What are the drawbacks of using solar and wind energy?

Dropping a ball of dough onto a kitchen counter, its energy store of potential energy is converted into kinetic energy as it falls. Upon impact, the kinetic energy is converted into potential, thermal, and sound energy.

When a ball of dough is dropped onto a kitchen counter, there is a change in the energy store of the dough. Initially, the dough has potential energy due to its position above the counter. As the dough is dropped, this potential energy is converted into kinetic energy, or energy of motion. As the dough falls, it gains speed and thus increases in kinetic energy.

When the dough strikes the counter, the kinetic energy is converted into a combination of potential energy and thermal energy. The dough compresses and deforms upon impact, increasing its potential energy. The compression and deformation also generates heat, which increases the thermal energy of the dough. A portion of the kinetic energy is also converted into sound energy as the dough makes contact with the counter.

To learn more about potential energy visit: https://brainly.com/question/13997830

#SPJ4

Answer:

A-B: positive

B-C: zero

C-D: negative

Explanation:

In a velocity-time graph, acceleration is shown by the slope or steepness of the graph. A positive acceleration means that the line of the slope is upward, while a negative acceleration means that the line of the slope is downwards.

A horizontal line shows that the acceleration is 0, which means that the object is stationary.

If you disregard air resistance and assume that the object is falling freely, it will take 7.82 seconds for the container to descend 300 meters to the earth.

Free fall is any motion of an item in which gravity has been the only force applied on it.

The thing that was dropped from the plane is falling freely.

The only force operating on the container, which accelerates it by a consistent amount regardless of air resistance, is gravity.

The formula for calculating the amount of time it will take an item to reach the floor when it is in free fall is as follows:

s = ut + ¹/₂gt²

where

h is the height above the ground = 300 m

Since the container starts at rest, its initial vertical velocity, u, is equal to zero.

g is the acceleration of gravity = 9.8 m/s²

t is the time = ?

The equation above becomes;

h = ¹/₂gt² since u is zero

Solving the equation for t:

t = √2h/g

t = √2 * 300 / 9.8

t = 7.82 seconds.

Learn more about free fall visit::

https://brainly.com/question/12167131

#SPJ4

The Complete question is:

A 415-kg container of food and water is dropped from an airplane at an altitude of 300m. First, consider the situation ignoring air resistance. Then calculate the more realistic situation involving a drag force provided by a parachute.

1. If you ignore air resistance, how long will it take the container to fall 300m to the ground?

When sound waves are traveling in a medium, the energy is transferring all around.

Option D is the correct answer

Sound is the movement of energy through a substance – like air or water and it is caused by vibrations.

Sound wave is an example of a mechanical wave because it requires material medium for its propagation.

A wave is a vibration or disturbance that travels from one point to another and carries energy.

The movement of this sound wave, when it transfers energy from one point of medium to another is known as sound wave propagation.

Thus, we can conclude that during the propagation of sound waves, energy is transferred to the entire medium.

Learn more about sound waves here: https://brainly.com/question/1199084

#SPJ1

1. Convert the mass of \pu{67.5 mg}67.5 mg67, point, 5, space, m, g to grams: 67.5 mg = 0.0675 g

2. Calculate the molar mass of \ce{sr}srs, r:Molar mass of \ce{sr}srs, r = 87.62 g/mol

Molar mass is a measure of the amount of mass contained in one mole of a given substance. It is expressed in grams per mole (g/mol) and is numerically equal to the atomic or molecular weight of the substance. The molar mass of a substance is calculated by adding together the atomic masses.

3. Calculate the number of moles:

n = m/M = 0.0675 g/87.62 g/mol = 0.0007704 mol

4. Calculate the number of atoms:

Number of atoms = n x Avogadro's number

= 0.0007704 x 6.022 x 10^23

= 4.24 x 10^20 atoms

To learn more about molar mass
https://brainly.com/question/21257385
#SPJ4

The amount of force that is needed to accelerate the airplane is 40,992 N.

option B is the correct answer.

The amount of force that is needed to accelerate the airplane is calculated by applying Newton's second law of motion as follows;

Mathematically, the formula for Newton's second law of motion is given as;

F = ma

where;

The amount of force that is needed to accelerate the airplane is calculated as follows;

F = ( 9,760 kg )  x ( 4.2 m/s² )

F = 40,992 N

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

A student performs an experiment to determine the volume of hydrogen gas produced when a given mass.

To determine the volume of hydrogen gas produced in a chemical reaction, the student likely performed a series of steps. Here is an example procedure that the student may have followed

Hence, by following this procedure, the student should be able to determine the volume of hydrogen gas produced when a given mass of reactant is used. This information can then be used to calculate the stoichiometry of the reaction, determine reaction rate, or make other useful observations about the chemical system under study.

To know more about experiment here

https://brainly.com/question/13981167

#SPJ1

In 4.16 seconds, 60 km/h speed can be achieved if the initial speed is 30 km/h and the acceleration is 2.0 m/s².

Initial speed, u = 30 km/h

Final speed, v = 60 km/h  

Constant acceleration, a = 2.0 m/s²

Converting the initial speed in m/sec = 30 × 5/18

u = 75/9 m/s

Converting the final speed in m/sec = 60 × 5/18

v = 150/9 m/s

By the first equation of motion, which is used to determine the final velocity of an object which has some constant acceleration.

v = u + at

t = (v-u)/a

t = [(150/9) - (75/9)]/2

t = 4.16 sec.

To know more about speed, here

https://brainly.com/question/28224010

#SPJ4

Answer: 33,992 J (Joules)

Explanation:

The kinetic energy of an object is the energy it possesses due to its motion. The formula for kinetic energy is: Kinetic energy = 1/2 x mass x velocity^2

So, for a 233 kg car traveling at 12 m/s, the kinetic energy can be calculated as:

Kinetic energy = 1/2 x 233 kg x (12 m/s)^2

= 1/2 x 233 kg x 144 m^2/s^2

= 33,992 J (Joules)

It is important to note that the unit of energy is Joules (J).

In this case, the car has 33,992 Joules of kinetic energy. This energy represents the ability of the car to do work, such as causing damage if it collides with an object, or to overcome a force such as friction or air resistance. Kinetic energy increases with the mass of the object and the square of its velocity.

The thing which would happen if the weight of people increased on a roller coaster is that it will make it harder for it to slow down.

This is referred to as the force acting on the object due to gravity and it is denoted as W= mg where m is mass and g is acceleration due to gravity.

We should note that the larger the mass, the larger the momentum, and the more force you need to change it. Weight however does not make a roller coaster go faster but it does make it harder to slow down which is therefore the reason why it was chosen as the correct choice.

Read more about Weight here https://brainly.com/question/2337612

#SPJ1

1.4N

https://brainly.ph/question/4571058#

W = Fd

7J = F * 5m

The force exerted by the cat on the toy mouse is 1.4N

The amount of work done is 7J

The displacement experienced by the object is 5m

We know that work done (W) = Force (F) × Displacement (D)

W= F×D

7= F×5

Therefore, F=7/5

F= 1.4N

Therefore, the force exerted on the object is 1.4N

Learn more about force at:

https://brainly.com/question/13191643?referrer=searchResults

https://brainly.com/question/17083081?referrer=searchResults

B. tree rings. We can piece together the history of Earth's former climates thanks to Greenland & Antarctica, sediments from lakes and seas, and many more natural proxies records of climatic changes.

The temperature of the Earth has been clearly rising over the past several decades, according to ongoing thermometer temperature records.

Indirect examples of evidence include physical evidence such as bloodstains and other kinds of physical proof.Similar to forensic & scientific evidence, fingerprint evidence is also indirect.

To know more about local climates visit:

https://brainly.com/question/30143080

#SPJ1

tree rings. We can piece together the history of Earth's former climates thanks to Greenland & Antarctica, sediments from lakes and seas, and many more natural proxies records of climatic changes.

The temperature of the Earth has been clearly rising over the past several decades, according to ongoing thermometer temperature records.

Indirect examples of evidence include physical evidence such as bloodstains and other kinds of physical proof.Similar to forensic & scientific evidence, fingerprint evidence is also indirect.

To know more about local climates visit:

brainly.com/question/30143080

#SPJ1

Answer: A viscous fluid is thicker and more difficult to pour than a typical liquid, while a liquid is a substance that has a definite volume but no fixed shape and can flow to conform to the shape of its container. ✅

PLEASEEEE GIVE BRANLIEST

The momentum of a child and wagon if the total mass of the child and wagon given is 22 kg and the velocity is 1. 5 m/s is 33 kg⋅m/s.

Given:

Mass collectively=22 kg

velocity= 1. 5 m/s

To find momentum we use the formula for momentum which is;

p=mv

Putting the values we get

p= 22*1.5

p=33 kg⋅m/s

Hence, The momentum of a child and wagon when the total given mass of the child and wagon is 22 kg and the velocity is 1. 5 m/s is 33 kg⋅m/s.

To know more about momentum do visit

https://brainly.com/question/24030570

#SPJ4

The statements about the independent variable that are correct are:

The correct option are A, C, and E.

A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.

The dependent variable is the variable that is being measured in an experiment

Learn more about independent and dependent variables at: https://brainly.com/question/82796

#SPJ1

1. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values, we get d = -1/2 (-10 m/s) (3 s)^2 + 0 m/s (3 s) + 0 m = -45 m.

2. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). Plugging in the values and setting v = 25 m/s, we get 25 m/s = (-10 m/s)t + 0 m/s. Solving for t, we get t = 2.5 s.

3. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values and setting d = -320 m, we get -320 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 8 s.

4. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). To find the speed after falling 80 m, we need to find the time t that corresponds to this displacement. We can use the formula for displacement to find t: d = -1/2 gt^2 + vt + d0. Plugging in the values and setting d = -80 m, we get -80 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 2 s. Plugging this value of t back into the formula for speed, we get v = (-10 m/s) (2 s) + 0 m/s = -20 m/s.

5. The acceleration of an object is given by the formula a = (vf - vi)/t, where vf is the final velocity, vi is the initial velocity, and t is the time elapsed. In this case, the initial velocity is -20 m/s and the time elapsed is 1 s. The final velocity is not given, so we cannot use this formula to find the acceleration.

6. The displacement of an object with constant acceleration is given by the formula d = 1/2 at^2 + vt + d0, where a is the acceleration, v is the initial velocity, t is the time elapsed, and d0 is the initial displacement. In this case, the acceleration is -10 m/s^2, the initial velocity is -20 m/s, the time elapsed is 4 s.

What is speed?

Speed is a measure of how fast an object is moving. It is defined as the distance an object travels per unit of time. In equation form, speed is represented by the letter v and is equal to the distance d traveled divided by the time elapsed t: v = d/t. The unit of speed is typically meters per second (m/s) or kilometers per hour (km/h). For example, if a car travels a distance of 200 meters in 10 seconds, its speed is v = 200 m / 10 s = 20 m/s.

Therefore, the correct answer is as given above

learn more about speed: brainly.com/question/13943409

#SPJ1

So the car rolls a distance of 2.25 meters in 1.5 seconds.

To find the distance the car rolls in 1.5 seconds, we need to use the equation:

Distance = Initial velocity x Time + (1/2) x Acceleration x (Time^2)

Since the initial velocity of the car is 0 (it's rolling down the hill and not moving initially), we can simplify the equation to:

Distance = (1/2) x Acceleration x (Time^2)

Plugging in the values we have:

Distance = (1/2) x 2m/s^2 x (1.5s)^2

Distance = (1/2) x 2 x 1.5^2

Distance = (1/2) x 2 x 2.25

Distance = 2.25m

So the car rolls a distance of 2.25 meters in 1.5 seconds.

Learn more about mechanics and motion here: https://brainly.com/question/29803154

#SPJ4

Answer:

Tension is the pulling force transmitted axially by the means of a string, a rope, chain, or similar object, or by each end of a rod, truss member, or similar three-dimensional object; tension might also be described as the action-reaction pair of forces acting at each end of said elements

Answer:

cockroach

Explanation:

Because cockroach have only six legs and the surface area would be 6x (where x is size of foot) but in case of a spider who have 8 legs the area would be 8x since, 8x>6x the cockroach will leave deeper footprints

The orbital speed of the electron using the equation is 5.41 x 10^7 m/s.

Orbital speed is the speed of an object in orbit around a larger body, such as a planet or star. The speed of an object in orbit is determined by two factors: the mass of the central body and the distance of the object from the central body. If a body is more massive, the object in orbit must move faster to maintain its orbit. Similarly, if an object is closer to the central body, it must move faster to remain in orbit. Orbital speed is usually measured in kilometers per second (km/s). The orbital speed of Earth’s Moon, for example, is 1.022 km/s. Orbital speed is an important factor in space exploration, as spacecraft must achieve certain speeds to reach distant destinations.

The orbital speed of the electron can be calculated using the equation:
V = (2πr)/T
where r is the radius of the orbit, and T is the orbital period.
Assuming the orbital period is 2.2 x 10^-17 s, the orbital speed of the electron is:
V = (2π x 0.053 x 10^-9 m)/(2.2 x 10^-17 s) = 5.41 x 10^7 m/s

To learn more about orbital speed
https://brainly.com/question/22247460
#SPJ4

The averages of stacks one and two differ, there isn't a direct relationship between the number of cups and the stack's height.

The average is calculated by taking the total number of values in a given set and dividing it by the sum of all the values. The average of a group of values in a sample of data is what is referred to as a mean. The arithmetic mean is another name for an average, in other words. The term "mean" describes the average.

Given in the question,

total number of stacks = 2

Stack 1 has 6 cups of height, h1 = 15cm

Stack 2 has 12 cups of height h2 = 23cm

calculating the average: h1 - h2/ n1 - n2

= 15-23/6-12

= - 8/-6

=4/3

With an average of 4/3, to obtain the number of cups needed to obtain a height of 50m, we have:

50 / (4/3) = 50 × 3/4

= 150/4

= 37.5

Because the averages of stacks one and two differ, there isn't a direct relationship between the number of cups and the stack's height.

To know more about arithmetic mean visit

brainly.com/question/8622653

#SPJ4

There are 12.046×10²³ molecules in one mole of O₂ gas.

Each molecule of oxygen has 2 atoms. Avogadro explained that at constant pressure and volume there are certain number of molecules in one mole of gas, irrespective of the type of gas. The number of molecules in 22.4 L of any gas is 6.023 × 10²³. This constant is known as avogadro constant. This is one of the most important constant in the chemistry. If the atomic weight of a gas is 35. It means 35 is the weight of the one mole of gas or of 6.023 × 10²³ molecules of that gas. Atomic weight of any gas is the weight of a fixed number of molecules, which is determined by the avogadro's number. So the number of molecules in one mole of O₂ gas = 2 × 6.023 × 10²³

= 12.046×10²³

To know more about one mole, here

https://brainly.com/question/14585733

#SPJ4

The thing that scientists use to divide the geologic time scale is option C: Major divisions in the fossil records

Fossils are the remains or traces of ancient organisms that have been preserved in rock layers. Scientists study fossils to learn about the history of life on Earth, and the different types of fossils found in different rock layers can provide information about the different time periods in which those organisms lived.

Other methods, such as major changes in mineral deposits in the rock layers, evidence for catastrophic events in Earth's history, and major divisions in the sedimentary rock layers, can also provide information about different time periods, but the use of fossils is the main method for dividing the geologic time scale.

Learn more about fossil records  from

https://brainly.com/question/27346773

#SPJ1

The kinetic energy of toy car is 18J. When it's velocity doubled, K.E is 72J and it's velocity tripled, then K.E is 162J.

A moving object's kinetic energy is inversely proportional to its mass and to the square of its velocity. Similarly, an objects with equivalent mass and speed will have double the kinetic energy as one with double the mass and speed will have four times the kinetic energy.

Kinetic energy(K.E) = 1/2 mv^2

Mass of toy = 4Kg

V= 3m/s

K.E => 1/2 x 4 x 3^2

=> 18J

If velocity doubled, which means the new velocity = 6m/s

   K.E => 1/2 x 4 x 6^2

           => 72J

If velocity tripled, which means the new velocity = 9m/s

         K.E => 1/2 x 4 x 9^2

               => 162J

Learn more about velocity here:

brainly.com/question/19309255

#SPJ1

It strikes the wall normally with a velocity of v₁ = 30 m/s and rebounds with a velocity of v₂ = -20 m/s. We know that impulse is equal to the change in momentum. So, So, the impulse of the force exerted by the wall on the ball is 5 kg m/s.

a)x²+x+1=0

x=b±√b²-4ac/2a

x=-1±√-3/2=-1±√3i/2

b) z=-1/2+i√3/2

x=-1/2 y=√3/2 lies  

r=√x²+y²=√1/4+3/4-1

sin∅=√3/2 cos∅=-1/2

tan∅=√-3

since Z lies in Q  2nd arg(Z)=π-∅

∅=π-π/3=2π/3

Z=r(cos∅+isin∅)

=1(cos 2π/3+isin2π/3)

To learn more about Momentum refers to:

https://brainly.com/question/1042017

#SPJ1

The first ionization energy in group 15 elements in increasing atomic number decreases.

Ionization energy is the amount of energy requires to detach one electron from the atom. In the periodic table the ionization energy decreases as one goes down.

Therefore ionization energy is the quantity of energy that an isolated, gaseous atom in the ground electronic state must absorb to discharge an electron resulting in a cation. This energy is usually expressed in kJ/mol or the amount of energy it takes for all the atoms in a mole to lose one electron each.

Learn more about ionization energy here : brainly.com/question/20658080

#SPJ1

After 9 years, the account balance would be $528.28. The result is obtained by adding the amount of interest to the initial deposit.

The simple interest of an amount of money can be counted by the following formula.

I = P × r × t

I = A - P

Where

A savings account has the initial deposit of $425.00. It earns 2.7% simple interest per year. Find the final account balance after 9 years!

The amount of interest itself is

I = P × r × t

I = $425.00 × 2.7% per year × 9 years

I = $425.00 × 0.027 × 9

I = $103.28

The account balance after 9 years would be

I = A - P

$103.28 = A - $425.00

A = $425.00 + $103.28

A = $528.28

Hence, the final account balance after 9 years is $528.28.

Learn more about simple interest here:

brainly.com/question/29800198

#SPJ4

The correct option is 2 because The negatively charged rod will induce a small amount of negative charge on the surface of the uncharged metal ball, causing a force of attraction between the two.

Although Earth is electrically neutral, its interior and crust each have a different charge. In clouds, the top face is negatively charged while the bottom face is positively charged.

About 90 to 95 percent of all lightning that you ever witness is negative lightning, which occurs when an ions is transported from a cloud to the ground. Positive lightning, on the other hand, occurs as a result of the positive charge that accumulates at the cloud's top.

To know more about Negatively charged visit:

https://brainly.com/question/7439274

#SPJ4

earth orbits the sun once every 365.25 days. find the average angular speed of earth about the sun.

99×10−7 rad/s.