What is the area of the shaded region? 3.5 and 1.2

Answers

Answer 1

The area of the shaded region is 0.785 square units.

To find the shaded area between the circle and the square.

To begin, let's find the area of the square. A square with sides of 1.2 units has an area of 1.44 square units.

Now let's find the area of the circle. The radius of the circle is half the diameter, which is 1.75 units. The area of the circle is πr² = π(1.75)² ≈ 9.616 square units.

Now, we need to find the area of the shaded region by subtracting the area of the square from the area of the circle: 9.616 - 1.44 = 8.176 square units.

However, this is not the shaded region as the square is intersecting the circle. If we subtract the area of the unshaded region from the total area of the shaded region, we will get the area of the shaded region.

The unshaded area is the area of the square not covered by the circle, which is 0.435 square units. Thus, the area of the shaded region is

9.616 - 1.44 - 0.435 = 7.741 square units.

Finally, the area of the shaded region is approximately 0.785 square units.

Know more about area of circle, here:

https://brainly.com/question/28642423

#SPJ11


Related Questions

let l be the line in r3 that consists of all scalar multiples of the vector 2,1,2. Find the orthogonal projection of the vector 1,1,1 onto L

Answers

The orthogonal projection of the vector (1,1,1) onto the line L is the vector (10/9, 5/9, 10/9).

The orthogonal projection of a vector onto a line is the closest point on the line to that vector.

To find the projection of the vector 1,1,1 onto the line L that consists of all scalar multiples of the vector 2,1,2, we can first find a vector on the line L that is closest to the vector 1,1,1.

Let's call the vector on the line L that is closest to 1,1,1 as p.

To find p, we can use the following formula:

[tex]p = ((1,1,1) . (2,1,2)) / ||(2,1,2)||^2 \times (2,1,2)[/tex]

where · denotes the dot product and || || denotes the Euclidean norm.

We can calculate the dot product of (1,1,1) and (2,1,2) as follows:

(1,1,1) · (2,1,2) = 2 + 1 + 2 = 5

We can calculate the norm of (2,1,2) as follows:

[tex]||(2,1,2)|| = \sqrt{(2^2 + 1^2 + 2^2) } = \sqrt{9 } = 3[/tex]

Therefore, we have:

[tex]p = (5 / 9) \times (2,1,2) = (10/9, 5/9, 10/9).[/tex]

For similar question on orthogonal projection.

https://brainly.com/question/30839128

#SPJ11

To find the orthogonal projection of a vector onto a line, we need to find the component of the vector that lies on the line. We can then subtract that component from the original vector to get the component that is orthogonal (perpendicular) to the line. The orthogonal projection of the vector 1,1,1 onto the line L in R3 is (10/9, 5/9, 10/9).

Let's start by finding a vector that lies on the line L. We can take any scalar multiple of the vector 2,1,2, so let's choose the multiple that gives us the closest vector to 1,1,1. This will be the projection of 1,1,1 onto L.

To find this scalar multiple, we can use the dot product. The dot product of two vectors gives us the cosine of the angle between them, multiplied by their magnitudes. When the dot product is zero, the vectors are orthogonal. So, we want to find the scalar multiple of 2,1,2 that gives us a vector that is parallel to 1,1,1, which means their dot product will be maximized.

(1,1,1) dot (2,1,2) = 2 + 1 + 2 = 5

The magnitude of (2,1,2) is sqrt(2^2 + 1^2 + 2^2) = sqrt(9) = 3.

So, the scalar multiple of 2,1,2 that gives us the projection of 1,1,1 onto L is:

(1,1,1) dot (2,1,2) / (2,1,2) dot (2,1,2) * (2,1,2) = 5 / 9 * (2,1,2) = (10/9, 5/9, 10/9)

This is the closest point on the line L to the vector (1,1,1), so it is the projection of (1,1,1) onto L.

To find the component of (1,1,1) that is orthogonal to L, we can subtract this projection from the original vector:

(1,1,1) - (10/9, 5/9, 10/9) = (1/9, 4/9, -1/9)

This is the vector that is orthogonal to the line L and has the same magnitude as the component of (1,1,1) that lies on L.
To find the orthogonal projection of the vector 1,1,1 onto the line L in R3, which consists of all scalar multiples of the vector 2,1,2, we use the formula for projection:

proj_L(u) = (u·v)/(v·v) * v

where u is the vector being projected (1,1,1), v is the vector that defines the line L (2,1,2), and "·" denotes the dot product.

First, compute the dot products:
u·v = (1)(2) + (1)(1) + (1)(2) = 5
v·v = (2)(2) + (1)(1) + (2)(2) = 9

Next, compute the scalar multiple:
(5/9) * v = (5/9)(2,1,2) = (10/9, 5/9, 10/9)

So, the orthogonal projection of the vector 1,1,1 onto the line L in R3 is (10/9, 5/9, 10/9).

Learn more about vector at: brainly.com/question/29740341

#SPJ11

Find < A :


(Round your answer to the nearest hundredth)

Answers

The measure of angle A in a right triangle with base 5 cm and hypotenuse 10 cm is approximately 38.21 degrees.

We can use the inverse cosine function (cos⁻¹) to find the measure of angle A, using the cosine rule for triangles.

According to the cosine rule, we have:

cos(A) = (b² + c² - a²) / (2bc)

where a, b, and c are the lengths of the sides of the triangle opposite to the angles A, B, and C, respectively. In this case, we have b = 5 cm and c = 10 cm (the hypotenuse), and we need to find A.

Applying the cosine rule, we get:

cos(A) = (5² + 10² - a²) / (2 * 5 * 10)

cos(A) = (25 + 100 - a²) / 100

cos(A) = (125 - a²) / 100

To solve for A, we need to take the inverse cosine of both sides:

A = cos⁻¹((125 - a²) / 100)

Since this is a right triangle, we know that A must be acute, meaning it is less than 90 degrees. Therefore, we can conclude that A is the smaller of the two acute angles opposite the shorter leg of the triangle.

Using the Pythagorean theorem, we can find the length of the missing side at

a² = c² - b² = 10² - 5² = 75

a = √75 = 5√3

Substituting this into the formula for A, we get:

A = cos⁻¹((125 - (5√3)²) / 100) ≈ 38.21 degrees

Therefore, the measure of angle A is approximately 38.21 degrees.

Learn more about cosine rule here:

brainly.com/question/30918098

#SPJ1

1. Which angles are represented by the same point on the unit circle as 3π/4? Select all that apply.​

Answers

-3π/4 is an angle in the fourth quadrant that is represented by the same point on the unit circle as 3π/4.

Angles are represented by the same point on the unit circle as 3π/4, we need to first identify the quadrant in which 3π/4 lies.

3π/4 is greater than π/2 (which represents the angle at the positive x-axis intersects the unit circle) but less than π (which represents the angle at which the negative x-axis intersects the unit circle).

3π/4 lies in the second quadrant of the unit circle.

Angles in the second quadrant have the same sine value as angles in the fourth quadrant, since sine is positive in both quadrants.

Angle in the fourth quadrant that has the same sine value as 3π/4 will be represented by the same point on the unit circle.

Angles, we can use the fact that sine is an odd function, means that sin(-θ) = -sin(θ) for any angle θ.

Angle in the fourth quadrant that has the same sine value as 3π/4 by negating its sine value:

sin(-3π/4) = -sin(3π/4)

The angles that are represented by the same point on the unit circle as 3π/4 are:

3π/4 (second quadrant)

-3π/4 (fourth quadrant)

For similar questions on angle

https://brainly.com/question/25770607

#SPJ11

compute the partial sums 2,4, and 6. 5 522 532 542 ⋯

Answers

To compute the partial sums of 2, 4, and 6 followed by the sequence 5, 522, 532, 542, and so on, we add up the terms one by one.

In mathematics, a partial sum is the sum of the first n terms of a series. A series is an infinite sum of terms, while a partial sum is a finite sum of the first n terms.

The first partial sum is simply the first term, which is 2. The second partial sum is the sum of the first two terms, which is 2 + 4 = 6. The third partial sum is the sum of the first three terms, which is 2 + 4 + 6 = 12. Continuing in this way, we get:

- Fourth partial sum: 2 + 4 + 6 + 5 = 17
- Fifth partial sum: 2 + 4 + 6 + 5 + 522 = 529
- Sixth partial sum: 2 + 4 + 6 + 5 + 522 + 532 = 1061
- Seventh partial sum: 2 + 4 + 6 + 5 + 522 + 532 + 542 = 1603

And so on. Each partial sum adds one more term from the sequence.

To learn more about partial sums visit : https://brainly.com/question/31383244

#SPJ11

Sharon starts her errands at her home, point A (2,5). She first drives south 5 miles to reach the bank, point B (2,0). She drove 12 miles east to the grocery store, point C (14,0). If she drove a straight line home what is her distance between the grocery store and home?

1: 10 miles
2: 11 miles
3: 13 miles
4: 6 miles

Answers

To find the distance between the grocery store and home, we need to use the distance formula.

The distance formula is given as:

Distance Formula = √((x₂ - x₁)² + (y₂ - y₁)²)

Where (x₁, y₁) and (x₂, y₂) are the coordinates of two points.Let us first find the coordinates of the grocery store C. We know that the grocery store is at point C (14,0).

The coordinates of Sharon's home are (2,5).To find the distance between the grocery store and home, we will put these coordinates in the distance formula.

Distance between the grocery store and home = √((14 - 2)² + (0 - 5)²)

Simplifying the above equation, we get;

Distance between the grocery store and home = √(12² + (-5)²)

Distance between the grocery store and home = √(144 + 25)

Distance between the grocery store and home = √169

Distance between the grocery store and home = 13

Hence, the distance between the grocery store and home is 13 miles. Therefore, the correct option is 3.

To know more about distance visit :-

https://brainly.com/question/26550516

#SPJ11

how many ways can marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once?

Answers

There are 680 ways can Marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once.

We have to given that;

Marie choose 3 pizza toppings from a menu of 17 toppings.

Hence, To find ways can Marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once,

We can formulate;

⇒ ¹⁷C₃

⇒ 17! / 3! 14!

⇒ 17 × 16 × 15 / 6

⇒ 680

Thus, There are 680 ways can Marie choose 3 pizza toppings from a menu of 17 toppings if each topping can only be chosen once.

Learn more about the combination visit:

brainly.com/question/28065038

#SPJ1

Write an equation for the degree-four polynomial graphed below

Answers

The equation for the polynomial graphed is:

p(x) = -0.0625*(x - 2)*(x - 4)*(x + 2)*(x + 4)

How to find the equation of the polynomial?

Let's assume that the leading coefficient is a, we can see that the zeros of the polynomialal are at:

x = -4

x = -2

x = 2

x = 4

Then the general equation is:

p(x) = a*(x - 2)*(x - 4)*(x + 2)*(x + 4)

Now, we also can see that the y-intercept is -4, then:

p(0) = a*(-2)*(-4)*(2)*(4) = -4

          a*8*8 = -4

          a = -0.0625

The equation for the polynomial is:

p(x) = -0.0625*(x - 2)*(x - 4)*(x + 2)*(x + 4)

Learn more about polynomials at:

https://brainly.com/question/4142886

#SPJ1

what volume of n2, measured at 17 °c and 720 mm hg, will be produced by the decomposition of 10.7 g nan3? 2 NaN3 (s) = 2 Na(s) + 3N2 (g)

Answers

1.74 L of N₂ will be produced by the decomposition of 10.7 g of NaN₃ at 17°C and 720 mmHg.

To solve this problem, we need to use the ideal gas law which states that PV = nRT where P is pressure, V is volume, n is moles, R is the gas constant, and T is temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin by adding 273.15. Thus, 17°C + 273.15 = 290.15 K.

Next, we need to convert the pressure from mmHg to atm by dividing by 760.

Thus, 720 mmHg / 760 mmHg/atm = 0.947 atm.

We can then use stoichiometry to find the number of moles of N₂ produced.

2 moles of NaN₃ produces 3 moles of N₂.

Thus, 10.7 g NaN₃ x (1 mol NaN₃/65.01 g NaN₃) x (3 mol N₂/2 mol NaN₃) = 0.0830 mol N₂.

Finally, we can use the ideal gas law to find the volume of N₂ produced.

V = (nRT)/P = (0.0830 mol x 0.0821 L x atm/K x mol x 290.15 K)/0.947 atm = 1.74 L.

Learn more about ideal gas law at

https://brainly.com/question/30458409

#SPJ11

Find the indicated derivative. dp/dq for p = (q^2 + 2)/(4q-4)

Answers

The indicated derivative of p with respect to q, dp/dq, can be found using the quotient rule of differentiation. Let's rewrite p as (q^2 + 2)(4q-4)^(-1). Using the quotient rule, we get dp/dq = [2q(4q-4)^(-1) - (q^2+2)(4(4q-4)^(-2))] = [2q/(4q-4) - (q^2+2)/(4q-4)^2]. We can simplify this further by factoring out a 2 from the first term in the numerator to get dp/dq = [2(q-2)/(4q-4)^(2) - (q^2+2)/(4q-4)^2]. This is our final answer.

To find the derivative dp/dq, we first rewrite p in a form that makes it easier to apply the quotient rule. We then use the quotient rule, which states that for a function f(x)/g(x), the derivative is [(g(x)f'(x) - f(x)g'(x))/(g(x))^2]. We substitute q^2+2 for f(x) and 4q-4 for g(x) and differentiate each term separately. We then simplify the result to obtain the final answer.

The indicated derivative dp/dq for p = (q^2 + 2)/(4q-4) can be found using the quotient rule of differentiation. The final answer is dp/dq = [2(q-2)/(4q-4)^(2) - (q^2+2)/(4q-4)^2].

To know more about differentiation visit:

https://brainly.com/question/24898810

#SPJ11

Bacteria begins to grow on the water's surface in a non-operational swimming pool on september 20. the bacteria grows and covers the water's
surface in such a way that the area covered with bacteria doubles every day. if it continues to grow in this way, the water's surface will be
entirely covered with bacteria on september 28.
when will a quarter of the water's surface be covered?
o a.
the water's surface will be covered a quarter of the way on september 24.
b.
the water's surface will be covered a quarter of the way on september 26.
c.
the water's surface will be covered a quarter of the way on september 27.
od. the water's surface will be covered a quarter of the way on september 25.​

Answers

Answer: 26th will be quarter

find f
f'''(x)=e^x-2sinx ,f(0)=3 , f(pi/2)=0

Answers

If we use the initial conditions:

f(0) = 3 => 3 = 1 - 1 + 0 + 0 + C3 => C3 = 3

[tex]f(\pi/2) = 0 = > 0 = e^(\pi/2) - 2(0) + (C1/2)(\pi^2/4) + C2(\pi/2) + 3[/tex]

How to solve

To find f(x) from the third derivative, ff'''(x) = [tex]e^x - 2sinx[/tex], and given f(0) = 3, f(π/2) = 0, we need to integrate thrice and use the initial conditions to determine the constants.

Integrate: ff''(x) = [tex](e^x - 2sinx) dx[/tex] = [tex]e^x + 2cosx + C1[/tex]

Now we have [tex]f''(x) = e^x + 2cos(x) + C1[/tex]

Integrate: ff'(x) = ∫[tex](e^x + 2cosx + C1) dx[/tex] = [tex]e^x + 2sinx + C1x + C2[/tex]

The value which we have now is  [tex]f'(x) = e^x + 2sin(x) + C1x + C2[/tex]

Integrate: f(x) = ∫[tex](e^x + 2sinx + C1x + C2) dx[/tex] = [tex]e^x - 2cosx + (C1/2)x^2 + C2x + C3[/tex]

Now, we have:[tex]f(x) = e^x - 2cos(x) + 1/2*C1x^2 + C2x + C3[/tex]

As we are done integrating, we make use of the initial conditions to determine the constants.

Now, use the initial conditions:

f(0) = 3 => 3 = 1 - 1 + 0 + 0 + C3 => C3 = 3

[tex]f(\pi/2) = 0 = > 0 = e^(\pi/2) - 2(0) + (C1/2)(\pi^2/4) + C2(\pi/2) + 3[/tex]

You now have a system of equations to solve for C1 and C2.

Read more about integrals here:

https://brainly.com/question/22008756

#SPJ1

What is the value of the intercept?
A random sample of 79 companies from the Forbes 500 list (which actually consists of nearly 800 companies) was selected, and the relationship between salts in hundred; of thousands of dollars) and profits (in hundreds of thousands of dollars) was investigated by regression. The following simple linear regression model was used:
P
r
o
f
i
t
s
i
=
β
0
+
β
1
(
S
a
l
e
s
)
i
+
ε
i
where the deviations ε
i
were assumed to be independent and normally distributed. This model was fit to the data using the method of least squares. The following results were obtained from statistical software:
R
2
= 0.662
s = 466.2
Variable Parameter Est. Std. Err. of Parameter Est.
Constant 176.644 61.16
Sales 0.002408 0.0075

Answers

The estimated regression equation for this model is: Profits = 176.644 + 0.002408(Sales). This equation can be used to predict the expected profits for a given level of sales, as long as the assumptions of the linear regression model are met

The value of the intercept in this regression model is 176.644. The intercept represents the expected value of the response variable (profits) when the predictor variable (sales) is equal to zero. In other words, it represents the profit a company would make if it had zero sales. However, it is important to note that the intercept may not always have a meaningful interpretation in practical terms, especially when the predictor variable cannot be zero or negative.

The coefficient of determination (R-squared) in this model is 0.662, which indicates that 66.2% of the variability in profits can be explained by the linear relationship with sales. The standard error of the estimate (s) is 466.2, which represents the average distance between the actual profits and the predicted profits from the regression model.

The estimated regression equation for this model is: Profits = 176.644 + 0.002408(Sales). This equation can be used to predict the expected profits for a given level of sales, as long as the assumptions of the linear regression model are met.

Learn more about profits here:

https://brainly.com/question/15036999

#SPJ11

A naturally occurring whirlpool in the Strait of Messina, a channel between Sicily and the Italian mainland, is about 6 feet across at its center, and is said to be large enough to swallow small fishing boats. The speed, s (in feet per second), of the water in the whirlpool varies inversely with the radius, r (in feet). If the water speed is 2. 5 feet per second at a radius of 30 feet, what is the speed of the water at a radius of 3 feet? *​

Answers

Given that speed of water in the whirlpool, s (in feet per second) varies inversely with the radius, r (in feet) i.e., s * r = k, where k is the constant of variation.

Using the information, given in the question, we have;

2.5 feet per second * 30 feet = k75 feet² per second = k

We can now use k to find the speed of water at a radius of 3 feet.s * r = k ⇒ ss * 3 feet = 75 feet² per seconds = 2.5 feet per seconds * 30 feet,

since k = 75 feet² per seconds= (75 feet² per second) / (3 feet)ss = 25 feet per second

Thus, the speed of the water at a radius of 3 feet is 25 feet per second.

To know more about variation, visit:

https://brainly.com/question/17287798

#SPJ11

1) Define f : ℝ → ℝ and g : ℝ → ℝ by the formulas f(x) = x + 4 and g(x) = −x for each x ℝ. Find the following.a) (g ∘ f)−1 =b) g−1 =c) f −1. =d) f −1 ∘ g−1 =

Answers

Thus, the composite function are -

a) (g ∘ f)−1(x) = -x - 4.
b) g−1(x) = -x.
c) f −1(x) = x - 4.
d) (f −1 ∘ g−1)(x) = -x - 4.

a) To find (g ∘ f)−1, we first need to find g ∘ f. This means we need to plug function f(x) into g(x) and simplify:
(g ∘ f)(x) = g(f(x)) = g(x + 4) = -(x + 4)

Now we need to find the inverse of this function, which means solving for x:
-(x + 4) = y
x + 4 = -y
x = -y - 4
So, (g ∘ f)−1(x) = -x - 4.

b) To find g−1, we need to solve for x in the equation g(x) = -x:
g(x) = -x
x = -g(x)
So, g−1(x) = -x.

c) To find f −1, we need to solve for x in the equation f(x) = x + 4:
f(x) = x + 4
x = f(x) - 4
So, f −1(x) = x - 4.

d) To find f −1 ∘ g−1, we need to plug g−1(x) into f −1(x) and simplify:
f −1 ∘ g−1(x) = f −1(-x) = -x - 4.
So, (f −1 ∘ g−1)(x) = -x - 4.

In summary:
a) (g ∘ f)−1(x) = -x - 4.
b) g−1(x) = -x.
c) f −1(x) = x - 4.
d) (f −1 ∘ g−1)(x) = -x - 4.

Know more about the composite function

https://brainly.com/question/10687170

#SPJ11

give a parametric description of the form r(u,v)=〈x(u,v),y(u,v),z(u,v)〉 for the following surface. the cap of the sphere x2 + y2 + z2=25, for underroot3

Answers

The equation r(u,v) = 〈5cos(u)sin(v), 5sin(u)sin(v), 5cos(v)〉, with 0≤u≤2π and arccos(√3/5)≤v≤π/2.

The parametric form of a sphere with radius R centered at the origin is r(u,v) = 〈Rcos(u)sin(v), Rsin(u)sin(v), Rcos(v)〉, where 0≤u≤2π and 0≤v≤π.

For the given sphere, R=5, and the equation becomes r(u,v) = 〈5cos(u)sin(v), 5sin(u)sin(v), 5cos(v)〉. To represent the cap with z≥√3, we find the corresponding value of v, which is arccos(√3/5).

Thus, the final parametric description is r(u,v) = 〈5cos(u)sin(v), 5sin(u)sin(v), 5cos(v)〉, with 0≤u≤2π and arccos(√3/5)≤v≤π/2.

To know more about parametric form click on below link:

https://brainly.com/question/29146759#

#SPJ11

Hassan built a fence around a square yard. It took 48\text{ m}^248 m 2

48,m squared of lumber to build the fence. The fence is 1. 5meters tall. What is the area of the yard inside the fence?

Answers

The area of the square yard inside the fence is 81 m².

The area of the square yard inside the fence is the difference between the area of the square yard and the area of the square yard with the fence. First, let's calculate the perimeter of the square yard with the fence.

P = 4s, where P is the perimeter of the square yard, and s is the length of one side of the yard.

P = 48 m 1.5 m of lumber was used to build the fence. This implies that each side of the square yard is 48/4 = 12 meters long. Therefore, the perimeter is 4 × 12 = 48 meters.

We must subtract 1.5 meters from the height of the square yard since it is 1.5 meters tall, giving us 12 - 1.5 - 1.5 = 9 meters as the length of one side of the square yard. The area of the yard inside the fence can now be calculated.

A = s²A = 9²A = 81 m²

Therefore, the area of the yard inside the fence is 81 square meters.

Therefore, the area of the square yard inside the fence is 81 m².

Know more about perimeter here,

https://brainly.com/question/7486523

#SPJ11

Using sigma notation, write the expression as an infinite series. 2+ 2/2 + 2/3 +2/4+....

Answers

Sigma notation is a shorthand way of writing the sum of a series of terms.

The given expression can be written using sigma notation as:

Σ (2/n)

n=1

This is an infinite series that starts with the term 2/1, then adds the term 2/2, then adds the term 2/3, and so on. The nth term in the series is 2/n.

what is series?

In mathematics, a series is the sum of the terms of a sequence. More formally, a series is an expression obtained by adding up the terms of a sequence. Series are used in many areas of mathematics, including calculus, analysis, and number theory.

To learn more about series visit:

brainly.com/question/15415793

#SPJ11

Identify which type of sampling is used. A researcher interviews 19 work colleagues who work in his building. A. Convenience Sampling B. Random Sampling O C. Stratified Sampling O D. Systematic Sampling O E. Cluster Sampling

Answers

The type of sampling used in the scenario described is convenience sampling. Convenience sampling is a non-probability sampling technique in which individuals are selected for the sample based on their availability and willingness to participate.

In this case, the researcher selected 19 work colleagues who work in the same building, which may have been convenient for the researcher due to proximity and accessibility.

Convenience sampling is a quick and inexpensive way to gather data, but it has limitations in terms of representativeness and generalizability. Since the sample is not selected at random, it may not be representative of the entire population of interest. Additionally, individuals who are more accessible and willing to participate may have different characteristics or experiences than those who are not.

Therefore, it is important to consider the potential biases and limitations of convenience sampling when interpreting the results of a study. In situations where representativeness and generalizability are important, a more rigorous and systematic sampling technique, such as random or stratified sampling, may be more appropriate.

Learn more about sampling  here:

https://brainly.com/question/31523301

#SPJ11

find the coordinate matrix of x relative to the orthonormal basis b in rn. x = (5, 20, 10), b = 3 5 , 4 5 , 0 , − 4 5 , 3 5 , 0 , (0, 0, 1)

Answers

The coordinate matrix of x relative to the orthonormal basis b is then: [x]b = [19, -9, 10]

To get the coordinate matrix of x relative to the orthonormal basis b in Rn, we need to express x as a linear combination of the basis vectors in b. We can do this by using the formula: x = [x · b1]b1 + [x · b2]b2 + [x · b3]b3
where · denotes the dot product and b1, b2, and b3 are the orthonormal basis vectors in b.
First, we need to normalize the basis vectors:
|b1| = √(3^2 + 4^2) = 5
b1 = (3/5, 4/5, 0)
|b2| = √(4^2 + 3^2) = 5
b2 = (-4/5, 3/5, 0)
|b3| = 1
b3 = (0, 0, 1)
Next, we compute the dot products:
x · b1 = (5, 20, 10) · (3/5, 4/5, 0) = 19
x · b2 = (5, 20, 10) · (-4/5, 3/5, 0) = -9
x · b3 = (5, 20, 10) · (0, 0, 1) = 10
Using these values, we can express x as a linear combination of the basis vectors:
x = 19b1 - 9b2 + 10b3
The coordinate matrix of x relative to the orthonormal basis b is then:
[x]b = [19, -9, 10]
Note that this matrix is a column vector since x is a column vector.

Learn more about matrix here, https://brainly.com/question/11989522

#SPJ11

Write a formula for the function, g(x), described as follows:

Use the function, f(x)=|x|. Reflect the function over the x-axis and move the function down by 4 units

Answers

The formula for the function, g(x) described as follows is `g(x) = -|x| - 4`.

The formula for the function g(x) described as follows:

The function f(x)=|x| is to be reflected over the x-axis and moved down by 4 units.

Given function, f(x)=|x| .To reflect f(x) over the x-axis we multiply the function by -1.

When we multiply f(x) by -1, it changes the sign of the function to be below the x-axis. So, we can reflect it by multiplying f(x) by -1.

Thus, we get -f(x) which is the reflection of f(x) over x-axis. And to move the function down by 4 units, we can just subtract 4 from f(x).

Thus, the formula for the function, g(x) described as follows: `g(x) = -f(x) - 4`

Now, substitute the given function `f(x) = |x|` in the above formula. `g(x) = -|x| - 4`

Know more about function, here:

https://brainly.com/question/30721594

#SPJ11

In a right triangle, the side opposite angle β has a length of 16.4 cm. the hypotenuse of the triangle has a length of 25.1 cm. what is the approximate value of sin(β)? 0.863 1.530 0.653 0.757

Answers

In a right triangle with side opposite angle β having a length of 16.4 cm and the hypotenuse having a length of 25.1, the approximate value of sin(β) is 0.653.

Approximate value of sin(β) be calculated using the sine formula:

sin(β) = (opposite side) / hypotenuse

1. Identify the opposite side and hypotenuse.
Opposite side = 16.4 cm
Hypotenuse = 25.1 cm


2. Plug in the values into the sine formula.
sin(β) = (16.4 cm) / (25.1 cm)

3. Calculate sin(β).
sin(β) ≈ 0.653

Therefore, the approximate value of sin(β) is 0.653.

To know more about value of sine refer here :

https://brainly.com/question/12930075#

#SPJ11

I need help
Mark and his three friends ate dinner
out last night. Their bill totaled $52.35
and they left their server an 18% tip.
There was no tax. If they split the bill
evenly, how much did each person pay?
Round to the nearest cent.

Answers

Answer:

the answer is going to be22.51

Find the numerical solution for each of the following ODE's using the Forward Euler method. 1. ODE: y = te³ - 2y 0

Answers

The numerical solution of the ODE y' = te³ - 2y with the Forward Euler method and step size h = 0.1, for the initial condition y(0) = 0, is approximately y(1) = 0.614.

To use the Forward Euler method to solve the ODE y' = te³ - 2y, we can start with an initial condition y(0) = y0, and use the formula:

y[i+1] = y[i] + h * f(ti, yi)

where h is the step size, ti = i * h, yi is the numerical approximation of y(ti), and f(ti, yi) = ti * e³ - 2yi is the derivative of y evaluated at (ti, yi).

We can choose a small step size, such as h = 0.1, and apply the formula iteratively to find the numerical solution at each time step.

For the initial condition y(0) = 0, we have:

y[0] = 0

At the first time step (i = 1, t = 0.1), we have:

y[1] = y[0] + h * f(t[0], y[0])

= 0 + 0.1 * (t[0] * e³ - 2 * y[0])

= 0.1 * (0 * e³ - 2 * 0)

= 0

At the second time step (i = 2, t = 0.2), we have:

y[2] = y[1] + h * f(t[1], y[1])

= 0 + 0.1 * (t[1] * e³ - 2 * y[1])

= 0.1 * (0.1 * e³ - 2 * 0)

= 0.031

Similarly, we can continue to calculate the numerical solution at each time step:

y[3] = 0.074

y[4] = 0.126

y[5] = 0.186

y[6] = 0.254

y[7] = 0.331

y[8] = 0.417

y[9] = 0.511

y[10] = 0.614

Therefore, the numerical solution of the ODE y' = te³ - 2y with the Forward Euler method and step size h = 0.1, for the initial condition y(0) = 0, is approximately y(1) = 0.614.

Learn more about method here:

https://brainly.com/question/21117330

#SPJ11

Write the equations in rectangular coordinates x and y. Зл 0 = 4 (Express numbers in exact form. Use symbolic notation and fractions where needed.) y = -X r = 23 (Express numbers in exact form. Use symbolic notation and fractions where needed.) 232 1 = 2

Answers

y - 2 = -x + 2 and y = -x + 4 represents a line with slope -1 and y-intercept 4.

The first equation is in polar form and represents a circle with radius 4 centered at the origin. To convert it into rectangular form, we use the conversion formulas:

r^2 = x^2 + y^2

θ = tan^-1(y/x)

Substituting r = 4, we get:

16 = x^2 + y^2

θ = tan^-1(y/x)

Solving for y in terms of x, we get:

y = ±√(16 - x^2)

This represents two semi-circles above and below the x-axis.

The second equation is also in polar form and represents a circle with radius 23 centered at the origin. Using the same conversion formulas, we get:

529 = x^2 + y^2

θ = tan^-1(y/x)

Solving for y in terms of x, we get:

y = ±√(529 - x^2)

This represents two semi-circles above and below the x-axis.

The third equation is not given in polar form and is already in rectangular form. It represents a line passing through the points (0,2) and (1,1). Using the two-point form of a line, we get:

(y - 2)/(x - 0) = (1 - 2)/(1 - 0)

Simplifying, we get:

y - 2 = -x + 2

y = -x + 4

To know more about slope,

https://brainly.com/question/28243079

#SPJ11

reduce 5 sin(ωt) 5 cos(ωt 30°) 5 cos(ωt 150°) to the form vm cos(ωt θ).

Answers

5 sin(ωt) + 5 cos(ωt + 30°) + 5 cos(ωt + 150°) can be reduced to the form Vm cos(ωt - θ) where Vm = 5/2√(13) and θ = arctan(2√3) - π/4.

We can use the trigonometric identity cos(a+b) = cos(a)cos(b) - sin(a)sin(b) to simplify the expression:

5 sin(ωt) + 5 cos(ωt + 30°) + 5 cos(ωt + 150°)

= 5 sin(ωt) + 5 (cos(ωt)cos(30°) - sin(ωt)sin(30°)) + 5 (cos(ωt)cos(150°) - sin(ωt)sin(150°))

= 5 sin(ωt) + (5/2)cos(ωt) - (5/2)√3 sin(ωt) + (5/2)(-√3)cos(ωt) - (5/2)sin(ωt)

= [(5/2)cos(ωt) - (5/2)sin(ωt)] - [(5/2)√3 sin(ωt) + (5/2)√3 cos(ωt)]

= Vm cos(ωt - θ)

where Vm = 5/2√(13) and θ = arctan(2√3) - π/4.

Therefore, 5 sin(ωt) + 5 cos(ωt + 30°) + 5 cos(ωt + 150°) can be reduced to the form Vm cos(ωt - θ) where Vm = 5/2√(13) and θ = arctan(2√3) - π/4.

To know more about trigonometry refer here:

https://brainly.com/question/22986150

#SPJ11

Evaluate the indefinite integral as an infinite series. arctan(x^2) dx

Answers

The indefinite integral of arctan(x^2) dx as an infinite series is:

∫arctan(x^2) dx = x^3/3 - x^7/21 + x^11/55 - x^15/99 + ... + C

How to evaluate the indefinite integral of arctan(x^2) dx?

To evaluate the indefinite integral of arctan(x^2) dx as an infinite series, we can use the Maclaurin series expansion of arctan(x), which is:

arctan(x) = x - x^3/3 + x^5/5 - x^7/7 + ...

We substitute x^2 for x in this series to get:

arctan(x^2) = x^2 - x^6/3 + x^10/5 - x^14/7 + ...

Integrating both sides with respect to x, we get:

∫arctan(x^2) dx = ∫[x^2 - x^6/3 + x^10/5 - x^14/7 + ...] dx

= x^3/3 - x^7/21 + x^11/55 - x^15/99 + ... + C

Therefore, the indefinite integral of arctan(x^2) dx as an infinite series is:

∫arctan(x^2) dx = x^3/3 - x^7/21 + x^11/55 - x^15/99 + ... + C

where C is the constant of integration.

Learn more about  indefinite integral

brainly.com/question/29133144

#SPJ11

In a bag there are pink buttons, yellow buttons and blue buttons

Answers

In a bag, there are three different colors of buttons: pink, yellow, and blue. There are several methods to approach this question, but one effective way is to calculate the probability of choosing a specific button out of the entire bag.

It is important to note that probability is a fraction with the total number of outcomes on the bottom and the desired outcomes on the top. For instance, if there are five possible outcomes with two desired outcomes, the probability would be 2/5.

The probability of picking a pink button is the number of pink buttons in the bag divided by the total number of buttons. Similarly, the probability of picking a yellow button is the number of yellow buttons in the bag divided by the total number of buttons, and the probability of picking a blue button is the number of blue buttons in the bag divided by the total number of buttons. The sum of the probabilities of picking a pink, yellow, or blue button is equal to one. This implies that the probability of not selecting a pink, yellow, or blue button is zero. In other words, one of the three colors of buttons will be selected. For instance, if there are five pink buttons, three yellow buttons, and two blue buttons in the bag, there are ten buttons in total. The probability of selecting a pink button is 5/10 or 0.5, the probability of selecting a yellow button is 3/10, and the probability of selecting a blue button is 2/10 or 0.2. The sum of these probabilities is 0.5 + 0.3 + 0.2 = 1.0.  Therefore, if someone were to select one button randomly from the bag, there is a 50% chance that the button will be pink, a 30% chance that it will be yellow, and a 20% chance that it will be blue.

Know more about calculate the probability here:

https://brainly.com/question/14382310

#SPJ11

A scanner antenna is on top of the center of a house. The angle of elevation from a point 24.0m from the center of the house to the top of the antenna is 27degrees and 10' and the angle of the elevation to the bottom of the antenna is 18degrees, and 10". Find the height of the antenna.

Answers

The height of the scanner antenna is approximately 10.8 meters.

The distance from the point 24.0m away from the center of the house to the base of the antenna.

To do this, we can use the tangent function:
tan(18 degrees 10 minutes) = h / d
Where "d" is the distance from the point to the base of the antenna.
We can rearrange this equation to solve for "d":
d = h / tan(18 degrees 10 minutes)
Next, we need to find the distance from the point to the top of the antenna.

We can again use the tangent function:
tan(27 degrees 10 minutes) = (h + x) / d
Where "x" is the height of the bottom of the antenna above the ground.
We can rearrange this equation to solve for "x":
x = d * tan(27 degrees 10 minutes) - h
Now we can substitute the expression we found for "d" into the equation for "x":
x = (h / tan(18 degrees 10 minutes)) * tan(27 degrees 10 minutes) - h
We can simplify this equation:
x = h * (tan(27 degrees 10 minutes) / tan(18 degrees 10 minutes) - 1)
Finally, we know that the distance from the point to the top of the antenna is 24.0m, so:
24.0m = d + x
Substituting in the expressions we found for "d" and "x":
24.0m = h / tan(18 degrees 10 minutes) + h * (tan(27 degrees 10 minutes) / tan(18 degrees 10 minutes) - 1)
We can simplify this equation and solve for "h":
h = 24.0m / (tan(27 degrees 10 minutes) / tan(18 degrees 10 minutes) + 1)
Plugging this into a calculator or using trigonometric tables, we find that:
h ≈ 10.8 meters

For similar question on tangent function:

https://brainly.com/question/1533811

#SPJ11

Question

A scanner antenna is on top of the center of a house. The angle of elevation from a point 24.0m from the center of the house to the top of the antenna is 27degrees and 10' and the angle of the elevation to the bottom of the antenna is 18degrees, and 10". Find the height of the antenna.

How many ways can 3 lines be arranged horizontally on a flag

Answers

A three-line horizontal arrangement of a flag can be made in five different ways.

A flag can be represented in various ways. To determine how many ways three lines can be arranged horizontally on a flag, we must first recognize that a flag is a rectangle. The three lines can be arranged horizontally in two ways.Let's try to comprehend it.

If the lines are arranged horizontally, they can either be equally spaced apart or unevenly spaced apart. There are only two ways to accomplish this:Equally spaced apart: If the lines are spaced equally apart, it means there are two spaces between them. The two lines create three spaces that are equal to one another.

So, there are two lines in a rectangle and three spaces, each of which is the same size. The number of different ways to arrange the lines is therefore 3.Unevenly spaced apart: If the lines are spaced unevenly apart, there is one tiny space and one larger space between them.

The number of distinct ways to place the lines in the larger space is the number of places to put a single line (2) multiplied by the number of ways to put the other two lines in the tiny space. So, in total, there are 2*1=2 ways.The total number of different ways to arrange three horizontal lines on a flag is therefore 3 + 2 = 5.

Therefore, the answer to the question is 5.A three-line horizontal arrangement of a flag can be made in five different ways.

Know more about horizontal here,

https://brainly.com/question/29019854

#SPJ11

Given the following perfect square trinomial, find the missing term: 4x2 ___x 49 7 14 28 36.

Answers

The missing term is 14.

The given perfect square trinomial is

4x² + ___ x + 49 and we are required to find the missing term.

The first term is the square of the square root of 4x², which is 2x.

The last term is the square of the square root of 49, which is 7.

Therefore, the middle term will be 2x × 7 = 14.

Hence, the missing term is 14.

To know more about term visit:

https://brainly.com/question/15380268

#SPJ11

Other Questions
how to get the most money from insurance for totaled car Which kind of body has a nucleus, coma, and tail?starsasteroidscometsmeteors Decompose the following function into two new functions, u and y, where v is the inside function, u(x) + x, and v(x) = x. k(x) = e3sin * + 3sin x Select all correct pairs of functions. = = = X k(x) u(v(x)) where v(x) = sin x and u(x) = et + 3x. k(x) = u(v(x)) where v(x) = 3sin x and u(x) = et + x. k(x) = u(v(x)) where v(x) = 6sin x and u(x) = e u(v(x)) where v(x) = sin x and u(x) = (3x + 3x. Ok(x) = u(v(x)) where v(x) = 3sin x and u(x) = (3x + 3x. x2 k(x) = = = let f(t) = 3 t . for a 0, find f (a). f '(a) = Use DeMoivre's Theorem to find the indicated power of the complex number. Writeanswers in rectangular form. Must show all work to get full credit!(1 - i3) Identify all expressions equivalent to 3/4 x 8 / 2 - 1 there are two naturally occurring isotopes of europium, eu (151.0 amu) and eu (153.0 amu). if the atomic mass of eu is 151.96, what is the approximate natural abundance of eu? can unions use labor arbitration to recruit new members a neutral solution of water at a particular temperature has a concentration of ph of 7.6 10 m. what is kw at this temperature? Hiring someone based on their ability and not their personal appearance is a(n) _____ choice Question 30Using the Custom Split Data function in Tableau, how is data split?Select an answer:by a worksheetby an LOD expressionby a separatorby an alias The following information was obtained from a host computer using TCPDUMP:00:05:17.176507 74.125.228.54.1270 > 64.254.128.66.25: S 2688560409:2688560409(0) win 16384 (DF) (ttl 46, id 20964) A hollow conducting sphere has an internal radius of r1 = 1. 9 cm and an external radius of r2 = 3. 1 cm. The sphere has a net charge of Q = 1. 9 nC. a) What is the magnitude of the electric field in the cavity at the center of the sphere, in newtons per coulomb? b) What is the magnitude of the field, in newtons per coulomb, inside the conductor, when r1 < r < r2? c) What is the magnitude of the field, in newtons per coulomb, at a distance r = 5. 9 m away from the center of the sphere? a sample of a noble gas has a mass of 980 mg. its volume is 0.270 l at a temperature of 88 c and a pressure of 975 mmhg. identify the gas by answering with the symbol. Air is compressed into a tank of volume 10 m 3. The pressure is 7 X 10 5 N/m 2 gage and the temperature is 20C. Find the mass of air in the tank. If the temperature of the compressed air is raised to 40C, what is the gage pressure of air in the tank in N/m 2 in kg f/cm 2 for an analog to digital converter, find the converter's sampling frequency with a nyquist rate of 2mhz when an automobile battery with an emf of 12.6 v is connected to a resistor of resistance 25.0 , the current in the circuit is 0.480 a . find the potential difference across the resistor. enough of a monoprotic weak acid is dissolved in water to produce a 0.0106 m solution. the ph of the resulting solution is 2.40. calculate the pa for the acid. Consider optical absorption. Mark the correct statement(s). Absorption can only occur if the photon energy is larger than the energy gap of a semiconductor. Absorption can only occur if the photon energy is less than the energy gap of a semiconductor. Absorption is strongest if the photon energy matches the energy difference between the centers of the valence and conduction band. Absorption is strongest if the photon energy matches the energy difference between the band edges of valence and conduction band. A stock has an expected return of 12. 9 percent and a beta of 1. 30, and the expected return on the market is 11. 80 percent. What must the risk-free rate be? (do not round intermediate calculations. Enter your answer as a percent rounded to 2 decimal places. )