Answer:
they are 10 but I'll be listing three
Explanation:
cirrus,cirrocumulus and cirrostratus
I hope this helps....good luck with the rest...again, I hope this helps
thermal energy is what we call energy that come from ___ of matter
Which materials allow electrons to flow through them?
A. Insulators only
B. Semiconductors and conductors
C. Conductors only
D. Semiconductors and insulators
The materials which allow electrons to flow through them are Semiconductors and conductors. Hence Option (B) is correct.
What are conductors ?A conductor, or electrical conductor, is a substance or material that allows electricity to flow through it.
In a conductor, electrical charge carriers, usually electrons or ions, move easily from atom to atom when voltage is applied.
Therefore, The materials which allow electrons to flow through them are Semiconductors and conductors. Hence Option (B) is correct.
Learn more about Conductor here ;
https://brainly.com/question/8426444
#SPJ5
Answer:semiconductors and conductors
Explanation:
when comparing ethanol and acetic acid, which one has the most polar bond? and what is that bond?
Answer:
Ethanol is another alcohol, and since there are less carbons in its chain, it will be more polar. So Ethanol is the most polar bond, it has two different types of bonding between its constituent atoms. The bonds between the hydrogen and carbon atoms are nonpolar covalent bonds. The hydrogen-oxygen and carbon-oxygen bonds are polar covalent bonds.
Explanation:
Cell Walls are found in Prokaryotes and Plant cells. True O False
Answer:
i think true
Explanation:
lemme know if right if not sorry :))
PLEASE HELP ITS RLLY IMPORTANT.
Consider the model of Ammonia to the right. Which terms would be used to describe this model? Element, molecule, and/or compound? Explain your reasoning.
The equivalence point in a titration refers to the point when
A. the mł of the acid equals the mL of the base.
B. the molarity of the acid used in the reaction equals the molarity of the base used in the reaction.
C. the number of moles of one reactant reacts completely with the moles of the other reactant.
D. the acid in the flask turns clear.
Answer:
C) the number of moles of one reactant reacts completely with the moles of the other reactant.
Explanation:
it's right put it
Answer:
C
Explanation:
Rocks are classified as sedimentary, metamorphic, or igneous on the basis of
the
a. age of the rocks.
b. way the rocks were formed.
c. types of fossils the rocks contain.
d. number of minerals found in the rocks.
Predict the product of the following Wittig reaction: You may want to draw out the reaction of a separate piece of paper before submitting your response. 2-butanone reacts with (C2H5O)2P=O--CHC.Hs with added heat in a potassium salt solution
a) Potassium diethyl phosphate
b) (z)-stilbene
c) 2-methylbut-1-enyl-benzene
d) 2-methylbutene diethyl phosphate
Answer:
c) 2-methylbut-1-enyl-benzene
Explanation:
From the information given:
Wittig reaction is essential for the creation of carbon-carbon bonds which results in the production of alkenes. The presence of the ketone compound ( 2-butanone) is because of its high electrophilic character of the carbonyl carbon. The reaction between 2-butanone with triethylamine in the presence of potassium salt is to catalyze the reaction. This reaction proceeds to yield the product 2-methylbut-1-enyl-benzene.
At room temperature, oxygen is a gas and hydrogen is a gas. When they combine at room temperature, they form a _______________.
Answer: they can combine to form water or hydrogen peroxide.
Explanation:
sorry if it wrong i just looked it up lol. hope this helps tho
Which system is affected by the process of weathering?
the hydrosphere
the atmosphere
the biosphere
the geosphere
[tex] \huge \colorbox{pink}{Answer☟︎︎︎}[/tex]
When ice melts, liquid water performs the act of erosion by carrying away the tiny rock fragments lost in the split. This specific process (the freeze-thaw cycle) is called frost weathering or cryofracturing. Temperature changes can also contribute to mechanical weathering in a process called thermal stress.
To make some oatmeal, Sally combined 40 grams of oatmeal, 10 grams of maple syrup, and some warm water. If the combined mass was 100 grams, how much water did she add?
ANSWER THIS EMEDIATLY PLEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEAAAAAAAAAASE
thank you
(ps.this is the closest subject to science (that deals with volume, mass, and matter you know that kind of stuff )that I could find
I guess this is free:)))): ((((
Answer:
tysm!!!! :D <<<33333
Explanation:
I need help please with the drop down menus
Answer:
When the archer releases the arrow, the elastic potential energy in the bowstring transforms into kinetic energy for the arrow.
Explanation:
When the string of a bow and arrow is pulled from equilibrium, the elastic potential energy in the bow is converted to kinetic energy of the arrow when the string is released.
______ occur between molecules that have permanent intramolecular differences in elecronegativity.
A. Dipole-dipole interactions
B. Dispersion forces
C. Hydrogen bonds
Answer:
Dipole-dipole interactions
Explanation:
Which of these elements has the lowest ionization energy?
A. Si
B. CI
C. S
D. Na
Answer:
D . Na
Explanation:
Which statement below best describes a volatile liquid?
Question 17 options:
1.A liquid that doesn't evaporate under atmospheric pressure
2.A liquid that evaporates slowly at low temperatures
3.A liquid that evaporates rapidly at low temperatures
4.A liquid that requires a large amount of energy to evaporate
Answer:
A liquid that evaporates rapidly at low temperatures
Explanation:
Answer:
A liquid that evaporates rapidly at low temperatures.
Explanation:
A volatile liquid such as gasoline evaporates easily. Its chemicals aren't held together as strongly, and room temperature is often enough to break intermolecular bonds and evaporate them.
PF
What is the mole ratio of iron (III) chloride (FeCl3) to zinc chloride (ZnCl2) ?
2 FeCl3 + 3 Zn → 2 Fe + 3 ZnCl2
a.2:2
b.2:3
c.3:3
d.3:2
Answer:C
Explanation:
Which resulted from the study of chemistry?
Answer:
I'm confused I think you're suppose to put a picture if you want someone to answer your question just saying.
Explanation:
Answer:
The understanding of the earth, air, fire, and water as the basic components of matter.
Explanation:
While performing a blatant flop togain a foul called on the opposing team, LeBron James scrapes his knee and begins to bleed. His personal doctor bursts ontothe court with hydrogen peroxide (H2O2) in to clean up his wound. If the doctor applied 6.43 x 1029 molecules of hydrogen peroxide to the infected area, how many grams of hydrogen peroxide (H2O2) were used?
A)3.14 g H2O2B)1.317 x 1055g H2O2C)3.63 x 107 g H2O2D)1.138 x 1052g H2O
Answer:
i hope u find what your looking for
Which element, when combined with fluorine, would most likely form an
ionic compound?
A. phosphorus
B. lithium
C. carbon
D. chlorine
Question 1 (4 points)
What is the molecular weight of Magnesium nitride, Mg3N2 (OR Mg3 N2). Report
your answer to two decimal places.
Do not include units with your answer.
The atomic weight of Mg is 24.31 grams/mole
The atomic weight of N is 14.01 grams/mole
Calculate the speed of a marble that rolls 9 cm in 4 seconds
Answer:
2.25
Explanation:
9/4
1. At an environmental testing lab, a lab technician calculated the known concentration of the calibrating solution three times too high. How will this affect the results of the samples run using this calibration solution
Answer:
The deviation in the results will be too large when compared with the actual result
Explanation:
The effect this will have on the results of the samples run using this Calibration solution is that the deviation in the results will be too large when compared with the actual result that was supposed to be obtained. and this will also lead to wrong analysis by the technician .
This will cause a result that is very different from the actual result, which will lead to errors in the analysis.
We can arrive at this answer because:
A laboratory test must be done accurately and all calibrations must follow the test protocol.Changing the calibration will cause inaccurate and incorrect results, which differ from the actual result.This will promote an analysis that is unreal, false, and far from true, which will leave the entire test inaccurate.As we can see from the question above, the lab technician used a much higher calibration than what was recommended in the lab. This will lead to inaccurate and incorrect results.
More information:
https://brainly.com/question/957129?referrer=searchResults
How many grams of water can be made from 6 moles of oxygen
At what minimum temperature do rocks melt into lava?
A) 3,500 degrees Celsius
B) 6,332 degrees Fahrenheit
C) 800 degrees Fahrenheit
OD 800 degrees Celsius
3. What is the difference between prodation and competition?
a. Competition is the demand for the same resource, precision is when one
organism eats another
b. Competition is when one organism eats another, predation is the demand for the
same resource
C. Competition always ends with one organismiling another, while predation is
when one organism just harms another
d. None of the above
please help me
is for my daughter
Answer:
I think you have to freeze the water itself then take the temp with a thermometer ️of each one then record how long it takes each one to start freezing then how long it takes for it to melt
Explanation:
sorry if I'm wrong but you have to do the experiment yourself then fill it out
Can someone please help me on this?
Answer:
a liquid
Explanation:
I'm not for sure but I just looked it up
How does shaking or stirring a mixture of solute and solvent affect a solution?
CA. It increases the solubility of the solute.
CB. It increases the rate of dissolving.
C C. It decreases the solubility of the solute.
D. it decreases the rate of dissolving.
what is the structure of methane
Answer:
CH4
Explanation:
if it is wrong, i blame my brain