Answer:
B. The wavelengths of light a molecule gives off when an electron moves to lower energy levels
Roundup, a herbicide manufactured by Monsanto, has the formula C3H8NO5P. How many moles of molecules are there in a 647.3-g sample of Roundup?
I got the answer 2.305 x 10^24 but for some reason it’s not working. Is it the wrong one?
Answer:
3.830177515 moles
Explanation:
You have :
647.3 g of RoundupMolar mass of Round up which is equal to 169 g.moland the formula: n=m/MTherefore: n=647.3/169
=3.830177515 moles
The frequency of an X ray is 6.5 x 1018 Hz. What is the X ray’s wavelength? .
Answer:
The X ray’s wavelength is 4.61*10⁻¹¹ m
Explanation:
Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave's disturbance propagates along its displacement. Relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f * λ.
In this case:
The frecuency f= 6.5*10¹⁸ Hz The speed v=c= 3*10⁸ [tex]\frac{m}{s}[/tex]Replacing:
3*10⁸ [tex]\frac{m}{s}[/tex]= 6.5*10¹⁸ Hz* λ
Solving:
[tex]wavelength= \frac{3*10^{8} \frac{m}{s} }{6.5*10^{18} Hz}[/tex]
λ= 4.61*10⁻¹¹ m
The X ray’s wavelength is 4.61*10⁻¹¹ m
An atom has an atomic number of 19 and mass number of 39 how many electrons and protons does it have?
Answer:
19 protons, 20 neutrons and 18 electrons.
Explanation:
The atomic number gives the number of protons 19
p = 19
The atomic mass is the sum of the protons and neutrons
p + n = 39 p = 19
put p into the equation and solve for n the neutrons.
19 + n = 39
Subtract 19 from both sides
19 − 19 + n = 39 − 19
n = 20
The number of electrons equals the number of protons in a neutral atom. The positive charge equals the negative charge. The negative charge is the number of electrons. This ion has a charge of +1. So solve for the negative charge.
− 19 + 1 = − 18
The negative charge is -18 so
e = 18
Read the following reactions. Reaction 1: CaO(s) + CO2(g) → CaCO3(s) Reaction 2: H2O(g) → H2O(l) Which reaction leads to an increase in entropy? Only Reaction 1 Only Reaction 2 Both Reaction 1 and 2 Neither Reaction 1 nor 2
Answer: In the given reactions neither reaction 1 nor 2 reaction leads to an increase in entropy.
Explanation:
The degree of randomness present in the molecules of a substance is called entropy.
In gases, molecules are held by weak forces due to which they move apart from each other. Hence, they have high entropy.
In liquids, molecules are a little close to each other so they have less entropy than gases.
In solids, molecules are tightly held together so they have least or negligible entropy.
As reaction 1 is [tex]CaO(s) + CO_{2}(g) \rightarrow CaCO_{3}(s)[/tex] and it shows that product is in solid state. Therefore, entropy is decreasing.
As reaction 2 is [tex]H_{2}O(g) \rightarrow H_{2}O(l)[/tex] and it shows that gas is converted into liquid. Therefore, entropy is also decreasing here.
Thus, we can conclude that in the given reactions neither reaction 1 nor 2 reaction leads to an increase in entropy.
Answer: Neither Reaction 1 nor 2
Explanation:
Tea contains which acid?
A
Tannic acid
B
Tartaric acid
C
Carbonic acid
D
Citric acid
what is the formula for number of moles?
Answer:
number of moles=volume/molar volume or mass/molar mass
Which are the fundamental particles whose masses are mainly responsible for the mass of an atom?Give Reason
No links
Answer:
Proton & neutron
Explanation:
electrons only affect the charge. neutrons affect the mass and stability of an atom.
When does the electron shown release the greatest amount of energy as it moves from one level to another
Answer:
s1 to GS as the amount of energy required to remove the electron is greatest when it is closest to the nucleus.
Explanation:
Fun facts:
When the electron changes levels, it decreases energy and the atom emits photons. The photon is emitted with the electron moving from a higher energy level to a lower energy level. The energy of the photon is the exact energy that is lost by the electron moving to its lower energy level.
Answer:
The answer is: S.1 to G.S
Hope this helpss :) <3
Explanation:
in which of the following type of colloid, the physical state of dispersed phase and dispersion medium is same?
Gel
Foam
Emulsion
Aerosol
Answer:
Emulsion
Explanation:
According to Oxford dictionary, a colloid is, ''a homogeneous non-crystalline substance consisting of large molecules or ultramicroscopic particles of one substance dispersed through a second substance. Colloids include gels, sols, and emulsions; the particles do not settle, and cannot be separated out by ordinary filtering or centrifuging like those in a suspension.''
An emulsion is a dispersion of a liquid in a liquid. This means that the the physical state of dispersed phase and dispersion medium is same.
Examples of emulsions include; Vinaigrette, homogenized milk and hair cream.
write a word equation for the reaction between dilute hydrochloric acid and magnesium
definition of boiling point
Answer:
boiling point, temperature at which the pressure exerted by the surroundings upon a liquid is equaled by the pressure exerted by the vapour of the liquid; under this condition, addition of heat results in the transformation of the liquid into its vapour without raising the temperature.
Explanation:
Radhe Radhe❤
Explanation:
The point at which a matter melts is called boiling or melting point.
Identify the atom oxidized, the atom reduced, the oxidizing agent, and the reducing agent.
SO2+ 2H2S----> 3S + 2H2O
Explanation:
here is the answer bae. Feel free to ask for more chem help
If a tornado causes considerable damage with wind speeds of 111 to 135 miles per hour, it’s classified as _______ on the Enhanced Fujita Scale.
The type of major storm called a/an _______ is driven primarily by the Coriolis effect.
The weather pattern that stays over one area for an extended period of time is known as _______.
What are the two types of downbursts, and how are they different?
How is a funnel cloud different from a tornado?
Why does a hurricane begin to dissipate after it makes landfall?
Explain how the heat index and the wind chill index are similar and different.
What type of severe weather prevents sweat from evaporating to cool down bodies?
Answer:
EF-2
hurricane/tropical cyclone
recurrent weather
The two types of downbursts are macrobursts and microbursts. A macroburst affects an area that's greater than 2.5 miles across. A microburst affects an area that's less than 2.5 miles across.
A funnel cloud forms as a spinning column of air that descends from a thundercloud. However, a funnel cloud doesn't become a tornado until it actually touches the ground. Once it touches the ground, where it begins to pick up dust and debris, it becomes a tornado.
Tropical cyclones, such as hurricanes, are fueled by warm ocean waters. Once they make landfall, they lose this fuel source and begin to lose strength.
The heat index and the wind chill index are similar because both consider other factors that affect how air temperature feels. The heat index considers relative humidity in relation to air temperature. Higher humidity makes air temperatures feel hotter. The wind chill index considers wind speed in relation to air temperature. Higher wind speeds make air temperatures feel colder.
Heat waves—Heat waves can be very dangerous when accompanied by high humidity. The human body depends on evaporation of sweat to cool itself down on hot days. When humidity levels are high, the rate of evaporation slows down. Consequently, it becomes harder for the body to cool itself and much easier for the body to overheat.
Explanation:
took the testoronee
What does Seltzer Water have in common with Limestone ?
If 3.02 g of CuNO3 is dissolved in water to make a 0.560 M solution, what is the volume of the solution in milliliters?
Answer: The volume of the solution is 28.75 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of copper nitrate = 0.560 M
Given mass of copper nitrate = 3.02 g
Molar mass of copper nitrate = 187.56 g/mol
Putting values in equation 1, we get:
[tex]0.560=\frac{3.02\times 1000}{187.56\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{3.02\times 1000}{187.56\times 0.560}=28.75mL[/tex]
Hence, the volume of the solution is 28.75 mL
Solve for a, b, c, AND d
d
C
84°
930
970
b
How do I solve for a and b using the Van Der Waals equation using only the given values: P= 1 atm, V= 1.310 L, and T= 160 K
Answer:
[tex]a = \frac{24.79078- 1.7161b}{1.310 - b}[/tex]
[tex]b = 1.310 - \frac{22.5427}{a - 1.7161}[/tex]
Explanation:
Given
[tex]P = 1\ atm[/tex]
[tex]V = 1.310\ L[/tex]
[tex]T =160\ K[/tex]
Required
Solve for a and b
Van Der Waals equation is:
[tex]P = \frac{RT}{V - b} - \frac{a}{V^2}[/tex]
Substitute values for P, V and T, we have:
[tex]1 = \frac{R*160}{1.310 - b} - \frac{a}{1.310^2}[/tex]
R is a constant and the value is:
[tex]R = 0.0821[/tex]
So, the equation becomes:
[tex]1 = \frac{0.0821*160}{1.310 - b} - \frac{a}{1.310^2}[/tex]
Simplify the expression
[tex]1 = \frac{13.136}{1.310 - b} - \frac{a}{1.7161}[/tex] ----- (a)
Solving for (a):
[tex]1 + \frac{13.136}{1.310 - b} = \frac{a}{1.7161}[/tex]
Multiply both sides by 1.7161
[tex]a = [1 + \frac{13.136}{1.310 - b}] * 1.7161[/tex]
Take LCM
[tex]a = [\frac{1.310 - b+13.136}{1.310 - b}] * 1.7161[/tex]
Evaluate like terms
[tex]a = [\frac{14.446- b}{1.310 - b}] * 1.7161[/tex]
Open bracket
[tex]a = [\frac{24.79078- 1.7161b}{1.310 - b}[/tex]
Solving for (b), we have:
[tex]1 + \frac{13.136}{1.310 - b} = \frac{a}{1.7161}[/tex]
Subtract 1 from both sides
[tex]\frac{13.136}{1.310 - b} = \frac{a}{1.7161}-1[/tex]
Take LCM
[tex]\frac{13.136}{1.310 - b} = \frac{a-1.7161}{1.7161}[/tex]
Inverse both sides
[tex]\frac{1.310 - b}{13.136} = \frac{1.7161}{a - 1.7161}[/tex]
Multiply both sides by 13.136
[tex]1.310 - b = 13.136 * \frac{1.7161}{a - 1.7161}[/tex]
[tex]1.310 - b = \frac{22.5427}{a - 1.7161}[/tex]
Collect like terms
[tex]b = 1.310 - \frac{22.5427}{a - 1.7161}[/tex]
0.30 kg cart moves on an air track at 1.2 m/s.It collides with and sticks to another cart of mass 500 g,which was stationary before collision. What is the velocity of the combined carts after collision?
Which statement best describes wave-particle duality as it applies to electrons?
A. The electrons present in radio waves and microwaves act more like particles than waves.
B. Electrons are particles that emit waves of radiation when they move from higher energy levels to lower energy levels.
с.Electron clouds can be understood as clumps of particles held near one another by wave forces.
D.Electrons can be modeled as waves in some situations and as particles in other situations.
Answer:
D es pero que te ayude amigo
Some one help me with these real quick I need help with questions 4 & 6.!
Answer:
4 is chemical and 6 is a
Explanation:
hope this helps
The student is now told that the four solids, in no particular order, are aluminum chloride (AlCl3AlCl3), sugar (C6H12O6C6H12O6), butanoic acid (C3H7COOHC3H7COOH), and potassium bromide (KBrKBr), and potassium bromide (KBr). Assuming that conductivity is correlated to the number of ions in solution, rank the four substances based on how well a 0.20 M solution in water will conduct electricity. Rank from most conductive to least conductive. To rank items as equivalent, overlap them.
Answer:
aluminum chloride> potassium bromide> butanoic acid> sugar
Explanation:
Conductivity has to do with the ability of a solid to dissolve in solution leading to the formation of mobile ions which are the charge carriers in solution.
Strong electrolytes produce more ions in solution hence they have a higher conductivity.
Aluminum chloride produces four particles in solution hence it has the highest conductivity followed by potassium bromide which produces two particles in solution. Butanoic acid is a weak electrolyte which dissociates only to a small extent while sugar is a nonelectrolyte, it does not dissociate at all in solution.
The expression below was formed by combining different gas laws. V is proportional to StartFraction n T over P EndFraction. Which law was used to determine the relationship between the volume and the number of moles in this equation?
Answer:
The Ideal gas law
Explanation:
From the given question, we have:
V [tex]\alpha[/tex] [tex]\frac{nT}{P}[/tex]
where each variable has its usual meaning.
Thus,
V = [tex]\frac{nRT}{P}[/tex]
where R is the ideal gas constant
cross multiply to have;
PV = nRT
This implies that the volume of the gas is directly proportional to the number of moles of the gas.
Therefore, the law can be used to determine the relationship between the volume and number of moles is the ideal gas law.
Helppppp plz ASAP DON’T GUESS
Explanation:
A B C D isme koyi ans hain doond lo
a shiny brown colured metal onhaeting in air becomes black in colour when hydrogen gas is passed over the black substance it regain its original colour a]what type of chemical reaction takes place in each of the two given steps
Oxidation reaction
Hope this helps! :)
SOMONE HELP DUE IN 5 MINUTES
Answer:
Silicon
Explanation:
Nucleus
14 protons
Group 14
Number 14
+4, +2, or -4
Answer:
Explanation:
Name of the part of this atom labeled z is nucleus.
number of protons is 14 .
the given element is silicion and it lies in group 14.
the no of period that contains this element is 3.
charge formed on the ion formed from this atom is positive charge because it gives 4 electron to other element .
If the element gains the electron then it has negative charge where as when it loses it will have positive charge.
Which statement best summarizes what happens during cellular respiration?
A. Energy in food is released and stored in ATP molecules.
B. Energy from sunlight moves through a food web.
C. Chemical energy is converted to kinetic energy.
D. Solar energy is converted and stored in chemical bonds.
Answer:
A
Explanation:
B is for photosynthesis, C and D are just energy conversions, A is all about producing energy and stored as Adenosine Triphosphate(ATP) which is respiration
CHEM FINAL PLEASE HELP
This is?
alkene
aromatic hydrocarbon
alkyne
alkane
Answer:
It is alkyne
Explanation:
give few property of PET
Answer:
Transparency to visible light and microwaves. Very good resistance to ageing, wear and heat. Lightweight, impact and shatter resistant. Good gas and moisture barrier properties
Explanation:
Answer:
Your Welcome! :)
Explanation:
What are the Characteristics of Polyethylene terephthalate (PETE or PET)?
Chemical Resistance: PET does not react with water or food which is one of the reasons it is used for consumable packaging.
Strength to Weight Ratio: PET is very strong for its lightweight.
Shatterproof: PET will not break or fracture.
Draw the structure formula of 2methylbutanoate
Answer:
[tex]CH _{3}CH(CH _{3})CH _{2}COO {}^{ - } \\ \\ [/tex]
6. La electronegatividad es una propiedad periódica que incide en un enlace químico verdadero o falso? Si es falso, porque?
Answer:
Verdadero.
Explanation:
¡Hola!
En este caso, dado que las propiedades periódicas nos hablan de un comportamiento específico sobre los elementos en la tabla periódica, resulta primeramente necesario recordar que la electornegatividad nos dice que tan fuerte es un elemento para atraer electrones de valencia de otros elementos.
De este modo, inferimos que es verdadero, ya que de hecho la electronegatividad nos define el tipo de enlace, basado en la diferencia de electronegatividades de los elementos enlazados, de acuerdo con la imagen adjunta.
Saludos!