Valence electron of the first 20 elements​

(a) The magnitude of the force that the magnetic field exerts on the loop is 0.042 N.

(b) The direction of the force that the magnetic field exerts on the loop will be out of the plane.

F = BIL

where;

emf = BVb

where;

emf = 2.6 x 3 x 0.018 = 0.1404 V

Current in the loop, I = emf/R = 0.1404/0.8 = 0.18 A

F = BIL

where;

F = 2.6 x 0.18 x 0.09 = 0.042 N

The direction of the force that the magnetic field exerts on the loop will be out of the plane.

Learn more about magnetic force here: https://brainly.com/question/13277365

#SPJ1

Hi there!

Part A.

To solve this part, all we need to do is a summation of vertical forces.

We have the following acting on the beam :
- Force of gravity (Fg, down)
- Force of tension from the rope holding the box (T, down)
- Force exerted by pivot (Py, up)

These sum to zero because the beam is not accelerating vertically.

[tex]\Sigma F = -F_g - T + P_y = 0[/tex]

[tex]P_y = F_g + T[/tex]

The tension force is equal to the box's weight because the forces on the box are balanced. Let's use values and solve.

[tex]P_y = 49(9.8) + 49(9.8) = \boxed{960.4N}[/tex]

Part B.

We must begin by doing a summation of torques. Placing the pivot point at the pivot, we have the following present:
- Force of gravity acting at the center of mass of the rod (CC, at L/2)

- The tension of the horizontal cable acting at the end of the rod (CCW, at L)

- The force of tension in the rope holding the box (CC, at 3L/4)

Since the rod is not rotating, these torques sum to zero.

The equation for torque is:
[tex]\tau = r \times F[/tex]

This is a cross-product, and you must find the lever arm (perpendicular distance between pivot and line of action of force). We will need to use trigonometry for this.

Now, let's find the torque from all three of these forces.

- Force of gravity at center:

The perpendicular distance between the force of gravity and the pivot point is the cosine with respect to the angle made with the floor.

[tex]\tau = Mg\frac{L}{2}cos(\theta) = 49(9.8)*\frac{2.2}{2} cos(18) = 502.367 Nm[/tex]

- Tension of horizontal cable:

The lever arm is the sine with respect to the angle. We will still have to solve for the value of 'T'.

[tex]\tau = TLsin\theta = T(2.2)sin(18) = 0.68T[/tex]

- Tension of rope holding box:
The tension is equal to the weight of the box since the box isn't accelerating. Thus, the torque would be:
[tex]\tau = Mg(\frac{3L}{4}) = 49(9.8)*\frac{3(2.2)}{4}cos(18) = 753.55 Nm[/tex]

Summing with clockwise torques + and counterclockwise -:
[tex]\Sigma \tau = 502.367 + 753.55 - 0.68 T = 0 \\\\1255.917 = 0.68T\\T = \boxed{1847.38 N}[/tex]

Part C.

This part is a lot easier than it seems. All we need to do is a summation of horizontal forces.

We only have two:
- The horizontal tension in the cable to the left (1847.38 N)

- The horizontal force exerted by the pivot on the beam to the right

These two balance out because there is no acceleration of the beam horizontally, so:
[tex]\Sigma F = P_x - T = 0 \\\\P_x = T\\\\P_x = \boxed{1847.38 N}[/tex]

**to the right

Answer:

a) 960.4 N

b) T= 5/4 Mg CotanΘ

c) 1847. 38

Explanation:

a) Py= 2Mg

=2(49 x 9.8)

= 960.4

b) T= (Mg x 1/2 x cos Θ + Mg x 3/4 x cos Θ) / sin Θ

T= 5/4 X Mg cotanΘ

c) T= (5/4) x (49 x 9.8) cotan (18)

T= 1847.37954

= 1847.38

(a) The proton’s potential energy change is 3.6 x 10⁻¹⁸ J.

(b) The potential difference between the negative plate and a point midway between the plates is 11.25 V.

(c) The speed of the proton just before it hits the negative plate is 6.57 x 10⁴ m/s.

U = qΔV

where;

U = q(Ed)

U = (1.6 x 10⁻¹⁹)(1500 x 1.5 x 10⁻²)

U = 3.6 x 10⁻¹⁸ J

ΔV = E(0.5d)

ΔV = 0.5Ed

ΔV = 0.5 (1500)(1.5 x 10⁻²)

ΔV = 11.25 V

U = ¹/₂mv²

U = mv²

v² = 2U/m

where;

v² = (2 x 3.6 x 10⁻¹⁸) / ( 1.67 x 10⁻²⁷)

v² = 4.311 x 10⁹

v = √(4.311 x 10⁹)

v = 6.57 x 10⁴ m/s

Thus, the proton’s potential energy change is 3.6 x 10⁻¹⁸ J.

The potential difference between the negative plate and a point midway between the plates is 11.25 V.

The speed of the proton just before it hits the negative plate is 6.57 x 10⁴ m/s.

Learn more about potential difference here: https://brainly.com/question/24142403

#SPJ1

(1) The critical angles for the air is 90⁰,

(2) The critical angles for the polystyrene is 39.1 ⁰ and

(3) The critical angles for the flint glass is 37.2 ⁰.

θc = sin⁻¹( 1/η)

where;

Refractive index of air = 1

Refractive index of polystyrene = 1.5865

Refractive index of flint glass = 1.655

θc = sin⁻¹( 1/1)

θc = 90⁰

θc = sin⁻¹( 1/1.5865)

θc =  39.1 ⁰

θc = sin⁻¹( 1/1.655)

θc = 37.2 ⁰

Thus, the critical angles for the air is 90⁰, the critical angles for the polystyrene is 39.1 ⁰ and the critical angles for the flint glass is 37.2 ⁰.

Learn more about critical angles here: https://brainly.com/question/7282578

#SPJ1

Answer:

D. Impulse

Explanation: Hope this helps

Radiation from the sun hits earth unequally and is absorbed by different materials in varying amounts. This is called differential heating.

Differential heating is the property that causes different surfaces to heat up and cool down at different rates. The earth's surface receives different magnitudes of solar radiation and also the earth's surfaces absorb thermal energy in different magnitudes.

The color, shape, texture, surface and presence of constructions can influence the heating or cooling of the earth.

The earth in the equator line is heated more by solar action than that of the poles, since it receives more amount of radiation per unit area.

In general, dry surfaces heat up and cool down faster than wet ones.

Therefore, we can confirm that when radiation from the sun hits earth unequally and is absorbed by different materials in varying amounts is called differential heating.

To learn more about differential heating visit: https://brainly.com/question/28033741?referrer=searchResults

#SPJ1

The tension in the upper rope is 50.53 N.

The tension in the upper rope is calculated as follows;

T(up) = T(dn) + mg

where;

T(up) = 12.8 N + (3.85 x 9.8) N

T(up) = 50.53 N

Thus, the tension in the upper rope is 50.53 N.

Learn more about tension here: https://brainly.com/question/24994188

#SPJ1

The minimum diameter of the steel wire is 7.58 mm.

Young's modulus = stress/strain

strain = e/l = (7.32 x 10⁻³ m) / (19.3 m) = 3.79 x 10⁻⁴

stress = Young's modulus  x  strain

stress = 200 x 10⁹ N/m²   x 3.79 x 10⁻⁴  = 7.59 x 10⁷ N/m²

stress = Force/Area

Area = Force/stress

Area = mg/stress

Area = (350 x 9.8) / (7.59 x 10⁷)

Area = 4.519 x 10⁻⁵ m²

Area = πd²/₄

πd²/₄ = 4.519 x 10⁻⁵ m²

πd² = 4(4.519 x 10⁻⁵)

d² = (4 x 4.519 x 10⁻⁵)/π

d² = 5.75 x 10⁻⁵

d = √(5.75 x 10⁻⁵)

d = 7.58 x 10⁻³ m

d = 7.58 mm

Thus, the minimum diameter of the steel wire is 7.58 mm.

Learn more about diameter here: https://brainly.com/question/390660

#SPJ1

Maximum work done by the hammer on the is 10 J.

Force is added to the hammer in order to increase the power of the hammer; option B.

Work done is defined as the product of force and the distance travelled by force.

Energy is used to do work.

The potential energy of the hammer is converted to work done.

The maximum amount of work it could do on the nail is given below:

Maximum work = 1.5 * 9.81 * 0.7

Maximum work = 10 J

Force is added to the hammer in order to increase the power of the hammer.

In conclusion, the work done by the hammer is obtained from the potential energy of the hammer.

Learn more about potential energy at: https://brainly.com/question/14427111

#SPJ1

The total current through the battery is 4.77 A.

The current through resistor R1 is 2.4 A.

The current through resistor R2 is 1.2 A

The current through resistor R3 is 0.8 A

The current through resistor R4 is 0.36 A.

The total resistance of the circuit is calculated as follows;

1/Rt = 1/R₁ + 1/R₂ + 1/R₃ + 1/R₄

1/Rt = 1/5 + 1/10 + 1/15 + 1/33

1/Rt = 0.397

Rt = 1/0.397

Rt = 2.518 ohms

I = V/Rt

I = 12/2.518

I = 4.77 A

I₁ = V/R₁

I₁ = 12/5

I₁ = 2.4 A

I₂ = 12/10

I₂ = 1.2 A

I₃ = 12/15

I₃ = 0.8 A

I₄ = 12/33

I₄ = 0.36 A

Thus, the total current through the battery is 4.77 A.

The current through resistor R1 is 2.4 A.

The current through resistor R2 is 1.2 A

The current through resistor R3 is 0.8 A

The current through resistor R4 is 0.36 A.

Learn more about current here: https://brainly.com/question/25537936

#SPJ1

The solution for the three questions  is mathematically given as

Parts A and C are both zeros.

Part B B = 0.001855Tesla

Parts A and C are both zeros.

For component A, the magnetic field is zero since 12.6 cm is still inside the toroidal solenoid. Part C has no magnetic field since it is 20.7 cm outside of the toroidal solenoid.

Generally, the equation for  magnetic field is  mathematically given as

B = (mu_0*N*I)/(2*pi*r)

Therefore

B = ((4*pi*10^{-7})*180*8.40)/(2*pi*0.163)

B = 0.001855Tesla

In conclusion, the magnitude of the magnetic field at 16.3 cm from the center of the torus is

B = 0.001855Tesla

Read more about the magnetic field

https://brainly.com/question/23096032

#SPJ1

Answer:

Part A & C: 0 T

Part B: 1.855*10^-3 T

Explanation:

The formula that models the magnetic field of a toroid is B=μ0*N*I/2π*r .

Note: Toroids keep their magnetic field rotating within the coils that carry current.

Part A & C: Thus the B field magnitude 12.6 cm & 20.7 cm away from the center is 0 T.

Part B: [tex]B=\frac{(4\pi *10x^{-7} )(180)(8.4 A)}{(2\pi )(16.3*10x^{-2} m)}[/tex]

B=1.855*10^-3 T

Answer:

Explanation:

The angular speed of the rotor is 200 rad/s.

The torque needed to be transmitted by the engine is 180 Nm.

The power of the rotor required to transmit energy to apply a torque τ to rotate a motor with angular speed ω,

P=τω

=180×200W

=36kW

The approximate uncertainty in the area of a circle is 5.4%.

A = πr²

where;

A = π(4.3 x 10⁴)²

A = 5.81 x 10⁹ cm²

Let the error in measurement = 1 x 10⁴ cm

A =  π(1 x 10⁴)² = 3.14 x 10⁸ cm²

% = (error/actual area) x 100%

% = ( 3.14 x 10⁸) / (5.81 x 10⁹) x 100%

% = 5.4 %

Thus, the approximate uncertainty in the area of a circle is 5.4%.

Learn more about uncertainty here: https://brainly.com/question/1970053

#SPJ1

(A) The spring constant of the spring is 4.94 N.

(B) The speed of the cart after pushing it is 0.47 m/s.

(C) The force applied to the cart is 0.75 N.

ω = √k/m

where;

0.5 rev/s = 0.5(2π) rad/s = π rad/s = 3.142 rad/s

ω² = k/m

k = mω²

k = 0.5 x (3.142)²

k = 4.94 N/m

E = ¹/₂kA²

where;

A is amplitude

E = ¹/₂(4.94)(0.15)²

E = 0.056 J

E = ¹/₂mv²

2E = mv²

v² = 2E/m

v² = (2 x 0.056)/(0.5)

v² = 0.224

v = √0.224

v = 0.47 m/s

E = ¹/₂FA

2E = FA

F = 2E/A

F = (2 x 0.056)/(0.15)

F = 0.75 N

Thus, the spring constant of the spring is 4.94 N. The speed of the cart after pushing it is 0.47 m/s. The force applied to the cart is 0.75 N.

Learn more about spring constant here: https://brainly.com/question/1968517

#SPJ1

The magnitude of the tension in the string marked A is 39.5 N.

The tension in A is determined thus:

The angle at A, θ = tan⁻¹(3/8) = 20.56

When extrapolated below negative x, the angle at B, α = tan⁻¹(5/4) = 51.34

When extrapolated below negative x, the angle at C, β = tan⁻¹(1/6) = 9.46

Taking the horizontal components of tension;

56.3cos(9.46) = A * cos(20.56) + B * cos(51.34)

0.6247B= 55.53 - 0.936A

B = (55.53 - 0.936A)/0.6247 ----(1)

Taking the vertical components of tension;

56.3 * sin(9.46) + A * sin(20.6) = B * sin(51.3)

9.25 + 0.35A = 0.78B  ---- (2)

substitute the value (1)  in (2)

9.25 + 0.35A = 0.78{(55.53 - 0.936A)/0.6247}

(9.25 + 0.35A) * 0.6247 = 43.31 - 0.73A

0.22A + 0.73A = 43.31 - 5.78

0.93A = 37.53

A = 39.5 N

In conclusion, the tension in A is determined by solving for the vertical and horizontal components of tension.

Learn more about tension force at: https://brainly.com/question/24994188

#SPJ1

Answer:

Average density of the crown: approximately [tex]8\; {\rm g \cdot mL^{-1}}[/tex].

Hence, if this crown contains no empty space, this crown is not made of pure gold.

Explanation:

Let [tex]m(\text{crown})[/tex] and [tex]V(\text{crown})[/tex] denote the mass and volume of this crown. Let [tex]g[/tex] denote the gravitational field strength.

Since this crown is fully immersed in water, the volume of water displaced [tex]V(\text{water, displaced})[/tex] is equal to the volume of this crown:

[tex]V(\text{water, displaced}) = V(\text{crown})[/tex].

The mass of water displaced would be:

[tex]\begin{aligned}m(\text{water, displaced}) &= \rho(\text{water}) \, V(\text{water, displaced}) \\ &= \rho(\text{water}) \, V(\text{crown})\end{aligned}[/tex].

The weight of water displaced would be [tex]m(\text{water, displaced})\, g = \rho(\text{water}) \, V(\text{crown})\, g\end{aligned}[/tex].

The buoyancy force on this crown is equal to the weight of water that this crown displaced:

[tex]F(\text{buoyancy}) = \rho(\text{water}) \, V(\text{crown})\, g[/tex].

The magnitude of this buoyancy force is [tex]7.84\; {\rm N} - 6.86\; {\rm N} = 0.98\; {\rm N}[/tex]. Rearrange the equation for buoyancy to find [tex]V(\text{crown})[/tex]:

[tex]\begin{aligned} V(\text{crown}) &= \frac{F(\text{buoyancy}) }{\rho(\text{water}) \, g}\end{aligned}[/tex].

Since the weight of this crown is [tex]\text{weight}(\text{crown}) = m(\text{crown})\, g[/tex], the mass of this crown would be [tex]m(\text{crown})= \text{weight}(\text{crown}) / g[/tex].

The average density of this crown would be:

[tex]\begin{aligned}\rho(\text{crown}) &= \frac{m(\text{crown})}{V(\text{crown})} \\ &= \frac{\text{weight}(\text{crown}) / g}{F(\text{buoyancy}) / (\rho(\text{water})\, g)} \\ &= \frac{\text{weight}(\text{crown})}{F(\text{buoyancy})}\, \rho(\text{water}) \\ &= \frac{7.84\; {\rm N}}{0.98\; {\rm N}}\times 1.000 \; {\rm g\cdot mL^{-1}} \\ &= 8.0\; {\rm g \cdot mL^{-1}}\end{aligned}[/tex].

The density of pure gold is significantly higher than [tex]8.0\; {\rm g\cdot mL^{-1}}[/tex]. Hence, if this crown contains no empty space (i.e., no air bubble within the crown), the crown would not be made of pure gold.

Answer:

See below

Explanation:

I will assume the force is in a DOWNWARD direction ( I believe it makes no answer difference)

Horizontal component is then 100 cos 36° =80.9 N

F = ma

80.9 = 25 kg  *a

a = 3.24 m/s^2

Answer:

See image

Explanation:

Plato

The orbiting speed of the satellite orbiting around the planet Glob is 60.8m/s.

To find the answer, we need to know about the orbital velocity a satellite.

= 60.8m/s

Thus, we can conclude that the speed of the satellite orbiting the planet Glob is 60.8m/s.

Learn more about the orbital velocity here:

brainly.com/question/22247460

#SPJ1

The angle of the red light is mathematically given as

[tex]\theta = 7.24 \textdegree[/tex]

Generally, the equation for the grating element is  mathematically given as

d= 1 / N

Therefore

d= 1/1965

d= 5.089 * 10^{-6} m

Generally, the equation for the  differential formula is  mathematically given as

[tex]d sin \theta = m\lambda[/tex]

Therefore

[tex]sin \theta = \lambda / d[/tex]

[tex]sin \theta= (640 * 10 ^ {-9} m)/(5.089 * 10 ^ {-6} m)[/tex]

[tex]\theta = 7.24 \textdegree[/tex]

In conclusion, The angle of the red light

[tex]\theta = 7.24 \textdegree[/tex]

Read more about an angle

https://brainly.com/question/13954458

#SPJ1

Since upward forces must be equal to the downward forces, the tension in the cable is 225.3 N

The two conditions are;

The given parameters are;

Tsinθ = mg

Tsin 66 = 21 x 9.8

T = 205.8 / 0.914

T = 225.3 N

Therefore, the tension in the cable is 225.3 N

Learn more about Tension here: https://brainly.com/question/1264511

#SPJ1

Change in potential energy = 1.02 * 10⁶ J

Minimum work required of the hiker = 1.89 * 10⁶ J

The potential energy of a body is calculated as follows:

Change in potential energy = Final PE - Initial PE

Change in potential energy = mg(H - h)

Change in potential energy = 72.5 * 9.81 * (2660 - 1230)

Change in potential energy = 1.02 * 10⁶ J

The minimum work required of the hiker is the potential energy at the highest point.

Minimum work = mgH

Minimum work required of the hiker = 1.89 * 10⁶ J

In conclusion, potential energy is energy due to state or position of a body.

Learn more about potential energy at: https://brainly.com/question/14427111
#SPJ1

Hi there!

We can use Biot-Savart's Law for a moving particle:
[tex]B= \frac{\mu_0 }{4\pi}\frac{q\vec{v}\times \vec{r}}{r^2 }[/tex]

B = Magnetic field strength (T)
v = velocity of electron (0.130c = 3.9 × 10⁷ m/s)

q = charge of particle (1.6 × 10⁻¹⁹ C)

μ₀ = Permeability of free space (4π × 10⁻⁷ Tm/A)

r = distance from particle (2.10 μm)

There is a cross product between the velocity vector and the radius vector (not a quantity, but specifies a direction). We can write this as:

[tex]B= \frac{\mu_0 }{4\pi}\frac{q\vec{v} \vec{r}sin\theta}{r^2 }[/tex]

Where 'θ' is the angle between the velocity and radius vectors.

a)
To find the angle between the velocity and radius vector, we find the complementary angle:

θ = 90° - 60° = 30°

Plugging 'θ' into the equation along with our other values:

[tex]B= \frac{\mu_0 }{4\pi}\frac{q\vec{v} \vec{r}sin\theta}{r^2 }\\\\B= \frac{(4\pi *10^{-7})}{4\pi}\frac{(1.6*10^{-19})(3.9*10^{7}) \vec{r}sin(30)}{(2.1*10^{-5})^2 }[/tex]

[tex]B = \boxed{7.07 *10^{-10} T}[/tex]

b)
Repeat the same process. The angle between the velocity and radius vector is 150°, and its sine value is the same as that of sin(30°). So, the particle's produced field will be the same as that of part A.

c)

In this instance, the radius vector and the velocity vector are perpendicular so

'θ' = 90°.

[tex]B= \frac{(4\pi *10^{-7})}{4\pi}\frac{(1.6*10^{-19})(3.9*10^{7}) \vec{r}sin(90)}{(2.1*10^{-5})^2 } = \boxed{1.415 * 10^{-9}T}[/tex]

d)
This point is ALONG the velocity vector, so there is no magnetic field produced at this point.

Aka, the radius and velocity vectors are parallel, and since sin(0) = 0, there is no magnetic field at this point.

[tex]\boxed{B = 0 T}[/tex]

(a) The maximum height reached by Jane is 1.8 m.

(b) The length of the vine will affect the time of her motion, which will impact on speed and maximum height attained.

apply the principle of conservation of energy;

P.E = K.E

mgh = ¹/₂mv²

h = v²/2g

where;

h = (6²)/(2 x 9.8)

h = 1.84 m

Assuming Jane to be in simple harmonic motion, the time of motion is calculated as;

T =  2π√(L/g)

where;

Thus, the length of the vine will affect the time of her motion, which will impact on speed and maximum height attained.

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

The wavelength of A2 with frequency (110hz) is 3.01 m.

Wavelength of a sound wave is the distance between successive similar points in the wave such as rarefactions or compressions.

A tuba is a musical instrument that produces sound waves.

Wavelength is related to frequency and velocity by the formula below:

The wavelength of A2 with frequency (110hz) is 3.01 m.

In conclusion, the wavelength of a wave is inversely proportional to frequency.

Learn more about wavelength at: https://brainly.com/question/9807579

#SPJ1

The thermal energy that is generated due to friction is 344J.

Now we know that the total mechanical energy in the system is constant. The loss in energy is given by the loss in energy.

Thus, the kinetic energy is given as;

KE = 0.5 * mv^2 =0.5 * 15.0-kg * (1.10 m/s)^2 = 9.1 J

PE = mgh = 15.0-kg * 9.8 m/s^2 *  2.40 m = 352.8 J

The thermal energy is; 352.8 J - 9.1 J = 344J

Learn more about thermal energy due to friction:https://brainly.com/question/7207509

#SPJ1

Explanation:

gravitational potential energy = mgh (must be in S.I. unit)

m= 0.4 kg ; g= 10m/s (gravitational acceleration occurs); h=9.2 m

hence mgh=0.4×10×9.2= 36.8J

unit for energy is joules and since the variables are in S.I. unit, we can use Joules as the final unit for measurement

Answer:

36.06 J if you define g = 9.8 m/s² or 36.8 J if you define g = 10 m/s²

Explanation:

Potential Energy = Mass x Gravitational Acceleration x Height

It can be expressed as [tex]\displaystyle{PE = mgh}[/tex] where PE is potential energy, m is mass, g is gravitational acceleration and h is height.

In this case, we know mass is 0.40 kg and height of 9.2 m as well as gravitational acceleration is defined to be 9.8 m/s² (You can also define g = 10 m/s²)

Therefore, substitute given information in formula:

[tex]\displaystyle{PE=0.40 \ \times \ 9.8 \ \times 9.2 }\\\\\displaystyle{PE=36.06 \ J}[/tex]

With g = 10 m/s², you'll get:

[tex]\displaystyle{PE = 0.40 \ \times 10 \ \times 9.2}\\\\\displaystyle{PE = 36.8 \ J}[/tex]

Note that J is for joule unit.

Therefore, the answer is 36.06 J if you define g = 9.8 m/s² or 36.8 J if you define g = 10 m/s² - both work.

(1) The speed of light through vacuum is 3 x 10⁸ m/s.

(2) The speed of light in air at 30⁰C is 350 m/s.

(3) The speed of light in air at 0⁰C is 330 m/s.

(4) The transparent substance is glass.

(5) The color of light observed is red.

(6) The energy of a photon of red light is 2.85 x 10⁻¹⁹ J.

The speed of light through vacuum is 3 x 10⁸ m/s.

The speed of light in air at 30⁰C is 350 m/s.

The speed of light in air at 0⁰C is 330 m/s

n = speed of light in vacuum/speed of light in the substance

n = ( 3 x 10⁸ m/s) / ( 2 x 10⁸ m/s)

n = 1.5

The refractive index of glass is 1.5, thus, the transparent substance is glass.

f = v/λ

f = (3 x 10⁸) / (6.8 x 10⁻⁷)

f = 4.41 x 10¹⁴ Hz

The color of light observed is red based on the frequency and wavelength.

E = hf

E = (6.626 x 10⁻³⁴)(4.3 x 10¹⁴)

E = 2.85 x 10⁻¹⁹ J

Thus, the speed of light through vacuum is 3 x 10⁸ m/s.

The speed of light in air at 30⁰C is 350 m/s.

The speed of light in air at 0⁰C is 330 m/s.

The transparent substance is glass.

The color of light observed is red.

The energy of a photon of red light is 2.85 x 10⁻¹⁹ J.

Learn more about speed of light here: https://brainly.com/question/104425

#SPJ1

The correct option is D.   The initial momentum of the blue and green train combined during the collision is 200 kgm/s.

Apply the principle of conservation of linear momentum as follows;

Pi = m1v1 + m2v2

where;

Pi = (50 x 4) + 30(0)

Pi = 200 kgm/s

Thus, the initial momentum of the blue and green train combined is 200 kgm/s.

Learn more about momentum here: https://brainly.com/question/7538238

#SPJ1