What is the molarity of sodium hydroxide if 20.0 mL of the solution is neutralized by each of the following 1.00M solutions?A. 28.0 mL of HClB. 17.4 mL of H3PO4

The original concentration of the H₂C₂O4 solution is 0.7455 mol/L.

The balanced chemical equation for the reaction between H₂C₂O4 and NaOH is:

H₂C₂O4 + 2NaOH → Na₂C₂O₄ + 2H₂O

From this equation, we can see that the acid reacts with the base in a 1:2 ratio, meaning that one mole of H₂C₂O4 will react with two moles of NaOH.

To find the original concentration of the acid solution, we need to use the formula for calculating molarity:

Molarity = moles of solute / volume of solution (in liters)

We can start by calculating the number of moles of NaOH used in the titration:

moles of NaOH = Molarity x volume of NaOH used (in liters)

moles of NaOH = 0.4700 mol/L x 0.05820 L

moles of NaOH = 0.027354 moles

Since the acid and base react in a 1:2 ratio, we know that the number of moles of H₂C₂O4 is half the number of moles of NaOH used:

moles of H₂C₂O4 = 0.027354 moles / 2

moles of H₂C₂O4 = 0.013677 moles

Now we can use the formula for molarity to calculate the original concentration of the acid solution:

Molarity of H₂C₂O4 = moles of H₂C₂O4 / volume of H₂C₂O4 used (in liters)

Molarity of H₂C₂O4 = 0.013677 moles / 0.01835 L

Molarity of H₂C₂O4 = 0.7455 mol/L

Learn more about concentration here: https://brainly.com/question/26255204

#SPJ1

The major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone is an imine.

A functional group or organic substance with a carbon-nitrogen double bond (C=N) is known as an imine. A hydrogen atom or an organic group may be joined to the nitrogen atom. (R). The carbon atom is connected to two more single bonds. Imines are present in numerous processes and are frequently found in manufactured and naturally occurring chemicals.

The five core atoms for ketimines and aldimines, C2C=NX and C(H)C=NX, respectively, are coplanar. The sp2-hybridization of the mutually double-bonded nitrogen and carbon atoms yields planarity. For nonconjugated imines, the C=N distance is 1.29-1.31, whereas for conjugated imines, it is 1.35. The C-N distances in amines and nitriles, on the other hand, are 1.47 and 1.16, respectively. Slow rotation occurs around the C=N bond. E- and Z-isomers were detected using NMR spectroscopy of aldimines have been detected. Owing to steric effects, the E isomer is favored.

An imine is formed when a primary amine reacts with a carbonyl group (C=O) of an aldehyde or ketone to form a new C-N bond. This reaction is known as a condensation reaction, as it involves the loss of a small molecule (e.g. water) to form the product.

For more such questions on condensation reaction , Visit:

https://brainly.com/question/1361341

#SPJ11

The correct questions is :

What  is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?

The reaction between 2NaOH (aq) and H2SO4 (aq) is reversible. The reaction between Na2SO4 (aq) and 2H2O (l) is irreversible. The reaction between 4HCl (g) and O2 (g) is irreversible. The reaction between CO2 (g) and C (s) is also irreversible.

In the first reaction, 2NaOH (aq) and H2SO4 (aq) react to form Na2SO4 (aq) and 2H2O (l). This reaction is reversible because it can be reversed to its original reactants, 2NaOH (aq) and H2SO4 (aq).
In the second reaction, Na2SO4 (aq) and 2H2O (l) react to form H2SO4 (aq) and 2NaOH (aq). This reaction is irreversible because the reactants cannot be reversed to their original form.
In the third reaction, 4HCl (g) and O2 (g) react to form 2H2O (g) and 2Cl (g). This reaction is also irreversible since the reactants cannot be reversed to their original form.
In the fourth reaction, CO2 (g) and C (s) react to form 2CO (g). This reaction is also irreversible since the reactants cannot be reversed to their original form.

For more such questions on reaction

https://brainly.com/question/29470602

#SPJ11

Answer: 2. The area of a square with sides 2.50 cm long is:

Area = side × side = 2.50 cm × 2.50 cm = 6.25 cm²

The thickness of the platinum sheet is 0.25 mm, which is equivalent to 0.025 cm.

Therefore, the volume of the platinum sheet is:

Volume = Area × thickness = 6.25 cm² × 0.025 cm = 0.15625 cm³

So, the volume of the platinum sheet is 0.15625 cm³.

Explanation:  3  To convert milliliters (mL) to liters (L), we need to divide the volume in milliliters by 1000.

So, to convert the volume of a wine bottle from 750 mL to liters, we can use the formula:

Volume in liters = Volume in milliliters ÷ 1000

Plugging in the values, we get:

Volume in liters = 750 mL ÷ 1000 = 0.75 L

Therefore, a standard wine bottle has a volume of 0.75 liters.

Answer: Cleavage

Explanation:

When a mineral breaks along a weekly bonded plane it is called cleavage

The type of substitution/elimination mechanism that is most favorable depends on the specific substrate and reaction conditions.

SN1 (Substitution Nucleophilic Unimolecular) mechanism is favored in the following conditions:

Tertiary or secondary substrate: Since the SN1 reaction involves a carbocation intermediate, a more stable carbocation will form more easily, which is possible with a tertiary or secondary substrate.

Polar protic solvent: A polar protic solvent stabilizes the carbocation intermediate and solvates the nucleophile.

Weak nucleophile: Since the carbocation intermediate is highly reactive, a weak nucleophile is preferred to avoid competing reactions that could produce alternative products.

SN2 (Substitution Nucleophilic Bimolecular) mechanism is favored in the following conditions:

Primary or methyl substrate: The SN2 reaction involves a one-step mechanism, where the nucleophile attacks the substrate as the leaving group departs. This mechanism is best suited to a primary or methyl substrate, where steric hindrance is minimal.

Polar aprotic solvent: A polar aprotic solvent is best suited to an SN2 reaction as it does not solvate the nucleophile as strongly, allowing it to react more easily.

Strong nucleophile: A strong nucleophile is preferred in an SN2 reaction since the nucleophile will be more effective in attacking the substrate.

E1 (Elimination Unimolecular) mechanism is favored in the following conditions:

Tertiary or secondary substrate: Since the E1 reaction involves a carbocation intermediate, a more stable carbocation will form more easily, which is possible with a tertiary or secondary substrate.

Polar protic solvent: A polar protic solvent stabilizes the carbocation intermediate.

Weak base: A weak base is preferred in an E1 reaction, as a strong base would favor an E2 reaction.

E2 (Elimination Bimolecular) mechanism is favored in the following conditions:

Primary or secondary substrate: E2 reaction requires that the substrate be in the anti-coplanar conformation, which is easier to achieve with a primary or secondary substrate.

Polar aprotic solvent: A polar aprotic solvent is preferred in an E2 reaction as it does not solvate the nucleophile as strongly, allowing it to react more easily.

Strong base: A strong base is preferred in an E2 reaction, as a weak base would favor an E1 reaction.

Based on the given substrate and reaction conditions, it is not possible to determine the most favorable substitution/elimination mechanism. Further information is needed about the substrate and reaction conditions to make a determination.

Learn more about elimination mechanism.

https://brainly.com/question/30545196

#SPJ4

Answer:

50 ml

Explanation:

n = moles

c = concentration

v = volume

n = c × v

HCl + NaOH --> NaCl + H2O

HCl:

50 ml = 50 cm³ = 0.05 dm³

n = 0.05 × 0.1

n = 0.005

Ratio of HCl to NaOH:

HCl : NaOH

Based on reaction equation:

1 : 1

0.005 : x

x = 0.005

NaOH:

0.005 = 0.1 × v

v = 0.05

0.05 dm³ = 50 cm³ = 50 ml

The volume of the irregularly-shaped piece of aluminum is 20.89 cm³.

To calculate the volume of the irregularly-shaped piece of aluminum, we first need to calculate its density.

This is done by dividing the mass of the aluminum (56.4 grams) by its density (2.70 g/cm³).

That is

Volume = 56.4 grams/2.70 g/cm³

Volume = 20.89 cm³

This gives us a result of 20.89 cm³.

Density is a measure of mass per unit volume. It is typically expressed in units of grams per cubic centimeter (g/cm3). It is an intensive property, meaning that it is a physical property of a material that does not depend on the amount of the material present.

Learn more about density here:

https://brainly.com/question/26364788

#SPJ1

The He element is the one that is hardest to ionize.

The correct answer is He.

An object is categorised as an element if it cannot be reduced to a simpler form. It is possible to recognise them by their particular atomic number. The elements are organised into groups in the periodic table based on their atomic numbers, and those having related characteristics are underlined.

An element is any substance made entirely of a certain type of atom, which are the building blocks of all matter. We know that each element is composed of protons, neutrons, and electrons. Some of the tiniest components in all of nature are these.

To know more about Elements visit:

https://brainly.com/question/14347616

#SPJ1

The equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.

The balanced chemical equation for the given chemical reaction is:

2NO(g) + 2H₂(g) ⇌ N₂(g) + 2H₂O(g)

where ⇌ indicates a state of equilibrium.

The equilibrium concentrations are:

[NO] = 0.0081 M

[H₂] = 4.1 × 10⁻⁵ M

[N₂] = 5.3 × 10⁻² M

[H₂O] = 2.9 × 10⁻³ M

The equilibrium constant, Keq, is given by:

Keq = [N₂][H₂O]² / [NO]²[H₂]²

Substituting the given values:

Keq = (5.3 × 10⁻²) (2.9 × 10⁻³)² / (0.0081)² (4.1 × 10⁻⁵)²

Keq = 640.86

The equilibrium constant in terms of partial pressures, KP, is related to Keq as follows:

KP = Keq(RT)^Δn

where R is the gas constant, T is the temperature in Kelvin, and Δn is the difference between the total number of moles of gaseous products and the total number of moles of gaseous reactants.

For the given reaction:

Δn = (1 + 2) − (2 + 2) = −1

Substituting the values:

KP = 640.86 (0.08206)(298)⁻¹

KP = 0.0198

Therefore, the equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.

To know more about equilibrium constant, visit:

https://brainly.com/question/15118952

#SPJ1

No. According to solubility rule, we cannot use the Fe(NO3)3 rather than AgNO3 via analysis of precipitate of AgCl because no precipitate of cl- ion formed in Fe(NO3)3 .

A solubility chart having solubility rules is defined as a chart describing for different combinations of cations and anions whether the ionic compounds formed dissolve in or precipitate from a solution. This chart shows the solubility of various common ionic compounds in water, at a pressure of 1 atm. and under room temperature.

The following reactions are involved to determine Cl- concentration,

Case 1:  Fe(NO3)3 (aq.) + Cl-(aq.)   ----> FeCl3(aq.) + NO3-(aq.).

In this reaction involving aqueous solution of Fe(NO3)3 no precipitate of Cl- ion compound is formed .so this we can not use Fe(NO3)3 to determine %Cl- ion in solution.

Case 2 :

AgNO3(aq.) + Cl- (aq.)  ---> AgCl(precipitate) + NO3-.

This reaction involving aqueous solution of AgNO3 can be use to determine %Cl- ion concentration in solution via analysis of precipitate of AgCl .

To learn more about Solubility Rule

https://brainly.com/question/15596863

#SPJ4

The acid in the reaction would donate a proton and that would be HNO2.

An acid in a chemical reaction can be identified by the presence of hydrogen ions (H+): Acids are compounds that produce hydrogen ions when dissolved in water. In a chemical reaction, an acid may donate a hydrogen ion to another compound or accept a pair of electrons from a base.

When we look at the reaction, we can see that the specie that has given out the replaceable hydrogen ion is HNO2 thus it is the acid in the reaction.

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

Diethyl ether is the better solvent to extract solute X from water, and it is twice as soluble in diethyl ether as it is in methylene chloride.

In this given question, we have to extract solute X from water. It is given that solute X is twice as soluble in diethyl ether as it is in methylene chloride. Solute X is twice as soluble in diethyl ether as it is in methylene chloride. Therefore, we can say that diethyl ether is a better solvent as compared to methylene chloride to extract solute X from water. Solute X will dissolve more readily in diethyl ether than in methylene chloride.It means if we use diethyl ether to extract solute X from water, we will get a more pure solution of solute X as compared to the solution that we will get if we use methylene chloride as a solvent. Therefore, we should choose diethyl ether to extract solute X from water.

To learn more about Diethyl ether :

https://brainly.com/question/31112141

#SPJ11

If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.

In chemistry, calibration is defined as the act of making sure that any scientific process/ instrument produce results which are accurate.

If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.

For example, if the bottom of the meniscus of liquid in the cylinder is at 6 ml mark and the top of the meniscus is between the 14 ml and 16 ml marks, we can estimate that the volume of liquid in cylinder is between 6 ml and 16 ml, but we cannot estimate a value in between such as 8 ml or 10 ml.

To know more about calibration, refer

https://brainly.com/question/30286269

#SPJ1

0.100 mole sample of ethane contains approximately 1.204 x [tex]10^{24}[/tex] carbon atoms and 3.612 x [tex]10^{24}[/tex] hydrogen atoms.

What are the atoms?

In one molecule of ethane (C2H6), there are 2 carbon atoms and 6 hydrogen atoms.

To determine how many atoms are present in a 0.100 mole sample of ethane, we can use Avogadro's number, which relates the number of particles (in this case, molecules) to the amount of substance in moles. Avogadro's number is approximately 6.02 x [tex]10^{23}[/tex] particles per mole.

So, a 0.100 mole sample of ethane would contain:

Simplifying this expression, we get:

Therefore, a 0.100 mole sample of ethane contains approximately 1.204 x [tex]10^{24}[/tex] carbon atoms and 3.612 x [tex]10^{24}[/tex] hydrogen atoms.

To know more about ethane, visit:

https://brainly.com/question/8478519

#SPJ1

The atoms that are cis to the hydroxyl (OH) substituent are the two carbon atoms in the ring that are directly adjacent to the OH group.

Cis-trans isomerism is a word used in chemistry that refers to the spatial arrangement of atoms within molecules. It is also known as geometric isomerism or configurational isomerism. The Latin prefixes "cis" and "trans" mean, respectively, "this side of" and "the other side of." Trans conveys that the functional groups (substituents) are on the opposite (transverse) sides of some plane, whereas cis implies that they are on the same side of some plane in the context of chemistry.

Cis-trans isomers are examples of stereoisomers, which are pairs of molecules with the same formula but distinct functional groups oriented in three dimensions. The absolute stereochemical explanation of E-Z isomerism does not necessarily equate to cis-trans notation.

The hydroxyl group (-OH) is attached to carbon number 1. The cis atoms are those that are attached to the same side of the ring. There are two atoms that are cis to the hydroxyl (OH) substituent, and these are atoms number 2 and 3. Therefore, the atoms that are cis to the hydroxyl (OH) substituent are atoms number 2 and 3 .

Thus, the cis to the hydroxyl (OH)  is (B) 2 and 3.

For more such questions on Cis-trans , Visit:

https://brainly.com/question/13557044

#SPJ11

1. Temperature and salinity affect the flow of water in the ocean by creating density differences that drive ocean currents.

2. [image of warm and cold water mixing and creating a convection cell is mentioned below]

When warm water mixes with cold water in the ocean, a convection cell forms. Warm water rises and cold water sinks, which drives ocean currents. This process is influenced by other factors such as wind, Earth's rotation, and the shape of ocean basins.

What is density?

Density refers to the amount of mass per unit volume of water. At standard conditions (temperature of 4 degrees Celsius and pressure of 1 atmosphere), the density of pure water is approximately 1 gram per cubic centimeter (g/cm³). However, the density of water can vary depending on its temperature and salinity.

What is convection cell?

A convection cell is a circular pattern of fluid movement that arises when warm fluid rises and cold fluid sinks in a circular motion, creating a loop or cell. In the context of oceanography, convection cells can be formed when warm water rises and cold water sinks, either due to differences in temperature or salinity.

To know more about density, visit:

https://brainly.com/question/29775886

#SPJ1

Answer: Approximately 267.5 Kelvin

Explanation:

To find the temperature of a sample of neon with an rms speed of 500.0 m/s, we can use the following formula that relates the root mean square (rms) speed of gas molecules to their temperature:

v_rms = sqrt((3kT) / m)

where v_rms is the rms speed of the gas molecules, k is the Boltzmann constant, T is the temperature in Kelvin, and m is the mass of a single gas molecule.

For neon, the mass of a single molecule is approximately 20.18 atomic mass units (u), which is equivalent to 3.35 x 10^-26 kg.

Substituting the given values into the formula, we get:

500.0 m/s = sqrt((3kT) / (3.35 x 10^-26 kg))

Solving for T, we get:

T = (m / (3k)) * v_rms^2

T = (3.35 x 10^-26 kg / (3 * 1.38 x 10^-23 J/K)) * (500.0 m/s)^2

T ≈ 267.5 K

Therefore, the temperature of the neon sample with an rms speed of 500.0 m/s is approximately 267.5 Kelvin.

This claim is untrue. A developmental mismatch between the maturation of various brain systems, particularly the prefrontal cortex, and the limbic system, is a hallmark of the teenage brain.

The limbic system, which is engaged in emotion regulation and reward processing, develops earlier than the prefrontal cortex, which is in charge of impulse control, decision-making, and other executive processes.

Teenagers may therefore be more likely to participate in a dangerous activity and seek out unique experiences, but they may also have trouble controlling their impulses and making reasoned decisions.

The development of the brain is a complicated and ongoing process, and individual variations in neural maturation and life events can also have an impact on teenage behavior and decision-making.

However, there is no typical pattern of adolescent behavior or brain function due to individual variances and ongoing brain development.

learn more about controlling behavior here

https://brainly.com/question/6646156

#SPJ1

Alkenes are described as being unsaturated hydrocarbons because they contain at least one carbon-carbon double bond, which is not completely saturated with hydrogen atoms.

Atoms are the basic building blocks of all matter, and are the smallest particles known to exist. Atoms are made up of protons, neutrons and electrons. Protons are positively charged particles located in the nucleus of the atom, while neutrons are neutral particles also located in the nucleus. Electrons are negatively charged particles that orbit the nucleus.

a) Alkenes are described as being unsaturated hydrocarbons because they contain at least one carbon-carbon double bond, which is not completely saturated with hydrogen atoms. The presence of the double bond creates a greater degree of unsaturation than single-bonded hydrocarbons, allowing them to form more chemical bonds and react with other molecules.

b) A carbon-carbon double bond forms when two carbon atoms share two pairs of electrons. The double bond is formed by overlapping the two sp2 hybrid orbitals on each carbon atom.

c) The reaction between ethene and hydrogen bromide (HBr) is an example of an electrophilic addition reaction. In this reaction, HBr acts as an electrophile, meaning it is attracted to the electrons in the double bond of the ethene molecule. The electrons from the double bond are shared between the two atoms in the HBr molecule, forming a covalent bond. This process is known as nucleophilic attack.

The reaction mechanism is shown below:

Step 1: Electrophilic attack of the hydrogen atoms of HBr to the electrons in the double bond of the ethene molecule.

HBr + Ethene → H-Br + Carbocation

Step 2: Nucleophilic attack of a bromide ion on the carbocation, forming a new covalent bond.

Br− + Carbocation → H-Br + Bromoethane

To learn more about atoms

https://brainly.com/question/6258301

#SPJ1

The volume of the gas on a warm day when the temperature is 11 °C, given that the volume was initially 3000 L, is 2784.3 L

The following data were obtained from the question:

We can obtain the volume of the gas on the warm day by using Charles' law equation. This is shown below:

V₁ / T₁ = V₂ / T₂

3000 / 306 = V₂ / 284

Cross multiply

306 × V₂ = 3000 × 284

306 × V₂ = 852000

Divide both side by 306

V₂ = 852000 / 306

V₂ = 2784.3 L

Thus, the volume on the warm day is 2784.3 L

Learn more about volume:

https://brainly.com/question/14560487

#SPJ1

To draw a Lewis structure that obeys the octet rule for each of the molecules and ions listed, simply follow the steps outlined above and make sure that each atom has a formal charge of zero or close to zero.

For each of the molecules and ions listed, you can draw a Lewis structure that obeys the octet rule by following these steps:

1. Identify the central atom: The first atom listed in each molecule or ion is the central atom.

2. Count the number of valence electrons: Each atom has a certain number of valence electrons based on its position in the periodic table.

3. Form single bonds: Make single bonds between the central atom and each of the other atoms to use up the available valence electrons.

4. Add lone pairs: If the central atom still has electrons remaining, add lone pairs to satisfy the octet rule.

5. Check the formal charges: Make sure all atoms have formal charges of zero or close to zero.

Let's look at each molecule and ion individually:

a. POCl3, SO42−, XeO4, PO43−, ClO4−:

POCl3: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

SO42−: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.

XeO4: The central atom is xenon (Xe) and it has 8 valence electrons. We form single bonds between the Xe atom and each of the other atoms, giving Xe a total of 8 electrons. The formal charge of each atom is zero.

PO43−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

ClO4−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.

b. NF3, SO32−, PO33−, ClO3−:

NF3: The central atom is nitrogen (N) and it has 5 valence electrons. We form single bonds between the N atom and each of the other atoms, giving N a total of 8 electrons. The formal charge of each atom is zero.

SO32−: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.

PO33−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

ClO3−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.

c. ClO2−, SCl2, PCl2−:

ClO2−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.

SCl2: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.

PCl2−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.

For more such questions on Lewis structure

https://brainly.com/question/20300458

#SPJ11

(a). C7H5O2- is basic. The anion can act as a base by accepting a proton (H+) from water, forming benzoic acid and hydroxide ion:

C7H5O2- + H2O ⇌ C7H6O2 (benzoic acid) + OH-

(b). I- is neutral. The anion does not have the ability to accept or donate protons.

(c). NO3- is neutral. The anion does not have the ability to accept or donate protons.

(d). F- is basic. The anion can act as a base by accepting a proton (H+) from water, forming hydrofluoric acid and hydroxide ion:

F- + H2O ⇌ HF (hydrofluoric acid) + OH-

What is benzoic acid ?

Benzoic acid is a white crystalline solid with the chemical formula C7H6O2. It is a carboxylic acid, which means it has a carboxyl group (-COOH) as its functional group. Benzoic acid is naturally occurring in many plants and fruits, and is used as a food preservative due to its antimicrobial properties. It is also used in the production of various chemicals and drugs, including benzoyl chloride, benzyl alcohol, and phenylbutazone.

To know more about benzoic acid, visit:

https://brainly.com/question/24052816

#SPJ1

Answer:

Mg (s) + 2 HCl (aq) → MgCl 2 (aq) + H 2 (g)

Explanation:

The mass of the gas in the preceding problem is 30.1 g.

To find the molar mass or molecular weight of the gas, we'll use the Ideal Gas Law, which is given as: PV = nRT where, P = pressure of the gas V = volume of the gas n = number of moles of the gas R = ideal gas constant T = temperature of the gas We can rewrite the Ideal Gas Law as: M = (mRT) / (PV) where, M = molar mass or molecular weight of the gas m = mass of the gas R = ideal gas constant T = temperature of the gas P = pressure of the gas V = volume of the gas Substituting the given values in the above formula, we get: M = (30.1 g x 0.0821 L atm mol-1 K-1 x 273 K) / (1 atm x 0.228 L)≈ 29.1 g/mol Hence, the molar mass or molecular weight of the gas is approximately 29.1 g/mol.

for more such questions on mass

https://brainly.com/question/86444

#SPJ11

Answer:

2.00 M

Explanation:

In a titration, we can determine the concentration of an unknown acid by adding a known concentration of a base, such as NaOH, until the reaction is complete. At the endpoint of the reaction, the amount of base added is equal to the amount of acid present in the sample.

From the problem, we know that the NaOH solution has a concentration of 0.5 M, and that 24.8 mL of NaOH is required to completely react with the unknown acid in the flask. We can use this information to calculate the number of moles of NaOH that were added:

moles of NaOH = concentration x volume

moles of NaOH = 0.5 mol/L x 0.0248 L

moles of NaOH = 0.0124 moles

Since the reaction is a neutralization reaction between an acid and a base, the number of moles of NaOH added is equal to the number of moles of acid in the flask. Therefore, we can calculate the concentration of the acid using the volume of acid added:

moles of acid = moles of NaOH

moles of acid = 0.0124 moles

volume of acid = 6.2 mL = 0.0062 L

concentration of acid = moles of acid / volume of acid

concentration of acid = 0.0124 moles / 0.0062 L

concentration of acid = 2.00 M

Therefore, the exact concentration of the unknown acid is 2.00 M.

The mass of water driven off during popping can be calculated by subtracting the mass of the popped corn and the dish from the mass of the dish and kernel before heating.

Heating is the process of increasing the temperature of a substance or object, typically using an external energy source such as heat, radiation, or electrical current. The heat energy is transferred to the object or substance, causing its particles to vibrate and move faster, which results in an increase in temperature. Heating is commonly used in a wide range of applications, including cooking, chemical reactions, industrial processes, and space heating.

Cooking is the process of preparing food by applying heat, typically using methods such as baking, roasting, grilling, frying, boiling, simmering, steaming, or microwaving. The aim of cooking is to make food more palatable and easier to digest, as well as to kill harmful bacteria and other microorganisms that may be present in raw food. Cooking can also enhance the nutritional value of some foods by making certain nutrients more bioavailable.

To know more  about heating visit :

https://brainly.com/question/1429452

#SPJ1

Answer:

As the number of gas particles increases, the frequency of collisions with the walls of the container must increase. This, in turn, leads to an increase in the pressure of the gas. Flexible containers, such as a balloon, will expand until the pressure of the gas inside the balloon once again balances the pressure of the gas outside.

Explanation:

The curved arrows are as follows: P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ

The reactants and products of E2 reaction are given. The curved arrow mechanism needed to be depicted. The electron movement happens in such a way so that the incoming base extracts a proton and the removal of leaving group takes place.

E2 reaction: It stands for elimination reaction following second order kinetics. In E2 reaction, the base abstracts the

hydrogen and removal of the leaving group simultaneously in the same step. A general mechanism is shown below:

(n-x)

Step: 1

The base is the hydroxyl ion and the leaving group is bromine as shown below:

P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ; here x=0,1,2,...,n for 0≤p≤1

The hydroxyl ion is the base since it has the ability to donate a pair of electrons. The bromine is the leaving group since it can accommodate the negative charge. Generally, halogens are good leaving groups because they can accommodate the negative charge due to their high electronegativity.

Step: 2

The curved arrows are as follows:

P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ

The movement of electrons is in such a way as shown above because the base present that is hydroxyl ion can accept proton. Therefore, it extracts a proton. In an E2 reaction, the leaving group is removed at the same time. Therefore, the bromide ion is removed as it can bear the negative charge.

Learn more about electrons here: brainly.com/question/28977387

#SPJ4

Complete question is attached below