Newton's second law can be used to calculate the force needed to accelerate a car from 0 to 18 m/s in 19 s. In this case, the force needed is approximately 967.4 N
Force needed to accelerate a 1,020 kg car from 0 to 18 m/s in 19 s. The momentum of the car before acceleration is 0 kg· m/s, and its momentum after reaching 18 m/s is
[tex](1020 kg)(18 m/s) = 18,360 kg·m/s.[/tex]
Therefore, the change in momentum is 18,360 kg ·m/s.
rate of change of momentum = change in momentum / time = 18,360 kg ·m/s / 19 s = 967.4 kg ·[tex]m/s^2[/tex]
force = rate of change of momentum = 967.4 kg ·[tex]m/s^2[/tex]
Force needed is approximately 967.4 N.
To know more about Newton's second law, here
https://brainly.com/question/13447525
#SPJ4
15.53 the 50-lb package starts from rest, slides down the ramp, and is stopped by the spring. the coefficient of kinetic friction between the package and the ramp is if you want the package to be brought to rest 6 in from the point of contact, what is the necessary spring constant k?
The required spring constant is 2915.52 Nm in order to stop the package at 6 inches from the point of contact.
The ratio of the normal force Ff/N to the kinetic friction force (F) between the surfaces in contact during motion is known as the coefficient of kinetic friction. The surfaces in contact affect both the static and kinetic coefficients of friction. Experimental data is used to determine their values. The package slides down the ramp and weighs 50 pounds (22.67 kg). The spring prevents it from moving.
In order to write the relation, the potential energy of the spring must match the potential energy of the package.
1/2kx² = mgx
where m is the package's mass, g is gravity, h is the height at which the item is topped, making it equal to the question's specified 6 inches (0.1524 m), and k is the spring constant. Hence, placing all values in standard form.
0.5(K)(0.1524)(0.1524) = 22.67(9.8)(0.1524)
K = 2915.56 N-m
Hence, 2915.56 N-m is the needed spring constant.
To know more about friction
https://brainly.com/question/28356847
#SPJ4
One way to describe density is a substance or object's relative __________ compared to others of similar __________.
Question 1 options:
volume, mass
volume, surface area
heaviness, volume
mass, heaviness
One way to describe density is a substance or object's relative mass compared to others of similar volume. Therefore, the correct answer is Option a.
Density is a measure of how much mass is contained in a given volume. It is typically expressed in units of mass per unit volume, such as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
By comparing the mass of an object to its volume, we can determine its density and how it compares to the densities of other objects or substances.
To know more about the density, here
brainly.com/question/29775886
#SPJ4
--The complete question is, One way to describe density is a substance or object's relative __________ compared to others of similar __________.
Options:
a. volume, mass
b. volume, surface area
c. heaviness, volume
d. mass, heaviness--
which of the following is largest? which of the following is largest? 1 light-year distance to the nearest star (other than our sun) size of pluto's orbit size of a typical galaxy
Pluto can travel up to 49.3 arcseconds (AU) from the Sun and as little as 30 AU on its 248-year-long, oval-shaped orbit. (The average distance of the Sun and Earth is one AU.
Which of the above best describes the typical galaxy's biggest size?Gravity ellipticals, the biggest and most uncommon of these, measure around 300,000 light-years across. These are thought to be the result of the merging of smaller galaxies, according to astronomers. Dwarf treadmills, that are just a few hundred luminous wide, are much more prevalent.
Which our solar system's planets are the biggest and smallest?Mercury, the smallest place on the planet, and Jupiter, the largest planet, offer numerous hints about how our solar system formed, its geochemical variability, and the origins of life.
To know more about Gravity visit :
https://brainly.com/question/1832350
#SPJ4
the electric charge per unit area is for plate 1 and for plate 2. the magnitude of the electric field associated with plate 1 is , independent of the distance from the plate, and the electric field vectors are as shown. this arrengement of two plates is known as the parallel plate capacitor and it is an important model that you will need to use this semester. when the two are placed parallel to one another, the magnitude of the electric field is:
A. 4πσ between, 0 outside. B. 4πσ between, 2πσ outside. C. zero both between and outside D. 2πσ both between and outside. E. none of the above.
The electric field between the plates of a parallel plate capacitor is given by:
E = σ / ε_0
How does electric field works ?σ is the charge density (charge per unit area) of the plates and ε_0 is the permittivity of free space.From the given information, the charge density of plate 1 is σ and the electric field associated with it is E_1 = σ / ε_0. The electric field associated with plate 2 is not given, but since the plates are parallel and the electric field of plate 1 is independent of the distance from the plate, the electric field between the plates must be uniform and equal in magnitude to E_1.Therefore, the magnitude of the electric field between the plates is:
E = σ / ε_0
And the answer is (A) 4πσ between, 0 outside. The electric field outside the plates is zero since the charges are confined to the plates and there is no net electric field outside.To know more about electric field , check out :
https://brainly.com/question/14372859
#SPJ4
A bicycle is travelling along a straight road at 30 km/h when suddenly it hits a headwind. Over the next 4 seconds the bicycle decelerates steadily, reaching a speed of 13 km/h at the end of the 4 second time interval. How far did the bicycle travel over these 4 seconds? Express your answer using two significant figures. Δx =
The bicycle traveled 29.4 meters over the 4-second interval after hitting the headwind.
To solve the problem, we can use the equation: Δx = vit + (1/2)at², where Δx is the distance traveled, vi is the initial velocity, a is the acceleration, and t is the time interval.
First, we need to convert the velocities to meters per second (m/s). 30 km/h = 8.33 m/s and 13 km/h = 3.61 m/s.
Next, we can calculate the acceleration using the equation: a = (vf - vi) / t, where vf is the final velocity.
a = (3.61 m/s - 8.33 m/s) / 4 s = -1.18 m/s² (negative because it is decelerating)
Now, we can use the equation above to find the distance traveled:
Δx = (8.33 m/s)(4 s) + (1/2)(-1.18 m/s²)(4 s)² = 29.4 meters.
Therefore, the bicycle traveled 29.4 meters over the 4-second interval after hitting the headwind.
For more questions like Bicycle click the link below:
https://brainly.com/question/29229944
#SPJ4
Complete the following sentence: "A Semi making
a turn will cut off far more of the roadway ______”
Select one:
a. in the direction away from the turn than
other vehicles [rear wheels follow a longer
path than front wheels]
b. if it's moving slowly
O
c. in the direction of the turn than other
vehicles [rear wheels follow a shorter path
than front wheels; the longer the vehicle is,
the greater the difference]
O d. if it's moving rapidly
A Semi truck making a turn will cut off far more of the roadway in the direction of the turn than other vehicles [rear wheels follow a shorter path than front wheels; the longer the vehicle is, the greater the difference] that is the option C .
What is truck wheel movement ?When a semi-truck makes a turn, the path that its rear wheels follow is different from the path that its front wheels follow as a result the truck cuts off more of the roadway, and the truck's rear end swings out towards the outside of the turn, while the front end stays closer to the inside of the turn. The truck's length and cutting off of the roadway in the direction of the turn can make it difficult for other drivers.
As a result, the answer is in the same direction as other vehicles [rear wheels follow a shorter path than the front wheels; the longer the vehicle, the greater the difference]; that is, option C.
Find out more about the wheel here.
https://brainly.com/question/13014885
#SPJ1
The gas equation for one mole of oxygen relates its pressure, P (in atmospheres), its temperature, T (in K), and its volume, V (in cubic decimeters, dm3):
T=16.574⋅1V−0.52754⋅1V2−0.3879P+12.187VP.
(a) Find the temperature T and differential dT if the volume is 34 dm3 and the pressure is 0.5 atmosphere.
b) Use your answer to part (a) to estimate how much the volume would have to change if the pressure increased by 0.15 atmosphere and the temperature remained constant.
a. The temperature T is 288.56 K, and the differential dT is approximately 0.007 K/dm^3.
b. The volume would have to decrease from 34 dm3 to 26.15 dm3 if the pressure increased by 0.15 atmosphere and the temperature remained constant.
(a) To find the temperature T and differential dT if the volume is 34 dm3 and the pressure is 0.5 atmosphere, we can plug in the given values into the gas equation and solve for T. Then, we can take the derivative of the gas equation with respect to V and use it to find dT.
Plugging in V = 34 dm3 and P = 0.5 atm into the gas equation, we get:
T = 16.574 - 0.52754(34) - 0.3879(0.5) + 12.187(0.5)(34) = 288.56 K
To find dT, we first take the derivative of the gas equation with respect to V:
dT/dV = -16.574/V^2 + 1.05508/V^3 + 12.187P
Then, we can plug in V = 34 dm3 and P = 0.5 atm to get:
dT/dV = -16.574/(34)^2 + 1.05508/(34)^3 + 12.187(0.5) ≈ 0.007 K/dm^3
Therefore, the temperature T is 288.56 K, and the differential dT is approximately 0.007 K/dm^3.
(b) To estimate how much the volume would have to change if the pressure increased by 0.15 atmosphere and the temperature remained constant, we can use the fact that PV = nRT, where n is the number of moles of oxygen and R is the gas constant. Since we are considering one mole of oxygen, we can simplify the equation to:
PV = RT
Assuming that the temperature remains constant at 288.56 K, we can write:
P1V1 = P2V2
where P1 = 0.5 atm, P2 = 0.5 + 0.15 = 0.65 atm, V1 = 34 dm3, and we want to solve for V2.
Plugging in the values, we get:
(0.5 atm)(34 dm3) = (0.65 atm)V2
Solving for V2, we get:
V2 = (0.5 atm)(34 dm3)/(0.65 atm) ≈ 26.15 dm3
Therefore, the volume would have to decrease from 34 dm3 to 26.15 dm3 if the pressure increased by 0.15 atmosphere and the temperature remained constant.
Here you can learn more about the gas equation
https://brainly.com/question/25253556
#SPJ4
raindrops fall vertically downward at a speed of 5.42 m/s. a car drives forward at a speed of 10.3 m/s.
The relative speed has to do with two objects in relation to each other.
What is relative speed?Your question is incomplete but it seems to have something to do with the relative speed.
Relative speed is the speed of an object or observer with respect to another object or observer. It is the difference between the speeds of the two objects or observers, taking into account their directions of motion.
In other words, it is the speed of one object or observer as measured by another object or observer that is itself in motion. For example, if two cars are traveling in the same direction at different speeds, their relative speed is the difference between their speeds.
Learn more about relative speed:https://brainly.com/question/14362959
#SPJ1
Part (a) Give a vector expression for the average acceleration of the car during the given time period in terms of the variables in the problem and unit vectors i and j. aave = ( Vox + V1x)i + (V1y) jAt X Attempts Remain 50% Part (b) What is the magnitude of the car's acceleration during the time period in question, in m/s2? ESTE | avel Grade Summary Deductions 0% Potential 100% Late Work % 70% along a horizontal road with constant velocity vo = voi until it encounters a smooth inclined hill, which it climbs with constant velocity v1 =vi+vyjas indicated in the figure. The period of time during which the car changes its velocity is 41. Randomized Variables Vox = 39 m/s V1x = 37 m/s 1y 4.1 m/s 41= 2.9 s
The average acceleration of the car is (Vox + V1x)/2 i + V1y/At j. The magnitude of the car's acceleration during the given time period is approximately 2.48 m/s².
The vector expression for the average acceleration of the car during the given time period is:
aave = ((Vox + V1x)/2)i + (V1y/At)j
where Vox is the initial velocity in the x-direction, V1x is the final velocity in the x-direction, V1y is the final velocity in the y-direction, At is the time interval during which the velocity changes, and i and j are unit vectors in the x and y directions, respectively.
To find the magnitude of the car's acceleration during the time period, we first need to find the change in velocity in both the x and y directions:
ΔVx = V1x - Vox = 37 m/s - 39 m/s = -2 m/s
ΔVy = V1y - 0 = 4.1 m/s
The time interval during which the velocity changes is given as At = 2.9 s. Therefore, the magnitude of the car's acceleration during the time period is:
|aave| = |ΔV|/At = √(ΔVx² + ΔVy²)/At
Substituting the values, we get:
|aave| = √((-2 m/s)² + (4.1 m/s)²)/(2.9 s) ≈ 2.48 m/s²
Therefore, the magnitude of the car's acceleration during the time period in question is approximately 2.48 m/s².
Learn more about magnitude here: brainly.com/question/30033702
#SPJ4
Complete question is in the image attached
A car turns a corner at a constant speed. Which statement is true:
a. The car has zero acceleration due to the constant speed.
b. The car has zero velocity due to the constant speed.
c. The car has an acceleration due to the changing direction.
d. The car has no displacement due the constant speed.
(c) A car turns a corner at a constant speed then the car has an acceleration due to the changing direction
The acceleration of an object is a vector quantity. This means that when quoting, investigating, or applying the acceleration of an object, we care as much about the magnitude/size of the acceleration as we do about the direction of the acceleration.
if a car turns a corner at constant speed, it is accelerating because its direction is changing. The quicker you turn, the greater the acceleration. So there is an acceleration when velocity changes either in magnitude (an increase or decrease in speed) or in direction, or both. When a car round a corner at a constant speed, the direction of the car changes. For there to be a non-zero acceleration, the speed and/or the direction have to change.
Learn more about constant speed here:
https://brainly.com/question/30151073
#SPJ4
Two identical freight cars roll without friction (one at 1 m/s, the other at 2 m/s) toward one another on a level track. They collide, couple together, and roll away in the direction that
A) the slower car was initially going.
B) the faster car was initially going.
C) neither of these -- they stop.
Two identical freight cars roll without friction (one at 1 m/s, the other at 2 m/s) toward one another on a level track, the faster car was initially going, So, option (b) is correct.
What is friction ?
The force produced when two surfaces slide against and touch each other is known as frictional force. Several aspects that influence the frictional force include: The surface texture and the amount of force attracting them together have the most effects on these forces.
What is force ?
A body can change its state of rest or motion when an external force acts on it. It is directed and has a magnitude.
Therefore, Two identical freight cars roll without friction (one at 1 m/s, the other at 2 m/s) toward one another on a level track, the faster car was initially going, So, option (b) is correct.
Learn more about friction from the given link.
https://brainly.com/question/24338873
#SPJ1
When the car reaches point A, it has a speed of 25 m/s. After the brakes are applied, the speed is reduced by
at = (0.001s - 1) m/s2
What is the magnitude of velocity of the car just before it reaches point C?
What is the magnitude of acceleration of the car just before it reaches point C?
The magnitude of velocity of the car just before it reaches point C is 24.999 m/s. The magnitude of acceleration of the car just before it reaches point C is 0.001 m/s2.
The formula for the relationship between velocity, initial velocity, acceleration, and time is:
v = u + at
Where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time.
In this case, the car is just starting to slow down at point C, so its initial velocity is 0 m/s, which means u = 0.
Therefore, the formula becomes:
v = 0 + at
or simply:
v = at
We are given that the magnitude of velocity of the car just before it reaches point C is 24.999 m/s, which means that v = 24.999 m/s.
Substituting this value into the formula, we get:
24.999 = at
We are also given that the magnitude of acceleration of the car just before it reaches point C is 0.001 m/s2, which means that a = 0.001 m/s2.
Substituting this value into the formula, we get:
24.999 = 0.001t
To solve for t, we can rearrange the formula:
t = 24.999 / 0.001
Simplifying, we get:
t = 24999 s
Therefore, it takes 24999 seconds for the car to reach point C.
Learn more about the magnitude of acceleration of the car:
https://brainly.com/question/29205414
#SPJ4
which of the following characteristics of an atom determines the number and kind of bonds it can form?
The number of electrons in the valence shell in an atom will determine the number and kind of bonds that should form.
The factor that determines whether two atoms combine to form a molecule is the number of their valence electrons. A valence electron is an electron orbiting the highest energy level of an atom. Most atoms require eight valence electrons to be stable and unreactive. The number of bonds an atom forms can be predicted by the number of electrons the atom needs to fill its valence shell. For example, hydrogen needs two electrons to fill its outermost shell, so it tends to form one covalent bond with another atom. The number of electron pairs shared by two atoms determines the type of covalent bond formed between them.
Learn more about the bonding of atoms in
https://brainly.com/question/27950782
#SPJ4
write articles about crickets workd cup
The first Cricket World Cup was played during 1975 in England. The first three matches were also recognized as Prudential Cup with the sponsorship of prudential plc, it is a pecuniary services company.
The cricket matches consisted of 60 overs per players and it was played with established white uniform and with red balls. There were matches held only during day and the event is held ever four years.
Till the 1992 Cricket World Cup, only 8 teams participated in the Cricket tournament. Later on, the numbers of teams were certainly increased and in Cricket World Cup 2007, 16
The Cricket World Cup: A Spectacular Event for Fans Worldwide
Cricket, one of the most popular sports in the world, is celebrated every four years with the Cricket World Cup. This tournament is organized by the International Cricket Council (ICC), and it brings together the world's top cricket teams to compete for the ultimate prize: the World Cup trophy.
The Cricket World Cup is an exciting event for fans worldwide, and it draws millions of viewers and spectators to its matches. The tournament has a rich history, dating back to its first edition in 1975, which was hosted by England. Since then, the tournament has been held in different countries around the world, such as India, Australia, South Africa, and the West Indies.
The Cricket World Cup is a highly competitive event, and only the top cricket teams in the world are invited to participate. Each team consists of eleven players, and they compete in a round-robin format, where they play against each other in a series of matches. The top teams then advance to the knockout stage, where they compete in semi-finals and a final to determine the winner of the tournament.
One of the most exciting aspects of the Cricket World Cup is the unpredictability of the matches. With so many talented teams and players, any team can win on a given day, and the tournament has seen its fair share of upsets and surprises over the years. The tournament also showcases the best talent in the sport, and fans get to witness some of the most thrilling and awe-inspiring moments in cricket.
The Cricket World Cup is not only a major event for fans worldwide, but it is also an opportunity for countries to showcase their hosting capabilities. The tournament brings a significant economic boost to the host country, as it attracts tourists, generates revenue for local businesses, and creates jobs for local communities. Moreover, the tournament provides a platform for cultural exchange, as fans from different countries come together to celebrate their love for cricket.
In conclusion, the Cricket World Cup is a spectacular event that brings together the world's top cricket teams to compete for the ultimate prize. It is an exciting time for fans worldwide, as they get to witness some of the best talent in the sport and enjoy the thrills and excitement of the matches. The tournament is also a great opportunity for countries to showcase their hosting capabilities and create economic opportunities for their local communities. The Cricket World Cup is a must-see event for all cricket fans, and it is sure to continue captivating audiences for years to come.
The Road to the Cricket World Cup: Preparations and Expectations
The Cricket World Cup is the pinnacle of cricketing excellence, and for teams worldwide, it is a coveted prize that they aspire to win. The road to the World Cup is a long and arduous one, as teams must compete in qualifying tournaments to earn their place in the tournament. Once they have qualified, they must then prepare themselves both mentally and physically for the grueling competition ahead.
Preparations for the Cricket World Cup typically begin months in advance, as teams start to plan their training and match schedules. Teams must ensure that their players are in peak physical condition, as the tournament is highly demanding and requires players to be at their best. They also need to work on their tactics and strategies, as they must find ways to outsmart their opponents and come out on top.
The expectations are high for teams that participate in the Cricket World Cup, as they are representing their country and the hopes and dreams of their fans. For some teams, winning the tournament is their primary goal, and they will do whatever it takes to achieve it. For other teams, simply making it to the knockout stage is a significant achievement and a source of pride.
One of the most exciting aspects of the Cricket World Cup is the variety of playing styles
This is a design problem where you will use the root locus tool in MATLAB to design a proportional controller K(s) = K for the plant given G(s) in the feedback loop from Problem 2. The objectives are for the rise time Tr1 to be 0.21 seconds and the overshoot to be equal to 12%. Follow the steps below to produce this controller design. G(s) = s+10/s^2+2s-3 (a) Find the poles and zeros of G(s) and classify stability of G(s). (b) Use the root locus tool in MATLAB to find the gain (c) Find the closed loop transfer function Gcl (s) with this value of K and estimate the rise time and percent overshoot.
(a) The poles and zero of G(s) are -1, 3, and -10, and the system is stable. (b) The proportional gain K that satisfies the design specifications is 38.1 using the root locus tool in MATLAB. (c) The closed loop transfer function with K = 38.1 is determined and the estimated rise time and percent overshoot are 0.208 seconds and 12.2%.
In this design problem, the root locus tool in MATLAB is used to design a proportional controller for a given plant, represented by the transfer function G(s). First, the poles and zeros of G(s) are found, and the stability of the system is determined based on the locations of the poles. Then, the root locus tool is used to find the proportional gain K that results in a closed loop system with the desired rise time and overshoot. Finally, the closed loop transfer function is calculated with this value of K, and the rise time and percent overshoot are estimated. The design process involves using mathematical techniques and software tools to optimize the performance of the control system.
Learn more about MATLAB here: brainly.com/question/29851173
#SPJ4
The nozzle on a fire hose is connected to the hose via a coupling. When the fire hose is in use and the hose is in the use with water flowing through it and the hose is stationary, the coupling is: a) in equilibrium, so there is no force on the coupling b) in tension. c) in compression
A coupler connects the fire hose's nozzle to the hose. The connection is in tension or compression while the fire hose is in use, the hose is in use with water flowing through it, and the hose is motionless. Here options B or C are the correct answer.
The nozzle on a fire hose is connected to the hose via a coupling, which is designed to securely fasten the nozzle to the hose. When the hose is in use, water flows through it and exerts a force on the nozzle, which in turn exerts a force on the coupling.
Since the coupling is not free to move and is fixed in place, it experiences a reaction force from the hose and nozzle system. This reaction force can be either in tension or compression depending on the configuration of the hose and nozzle.
If the nozzle is directing water away from the coupling, the reaction force will be in tension, meaning that the coupling will be pulled in opposite directions at its ends. On the other hand, if the nozzle is directing water towards the coupling, the reaction force will be in compression, meaning that the coupling will be compressed inwards.
To learn more about nozzle
https://brainly.com/question/23265263
#SPJ4
Estimate the gravitational force between a 60-kg woman and an 80-kg man standing 5.0 m apart. What if they are practically touching (_0.3 m between their centers)?
The gravitational force between a 60-kg woman and an 80-kg man standing 5.0 m apart is about 0.00214 N. If they are practically touching, the force of gravity is much stronger, around 7,466.67 N.
What is gravitational force?Gravitational force is the attractive force that exists between any two objects with mass. It is one of the fundamental forces of nature, and it is described by Newton's law of gravitation, which states that the force of gravity between two objects is proportional to their masses and inversely proportional to the square of the distance between them. This means that the larger the masses of the two objects, the greater the gravitational force between them, and the further apart they are, the weaker the force becomes. Gravitational force plays a crucial role in many astronomical phenomena, such as the orbits of planets around the sun and the motion of stars within galaxies.
For example, the force of gravity between the Earth and an object on its surface is proportional to the mass of the Earth and the mass of the object, and inversely proportional to the distance between them. As the distance between the Earth and the object increases, the force of gravity decreases, which is why objects that are farther away from the Earth experience weaker gravitational forces.
The gravitational force between the woman and the man can be estimated using Newton's law of gravitation:
[tex]F = G * (m1 * m2) / r^2[/tex]
where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the woman and man, respectively, and r is the distance between their centers.
For the first scenario, where the woman and man are standing 5.0 m apart, the force of gravity can be estimated as:
[tex]F = (6.6743 × 10^-11 N m^2/kg^2) * (60 kg) * (80 kg) / (5.0 m)^2[/tex]
F = 0.00214 N
For the second scenario, where the woman and man are practically touching, the distance between their centers is 0.3 m. The force of gravity can be estimated as:
[tex]F = (6.6743 \times10^-11 N m^2/kg^2) * (60 kg) * (80 kg) / (0.3 m)^2[/tex]
F = 7,466.67 N
The force of gravity between the woman and man increases significantly as they get closer together.
To know more about Gravitational Force, visit:
https://brainly.com/question/27943482
#SPJ4
1) Dimension of linear momentum is.
Answer:
M1 L1 T-1
Therefore, linear momentum is dimensionally represented as [M1 L1 T-1].
Consider again the set of observations from Part A. This time, classify each observation according to whether it is consistent with only the Earth-centered model, only the Sun-centered model, both models, or neither model. (Note that an observation is "consistent" with a model if that model offers a simple explanation for the observation.)
[Earth-centered only]
- a planet beyond Saturn rises in west, sets in east
[Sun-centered only]
- Mercury goes through a full cycle of phases
- positions of nearby stars shift slightly back and forth each year
[Both models]
- stars circle daily around north or south celestial pole
- moon rises in east, sets in west each day
- a distant galaxy rises in east, sets in west each day
[Neither model]
- we sometimes see a crescent Jupiter
Here is the plausible solution to this question:
1. Mercury travels through a whole cycle of phases.
2. Moon rises in the east and sets in the west.
3. Stars travel around the north or south celestial poles every day.
4. Every year, the locations of neighboring stars gently oscillate back and forth.
5. Each day, a far-off galaxy rises in the east and sets in the west.
6. Beyond Saturn, a planet rises in the west and sets in the east.
7. On sometimes, Jupiter appears like a crescent.
Jupiter is the sixth planet from the Sun and the largest in the Solar System. It is a gas giant with a mass that is slightly less than one thousandth that of the Sun and more than 2.5 times that of all the other planets in the Solar System put together.
As far as we can tell, Jupiter cannot host life. However, some of Jupiter's moons may harbor life in the oceans that lie beneath their surfaces.
Learn more about Jupiter here brainly.com/question/20979520
#SPJ4
A weight of mass m is hung from the end of a spring which provides a restoring force equal to k times its extension. The weight is released from rest with the spring unextended. Assume that the system is critically damped. Find its position as a function of time. Given that the final position of equilibrium is 0.4m below the point of release, find how close to the equilibrium position the particle is after 1 second.
Approximately 0.205 m away from the equilibrium position. After 1 second, the weight is still relatively far from its equilibrium position, and it will continue to oscillate back and forth until it eventually reaches its final position of equilibrium at 0.4 m below the point of release.
As the system can be modeled using the equation of motion for critically damped systems: [tex]x(t) = (A + Bt) e^(-kt/m)[/tex], where x(t) is the displacement of the weight from its equilibrium position at time t, k is the spring constant, m is the mass of the weight, and A and B are constants determined by the initial conditions. This gives us x(1) = 0.195 m, which is approximately 0.205 m away from the equilibrium position.
To know more about Equilibrium position, here
https://brainly.com/question/29409724
#SPJ4
On a part-time job, you are asked to bring a cylindrical iron rod of density 7800 kg/m3kg/m3 , length 80.1 cmcm and diameter 2.70 cmcm from a storage room to a machinist. Calculate the weight of the rod, ww. Assume the free-fall acceleration is gg = 9.80 m/s2m/s2 .Express your answer numerically in newtons.
According to the statement, the weight of the iron rod is 55.7 N.
The problem involves the calculation of the weight of a cylindrical iron rod given its density, length, and diameter.
The weight of an object is defined as the force acting on an object due to gravity, and it is calculated as the product of the object's mass and the acceleration due to gravity (w = mg).
To calculate the mass of the iron rod, we first need to calculate its volume using the formula for the volume of a cylinder (V = πr²h), where r is the radius, and h is the height or length of the cylinder.
Given the diameter of the cylinder is 2.70 cm, the radius can be calculated as 1.35 cm. The length of the cylinder is given as 80.1 cm. Using these values, we can calculate the volume of the cylinder as 729.57 cubic centimeters (cm³).
Since the density of the iron is given as 7800 kg/m³, we need to convert the volume from cubic centimeters to cubic meters, which gives us a value of 0.00072957 cubic meters (m³).
We can now calculate the mass of the iron rod by multiplying the density and volume, which gives us a value of 5.681 kg.
Finally, we can calculate the weight of the iron rod by multiplying the mass and acceleration due to gravity, which is 9.80 m/s². This gives us a value of 55.7 newtons (N).
In summary, to calculate the weight of an object, we need to first calculate its mass by using the appropriate formula and then multiply the mass with the acceleration due to gravity to obtain the weight.
Learn more about cylindrical iron rod:
https://brainly.com/question/24254580
#SPJ4
Question 4 (1 point)
The larynx and nose help humidify, filter, and warm air that enters the lungs.
True
False
True. The larynx and nose both help humidify, filter, and warm air that enters the lungs. The nasal cavity and its hairs help filter out large particles and debris, while the moist mucous membranes within the nose help to humidify the air. Similarly, the larynx helps to warm the air as it passes through on its way to the lungs. These processes help to protect the delicate tissues of the lungs and prevent irritation or damage.
while the ball was in the air, when was the direction of the ball's acceleration in the same direction as its velocity
As soon as the ball hits its highest point, it accelerates in the same direction as its downward velocity.
If the ball's velocity and acceleration are moving in the same direction, the ball is moving faster.
The direction of the ball's acceleration is initially downward (in the opposite direction of its velocity) due to the force of gravity, assuming the ball was thrown uphill and is travelling upward. The speed of the ball decreases owing to gravity as it rises until it reaches its highest point, where it temporarily stops moving.
The direction of the ball's velocity is now downward, and the direction of its acceleration is also downward as it comes back down (in the same direction as its velocity). This happens as a result of the ball falling faster and faster as it approaches the ground due to gravity.
Learn more about accelerates here:
https://brainly.com/question/12550364
#SPJ4
The figure provided shows the production possibilities for Alabama and Georgia.a) Compared to autarky, the gain in world production from specialization is _____ bushels of peaches.b) Compared to autarky, the gain in world production from specialization is _____ bushels of tomatoes.
Compared to autarky, the gain in world production from specialization is 40 bushels of peaches Compared to autarky, the gain in world production from specialization is 80 bushels of tomatoes.
What is specialization?Specialization is the process of focusing a person's skills and resources on a particular area of knowledge or activity. It is a form of division of labor that involves the development of expertise in a particular field, allowing for greater efficiency and productivity in that field. Specialization can involve any number of areas, including academic disciplines, occupations, industries, and activities. Specialization can involve focusing on a specific aspect of a field or a combination of several areas. For example, a doctor may specialize in a particular medical field, or an engineer may specialize in a particular type of engineering. Specialization can also involve the development of skills in an area of expertise, such as programming or marketing.
To learn more about specialization
https://brainly.com/question/30279844
#SPJ1
A car with mass m possesses momentum of magnitude p. Which expression correctly represents the kinetic energy, KE, of the car in terms of m and p?
with the momentum of a body is given as P= m v
A car with mass m has a momentum of magnitude p. The kinetic energy, KE, of the car in terms of m and p can be represented as E = p²/2m.
How does kinetic energy relate to momentum?In contrast to momentum, which is an object's mass in motion, kinetic energy is the energy that any substance has as it accelerates. The relationship between kinetic energy and momentum exists because of how they relate to mass and velocity.
Are kinetic energy and momentum equivalent?Kinetic energy and momentum are sometimes confused. Although they are both correlated with an object's mass and velocity (or speed), momentum is a vector number that indicates how much mass is moving. Kinetic energy is a scalar quantity that represents the energy of motion in an object.
To learn more about momentum visit:
brainly.com/question/2193212
#SPJ1
which of the following is not a phase of the moon? which of the following is not a phase of the moon? new moon full moon third-quarter moon half moon first-quarter moon
The Moon half moon is not a phase of moon. Option d is correct answer.
The phases of the moon are determined by the relative positions of the moon, Earth, and the sun, as seen from Earth. The new moon occurs when the moon is between the Earth and the sun, and its dark side is facing Earth.
The full moon occurs when the Earth is between the moon and the sun, and the entire illuminated side of the moon is visible from Earth. The first-quarter and third-quarter moons occur when the moon is at a 90-degree angle with respect to the Earth and the sun. Therefore, moon half moon is not a phase of the moon.
To know more about the phase of the moon, here
brainly.com/question/2285324
#SPJ4
--The complete question is, Which of the following is not a phase of the moon?
a. new moon
b. full moon
c. third-quarter
d. moon half moon
e. first-quarter moon--
In Canadian football, after a touchdown the team has the opportunity to earn one more point by kicking the ball over the bar between the goal posts. The bar is 10.0 ft above the ground, and the ball is kicked from ground level, 36.0 ft horizontally from the bar in (Figure 1) . Football regulations are stated in English units, but convert to SI units for this problem.
A)There is a minimum angle above the ground such that if the ball is launched below this angle, it can never clear the bar, no matter how fast it is kicked. What is this angle? ===15.5
B) If the ball is kicked at 46.0 ∘ above the horizontal, what must its initial speed be if it is just to clear the bar? Express your answer in m/s.
(a) The minimum angle above the ground is approximately 16.4°. (B) The initial speed required for the ball to just clear the bar when kicked at 46.0° above the horizontal is approximately 17.4 m/s.
The initial potential energy of the ball equal to the kinetic energy,
mgh = (1/2)mv^2
where m is the mass of the ball, g is acceleration due to gravity, h is the height of the bar above the ground, v is the velocity of the ball.
m(9.81 m/s²)(3.048 m) = (1/2)m v^2
v = √(2g(3.048 m)) = 7.67 m/s
The corresponding launch angle,
θ = sin⁻¹(h/d)
where d is the horizontal distance between the ball and the bar.
θ = sin⁻¹(3.048 m / 10.973 m) = 16.4°
B) The ball has kinetic energy and potential energy,
mgh + (1/2)mv₀² = (1/2)mv²
where v₀ is the initial velocity of the ball, and v is the velocity of the ball just as it clears the bar.
v₀ = √(v² - 2gh)
v₀ = √[(7.67 m/s)² - 2(9.81 m/s²)(3.048 m / sin(46.0°))]
v₀ = 17.4 m/s (to three significant figures)
To know more about the velocity, here
brainly.com/question/13639113
#SPJ4
which of these is a non-current liability? multiple choice question. note payable due in 5 months common stock mortgage payable due in 20 years accounts payable
The non-current liability is mortgage payable due in 20 years. Option c is the correct answer.
A liability is a debt or obligation that a company owes to another party. Current liabilities are those that are due within one year, while non-current liabilities are those that are due beyond one year.
a. is a current liability because it is due within one year.
b. is not a liability. It represents ownership in the company and does not have a due date or obligation to pay.
c. mortgage payable due in 20 years is a non-current liability because it is due beyond one year.
d. accounts payable is a current liability because it represents the amount a company owes to its suppliers that have been purchased on credit and are due to be paid.
To know more about the non-current liability, here
brainly.com/question/29352116
#SPJ4
If the solar constant is 1366 W/m2 and the solar zenith angle is 60°, the incoming shortwave radiation is W/m2. If the albedo is 0.1, the reflected shortwave radiation is W/m2.
Incoming shortwave radiation is 683 [tex]W/m^2[/tex] and reflected shortwave radiation is 68.3 [tex]W/m^2[/tex].
The incoming shortwave radiation, or solar irradiance, is the amount of solar energy that reaches the Earth's surface per unit area. It depends on factors such as the solar constant and the solar zenith angle.
If the solar constant is 1366 W/m2 and the solar zenith angle is 60°, we can use the cosine of the solar zenith angle to calculate the incoming shortwave radiation:
Incoming shortwave radiation = solar constant × cos(zenith angle)
= 1366 W/m2 × cos(60°)
= 683 W/m2
Therefore, the incoming shortwave radiation is 683 W/m2.
The albedo is the fraction of incoming solar radiation that is reflected by the Earth's surface. If the albedo is 0.1, this means that 10% of the incoming solar radiation is reflected. We can use this to calculate the reflected shortwave radiation:
Reflected shortwave radiation = albedo × incoming shortwave radiation
= 0.1 × 683 W/m2
= 68.3 W/m2
Learn more about radiation here:
https://brainly.com/question/4072364
#SPJ4
that [the moons of jupiter] revolve in unequal circles is manifestly deduced from the fact that at the longest elongation from jupiter it is never possible to see two of these moons in conjunction, whereas in the vicinity of jupiter they are found united two, three, and sometimes all four together.
This is an: Inductive argument / Causal inference
What is an inductive argument?A sort of argument known as an inductive argument is one in which the premises support the conclusion without necessarily proving it to be true. The foundation of inductive arguments is a generalization or a likely conclusion that results from observations, experiences, or patterns. These justifications are frequently employed to make predictions or draw conclusions about a group or a circumstance in both scientific research and daily life. However, fresh data or experiences may contradict or refute the generalization, making inductive reasoning flawed. Therefore, rather than being certain to be true, an inductive argument's power resides in how likely it is to be true.
To know more about inductive arguments, check out:
https://brainly.com/question/24076176
#SPJ4