what is the atomic mass of Fe?

The correct answer is:

A) 1 > 3 > 4 > 2

(Aromatic 1 is the most reactive towards electrophilic substitution, while aromatic 2 is the least reactive.)

The relative reactivity of aromatic compounds towards electrophilic substitution is determined by their ability to stabilize the positive charge that is formed during the reaction. This stability is influenced by several factors, including the number and position of electron-donating or electron-withdrawing substituents on the ring, as well as the overall aromaticity of the ring.

Aromatic 1 has an electron-donating -NH2 group, which increases the electron density on the ring and makes it more reactive towards electrophiles. Aromatic 3 has an electron-withdrawing -NO2 group, which decreases the electron density on the ring and makes it less reactive towards electrophiles than Aromatic 1, but still more reactive than Aromatics 2 and 4. Aromatic 4 has an electron-withdrawing -COOH group, which also decreases the electron density on the ring and makes it less reactive towards electrophiles than Aromatics 1 and 3. Aromatic 2 has no substituents and is the least reactive of the four.

for more questions on electrophilic substitution-

https://brainly.com/question/14803468

#SPJ4

To calculate the number of moles of salicylic acid, you need to know the mass of the sample and the molar mass of the compound.

The molar mass of salicylic acid (C7H6O3) is the sum of the atomic masses of all the atoms in the compound, which can be calculated using the periodic table of elements. The molar mass of the salicylic acid is:

(7 x 12.01 g/mol) + (6 x 1.01 g/mol) + (3 x 16.00 g/mol) = 138.12 g/mol

Once you have the molar mass of salicylic acid, you can use the following formula to calculate the number of moles:

Number of moles = Mass of sample (in grams) / Molar mass (in grams per mole)

For example, if you have a sample of salicylic acid that weighs 1.5 grams, you can calculate the number of moles as follows:

Number of moles = 1.5 g / 138.12 g/mol = 0.0109 moles

Therefore, the sample contains 0.0109 moles of salicylic acid.

To know more about moles here

https://brainly.com/question/26416088

#SPJ4

The molecular geometry of silicon dioxide is linear and bonding in it  is covalent due to which it is a suitable material for making welding blankets.

Molecular geometry is  defined as a three -dimensional arrangement of atoms which make up  the molecule.It includes parameters such as bond length,bond angle and torsional angles.

It influences many properties of molecule such as reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.

Learn more about molecular geometry,here:

https://brainly.com/question/28557524

#SPJ9

Four of the valencies on the tetrahedron of carbon point in the directions of its four angles. The tetrahedron's core is made up of carbon atoms. Each valency has a 10928′ bond angle.

To learn more about carbon atom refer to:

https://brainly.com/question/27860158

#SPJ4

1) The theoretical yield is 18.02 g

2) The percent yield is 67%

3) The percent yield is  55.8 %

The balanced reaction equation is;

N2 + 3H2 ----> 2NH3

Number of moles of N2 = 15g/28 g/mol = 0.53 moles

If 1 moles of N2 produced 2 moles of NH3

0.53 moles of N2 will produce 0.53 * 2/1

= 1.06 moles

Theoretical yield = 1.06 moles * 17 g/mol

= 18.02 g

The percent yield = 12.1/18.02 * 100/1

= 67%

The percent yield = 19.8 g/35.5 g * 100/1

= 55.8 % as shown

Learn more about theoretical yield:https://brainly.com/question/14966377

#SPJ1

Here's a table that classifies the objects based on their physical properties:

Object            Property

Rubber bands   Elasticity

Wood chips    Hardness

Straight pins    Sharpness

Aluminum foil    Malleability

Glass beads   Smoothness

Physical properties are characteristics that describe the basic nature of an object, such as its shape, size, texture, and other observable features, without reference to its composition.

The physical properties listed in the table are just a few examples of the ways in which these objects can be described and classified based on their physical characteristics.

Learn more about Physical properties at:

https://brainly.com/question/11445521

#SPJ1

The empirical formula of oxalic acid is CHO₂. The molecular mass is 90 g/mol. Then, its molecular formula is C₂H₂O₄.

The empirical formula of a compound is derived from the number of moles of each element present and converting their ratio of number of moles into whole numbers.

The molecular formula is derived by dividing the molecular mass by the formula mass and multiply the empirical formula with the obtained integer.

Given mass  of carbon =1.94 g

no.of moles = 1.94/12 = 0.161

mass of H = 0.160

no.of moles  = 0.160

mass of oxygen = 5.16 g

no.of moles = 5.16 g/16 = 0.322

Now, divide the ratio by 0.160 to convert them to whole numbers, we get the empirical formula CHO₂.

Given molar mass = 90 g/mol

Formula mass = 12 + 1 + 32  = 45 g

then, 90/45 = 2

multiply the formula mass by 2 we get the molecular formula, C₂H₂O₄.

Find more on molecular formula:

brainly.com/question/28647690

#SPJ9

Calcium carbonate( [tex]CaCO_{3}[/tex] )appears as white, odorless powder or colorless crystals. Practically insoluble in water.

[tex]CaCO_{3}[/tex] is the chemical formula for calcium carbonate, an inorganic substance. Calcite is another name for it. It is located in the earth's crust. It comes in a wide variety of shapes, including marble and limestone. It is a non-toxic, odourless gas that is typically found as a white mineral in marbles, chalks, and limestones. Eggshells, seashells, oyster shells, snail shells, corals, etc. all contain this chemical as their primary ingredient.

Strong ionic substance that contains calcium carbonate. The atoms are bound together very tightly because of the extremely strong electrostatic force of attraction. It becomes challenging to sever the bonds because of how powerful these attractions are. When calcium carbonate is dissolved in water, this is what happens.

Bonds being very strong do not break, leading to calcium carbonate being insoluble in water. Moreover ionization of calcium carbonate is not taking place in water. And so calcium carbonate is insoluble in water.

know more about soluble in water click here;

https://brainly.com/question/29857840

#SPJ4

The examples of symbols that can be used include

"+" for addition

"-" for subtraction

"*" or "×" for multiplication

"/" or "÷" for division

"%" for percentage

"$" for dollars

"#" for number (e.g. #1 = number one)

"&" for and

"!" for exclamation or negation.

A mark, sign, or term that denotes, denotes, or is taken to denote an idea, an item, or a relationship is known as a symbol. By connecting seemingly unrelated ideas and events, symbols help people look beyond the known and the visible.

Symbols are used to communicate ideas and beliefs by using words, noises, gestures, thoughts, or visual representations.

Learn more about symbol on:

https://brainly.com/question/29886201

#SPJ1

To select the appropriate pipette for each of the following volumes are P1000,  P20, P200, microsyringe.

A. 874 uL (microliters) - A P1000 pipette would be appropriate for this volume. P1000 pipettes can dispense volumes ranging from 100 μL to 1000 μL.

B. 57 uL (microliters) - A P20 pipette would be appropriate for this volume. P20 pipettes can dispense volumes ranging from 2 μL to 20 μL.

C. 340 uL (microliters) - A P1000 pipette or a P200 pipette would be appropriate for this volume. P1000 pipettes can dispense volumes ranging from 100 μL to 1000 μL, and P200 pipettes can dispense volumes ranging from 20 μL to 200 μL. Since the volume is closer to 200 μL, a P200 pipette might be more appropriate in this case.

D. 15 pL (picoliters) - A microsyringe with a nanoliter or picoliter volume range would be appropriate for this volume. Microliter syringes are not appropriate for volumes in the picoliter range. The appropriate syringe size would depend on the accuracy and precision required for the experiment.

To know more about pipette here

https://brainly.com/question/28522043

#SPJ4

Each different signal in a 1H NMR spectrum represents a different chemical environment of hydrogen atom. Hydrogen atoms that are in the same chemical environment or have the same electronic and structural environment give the same signal in the NMR spectrum.

Write a note on this phenomenon of the NMR spectrum.

This is because the resonance frequency of a hydrogen nucleus is affected by the local magnetic field, which in turn is influenced by the electronic and structural properties of the molecule surrounding the hydrogen atom. By analyzing the number, intensity, and splitting pattern of the signals in the 1H NMR spectrum, it is possible to obtain valuable information about the structure and composition of a molecule or compound.

Hence, the answer is, Each different signal in a 1H NMR spectrum represents a different chemical environment of hydrogen atom. Hydrogen atoms that are in the same chemical environment or have the same electronic and structural environment give the same signal in the NMR spectrum.

To learn more about 1H NMR spectrum, follow the link:

https://brainly.com/question/29389817

#SPJ4

When m-xylene is brominated with bromine while ferric bromide is present, the product is 1-bromo-2,4-dimethylbenzene.

M-bromonitrobensene is the main product created when nitrobenzene is treated with [tex]$$Br_2[/tex] in the presence of [tex]$\mathrm{FeBr}_3$[/tex].

If [tex]$\mathrm{FeBr}_3$[/tex] or [tex]$$AlBr_3[/tex] are not added to produce the electrophile Br+, benzene will not react with [tex]$$Br_2[/tex] ([tex]$\mathrm{FeCl}_3$[/tex] and [tex]$$AlCl_3[/tex] can also be used, but may contaminate the products with chlorine). There won't be any reaction if the metal chloride is absent, hence there won't be any colour change.

When m-xylene is brominated with bromine while ferric bromide is present, the product is 1-bromo-2,4-dimethylbenzene. Since methyl groups are ortho para directing, the replacement takes place at a site that is ortho to one methyl group and para to another methyl group in this electrophilic aromatic substitution reaction.

The complete question is:

What product are formed when the following compound is treated with [tex]$\mathrm{Br}_2$[/tex] in the presence of [tex]$\mathrm{FeBr}_3$[/tex]?

To learn more about compound refer to:

https://brainly.com/question/26487468

#SPJ4

Answer:

the answer is D.

Explanation:

The presence of a lone pair on the oxygen atom makes OH a good leaving group.

A good leaving group is a molecular fragment that can depart from the substrate without undergoing rearrangement or reacting further. In general, the ability of a group to act as a leaving group depends on its stability after leaving. The stability of a leaving group is often enhanced by the inductive and resonance effects of nearby functional groups.

In the case of OH, its lone pair can act as a nucleophile and participate in reactions, but it can also be delocalized via resonance with the adjacent atoms. However, upon protonation, the O-H bond becomes polarized and the oxygen atom becomes a better leaving group.

To know more about the OH, here

https://brainly.com/question/2911201

#SPJ4

The Ser is an amino acid that participates in the chymotrypsin mechanism's nucleophilic assault.

To learn more about amino acid refer to:

https://brainly.com/question/24106148

#SPJ4

To dilute the 0.200 M HCl solution to 0.150 M solution, 166.67 mL of water is needed to be added to the solution.

To dilute a solution, we can use the dilution equation:

M₁V₁ = M₂V₂

where M₁ and V₁ are the initial molarity and volume of the solution, and M₂ and V₂ are the final molarity and volume of the solution after dilution.

In this case, we are given M₁ = 0.200 M, V₁ = 500 mL, and M₂ = 0.150 M. We need to solve for V₂ to find the final volume of the solution after dilution, and then subtract V₁ from V₂ to find the amount of water that needs to be added.

0.200 M × 500 mL = 0.150 M × V₂

V₂ = (0.200 M × 500 mL) / 0.150 M

V₂ = 666.67 mL

So, the final volume of the solution after dilution should be 666.67 mL.

To find the amount of water that needs to be added, we can subtract the initial volume from the final volume:

666.67 mL - 500 mL = 166.67 mL

Therefore, we need to add 166.67 mL of water to the 500 mL of 0.200 M HCl solution to dilute it to a 0.150 M solution.

Learn more about dilution here: https://brainly.com/question/24881505.

#SPJ11

The prefix that is added to the word autotroph to denote organisms which can use inorganic compounds in the environment to fix carbon dioxide with hydrogen atoms to make organic molecules is: "chemo-"

As per the question given,  

Have you ever wondered how some organisms survive in extreme environments where sunlight is scarce or absent? Well, there are certain organisms called autotrophs that are capable of producing their own food using inorganic substances through the process of photosynthesis. However, some autotrophs have taken it a step further and developed a unique ability to use inorganic compounds in their environment to produce organic molecules.

This process is known as chemosynthesis, and it is vital for the survival of certain organisms in environments like deep-sea hydrothermal vents, where sunlight cannot penetrate. The prefix that is added to the word autotroph to denote these organisms is "chemo-", which signifies the use of energy from inorganic chemical reactions instead of light energy. Chemoautotrophs are truly fascinating organisms that have adapted to survive in some of the harshest environments on our planet!

For such more questions on Atoms

https://brainly.com/question/6258301

#SPJ4

For 2g of magnesium: 3.31 g

For 10g of magnesium: 16.59 g

For 4kg of magnesium: 6.63 kg

The balanced chemical equation for the reaction is:

2 Mg + O2 → 2 MgO

The balanced chemical equation for the reaction is:

2 Mg + O2 → 2 MgO

From the equation, we can see that 2 moles of magnesium react with 1 mole of oxygen to produce 2 moles of magnesium oxide. Therefore, we can calculate the amount of magnesium oxide produced for each given mass of magnesium as follows:

Moles of Mg = mass / molar mass = 2g / 24.31 g/mol = 0.0823 mol

Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 0.0823 mol x 1 = 0.0823 mol

Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 0.0823 mol x 40.31 g/mol = 3.31 g

Moles of Mg = mass / molar mass = 10g / 24.31 g/mol = 0.4116 mol

Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 0.4116 mol x 1 = 0.4116 mol

Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 0.4116 mol x 40.31 g/mol = 16.59 g

Moles of Mg = mass / molar mass = 4000g / 24.31 g/mol = 164.47 mol

Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 164.47 mol x 1 = 164.47 mol

Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 164.47 mol x 40.31 g/mol = 6626.95 g or 6.63 kg

Calculation of Formula of Iron Oxide Produced:

According to the given information, 0.4 moles of iron reacts with 0.3 moles of oxygen gas. To determine the formula of the iron oxide produced, we need to first balance the chemical equation.

Fe + O2 → FeO

From the balanced equation, we can see that 1 mole of iron reacts with 1 mole of oxygen to produce 1 mole of iron oxide. Therefore, the ratio of moles of iron to moles of oxygen in the reaction is 1:1.

To do this, we can calculate the theoretical amount of moles of oxygen required to react completely with 0.4 moles of iron:

0.4 mol Fe × (1 mol O2 / 1 mol Fe) = 0.4 mol O2

Learn more on balanced chemical equation here

https://brainly.com/question/11904811

#SPJ1

The internal energy change for this reaction is +1730 J.

What is internal energy?

Internal energy is the total energy contained within a system, including the kinetic and potential energies of its particles (atoms, molecules, ions, etc.). It is a state function that depends only on the current state of the system, including its temperature, pressure, volume, and composition.

The internal energy change (ΔU) for this reaction can be calculated using the first law of thermodynamics:

ΔU = Q - W

where Q is the heat released to the surroundings, and W is the work done by the gases.

Substituting the given values, we get:

ΔU = 2290 J - 560 J

ΔU = 1730 J

Therefore, the internal energy change for this reaction is +1730 J.

To learn more about internal energy:

https://brainly.com/question/17136958

#SPJ4

The Cis isomers are the molecules with the same connectivity of the atoms. The Trans isomers is the molecules with the same side of the groups placed on the opposite sides of the double bond.

The Cis isomers are the molecules that have the same connectivity of the atoms. The feature is the same side of the groups placed on the same side of the double bond. The  Trans isomers are the the molecules with same side of the groups placed on the opposite sides of the double bond.

Cis isomers are almost the polar compound. The Trans isomers are not the very polar one. Many of the trans isomers are the  non-polar molecules.

To learn more isomers here

https://brainly.com/question/12796779

#SPJ4

Answer:

water molecules

Explanation:

Osmosis is the movement of water molecules from a solution of higher concentration to a solution of lower concentration.

Hope it helps..

The lewis structure of the nitrogen is as follows :

      ..

    . N :

The atomic number of the nitrogen is 7. The electronic configuration of the nitrogen is as follows :

The electronic configuration of the nitrogen atom is 1s² 2s² 2p³.

the total number of the valence electrons that is the electrons in the outermost shell is 5. In the lewis structure of the nitrogen the valence electron are represented by the dot . therefore the lewis structure also be called the electron dot structure. Thus, the electron dot structure of the nitrogen is as follows :

    ..

    . N :

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

Answer:There are three subatomic particles: protons, neutrons and electrons. Two of the subatomic particles have electrical charges: protons have a positive charge while electrons have a negative charge. Neutrons, on the other hand, don't have a charge.

Explanation:

Proton A couples to Proton B. Proton A posseses a J -value of 3.0 Hz. What do you expect the J -value Proton B posseses to be 3.0 Hz. The correct answer is D.

In freely rotating groups, protons in anti-conformation have a frequency range of J= 5–12 Hz while those in gauche conformation have a range of J= 2-4 Hz. Option D is correct as a result.

The J value of a quartet may always be determined by counting the distances between the various lines. When working with actual data, it is preferable to utilize the average line spacing, which is determined by dividing the distance between the first and last lines by three.

The coupling constant, usually denoted as J, is used to calculate the strength of the interaction between a pair of protons in an atom.

It is designated by the letter "J" with frequency units and is mostly used to measure the interaction or strength of the splitting effect (Hz).

In the simplest case, the coupling constant for a doublet is equal to the difference between its two peaks.

As a result, Proton B has a J-value of 3.0 Hz.

Your question is in complete but most probably your full question was

Proton A couples to Proton B. Proton A posseses a J-value of 3.0 Hz. What do you expect the J-value Proton B posseses to be? a) Less than 3.0 Hz b) Greater than 3.0 Hz c) No J-value because coupling is only one-way d) 3.0 Hz

Learn more about Proton here:

brainly.com/question/1252435

#SPJ4

The type of polyester that is formed in the reaction between glycerol and phthalic anhydride is known as glyceryl phthalate, or GP for short.

GP is a condensation polymer that is formed by the reaction of glycerol and phthalic anhydride. The reaction involves the formation of ester bonds between the hydroxyl groups of glycerol and the carboxylic acid groups of phthalic anhydride. The resulting polymer has good flexibility, softness, and low toxicity, which make it useful for certain applications, such as in the production of plasticizers for PVC.

However, glyceryl phthalate is not as widely used as other polyesters like polyethylene terephthalate (PET), which is formed from the reaction of ethylene glycol and terephthalic acid, and has much broader applications.

To know more about the phthalic anhydride, here

brainly.com/question/12972518

#SPJ4

The value of 0.0098 g in micrograms using dimensional analysis is 98 micrograms.

Dimensional analysis is a mathematical technique used to translate measuring units across different systems.

To convert 0.0098 g to micrograms, we can use dimensional analysis by multiplying the given weight in grams by a conversion factor.

The conversion factor that can be used is 1 microgram = 10⁻⁶ g.

Using this conversion factor, we can write the following equation:

0.0098 g = 0.0098 g * (10⁶6 µg/1 g)

0.0098 g = 98 µg

Therefore, 0.0098 g is equal to 98 micrograms.

Learn more about dimensional analysis at: https://brainly.com/question/27931891

#SPJ1

The human body is composed of a diverse set of elements, but only a few of them make up the majority of its mass. The two major components of the human body, making up at least 3% each, are oxygen (O) and carbon (C).

Oxygen is the most abundant element in the human body, comprising about 65% of the total mass. It is essential for the body's metabolic processes, as it is a major component of many organic molecules, including carbohydrates, lipids, and proteins. Oxygen is also necessary for respiration, as it is used in the production of energy through the process of cellular respiration.

Carbon is the second most abundant element in the human body, making up about 18% of its total mass. It is the backbone of many organic molecules, such as carbohydrates, lipids, and proteins, and is the basis of all life on Earth. Carbon is also found in many minerals in the human body, such as calcium carbonate, which makes up bones and teeth.

Other elements that are present in the human body in smaller amounts include hydrogen (H), nitrogen (N), calcium (Ca), and phosphorus (P). Hydrogen is the most common element in the universe and is present in many organic molecules. Nitrogen is also found in organic molecules, such as amino acids and nucleic acids, and is essential for building and repairing tissue. Calcium and phosphorus are both important for building strong bones and teeth.

In summary, oxygen and carbon are the two major components of the human body, making up at least 3% each. These elements are essential for the body's metabolic processes, energy production, and the formation of organic molecules. While other elements are present in smaller amounts, they are also essential for the body's overall health and well-being.

To know more about human body: https://brainly.com/question/11738302

#SPJ4

The 1.375 g sample of sugar found seaweed, is burned completely in oxygen to give 1.993 g of carbon dioxide and 0.9519 g of water . The empirical formula of this sugar  is C₃H₇O₃.

Moles of the C in the carbon dioxide = 1 ( 1.933/ 44)

Moles of the  C in the carbon dioxide = 0.0453 mol

Moles of the H in the water = 2 ( 0.9519 / 18 )

Moles of the H in the water = 0.106 mol

Mass of the oxygen = 1.375 - (0.0453 ×12 ) - 0.016 × 1

Mass of the oxygen = 0.724 g

The moles of the oxygen = mass / molar mass

                                          = 0.724 / 160

                                           = 0.0453 mol

Dividing by the smallest one , we get :

C = 1

H = 2.3

O = 1

Multiplying by three , we get :

The empirical formula is C₃H₇O₃.

To learn more about empirical formula here

https://brainly.com/question/14044066

#SPJ4

The stoichiometric ratio between the 20 mg band reactant and the  Product hydrogen gas is 1:1/2, simply 2:1. This means that 2 atoms of hydrogen are produced for every 1 atom of zinc consumed in the reaction.

What is Stoichiometric Coefficient?

A stoichiometric coefficient is a number that appears in front of a chemical species in a balanced chemical equation, representing the number of moles of that species that react or are produced in the reaction. These coefficients are used to ensure that the law of conservation of mass is obeyed in a chemical reaction, and that the same number and types of atoms are present on both sides of the equation.

The reaction used to determine the molar volume of a gas is typically the reaction between a metal and an acid to produce hydrogen gas, which is collected and measured. The stoichiometric ratio between the reactants and products in this reaction is:

metal + acid → salt + hydrogen gas

The balanced chemical equation for the reaction between zinc metal and hydrochloric acid is:

Zn + 2 HCl → ZnCl2 + H2

From this equation, we can see that 1 mole of zinc reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas. The molar mass of zinc is 65.38 g/mol, which means that 1 mole of zinc has a mass of 65.38 g. Therefore, 20 mg (0.02 g) of zinc is equivalent to:

0.02 g / 65.38 g/mol = 3.06 x 10^-4 moles of zinc

According to the stoichiometry of the reaction, 1 mole of zinc reacts with 1/2 mole of hydrogen gas. Therefore, the amount of hydrogen gas produced from 3.06 x 10^-4 moles of zinc is:

1/2 x 3.06 x 10^-4 moles = 1.53 x 10^-4 moles of hydrogen gas

So the stoichiometric ratio between the 20 mg band reactant and the product hydrogen gas is 1:1/2, or simply 2:1. This means that 2 atoms of hydrogen are produced for every 1 atom of zinc consumed in the reaction.

Learn more about  Stoichiometric Coefficient from given link

https://brainly.com/question/6666875

#SPJ4