Answer:
nitrogen
nitrogen oxide
zincflorite
?
potassium oxide
Question 8
The temperature of a gas is 345K. What is this in degrees Celsius?
0 345°C
O 1.26°C
O 72°C
O 618°C
< Previous
HELLPPPPP i need to know ASAPPPPPPPP
What happens when chromium nitrate is added to distilled water
Answer:
It does not react with water, but reacts with most acids
Explanation:
Answer:
It doesn't react with water, but reacts with most acids
What characterizes a system at equilibrium?
O A. The system is changing at an even rate.
B. The system has stopped changing.
O C. The system cannot undergo change.
D. There is no net change to the system.
Answer:
D. There is no net change to the system
Explanation:
Equilibrium means "equal". In a chemical system, changes occur in substances called the reactants to produce another substance called the products. These changes from reactants to products and vice versa occur at an uneven rate until EQUILIBRIUM is reached.
In other words, equilibrium is attained when the reactants and products are formed at an equal or constant rate i.e. There is no net change to the system. For example, in the chemical system below:
A + B ⇌ C + D
This system is said to be at "EQUILIBRIUM" if the rate of reaction of the reactants (A and B) is equal to that of the products (C and D). That is, there is no net change (difference) in the reaction rate.
Which of the following changes are classified as physical changes?
-dissolving sugar in hot tea
-petrifying wood
-cutting an apple into smaller pieces
-carving wood
-Oburning wood
Someone help please!
Answer:
D
Explanation:
Does a rumor spread faster in a gym where all of
the students can move around freely, or in a classroom where students are
confined to desks? Develop an analogy for the difference in conductivity
between metals and ionic solids.
A rumor spread faster in a classroom where students are confined to desks than in a gym where all of the students can move around freely.
The same applies to conductivity between metals and ionic solids because metals have more close particles.
What is conductivity?Conductivity is the process by which a material is able to transfer electric charge or heat from one point to another without the actual movement of the particles of the substance.
The conductivity of substances varies from one substance to another.
The conductivity of solids is greater than the conductivity of that of other substances.
The conductivity of substances increases with a decrease in the distance between the particles of the substance.
Thus solids that have the closest particles have the highest conductivity.
Liquids have medium conductivity.
Gases have the least conductivity because they have the most spaced-out particles.
Learn more about conductivity at: https://brainly.com/question/24943129
#SPJ1
Match the landform to its description.
caldera
made of pieces of lava
volcanic soil
material fills in valleys
cinder cone
bowl-shaped depression
shield volcano
wide summit, gentle slope
lava plateau
rich in nutrients
Answer:
cinder cone: made of pieces of lava
shield volcano: wide summit, gentle slope
volcanic soil: rich in nutrients
caldera: bowl shaped depression
lava plateau: material fills in valleys
Explanation:
it’s right
Answer:
Caldera, Bowl-Shaped depression
Shield volcano, Wide summit, Gentle slope
Lava plateau, Material fills in valleys
Volcanic soil, Rich nutrients
Cinder Cone, Made of pieces of lava
Explanation:
Got it right on edge
6. What does a numerical subscript following a set of parentheses in a chemical
formula mean?
A numerical subscript following a set of parentheses represents the number of the group or poly-atomic ion in parentheses are present in a chemical formula.
As an example, calcium hydroxide is [tex]\bold { Ca(OH)_2 }[/tex] . The subscript (2) indicates that calcium hydroxide contains two hydroxide ions.
Therefore, A numerical subscript following a set of parentheses represents the number of the group or poly-atomic ion in parentheses are present in a chemical formula.
To know more about Chemical formula
https://brainly.com/question/17429336
You have two samples, one is calcite and the other is halite.
How would you differentiate between without using any equipment?
A- Colour
B- Specific gravity
C- Hardness
D- Cleavage
Answer:
c
Explanation:
You can differentiate between calcite and halite without using any measuring equipment based on: C. Hardness.
What is a mineral?A mineral can be defined as a form of naturally occurring, inorganic solid substance that is typically characterized by a crystal structure.
The properties of a mineral.In Science, the properties that can be used to identify and differentiate two or more minerals include the following:
LusterStreakHardnessIn conclusion, hardness is a mineral property that can be used to differentiate between calcite and halite without using any measuring equipment.
Read more on hardness here: https://brainly.com/question/24333064
what is unique about the intertidal coastline ?
Answer: The intertidal or littoral zone maintains a balance between the land and the sea. It provides a home to specially adapted marine plants and animals.
Explanation: The intertidal zone is the area where the ocean meets the land between high and low tides. A tide pool within Monterey Bay National Marine Sanctuary. Intertidal zones exist anywhere the ocean meets the land, from steep, rocky ledges to long, sloping sandy beaches and mudflats that can extend for hundreds of meters.
how can the movement of two plates can cause a trench?
Answer:
they move apart
Explanation:
when two tectonic plates move apart it causes a trench this is most common in oceans
Answer:In particular, ocean trenches are a feature of convergent plate boundaries, where two or more tectonic plates meet. At many convergent plate boundaries, dense lithosphere melts or slides beneath less-dense lithosphere in a process called subduction, creating a trench
Explanation:
The melting of a glacier is an example of the interactions among which of Earth's spheres? geosphere, troposphere, cryosphere atmosphere, geosphere, cryosphere atmosphere, asthenosphere, biosphere hydrosphere, asthenosphere, atmosphere
Answer:
The melting of a glacier is an example of interaction among;
Hydrosphere, asthenosphere, atmosphere
Explanation:
The melting of a glacier is an example of the interactions among the Earth's cryosphere and hydrosphere
The cryosphere is described as the portions on Earth where water appears in solid (frozen) form such as glaciers, frozen grounds, snow covered land, sea ice, ice sheets, river ice, ice caps, etc.
The hydrosphere is all the forms water on a planet including, ice, liquid water and water vapor, therefore, the cryosphere is a part of the hydrosphere
The geosphere comprises the Earth's interior, including the asthenosphere, which is fluid and hot and therefore spread heat through both conduction and convection to the hydrosphere that raises the ocean temperatures and lead to glacier melting
The green house effect in the atmosphere results in global warming that raises the average temperature of the Earth which in turn raises the temperature of the oceans and the troposphere, resulting in melting of a glacier
Therefore, the melting of a glacier is an example of interaction among the hydrosphere, asthenosphere, and, atmosphere
Which plant structures are common to all angiosperms?
spores
flowers
cones
endoskeleton
Answer:
B
Explanation:
what kind of change is heating of mercuric oxide?
Answer:
Chemical change.
Explanation:
When it is heated it decomposes into mercury and oxygen gas. The mercury oxide reactant becomes the silver color of mercury. Hence, a color change can be noticed throughout the reaction.
Answer:
chemical change
Explanation:
What determines whether a material melts or burns when heated?
The combustion temperature of a material determines whether a material melts or burns
Materials whose combustion temperatures are lower than their melting point gets burnt instead of melting, because before the temperature of the material is raised up to the melting point temperature, the materials gets combusted at a lower temperature known as the combustion temperature
Melting is physical change and is controlled by the physical property ( melting point ) while burning is chemical change which is irreversible.
Hence we can conclude that The combustion temperature of a material determines whether a material melts or burns
yoo someone help please
Answer: can I suck your super long di ck or titis
Explanation:
Answer:
hi
Explanation:
_______ dm^3 = 4.0 L
Answer:
[tex]4dm^{3}[/tex]
Explanation:
1dm^3 is equal to 1L.
All living organisms are composed of
I need help on this, i'll give 30 pts for brainliest
Answer:
All living organisms are made up of one or more cells, which are considered the fundamental units of life. Even unicellular organisms are complex! Inside each cell, atoms make up molecules, which make up cell organelles and structures. In multicellular organisms, similar cells form tissues.
Explanation:
Answer:
All living organisms are composed of one or more cell
Explanation:
hope this helps, please mark brainliest
How would you improve your experiment?
answer in 3 to 4 sentence
Answer:i will improve my my experiment by:
1.increasing the validity of that experiment
2.Improving of measurwment techniques
3.reduction of the simple bias
4.Blinding of the experiment
Explanation:
These can be achieved by doing these respectively,
1.Through considering the given time frame feo data collection and the experimental treat
2.Done by ensuring vessels are properly clibrated, are clean and ready to use as well as functioning
3.We can avoid this by doing convenience sampling and again ensuring target population arw properly defined.
4.we can avoid this by alerting the group members on the available group assignments and the data collectors.
PLSSS HELP ME
1) Which of these bonds is most easily broken?
1. All are equally easy to break
2. Hydrogen Bond
3. Ionic Bond
4. Covalent Bond
2)Hydrogen bonds are formed due to ______.
1. Electromagnetic attraction
2. Sharing of electrons
3. Stealing of electrons
4. 'Stickiness' due to protons and neutrons
3) What is a polar molecule?
1. A molecule found either at the north or south pole
2. A molecule with a positively charged end and a negatively charged end
3. A molecule with a distinct beginning and end
4. Any molecule that includes oxygen
4)Water tension is an example of ______.
1.Oxygen bonding
2.Hydrogen bonding
3.Isometric bonding
4. Covalent bonding
Answer:
1. 2)Hydrogen Bond
2. 1)Electromagnetic attraction
3. 2) A molecule with a positively charged end and a negatively charged end
4. 2.Hydrogen bonding
* i think i am right and i really hope so but please dont
count it against me babe.
explanation:
Individual hydrogen bonds are weak and easily broken; however, they occur in very large numbers in water and in organic polymers, creating a major force in combination. Hydrogen bonds are also responsible for zipping together the DNA double helix.
A hydrogen bond is formed when the positive end of one molecule is attracted to the negative end of another. The concept is similar to magnetic attraction where opposite poles attract. Hydrogen has one proton and one electron. This makes hydrogen an electrically positive atom because it has a deficiency of electrons.
A polar molecule is a chemical species in which the distribution of electrons between the covalently bonded atoms is not even. Some chemical species, such as chains of carbon molecules, share electrons equally and are said to be nonpolar molecules
Water molecules forming hydrogen bonds with one another. The partial negative charge on the O of one molecule can form a hydrogen bond with the partial positive charge on the hydrogens of other molecules. Water molecules are also attracted to other polar molecules and to ions.
9.
Which element is most likely to conduct heat and electricity?
A. Na B. Ca C.P D. Ne
Answer:
A. Na
Explanation:
Sodium is a good conductor of electricity and heat because it has only one electron in its valence shell.
i hope this helps :)
Answer:
C.) P
Explanation:
I believe this is correct, lmk if it's not.
complete combustion of wax take place in____ zone of a candle flame
Answer:
Non-luminous
Explanation:
Complete combustion of wax take place in non-luminous zone of a candle flame
5.Apply six atoms of Element A combined with eight atoms of Element B
to produce sic compound particles. How many atoms of Elements A and
B does each particle contain? Are all of the atoms used to form
compounds?
Answer:24
Explanation:axtizent
How does understanding how to affect the rate of reactions add value to your life? Why is this important for you to understand?
Answer:
because if you do not react to anything you will be a misarable old lady with 5 cats sitting on you .
Explanation: bascially you cant live without reacations to life
What role does the vulture playing this food web
Answer:
scavenger- eats dead carcasses
Explanation:
Unbend a paper clip such that
you have
a long, straight piece of metal. Bend one of the initially straight sections
back and forth several times. Does it become easier or harder to bend
the paper clip in the same spot? What happens if you keep bending the
paper clip back and forth?
uz RS nyodag
Metals have a crystalline in nature, and a consistent shift in stress causes the structure to alter, causing the metal to stiffen and fracture. This is known as metal fatige. The bending causes that to occur.
What is metal ?A metal is a substance that has a shiny look when freshly processed, polished, or shattered, and conducts electricity and heat rather effectively. Generally speaking, metals are malleable and ductile.
These characteristics are the outcome of the metallic link that exists between the metal's atoms or molecules.
The earth's crust is where most pure metals are found. They are discovered in ores, which are solid materials from which metals and minerals may be extracted. The majority of the planet's iron mass, which makes up over a third of its mass, is located in its core.
Thus, Metals have a crystalline in nature, and a consistent shift in stress causes the structure to alter.
To learn more about metal, follow the link;
https://brainly.com/question/18153051
#SPJ2
Describe the natural processes which remove carbon dioxide from the atmosphere
Answer:
Explanation:
The process is photosynthesis as plants need carbon dioxide and humans need oxygen so plants release oxygen which humans breath/take in and plant/trees take in carbon dioxide which humans release.
The natural process which removes carbon dioxide from the atmosphere is photosynthesis.
What is photosynthesis?
It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy through the process of cellular respiration.
Some of the energy which is converted is stored in molecules of carbohydrates like sugar and starches which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.
The process begins with proteins absorbing light energy which are called reaction centers and contain a green pigment which is called chlorophyll . In plants ,these pigments are present inside organelles called chloroplasts while in bacteria they are present in plasma membrane.
Learn more about photosynthesis,here:
https://brainly.com/question/29764662
#SPJ2
helpppp PLSSSSSSSSSSS
Answer:
I think 213g
Explanation:
Im not that smart in stuff based in this subject but I think its right but If anyone knows for sure fact check me plz....
Find the mass of 11.37 mol of BaO. Round to the nearest whole number.
Answer:
1,354
Explanation: