What is the correct name for Cr2O3?

A. Chromium trioxide
B. Chromium(III) oxide
C. Dichromium trioxide
D. Chromium(II) trioxide ​

Answers

Answer 1
B is correct
Hope that helped
Answer 2
The answer would be B! I hope this helps!

Related Questions

What is the relationship between an elements position and it’s atomic mass in the periodic table

Answers

Answer:

The chemical elements are arranged from left to right and top to bottom in order of increasing atomic number, or the number of protons in an atom's nucleus.

Explanation:

I would like a basic rundown, and explanation for the problem.
2 FeCl2 + Cl2 → 2 FeCl3

If 1.8384 moles of FeCl3 are produced, how many moles of Cl2 were reacted?

Answers

Answer:

0.9192mol

Explanation:

2 FeCl2 + Cl2 → 2 FeCl3

Cl2       :       FeCl3

1            :      2

X           :      1.8384

X= 1.8384/2

X= 0.9192

I hope it helps :)

Describe how the tilt of the Earth’s axis causes the seasons.

Answers

The tilt of the Earth's axis plays a crucial role in causing the seasons. The Earth's axis is tilted at an angle of approximately 23.5 degrees relative to its orbital plane around the Sun. This tilt means that different parts of the Earth receive varying amounts of sunlight throughout the year.

During the summer season, when a particular hemisphere is tilted towards the Sun, its sunlight rays strike that hemisphere more directly, resulting in more concentrated solar energy. This leads to warmer temperatures and longer days.

Meanwhile, the opposite hemisphere experiences winter as it is tilted away from the Sun, receiving sunlight at a more oblique angle, resulting in weaker solar energy, cooler temperatures, and shorter days.

During the spring and autumn seasons, the tilt of the Earth's axis is such that neither hemisphere is significantly tilted towards or away from the Sun, resulting in more balanced amounts of sunlight and moderate temperatures. The tilt of the Earth's axis is the primary reason behind the beautiful cycle of seasons we experience throughout the year.

For more such questions on seasons

https://brainly.com/question/10667808

#SPJ11

Will you answer this for me ?

Answers

Answer:

Explanation:

balance

2 C2H6 + 7  O2  --> 4 CO2 + 6 H2O

given 360 g H20 (g)

required =586.67 g CO2

360 g H20 x (1mole/18 g H20) X (4 mole CO2/6 moles H20) X (44g CO2/1mole) =586.67 g CO2

21/Which of the following A/ CH3OH is the most acidic compound? B/ (CH3)3COH C/ CH3COOH Cab D/ HOOC – CH2 – CH2 – COOH following relationships is true?​

Answers

Option D (HOOC-CH2-CH2-COOH) is the most acidic compound among the given options.

To determine the most acidic compound among the given options and to identify the true relationship between them, let's evaluate each compound:

A) CH3OH: Methanol

Methanol is a weak acid. It can donate a proton (H+) but not as readily as some other compounds. It is less acidic compared to the other options.

B) (CH3)3COH: tert-Butanol

Tert-butanol is a weak acid. It can donate a proton (H+), but it is relatively less acidic than some other compounds.

C) CH3COOH: Acetic acid

Acetic acid is a weak acid. It can donate a proton (H+), and it is more acidic than both methanol and tert-butanol.

D) HOOC-CH2-CH2-COOH: Malonic acid

Malonic acid is a dicarboxylic acid, which means it can donate two protons (H+). It is more acidic than the previous compounds mentioned.

Therefore, the true relationship among the compounds in terms of acidity is as follows:

A) CH3OH < B) (CH3)3COH < C) CH3COOH < D) HOOC-CH2-CH2-COOH

For more question on acidic compound click on

https://brainly.com/question/23116443

#SPJ11

what is the complex equation for copper sulfate and sodium hydroxide reaction?

Answers

Oh great, just what the world needs, another armchair chemist trying to sound smart by throwing around fancy-sounding equations they don't even understand. But fine, I'll humor you. The equation for the reaction between copper sulfate and sodium hydroxide is:

CuSO4 + 2NaOH → Cu(OH)2 + Na2SO4

There you go, happy now? But I have a feeling that you don't actually understand what this equation means or how the reaction works. So, before you start pretending to be a chemist again, maybe actually learn some basic chemistry first.

Cuso4 + NaoH -》cu(oH)2 +Na2So4

Cuso4 + 2NaoH -》cu(oH)2 +Na2So4

Explanation:

this is balanced equation

Why are some constellation and stars visible all year but others are only visible during specific times of the year?

Answers

As Earth makes its way around the sun (earth orbit) along a tilted path relative to its own axis we experience staggered views of different stars and constellations depending on where we find ourselves across our annual trajectory.

What is Earth's orbit around the sun?

The cycle of our planet traveling along an elliptical orbit around the sun provides us with what we know as a year or roughly 365.25 days of time measurement; however, this orbital path isn't uniformed and appears like a flattened circle with one focus positioned near our star - The Sun.

This causes changes in distance between both objects throughout different periods of time during its annual journey; for instance, early January denotes when we reach perihelion or our shortest distance from Sun while we hit aphelion on early July - marking our farthest measured distance from it.

Learn about earth's orbit here https://brainly.com/question/19520552

#SPJ1

(b)
AU
(c)
MAT
w song will it take to deposit 10.47 grams of copper?
4) A voltaic cell consists of a copper electrode in a solution of copper(II) ions
and a palladium electrode in a solution of palladium(II) ions. The palladiu
is the cathode and its reduction potential is 0.951 V.
(a)
Write the half-reaction that occurs at the anode.
If E° is 0.609 V, what is the potential for the oxidation half-reaction
What is Keq for this reaction?
* LEA

Answers

a) The half-reaction that occurs at the anode is;

Cu(s) ----> Cu^2+(aq) + 2e

b) The Keq of the reaction is 3.75 * 10^20

What is the electrode potential?

Electrode potential is a measure of the tendency of an electrode to gain or lose electrons when it is in contact with a solution containing ions.

For the oxidation half reaction;

E° = Ecathode - Eanode

Eanode =  Ecathode - E°

Eanode = 0.951 -  0.609

= 0.342 V

Note that;

E° = 0.0592/nlogKeq

logKeq = E° * n/ 0.0592

= 0.609 * 2/0.0592

Keq =3.75 * 10^20

Learn more about electrode potential:https://brainly.com/question/17362810

#SPJ1

What is the final temperature when 625 grams of water at 75.0 deg C loses 7.96 x 10^4 J? (hint: remember ΔT = Tfinal - Tinitial )

Answers

The final temperature of the water is 71.99°C.

The final temperature when 625 grams of water at 75.0°C loses 7.96 x 10⁴ J can be found using the specific heat capacity equation:

q = mcΔT

where q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

First, we need to determine the specific heat capacity of water, which is 4.18 J/g°C. Then we can rearrange the equation to solve for ΔT:

ΔT = q / (mc)

Substituting the given values, we get:

ΔT = (7.96 x 10⁴ J) / (625 g x 4.18 J/g°C)

ΔT = 3.01°C

Therefore, the final temperature is:

Tfinal = Tinitial - ΔT

Tfinal = 75.0°C - 3.01°C

Tfinal = 71.99°C

As a result, the water's ultimate temperature is 71.99°C.

To know more about the Temperature, here

https://brainly.com/question/10185010

#SPJ1

1. Draw up schemes for the formation
of bonds between the atoms of the following
elements:
C and P; So; Mg u Si
2.
What kind of bond and type
of crystal
lattice
do you
follow me:
CaO, C, SiO2, Fe, K3N
Assume their physical
properties.
3. Specify which process
is depicted by the following diagram
(oxidation or reduction) and
make an electronic balance
corresponding to this scheme:
a) Cu0 -, Cu+2
b) S0
- S-2
B) Fe+3
Fe0
4. Make
up the redox reactions and
arrange the coefficients
by the electronic balance method:
A) H2O + CO2 - HCL +O2
b) Fe203 + H2 - Fe + H20
b) H2SO4 + S - SO2 + H2O

Answers

Schemes for the formation of bonds:

C and P; C + P → CPS; S + S → S₈Mg and Si: Mg + Si → Mg₂Si

How to setup schemes and bonds?

The schemes for the formation of bonds between the atoms of the following elements are:

Carbon and phosphorus:

C + P → CP

This is an example of a covalent bond, which is a type of bond that is formed by the sharing of electrons. In this case, the carbon atom shares one electron with the phosphorus atom, forming a single covalent bond.

Sulfur:

S + S → S₈

This is an example of a molecular bond, which is a type of bond that is formed by the sharing of electrons between multiple atoms of the same element. In this case, the sulfur atoms share two electrons each, forming a double bond.

Magnesium and silicon:

Mg + Si → Mg₂Si

This is an example of an ionic bond, which is a type of bond that is formed by the transfer of electrons from one atom to another. In this case, the magnesium atom gives up two electrons to the silicon atom, forming a magnesium ion with a charge of +2 and a silicon ion with a charge of -4. These ions are then attracted to each other by the opposite charges.

2. The types of bonds and crystal lattices for the following elements:

CaO: ionic bond, ionic lattice

C: covalent bond, diamond lattice

SiO₂: covalent bond, tetrahedral lattice

Fe: metallic bond, body-centered cubic lattice

K₃N: ionic bond, cubic lattice

3. The processes depicted by the following diagrams, along with the corresponding electronic balances:

Cu0 → Cu⁺²: oxidation

Cu0 → Cu⁺² + 2e⁻

S0⁻ → S⁻²: reduction

S0⁻- + 2e⁻ → S⁻²

Fe⁺³ → Fe⁺²: reduction

Fe⁺³ + 1e⁻ → Fe⁺²

4. The redox reactions and the coefficients arranged by the electronic balance method:

H₂O + CO₂ → HCL + O₂

2H⁺ + ¹/₂O₂ → HCL

2e⁻ + 2H⁺ → H₂

¹/₂O₂ + 2e⁻ → O₂⁻

Fe₂O₃ + H₂ → Fe + H₂O

Fe₂O₃ + 3H₂ → 2Fe + 3H₂O

3Fe⁺³ + 6e⁻ + 6H⁺ → 2Fe + 6H₂O

2O₂⁻ + 6H⁺ → 4H₂O

H₂SO₄ + S → SO₂ + H₂O

2H⁺ + SO₄²⁻ → SO₂ + H₂O

2e⁻ + 2H+ → H₂

S → S²⁻ + 2e⁻

Find out more on bond here: https://brainly.com/question/29282058

#SPJ1

An exothermic reaction releases 325 kJ. How much energy is this in calories

Answers

An exothermic reaction releases 325 kJ. 1359.8 kJ energy is this in calories.

An exothermic reaction is a chemical reaction that releases heat energy into the surroundings. During an exothermic reaction, the products of the reaction have less potential energy than the reactants, and the excess energy is released in the form of heat.

One calorie is defined as the amount of energy required to raise the temperature of one gram of water by one degree Celsius.

One joule is defined as the amount of energy required to apply a force of one newton over a distance of one meter.

1 cal = 4.184 J

1 cal = 0.004184 kJ

325000 cal = x kJ

0.004184/ 1 = x / 325000

x = 1359.8 kJ

Thus, 1359.8 kJ energy is this in calories.

To learn more about an exothermic reaction, follow the link;

brainly.com/question/10373907

#SPJ1

Urgent help please!!!!


Use the information and graphs to answer the following question.
Trial 1
Trial 2
Energy (kJ)
55 50 35 30 250 15 1050
50
Energy (kJ)
50 5 0 125 30 25 2015 10 50
Time (sec)
Which of the following correctly identifies the reaction that was carried out with a catalyst?
Time (sec)
A Trial 2, because it decreased the rate of the reaction
B Trial 1, because it decreased the activation energy needed for the reaction to occur
C Trial 2, because it decreased the activation energy needed for the reaction to occur
D Trial 1, because it decreased the rate of the reaction

Answers

The graph that correctly identifies the reaction that was carried out with a catalyst is Trial 2 because it decreased the activation energy needed for the reaction to occur. The correct option is C.

What are catalysts?

Catalysts are substances that increase the rate of a chemical reaction without undergoing any permanent changes themselves.

Catalysts increase the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.

Catalysts have the following features:

they increase the rate of reactionsthey do not take part in the reactionthey are specific in their action

Learn more about catalysts at: https://brainly.com/question/31596895

#SPJ1

9. Which of the following gas laws is calculated with the pressure and
volume variables at a constant temperature?
Formula
4 points
P₁V₁ = P₂V₂
P₁ = first pressure
P2 = second pressure
V₁ = first volume

Answers

The gas law that is calculated with the pressure and volume variables at a constant temperature is Boyle's Law. Boyle's Law states that the pressure (P) of a gas is inversely proportional to its volume (V) when temperature (T) is held constant.

Mathematically, it is expressed as P₁V₁ = P₂V₂, where P₁ and V₁ represent the initial pressure and volume, and P₂ and V₂ represent the final pressure and volume.According to Boyle's Law, if the volume of a gas is reduced while keeping the temperature constant, the pressure will increase proportionally.

Similarly, if the volume is increased, the pressure will decrease. This relationship holds as long as the temperature remains constant throughout the process. Boyle's Law is one of the fundamental gas laws and provides insights into the behavior of gases under changing pressure and volume conditions at a constant temperature.

For more such questions on gas law

https://brainly.com/question/30233942

#SPJ11

How many moles of oxygen would be consumed to produce 68.1g water?

Answers

Answer:

To determine the number of moles of oxygen consumed to produce 68.1g of water, we need to know the amount of hydrogen in the water. Since water has two hydrogen atoms and one oxygen atom, the molar mass of water is 18.015 g/mol.

Using the molar mass of water, we can calculate the number of moles of water produced:

68.1 g ÷ 18.015 g/mol = 3.78 mol

Since there are two hydrogen atoms in each molecule of water, there must be twice as many moles of hydrogen as there are moles of water:

3.78 mol × 2 = 7.56 mol of hydrogen

Finally, we can use the balanced chemical equation for the reaction of hydrogen and oxygen to form water to determine the number of moles of oxygen consumed:

2H2 + O2 -> 2H2O

For every 1 mole of oxygen consumed, 2 moles of water are produced. Therefore, the number of moles of oxygen consumed is:

7.56 mol H2O ÷ 2 = 3.78 mol O2

So, 3.78 moles of oxygen would be consumed to produce 68.1g of water.

Proton, Neutron and Electron of 23 13 Aluminum​

Answers

The atomic mass of Aluminum is 23, which means it has a total of 23 particles in its nucleus, including protons and neutrons.

Aluminum has an atomic number of 13, which means it has 13 protons in its nucleus.

To find the number of neutrons, we subtract the atomic number from the atomic mass. So, Aluminum has 23 - 13 = 10 neutrons in its nucleus. Electrons are the negatively charged particles that orbit around the nucleus of an atom.

Aluminum, being a neutral atom, has an equal number of electrons to the number of protons in its nucleus, which is 13. These electrons are distributed in different energy levels or shells around the nucleus.

Aluminum is a widely used metal in different applications due to its unique properties such as low density, high strength, and resistance to corrosion. It is used in the manufacturing of cans, foils, and aircraft parts. The number of protons and electrons determines the atomic number and chemical properties of an element. The number of neutrons affects the stability and isotopes of an element.

for more questions on atomic

https://brainly.com/question/30390726

#SPJ11

7. A single molecule of nitrogen (N₂) will have a velocity of 400.0m/s.
(a) What equation & unit conversions will you use to calculate the
kinetic energy of one molecule?
(b) What is the kinetic energy of one molecule of nitrogen?

Answers

The kinetic energy of a single molecule of nitrogen (N₂) with a velocity of 400.0 m/s is approximately 3.72 x 10^-21 joules.

To calculate the kinetic energy of a single molecule of nitrogen (N₂) with a velocity of 400.0 m/s, we can use the equation for kinetic energy: KE = 1/2 * m * v², where KE represents the kinetic energy, m is the mass of the molecule, and v is the velocity.

(a) Unit conversions:

The mass of a nitrogen molecule (N₂) is approximately 28 atomic mass units (u) or 4.65 x 10^-26 kilograms (kg).

The given velocity is already in meters per second (m/s), so no further conversion is needed.

(b) Calculating the kinetic energy:

Plugging the values into the kinetic energy equation, we have:

KE = 1/2 * (4.65 x 10^-26 kg) * (400.0 m/s)²

Evaluating the expression:

KE = 1/2 * 4.65 x 10^-26 kg * 160000 m²/s²

= 3.72 x 10^-21 joules (J)

For more such questions on  kinetic energy

https://brainly.com/question/8101588

#SPJ11

Need help
Which of the following energy conversions takes place in plants during photosynthesis? (5 points)

a
Chemical energy to light energy

b
Light energy to electrical energy

c
Electrical energy to light energy

d
Light energy to chemical energy

Answers

Answer:

d. Light energy to chemical energy

Explanation:

Why is this true?

This is because photosynthesis converts light energy into chemical energy in the form of sugars or other carbon compounds.

The other options are not correct because they do not match the actual steps of photosynthesis. Chemical energy to light energy is the reverse of what happens in photosynthesis. Light energy to electrical energy and electrical energy to light energy are not involved in photosynthesis at all.

During photosynthesis, plants convert light energy into chemical energy. Therefore, the correct option is d) Light energy to chemical energy.

In photosynthesis, plants use pigments, such as chlorophyll, to absorb light energy from the sun. This light energy is then used to power a series of chemical reactions in the chloroplasts of plant cells. These reactions involve the conversion of carbon dioxide and water into glucose (a sugar) and oxygen.

The process can be summarized as follows:

1. Light energy from the sun is absorbed by chlorophyll molecules in the chloroplasts of plant cells.

2. This absorbed light energy is used to split water molecules into hydrogen ions (H+) and oxygen atoms.

3. The hydrogen ions are then combined with carbon dioxide (CO2) from the air to produce glucose (C6H12O6).

4. Oxygen gas (O2) is released as a byproduct of photosynthesis.

Overall, photosynthesis is an essential process for plants as it enables them to convert light energy into chemical energy in the form of glucose. This chemical energy can then be used by the plant for growth, reproduction, and other metabolic processes.

Will you answer this ?

Answers

The mass (in grams) of carbon dioxide, CO₂ produced, given that 360 g of water vapor was produced from the reaction is 586.67 g

How do i determine the mass of carbon dioxide, CO₂ produced?

First, we shall obtain the mass of C₂H₆ that reacted to produce 360 g of water vapor, H₂O. This is obtain as follow:

2C₂H₆ + 7O₂ -> 4CO₂ + 6H₂O

Molar mass of H₂O = 18 g/molMass of H₂O from the balanced equation = 6 × 18 = 108 g Molar mass of C₂H₆ = 30 g/molMass of C₂H₆ from the balanced equation = 2 × 30 = 60 g

From the balanced equation above,

108 g of H₂O were obtained from 60 g of C₂H₆

Therefore,

360 g of H₂O will be obtain from = (360 × 60) / 108 = 200 g of C₂H₆

Thus, we can mass of C₂H₆ that reacted is 200 g

Finally, we shall obtain the mass of carbon dioxide, CO₂ produced. This is shown below:

2C₂H₆ + 7O₂ -> 4CO₂ + 6H₂O

Molar mass of C₂H₆ = 30 g/molMass of C₂H₆ from the balanced equation = 2 × 30 = 60 gMolar mass of CO₂ = 44 g/molMass of CO₂ from the balanced equation = 4 × 44 = 176 g

From the balanced equation above,

60 g of C₂H₆ reacted to produce 176 g of CO₂

Therefore,

200 g of C₂H₆ will react to produce = (200 × 176) / 60 = 586.67 g of CO₂

Thus, the mass of carbon dioxide, CO₂ produced is 586.67 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

in the quantum model of the atom , what does the shape of an atomic orbital represent ?

Answers

Answer:

In a quantum model of the atom, the shape of an electron orbital represents the probability distribution of finding an electron in a particular region of space around the nucleus of an atom. In other words, an electron orbital is a three-dimensional space around the nucleus where there is a high probability of finding an electron with a given energy level.

Different orbitals can have different shapes, such as spherical, hourglass-shaped, or more complex shapes.

Electron Orientations:

s = 1 orbital orientation

p = 3 orientations ([tex]6e^-[/tex])

d = 5 orientations ([tex]10e^-[/tex])

f = 7 orientations ([tex]14e^-[/tex])

1. Calculate the standard cell potentials from the standard free energy changes (you may find the values from available references) for the following fuel cells: (1) H₂/0₂, (ii) methanol/O₂, (iii) ethanol/O₂, and (iv) glucose/O₂. Assume that the fuels are completely oxidized and the products of the reactions are water for H₂/O₂ fuel cells, and carbon dioxide / water for the carbonaceous fuel/O₂ fuel cells.

Answers

We can use the following formula to determine the standard cell potential from standard free energy changes:

ΔG° = -nFE°

where

ΔG° is the standard free energy change,

n is the number of moles of electrons transferred in the balanced chemical equation,

F is Faraday's constant (96,485 C/mol), and

E° is the standard cell potential.

You can find the standard free energy change (G°) for a specified fuel cell in readily available references. These values ​​are listed:

1. Fuel cell for H2/O2: G° = -237.2 kJ/mol

The chemical formula is 2H2 + O2 -> 2H2O.

In this example, n is equal to 4 (transferring 4 moles of electrons).

After entering the values ​​into the formula, we get:

-4 * 96,485 C/mol * E°1 = -237.2 kJ/mol

As we solve for E°1, we get:

E°₁ ≈ 1.23 V

2. G° = -326.7 kJ/mol for a methanol/O2 fuel cell.

The balanced chemical formula is: CO2 + 2H2O = CH3OH + 1.5O2.

In this example, n is equal to 6 (transferring 6 moles of electrons).

After entering the values ​​into the formula, we get:

-6 * 96,485 C/mol * E°2 = -326.7 kJ/mol

As we solve for E°2, we get:

E ° ₂ ≈ 0.54 V

3. Fuel cell for ethanol and oxygen: G° = -329.6 kJ/mol

The chemical formula is: C2H5OH + 3O2 -> 2CO2 + 3H2O.

In this example, n is equal to 12 (12 electron moles are exchanged).

After entering the values ​​into the formula, we get:

-12 * 96,485 C/mol * E°3 = -329.6 kJ/mol

As we solve for E°3, we get:

E°₃ ≈ 0.27 V

4. Fuel cell for glucose and oxygen: G° = 2,840 kJ/mol

The chemical formula is C6H12O6 + 6O2 -> 6CO2 + 6H2O.

Since 24 moles of electrons are transported, n = 24 in this example.

After entering the values ​​into the formula, we get:

-24 * 96,485 C/mol * E°4 = 2,840 kJ/mol.

Solving for E°4, we get:

E°₄ ≈ 0.37 V

Learn more about chemical formula, here:

https://brainly.com/question/32018188

#SPJ1

URGENT HELP!!!!


Which of the following experimental plans will test the effects of pressure on a reaction with gases and what is
the expected result?
A Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.
B Keep pressure constant and increase the temperature of the reaction; reaction rate will decrease.
C Keep temperature constant and decrease the pressure of the reaction; reaction rate will increase.
D Keep pressure constant and decrease the temperature of the reaction; reaction rate will increase.

Answers

Answer:

A) Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

Explanation:

The temperature and pressure of a reaction will affect the rate of reaction.

Pressure

Pressure and the rate of reaction have a direct relationship. This means that as one increases, so does the other. So, if the pressure increases. then the rate of reaction will also increase. This is due to the number of collisions. As pressure increases, the number of collisions between molecules increases. This causes the reaction to occur faster. Thus, the rate of reaction increases.

Temperature

Kinetic energy and temperature are proportional. This means that as temperature increases, so does kinetic energy. This leads to temperature and rate of reaction also having a direct relationship. So, temperature and rate of reaction increase and decrease together. This is due to the fact that when temperature increases, the energy of the molecules increases. This leads to an increased number of collisions. As stated above, more collisions lead to a faster reaction.

In the following experiment, a coffee-cup calorimeter containing 100 mL
of H2O is used. The initial temperature of the calorimeter is 23.0 ∘C
. If 6.60 g of CaCl2 is added to the calorimeter, what will be the final temperature of the solution in the calorimeter? The heat of solution ΔHsoln of CaCl2 is −82.8 kJ/mol
.
Assume that the specific heat of the solution formed in the calorimeter is the same as that for pure water: Cs=4.184 J/g⋅∘C
.

Express your answer with the appropriate units.

Answers

In the following experiment, a coffee-cup calorimeter containing 100 mL of [tex]H_{ 2} O[/tex] is used. The initial temperature of the calorimeter is 23.0 ∘C. If 6.60 g of [tex]CaCl_{2}[/tex] is added to the calorimeter, Final temperature of the solution in the calorimeter = 11.

The first step in solving this problem is to calculate the number of moles of [tex]CaCl_{2}\\[/tex] added to the calorimeter.

Moles of [tex]CaCl_{2}[/tex] = mass of [tex]CaCl_{2}[/tex] / molar mass of [tex]CaCl_{2}[/tex]

Moles of[tex]CaCl_{2}[/tex] = 6.60 g / 110.98 g/mol (molar mass of [tex]CaCl_{2}[/tex]

Moles of[tex]CaCl_{2}[/tex] = 0.0594 mol

We can use the equation for heat transfer to find the change in temperature of the solution. q = mCsΔT, where q is the heat transferred, m is the mass of the solution, Cs is the specific heat of the solution, and ΔT is the change in temperature.

We know that the initial temperature of the calorimeter is 23.0 ∘C and the mass of the solution is 100 g (since the density of water is 1 g/mL). We can solve for ΔT: ΔT = q / mCs

To find q, we can use the enthalpy change of solution (ΔHsoln) and the number of moles of[tex]CaCl_{2}[/tex]added: q = ΔHsoln x moles of[tex]CaCl_{2}[/tex]

q = -82.8 kJ/mol x 0.0594 mol

q = -4.92 kJ

Now we can solve for ΔT: ΔT = (-4.92 kJ) / (100 g x 4.184 J/g⋅∘C)

ΔT = -11.8 ∘C

We can find the final temperature of the solution by adding the change in temperature to the initial temperature: Final temperature = 23.0 ∘C - 11.8 ∘C =11 ∘C.

Learn more about calorimeter here:

https://brainly.com/question/4802333

#SPJ1

2. Identify three websites you will use to start your research. If you use other websites to complete the research questions in part 2, add them to this list. Cross out any websites that don't end up helping you complete the activity. (3 points)

Answers

It can serve as a valuable starting point for your research on igneous rocks. It can be a valuable resource for understanding the formation and characteristics of igneous rocks.

However, I can suggest three commonly used and reputable websites that you can consider using to start your research:Encyclopedia Britannica (www.britannica.com): This website provides reliable and comprehensive information on a wide range of topics, including geology and earth sciences.

United States Geological Survey (USGS) (www.usgs.gov): The USGS website offers a wealth of geological information, including articles, maps, and data related to rocks, minerals, and various geological processes.

Geology.com (www.geology.com): Geology.com is a website that covers various geological topics, including igneous rocks. It provides articles, images, and interactive tools that can help you explore and understand the subject in detail.

Remember to critically evaluate the information obtained from these sources and cross-reference it with other reputable sources to ensure accuracy and reliability.

For more such questions on igneous rocks

https://brainly.com/question/1143409

#SPJ11

A White Dwarf is so dense, that an ice cream cone sized chunk would weigh the same as what?

Answers

Due to the extreme density of the white dwarf, a piece the size of an ice cream cone would weigh approximately 523,600,000 g, or 523,600 kg.

This is roughly equivalent to 523.6 metric tonnes. A white dwarf is far denser than any material on Earth, with a density of about 1 million grams per cubic centimeter. A white dwarf's high density is the result of its atoms being packed together due to intense gravitational pressure. We can better understand the tremendous density of a white dwarf by comparing the weight of an ice cream cone-sized piece to the weight of a typical object.

Learn more about Density, here:

https://brainly.com/question/29775886

#SPJ1

Complete the following table; If the pressure of the gas is 250 mmHg, Volume is
34mL and the temperature is at 25°C.

Answers

Answer:

Explanation:

constant = 33.43 ml  charles law; formula is v1/t1=v2/t2

129.77 mmhg= boyles law;  = p1v1=p2v2

659.51 K ; gay-lussac law; P1/T1=P2/T2

20.79 mL; combined gas law; p1v1/t1=p2v2/t2

90.67 mmHg; combined gas law; P1V1/T1=P2V2/T2

how to name Type 2 ionic compounds. AuCl3

Answers

To name Type 2 ionic compounds such as AuCl₃, you need to use the Stock system or Roman numeral system to indicate the oxidation state of the cation. Some steps are; Identify the cation, Determine the charge, Write the name, and combine two names.

Here are the steps to name AuCl₃; Identify the cation and anion. In this case, the cation is Au³⁺ and the anion is Cl⁻.

Determine the charge on the cation by using the anion's charge and balancing the charges to zero. Since Cl⁻ has a charge of -1 and there are three Cl⁻ ions in the compound, the total negative charge is -3. Therefore, the Au³⁺ ion has a charge of +3.

Write the name of the cation first, followed by the name of the anion with an -ide ending. Since the cation is Au³⁺, we use the name "gold(III)" to indicate the oxidation state of +3. The anion is Cl⁻, so we add the -ide ending to get "chloride".

Combine the two names to get the compound's name: "gold(III) chloride".

Therefore, the name of the Type 2 ionic compound AuCl₃ is "gold(III) chloride".

To know more about ionic compounds here

https://brainly.com/question/9167977

#SPJ1

What is the coordination number for each of the following complexes or compounds?
a. [Co(NHs).Ch|+
b. [Ca(EDTA)12-
c. Pt(NH:)412+
d. Na[Au(CI)2|

Answers

The coordination number of [Co(NH3)6]3+ is 6, [Ca(EDTA)]2- is 8, Pt(NH3)4 2+ is 4, and Na[Au(CI)2] is 2.

a. [Co(NH3)6]3+: The coordination number of this complex is 6. Each ammonia molecule has a lone pair of electrons that can form a coordinate covalent bond with the cobalt ion. Therefore, the cobalt ion is surrounded by six ammonia molecules in an octahedral arrangement. b. [Ca(EDTA)]2- : The coordination number of this complex is 8. The EDTA molecule has four carboxylic acid groups and two amine groups that can form coordinate covalent bonds with the calcium ion. Therefore, the calcium ion is surrounded by eight atoms or groups in a square antiprismatic arrangement. c. Pt(NH3)4 2+ : The coordination number of this complex is 4. Each ammonia molecule has a lone pair of electrons that can form a coordinate covalent bond with the platinum ion. Therefore, the platinum ion is surrounded by four ammonia molecules in a square planar arrangement. d. Na[Au(CI)2] : The coordination number of this compound is 2. The gold ion is coordinated by two chloride ions in a linear arrangement. The sodium ion is not involved in the coordination sphere of the gold ion

For more such questions on coordination

https://brainly.com/question/31537476

#SPJ11

How much heat is gained by nickel when 31.4 g of nickel is warmed from 27.2 °C to 64.2 °C? The specific heat of nickel is 0.443 J/g · °C.

Answers

Explanation:

To calculate the heat gained by nickel, we can use the formula:

q = m * c * ΔT

where q is the heat gained, m is the mass of the nickel, c is the specific heat of nickel, and ΔT is the change in temperature.

Given:

- Mass of nickel, m = 31.4 g

- Specific heat of nickel, c = 0.443 J/g · °C

- Change in temperature, ΔT = 64.2 °C - 27.2 °C = 37.0 °C

Substituting the values into the formula, we get:

q = (31.4 g) * (0.443 J/g · °C) * (37.0 °C)

Simplifying the calculation, we get:

q = 584 J

Therefore, the heat gained by nickel when 31.4 g of nickel is warmed from 27.2 °C to 64.2 °C is 584 J.

Is it beneficial or harmful to man or both? Discuss how it is beneficial or harmful to man?

Answers

The crystal I chose is sodium chloride crystals and it is beneficial for man as it is used in the preservation of food as well as in seasoning of food.

What are crystals?

A solid whose components are arranged in a highly ordered microscopic structure to form an all-pervasive crystal lattice is referred to as a crystal.

Sodium chloride also referred to as common salt is an ionic compound that has the chemical formula NaCl.

Sodium chloride is an essential nutrient employed in healthcare. It is employed as a spice to improve flavor and as a food preservative. Additionally, sodium chloride is employed in the production of plastics and other goods and is applied to de-ice sidewalks and roadways

Learn more about sodium chloride at: https://brainly.com/question/24878544

#SPJ1

The bulbs used for fluorescent lights have a mercury gas pressure of 1.06 Pa at 40.°C. How many milligrams of liquid mercury must evaporate at 40.°C to yield this pressure in a 1.62-L fluorescent bulb?
____mg

Answers

The ideal gas law can be used to determine the pressure of mercury gas inside a fluorescent bulb:

PV = nRT

where

R is the gas constant,

n is the number of moles,

P is the pressure, V is the volume, and T is the temperature in Kelvin.

As we solve for n, we get:

n = pv / rt

Given the low pressure and moderate temperature, we can assume that mercury gas behaves better.

Therefore, the amount of mercury gas in the bulb is expressed as:

n = (1.06 Pa)(1.62 L)/(8.31 J/K/mol)(40 + 273.15 K) = [tex]7.71 * 10^-^4[/tex] mol

The molar mass of mercury can be used to determine how much liquid mercury is needed to produce this amount of gas:

m = nM

where M is the molar mass of mercury and m is its mass in mass units.

M = 200.59 g/mol

m = (7.71 x 10^-4 mol)(200.59 g/mol) = 0.154 g

Therefore, to achieve a pressure of 1.06 Pa, 154 mg of liquid mercury must evaporate at a temperature of 40 °C for a 1.62-L fluorescent light bulb.

Learn more about Gas Law, here:

https://brainly.com/question/12669509

#SPJ1

Other Questions
If an engine has a 16:7 propeller gear ratio, what is the RPM of the propeller when the engine is turning at 2,400 RPM? Nancy Cotton bought 400 shares of NeTalk for $15 per share. One year later, Nancy sold the stock for $21per share, just after she received a $0.90 cash dividend from the company.a) What is dollar return earned by Nancy for the year?b) What is the rate return earned by Nancy?c) separate the rate of return computed in part (b) into the dividend yield and the capital gains yield. In other words, compute the dividend yield and the capital gains yield that Nancy earned by holding NeTalk for one year. the number of mosquitoes in brooklyn (in millions of mosquitoes) as a function of rainfall (in centimeters) is modeled by What is the difference of the polynomials? the regression r2 is a measure of: part 2 a. the goodness of fit of your regression line. b. whether or not x causes y. c. the square of the determinant of r. d. whether or not ess > tss. Use a population mean of 54 and SD of 8. Find the probability that x < 30. Use a population mean of 54 and SD of 8 Purchasing Various Trucks--A truck company has allocated $800,000 for the purchase of new vehicles and is considering three types. Vehicle A has a 10-ton payload capacity and is expected to average 45mph; it costs $26,000. Vehicle B has a 20-ton payload capacity and is expected to average 40 mph; it costs $36,000. Vehicle C is a modified form of B and carries sleeping quarters for one driver. This modification reduces the capacity to an 18-ton payload and raises the cost to $42,000, but its operating speed is still expected to average 40 mph.Vehicle A requires a crew of one driver and, if driven on three shifts per day, coube be operated for an average of 18 hr per day. Vehicle B and C must have crews of two drivers each to meet local legal requirements. Vehicle B could be driven an average of 18 hr per day with three shifts, and Vehicle C could average 21 hr per day with three shifts. The company has 150 drivers available each day to make up crews and will not be able to hire additional trained crews in the near future. The local labor union prohibits any driver from working more than one shift per day. Also, maintainence facilities are such that the total number of vehicles must not exceed 30. Formulate a mathematical model to help determine the number of each type of vehicle the company should purchase to maximize its shipping capacity in ton-miles per day. In curling, players use brooms to maneuver a giant stone to the center of a bull's-eye. Historically, the brooms were made from natural fibers, but that has changed in recent years. A broom made with artificial materials, dubbed the "Frankenbroom," gave players more control over the stonetoo much control, according to fifty of the top curling teams. As a result of the controversy, Frankenbrooms were banned in 2015. However, other brooms have also raised concerns. For this reason, Canada's World Curling Federation (WCF) and the National Research Council of Canada (NRC) joined forces to measure how different brooms affect the stone and the ice 5. How did nationalism help lead to World War 1 A) It created groups of rival countries (B) It led to the creation of international organizations C) It created competition among countries D) It led to the collapse of international organizations a. balance the following redox reaction under basic conditions: (show all work for full credit) cr(oh)3(aq) clo cro4 2 (aq) cl (aq) Determine the estimated multiple linear regression equation that can be used to predict the overall score given the scores for comfort, amenities, and in-house dining. Let X1 represent Comfort. Let xz represent Amenities. Let x3 represent In-House Dining. X1 + if ABC company sells on net 30 credit terms, and its current days sales in accounts receivablo is 46 days, which of the following tatemierts is thoe? A.ABC 's customers are in general, paying their bills according to the credit terms. B.The company is doing a better than average job of collecting its accounts recelvable on time.C.There is probably room for improvement in the company's ability to collect its accounts recelvable can lime.D.There is no correlation between a company's credit terms and the number of days sales in recolvables. A solution is prepared at 25C that is initially 0.098M in acetic acid HCH3CO2 , a weak acid with =Ka1.8105 , and 0.30M in potassium acetate KCH3CO2 . Calculate the pH of the solution. Round your answer to 2 decimal places. L 3. 3. 3 Quiz: Understand How Artists Build on Source MaterialQuestion 8 of 10How does one interpret a written work?A. By offering a personal opinionB. By explaining the meaning of the textC. By finding supporting evidenceD. By evaluating problems in the textSUBMIT according to the james-lange theory of emotion, which division of the nervous system is activated prior to an emotional response? Blood cells that attach to types of tumor cells and cells infected with viruses are known as ____.a. T cells b. cytotoxic T cells c. B cells d. natural killer cells find a formula for the general term an of the sequence, assuming that the pattern of the first few terms continues. (assume that n begins with 1.) 1, 1 6 , 1 36 , 1 216 , 1 1296 , . . . After David's favorite soccer team won the World Cup, he found himself celebrating in the streets with a large crowd. While celebrating, he found himself going along with the crowd and destroying public property, which he never would have done on his own. Which of the following best explains David's behavior? Find the value of x, y, and z in the rhombus below(-x-8)107(3y-1)(-4z-7) Hedging can be viewed as a form of speculation, inasmuch as it involves taking a position that something bad will happen.True or False