Proton number is called atomic number.
The chemical element's atomic number, also referred to as the nuclear charge number, is determined by the charge number of an atomic nucleus. This is the quantity of protons in the nucleus of each of that element's atoms. The atomic number refers to the number of protons in the nucleus of an atom. The amount of protons in an element determines what kind of element it is.
Both protons and electrons are equal in number in a neutral atom. The mass of an atom, represented by the letter M, is equal to the total of its protons and neutrons in the nucleus.
The number of protons in the atom's nucleus is therefore equal to the atomic number (Z). in an uncharged atom.
Learn more about atomic numbers:
brainly.com/question/16858932
#SPJ4
Calcium phosphate, Ca 3(PO 4) 2, is used to treat calcium deficiencies. What is the molar mass of this compound
Ca3(PO4)2 has a molar mass of 310.18 g/mol.
Molar mass: What is it?The sum of the molar masses of a compound's component parts determines its molar mass. The molar masses of calcium, phosphorus, and oxygen must be added up in order to determine the molar mass of Ca3(PO4)2.
The molar mass of calcium is 40.08 g/mol.
The molar mass of phosphorus is 30.97 g/mol.
The molar mass of oxygen is 16.00 g/mol.
There are 3 moles of calcium, 2 moles of phosphorus, and 8 moles of oxygen in the compound Ca3(PO4)2.
As a result, the formula for calculating the compound's molar mass is: 340.08 + 230.97 + 8*16 = 120.24 + 61.94 + 128 = 310.18 g/mol
Consequently, Ca3(PO4)2 has a molar mass of 310.18 g/mol.
To know more about molar mass visit: https://brainly.com/question/12127540
#SPJ4
What are the types of elements answer?
The three types of elements are metals, non-metals as well as metalloids, there are placed in a periodic table.
In a periodic table, metals are placed in s-block and d-block. While non-metals as well as metalloids are placed in p-block. Metals are generally lustrous, malleable as well ductile in nature and are usually hard in nature while non-metals lack these properties. Metalloids are the elements whose chemical as well as physical properties lies between both metals and non-metals. Examples of metals are sodium and potassium. Examples of non-metals are carbon and phosphorus while examples of metalloids are silicon and germanium.
To learn more about elements check the link below:
brainly.com/question/25916838
#SPJ4
Identify the Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ? Pt(NH3)4,2+(aq)
a) Pt2+
b) NH3
c) Pt(NH3)4,2+
The Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ?Pt(NH3)4,2+(aq) is : a) Pt2+.
What do you understand by a Lewis acid?Platinum ion (Pt2+) ( P t 2 + ) is a Lewis acid in the given reaction because it accepts pair of electron from ammonia.
A Lewis acid is any substance, such as H+ ion, that can accept a pair of nonbonding electrons. In other words, Lewis acid is an electron-pair acceptor. Lewis acid is chemical species that has an empty orbital which is capable of accepting electron pair from Lewis base to form a Lewis adduct.
To know more about Lewis acid, refer
https://brainly.com/question/12326649
#SPJ4
Is this water or oil
Answer:
it is oil.
Explanation:
it is oil because if water was written that would be wried so I think it is oil.
How many cm is meter stick?
100 cm is meter stick.
Centimeter is denoted by the (cm). It is a metric unit of the measurement which is used for measuring the length of an object.
Meterstick is a foldable ruler which is used to measure the length, and it is common in the construction industry. They are made up of wood or plastic and often they have a plastic or metal joints so that they can be folded together.
A meter measuring stick, which is one meter (39.37 inches) long, it contains 100 centimeters. Thus, centimeter is equal to one-hundredth of a meter. The word centimeter comes from the late 18th-century. The word centimeter derived from the Latin root "centum"/ means "hundred" and the Greek root "metron", meaning "measure".
To know more about length here
https://brainly.com/question/30100801
#SPJ4
Why is it important to recycle electronic waste?
It saves energy, minimizes air and water pollution, cuts greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and otherwise decreased its trash by 62% and reduced landfill by 35%.
What is recycle?It saves energy, minimizes air and water pollution, cuts greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and otherwise decreased its trash by 62% and reduced landfill by 35%. The process of transforming waste resources into new materials and things is known as recycling. This notion frequently includes the recovery of energy from waste materials. The capacity of a material to regain the attributes it had in its original form determines its recyclability. Recycling is the collection and processing of items that would otherwise be discarded as waste in order to create new goods. Recycling may help your town, economy, and environment.
Here,
It saves energy, decreases air and water pollution, lowers greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and avoided landfill by 62% and 35%, respectively.
To know more about recycle,
https://brainly.com/question/26807121
#SPJ4
Balance the following equation. Do
H₂+NO → H₂O + N₂
✓
V
V2 + 2NO → 2H2O + N2 The equation is balanced by adding an additional coefficient (2) to the hydrogen (H2) and water (H2O) molecules on the product side.
What is balanced?Balanced is a term used to describe a state of equilibrium or harmony. It implies a situation where all elements are in proportion and none are out of place or dominant. This could describe a healthy diet that provides a balance of proteins, carbohydrates, and fats, or a successful family life where time is shared between work, play, and private activities. Balance is also a key factor in physical and mental health, when all aspects of life are in alignment it allows for a more fulfilling and enjoyable experience.
This ensures that the number of atoms of each element is equal on both sides of the equation. In other words, the number of atoms of hydrogen (H2) and water (H2O) molecules on the left side of the equation must be equal to the number of atoms of hydrogen (H2) and water (H2O) molecules on the right side of the equation.
To learn more about balanced
https://brainly.com/question/18809694
#SPJ1
The normal boiling point of Br2(l) is 58.8 ?C, and its molar enthalpy of vaporization is ?Hvap = 29.6kJ/mol.
When Br2(l) boils at its normal boiling point, does its entropy increase or decrease?
increase
decrease
When Br2(l) boils at its normal boiling point, its entropy increases as it is positive.
What is meant by entropy?The level of randomness found inside a substance's molecules is known as entropy.
The temperature at which atmospheric pressure and a liquid's vapor pressure are equal is known as the boiling point.
The amount of heat energy required to convert one mole of a substance from its liquid state into its gaseous state at constant temperature and pressure is referred to as the molar enthalpy of vaporization.
Entropy increases when a liquid is heated because the randomness between the molecules increases. As a result, entropy will rise.
To know more about entropy, refer
https://brainly.com/question/419265
#SPJ4
1. An organ which receive the waste product carried by the blood.
4. It is a gas that the body needs.
6. It is a combination of hemoglobin and oxygen that enters the body.
7. The respiratory and digestive work as it absorbed
that being
distributed through the body.
10. The system responsible for digestion of food
Down:
2. The ability to maintain a relatively stable internal state that persist despite
changes in the world outside,
3. The respiratory and circulatory work together by exchanging of
5. The signal that circulatory system carries that control the speed of digestion.
8. The system responsible of exchange of gases
9. The system carries nutrients to the entire body cells.
1. Kidney receive the waste product carried by the blood.
2. Homeostasis is the ability to maintain a relatively stable internal state that persist despite changes in the world outside.
3. The respiratory system and circulatory system work together by exchanging of oxygen and carbon dioxide.
4. Oxygen is a gas that the body needs.
5. Chemical signals are carried out by circulatory system that control the speed of digestion.
6. Oxyhemoglobin is a combination of hemoglobin and oxygen that enters in the body.
7. The respiratory system and digestive system work as it absorbed oxygen that being distributed through the body.
8. The respiratory system is responsible for exchange of gases.
9. The circulatory system carries nutrients to the entire body cells.
10. The digestive system is responsible for food digestion.
Learn more about circulatory system visit:
brainly.com/question/29773718
#SPJ4
How many electrons are neutral in c14?
Neutral carbon-14 contains six electrons, six protons, eight neutrons.
- The smallest particle that may exist, an atom, is what creates the entire cosmos. It has a core nucleus that houses the neutral species known as neutrons and positively charged species known as protons.
The orbit of the nucleus is being circled by negatively charged species of electrons. The atomic number of an atom is determined by its protons, and the number of protons is always equal to the number of electrons.
The carbon-14 in this instance is an isotope of carbon-12 with a mass number of 14. Atomic number six carbon has a total of six protons and six electrons.
Learn more about atomic number at brainly.com/question/8834373
#SPJ4
A seismograph measures the size of a volcano eruption.
O True
O False
(This is for Science btw)
Answer:
This is true. A seismograph measures the size of a volcano eruption by detecting the vibrations that are produced by the volcanic activity. The vibrations can then be converted into a numerical value that represents the magnitude of the eruption.
Explanation:
what is a balanced nuclear equation for power generation?
A balanced nuclear equation for power generation by nuclear fission is given below:
²³⁵₉₂U + ¹₀n ---> ⁹²₃₆Kr + ¹⁴¹₅₆Ba + EnergyWhat is nuclear fission?The process of nuclear fission involves the splitting of an atom's nucleus into two or more smaller nuclei. Even by the energetic standards of radioactive decay, the fission process releases a very high quantity of energy and frequently results in gamma photons.
Nuclear fission is applied in nuclear power generation in a nuclear reactor.
The fissionable nuclear material is separated in the nuclear reactor so that a critical mass cannot exist, and the neutron flux and absorption are controlled to stop the fission reactions. The energy released during fission processes in a nuclear reactor used to generate electricity is trapped as thermal energy and used to heat water and create steam. The steam is utilized to turn a turbine, which powers an electricity-generating generator.
Learn more about nuclear fission at: https://brainly.com/question/3992688
#SPJ1
A chemist is studying the composition of a sample of ocean water. He gently heats the sample to evaporate the water, leaving him with the solid substances that had been dissolved in the sample. Next, he performs a series of procedures to separate the solid substances from each other. Finally, he measures how much of each solid he has obtained. What substance would he probably have the most of
The substance that he will have the most will be sodium chloride.
More than 70% of the surface of the Earth is covered by seawater, the liquid that makes up the oceans and seas. 96.5 percent of seawater is made up of pure water, 2.5 percent salt, and minor amounts of dissolved inorganic and organic compounds, particles, and a few atmospheric gases.
When a chemist analyzes the composition of a sample and heats it to cause the water to evaporate, he is left with the solid substances that had been dissolved in the sample. Sodium chloride is the most significant salt that is created by ocean water. He next goes through a series of steps to separate the solid materials from one another. The highest substance found in ocean water, according to his measurements, is salt, specifically sodium chloride.
Learn more about sodium chloride
brainly.com/question/9811771
#SPJ4
What is the relationship between CO2 and O2 for sea urchins?
The relation between CO₂ and O₂ for sea urchins is impacted by the rise in carbon dioxide and oxygen is absorbed from the water.
The exoskeleton of sea urchins, which are found in the ocean, is comprised of calcium carbonate. They create calcium carbonate by absorbing the carbon dioxide from the water. As waste, they discharge carbon dioxide out of the anus.
The sea urchin takes its oxygen from the water. In the canals, oxygen diffuses. Oxygen diffuses into the cells from canals. The ocean's pH may rise as a result of the increased carbon dioxide. A higher pH has a deleterious impact on the calcification process. Therefore, the increased carbon dioxide has an impact on how the larvae and adults of sea urchins calcify.
To know more about exoskeleton here
https://brainly.com/question/1470572
#SPJ4
An inland area has little water or plant life.
What would the climate of this place likely be?
The inland area has a Continental climate.
Inland climates are typically more severe. Summers might be quite hot, and winters could be very frigid. Rainfall can be scarce.
In inland area the water bodies take long time to heat up and cool down, so they absorb all the heat during the spring and summer when the sun is at its greatest before slowly losing it throughout the fall and winter when the temperature starts to drop.
On the other hand, it warms up and cools down far more quickly on land, that's why the inland are more cooler.
Inland absorbs and releases heat energy more quickly than water, inland places typically experience higher temperature variations from day to night and from season to season, so that inland is hotter area also.
To know more about, Energy click here:
brainly.com/question/1932868
#SPJ4
write the reaction equation for the reversible chemical reaction that occurs when the indicator bromcresol
Reactions that are reversible have the ability to move both forward and backward. Reactants change into products in a reversible reaction, but products can also change back into reactants.
In actuality, the opposing reaction as well as the forward reaction will occur simultaneously. In some chemical reactions, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D. Only in one direction can irreversible chemical reactions take place. Reactants can transform into products, while products cannot transform back into reactants. Chemical reactions that can be reversed can happen both ways. The products can change back into the reactants, and the reactants can change back into the products.
Learn more about chemical :
brainly.com/question/70429
#SPJ4
2H₂(g) + O2(g) → 2H₂O(g)
How many liters of H₂ are required to form 5 moles of H₂O at STP?
Answer:
The answer is 21.5 L
Explanation:
Determine the electron geometry (eg) and molecular geometry (mg) of NCl3.
O eg=tetrahedral, mg=trigonal pyramidal
O eg=linear, mg=trigonal planar
O eg=tetrahedral, mg=tetrahedral
O eg=linear, mg=linear
O eg=trigonal planar, mg=bent
The correct answer is : Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons
O eg=tetrahedral, mg=trigonal pyramidal
The electron geometry (eg) of NCl3 is determined by the positions of the electrons around the central atom, nitrogen (N). NCl3 has one lone pair of electrons on nitrogen and three bonding pairs of electrons with chlorine atoms, so the electron geometry is tetrahedral. NCl3's molecular geometry (mg) is determined by the atom positions in the molecule. In a trigonal pyramidal shape, NCl3 has one nitrogen atom in the centre and three chlorine atoms surrounding it. Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons. Electron geometry, also known as electron pair geometry, is the arrangement of electron pairs in a molecule or ion around a central atom. It is determined by the number of electron pairs surrounding the central atom, which includes both bonding pairs and lone electron pairs. The electron geometry can be used to predict the overall shape of a molecule or ion and also helps to understand the polarity of the molecule.
To learn more about electron geometry here:
https://brainly.com/question/7558603
#SPJ4
Carefully feel the sides of the flask. Is the crystallization of sodium acetate endothermic or exothermic? How do you know?
Answer:
It is not possible to determine whether the crystallization of sodium acetate is endothermic or exothermic simply by feeling the sides of the flask. To determine the heat of crystallization, you would need to measure the temperature of the solution before and after crystallization and compare the two values.
The heat of crystallization is defined as the heat absorbed or released during the process of crystal formation from a solution or a melt. If heat is absorbed during the process, the reaction is endothermic and the temperature of the solution or melt will decrease. If heat is released, the reaction is exothermic and the temperature will increase.
In the case of sodium acetate, it is an exothermic reaction, meaning that heat is released during crystallization and the temperature of the solution will increase. This is because the process of forming the crystal lattice requires the breaking of hydrogen bonds and other intermolecular forces, which releases energy.
Explanation:
Answer:
exothermic
Explanation:
When you crystallize the solution, sodium acetate forms a new bond from the soluble aqueous state ( Na+ and C2H3O2- ) to the solid state (NaC2H3O2). Forming bonds in chemistry is generally an exothermic reaction.
Select the proper IUPAC name for the following compound, including the (R) or (S) designation where appropriate. (2R, 3S)-2.3-difluorohexane (2S, 3R)-2, 3-difluorohexane (2R, 3R)-2, 3-difluorohexane (2S, 3S)-2, 3-difluorohexane
The proper IUPAC name for the compound is (2R,3S)-2,3-difluorohexane.
It is determined by following the IUPAC nomenclature rules for organic compounds. The key points for this are:
Parent Chain: The parent chain is a hexane, which is a six-carbon chain.Position of Substituents: A first substituent is a fluoro group that is on the second carbon of the parent chain, and a second substituent is a fluoro group that is on the third carbon of the parent chain. We use the prefix di- to indicate that there are two substituents.Absolute Configuration: The compound is a chiral compound, meaning that it has non-superimposable mirror images. To indicate the absolute configuration, we assign the priority of the substituents based on the atomic number of the atom directly bonded to the carbon atom of the substituent. The prefix (2R,3S) indicates that the substituent on the second carbon is in the R configuration and the substituent on the third carbon is in the S configuration.Final IUPAC Name: The proper IUPAC name of the compound is (2R,3S)-2,3-difluorohexane.Learn more about IUPAC nomenclature here:
https://brainly.com/question/28872356
#SPJ4
What process makes 2 ATP?
Anaerobic respiration results in the production of 2 ATP molecules.
What is anaerobic respiration?Anaerobic respiration is the use of electron acceptors other than molecular oxygen in respiration. Despite the fact that oxygen is not the ultimate electron acceptor, the process employs a respiratory electron transport chain. When there is insufficient oxygen for some species to respire, they still require energy to survive. Due to a lack of oxygen, they respire in the absence of oxygen to create the energy they require, which is known as anaerobic respiration. While most aerobic respiration (with oxygen) occurs in the cell's mitochondria, anaerobic respiration (without oxygen) occurs in the cytoplasm.
Here,
Two ATP molecules are created during anaerobic respiration.
To know more about anaerobic respiration,
https://brainly.com/question/12605249
#SPJ4
The_____gene shows up even when inherited only from one parent.
Answer:
The Alleles gene shows up even when inherited only from one parent
Explanation:
The two alleles in a gene pair are inherited, one from each parent. Alleles interact with each other in different ways. These are called inheritance patterns.
i hope this helped
Determine whether each of the following compounds is a molecular compound or an ionic compound. How can you tell?
a. ) PBr₃
b. ) KBr
c. ) Iron (III) Oxide
d. ) Carbon Tetraiodide
PBr₃ and Carbon Tetraiodide is a covalent compound. Whereas, KBr and Iron (III) Oxide is an ionic compound.
Covalent compounds and molecular compounds are those compound where two non-metals, or a non-metal are bonded to each other through the sharing pair of electrons.
PBr₃ are covalent because phosphorous is in the column 3 in periodic system and it has three valence electrons in its outer shell. Therefore, in case of Carbon Tetraiodide carbon and iodide both are non-metals that why they are covalent compounds.
KBr and Iron (III) Oxide both are Iron (III) Oxide because they are formed by the interaction between a metal and non-metal. They will transfer the electrons from positively to negatively charged atoms.
To know more about covalent compound here
https://brainly.com/question/11632372
#SPJ4
Potassium Permanganate is used for purifying drinking water, because
A. it is a sterilising agent
B. it dissolves the impurities of water
C. it is a reducing agent
D. it is an oxidising agent
Answer:
D. it is an oxidizing agent
Explanation:
If the mass of the products (AlCl3 and Cu) are 146g total and the mass of CuCl2 on the reactant side is 126 grams, what is the mass of Al
Your limiting reagent will be copper (II) chloride. The mole ratio is the most crucial tool you'll have to tackle this problem, or any other stoichiometry problem, for that matter.
Keep in mind that in order to make 3 moles of copper from 3 moles of copper (II) chloride, you need 2 moles of aluminum. Unbalanced reaction: Al(s)+HCl(aq) AlCl3(aq)+H2(g). Cl. Balance On the product side there are three Cl atoms and on the reactant side there is one. There is only one hydrogen atom on the reactant side and two on the product side of the reaction Mg + HCl MgCl 2 + H 2. The equation is therefore unbalanced.
Learn more about reagent here-
https://brainly.com/question/28196410
#SPJ4
How many moles are there in 10g?
Answer:
0.25 moles
Explanation:
For the reaction H2(g) + Cl2(g) 2HCl(g), Kc = 1.22 1033 at a temperature of 301 K. What is Kp at this temperature? A) 1.22 1033 B) 3.01 1034 C) 4.93 1031 D) 7.43 1035 E) 2.00 1030
The reaction would have a Kp of 3.01 * 10^34. Option B
What is the Kp of the reaction?We know that the equilibrium constant of the reaction is the value that would be able to show us how much of the reactants that have been converted to products when the reaction has attained the point of equilibrium at a given temperature.
As such we would have that;
Kp= Kc (RT)^Δn
Kp = ?
Kc = 1.22 * 10^ 33
R = 0.082
T = 301 K
Then we have that;
Kp = 1.22 * 10^ 33(0.082 * 301)^ 1
Kp = 3.01 * 10^34
Learn more about Kp:https://brainly.com/question/22074421
#SPJ1
2.278 x 10^-4 mol of an unidentified gaseous substance effuses through a tiny hole in 95.70 s. Under identical conditions, 1.738 x 10 ^-4 mol of argon gas takes 81.60 s to effuse. What is the molar mass of the unidentified substance
The unnamed material has a molar mass of 32 grammes per mole, and it exhales 2.278 x 10-4 molecules of an unknown gas through a minute hole in 95.70 seconds.
It takes 81.60 s for 1.738 x 10 -4 mol of argon gas to effuse under the same circumstances. The definition of molar mass is the mass in grammes of a mole of a specific chemical. The term "mole" refers to any material or compound that includes the Na number of atoms, molecules, or ions, where Na is the Avogadros number and Na = 6.023 1023. A molecule's total atomic mass expressed in grammes per mole is known as its molar mass. to figure out a molecule's molar mass
R1/R2 equals (M2/M1)1/2 2.38*10-6/2.1299*10-6 = sqrt(40/M1).
40 M1/M1 = 1.25 M2/M2 = 32 gm/mole
Learn more about molar mass here
https://brainly.com/question/12127540
#SPJ4
how many grams of KNO3 that should be placed in the airbag to fully react with the Na.
10 Na + 2KNO3 > 1K20 + 5Na2O + 1 N2 (g)
At 161 K, SiH4 boils but SiO2 remains as a solid. Using principles of interparticle forces, explain the difference in boiling points.
The boiling point of a substance is determined by the strength of the interparticle forces between molecules.
What is boiling point?Boiling point is the temperature at which a liquid changes state from liquid to gas, also known as its vaporization point. The boiling point of water at sea level is 100°C (212°F).
In the case of SiH4, the boiling point is higher than that of SiO2 due to the stronger nature of the intermolecular forces. This is because SiH4 is held together by stronger hydrogen bonds, resulting in more energy needed to break apart the molecules. On the other hand, SiO2 is held together by weaker dipole-dipole interactions and London dispersion forces, meaning it requires less energy to break apart the molecules and thus has a lower boiling point.
To learn more about boiling point
https://brainly.com/question/14008526
#SPJ4