what is the area of the parallelogram​

Answer:

Step-by-step explanation:

Let h be the height of the trapezoid.

The area of a trapezoid is given by the formula:

Area = (1/2) × (sum of parallel sides) × (height)

In this case, we know that the area is 21 cm², one base length is 5 cm, and the other base length is 9 cm. So we can write:

21 = (1/2) × (5 + 9) × h

Simplifying this equation, we get:

21 = 7h

Dividing both sides by 7, we get:

h = 3

Therefore, the height of the trapezoid is 3 cm.

Answer:

Step-by-step explanation:

Area of Trapezium is 21 cm². Parallel sides are 5 cm and 9 cm .

Shorter parallel side is 5 cm and the Longer Side is 9 cm.

As we know that formula of area of Trapezium is,

Where,

On substituting the values of area and the two parallel sides in the above formula we will get the required Height.

Substituting the values,

21 = ½ (5 + 9)h

21 = ½ × 14 × h

21 = 7 × h

h = 21/7

h = 3 cm

Therefore, Height of the Trapezium will be 3 cm respectively.

The volume of the solid is 2160ft^3

Volume of Cuboid is the multiplication of length breath and height.

We know that, Volume of Cuboid = l×b×h

put the given values from figure,

= 12×10×15

=1800ft^3

Volume of top = Area of triangle × length

= 1/2 × 4× 12× 15

=360ft^3

Total volume= 1800 + 360

= 2160ft^3

Therefore, the volume of the solid is 2160ft^3

To know more about Cuboid, visit:

https://brainly.in/question/835104

#SPJ1

Cuboid: According to the question the volume of the solid is [tex]2160ft^3[/tex].

A cuboid is a three-dimensional geometric shape which is composed of six rectangular faces. It has 12 edges and 8 vertices. It is also referred to as a rectangular prism. The three dimensions of a cuboid are its length, width, and height. The cuboid is a versatile shape that can be used in many different ways and can be seen in everyday objects such as boxes, desks, and bookshelves. It is also a common shape for mathematically-based problems such as calculating the volume of a cuboid.

We know that, Volume of Cuboid = l×b×h
put the given values from figure,
= 12×10×15
=[tex]1800ft^3[/tex]
Volume of top = Area of triangle × length
= 1/2 × 4× 12× 15
=[tex]360ft^3[/tex]
Total volume= 1800 + 360
= [tex]2160ft^3[/tex]
Therefore, the volume of the solid is [tex]2160ft^3[/tex]

To know more about Cuboid, visit:
https://brainly.com/question/29568631
#SPJ1

(a) The possible choices are (1,3), (1,5), and (3,5), and the maximum of each pair is 3, 5, and 5, respectively.

(b) Since each pair has probability 1/3 of being chosen, the probability mass function for X is P(X=3) = 1/3 and P(X=5) = 2/3.

(c) The expectation of X is E(X) = 3(1/3) + 5(2/3) = 4.

(d) The variance of X can be calculated as Var(X) = E(X^2) - (E(X))^2 = (3^2)(1/3) + (5^2)(2/3) - 4^2 = 2/3.

(a) We can list all the possible choices of two integers from the set {1,3,5}: (1,3), (1,5), and (3,5). For each choice, we can determine the maximum of the two integers. These maximums are 3, 5, and 5, respectively.

(b) Since each pair has an equal probability of being chosen, the probability mass function for X can be calculated as the probability of getting 3 or 5. There is only one pair that results in X=3, which is (1,3). There are two pairs that result in X=5, which are (1,5) and (3,5). Thus, P(X=3) = 1/3 and P(X=5) = 2/3.

(c) To find the expectation of X, we multiply each possible value of X by its corresponding probability and sum the results. Thus, E(X) = 3(1/3) + 5(2/3) = 4.

(d) The variance of X can be calculated using the formula Var(X) = E(X^2) - (E(X))^2. We can calculate E(X^2) by multiplying each possible value of X squared by its corresponding probability and summing the results. Thus, E(X^2) = (3^2)(1/3) + (5^2)(2/3) = 16/3. Substituting E(X) = 4 and E(X^2) = 16/3 into the formula for variance gives Var(X) = 2/3.

For more questions like Probability click the link below:

https://brainly.com/question/30034780

#SPJ11

The number 10 is 30% of the following number: 33.33.

In Mathematics, a percentage can be defined as any number that is expressed as a fraction of hundred (100). This ultimately implies that, a percentage indicates the hundredth parts of any given number.

In order to determine the whole number which 10 is 30%, we would apply the following mathematical expression (formula);

Quantity = percent × number

Substituting the given parameters into the percentage and quantity formula, we have the following;

10 = 30/100 × number

10 = 0.3  × number

Number = 10/0.3

Number = 33.33.

Read more on percentage here: brainly.com/question/28009735

#SPJ1

Answer:

A) k = 0.037

B) 186°F

Step-by-step explanation:

List initial (T₀) and air (Tₐ) temperature

[tex]T_0=280^\circ\\T_a=67^\circ\\[/tex]

Part A

[tex]T=T_a+(T_0-T_a)e^{-kt}\\193^\circ=67^\circ+(208^\circ-67^\circ)e^{-k(3)}\\193=67+141e^{-3k}\\126=141e^{-3k}\\\frac{126}{141}=e^{-3k}\\\ln(\frac{126}{141})=-3k\\-\frac{1}{3}\ln(\frac{126}{141})=k\\k\approx0.037[/tex]

Part B

[tex]T=T_a+(T_0-T_a)e^{-kt}\\T=67+(208-67)e^{-0.037(4.5)}\\T\approx186^\circ\text{F}[/tex]

999 divided by 42 is equal to 23 with a remainder of 33.

What is division?

Division is a basic arithmetic operation that involves splitting a number into equal parts or groups. It is the inverse operation of multiplication, and is used to find out how many times one number (the divisor) can be divided into another number (the dividend) without leaving a remainder. The result of division is called the quotient.

To simplify the division of 999 by 42, we can use the fact that 42 is a divisor of 84, which is a multiple of 42. We can write:

999 ÷ 42 = (42 × 23) + 33

= 966 + 33

= 999

Therefore, 999 divided by 42 is equal to 23 with a remainder of 33, or in other words, 999 ÷ 42 = 23 33/42.

To learn more about division visit:

https://brainly.com/question/25289437

#SPJ1

W satisfies all the three conditions of being a subspace of V. So, W is a subspace of V.

W is the set of all 3 x 2 matrices of the form [a,b; (a + b),0; 0,c]. It needs to be verified that W is a subspace of V, which has standard operations. Let us check whether W satisfies the three conditions to be a subspace of V or not:

Closure under addition: If X, Y are any two elements of W, then X + Y is also in

W.[a₁, b₁; (a₁ + b₁), 0; 0,c₁] + [a₂, b₂; (a₂ + b₂), 0; 0,c₂] = [a₁ + a₂, b₁ + b₂; (a₁ + b₁ + a₂ + b₂), 0; 0,c₁ + c₂]

The resulting matrix has the same form as W. So, W is closed under addition.

Closure under scalar multiplication: If X is any element of W and k is any scalar, then k

X is also in W.k[a, b; (a + b), 0; 0,c] = [ka, kb; k(a + b), 0; 0,kc]

This is of the same form as W. So, W is closed under scalar multiplication.

Contains zero vector: The zero vector is [0,0; 0,0; 0,0], which is of the same form as W. So, W contains the zero vector.

Therefore, W satisfies all the three conditions of being a subspace of V. So, W is a subspace of V.

To know more about subspace: https://brainly.com/question/29891018

#SPJ11

The probability that a randomly selected component is shorter than 7 inches long is approximately 25.14%.

We are given that the lengths of components produced by the automatic press are normally distributed with a mean of 8 inches and a standard deviation of 1.5 inches.

We need to find the probability that a randomly selected component is shorter than 7 inches long.

We can use the standard normal distribution to find this probability. We first need to convert the length of 7 inches to a z-score:

z = (7 - 8) / 1.5 = -0.67

Using a standard normal distribution table or calculator, we can find the area to the left of this z-score, which represents the probability that a randomly selected component is shorter than 7 inches long:

P(z < -0.67) = 0.2514

Learn more about probability here: https://brainly.com/question/24756209

#SPJ1

A graph that matches the equation include the following: A. graph A.

In Mathematics and Geometry, the point-slope form of a straight line can be determined by using this mathematical equation:

y - y₁ = m(x - x₁)

Where:

Based on the information provided about the equation of this line, we can logically deduce the following parameters;

y + 6 = 3/4(x + 4)

y = 3x/4 + 3 - 6

y = 3x/4 - 3

Therefore, the slope, m is equal to 3/4 while the y-intercept is at point (0, 3).

Read more on slope and equation here: https://brainly.com/question/13015874

#SPJ1

Viola needs to jump a distance of 0.04 m on her next attempt to increase her mean to 3.82 m

On average, she has jumped 3.80 m so far. Therefore, the sum of distances jumped so far by her is:

3.80 m × the total number of jumps taken so far.

On the next jump, she reaches 3.99 m. Therefore, after the next jump, the total distance jumped so far by her will be 3.80 m × total number of jumps taken so far + 3.99 m. The new mean is 3.81 m.

Therefore, (3.80 m × total number of jumps taken so far + 3.99 m)/(total number of jumps taken so far + 1) = 3.81.

The above equation can be simplified as 3.80 m × total number of jumps taken so far + 3.99 m = 3.81 m × (total number of jumps taken so far + 1).

This simplifies to 3.80 m × total number of jumps taken so far + 3.99 m = 3.81 m × total number of jumps taken so far + 3.81 m. Now, we need to solve the above equation to find out the distance she needs to jump on her next attempt to increase her mean to 3.82 m.

3.80 m × total number of jumps taken so far + 3.99 m = 3.81 m × total number of jumps taken so far + 3.81 m.

0.01 m = 0.01 m × total number of jumps taken so far.

1 = total number of jumps taken so far. Now, she needs to jump a distance of (3.82 m × (total number of jumps taken so far + 1)) - (3.80 m × total number of jumps taken so far)

= (3.82 m × (1 + 1)) - (3.80 m × 1)

= 3.82 m × 2 - 3.80 m

= 0.04 m

Therefore, she needs to jump a distance of 0.04 m on her next attempt to increase her mean to 3.82 m.

To learn more about mean and distance refer :

https://brainly.com/question/28448081

#SPJ11

a) Option A, A x2 statistic provides strong evidence in favor alternative hypothesis if its value is a large positive number.

b) Option B, The null hypothesis that sex and personal goals are not related vs. the alternative hypothesis that sex and personal goals are related.

c) Option B, The variables considered in a chi-squared test used to evaluate a contingency table B. are categorical.

(a) A x2 statistic provides strong evidence in favor of the alternative hypothesis if its value is a large positive number. The x2 statistic is used in hypothesis testing to determine whether there is a significant difference between observed and expected frequencies. A large positive value indicates that the observed frequencies are significantly different from the expected frequencies, which supports the alternative hypothesis.

(b) The hypotheses being tested in a chi-squared test on a contingency table are the null hypothesis that sex and personal goals are not related vs. the alternative hypothesis that sex and personal goals are related. This test determines whether there is a significant association between two categorical variables.

(c) The variables considered in a chi-squared test used to evaluate a contingency table are categorical. These variables cannot be averaged or assumed to be normally distributed. The chi-squared test is used to analyze the relationship between two or more categorical variables, where each variable has a discrete set of categories.

Learn more about statistics at

https://brainly.com/question/29093686

#SPJ4

A hexagon with two lines

hope helped you please make me brainalist and keep smiling dude

I hope you are form India

Answer:

12

Step-by-step explanation:

Given the ratio [tex]9:36[/tex], we can say that the ratio of driftwood is divided by 3 for the number of shells.

[tex]\frac{9}{3} =3\\\frac{36}{3}=12[/tex]

So, to fill the blank and create an equivalent ratio, you need to input 12.

Answer:

Step-by-step explanation:

You need to find the volume if one shoe box by doing:

Length x Width x Height

Of the shoe box

Then multiply by 30 to get the volume for all the shoe boxes

pls mark me brainliest

The correct order of steps is 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12.

To find the inverse of 55 modulo 89 using the Euclidean algorithm, the steps are:
1. 89 = 1.55 +34
2. 55 = 1.34 +21
3. 34 = 1.21 + 13
4. 21 = 1.13 + 8
5. 13 = 1.8 +5
6. 8 = 1.5 +3
7. 5 = 1.3 +2
8. 3 = 1.2 +1
9. 2 = 1.2
10. The Bézout coefficient of 55 is 34, and it is an inverse of 55 modulo 89.
11. The Bézout coefficients of 55 and 89 are 34 and -21, respectively.
12. The gcd in terms of 55 and 89 is written as 1 = 34-21.89 = 34-21. (55-1.34) = 13.34-21.55 = 13. (21-1.13) - 3.13 = 5.21-8. 13 = 5. (8-1.5) - 1.5 = 2.8-3.5 = 2. (3-1.2) = 2.3-1.5 = 2. (2-1) = 3-1.2 = 3-1. (1-0) = 34-21.89
The correct order of steps is 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12.

To learn more about order refer :

https://brainly.com/question/15245131

#SPJ11

The radius of a cylindrical pool when given the volume and height is √{(V / (πh))}.

Cheryl can rewrite the volume formula for a cylinder in terms of the radius.

The volume formula for a cylinder is: V = πr²h

Where V is the volume of the cylinder,

r is the radius of the cylinder,

h is the height of the cylinder.

To determine the radius of the cylindrical pool, we can rearrange the formula for the volume of a cylinder,

V = πr²h, to solve for r.

Starting with the formula for the volume of a cylinder:

V = πr²h

Divide both sides by πh:

V / (πh) = r²

Take the square root of both sides:

√{(V / (πh))} = r

Therefore, the formula to determine the radius of the pool given the volume V and height h is:

r = √{(V / (πh))}

To practice more questions about the volume of cylinder: https://brainly.com/question/9554871

#SPJ11

Dorris earns $12.25 in interest over 15 months, while Max earns $2.84 in interest over the same period. So, Dorris earns more interest than Max.

To find out who earns more interest in 15 months, we can calculate the interest earned by each person using the formula:

Interest = Principal x Rate x Time

For Dorris, we have:

Interest = $200 x 0.041 x (15/12)

Interest = $12.25

For Max, we have:

Interest = $300 x 0.019 x (15/12)

Interest = $2.84

Interest refers to the cost of borrowing money, usually expressed as a percentage of the amount borrowed over a specific period of time. When someone borrows money, they are required to pay back not only the amount borrowed but also an additional amount, which is the interest. Interest is how lenders make money and is an important component of the financial system.

There are different types of interest rates, including fixed and variable rates. A fixed interest rate remains the same throughout the loan term, while a variable interest rate may change based on market conditions. Interest rates can also be compounded, which means that interest is added to the principal amount, and future interest payments are calculated based on the new higher amount.

To learn more about Interest visit here:

brainly.com/question/30393144

#SPJ4

The probability of choosing an r or an a is 0.7143. A single letter from the word aardvark is chosen.

The probability of choosing an r or an a from the word aardvark can be calculated as follows:

First, calculate the total number of letters in the word aardvark.

Aardvark is a seven-letter word. As a result, there are seven letters available.

Next, calculate the number of r's and a's in the word aardvark.

There are five letters that are either an r or an a in aardvark.

As a result, there are two r's or three a's in aardvark.

So, the probability of choosing an r or an a is:

[tex]P("r" or "a") = \frac{number of r's or a's in aardvark}{total number of letters in aardvark} \\ = 5/7\\=0.7143[/tex]

The probability of choosing an r or an a is 0.7143.

Learn more about Probability here:

brainly.com/question/24756209

#SPJ11

The length and width of the rectangle is about 33cms and 9cms. This can be calculated with the help of the given area of the rectangle.

Let the original length and width of the rectangle be L and W respectively.

The given area of the rectangle is 297 square cm.

Area = L × B

297 = L × B

As per the question, the length is increased by 3 cm and the width is decreased by 1 cm.

Therefore, the new length and width are L + 3 and W - 1 respectively.

The new area is 3 square cm more than the original area.

So, (L + 3) × (W - 1) = 297 + 3

L×W -L +3W - 303 = 0

297 - L +3W - 303 = 0

-L + 3W - 6 = 0

-297/W + 3W = 6

-297 + 3W² = 6W

W² - 2W - 99 = 0

Using the quadratic formula, we get,

W = -2±[tex]\sqrt{ 2^2 - 4X1 X ( -99 ) ] ) / 2 X1 }[/tex]

[tex]W =\frac{-2±\sqrt{ (4+396)}}{2}[/tex]

[tex]W =\frac{-2±20}{2}[/tex]

Width can't be negative so, W = 9 cm

So, L  297/W

L = 297/9

L = 33cm

Therefore, the length and width of the rectangle are 33 cm and 9 cm respectively.

Learn more about Area here:

https://brainly.com/question/27683633

#SPJ11

1/6 + 1/4= 10/24 (5/12 simplified)

2.50× 12= 30

This is the total sum of money shared.

7/12 is given to Farooq

7/12 of 30 is 17.5

answer= £17.5

Factoring integers with sublinear resources on a superconducting quantum processor can be achieved using quantum approximate optimization algorithm" (QAOA) or quantum phase estimation algorithm (QPE) approach.

Factoring large integers is a problem of significant importance in the field of cryptography.

Classical computers have limited efficiency in solving this problem, and their performance is expected to decline further as the size of the integers to be factored increases.

In contrast, quantum computers are expected to have exponential speedup in factoring large integers, thanks to Shor's algorithm.

Recently, researchers have been exploring the possibility of using superconducting quantum processors to factor integers with sublinear resources.

One approach is to use a so-called "quantum approximate optimization algorithm" (QAOA), which maps the problem of factoring integers to a problem of finding the ground state of a certain Hamiltonian.

The QAOA can be implemented using a superconducting quantum processor, with the problem Hamiltonian implemented by a set of two-qubit gates.

Another approach is to use the quantum phase estimation algorithm (QPE) to estimate the eigenvalues of the problem Hamiltonian.

This can be used to factor integers by finding the period of a certain function using the quantum Fourier transform, as in Shor's algorithm. QPE can be implemented on a superconducting quantum processor using phase estimation circuits, which require only polynomial resources.

Learn more about superconducting quantum processors on:

brainly.com/question/29235650

#SPJ1

To determine the degree of the Maclaurin polynomial required for the error in the approximation of the function f(x) = -x+1 at the indicated value of x to be less than 0.001, we can use the formula: N ≥ ln(error)/ln(absolute value of x) + 1.

For our given function, the error is 0.001, and the value of x is 0.2. Plugging these values into the formula, we get: N ≥ ln(0.001)/ln(0.2) + 1, which is equivalent to N ≥ 6.64 + 1 = 7.64. Therefore, we need the degree of the Maclaurin polynomial to be 7.64 in order for the error in the approximation of the function at the indicated value of x to be less than 0.001.

For more such questions on Maclaurin polynomial

https://brainly.com/question/29500966

#SPJ11


a. Two levels of factor B were used in the experiment.

b. The degrees of freedom associated with interaction are 50.

c. The error mean square is 6.00. d. The mean square for factor A is 175.00.e. The experiment was conducted with three replicates.f. The interaction is significant. Factor A is significant. Factor B is not significant.g. An estimate of the standard deviation of the response variable is 2.449. h. If the experiment had been run in blocks (CRBD) there would have been 12 degrees of freedom for blocks.Solution:Factorial design: A factorial design is an experimental design that consists of two or more factors, each with two or more levels, and each subject is assigned to one and only one level of each factor. The objective of a factorial experiment is to analyze the effect of each factor on the response variable and to examine if there is any interaction between factors.a. Two levels of factor B were used in the experiment.b. Interaction degrees of freedom = AB = 50.c.

Mean square for error: MSE = 150/10 = 15.d. Mean square for factor A: MS(A) =[tex]SSA/dfA = 350/2 = 175.e.\\[/tex] Three replicates were conducted (from the error df = 10).f. Interaction is significant. Factor A is significant. Factor B is not significant.g. Estimate of the standard deviation of the response variable: sqrt(15/2) = 2.449.h. If the experiment had been conducted in a CRBD, there would have been 12 degrees of freedom for the block.

for such more questions on standard deviation

https://brainly.com/question/475676

#SPJ11

The total volume of the sample is 0.0067 m³ and the density of the sample is 2753.73 kg/m³.

An ore sample weighs 18.5 N in air. When the sample is suspended by a light cord and totally immersed in water, the tension in the cord is 11.8 N. When the ore sample is immersed in water, the tension in the cord is given as 11.8 N.

Thus, the buoyancy force experienced by the ore sample is given by the difference between the weight of the sample in the air and the tension in the cord.

Buoyancy force experienced by the ore sample = Weight of the sample in the air - Tension in the cord

Buoyancy force experienced by the ore sample = (18.5 N) - (11.8 N)

Buoyancy force experienced by the ore sample = 6.7 N

Also, we know that the weight of the ore sample in air is equal to the weight of the ore sample when immersed in water.

Weight of the ore sample = Weight of the displaced water

Weight of the ore sample = Buoyancy force experienced by the ore sample

Weight of the ore sample = 6.7 N

The density of the ore sample

Density is given by the formula Density = Mass/Volume

Where Density is measured in kg/m³

Mass is measured in kg

Volume is measured in m³

Also, the density of water is given as 1000 kg/m³.

The density of the ore sample = Mass/Volume

Mass = Density x Volume

Volume of the ore sample can be obtained from volume of the displaced water.

Volume of the displaced water = Weight of the ore sample/Density of water

Volume of the displaced water = (6.7 N)/(1000 kg/m³)

Volume of the displaced water = 0.0067 m³

Density of the ore sample = (18.5 N)/(0.0067 m³)

Density of the ore sample = 2753.73 kg/m³

Therefore, 0.0067 m³ is the sample's total volume and 2753.73 kg/m³ is the density of the sample.

To know more about density: https://brainly.com/question/952755

#SPJ11

The appropriate inference procedure for the researchers to analyze the results depends on the specific research question and the nature of the data.

A one-sample zz-interval for a population proportion is appropriate when the research question involves estimating the proportion of a population that has a particular characteristic or attribute.

A one-sample tt-interval for a sample mean difference is appropriate when the research question involves estimating the difference between a sample mean and a known population mean.

A matched-pairs tt-interval for a population mean difference is appropriate when the research question involves estimating the difference between two related population means.

A matched-pairs tt-interval for a sample mean difference is appropriate when the research question involves estimating the difference between two related sample means.

A two-sample tt-interval for a difference between means is appropriate when the research question involves estimating the difference between two independent sample means.

Therefore, without knowing the specifics of the research question and the data, it is impossible to determine the most appropriate inference procedure.

For more questions like Sample click the link below:

https://brainly.com/question/30759604

#SPJ11

The quantity of  water are needed to fill the tank to the top is 960 cubic inches

The total volume of the tank is given by multiplying its length, width, and height

Volume of tank = 24 inches × 10 inches × 12 inches = 2,880 cubic inches

The volume of water in the tank is given by multiplying the filled height with the base area of the tank:

Volume of water = 8 inches × 24 inches × 10 inches = 1,920 cubic inches

To find how many more cubic inches of water are needed to fill the tank to the top, we need to subtract the volume of water in the tank from the total volume of the tank:

Volume of air space = Volume of tank - Volume of water

= 2,880 cubic inches - 1,920 cubic inches

= 960 cubic inches

Learn more about volume here

brainly.com/question/21416050

#SPJ4

The given question is incomplete, the complete question is:

Julio bought a fish tank shaped like a rectangular prism. The inside of the tank measures

24 inches in length, 10 inches in width, and 12 inches in height. The tank is filled with water to a height of 8 inches. How many more cubic inches of water are needed to fill the tank to the top?

Answer: The value of x is 3.45%

Step-by-step explanation:

We can solve the problem by using the formula for compound interest:

A = P(1 + r/n)^(nt)

Where:

A = final amount

P = principal (initial investment)

r = annual interest rate (as a decimal)

n = number of times the interest is compounded per year

t = time in years

In the first year, Charlie gets 2% interest, compounded annually. So, using the formula, we have:

A1 = 4000(1 + 0.02/1)^(1*1)

A1 = 4080

After the first year, Charlie has £4080 in her account. For the next two years, she gets x% interest, compounded annually. Using the formula again, we have:

A2 = 4080(1 + x/100/1)^(1*2)

A2 = 4080(1 + x/100)^2

Finally, after three years, Charlie has £4228.20 in her account. So, we can set up an equation:

A1 * A2 = 4000 * (1 + 0.02) * 4228.20

Substituting the values of A1 and A2, we get:

4080(1 + x/100)^2 = 4366.4496

Dividing both sides by 4080, we get:

(1 + x/100)^2 = 1.0694

Taking the square root of both sides, we get:

1 + x/100 = 1.0345

Subtracting 1 from both sides and multiplying by 100, we get:

x = 3.45

Therefore, the value of x is 3.45%.

To compute the 90% confidence interval for the population proportion, large a sample should you draw to ensure that the sample proportion does not deviate from the population proportion by more than 0.05, 271 is the minimum sample

A confidence interval is a range of values where an unknown population parameter lies. The level of confidence is the likelihood of the interval containing the parameter.

The formula to calculate the sample size required to produce a specific margin of error with a known level of confidence for the estimation of a population proportion is given below: 95% confidence interval for population proportion using a sample size formula

[tex]\[n=\frac{z^{2}p(1-p)}{E^{2}}\][/tex]

Where

[tex]\[z\][/tex] is the z-score The formula is modified to calculate the sample size required to produce a specific margin of error with a known level of confidence as follows:

[tex]\[n=\frac{z^{2}}{4E^{2}}\][/tex]

Note: For this problem, the sample size needs to be large enough to ensure that the sample proportion does not deviate from the population proportion by more than 0.05.

Using a Z-score Table, the z-value that corresponds to 90% confidence interval is 1.645.

[tex]n=\frac{z^{2}}{4E^{2}}\ = \frac{1.645^{2}}{4(0.05)^{2}} = \frac{2.706225}{0.0100} = 270.6[/tex]

(rounded up to the next highest integer)Therefore, 271 is the minimum sample size required to compute a 90% confidence interval for the population proportion.

See more about sample size at: https://brainly.com/question/28583871

#SPJ11