The high temperatures in the core of the sun come from immense gravitational force.
The Sun will expand to approximately 100 times its current size.
The Sun's final composition will be a cold, dense black dwarf, made up of carbon, oxygen.
The future of the Sun can be described as a continuous battle between the pressure created by fusion and the force of gravity. In the Sun's core, fusion occurs, converting hydrogen into helium and mass into energy in the form of gamma ray radiation. This fusion process creates immense pressure that counteracts the force of gravity trying to compress the Sun into a tiny sphere.
The high temperatures in the core, which enable fusion to occur, come from the immense gravitational force acting on the Sun's matter. As the Sun uses up its hydrogen fuel, it will enter different stages of its life cycle, expanding and shrinking in size.
Eventually, the Sun will exhaust its hydrogen fuel in the core and start burning hydrogen in a shell around the core. This will cause the Sun to expand into a red giant, becoming much larger than its current size. The outer layers will eventually be expelled, forming a planetary nebula.
As the core continues to contract under gravity, it will heat up and begin fusing helium into heavier elements, such as carbon and oxygen. Once the helium is exhausted, the core will no longer have sufficient pressure to counteract gravity, and the Sun will collapse into a white dwarf. Over time, the white dwarf will cool and become a black dwarf.
In summary, the Sun's life cycle involves a constant struggle between fusion pressure and gravitational force, which causes it to expand and contract through different stages.
The Sun's final composition will be a cold, dense black dwarf, made up of carbon, oxygen, and other heavier elements.
From afar, we would see the Sun expand to approximately 100 times its current size before shrinking back down to the size of a white dwarf.
To learn more about the Sun, visit:
https://brainly.com/question/28248963
#SPJ11
The coils in a motor have a resistance of 0.14 Ω and are driven by an EMF of 62 V.
The back EMF induced in the motor is 37 V. Calculate the difference in power
required by the motor at start up and at operating speed
The difference in the power required by the motor at start up and at operating speed is 9778.57
What is power?This is defined as the rate in which energy is consumed. Electrical power is expressed mathematically as:
Power (P) = voltage (V) × current (I)
P = IV
Power = square voltage (V²) / resistance ®
P = V² / R
How to determine the power by the EMFVoltage (V) = 37 VResistance (R) = 0.14 Ω Power by EMF (P₁) =?P = V² / R
P₁ = 62² / 0.14
P₁ = 27457.14 watts
How to determine the power by the back EMFVoltage (V) = 62 VResistance (R) = 0.14 Ω Power by back EMF (P₂) =?P = V² / R
P₂ = 37² / 0.14
P₂ = 9778.57 watts
How to determine the power differencePower by EMF (P₁) = 27457.14 wattsPower by back EMF (P₂) = 9778.57 wattsDifference in power =?Difference = P₁ - P₂
Difference in power = 27457.14 - 9778.57
Difference in power = 17678.57 watts
Learn more about electrical power:
https://brainly.com/question/64224
#SPJ1
Which of the following is an example of a primary source?
Answer:
An article written by a scientist .
Explanation:
Primary sources information are those that contain first hand information probably from the place of the activities or by the original contact of the information (source ) .
So primary information is normally contained in artifact , journals , letter , dissertations manuscripts , videos and audio recordings .
The fact that the article is written by the scientist means he is the one who has the original information hence he is the first person to access the information , meaning he is the original owner .
Which mineral property is the least useful for identifying minerals, and why?
If m=2000 p=2. 25 and y=6000 what is velocity
The velocity of the money at the given price, and amount of money in the time frame is 6.75.
What is Velocity of money?The velocity of money is a measurement of the rate at which money is exchanged in an economy.
It is the number of times that money moves from one entity to another.
It also refers to how much a unit of currency is used in a given period of time.
MV = PY
V = PY/M
where;
P is priceY is transaction in time frameM is amount of moneySubstitute the given parameters and solve for velocity;
V = (2.25 x 6000) / 2000
V = 6.75
Thus, the velocity of the money at the given price, and amount of money in the time frame is 6.75.
Learn more about velocity of money here: https://brainly.com/question/15125176
#SPJ1
(d) A force of 30 N is required to accelerate a skateboard at 1.5 m/s². How much force
would accelerate the same skateboard at 6.0 m/s²?
Answer:
[tex]\huge\boxed{\sf F = 120\ N}[/tex]
Explanation:
Firstly, we need to find the mass of the skateboard.
Using formula:
F = maWhere,
Force = f = 30 NAcceleration = a = 1.5 m/s²30 = m (1.5)
Divide 1.5 to both sides
30/1.5 kg = m
20 kg = m
m = 20 kgNow, finding the force:Using the same formula.
F = maWhere,
mass = m = 20 kgAcceleration = a = 6 m/s²F = (20)(6)
F = 120 N[tex]\rule[225]{225}{2}[/tex]
For elevator questions, does the weight of a person increase when the elevator is going up or if it's going down-
The weight of a person increase when the elevator is going up.
Weight of the person in the elevator
The weight of the person in the elevator is calculated as follows;
When the person is going upF = ma + mg
F = m(a + g)
where;
a is acceleration of the persong is acceleration due to gravityWhen the person is going downF = mg - ma
F = m(g - a)
Thus, the weight of a person increase when the elevator is going up.
Learn more about weight here: https://brainly.com/question/2337612
#SPJ1
An inductance L and a resistance R are connected in series to an ideal battery. A switch in the circuit is closed at time t
Maximum energy stored at the time t = (L/R) ln 2 after the switch is closed
The magnetic field stops expanding when the current in a practical inductor achieves its steady-state value of Im = E/R. The power p = vi is also 0 because the voltage across the inductor has fallen to zero. As a result, the inductor's ability to store energy grows only as the current approaches its steady-state value.
The magnetic field's maximum stored energy is constant when the current is stable. The inductance of the practical inductor does not store any extra energy, but the inductor's resistance continuously loses energy. The magnetic field must continue to exist. current.
The area under the power curve represents the maximum energy stored by the inductance and is equal to the product of the average power and the elapsed time.
To learn more about Maximum stored energy please visit-
https://brainly.com/question/14103175
#SPJ1
A star is moving toward the earth at 250 km/s. What can you say about the wavelength of the h-alpha absorption line that you would detect in the star's spectrum?
The wavelength of the h-alpha absorption line that you would detect in the star's spectrum will be 54.67 * [tex]10^{-2}[/tex] nm
If the object is moving towards or away from us with some radial velocity, shifts can be observed in the location of the absorption
since, material is moving towards us a shift to shorter wavelength will be observed
shift = rest wavelength * ( radial velocity / speed of light )
= 656 * [tex]10^{-9}[/tex] * (250 * [tex]10^{3}[/tex] / 3 * [tex]10^{8}[/tex] )
= 54.67 * [tex]10^{-2}[/tex] nm
The wavelength of the h-alpha absorption line that you would detect in the star's spectrum will be 54.67 * [tex]10^{-2}[/tex] nm
learn more about radial velocity:
https://brainly.com/question/22409504?referrer=searchResults
#SPJ4
Calculate the net force on particle q1. First, find the direction of the force particle q2 is exerting on particle q1. Is it pushing to the right, or to the left?
The net force on particle particle q1 is 13.06 N towards the left.
Force on q1 due to q2
F(12) = kq₁q₂/r₂
F(12) = (9 x 10⁹ x 13 x 10⁻⁶ x 7.7 x 10⁻⁶)/(0.25²)
F(12) = -14.41 N (towards left)
Force on q1 due to q3F(13) = (9 x 10⁹ x 7.7 x 10⁻⁶ x 5.9 x 10⁻⁶)/(0.55²)
F(13) = 1.352 N (towards right)
Net force on q1F(net) = 1.352 N - 14.41 N
F(net) = -13.06 N
Thus, the net force on particle particle q1 is 13.06 N towards the left.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
Answer:
its +
Explanation:
An RL series circuit is connected to an ac generator with a maximum emf of 20 V. If the maximum potential difference across the resistor is 16 V, then the maximum potential difference across the inductor is:
If the maximum emf of the ac generator is 20 V and the maximum potential difference across the resistor is 16 V Then the maximum potential difference across the inductor is 4 V.
Calculation:
Step-1:
It is given that the RL circuit is connected to a 20 V ac generator. The maximum potential difference across the resistor is 16 V. It is required to find the maximum potential drop across the inductor.
Step-2:
The maximum emf of the generator is equal to the sum of the maximum potential difference across the resistor and the maximum potential difference across the inductor.
Therefore,
The maximum potential difference across the inductor + Maximum maximum potential difference across the resistor = Maximum emf of the generator
Thus,
Maximum maximum potential difference across the inductor + 16 V = 20 V
Therefore,
Maximum maximum potential difference across the inductor = 20 V - 16 V = 4 V
Learn more about potential differences across resistor and inductor here,
https://brainly.com/question/15715072
#SPJ4
A mass m is attached to an ideal massless spring. When this system is set in motion with amplitude a, it has a period t. What is the period if the amplitude of the motion is increased to 2a?.
The period remains the same if the amplitude of the motion is increased to 2a
What is Time period?
The time period is the time taken by a complete cycle of the wave to pass a point.
The equation of the period for spring is:
[tex]T = 2\pi \sqrt{\frac{m}{k} }[/tex]
Where,
Time period = T
mass of system = M
k is the spring constant
Amplitude of the motion is a
From the equation we can say that,
The period of a spring-mass system is proportional to the square root of the mass and inversely proportional to the square root of the spring constant.
Now if we increase the amplitude of the motion to 2a, the period of time remains the same.
Because the time period is not dependent on amplitude, it is independent of a.
Hence,
The period remains the same if the amplitude of the motion is increased to 2a.
Learn more about period of spring here:
https://brainly.com/question/20629494
#SPJ4
A vendor hangs an 8.0 kg sign in front of his shop with a cable held away from the building by a lightweight pole. The pole is free to pivot about the end where it touches the wall, as shown in (Figure 1).
The tension in the cable is 156.8 N.
What's the weight of the sign board?Weight of the sign board is mass × acceleration due to gravity
= 8 × 9.8 = 78.4 N
What's the vertical component of tension in the string or along the opposite direction of weight?If T is the tension in the string, T× cos 60° is the vertical component of it.
What's the tension in the string?As the vertical component of the string is along opposite to the weight of the sign board, so weight= T× cos 60°T= 78.4/cos 60° = 156.8 N.Thus, we can conclude that the tension in the cable is 156.8 N.
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: A vendor hangs an 8.0 kg sign in front of his shop with a cable held away from the building by lightweight pole. The pole is free to pivot about the end where it touches the wall. What is the tension in the cable?
Learn more about the tensional force here:
brainly.com/question/2008782
#SPJ1
iron mining in south africa
Answer:
In 2021, South Africa's production of iron ore amounted to an estimated 61 million metric tons. South Africa is one of the world's largest producers of iron ore. As of 2021, South Africa was the ninth-largest iron ore producing country in the world.Use Hooke's Law to determine the variable force in the spring problem. A force of 7 pounds compresses a 15-inch spring a total of 3 inches. How much work is done in compressing the spring 7 inches
Work done in compressing spring = 40.833
It simply needs a three-inch compression by applying a compressive force to a 15-inch long spring. we know that F(x)=kx. To act in displacement X and the poles' values cannot be substituted. Consequently, there will be 4. The spring constant K is therefore equal to 5, so. Three fit within this slot. We consequently derive the compressing spring constant K from this. , which is 5, 3. Now change this formula to include the value of the compressing spring constant. Four f will therefore equal 5.3 x and vice versa. Integration of four factors equals W.
In order to ensure the limit and further all of this, we currently have the range 0–7. Thus, this compressing spring task is completed. W is equal to 40.833
To learn more about Compressing spring please visit
https://brainly.com/question/14770700
#SPJ1
What is the formula of the force??
F = ma
☆...hope this helps...☆
_♡_mashi_♡_
Answer:
F = MA
Force (Newtons) = Mass (Kilograms) x Acceleration (m/s^2)
Brainliest, please :)
A 7.7 V power supply is connected to a 79 Ohm resistor and a 87 Ohm resistor in parallel. What is the total current through the circuit? Round your answer to 2 decimal places.
The total current through the circuit is 0. 19A
How to determine the currentWe have the formula for power to be;
Current, I = V/R
Voltage = 7. 7V
Resistance in parallel = R1R2/ R1 + r2
Resistance in parallel = [tex]\frac{79 * 87}{87 + 79}[/tex] = [tex]\frac{6873}{166}[/tex] = 41. 40 Ohms
Current = [tex]\frac{7. 7}{41. 40}[/tex] = 0. 19 A
Thus, the total current through the circuit is 0. 19A
Learn more about voltage here:
https://brainly.com/question/14883923
#SPJ1
A 16.0 kg crate rests on a shelf 1.80 m above the floor in a warehouse. A forklift is used to raise the crate to a shelf 3.30 m above the warehouse floor. What is the increase in potential energy of the crate?
Group of answer choices
a. 240 J
b. 250 J
c. 230 J
d. 260 J
A 16.0 kg crate increases in height from 1.80 m to 3.30 m above the floor. The increase in potential energy is 240 J (a).
What is potential energy?It is the energy due to the position.
A 16.0 kg (m) crate rests on a shelf 1.80 m (h₁) above the floor in a warehouse. The potential energy is:
U₁ = m × g × h₁ = 16.0 kg × (9.81 m/s²) × 1.80 m = 283 J
A forklift is used to raise the crate to a shelf 3.30 m (h₂) above the warehouse floor. The potential energy is:
U₂ = m × g × h₂ = 16.0 kg × (9.81 m/s²) × 3.30 m = 518 J
The increase in the potential energy is:
518 J - 283 J = 235 J ≈ 240 J
A 16.0 kg crate increases in height from 1.80 m to 3.30 m above the floor. The increase in potential energy is 240 J (a).
Learn more about potential energy here: https://brainly.com/question/23979653
#SPJ1
13. Which compound is most reactive?
ethene
ethyne
ethane
Answer:
Ethyne consists of a triple bond that is most easier to be broken as compared to that of ethyne with a double bond and benzene single bonds. Therefore ethyne is most reactive among the given options.
Explanation:
Answer: Ethyne
Explanation:
Basic elements for every contract include
1) an offer,
2) acceptance,
3) ___________,
4) with legal capacity, for a legal purpose
The basic elements for every contract include
1) an offer,
2) acceptance,
3) Awareness
4) with legal capacity, for a legal purpose
What is a contract?A contract is an agreement between two or more parties, to perform a specific job or duty. A contract is usually temporary or of fixed duration and usually governed by a written agreement.
The basic elements every contract should contain are as follows:
An offer, which encompasses the duties and responsibilities of each partyAcceptance; the offeree must decide whether to accept or reject the proposal/offer. Awareness; for a contract to be binding, the involved parties must first be aware that they are entering into an agreementLegal capacity; all contracts are subject to the laws of the jurisdiction in which they operateLearn more about contract at: https://brainly.com/question/2669219
#SPJ1
And instead of tolling the bell, for church, our little sexton – sings. what is the most likely reason for the poet to oppose the phrases "tolling the bell" and "sings" in these lines? the poet is expressing her belief that the second, more natural option is far more desirable than the first option. the poet is hinting that religious worship should be considered a gloomy and serious activity. the poet is suggesting that those who worship in nature are more formal than those who worship in church. the poet is contrasting her attitude about religion with her feelings about the natural world, which remains largely unappreciated.
The poet is expressing her belief that the second, more natural option is far more desirable than the first option.
What is the summary of some keep the sabbath going to church?Some hold the Sabbath going to Church is set faith and meditation.
The poem explores the idea of spiritual practices in Christianity.
It additionally illustrates the speaker's angle in the direction of those practices.
According to this, it's far obligatory to put on a surplice even as attending church services.
While she wears her casual get dressed and prays to God, Some hold the Sabbath going to Church –' is one in every of Emily Dickinson's best-recognized poems.
It functions her aim to are seeking for salvation without resorting to the traditional means.
hence,
The most likely reason for the poet to oppose the phrases "tolling the bell" and "sings" in these lines is the poet is expressing her belief that the second, more natural option is far more desirable than the first option.
Thus, option "A" is correct.
Learn more about "some keep the sabbath going to church" refer link :
https://brainly.com/question/10206618
#SPJ4
Answer:
(A)The poet is expressing her belief that the second, more natural option is far more desirable than the first option.
When recording physical findings, which data are recorded first for all systems?
When recording physical findings, which data are recorded first for all systems: Inspection.
The definition of physical is things that are of nature or of the body. An example of physical is plantlife growing in the ground. An example of physical is someone confined to a wheelchair because of disabilities. physical indicates connected with, pertaining to, the animal or human body as a material organism.
Physical health is defined as the condition of your body, taking into consideration everything from the absence of disease to fitness level.
learn more about Physical here
https://brainly.com/question/13490156
#SPJ4
Question # 6
Multiple Choice
Which of the following explains why James, who operates an apple orchard that sells a very rare type of gourmet apple, would probably
choose NOT to participate in contract production?
O Because he independently grows a unique product, he is already locked in to the best price of the market.
He operates as a price-taker, that so there is no need to contract.
His rare commodity offers an increased cash flow and an expansion of operation.
As a seller of a rare commodity he is in a position to negotiate higher prices than commodity food producers.
The statement that explains why James, who operates an apple orchard that sells a very rare type of gourmet apple, would probably choose not to participate in contract production is because he independently grows a unique product, he is already locked in to the best price of the market (option A).
What is contract manufacturing?Contract manufacturing or production occurs when a small business hires another company to produce its products.
This enables small business individuals to begin selling their products without obtaining the large amount of capital necessary to build and run a factory.
However, according to this question, James is a business individual who operates an apple orchard that sells a very rare type of gourmet apple.
Therefore, James would not need to participate in contract production because he independently grows a unique product, he is already locked in to the best price of the market.
Learn more about contract production at: https://brainly.com/question/13373253
#SPJ1
mechanical equivalent of heat Do the data for the second part of the experiment support or refute the second hypothesis
When we state something about the results on the basis whether the observed data supports the original hypothesis, we say that we are concluding the results.
What is the relationship between force and acceleration based on Newton's 2nd law?
Newton's second law of motion can be formally stated as follows: The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
Learn more about Newton's second law of motion brainly.com/question/13447525
#SPJ4
What is the voltage drop across the 10.0 ohm resistor?
The voltage drop across the 10.0 Ω resistor is c)120V
What is voltage drop in a circuit?A voltage drop is an amount the voltage lowers when crossing a component from the negative side to the positive side in a series circuit. If you positioned a multimeter across a resistor, the voltage drop would be the quantity of voltage you are reading.
Voltage drop is the reduction of electrical potential along the way of a present flowing in an electrical circuit.since, all three resistors 10Ω, 20 Ω, and 30Ω are in series combination this indicates that the voltage drop across each resistor will be the same as the total voltage drop in the circuit because in parallel combination voltage stay identical in the circuit buy current gets divided in each branchhence, the voltage drop across the 10.0 Ω resistor = 120 V
correct answer c) 120 V
To learn more about the voltage , refer:
https://brainly.com/question/24858512
#SPJ9
Would the numerical values of the thermal coefficients would have been the same if the temperatures had been measured in Fahrenheit instead of Celsius
The numerical values of the thermal coefficients would change if the temperatures had been measured in Fahrenheit instead of Celsius.
Why would the numerical values of thermal coefficients change if the temperature is measured in Fahrenheit instead of Celsius?The amount it expands is, of course, a property of the material and cannot be altered. When we use alternative units of measurement, though, we communicate this differently. It will therefore be 9/5 of its value in "per degree C" if it is stated as "per degree F".For example:Saying the speed of light is 299792458 m/s, or 186282.397 miles per second, is equivalent. The representation alters but not the speed of light.What is the Coefficient of thermal expansion?The rate at which a material expands as temperature rises is known as the coefficient of thermal expansion (CTE). The material is assumed to still be in its solid or fluid form as this coefficient is calculated at constant pressure and without a phase transition.A material will expand more in response to heat if its coefficient of thermal expansion is higher.T o learn more about thermal coefficients visit:
https://brainly.com/question/15557568
#SPJ4
Find the location of the object at times 0,1,2,. 1,000. Save the x-coordinates of the object at each time in a 1 ×1001 row vector named a11. Save t
The x-coordinates of the object at each time in a 1 ×1001 row vector named a11 using coordinate.
Coordinates are distances or angles, represented by numbers, that uniquely perceive factors on surfaces of dimensions (second) or in space of 3 dimensions.
Coordinates are hard and fast values that help to expose the exact position of a factor within the coordinated aircraft. A coordinate aircraft is a 2nd plane that's shaped by the intersection of perpendicular traces known as the x-axis and y-axis.
clear all
close all
alpha=-0.003;
w=0.05;
A=[1-alpha,-w;w,1-alpha];
A_inv=inv(A);
x0=[1;-1];
ans1=[1];
ans2=[-1];
for i=1:1000
x0=A_inv*x0;
ans1(i+1)=x0(1);
ans2(i+1)=x0(2);
end
ans1
Learn more about coordinate here:-https://brainly.com/question/17206319
#SPJ4
A generator coil is rotated one quarter of a full revolution, from θ = 0° to θ = 90°,
in 13.2 ms. The coil has 353 loops, and it is a square 4.62 cm on a side. If the coil
is in a uniform magnetic field of 0.991 T, what is the maximum electromotive force
induced in the coil by the generator?
The maximum electromotive force induced in the coil by the generator is 56.45 V.
Maximum electromotive force induced in the coil
emf(max) = NAB/t
where;
N is number of turnsA is areaB is magnetic fieldt is timeSubstitute the given parameter and solve for maximum electromotive force induced in the coil.
Area of the loop = 0.0462 m x 0.0462 m = 0.00213 m²
emf(max) = (353 x 0.00213 x 0.991) / (13.2 x 10⁻³)
emf(max) = 56.45 V
Thus, the maximum electromotive force induced in the coil by the generator is 56.45 V.
Learn more about electromotive force here: https://brainly.com/question/24158806
#SPJ1
Which definition of a compression is correct?
Compression is the term for the reduction in volume that stress causes in any object or material. Living systems as well as solids, liquids, and gases may all endure compression. For example, the pressure of the atmosphere at sea level is the standard, or reference, for most land animals, but the standard for deep-sea fishes and similar specialized forms is the normal pressure of their environment. In the latter, compression is measured against the system's volume at the standard pressure to which an organism is subjected.
Cytosine is methylated resulting in 5-methylcytosine. What is the most likely outcome?.
Answer: Cytosine is methylated resulting in 5-methylcytosine. Then the gene expression will decrease.
Explanation: To find the answer, we need to know more about the methylation of cytosine.
What is methylation of cytosine?Methylation means the addition of a methyl group on a substrate of an atom.It's a form of alkylation, here a methyl group replaces a hydrogen atom.Methylation of cytosine occurs at CpG palindrome in DNA.When cytosine is methylated to produce 5- methyl cytosine, which results in a decrease in gene expression.Thus, we can conclude that, Cytosine is methylated resulting in 5-methylcytosine. Then the gene expression will decrease.
Learn more about the methylation of cytosine here:
https://brainly.com/question/28044895
#SPJ4
Russia shut off the nord stream pipeline that supplies which nation with natural gas?.
Russia shut off the Nord Stream pipeline that supplies natural gas to Germany.
What is the Nord Stream pipeline?
A pair of offshore natural gas pipeline systems in Europe called Nord Stream cross the Baltic Sea from Russia to Germany. It consists of the Nord Stream 1 and Nord Stream 2 pipelines, both of which originate in northwest Russia, near Finland, in Vyborg and Ust-Luga, respectively. Both pipelines travel to Lubmin in the Mecklenburg-Vorpommern state of northeastern Germany.
Due to Russia's invasion of Ukraine, certification for Nord Stream 2 has been rejected. When referring to a larger network of pipelines, such as the feeding onshore pipeline in Russia and additional connections in Western Europe, the term "Nord Stream" is sometimes used.
Nord Stream joins the NEL pipeline to Rehden near Bremen in northwestern Germany and the OPAL pipeline to Olbernhau in eastern Germany at the Czech border in Lubmin.
Thus, the Nord Stream pipeline supplies natural gas to Germany.
Learn more about the natural gas pipeline here,
https://brainly.com/question/4417882
#SPJ4