Answer:
An energy level is the average distance of an electron from the nucleus. 01 ...
Answer:
The energy possessed by an electron at a set distance from the nucleus.
Explanation:
Word for word (apex)
To help relieve pain during a dental visit, a dentist may give a patient nitrous oxide. Nitrous oxide is made in factories by carefully heating ammonium nitrate. At 170°C, ammonium nitrate breaks down and forms a mixture of nitrous oxide gas and water vapor. After the mixture is collected, the water vapor is separated from the nitrous oxide gas. Complete the sentence.
Answer:
The answer is "Ammonium nitrate is the reactant of this chemical reaction".
Explanation:
The Ammonium nitrate (NH4NO3) is an ammonium and nitrate ionic crystalline solid. In water and hygroscopic as a strong, it's also highly soluble, although it does not form hydrates.
It uses as a nutrient for generating medications as well as leaven fertilizers and explosive materials. Nitrate in ammonium is sodium bicarbonate ammonium chloride. It is incendiary, an oxidizing agent, and a fertilizer.
0. 01 M HCl solution has a pH of 2. Suppose that during the experiment, both the universal pH indicator and the cabbage indicator turn orange-red for 0. 01 M HCl. What can you conclude about the the cabbage indicator key? It matches the universal pH indicator and is indicating the proper pH. It should completely match the universal indicator key for all pH values greater than 7 (base). It should completely match the universal indicator key for all pH values. There was some sort of experimental error, because the indicators should never match.
Answer:
a.) It matches the universal pH indicator and is indicating the proper pH.
Explanation:
it says its the answer.
Answer:
Explanation:
An object is thrown vertically from the ground upwards with a speed of 10 m/s. Considering g = 10 m/s2, the maximum height that the object reaches from the ground, in meters, will be:
a) 15.0.
b) 10.0.
c) 5.0.
d) 1.0.
e) 0.5.
HELP!!!!!
Find the volume of a gas at STP (STP is 0oC and 1atm), if its volume is 80.0 mL at 109 kPa and –12.5oC.
(I will give brainliest. Thank you so much!)
Answer:
90.6 mL.
Explanation:
Recall the ideal gas law:
[tex]\displaystyle PV = nRT[/tex]
Where P is the pressure; V is the volume; n is the number of moles of gas; R is the universal gas constant; and T is the absolute temperature.
Because only P, V, and T changes, we can rearrange the equation to:
[tex]\displaystyle \frac{PV}{T}= nR[/tex]
The right-hand side is some constant. In other words:
[tex]\displaystyle \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}[/tex]
The initial measurements are 109 kPa, -12.5 °C, and 80.0 mL.
Convert kPa to atm:
[tex]\displaystyle 109\text{ kPa} \cdot \frac{1\text{ atm}}{101.3 \text{ kPa}} = 1.08\text{ atm}[/tex]
And convert temperature to kelvins:
[tex]\displaystyle T_k = (-12.5) + 273.15 = 260.6\text{ K}[/tex]
STP is given by 1 atm pressure and 0 °C (273.15 K). Hence, substitute:
[tex]\displaystyle \frac{(1.08\text{ atm})(80.0\text{ mL})}{(260.6\text{ K})} = \frac{(1\text{ atm})V_2}{(273.15\text{ K})}[/tex]
Solve for volume:
[tex]\displaystyle V_2 = 90.6\text{ mL}[/tex]
In conclusion, the volume of the gas at STP is 90.6 mL.
Check: Volume is indirectly proportional to pressure and directly proportional to temperature. Because we decreased the pressure (1.08 atm to 1.00 atm) and increased the temperature (260.6 K to 273.15 K), we should expect an overall increase in volume.
Observe Record the appearance (colors,
textures, etc.) of the reactants in the data table.
The reactant Zn is
A. An element
B. An iconic compound
C. A molecule
D. An oxide
The reactant CuSO4 İs
A. An element
B. An iconic compound
C. A molecule
D. An oxide
Answer:
1) Zn is a element
2)CuSO4 is an ionic compound
Explanation:
Answer: an element and an ionic compound
Explanation: my mom told me
What is conduction? (4 points)
a Transfer of heat through circular movement
b Transfer of heat through direct physical contact
c Transfer of heat through electromagnetic waves
d Transfer of heat through the movement of particles
Answer:
Your Answer would be Option B
Answer:
B
Explanation:
The Answer is B-Transfer of heat through direct physical contact
Jim needs to conduct his experiment at STP
Which condition must he use?
0 273 K, 101.3 kPa
100 K, 273 kPa
O 100 K, 273 Pa
O 273 K, 101.3 Pa
Answer:
273 K, 101.3 kPa
Explanation:
the standard pressure he can use is 101.3 kPa and standard temperature= 273 K
A pond has the dimensions of 25 meters long by 20 meters wide. If there are 100 frogs living in the pond, what is the "population density" of the frogs?
A. 0.2frogs/sq meter
B. 0.5 frogs/sq meter
C. 2 frogs/sq meter
D. 5 frogs/sq meter
HELPP its a test!
Answer:
D. 5 frogs/sq meter
Explanation:
To what volume should 25 ml of 15 M nitric acid be diluted to prepare a 3.0 M solution?
Answer:
We can use the dilution formula to find the volume of the diluted solution to be prepared
c1v1 = c2v2
Where c1 is concentration and v1 is volume of the concentrated solution
And c2 is concentration and v2 is volume of the diluted solution to be prepared
Substituting the values in the equation
15 M x 25 mL = 3 M x v2
v2 = 125 mL
The 25 mL concentrated solution should be diluted with distilled water upto 125 mL to make a 3 M solution
hello people ~
Which of the reactions is used in black and white photography?
(a) Combination Reaction
(b) Decomposition Reaction
(c) Displacement reaction
(d) Oxidation reaction
Answer:
B. Decomposition reaction
Explanation:
When silver chloride is kept in the sun, it decomposes to form chlorine gas and silver. As the reaction proceeds, the white coloured silver chloride turns grey because of the formation of silver. Chlorine produced in the reaction escapes into the environment as it is produced in the gaseous state.
2AgCl(s) + light → 2Ag(s) + Cl²(g)
As the above reaction is sensitive to light, they are used in black and white photograph.
what kind of bond is present in HCI
Explanation:
HCL is a binary compound consiting of two atom a Hydrogen and a chlorine atom both of these and non-metallic atom and so will from a covalent bond between them
Which of the following could occur as a result of
decreasing the heat energy of a gas?
A. condensation
B. evaporation
C. radiation
D. vaporization
Answer:
A
Explanation:
Because, condensation occurs due to the drop in the temperature of the gas therefore turning into liquid.
Which element has chemical properties that are most similar to the chemical properties of sodium?
Answer:
Lithium
Explanation:
So, the elements with similar properties to sodium (Na) are all of those elements in the same Group. The ones "most" similar would be the ones closest in mass as well. Those would be Lithium (Li) and Potassium (K)
a chemical reaction occurs when blank
Answer:
When atoms are formed or broken.
Explanation:
The substances that go into a chemical reaction are called the reactants, and the substances produced at the end of the reaction are known as the products.
Zinc reacts with Vibranium (II) chloride to produce zinc chloride and Vibranium. Write the word equation for this reaction.
Answer:
The net reaction is Zn(s) + 2H +(aq) → Zn2+(aq) +H 2(g) The Cl− ions are spectators - they don't change. This experiment includes the reaction of zinc with hydrochloric acid.
Answer:
Explanation:
An object is thrown vertically from the ground upwards with a speed of 10 m/s. Considering g = 10 m/s2, the maximum height that the object reaches from the ground, in meters, will be:
a) 15.0.
b) 10.0.
c) 5.0.
d) 1.0.
e) 0.5.
25 m/s to miles/hr? pls show work!
Answer:
25 miles per second to X miles per hour
Formula = for an approximate result, multiply the speed value by 2.23
25 m/s x 2.23 ≈ 55.92 mph
Which group of 3 elements are in the 3d sublevel?
Silicon (Si), Phosphorus (P), Chlorine (CI)
Vanadium (V). Nickel (Ni), Iron (Fe)
Zinc (Zn). Palladium (Pd). Osmium (76)
Arsenic (As), Zinc (Zn). Calcium (Ca)
that is the one i need help with
Answer:
79
Explanation:
This is the answer I نخل جکڑ disparity disguising
What’s the answer ????
Answer: For disadvantages, 1,2, and 3.
Phosphatidic acid is converted into diacylglycerol via _______, which catalyzes removal of a phosphate group.
Answer:
phosphatase
Explanation:
How many moles of oxygen gas would be needed to react with 155 g of propane gas,
C3Hg, in a combustion reaction?
C3H8 (g) + 502 (g)
+
-> 3CO2 (g) + 4H20 (1)
Taking into account the reaction stoichiometry, 17.61 moles of O₂ is required to react with 155 grams of C₃H₈.
Reaction stoichiometryIn first place, the balanced reaction is:
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
C₃H₈: 1 mole O₂: 5 moles CO₂: 3 moles H₂O: 4 molesThe molar mass of the compounds is:
C₃H₈: 44 g/moleO₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
C₃H₈: 1 mole ×44 g/mole= 44 gramsO₂: 5 moles ×32 g/mole= 160 gramsCO₂: 3 moles ×44 g/mole= 132 gramsH₂O: 4 moles ×18 g/mole= 72 gramsMass of O₂ requiredThe following rule of three can be applied: if by reaction stoichiometry 44 grams of C₃H₈ react with 5 moles of O₂, 155 grams of C₃H₈ react with how many moles of O₂?
[tex]moles of O_{2} =\frac{155 grams of C_{3} H_{8}x5 moles of O_{2} }{44 grams of C_{3} H_{8}}[/tex]
moles of O₂= 17.61 moles
Finally, 17.61 moles of O₂ is required to react with 155 grams of C₃H₈.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
What is the chemical equation for the decomposition reaction of sulphuric acid?
9) A solid magnesium flare has a mass of 2300 g and a volume of 703 cm3. What is the density of the
g
magnesium?
Answer:
siks creo que creo que siks
Elements in the periodic table are arranged in order of increasing atomic mass?
True or false
H3PO4 +CaCOH)2=Ca3(PO4)2+H20
The equation balance
Answer:
2H3PO4 +3Ca(OH) 2 = Ca3 (PO4) 2 +6H20
How does the mass of each atom compare to the average atomic mass of the
element given in the periodic table? *
The mass given in the periodic table is a weighted average of all isotopes of an element. For example Hydrogen is normally just one proton so one would expect its atomic mass to be exactly 1, but there are other naturally occurring isotopes of H (deuterium with a mass of 2 and tritium with a mass of 3) that have more neutrons resulting in a weighted average slightly greater than 1.
The mass of the atoms is given by the number of neutrons and protons. The mass of the atom and the average mass of the element looks a little different due to mass defect.
What is a mass defect?The mass defect has been the difference in the mass and the average mass of the elemental atom. It has been the energy that binds the neutrons and the protons together in the nucleus. The mass and the average atomic mass differ slightly.
The mass of an individual atom differs from the average atomic mass as average atomic mass is the sum of the masses of the isotope of the elements. Isotopes have little difference in masses due to the number of neutrons. For example mass and average atomic mass of hydrogen differs.
Therefore, the mass and the average atomic mass differ.
Learn more about the mass defects, here:
https://brainly.com/question/16485729
#SPJ2
Lanthanum emits gamma radiation with a wavelength of 1.24 x 10-31 meters. How
much energy is in this gamma ray?
Answer:
e = 1.60x10⁶J
Explanation:
It is possible to find the energy from the wavelength of the radiation as follows:
e = c*h / λ
Where e is energy in joules
c is light velocity (3.0x10⁸m/s)
h is Planck's constant (6.626x10⁻³⁴Js)
And λ is wavelength in meters (1.24x10⁻³¹m)
e = 3.0x10⁸m/s*6.626x10⁻³⁴Js / 1.24x10⁻³¹m
e = 1.60x10⁶J
How do multiple bonds affect the shape of a molecule?.
Answer:
hyprogenic
Explanation:
hope it's help
make me brainless tyy
How many moles are in 13.0g of potash (KOH)?
Answer:
0.232 moles
Explanation:
because the mass is 13.0g and the relative molecular mass is 56.1049
Which of the following is an example of a phase change from liquid to gas?
A. Water freezing
B. Ice melting
C. Water evaporating
D. Water condensing
SUBMIT
Apex ?
A sample of argon gas is at a temperature of 20 degrees celsius. The temperature is increased to 30 degrees celsius so that the volume is now 373 mL. What was the original volume?
The original volume is equal to 248.6 mL.
General gas law
To find the value of pressure, volume or temperature of a gas after a transformation, one must use the general gas law:
[tex]\frac{P_1 V_1}{T_1} =\frac{P_2 V_2}{T_2}[/tex]
Thus, as the pressure does not change, it is enough to substitute the values in the above formula, such that:
[tex]\frac{V_1}{20}=\frac{373}{30} \\ V_1 = 248.6mL[/tex]
So, the original volume is equal to 248.6 mL.
Learn more about gas law in: brainly.com/question/1190311