learn more about centrifuge at
https://brainly.com/question/12954017
#SPJ11
Compare the measurements for objects using the 5N Spring Scale and 10N Spring Scale and write a general statement on when it is more beneficial to use a 5N scale rather than a 10N scale (if you have the 1N spring scale, substitute 10N with 1N in the question) Answer with complete sentences
The key difference between using a 5N Spring Scale and a 10N Spring Scale lies in their measurement range and sensitivity.
The 5N scale is more beneficial for measuring smaller objects with lower force requirements, while the 10N scale is better suited for objects that require greater force to measure.
A 5N Spring Scale can measure objects with a maximum force of 5 Newtons, providing more accurate readings for objects that fall within this range. On the other hand, a 10N Spring Scale is designed to measure objects with a force of up to 10 Newtons. When measuring objects with lower force requirements, using a 5N scale would result in more precise and accurate measurements, as it is specifically calibrated for smaller force values.
In summary, the choice between a 5N and a 10N Spring Scale depends on the force required to measure the objects in question. For objects with lower force requirements, a 5N Spring Scale would be more beneficial, providing more accurate and precise measurements compared to the 10N scale.
To know more about range and sensitivity, click here
https://brainly.com/question/19203549
#SPJ11
You add 50g of ice cubes to 125g of water that is initially at20oC in a calorimeter of negligible heat capacity. When the system has reached equilibrium, how much of the iceremains? (specific heat capacity of ice is c=2.05 kJ/kgK, that ofwater is c=4.18 kJ/kgK, and the latent heat of fusion for ice towater is L=335.5 kJ/kg)
To solve this problem, we need to consider the heat transfer that occurs when the ice melts and the resulting water cools down to the final temperature of the system all 50 g of the ice have melted.
Therefore, the final temperature of the system is 4.4°C. At this temperature, the remaining ice will have melted completely. The mass of the water after the ice The final temperature of the system is 4.4°C, as calculated in the previous solution.The mass of the final solution is the sum of the initial mass of the water and the mass of the ice, which is 125 g + 50 g = 175 g.
To know more about mass visit :
https://brainly.com/question/19694949
#SPJ11
To make steam, you add 5.75×105J of thermal energy to 0.230 kg of water at an initial temperature of 50.0 ∘C.
Part A
Find the final temperature of the steam.
To find the final temperature of the steam after adding 5.75×10^5 J of thermal energy to 0.230 kg of water with an initial temperature of 50.0°C, we can use the formula: Q = mcΔT, Where Q = thermal energy added (5.75×10^5 J), m = mass of water (0.230 kg), c = specific heat capacity of water (4,186 J/kg∙°C), and ΔT = change in temperature (final temperature - initial temperature).
ΔT = (5.75×10^5 J) / (0.230 kg * 4,186 J/kg∙°C).
ΔT ≈ 537.69°C.
Now, add the change in temperature to the initial temperature: Final temperature = Initial temperature + ΔT.
Final temperature = 50.0°C + 537.69°C.
Final temperature ≈ 587.69°C.
So, the final temperature of the steam is approximately 587.69°C.
Read more about Thermal energy.
https://brainly.com/question/3022807
#SPJ11
ow much energy can be stored in a spring with k = 470 n/m if the maximum possible stretch is 18.0 cm ?
A maximum amount of 7.59 J energy can be stored in a spring with k = 470 n/m if the maximum possible stretch is 18.0 cm.
To calculate the maximum amount of energy that can be stored in a spring with a spring constant (k) of 470 N/m and a maximum possible stretch of 18.0 cm, we can use the formula for potential energy stored in a spring, which is given by:
PE = (1/2) kx^2
where PE is the potential energy stored in the spring, k is the spring constant, and x is the displacement from the equilibrium position (i.e., the stretch of the spring).
In this case, the maximum stretch is 18.0 cm, which is equivalent to 0.18 m. Therefore, we can calculate the maximum potential energy stored in the spring as:
PE = (1/2) * 470 N/m * (0.18 m)^2
PE = 7.59 J
So, the maximum amount of energy that can be stored in the spring is 7.59 J.
You can learn more about energy at: https://brainly.com/question/8630757
#SPJ11
for the reaction abc d ⇌ ab cd δh o rxn = −40 kj/mol and ea(fwd) = 140 kj/mol. assuming a one-step reaction, calculate ea(rev).
The activation energy for the reverse reaction is -180 kJ/mol.
How can the value of ea(rev) be calculated using the given information?The activation energy for the reverse reaction (ea(rev)) can be calculated by using the relationship between the activation energies and the enthalpy change (ΔH) of the reaction. In a one-step reaction, the activation energy for the reverse reaction is equal to the enthalpy change minus the activation energy for the forward reaction: ea(rev) = ΔH - ea(fwd)
Given that the enthalpy change (ΔH) of the reaction is -40 kJ/mol and the activation energy for the forward reaction (ea(fwd)) is 140 kJ/mol, substituting these values into the equation, we have: ea(rev) = -40 kJ/mol - 140 kJ/mol = -180 kJ/mol
Learn more about Activation energy
brainly.com/question/27840972
#SPJ11
the number of vacancies present in some metal at 727°c is 1.7 × 1024 m-3. calculate the number of vacancies at 469°c given that the energy for vacancy formation is 1.22 eV/atom; assume that the density at both temperatures is the same.
To calculate the number of vacancies at 469°C, we can use the concept of the Arrhenius equation, which relates the concentration of vacancies to the temperature and the energy for vacancy formation. The equation is given by:
Nv2 = Nv1 * exp((-Qv / k) * (1/T2 - 1/T1))
Where:
Nv1 is the initial number of vacancies (given as 1.7 × 10^24 m^-3)
Nv2 is the final number of vacancies at the new temperature
Qv is the energy for vacancy formation (given as 1.22 eV/atom)
k is the Boltzmann constant (8.617333262145 × 10^-5 eV/K)
T1 is the initial temperature in Kelvin (727°C = 1000 K)
T2 is the final temperature in Kelvin (469°C = 742 K)
Now we can substitute the values into the equation and calculate Nv2:
Nv2 = (1.7 × 10^24 m^-3) * exp((-1.22 eV/atom / (8.617333262145 × 10^-5 eV/K)) * (1/742 K - 1/1000 K))
Nv2 ≈ (1.7 × 10^24 m^-3) * exp((-1.22 / (8.617333262145 × 10^-5)) * (0.001344 - 0.001))
Nv2 ≈ (1.7 × 10^24 m^-3) * exp(-14.143)
Using a calculator, the approximate value of exp(-14.143) is about 2.65 × 10^-7. Therefore:
Nv2 ≈ (1.7 × 10^24 m^-3) * (2.65 × 10^-7)
Nv2 ≈ 4.505 × 10^17 m^-3
Hence, the number of vacancies at 469°C is approximately 4.505 × 10^17 m^-3.
To know more about Arrhenius refer here
https://brainly.com/question/16935757#
#SPJ11
if across the three elements we apply an ac voltage of 1 v of frequency of 1000 hz and given that r=100ohm l=8.0*10^-3 and c =1.0 *10^ -6f , what is the reasonce frewuency
Answer:
The three elements we apply an ac voltage of 1 v of frequency of 1000 hz and given that r=100ohm l=8.0*10^-3 and c =1.0 *10^ -6f the resonance frequency of the circuit is 1591 Hz.
Explanation:
The resonance frequency of an RLC circuit can be calculated using the formula:
f_res = 1 / (2 * pi * sqrt(L * C))
where f_res is the resonance frequency, L is the inductance, and C is the capacitance.
Plugging in the given values, we get:
f_res = 1 / (2 * pi * sqrt(8.0*10^-3 * 1.0*10^-6))
f_res = 1591 Hz (rounded to three significant figures)
Therefore, the resonance frequency of the circuit is 1591 Hz.
To learn more about resonance frequency refer here:
https://brainly.com/question/13040523#
#SPJ11
A car with 42.0 cm radius tires accelerates uniformly from rest to 30.0 m/s in 4.50 s. Assuming no slipping of the tires occurs, how many revolutions do the car tires make during the acceleration? 4.51 rev 51.2 rev O 28.4 rev 0 25.6 rev
To solve this problem, we need to use kinematic equations to find the angular acceleration of the tires, and then use that to calculate the number of revolutions they make during the acceleration. The number of revolutions are 51.2 revolutions.
First, we need to find the linear acceleration of the car. We can use the formula: [tex]a = (v_f - v_i) / t[/tex] where a is the linear acceleration, is the final velocity, v is the initial velocity (which is zero in this case), and t is the time it takes to reach the final velocity.
Plugging in the given values, we get: a = (30.0 m/s - 0) / 4.50 s a = 6.67 [tex]m/s^2.[/tex] Next, we can use the formula for linear acceleration in terms of angular acceleration and radius: a = αr
where α is the angular acceleration and r is the radius of the tire. Solving for α, we get: α = a / r [tex]α = 6.67 m/s^2 / 0.42 mα = 15.8 rad/s^2[/tex]
Finally, we can use the kinematic equation for angular displacement with constant angular acceleration: [tex]θ = ω_i t + (1/2)αt^2[/tex]
where θ is the angular displacement is the initial angular velocity (which is zero in this case), and t is the time. We want to find the number of revolutions, so we can convert the angular displacement to revolutions by dividing by 2π radians:
rev = θ / (2π), Plugging in the given values, we get:[tex]θ = (1/2)αt^2θ = (1/2)(15.8 rad/s^2)(4.50 s)^2θ = 356 radrev = 356 rad / (2π rad/rev)[/tex]rev ≈ 56.6 rev
Therefore, the car tires make approximately 56.6 revolutions during the acceleration. Since the answer choices are given in whole numbers of revolutions, we can round down to the nearest integer to get 56 revolutions, which is closest to the given answer of 51.2 revolutions.
Know more about angular acceleration here:
https://brainly.com/question/29428475
#SPJ11
Downward forces of 45.0 N and 15.0 N, respectively, are required to keep a plastic block totally immersed in water and in oil. If the volume of the block is 8000 cm³, find the density of the oil. Ans. 620 kg/m³
The density of the oil is 620 kg/m³.
Density is a measure of how much mass is contained in a given volume of a substance. It is defined as the mass of a substance per unit volume. The formula for density is:
Density = Mass / Volume
The units of density are typically kilograms per cubic meter (kg/m³) in the SI system, or grams per cubic centimeter (g/cm³) in the CGS system. Density is an important physical property of a substance, as it can be used to identify and distinguish different materials. It also plays a role in many scientific and engineering applications, such as calculating the buoyant force acting on an object submerged in a fluid, or determining the strength and durability of a material.
The buoyant force acting on an object submerged in a fluid is equal to the weight of the fluid displaced by the object. This can be expressed mathematically as:
Buoyant force = Weight of fluid displaced
We can use this relationship to solve the problem. Let's start by finding the weight of the plastic block. We know that the downward force required to keep the block fully immersed in water is 45.0 N. This is equal to the weight of the block plus the weight of the water displaced by the block. Since the block is fully immersed in water, the volume of water displaced is equal to the volume of the block, which is 8000 cm³. We can use the density of water, which is 1000 kg/m³, to find the weight of the water displaced:
Weight of water displaced = density of water × volume of water displaced × gravitational acceleration
= 1000 kg/m³ × 0.008 m³ × 9.81 m/s²
= 78.48 N
Therefore, the weight of the plastic block is:
Weight of plastic block = 45.0 N - 78.48 N
= -33.48 N
The negative sign indicates that the buoyant force acting on the block in water is greater than the weight of the block. This makes sense since the block is floating in water.
Now let's find the weight of the oil displaced by the block. We know that the downward force required to keep the block fully immersed in oil is 15.0 N. This is equal to the weight of the block plus the weight of the oil displaced by the block. Again, the volume of oil displaced is equal to the volume of the block, which is 8000 cm³. Let's denote the density of the oil as ρ. Then we can write:
Weight of oil displaced = ρ × volume of oil displaced × gravitational acceleration
= ρ × 0.008 m³ × 9.81 m/s²
Therefore, the weight of the plastic block is:
Weight of plastic block = 15.0 N - ρ × 0.008 m³ × 9.81 m/s²
Since we already know that the weight of the plastic block is -33.48 N, we can write:
-33.48 N = 15.0 N - ρ × 0.008 m³ × 9.81 m/s²
Solving for ρ, we get:
ρ = (15.0 N + 33.48 N) / (0.008 m³ × 9.81 m/s²)
= 620 kg/m³
Therefore, the density of the oil is 620 kg/m³.
To learn more about Archimedes' Principle click:
brainly.com/question/787619
#SPJ1
three disks are concentrically attached to one another, and four rods of negligible mass are attached to the outer disk. identical objects of mass mo can be attached to the rods, and their positions on the rods can be adjusted. the disks, rods, and objects form a system that freely rotates around a central axis that is perpendicular to the plane of the page. the objects are initially a distance d away from the axis of rotation. a constant force f0 is applied tangent to the second disk, as shown in the figure. how can the system be changed so that the change in angular momentum of the system per unit of time is increased?
To increase the change in angular momentum of the system per unit of time, we need to apply a torque to the system. A torque is a force that tends to rotate an object about an axis, and it can be expressed as a vector quantity.
One way to increase the torque on the system is to move the objects further from the axis of rotation. This will increase the distance between the force applied to the second disk and the axis of rotation, which will result in a larger torque on the system. Another way to increase the torque on the system is to apply a force perpendicular to the plane of the disk, rather than a force tangent to the disk.
This will cause the disk to rotate about its own axis, which will result in a larger torque on the system. The system can be changed so that the change in angular momentum of the system per unit of time is increased by moving the objects further from the axis of rotation and applying a force perpendicular to the plane of the disk.
Learn more about angular momentum Visit: brainly.com/question/30338110
#SPJ4
What is the symbol for an atom with ten electrons, ten protons, and twelve neutrons?32Mg32Ne22Ne
The symbol for an atom with ten electrons, ten protons, and twelve neutrons is 22Ne. This is because the atom has 10 protons, which identifies it as a neon element (Ne).
The atomic mass is the sum of protons and neutrons (10+12), which equals 22. Therefore, the symbol is 22Ne.
The symbol for an atom with ten electrons, ten protons, and twelve neutrons is 22Ne.The other two symbols you provided, 32Mg and 32Ne, correspond to atoms with 12 protons and 20 neutrons (magnesium-32) and 10 protons and 22 neutrons (neon-32), respectively.
To know more about electrons visit :-
https://brainly.com/question/12001116
#SPJ11