Using the count data and observational data you acquired, calculate the number of CFUs in the original sample. Number of CFUs = ____ CFUS You discover that the plate you selected had only been inoculated with 0.1mL of the dilution instead of 1ml. Using the count data and observational data you acquired, re-calculate the number of CFUs in the original sample. Number of CFUS = ____ CFUS

Ca + Cl₂ ⇒ CaCl₂ equation represents this chemical reaction. Therefore, option C is correct.

The term chemical reaction is defined as a process that alters one or more substances, called as reactants, to one or more various substances, called as products.

Chemical changes occur when bonds are broken and produce between molecules or atoms.That means that one substance with a certain set of properties is convert into a different substance with different properties.

The reaction of Calcium metal (Ca) and chlorine gas (Cl₂) react with each other to form calcium chloride (CaCl₂) is Ca + Cl₂ ⇒ CaCl₂ .

Thus, option C is correct.

To learn more about the chemical reaction, follow the link;

https://brainly.com/question/22817140

#SPJ9

The frequency of photon released for an ionized helium atom during transition from second to the first orbit is 9.89 x 10^15 Hz.

The energy of a photon is given by Rydberg formula,

[tex]\dfrac{1}{\lambda} = R [\[\dfrac{1}{n_1^2} - \dfrac{1}{n_2^2}\]][/tex]

where λ is wavelength, R is the Rydberg constant, n1, n2 are the initial and final quantum numbers.

For a transition from the second to first orbit, n1 = 2 and n2 = 1.

Using Rydberg formula,

[tex]\dfrac{1}{\lambda} = 1.0974 \times 10^7 [\[\dfrac{1}{2^2} - \dfrac{1}{1^2}\]][/tex]

Solving for λ,

λ = (4/3R) = 30.37 nm

The frequency of the photon,

ν = c/λ

where c is the speed of light and ν is the frequency.

Frequency = ν = c/λ

= (3.00 x 10^8 m/s) / (30.37 x 10^-9 m)

= 9.89 x 10^15 Hz

To know more about the photons, here

brainly.com/question/13436020

#SPJ4

--The complete question is, Calculate the frequency of the photon released for an ionized helium atom (it has a single electron) when the electron transitions from second orbit to first orbit.--

The percent ionization for propionic acid in each of cases are given below:

Part A. 0.704%

Part B. 1.31%

Part C. 2.61 %

Percent ionization is defined as the quantity of a weak acid that ionizes in a solution expressed as a percentage.

Percent ionization can be calculated using the following expression.

α% = √(Ka/Ca) × 100%

where,

α% is the percent ionization.

Ka is the acid dissociation constant (1.34 × 10⁻⁵ for propionic acid).

Ca is the concentration of the acid.

For Part A. 0.250 M

α% = √(1.34 × 10⁻⁵/0.250) × 100% = 0.704%

Part B. 7.84 × 10⁻² M

α% = √(1.34 × 10⁻⁵/7.74 × 10⁻²) × 100% = 1.31 %

Part C. 1.97 × 10⁻² M

α% = √(1.34 × 10⁻⁵/2.03 × 10⁻²) × 100% = 2.61 %

Learn more about ionization from the link given below.

https://brainly.com/question/8907473

#SPJ4

Among the options provided, the compound that would be expected to have the lowest solubility in water is (D.) BaSO4 (barium sulfate)

The solubility of a compound in water depends on its ability to interact with water molecules. Compounds that can form strong interactions with water, such as through hydrogen bonding, tend to be more soluble in water. On the other hand, compounds that cannot form strong interactions with water tend to be less soluble.

BaSO₄ (barium sulfate) have the lowest solubility in water. This is because BaSO₄ is a salt of a strong base (Ba (OH)₂) and a weak acid (H2SO₄), which makes it a weak electrolyte. As a result, it does not dissociate easily in water, and its ions do not interact strongly with water molecules. Additionally, BaSO₄ is an ionic compound with a large lattice energy, which further reduces its solubility in water.

In contrast, CsI, KCl, and NaBr are all ionic compounds that can easily dissociate in water, forming ions that can interact with water molecules through ion-dipole interactions. RbOH is a polar covalent compound that can form hydrogen bonds with water molecules, which also makes it relatively more soluble in water.

To know more about hydrogen bonds, visit:

https://brainly.com/question/10904296

#SPJ1

RbF is expected to have the largest difference between the experimental and ideal Van 't Hoff factors. Because RbF has a very high lattice energy due to the small size of the F- ion, making it more difficult for the ions to dissociate in water. Option D is correct.

The Van 't Hoff factor (i) is a measure of the number of particles into which a solute dissociates in a solution. The ideal Van 't Hoff factor (i) is the value expected for a completely dissociated solute, while the experimental Van 't Hoff factor (i) is the value determined by experiments.

For ionic compounds that dissociate in water, the experimental Van 't Hoff factor is often less than the ideal value due to ion pairing or other interactions that reduce the effective number of ions in solution.

The size of the difference between the experimental and ideal Van 't Hoff factors depends on the degree of ion pairing or other interactions in solution. The degree of ion pairing or other interactions in solution is influenced by factors such as the size and charge of the ions, as well as the solvent.

To know more about Van 't Hoff factors here

https://brainly.com/question/1748231

#SPJ4

The expression which is true regarding the equilibrium of the reaction is

[CO] = [H₂] = [CH₃OH]. Hence, option d is correct.

A reaction is said to at equilibrium when the rate of forward reaction and backward reaction are the same. The number of reacting species in the reactant side must be equal to the number of reacting species in the product side.

Here, the reaction of carbon monoxide and hydrogen gas to give methanol is given below:

[tex]\rm CO + 2H_{2} \rightarrow CH_{3}OH[/tex]

At, equilibrium, the concentration of all the reactants and products will be the same.

Therefore,

[CO] = [H₂] = [CH₃OH]

Hence, option d is correct.

Find more on equilibrium:

https://brainly.com/question/30693676

#SPJ1

To calculate the molecular mass of a compound, you need:

The atomic weight of each component of the compound.

Therefore, you need to select the following:

The atomic weight of each component of the compound

You do not need the mass of a sample of the compound or the physical properties of the compound to calculate its molecular mass. The molecular mass of a compound is the sum of the atomic masses of all the atoms in a molecule of that compound. It is also known as the molecular weight of the compound.

Learn more about molecular mass of a compound here:

https://brainly.com/question/3182776

#SPJ4

Answer: The formula of the compound

The atomic masses of each of the elements that make up the compound

Explanation:

The rate of a reaction depends upon the concentration of the reactants. If a compound is being consumed in a reaction, the rate constant for that compound decreases.

The rate constant or specific reaction rate of the reaction at a given temperature is defined as the rate of the reaction when the molar concentration of each of the reactants is unity.

The reaction rate is directly related to rate constant. The rate of a reaction decreases as the concentration of the reactants decreases with time. Here since the reactants are consumed, then the rate constant decreases.

Thus If a compound is being consumed, rate constant decreases.

To know more about rate constant, visit;

https://brainly.com/question/24658842

#SPJ1

Answer:

Hydrogen chloride (HCl) is a covalent compound, meaning it shares electrons between atoms to form a bond. However, when HCl is dissolved in water, it dissociates into H+ and Cl- ions through a process called ionization. This ionization occurs because water is a polar solvent, meaning it has a partial positive charge on one end and a partial negative charge on the other end. The positive end of water molecules attracts the negatively charged Cl- ion, while the negative end of water molecules attracts the positively charged H+ ion, causing HCl to dissociate.

The ionization of HCl in water allows it to conduct electricity because the H+ and Cl- ions are free to move and carry electrical charge. This is why HCl is considered an electrolyte when dissolved in water, despite being covalent in its pure form.

In contrast, acetic acid (CH3COOH) is also a covalent compound that can ionize in water to some extent. However, it does not fully dissociate into ions like HCl does, meaning its conductivity in water is lower than that of HCl.

The difference in conductivity between HCl and acetic acid can be explained by their respective acid strengths. HCl is a strong acid, meaning it readily donates its H+ ion in water, while acetic acid is a weak acid, meaning it only partially dissociates in water. The more ions that are present in a solution, the higher its conductivity, so the stronger acid (HCl) has higher conductivity than the weaker acid (acetic acid).

After adding ethlyene glycol to the dissolved 3-nitrophthalic acid the desired temperature for the reaction stays in room temperature.

Ethylene glycol, also defined as ethane-1,2-diol, the simplest member of the glycol family of organic compounds. Generally a glycol is defined as an alcohol with two hydroxyl groups on adjacent carbon atoms (a 1,2-diol). Basically, the common name ethylene glycol literally means “the glycol derived from ethylene.”

Generally, 3-Nitrophthalic acid is readily used as an intermediate during the synthesis of corrosion inhibitors, medicines and agrochemicals. 3-Nitrophthalic acid is readily available for the preparation of dyes, crop protection agents used during organic synthesis.

During the reactions of both of these chemicals the temperature remains at room temperature.

Learn more about 3-Nitrophthalic acid from the link given below.

https://brainly.com/question/20716309

#SPJ4

(a) Kp = 57.2. (b) Equilibrium favors products as Kp > Qp. Forward reaction is favored.

(a) The value of Kp at 450 K can be calculated using the equilibrium expression:

Kp = (PPCl5) / (PPCl3 x PCl2)

Substituting the given equilibrium pressures into this expression, we get:

Kp = (1.14 atm) / (0.122 atm x 0.140 atm) = 57.2

Therefore, the value of Kp at 450 K is 57.2.

(b) To determine whether the equilibrium favors reactants or products, we can compare the calculated value of Kp to the reaction quotient, Qp.

Qp can be calculated in the same way as Kp, using the current partial pressures of the gases at equilibrium. Substituting the given equilibrium pressures, we get:

Qp = (PPCl5) / (PPCl3 x PCl2) = (1.14 atm) / (0.122 atm x 0.140 atm) = 9.23

Since Kp > Qp, the equilibrium favors products. This means that at the given temperature, the forward reaction (formation of PCl5) is favored over the reverse reaction (breakdown of PCl5 into PCl3 and Cl2), and the system has reached a state where the concentrations of products are higher than the concentrations of reactants.

Learn more about partial pressures :

https://brainly.com/question/13199169

#SPJ4

The complete question is :

Phosphorus trichloride gas and chlorine gas react to form phosphorus pentachloride gas. PCl3(g) + Cl2(g) PCl5(g). A gas vessel is charged with a mixture of PCl3(g) and Cl2(g), which is allowed to equilibriate at 450 K. At equilibrium the partial pressures of the three gases are PPCl3 = 0.122 atm, PCl2 = 0.140 atm, and PPCl5 = 1.14 atm.

(a) What is the value of Kp at this temperature?

(b) Does the equilibrium favor reactants or products?

The equilibrium favors products. The equilibrium favors reactants. Neither reactants nor products are favored.

Answer: 21.90 grams HCl  ; 22 g HCl if need correct sig figs

Explanation:

moles = M X L  = 1.5 x .40 =0.60 moles HCl

convert to grams

0.60 X 36.5 = 21.90

Answer:

because it absorbs all colours expect for red,

Explanation: making the red light bounce into your eyes, therefore seeing the colour red

Question 2: The wave transfers its energy to the mineral, I think, thats my best guess

Answer:

1) A.) State(s) of matter present at -120 Degrees Celsius: Solid

B.) State(s) of matter present at 0 Degrees Celsius: Solid and liquid

C.) State(s) of matter present at 78 Degrees Celsius: Liquid and vapor

D.) State(s) of matter present at 100 Degrees Celsius: Vapor

2) At 100 Degrees Celsius, the ethanol molecules will be moving the fastest because this is the temperature at which the boiling point of ethanol occurs, and this is the temperature at which all molecules in the liquid have enough kinetic energy to escape as a gas.

3) To determine the amount of heat exchange of the copper, one needs to know the mass of the sample, the temperature change (25.0 Degrees Celsius to 100.0 Degrees Celsius), and the specific heat capacity of copper. The heat will be absorbed by the copper.

4) To determine the amount of heat exchange of the water, one needs to know the mass of the sample, the temperature change (100 Degrees Celsius to 100 Degrees Celsius), and the specific heat capacity of water. The heat will be released by the water.

5) To determine the amount of heat exchanged, one needs to know the mass of the sample, the temperature change (37 Degrees Celsius to 100 Degrees Celsius), and the specific heat capacity of water. The heat will be absorbed by the water.

The stage that this most accurately describes while using the PCR is the initiation of DNA synthesis, also known as the denaturation stage.

In the denaturation stage of Polymerase Chain Reaction (PCR), the double-stranded DNA template is heated to a high temperature to separate the two complementary strands and create single-stranded DNA. The denaturation stage is the first step in the PCR cycle.

In this stage, the heat-stable DNA polymerase denatures the DNA and the primers anneal to the complementary single-stranded template. This marks the beginning of the extension stage, where the DNA polymerase synthesizes new complementary strands along the template DNA.

Learn more on denaturation stage here: https://brainly.com/question/27493294

#SPJ1

The Establishment of the Molecular Orbitals of NH3. A molecule's electrical structure can be predicted using the Molecular Orbital Theory (MO).

To learn more about Molecular Orbital Theory, refer to:

https://brainly.com/question/26388921

#SPJ4

Answer:

D. Gold and copper

From the table, the two metals which heat up about the same rate are iron and copper. These two metals have about close specific heat of capacities. Thus, they will cool or heat up in closer rates.

Specific heat of capacity of a substance is the heat energy required to raise the temperature by one degree Celsius per one gram. It is an intensive quantity and does not depends on  the amount of the substance.

The specific heat of the substance indicates the rate at which the substance cools down or heats up. It depends on the nature of the substance and its bond type.

Here, the two metals having closer specific heat capacities are iron and copper. Copper has specific heat of 0.39 and iron has 0.46 J/g° C. Hence, they will heats up in about same rates. Therefore, option C is correct.

Find more on specific heat:

https://brainly.com/question/11297584

#SPJ2

The atomic mass of the silver if silver has 2 naturally occurring isotopes with masses and natural abundance is  Ag-107 106.90509 amu 51.84% Ag-109 108.90476 amu 48.46% is  108.19 amu.

The atomic mass of the silver , Ag - 107 =  106.90509 amu

The natural abundance = 51.84 % = 0.5184

The atomic mass of the silver , Ag - 109 = 108.90476 amu

The natural abundance =  48.46 % = 0.4846

The atomic mass = mass of isotopes × natural abundance + mass of isotopes × natural abundance

The atomic mass =  0.5184 × 106.90509 + 0.4846 × 108.90476

The atomic mass =  108.19 amu

To learn more about atomic mass here

https://brainly.com/question/14664137

#SPJ4

46.27 cubic feet  soil are needed to fill the flower box

Given Data

Length of Box = 5.40 feet

Width of Box =  9.52 feet

Depth of Box = 0.9 feet

Let us find the volume of the box

The volume can be found be using the expression below

Volume = L*W*D

Substitute the given data into the expression we have

Volume = 5.40*9.52*0.9

Volume = 46.27 cubic feet

Learn more about Volume here:

https://brainly.com/question/21092361

#SPJ1

The koff value for this reaction is 1.314 s-1

The concentration of bound and unbound ligands can be connected to the dissociation constant (Kd) of the protein-ligand complex using the equilibrium equation shown below:

Kd = (P)(L)/(PL)

Since we know that half of the protein is ligand-bound at equilibrium, [PL] = [P]/2. Moreover, we are aware that [L] = 0.657 nM.

Using these values as a substitute in the equilibrium equation, we obtain:

Kd = [P][L]/[PL] = [P](0.657 nM)/(0.5[P]), which equals 1.314 nM.

The following equation can also be used to link the association (kon) and dissociation (koff) rate constants to the dissociation constant (Kd):

Koff/Kon = Kd

When we solve for koff, we get:

1.314 nM * kon = koff = Kd * kon

We can use a value of 106 M-1s-1 for kon as we are presuming that the kon value is common for protein-ligand interactions. If we substitute this value, we obtain:

koff is equal to 1.314 nM x 106 M-1 s-1 / 1.314 s-1.

therefore, 1.314 s-1 is the koff value for this protein-ligand binding process.

learn more about the dissociation constant

brainly.com/question/28197409

#SPJ4

Answer: A stove that circulates heated air to uniformly cook food is an example of convection heat transfer.

Answer:

c) It has no partially-filled orbitals.

Explanation:

Diamagnetic salts are those that do not contain any partially-filled orbitals in their electronic configuration. This is because the electrons in these salts are paired and cancel each other's magnetic fields, making the compound diamagnetic. The number of electrons or the number of filled orbitals does not determine whether a salt is diamagnetic or not. Rather, it is the presence or absence of partially-filled orbitals that determines this property.

a) Reactants = 2NO, O₂ Products = 2NO₂ b) The balanced chemical equation is, 2NO + O₂ ---> 2NO₂. c) It is a combination reaction.

The Reactants in the reaction are 2NO, O₂ and products in the reaction is 2NO₂. The reaction is a combination reaction. Combination reactions can be exothermic or endothermic, depending on the specific reaction. Exothermic combination reactions release energy, usually in the form of heat or light, while endothermic combination reactions absorb energy.

The balanced chemical equation is, 2NO + O₂ ---> 2NO₂.

If we see the reaction 2NO + O₂ ---> 2NO₂ then we see that two molecules react and formed a single combined compound.

So it is combination reaction.

To know more about the combination reaction, here

brainly.com/question/3664113

#SPJ4

The Correct answer is

The statement A is inconsistent with Dalton's atomic theory as it was originally stated.

What is Dalton Atomic Theory?

Dalton's atomic theory is a scientific theory that was proposed by the English chemist John Dalton in the early 19th century. The theory provides a framework for understanding the behavior and properties of matter at the atomic level, and it is considered one of the foundational theories of modern chemistry.

Dalton's atomic theory is based on a number of postulates, including:

All matter is composed of tiny, indivisible particles called atoms.

Atoms of the same element are identical in mass and properties, but they differ from atoms of other elements.

Chemical reactions involve the rearrangement of atoms, but the atoms themselves are not created or destroyed.

Dalton's atomic theory includes the postulate that atoms are indivisible and cannot be created or destroyed in chemical reactions. Thus, the formation of a compound cannot involve the destruction of atoms.

Statements B, C, and D are consistent with Dalton's atomic theory. Statement B asserts that all atoms of the same element are identical, which is one of the postulates of Dalton's theory. Statement C describes a chemical reaction in which atoms combine to form a molecule, which is also consistent with Dalton's theory. Finally, statement D describes a chemical reaction involving atoms combining in fixed, whole-number ratios, which is another postulate of Dalton's theory. However, it is worth noting that the idea of 0.5 hydrogen atoms in a molecule is not consistent with the idea of indivisible atoms, which is a fundamental principle of Dalton's atomic theory.

Learn more about Dalton Atomic Theory from given link

https://brainly.com/question/13157325

#SPJ4

A radioactive isotope, such as carbon-14, emits energy as rays and subatomic particles.

Radioactive isotopes, also known as radioisotopes, radionuclides, or radioactive nuclides, are any of several species of the same chemical element with different masses and unstable nuclei that work to dissipate excess energy by spontaneously emitting radiation in alpha, beta, and gamma forms .

More than 1,800 radioactive isotopes of various elements are known. Some of them are found in nature; the rest are produced artificially as direct products of nuclear reactions or indirectly as radioactive derivatives of these products.

There are several sources of radioactive isotopes. Some radioactive isotopes are present as terrestrial radiation. The radioactive isotopes radium, thorium, and uranium, for example, are found naturally in rocks and soil. Uranium and thorium also occur in small amounts in water. Radon, which is produced by the radioactive decay of radium, is abundant in the air.

Other radioactive isotopes are produced by humans in nuclear reactions, which produce unstable combinations of neutrons and protons. One way to artificially induce nuclear transmutation is by bombarding stable isotopes with alpha particles.

Your question is incomplete but most probably your full question was:

Select all that apply. A radioactive isotope (ex. carbon 14) emits energy as which of the

following?

-Rays

-subatomic particles

-Heat

-light

Learn more about Radioactive isotope at

https://brainly.com/question/1907960

#SPJ4

The molar mass of a compound can be calculated from the number of atoms present in the compound and the atomic masses of elements. The molar mass of KOH is 56 g/mol.

The molar mass of a compound is the mass of one mole of the compound. One mole of a compound contains 6.02 × 10²³ molecules. This number is called Avogadro number.

The molar mass of a compound is the sum of masses of its atoms.

The atomic mass of Cl = 35.5 g/mol

Atomic mass of K = 39 g/mol

atomic mass of H = 1 g/mol and mass O = 16 g/mol.

Hence, molar mass of KOH = 1 + 39 + 16 = 56 g/mol

Mass of Be = 9 g/mol

mass of Cl = 35.5 g/mol

then molar mass of BeCl₂ = (35.5 × 2) + 9 =80 g/mol

Mass of Fe = 55.8 g/mol

molar mass of FeCl₃ = (35.5 × 3) + 55.8 = 162.3 g/mol.

Mass of B = 11 g/mol

mass of F = 19 g/mol

then, molar mass of BF₃ = 11 + (19 × 3) = 68 g/mol

In a similar way, the molar mass of all the given compounds can be determined using atomic masses of constituent elements.

Find more on molar mass:

brainly.com/question/12127540

#SPJ1

If the temperature is raised while maintaining a constant pressure of 100 atm, CO2 will transition from a solid to a liquid, then from a liquid to a supercritical fluid, and lastly to a gas. This is the fourth of four targets.

Heat energy will logically go from a warmer (body with a high temp) to the a cooler (body with a low temp) according to temperature (one at a lower temperature). How cold or hot something is can be expressed numerically using the physiological concept of temperature. A thermometer is used to determine temperature. Thermometers were calibrated using various temperature scales that historically specified unique reference points & thermometric materials.

It is measured in joules. Heat will therefore serve as a gauge for the flow or movement of energy. You must be aware of the fact that an object will receive or lose heat but not have heat if you want to comprehend the distinction between heat and temperature. It can therefore be referred to as a measure of change. The concepts of temperature and heat are very dissimilar. a thermometer with Farenheit and Celsius scales. The average molecular kinetic energy of a substance is measured by its temperature. The temperature of something is a statement about how quickly the molecules are moving within that object.

Target 1 of 4 is the phase shifts that happen when CO2 is heated from 190 K to 350 K at a constant pressure of 1 atm. It is known as sublimation when CO2 changes its phase at 1 atm from a solid (dry ice) to a gas (carbon dioxide vapor) without going through the liquid phase.

CO2 will experience a separate set of phase shifts when subjected to pressures greater than 1 atm. CO2 will change its state from a solid to a liquid at 5.1 atm constant pressure, and then from a liquid to a gas when the temperature rises. This is the second of four targets.

When the temperature is raised, CO2 will transition from a solid to a liquid at a constant pressure of 10 atm, and then from a liquid to a supercritical fluid. This is the third of four targets.

To know more about Temperature visit:

https://brainly.com/question/12165495

#SPJ4

The kind of study is a cohort study.

A cohort study is a type of observational study in which a group of individuals (the cohort) with a common characteristic or experience are followed over a period of time to investigate the development of a particular health outcome or disease.

Cohort studies can be prospective (following the cohort from the present into the future) or retrospective (looking back in time to study past exposures and outcomes). They can be used to examine the incidence, prevalence, and risk factors of diseases, and are particularly useful for investigating rare exposures or outcomes.

Learn more about Cohort study:https://brainly.com/question/9429879

#SPJ1

a) Electric field is, 2.26 × 10⁷ N/C b) After inserting the metallic plate electric field remains the same, E = 2.26 × 10⁷ N/C. (c) The charge density on the upper surface is 2.0 × 10⁵ C/m², lower surface of the thick plate is zero.

The electric field between the plates can be found using the formula E = σ/ε₀, where σ is the charge density on each plate and ε₀ is the permittivity of free space.

E = σ/ε₀ = (2.0 × 10⁵ C/m²) / (8.85 × 10⁻¹² F/m) ≈ 2.26 × 10⁷ N/C

When the neutral plate is inserted, the electric field inside the plate is zero because the charges in the plate rearrange themselves in response to the electric field from the other two plates, resulting in a net electric field of zero inside the plate.

E = σ/ε₀ = (2.0 × 10⁵ C/m²) / (8.85 × 10⁻¹² F/m) ≈ 2.26 × 10⁷ N/C

The charge density on the upper surface of the thick plate is also 2.0 × 10⁵ C/m². The charge density on the lower surface of the thick plate is zero, since it is in contact with the neutral plate and no charges can flow through it.

To know more about the electric field, here

brainly.com/question/15800304

#SPJ4

--The complete question is, Consider two large parallel metallic plates with uniform, opposite charge distributions. Suppose that the magnitude of the charge density on each plate is 2.0 × 10¬5 C/m². The upper plate is positive and the lower negative.

(a) What is the magnitude of the electric field in the region between the plates?

(b) You now insert a neutral large parallel metallic plate in the space between the two charged plates. Suppose that this plate is 1.0 cm thick. What is the magnitude of the electric field inside this thick plate? What is the magnitude of the electric field in the remaining space above and below this thick plate?

(c) What is the charge density on the upper surface of the thick plate? The lower surface?--

An acylation phase and a diacylation phase are the first two phases of the reaction. The peptide bond is broken and an ester is created between the substrate and enzyme in the first phase.

To learn more about enzyme, refer to:

brainly.com/question/2536131

#SPJ4