what is the cation of Al2(SO4)3

Five properties that make acids different from bases include their pH, conductivity, taste, texture, and reactivity.

The names of the given acids and bases are:

1. Hydrogen fluoride

2. Potassium hydroxide

3. Hydrogen sulfate

4. Calcium hydroxide

5. Barium hydroxide

6. Hydrogen nitroxide

7. Barium hydroxide

8. Hydrogen sulfide

9. Aluminum hydroxide

10. Dihydrogen phosphate

Acids can be differentiated from bases by their taste, pH, texture, reactivity, etc. Acids typically have a sour taste while bases have a bitter taste. Acids also have a pH less than 7while bases have a pH greater than 7.

Acids and bases also differ in their texture. Acids have a sticky texture while bases have a slippery texture. The conductivity of acids is also greater than those of bases.

Learn more about acids and bases here:

https://brainly.com/question/9836972

#SPJ1

Answer: copper hydroxide

Explanation:

Copper(II) hydroxide is the hydroxide of copper with the chemical formula of Cu(OH)2. It is a pale greenish-blue or bluish-green solid. Some forms of copper(II) hydroxide are sold as "stabilized" copper(II) hydroxide, although they likely consist of a mixture of copper(II) carbonate and hydroxide.

Example:

2NaOH+CuSO4→Na2SO4+Cu(OH)2

Answer:

i dont know sorry, hope you get the answer•

The sample that uses the substance that Jacob and Natalie should use to make a cold pack that will do the best job of keeping food cool is sample 2, because it absorbs the most energy (option B).

Endothermic refers to a chemical reaction that absorbs heat energy from its surroundings. This ensures that the temperature of the surroundings is cool or has a lower temperature.

According to this question, Jacob and Natalie are asked by their science teacher to design a warming or cooling device. They make use of certain substances, however, sample 2 has the lowest final temperature of -4°C.

This shows that sample 2 absorbs the most energy, hence, would be the best for keeping the food cool.

The incomplete question is as follows:

Jacob and Natalie are asked by their science teacher to design a warming or cooling device. They decide to design a cold pack that can be used to help keep food cool. Jacob and Natalie read about different substances that can be used inside cold packs and learn that most cold packs use endothermic reactions to cool objects.

Learn more about endothermic at: https://brainly.com/question/28909381

#SPJ1

The steps are;

Determine the titration reaction equation

Perform the titration

Record the data

Calculate the concentration

Find the chemical equation for the reaction that takes place during the titration.

Swirl or stir the analyte solution continually as you gradually add the titrant from the burette. An indication may be used to pinpoint the reaction's endpoint once the titrant and analyte react.

To calculate the amount of titrant utilized in the reaction, take note of the initial and final burette readings.  To calculate the ratio between the titrant and the analyte, use the stoichiometry of the balanced chemical equation.

Learn more about titration lab:https://brainly.com/question/29276192

#SPJ1

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality.

Thus, Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

While water with more free hydroxyl ions is basic, water with more free hydrogen ions is acidic. Since chemicals in the water can change pH, pH is a crucial sign that the chemical composition of the water is changing. "Logarithmic units" are used to report pH.

Each number corresponds to a 10-fold difference in the water's acidity or basicity. Ten times more acidic than water is water is water with a pH of five.

The pH scale determines how basic or acidic a substance is. We consume a variety of drinks with varying pH levels during our daily lives. A neutral material is water. The acidity of soda and coffee varies.

Thus, The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality.

Learn more about pH, refer to the link:

https://brainly.com/question/2288405

#SPJ1

Answer: 78.59 lb/ft

Explanation:

use stoichiometry to solve

1.26g/cm x ( 1pound/ 454 grams) X (28317 Cm/1 ft) =  78.59 pounds/ft

The approximate mass of CO2 dissolved in the alcoholic drink is 832.5 grams.

To calculate the approximate mass of CO2 dissolved in the alcoholic drink, we need to consider the mole fraction of water and the composition of the solution.First, let's determine the number of moles of water and ethanol in the solution:

Molar mass of H2O = 18.02 g/mol

Number of moles of H2O = mass of H2O / molar mass of H2O = 216.0 g / 18.02 g/mol = 11.994 mol

Molar mass of C2H5OH = 46.07 g/mol

Number of moles of C2H5OH = mass of C2H5OH / molar mass of C2H5OH = 9.2 g / 46.07 g/mol = 0.1998 mol

Next, we can calculate the mole fraction of ethanol:

Mole fraction of ethanol = (moles of C2H5OH) / (moles of H2O + moles of C2H5OH) = 0.1998 mol / (11.994 mol + 0.1998 mol) = 0.0164

Since the mole fraction of water is given as 0.9, we can calculate the mole fraction of CO2:

Mole fraction of CO2 = 1 - (mole fraction of water + mole fraction of ethanol) = 1 - (0.9 + 0.0164) = 0.0836

Now, we need to determine the mass of CO2 dissolved in the solution. Assuming ideal behavior, we can use Raoult's law to calculate the approximate mass of CO2:

Mass of CO2 = (mole fraction of CO2) * (molar mass of CO2) * (total mass of the solution)

           = 0.0836 * 44.01 g/mol * (216.0 g + 9.2 g)

           = 0.0836 * 44.01 g/mol * 225.2 g

           ≈ 832.5 g

for such more questions on mass

https://brainly.com/question/24191825

#SPJ8

Thomson's experimental evidence supports Rutherford's atomic model, as it aligns with the observed behavior of the cathode rays in the cathode ray tube experiment

Thomson's experiment, known as the cathode ray tube experiment, involved passing an electric current through a partially evacuated tube and observing the behavior of the cathode rays. Thomson discovered that the cathode rays were negatively charged particles, which later came to be known as electrons. Based on Thomson's experimental evidence, it is compatible with Rutherford's model, which proposed a dense positively charged nucleus and negatively charged electrons. Thomson's experiment indicated the presence of negatively charged particles (electrons) and their deflection towards the positively charged plate, supporting the idea of a small, dense, positively charged nucleus within the atom. In summary, Thomson's experimental evidence supports Rutherford's atomic model, as it aligns with the observed behavior of the cathode rays in the cathode ray tube experiment. The experiment provided strong evidence for the existence of negatively charged electrons within atoms and the presence of a small, dense, positively charged nucleus.

for more questions on Rutherford's
https://brainly.com/question/30087408
#SPJ8

Mescaline produces a wide range of psychoactive effects when ingested, including altered perception of reality, hallucinations, and euphoria. It is a powerful psychedelic drug that has been used for centuries by Native American tribes in spiritual ceremonies

Mescaline is a hallucinogenic alkaloid that is derived from the Peyote cactus. Mescaline is a complex organic molecule that can be synthesized in the laboratory from 3,4,5-trimethoxybenzyl bromide in two steps.The first step involves nucleophilic substitution using sodium cyanide, and the second step is a reduction using lithium aluminum hydride (LAH).Here's how mescaline can be synthesized from 3,4,5-trimethoxybenzyl bromide:Step 1: Nucleophilic substitution using sodium cyanideThe reaction of 3,4,5-trimethoxybenzyl bromide with sodium cyanide results in the formation of the nitrile derivative. NaCN serves as the nucleophile in this reaction, and it replaces the bromide ion.The mechanism for this reaction involves the following steps: A nucleophilic attack by the cyanide ion on the benzyl bromide. The carbon-bromine bond breaks, and the benzyl cation is formed. A second nucleophilic attack by the cyanide ion occurs on the benzyl cation, resulting in the formation of the nitrile derivative.Here's the reaction equation for this step:Step 2: Reduction using lithium aluminum hydrideThe next step is the reduction of the nitrile derivative using LAH. LAH serves as a strong reducing agent in this reaction and reduces the nitrile derivative to the amine. The mechanism for this reaction involves the following steps: A nucleophilic attack by LAH on the nitrile derivative. This results in the formation of an imine intermediate. The imine intermediate reacts with another LAH molecule, resulting in the formation of the amine.Here's the reaction equation for this step:Mescaline structure: Mescaline is a psychoactive compound that belongs to the phenethylamine class of alkaloids. The structure of mescaline is as follows: The molecule has three methoxy groups attached to the benzene ring, and it has an amine functional group. The molecule is a white crystalline powder that is soluble in water and alcohol.

for such more questions on psychoactive

https://brainly.com/question/30551262

#SPJ8

Considering the definition of pH, the pH is 6.35 and the solution is acidic.

pH is the Hydrogen Potential and it is a measure of acidity or alkalinity. pH indicates the amount of hydrogen ions present in a solution or substance.

Mathematically, pH is calculated as the negative base 10 logarithm of the activity of hydrogen ions:

pH= - log [H⁺]

The numerical scale that measures the pH of substances includes the numbers from 0 to 14. The pH value 7 corresponds to neutral substances. Acidic substances are those with a pH lower than 7, while basic substances have a pH higher than 7.

In this case, being [H⁺]=4.5×10⁻⁷ M, you can replace this value in the definition of pH:

pH= -log (4.5×10⁻⁷ M)

Solving:

pH= 6.35

Finally, the pH is lower than 7, the solution is acidic.

Learn more about pH:

brainly.com/question/3992824

#SPJ1

You can determine  the number of electrons it has in the highest occupied energy level. Option A

Representative elements are found in Groups 1, 2, and 13-18 of the periodic table. The group number corresponds to the number of valence electrons, which are the electrons in the outermost energy level.

For example, elements in Group 1 have one valence electron, while elements in Group 18 have eight valence electrons (except helium, which has two). Knowing the group number helps predict the element's chemical properties, as valence electrons play a significant role in chemical reactions and bonding.

Information regarding the total number of electrons (B), the number of filled energy levels (C), and the number of protons and neutrons in the nucleus (D) cannot be determined from just the group number.

However, you can use the element's atomic number and electron configuration to find this information. The atomic number represents the total number of protons and electrons in an atom, while electron configuration illustrates the distribution of electrons in energy levels. Option A

For more such questions on energy level visit:

https://brainly.com/question/20561440

#SPJ11

Answer:

Orientation

Explanation:

The mass (in grams) of sodium carbonate, Na₂CO₃ required to produce 85 grams of barium carbonate, BaCO₃ is 45.7 grams

First, we shall observe the balanced equation to obtain useful information. This is shown below:

Na₂CO₃ + BaSO₄ -> BaCO₃ + Na₂SO₄

From the balanced equation above,

197 g of BaCO₃ were obtained from 106 g of Na₂CO₃

With the above information, we can obtain the mass of sodium carbonate, Na₂CO₃ required to produce 85 grams of barium carbonate, BaCO₃. This is illustrated below:

From the balanced equation above,

197 g of BaCO₃ were obtained from 106 g of Na₂CO₃

Therefore,

85 g of BaCO₃ will be obtain from = (85 × 106) / 197 = 45.7 g of Na₂CO₃

Thus, we can conclude from the above calculation that the mass of sodium carbonate, Na₂CO₃ required is 45.7 grams

Learn more about mass needed:

https://brainly.com/question/29263739

#SPJ1

The scientist who wrote the Book of Optics is In al-Haytham.

option B.

The Book of Optics presented experimentally founded arguments against the widely held extramission theory of vision (as held by Euclid in his Optica), and proposed the modern intromission theory, the now accepted model that vision takes place by light entering the eye.

The Book of Optics is a seven-volume treatise on optics and other fields of study composed by the medieval Arab scholar Ibn al-Haytham, known in the West as Alhazen or Alhacen.

Thus, the scientist who wrote the Book of Optics is In al-Haytham.

Other options such as Warren Washington, Christian Doppler and Galileo Galilei are not correct.

Learn more about optics here: https://brainly.com/question/12969591

#SPJ1

To calculate the molarity of the sodium hydroxide (NaOH) solution, we need to perform a titration with a standardized solution of hydrochloric acid (HCl). Here is the numerical setup for calculating the molarity of the NaOH solution:

Measure the volume of the HCl solution used in the titration. Let's say you used 25.0 mL of 0.100 M HCl.

Calculate the number of moles of HCl used in the titration: moles of HCl = M x V = 0.100 mol/L x 0.0250 L = 0.00250 mol.

Use the balanced chemical equation for the reaction between HCl and NaOH to determine the number of moles of NaOH that reacted with the HCl. The balanced chemical equation is:

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)

Since the stoichiometry of the reaction is 1:1 between HCl and NaOH, the number of moles of NaOH that reacted is also 0.00250 mol.

4. Determine the volume of NaOH used in the titration. Let's say you used 30.0 mL of NaOH solution.

Calculate the molarity of the NaOH solution: Molarity of NaOH = moles of NaOH / volume of NaOH solution (in L) = 0.00250 mol / 0.0300 L = 0.0833 mol/L.

To determine the total volume of HCl(aq) and NaOH(aq) used in the titration, simply add together the volumes of HCl and NaOH that were used. In this example, the total volume would be 25.0 mL + 30.0 mL = 55.0 mL.

Learn more about titration, here;

https://brainly.com/question/31271061

#SPJ1

Answer:

What is meant by activated complex?

The state of the particles that is in between the reactants and products is called the activated complex. An activated complex is an unstable arrangement of atoms that exists momentarily at the peak of the activation energy barrier.

source:Gogle

Coal supplies the energy for the majority of the power that people use today, and everyone benefits, either directly or indirectly, from the usage of coal. Option A is correct.

Coal is a significant source of energy for electricity generation, and electricity is a fundamental component of modern society. The electricity produced by coal benefits everyone, either directly or indirectly. It powers homes, businesses, and industries and provides the power necessary for transportation, communication, and other essential services.

However, the use of coal can also have negative impacts on the environment and human health, including air and water pollution, greenhouse gas emissions, and coal mining accidents. It is crucial to balance the benefits and drawbacks of coal use and consider alternative sources of energy to meet the increasing energy demands sustainably. Option A is correct.

To know more about the Electricity, here

https://brainly.com/question/31659991

#SPJ1

Answer:

C. polar nature

Explanation:

The polarity of water and its ability to hydrogen bonding contributes to it's unique properties

Yes, elements in the 7th period of the periodic table can experience the inert pair effect. The inert pair effect is observed when the valence s-electrons of heavier elements (particularly in Groups 13-15) are less likely to participate in chemical bonding compared to their p-electrons.

This effect becomes more pronounced as you move down the periodic table.In the 7th period, elements such as polonium (Po), astatine (At), and tennessine (Ts) exhibit the inert pair effect. This is due to the increasing size of the atoms and the relativistic effects that come into play at higher atomic numbers.

The increased size and relativistic effects cause the s-electrons to be more strongly influenced by the attractive force of the positively charged nucleus, making them less available for bonding.

As a result, elements experiencing the inert pair effect tend to exhibit oxidation states lower than what might be expected based on their position in the periodic table. This effect has significant implications for the chemical behavior and reactivity of these elements.

For more such questions on periodic table

https://brainly.com/question/12781141

#SPJ11

The type of aluminum the students should plan to use in order to increase the reaction rate is powder because the greater surface area will allow more collisions between reactants to occur.

The correct option is A.

The nature of the surface area of the reactants will either decrease or increase the rate of reaction.

An increased surface area of the reactants will increase the rate of a reaction because the greater surface area will allow more collisions between reactants to occur.

A decrease in the surface area of the reactants will decrease the rate of a reaction because the greater surface area will not allow more collisions between reactants to occur.

Learn more about the surface area of reactants at: https://brainly.com/question/31359857

#SPJ1

The mass of the vinegar the student put in the flask at first is 18 grams.

To find the mass of the vinegar, you have to consider the law of conservation of mass.

Ths law says that the total mass of the reactants before a chemical reaction is equal to the total mass of the products after the reaction.

Therefore

Mass of vinegar = Total mass after reaction - (mass of flask + mass of balloon with baking soda)

= 125 grams - (100 grams + 7 grams)

= 18 grams

Find more exercises on finding mass;

https://brainly.com/question/16885872

#SPJ1

An error during DNA replication would create a gene mutation.

During DNA replication, the genetic information in a cell is copied to make new DNA molecules. However, mistakes can occur during this process, leading to changes in the DNA sequence, which can result in a mutation. Mutations can also be caused by exposure to environmental factors, such as radiation or chemicals, which can damage the DNA molecule directly or affect the cellular processes involved in DNA replication.

Mutations can have a variety of effects on the organism, ranging from no effect to causing serious health problems or even death. Gene mutations can also be inherited from a parent, which can result in genetic disorders or predisposition to certain diseases. Therefore, it is important to understand the mechanisms of gene mutations and their potential impacts on organisms.

To know more about the Gene mutation, here

https://brainly.com/question/15448555

#SPJ1

Answer:

LiOH is soluble. Na2CO3 is soluble. Cu(OH)2 is insoluble.

Explanation:

LiOH is soluble. Na2CO3 is soluble. Cu(OH)2 is insoluble.

The number that is the same as the exponentiation given as follows: 2.5 × 10-³ is 0.0025.

Exponentiation is the process of calculating a power by multiplying together a number of equal factors, where the exponent specifies the number of factors to multiply.

For example, if 10 is multiplied three times, then it can be written as "10 raised to 3" which means 10³. In this case, 10 is the base, and 3 is the exponent.

Therefore, a number 0.0025 can be written in exponentiation as 2.5 × 10-³ by counting the number of zeros forward.

Learn more about exponentiation at: https://brainly.com/question/28596571

#SPJ1

Answer:

hey are the results of many experiments over a long period of time.

Explanation:

Answer:

Explanation:

NH4I  NH4 is ammonium thus a base.  All other bases end with OH except ammonia which is NH3

The formula for the activation energy was used to obtain;

a. The result is -2.11 * 10^-4 K

b. The result is  -3.29

The bare minimum of energy required to start a chemical reaction is referred to as activation energy. For a reaction to move from the reactants to the products, the energy barrier must be broken.

To break existing bonds and generate new ones, reactant molecules must collide with enough force and in the proper direction during a chemical reaction. The energy needed to dissolve these bonds and start the atoms moving around to generate the products is known as the activation energy.

We know that we can use the formula;

1/T2 - 1/T1

= 1/318 - 1/298

= -2.11 * 10^-4 K

Again;

ln(k1/k2) = ln(0.1/2.70)

= -3.29

Learn more about activation energy:https://brainly.com/question/28384644

#SPJ1