what is molar mass of kclo3 ?

The order of  the solvents according to their polarities, from the most polar to nonpolar are :

water > ethanol > acetone > ethyl acetate > hexane

The water is the most polar compound as the water has the two polar end and the shape of the water molecule is bent shape. Th water molecule has the net dipole moment. The ethanol will be than water as the ethanol contains the non polar alkyl group. The alcohols are polar than that of ketone because alcohol form the hydrogen bond. The carbonyl are more polar than the ester.

The hexane is the nonpolar compound because it does not have any of the polar bond present in it.

To learn more about polar here

https://brainly.com/question/30513173

#SPJ4

One mole of acetic anhydride reacts with one mole of salicylic acid to give one mole of aspirin. Then, 9.8 g of salicylic acid will give 12.7 g of aspirin.

Aspirin is used as an analgesic in medicines. It is acetyl salicylic acid formed by the reaction of salicylic acid and acetyl anhydride.

The theoretical yield of a reaction is  determine from the balanced chemical equation of the reaction. The actual yield might be lower than  the theoretical yield.

One mole of salicylic acid reacts to give one mole of the product aspirin.

molar mass of salicylic acid  = 138.12 g/mol

molar mass of aspirin = 180.16 g/mol

then mass of aspirin produced from 9.8 g of salicylic acid is :

(9.8 × 180.16)/138.12 = 12.7 g.

Therefore, the theoretical yield of the reaction is 12.7 g.

Find more on theoretical yield :

https://brainly.com/question/2506978

#SPJ1

The tiny unit of an element that retains the properties of the element is called an "atom".

An atom is the basic unit of matter that retains the chemical properties of an element. It is the smallest particle of an element that can participate in a chemical reaction. Atoms are composed of a positively charged nucleus made up of protons and neutrons, surrounded by negatively charged electrons in shells or orbitals.

The number of protons in an atom's nucleus determines its atomic number and thus its identity as a particular element. Atoms can combine with other atoms to form molecules through chemical bonds.

To know more about atom here

https://brainly.com/question/13654549

#SPJ4

BCl₃ has covalent bonds.

BCl₃ is a compound composed of one boron atom and three chlorine atoms. In this molecule, each atom shares electrons with the other atoms to form covalent bonds. A covalent bond is a type of chemical bond formed by the sharing of electrons between two or more atoms.

In BCl3, the boron atom shares three of its valence electrons with three chlorine atoms, forming three covalent bonds. Each chlorine atom shares one of its valence electrons with the boron atom, completing the octet and forming a stable molecule. Therefore, BCl₃ is a covalent molecule with covalent bonds between boron and chlorine atoms.

To know more about the covalent bonds, here

brainly.com/question/19382448

#SPJ4

Answer:

e

Explanation:

because it loses a proton stop being magnetic

No. Adding NaOH did not change the identity of the NaCl. (option b). When NaOH (sodium hydroxide) is added to an aqueous solution of NaCl (sodium chloride), a chemical reaction occurs, which is called a neutralization reaction.

This reaction forms NaCl (sodium chloride) and H2O (water) as the end products. The chemical equation for this reaction can be represented as follows:

As we can see from this equation, NaCl is not changed and remains in its original form, only the OH- ions from NaOH react with the H+ ions from HCl to form water. Therefore, the identity of NaCl remains unchanged even after the addition of NaOH solution.

Learn more about Aqueous Solution:

https://brainly.com/question/19587902

#SPJ4

Sodium chloride is a compound which does not  have a covalent structure.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ9

An excess reactant is a reactant that is present in a greater amount than is required to completely react with the other reactants.

Organic chemistry is the study of chemical compounds that contain carbon. It is a branch of chemistry that focuses on the structure, properties, and reactions of organic molecules.

An organic molecule is a molecule that contains carbon atoms bonded to hydrogen atoms, along with other elements such as oxygen, nitrogen, and sulfur. Organic chemistry is important in many fields, including medicine, agriculture, and materials science.

In a chemical reaction, a reactant is a substance that is consumed in the reaction to form the products. This means that there will be some of the excess reactant left over after the reaction is complete. The amount of product formed in a reaction is determined by the amount of the limiting reactant, which is the reactant that is consumed completely in the reaction.

Therefore, it is important to know the amount of excess reactant in a reaction in order to predict the amount of product that will be formed.

To more about Organic chemistry here:

https://brainly.com/question/14623424#

#SPJ11

When drawing a Fischer projection of a sugar, the aldehyde or ketone functional group is usually placed at the top of the vertical line. This is because Fischer projections are usually drawn for carbohydrates in their open-chain form, which contains a carbonyl group (aldehyde or ketone). The aldehyde or ketone group is placed at the top of the vertical line, and the carbon chain is then drawn extending downwards.

If the sugar is a aldose (a sugar with an aldehyde group), the aldehyde group is placed at the top of the vertical line. If it is a ketose (a sugar with a ketone group), the ketone group is placed at the top of the vertical line. The hydroxyl groups (-OH) are then placed on the horizontal lines, either projecting towards or away from the viewer, depending on their stereochemistry.

To learn more about Fischer projection refer to:

brainly.com/question/29615238

#SPJ4

The given statement is true. The rate limiting step in a reaction is the slowest step in the reaction sequence.

In chemical kinetics, the slowest step, sometimes referred to as the rate-determining step or rate-limiting step, frequently roughly determines the total pace of a reaction.

The reaction's slowest step is used to generate the rate equation. Writing rate equals the rate constant of the slowest step times the concentrations of the reactant or reactants raised to their reaction order is how you build up a rate equation.

2A + B → C + D using the following two stages, the first step is referred to as the rate-determining step of the reaction since the total rate of the reaction is equal to the rate of the slow first step. The rate of the reaction in the aforementioned equation depends on the rate constant k.

Learn more about rate limiting step here brainly.com/question/14923179

#SPJ4

Hydrogen chloride  HCl has a molecular weight of 36.458.

HCl has a molecular weight of 1.008 plus 35.45.

To find the molecular weight of HCl (hydrogen chloride), you need to know the atomic masses of hydrogen (H) and chlorine (Cl), and then sum them up according to the chemical formula of HCl.

The atomic mass of hydrogen is approximately 1.008, and the atomic mass of chlorine is approximately 35.45. The molecular formula of HCl is H1Cl1, which means it contains one atom of hydrogen and one atom of chlorine.

To find the molecular weight of HCl, you can add the atomic masses of hydrogen and chlorine:

1) Molecular weight of HCl = Atomic mass of hydrogen + Atomic mass of chlorine

2) Molecular weight of HCl = 1.008 + 35.45

3) Molecular weight of HCl = 36.458

The molecular weight of HCl is approximately 36.458 g/mol.

To learn more about  Hydrogen chloride :

https://brainly.com/question/19053776

#SPJ4

According the question, the first reaction is a decomposition reaction,

The second is a synthesis reaction, the third is a decomposition reaction, and the fourth is a decomposition reaction.

A breakdown reaction is what a synthesis method is not. During a decomposition process, a single component splits apart into two or more distinct components or compounds.

When two or even more straightforward compounds combine to produce a more complicated outcome, this is referred to as a synthesis in chemical terms. In a decomposition reaction, a type of chemical reaction, one reactant yields two or more products.

In contrast to synthesis, which involves creating new chemical bonds among reactants to create new products, decomposition is the action of rupturing chemical bonds among reactants to produce a variety of products.

To know more about decomposition process visit:

brainly.com/question/27746877

#SPJ1

Answer:

Explanation:

The pH of a solution that contains 11.7 g of NaCl for every 200 mL of solution cannot be determined from the information provided. The pH of a solution depends on the concentration of hydrogen ions (H+) present in the solution. The presence of NaCl in the solution does not directly affect the pH of the solution.

NaCl is a neutral salt, meaning it does not affect the pH of a solution when it is dissolved in water. In order to determine the pH of the solution, we would need to know the concentration of hydrogen ions (H+) in the solution.

The Great Gatsby symbolize the hope, optimism, and the dreams. The green light is the prominent symbol of the hope in The Great Gatsby.

The Great Gatsby hope, the optimism, and the dreams. The green light is the  prominent symbol of the hope in The Great Gatsby. When the Gatsby first met the Daisy, he was noticed that the green light that was in  the dock by the her house. The green light is the symbol of the hope.

The Nick connects the Gatsby's American Dream of the winning Daisy's that love to the American Dream of the first of the settlers coming to the America.

To learn more about gatsby here

https://brainly.com/question/29775350

#SPJ4

With respect to earths climate system at the proposed strategy of dimming the sun would be an example of climate forcing.

Climate is the long-term weather pattern in a region, typically averaged over 30 years. More rigorously, it is the mean and variability of meteorological variables over a time spanning from months to millions of years.

Some of the meteorological variables that are commonly measured are temperature, humidity, atmospheric pressure, wind, and precipitation. In a broader sense, climate is the state of the components of the climate system, including the atmosphere, hydrosphere, cryosphere, lithosphere and biosphere and the interactions between them. The climate of a location is affected by its latitude, longitude, terrain, altitude, land use and nearby water bodies and their currents.

Learn more about climate,here:

https://brainly.com/question/10440860

#SPJ1

The number of atoms in 3 moles K of the particle is 1.806 x 10²⁴ atoms.

The value of one mole of an atom is equal to exactly 12 grams of pure carbon-12.

12.00 g (C-12 ) = 1 mol C-12 atoms = 6.02 × 10²³ atoms .

The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 10²³).

The number of atoms in 3 moles K of the particle is calculated as follows;

= 3 moles  x   6.02 × 10²³ atoms / mol

= 1.806 x 10²⁴ atoms

Learn more about number of atoms here: https://brainly.com/question/6258301

#SPJ1

The group 18 in the periodic table is the noble gases. The elements are The elements are helium , neon , argon, krypton, xenon, radon, and oganesson.

The group 18 group belongs to the noble gases in the periodic table and the elements belongs to the group 18 is as follows :

The Group 18 is also called as the zero group because the  elements belongs to this group have the zero valency or the tendency to react with other elements also is zero. That means they are chemically unreactive and they are the most stable elements in the periodic table.

To learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

When naming ionic compounds, there are several rules that should be followed. Here are three important rules to remember:

1) Use the name of the cation first

2) Use the correct suffix for the anion

3) Use Roman numerals to indicate the charge of the cation

1) Use the name of the cation first: In an ionic compound, the name of the cation comes first, followed by the name of the anion. For example, in the compound NaCl, the cation is sodium and the anion is chloride.

2) Use the correct suffix for the anion: The suffix for the anion depends on its charge. For example, if the anion has a single negative charge, the suffix is "-ide". So, chloride becomes chloride ion (Cl-) and sulfide becomes sulfide ion (S2-).

3) Use Roman numerals to indicate the charge of the cation: If the cation can have multiple charges, the charge must be specified using a Roman numeral in parentheses. For example, iron (III)  chloride (FeCl3) indicates that the iron cation has a +3 charge. The Roman numeral is equal to the charge of the cation.

To learn more about  ionic  compounds :

https://brainly.com/question/3222171

#SPJ4

In a 0. 175 mol kg-1 kf solution, 347 g of water contains 6.07 x 10-2 moles of kf.

What is the definition of "molality"?

Its molality (m), often called molal concentration, is the amount of a substance dissolved in a mass of solvent. It is defined as the moles of a solute per kilogramme of a solvent. The term "molarity," which describes the molar concentration of a solution, is the root of the word "molality."

The mole is the volume of a system that contains 0.012 kilos of carbon 12 and the same number of atoms as there are elementary particles.

Water, m1, has a mass of 347g.

M's molality is 0.175 mol/kg.

Since 1 ml of water has a mass of 1 gramme, 347 g of water is equivalent to 347 ml, or 0.347 L.

As a result, KF is equal to 0.17 * 0.347, or 6.07 x 10-2.

Learn more about molality here :

brainly.com/question/1370684

#SPJ4

The molality of hexane in the solution is 7.32 mol/L. This can be calculated by dividing the mass of hexane by the mass of the solvent, which is octane.

To find the molality, we first need to find the number of moles of hexane in the solution. This can be done by dividing the mass of hexane (180.3 g) by its molecular weight (86.18 g/mol), resulting in a value of 2.09 moles. Next, we need to find the mass of the solvent, which is octane (200.0 g). To convert the mass of the solvent to its equivalent in liters, we use the density of octane, which is approximately 0.703 g/mL at 25°C.

Dividing the mass of octane by its density gives us a volume of 284.9 mL, which is equivalent to 0.2849 L. Finally, the molality can be found by dividing the number of moles of hexane by the volume of the solvent in liters:

2.09 moles ÷ 0.2849 L = 7.32 mol/L.

Learn more about Hexane:

https://brainly.com/question/9630611

#SPJ4

If nacl solution is prepared by dissolving 90.0 g nacl in 250.0 g of water at 25°c.  The vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr . the closest  is option  A. 21.21 torr

To calculate the vapor pressure of the solution, we need to use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution. The equation for Raoult's law is:

P = X_solvent * P°_solvent

where:

P is the vapor pressure of the solution,

X_solvent is the mole fraction of the solvent (in this case, water),

P°_solvent is the vapor pressure of the pure solvent (in this case, water).

We can first calculate the mole fraction of water in the solution as follows:

Moles of water = mass of water / molar mass of water

= 250.0 g / 18.015 g/mol

= 13.87 mol

Moles of NaCl = mass of NaCl / molar mass of NaCl

= 90.0 g / 58.44 g/mol

= 1.539 mol

Total moles = moles of water + moles of NaCl

= 13.87 mol + 1.539 mol

= 15.41 mol

The mole fraction of water is then:

X_water = moles of water / total moles

= 13.87 mol / 15.41 mol

= 0.899

Using Raoult's law and the given vapor pressure of water at 25°C (P°_water = 23.56 torr), we can calculate the vapor pressure of the solution as:

P = X_water * P°_water

= 0.899 * 23.56 torr

= 21.14 torr

Therefore, the vapor pressure of the solution is 21.14 torr, which is closest to option A, 21.21 torr.

Learn more about vapour pressure here:

https://brainly.com/question/2693029

#SPJ4

The effective nuclear charge (Zeff) experienced by the 1s and 2s electrons of the Sulfur atom (S) is 16, 14. Option D is correct answer.

The effective nuclear charge (Zeff) = Z – S, where Z is the atomic number and S is the number of shielding electrons.

S has 16 protons and its 1s electrons are shielded only by the 0 electrons, therefore they experience an effective nuclear charge,

Zeff = 16 − 0 = 16.

S has 16 protons and its 2s electrons are shielded only by the two 1s electrons, therefore they experience an effective nuclear charge,

Zeff = 16 − 2 = 14.

To know more about the nuclear charge, here

brainly.com/question/29977062

#SPJ4

Anticholinesterases will increase the usual time of acetylcholine in the synapse. Rebinding can then connect the transmitter to nicotinic receptors. It allows acetylcholine the stronger advantage over the neuromuscular blocking agent.

The decomposition reaction of phosphorus tetra oxide (P₂O₄) is as follows:

4 P₄O₆ ⇒ P₄ + 6 P₂O₄

A decomposition reaction is a reaction in which a compound terminates  into two or more simpler substances.

The general form of a decomposition reaction is: AB→A+B. Most decomposition reactions involve an input of energy in the form of heat, light, or electricity.

4 P₄O₆ ⇒ P₄ + 6 P₂O₄ this is an example of decomposition reaction of phosphorus oxide.

Thus, The decomposition reaction of phosphorus tetra oxide (P₂O₄) is 4 P₄O₆ ⇒ P₄ + 6 P₂O₄

To learn more about the decomposition reaction, follow the link;

https://brainly.com/question/16987748

#SPJ9

The molarity of C29H60 in summer rainwater collected in Hannover, Germany, is 0.000034 M, or 34 nM.

To convert from parts per billion (ppb) to molarity, we need to know the number of moles of C29H60 present in a given volume of rainwater. We can use the concentration in ppb and the volume of the rainwater to calculate the number of moles of C29H60.

Rearranging this equation, we can calculate the number of moles of solute:

Since 1 ppb is equal to 1 g/L, the number of moles can also be calculated using the mass of C29H60 and its molecular weight:

The molarity of the solution is then given by:

We can now convert this molarity to nano molarity (nM) by multiplying by 10^9:

So the molarity of C29H60 in summer rainwater collected in Hannover, Germany, is 0.000034 M, or 34 nM.

Learn more about Molarity:

https://brainly.com/question/17138838

#SPJ4

The actual volume of water measured out is 10.012 mL.

To determine the actual volume of water, we can use the density formula: density = mass/volume.

Rearranging the formula to solve for volume, we get: volume = mass/density.

Plugging in the given values, we get:

volume = 9.990 g / 0.9978 g/mL = 10.012 mL.

Therefore, the actual volume measured out is slightly greater than the nominal volume of 10 mL, likely due to the meniscus formed by the water at the top of the pipet. This highlights the importance of proper measurement techniques and accounting for sources of error in experimental measurements.

You can learn more about volume of water at

https://brainly.com/question/4895505

#SPJ4

Answer:

30.5 Hz

Explanation:

Speed of sound = wavelength x frequency
                       61 = 2m x Frequency(Hz)

                       
Frequency = 61/2
                  = 30.5 Hz

Hope it helps ;)

Answer:

160 g

Explanation:

The balanced chemical equation is:

S2 + 2O2 → 2SO2

From the equation, we can see that for every 2 moles of O2 used, we produce 2 moles of SO2.

Therefore, for 1 mole of O2 used, we produce 1 mole of SO2.

To find the number of grams of SO2 produced, we need to know the molar mass of SO2, which is approximately 64.06 g/mol.

So, to calculate the mass of SO2 produced from 2.5 moles of O2, we can use the following conversion:

2.5 moles O2 x (2 moles SO2/2 moles O2) x (64.06 g SO2/1 mole SO2) = 160.38 g SO2

Therefore, 160.38 grams of SO2 can be produced if 2.5 moles of O2 are used.

The buffer solution definition of the chemistry is the solution that usually containing the acid and the base, or the salt, that tends to maintain the constant hydrogen ion concentration.

The buffer solution is the acid or the base of the aqueous solution consisting of the mixture of the weak acid and its conjugate base, or the vice versa. Its resist the pH change when the small amount of the strong acid or the base is added to it.

This types of the solution of the reserve acidity or the alkalinity which will resists the change of the pH of the solution upon the addition of the small amount of the acid or the alkali.

To learn more about buffer solution here

https://brainly.com/question/24262133

#SPJ4