What is the percent yield if 160 g of O2 reacts with excess C3H8 to produce 66 g of CO2?

Answers

Answer 1

To calculate the percent yield, we need to first find the theoretical yield, which is the amount of product that would be obtained if the reaction proceeded perfectly.

The balanced chemical equation for the reaction between C3H8 and O2 to form CO2 and H2O is:

C3H8 + 5O2 → 3CO2 + 4H2O

According to the equation, 1 mole of C3H8 reacts with 5 moles of O2 to produce 3 moles of CO2. We can use this information to calculate the theoretical yield of CO2 that would be obtained if all the O2 reacted:

160 g O2 × (1 mol O2 / 32 g/mol O2) × (3 mol CO2 / 5 mol O2) × (44 g/mol CO2) = 277.5 g CO2 (theoretical yield)

Now, we can calculate the percent yield by dividing the actual yield by the theoretical yield and multiplying by 100:

percent yield = (actual yield / theoretical yield) × 100

In this case, the actual yield is given as 66 g CO2. Substituting this value into the equation gives:

percent yield = (66 g CO2 / 277.5 g CO2) × 100 ≈ 23.8%

Therefore, the percent yield of the reaction is approximately 23.8%.

To know more about percent yield refer here

https://brainly.com/question/17042787#

#SPJ11


Related Questions

give the mechanism for the reaction of diazomethane with cyclobutene

Answers

Answer:

The reaction between diazomethane and cyclobutene follows a concerted, cycloaddition mechanism known as the Wolff rearrangement.

Explanation:

In this mechanism, the diazomethane molecule undergoes a homolytic cleavage of the N=N bond to generate a carbene intermediate, which then rapidly undergoes a cycloaddition reaction with the double bond of cyclobutene. The resulting intermediate then undergoes a rearrangement, leading to the formation of a cyclobutanone product. Overall, the reaction proceeds through a concerted, one-step mechanism involving the formation and subsequent rearrangement of a carbene intermediate.

1. Diazomethane (CH2N2) acts as a nucleophile, attacking the double bond in cyclobutene.
2. The double bond in cyclobutene breaks, forming a new single bond with the carbon atom in diazomethane.
3. Simultaneously, one of the nitrogen atoms in diazomethane forms a new double bond with the carbon atom, while the other nitrogen atom leaves as a leaving group (N2 gas).
4. The result is a cyclobutene ring with a new methyl group (from diazomethane) and a new nitrogen atom double bonded to the carbon where the double bond in cyclobutene originally was.

In summary, the mechanism for the reaction of diazomethane with cyclobutene involves diazomethane attacking the double bond in cyclobutene, breaking the double bond, and forming a new methyl group and nitrogen double bond in the cyclobutene ring.

To know more about reaction with diazomethane with cyclobutene, visit:

https://brainly.com/question/15215905

#SPJ11

Use the tabulated half-cell potentials below to calculate ΔG° for the following balanced redox reaction. 3 I2(s) + 2 Fe(s) → 2 Fe3+(aq) + 6 I-(aq)

Answers

The ΔG° for the balanced redox reaction: 3 I₂(s) + 2 Fe(s) → 2 Fe₃⁺(aq) + 6 I⁻(aq) is -177.27 kJ/mol.

To calculate ΔG° for the given reaction, we need to use the formula:

ΔG° = -nFE°

where ΔG° is the standard free energy change, n is the number of electrons transferred in the reaction, F is the Faraday constant (96,485 C/mol), and E° is the standard electrode potential.

First, we need to write the half-reactions for the reaction:

Half-reaction for the reduction of Fe₃⁺ to Fe₂⁺:

Fe₃⁺(aq) + e⁻ → Fe₂⁺(aq)          E° = +0.771 V

Half-reaction for the oxidation of I⁻ to I₂:

2 I⁻(aq) → I₂(s) + 2 e⁻           E° = +0.535 V

To obtain the overall balanced redox reaction, we need to multiply the reduction half-reaction by 2 and add it to the oxidation half-reaction:

2 Fe₃⁺(aq) + 2 e⁻ → 2 Fe₂⁺(aq)        (multiplied by 2)

+ 2 I⁻(aq) → I₂(s) + 2 e⁻

--------------------------------------

3 I₂(s) + 2 Fe(s) → 2 Fe₃⁺(aq) + 6 I⁻(aq)

Now, we can calculate the standard free energy change ΔG° for the reaction using the formula above:

ΔG° = -nFE°

ΔG° = - (6 mol e⁻) × (96,485 C/mol) × (+0.306 V)

ΔG° = - 177,272 J/mol or -177.27 kJ/mol (rounded to 3 significant figures)

Therefore, the standard free energy change for the given balanced redox reaction is -177.27 kJ/mol.

Learn more about free energy: https://brainly.com/question/31170437

#SPJ11

Determine the oxidation state for each of the elements below. The oxidation state of iodine in iodic acid HIO; is The oxidation state of nitrogen in nitrosyl fluoride NOF is The oxidation state of fluorine in fluorine gas F2 is

Answers

1. The oxidation state of iodine in iodic acid HIO is +5.

2. The oxidation state of nitrogen in nitrosyl fluoride NOF is +2.

3. The oxidation state of fluorine in fluorine gas [tex]F_2[/tex] is 0.

1. Iodic acid (HIO):

To determine the oxidation state of iodine (I) in iodic acid (HIO), we start by assigning the oxidation state of hydrogen (H) as +1 since it is usually in this state when combined with nonmetals. The oxygen (O) atom in the compound will have an oxidation state of -2 since it is typically assigned this value in compounds.

We can then set up an equation to calculate the oxidation state of iodine (I):

(+1) + (x) + (-2) = 0

Simplifying the equation, we have:

x - 1 = 0

x = +1

Therefore, the oxidation state of iodine in iodic acid (HIO) is +5.

2. Nitrosyl fluoride (NOF):

For nitrosyl fluoride (NOF), we know that fluorine (F) typically has an oxidation state of -1 in compounds.

Let's assume that the oxidation state of nitrogen (N) in nitrosyl fluoride is x. The sum of the oxidation states in a compound should equal the overall charge, which is 0 for NOF.

We can set up the equation as follows:

x + (-1) + (-1) = 0

Simplifying the equation, we have:

x - 2 = 0

x = +2

Therefore, the oxidation state of nitrogen in nitrosyl fluoride (NOF) is +2.

3. Fluorine gas ([tex]F_2[/tex]):

In a molecule of fluorine gas ([tex]F_2[/tex]), both fluorine atoms are identical, and they share the same oxidation state. We can assume the oxidation state of each fluorine atom as x.

The sum of the oxidation states in a neutral molecule is always 0. Therefore, we can set up the equation as follows:

x + x = 0

Simplifying the equation, we have:

2x = 0

x = 0

Thus, the oxidation state of fluorine in fluorine gas ([tex]F_2[/tex]) is 0.

For more such questions on oxidation, click on:

https://brainly.com/question/13182308

#SPJ11

The oxidation state of iodine in iodic acid HIO4 is +5. The oxidation state of nitrogen in nitrosyl fluoride NOF is +1. The oxidation state of fluorine in fluorine gas F2 is 0.

The oxidation state of an element is the charge it would have if all the shared electrons in a compound were assigned to the more electronegative element.

In iodic acid HIO4, the oxidation state of oxygen is -2, and the sum of the oxidation states of all the atoms in the compound must equal the charge on the compound, which is 0.

Therefore, the oxidation state of iodine is +5. In nitrosyl fluoride NOF, the oxidation state of fluorine is -1, and the sum of the oxidation states of all the atoms in the compound must equal the charge on the compound, which is 0.

Therefore, the oxidation state of nitrogen is +1. In fluorine gas F2, the atoms are identical, and they share electrons equally, so the oxidation state of each fluorine atom is 0.

Learn more about oxidation state here :

https://brainly.com/question/17161178

#SPJ11

A neutralization reaction between an acid and a metal hydroxide produces View Avallable Hint(s) hydrogen gas. water and a salt Ooxygen gas. sodium hydroxide.

Answers

Neutralization reaction between an acid and a metal hydroxide produces water and a salt. This is because the acid and metal hydroxide react to form a salt and water through the transfer of hydrogen ions.


In a neutralization reaction, the acid donates a hydrogen ion (H+) to the hydroxide ion (OH-) from the metal hydroxide. This forms water (H2O) and a salt (an ionic compound made up of a positive ion from the metal and a negative ion from the acid). For example, the neutralization of hydrochloric acid (HCl) with sodium hydroxide (NaOH) produces water and sodium chloride (NaCl), which is a salt.

Examples of other acid-base reactions are neutralization of a strong acid with a weak base or the neutralization of a weak acid with a strong base. Additionally, the practical applications of neutralization reactions are in industries such as agriculture and medicine.

To learn more about neutralization reaction visit:

brainly.com/question/28970253

#SPJ11

Determine if the following descriptions apply to the sulfur cycle or to the phosphorus cycle and sort them accordingly. Items (6 items) (Drag and drop into the appropriate area below) a. Includes both oxidized and reduced forms of the element b. Involves an Provides a element that is nutrient that is present in nucleic limiting in most acids, membrane ecosystems lipids, and on some proteins c. Provides a nutrient that is not limited in most ecosystems d. Involves an element that is present in proteins and cofactors e. Includes the oxidized form of the element almost exclusively

Answers

The descriptions that apply to the sulfur cycle are a. Includes both oxidized and reduced forms of the element, c. Provides a nutrient that is not limited in most ecosystems, and d. Involves an element that is present in proteins and cofactors. The descriptions that apply to the phosphorus cycle are b. Involves an Provides a element that is nutrient that is present in nucleic limiting in most acids, membrane ecosystems lipids, and on some proteins and e. Includes the oxidized form of the element almost exclusively.

The sulfur cycle and phosphorus cycle are both biogeochemical cycles that involve the movement of elements through the environment, organisms, and back to the environment.

a. The sulfur cycle includes both oxidized (e.g., sulfate) and reduced forms (e.g., sulfide) of the element. These different forms of sulfur are exchanged between the atmosphere, hydrosphere, and living organisms.

b. The phosphorus cycle involves an element that is present in nucleic acids, membrane lipids, and some proteins. This nutrient is often limiting in most ecosystems, as it is a crucial component for the growth and maintenance of living organisms.

c. The sulfur cycle provides a nutrient that is not limited in most ecosystems. Sulfur is relatively abundant in the environment, making it less likely to be a limiting factor for the growth of organisms.

d. The sulfur cycle also involves an element that is present in proteins and cofactors, such as in the amino acids cysteine and methionine, and in iron-sulfur clusters.

e. The phosphorus cycle includes the oxidized form of the element almost exclusively, as phosphate (PO4^3-). This form is the primary component in many biological molecules and can be readily utilized by living organisms.

In summary, the sulfur cycle (a, c, d) includes both oxidized and reduced forms of the element, provides a nutrient not limited in most ecosystems, and involves an element present in proteins and cofactors. The phosphorus cycle (b, e) involves an element that is present in nucleic acids, membrane lipids, and some proteins, and is often limiting in ecosystems; it includes the oxidized form of the element almost exclusively.

Learn more about sulfur cycle here: https://brainly.com/question/28477168

#SPJ11

How much zinc can be collected from a 25g sample of ZnO?

Answers

To determine the amount of zinc that can be collected from a 25g sample of ZnO, you need to calculate the theoretical yield of zinc. This can be done by using the stoichiometry of the balanced chemical equation and the molar masses of ZnO and Zn.

The balanced chemical equation for the reaction between ZnO and an appropriate reducing agent, such as carbon, can be represented as follows:

ZnO + C → Zn + CO

From the equation, we can see that the stoichiometric ratio between ZnO and Zn is 1:1. This means that for every 1 mole of ZnO reacted, 1 mole of Zn is produced.

To calculate the theoretical yield of zinc, we need to convert the mass of ZnO to moles using its molar mass, and then use the stoichiometric ratio to find the corresponding moles of Zn. Finally, we can convert the moles of Zn to grams using the molar mass of Zn.

The molar mass of ZnO is the sum of the atomic masses of zinc (Zn) and oxygen (O), which is approximately 81.38 g/mol. Using the molar mass of Zn (65.38 g/mol), we can now perform the calculation:

Theoretical yield of Zn = (25 g ZnO) × (1 mol ZnO/81.38 g ZnO) × (1 mol Zn/1 mol ZnO) × (65.38 g Zn/1 mol Zn)

Simplifying the calculation, the theoretical yield of Zn from a 25g sample of ZnO is obtained.

Learn more about stoichiometry here: https://brainly.com/question/14935523

#SPJ11

Consider the reaction that occurs when copper is added to nitric acid. Cu(s) 4HNO3(aq) mc024-1. Jpg Cu(NO3)2(aq) 2NO2(g) 2H2O(l) What is the reducing agent in this reaction? Cu NO3– Cu(NO3)2 NO2.

Answers

In the reaction between copper (Cu) and nitric acid (HNO_{3}), copper acts as the reducing agent.

In a chemical reaction, the reducing agent is the species that donates electrons, leading to a decrease in its oxidation state. In the given reaction, copper (Cu) undergoes oxidation, losing electrons to form Cu^{+2}ions in the product [tex]Cu(NO_{3}) _{2}[/tex].

Cu(s) → [tex]Cu^{+2}[/tex](aq) + 2e-

The oxidation state of copper increases from 0 in the reactant (Cu) to +2 in the product (Cu2+). This indicates that copper loses electrons and gets oxidized. On the other hand, nitric acid (HNO_{3}) is the oxidizing agent in the reaction since it accepts electrons during the reaction. Nitric acid is reduced as nitrogen in HNO_{3} gains electrons and goes from +5 oxidation state to +4 oxidation state in [tex]NO_{2}[/tex]

[tex]HNO_{3}[/tex](aq) + 3e- → NO2(g) + 2[tex]H_{2}O[/tex](l)

Therefore, copper is the reducing agent in this reaction as it undergoes oxidation by losing electrons, while nitric acid acts as the oxidizing agent by accepting those electrons and getting reduced.

Learn more about  oxidation here: https://brainly.com/question/31844777

#SPJ11

In the Thermo Fisher application note about wine analysis (Lesson 3), a calibration curve was generated for catechin. Use the equation from the calibration curve to predict analyte concentration in an unknown sample with a peak area of 72050.
Choose one answer:
a. 33.8 μg/mL
b. 100.3 μg/mL
c. 43.7 μg/mL
d. 28.5 μg/mL

Answers

Using the information provided, you would use the calibration curve equation to predict the catechin concentration in the unknown sample with a peak area of 72050.

To predict the analyte concentration in an unknown sample with a peak area of 72050, we need to use the equation from the calibration curve for catechin. However, the calibration curve equation is not provided in the question. Therefore, we cannot provide a direct answer to this question without the calibration curve equation.

However, we can provide a general approach to solving this problem. The calibration curve is typically generated by analyzing standard solutions of known concentrations and plotting the peak area versus the concentration. The equation of the line or curve that best fits the data can then be determined. Once we have the equation, we can use it to predict the concentration of an unknown sample with a given peak area.

To know more about calibration visit:-

https://brainly.com/question/8137688

#SPJ11

which one of the following compounds is insoluble in water? a. pbso4 b. nano3 c. rb2co3 d. k2so4

Answers

Compound a. PbSO₄ is insoluble in water. When a compound is insoluble in water, it means that it cannot dissolve in water.

In the case of PbSO₄, it has a low solubility in water and can only dissolve to a very small extent. On the other hand, compounds b, c, and d are soluble in water.


When a compound is insoluble in water, it means that it has a very low solubility and cannot dissolve in water. The solubility of a compound depends on the nature of the compound, its structure, and the nature of the solvent. In the case of PbSO₄, it has a low solubility in water and can only dissolve to a very small extent.

On the other hand, compounds b, c, and d are soluble in water. Compound b, NaNO₃, is a salt and can dissolve in water to form Na⁺ and NO³⁻ ions. Similarly, compound c, Rb₂CO₃, is a salt that can dissolve in water to form Rb+ and CO₃²⁻ ions. Compound d, K₂SO₄, is also a salt that can dissolve in water to form K⁺ and SO₄²⁻ ions.

In conclusion, compound a, PbSO₄, is insoluble in water, while compounds b, c, and d are soluble in water.

To know more about solubility, visit:

https://brainly.com/question/28170449

#SPJ11

If I have 5.0 moles of bromine gas that is kept at 46.7 oC in a 1.4 L container, what is the pressure of the container? (R = 0.0821 (L*atm)/(mol*K))

Round your answer to 1 decimal place.

Answers

The pressure of the container is approximately 94.0 atm when there are 5.0 moles of bromine gas at a temperature of 46.7°C in a 1.4 L container.

To determine the pressure of the container, we can use the ideal gas law, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:

T = 46.7 + 273.15 = 319.25 K

Next, we can substitute the given values into the ideal gas law equation:

PV = nRT

P * 1.4 L = 5.0 mol * (0.0821 (Latm)/(molK)) * 319.25 K

Simplifying the equation:

P * 1.4 L = 131.4935 (L*atm)

Dividing both sides of the equation by 1.4 L:

P = 131.4935 (L*atm) / 1.4 L

P ≈ 94.0 atm

Therefore, the pressure of the container is approximately 94.0 atm when there are 5.0 moles of bromine gas at a temperature of 46.7°C in a 1.4 L container.

FOr more such questions on bromine gas visit:

https://brainly.com/question/28382535

#SPJ11

9. In a chemical reaction, the percentage yield was 90.0% and the theoretical yield was 1.0g. What was the actual yield of the reaction?


10. The percentage yield for the reaction below is 83.2%. What mass of PCls is expected from the reaction of 73.7 g PC13 with excess chlorine?

PC13 + Cl2 → PCls

Answers

9.The actual yield of the reaction was 0.900 g.

10. The mass of PCls expected from the reaction is 79.6 g

Percentage yield is the ratio of the actual yield to the theoretical yield, expressed as a percentage. In this case, the percentage yield is given as 90.0%, and the theoretical yield is given as 1.0 g. Therefore, we can calculate the actual yield by multiplying the theoretical yield by the percentage yield a

s a decimal:

Actual yield = 1.0 g x 0.900 = 0.900 g.

10. The mass of PCls expected from the reaction is 79.6 g.

To calculate the mass of PCls expected from the reaction, we need to first determine the theoretical yield of PCls using stoichiometry. The balanced chemical equation for the reaction is:

PC13 + Cl2 → PCls

From this equation, we can see that one mole of PC13 reacts with one mole of Cl2 to produce one mole of PCls. Therefore, the number of moles of PCls produced is equal to the number of moles of the limiting reactant (in this case, PC13). To determine the number of moles of PC13, we can divide the given mass by the molar mass:

moles of PC13 = 73.7 g / (30.97 g/mol) = 2.38 mol

Since the molar ratio of PC13 to PCls is 1:1, we know that the theoretical yield of PCls is also 2.38 mol. To convert this to grams, we can multiply by the molar mass:

theoretical yield of PCls = 2.38 mol x (139.33 g/mol) = 331 g

Finally, we can use the percentage yield to calculate the actual yield:

actual yield = theoretical yield x percentage yield/100

actual yield = 331 g x 83.2/100 = 276 g

Therefore, the mass of PCls expected from the reaction is 79.6 g.

To learn more about Percentage yield here:

https://brainly.com/question/1379589

#SPJ1

for a certain acid pka = 5.73. calculate the ph at which an aqueous solution of this acid would be 0.51 issociated. round your answer to 2 decimal places.

Answers

When an aqueous solution of this acid with a pKa of 5.73 is 0.51 dissociated, the pH of the solution is about 5.75.

To calculate the pH at which an aqueous solution of this acid would be 0.51 dissociated, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log ([A-]/[HA])

Given the pKa of the acid is 5.73, and the acid is 0.51 dissociated, we can determine the ratio of the dissociated form ([A-]) to the undissociated form ([HA]):

0.51 dissociated means 0.49 (1 - 0.51) of the acid remains undissociated. So, the ratio [A-]/[HA] = 0.51/0.49.

Now, we can plug these values into the Henderson-Hasselbalch equation:

pH = 5.73 + log (0.51/0.49)

Solving for pH, we get:

pH ≈ 5.73 + 0.018 = 5.748

Rounded to two decimal places, the pH is approximately 5.75.

We determined this by using the Henderson-Hasselbalch equation and considering the ratio of dissociated to undissociated acid.

You can learn more about aqueous solutions at: brainly.com/question/2159485

#SPJ11

Isocitrate dehydrogenase is found only in mitochondria, but malate dehydrogenase is found in both cytosol and mitochondria. What is the role of cytosolic malate dehydrogenase?

Answers

The role of cytosolic malate dehydrogenase is to facilitate the transfer of reducing equivalents from the cytosol to the mitochondria, contributing to cellular energy production.

Cytosolic malate dehydrogenase plays a crucial role in the malate-aspartate shuttle. This shuttle facilitates the transfer of reducing equivalents (NADH) from the cytosol to the mitochondria, which is essential for energy production. The process involves the following steps:

1. Cytosolic malate dehydrogenase catalyzes the conversion of cytosolic oxaloacetate to malate, using NADH to produce NAD+.
2. Malate is then transported into the mitochondria, where it is converted back to oxaloacetate by mitochondrial malate dehydrogenase, regenerating NADH in the mitochondria.
3. This NADH is used in the mitochondrial electron transport chain to produce ATP, the primary energy currency of the cell.

In summary, the role of cytosolic malate dehydrogenase is to facilitate the transfer of reducing equivalents from the cytosol to the mitochondria, contributing to cellular energy production.

Learn more about mitochondria at: https://brainly.com/question/15159664

#SPJ11

Identify the type of heat transfer occurring in each situation.

You feel heat from a campfire.


Credit
A mug filled with a hot beverage warms your hands.


Credit
A heat lamp keeps baby chicks warm.


Credit
Warm water moves from the bottom of a pot to the top.


Credit
Thunderclouds form in the atmosphere.


Credit
A snowball melts in your hands.


Credit
A hot dog cooks over a campfire.


Credit
A cool breeze blows onto the beach on a hot day.


Credit
The Sun causes snow to sublimate on a clear winter day.


Credit
A spoon placed in a cup of hot tea becomes hot to the touch.

Answers

You feel heat from a campfire: Radiation

A mug filled with a hot beverage warms your hands: Conduction

A heat lamp keeps baby chicks warm: Radiation

Warm water moves from the bottom of a pot to the top: Convection

Thunderclouds form in the atmosphere: Convection

A snowball melts in your hands: Conduction

A hot dog cooks over a campfire: Conduction

A cool breeze blows onto the beach on a hot day: Convection

The Sun causes snow to sublimate on a clear winter day: Radiation

A spoon placed in a cup of hot tea becomes hot to the touch: Conduction

Heat can be transferred through three different methods: conduction, convection, and radiation. Conduction is the transfer of heat through direct contact between two objects. Convection is the transfer of heat by the movement of a fluid, such as air or water. Radiation is the transfer of heat through electromagnetic waves.

In the given situations, the heat transfer by radiation occurs from the campfire, heat lamp, and sun. Conduction occurs when you feel the warmth of a hot beverage or the hot dog cooking over the campfire. Convection occurs in the atmosphere, where warm air rises, and cool air falls, leading to thundercloud formation, or when warm water moves from the bottom of a pot to the top.

To know more about the Heat transfer, here

https://brainly.com/question/13433948

#SPJ1

q1) describe and illustrate the solidification process of a pure metal in terms of the nucleation and growth of crystals.

Answers

The solidification process of a pure metal can be described and illustrated through nucleation and growth of crystals cooling the liquid metal leads to the formation of solid nuclei, which then grow as atoms attach themselves to the structure.

Nucleation is the initial formation of a small solid crystal in a liquid metal during cooling, this occurs when the temperature of the liquid metal drops below its melting point, causing atoms to arrange themselves in a more structured manner, forming a solid nucleus. The number of nucleation sites and the rate of nucleation determine the final crystal size and structure. Once nucleation has occurred, the growth of crystals begins as the surrounding liquid metal continuously cools. Atoms from the liquid metal attach themselves to the crystal nucleus, resulting in the growth of the crystal structure, the growth rate depends on the temperature gradient and the degree of undercooling, with faster growth occurring at higher temperature gradients.

During solidification, the crystals grow in different directions until they meet other growing crystals, eventually filling the entire volume of the metal, the boundaries where these crystals meet are called grain boundaries. The size and distribution of the crystals or grains can affect the mechanical properties of the metal, such as strength and ductility. In summary, the solidification process of a pure metal involves nucleation and growth of crystals. Cooling the liquid metal leads to the formation of solid nuclei, which then grow as atoms attach themselves to the structure. The final crystal size, structure, and mechanical properties of the metal depend on nucleation and growth rates.

To learn more about nucleation here:

https://brainly.com/question/31676806

#SPJ11

________ is isoelectronic with helium. o2- be b4 c4 ne

Answers

The ion that is isoelectronic with helium is the neon ion (Ne).

Isoelectronic species are atoms, ions or molecules that have the same number of electrons. Since helium has two electrons, any ion or atom with two electrons is isoelectronic with helium.

Among the options given in the question, the neon ion (Ne+) is the only one that has two electrons, making it isoelectronic with helium. Neon has ten electrons, and when it loses one electron to become an ion, it becomes isoelectronic with helium.

Neon is in the same period as oxygen, boron, and carbon, but these elements have a different number of electrons than helium. Oxygen has eight electrons, boron and carbon have five and six electrons respectively, and neon has ten electrons.

To know more about helium:

https://brainly.com/question/1780577

#SPJ11

If the temperature of a liquid drops from 27°C to 3°C, what happened to


the molecules? *


A: the molecules for farther apart


B: The molecules started moving slower


C: the fuel gained cold molecules


D: the molecules became smaller in size

Answers

When the temperature of a liquid drops from 27°C to 3°C, the molecules of the liquid started moving slower and came closer together. Therefore, the correct option is B. The molecules started moving slower.

What is temperature?

Temperature is a measure of the average kinetic energy of the particles in a system. The faster the particles move, the higher the temperature. The slower the particles move, the lower the temperature.

What happens when the temperature decreases?

If the temperature of a substance decreases, the kinetic energy of its molecules also decreases. This causes the particles to move more slowly and come closer together. This leads to a decrease in the volume of the substance.

To learn more about molecules, refer:-

https://brainly.com/question/32298217

#SPJ11

The Sun's energy production is due to the fusion of 1H into 4He . How does the mass of four 1h nuclei (4mh) compare with the mass of one ""He nucleus (mhe)? A. 4mH = mHe B. 4mH mHe D. It cannot be determined without knowing the amount of energy released.

Answers

The mass of four [tex]^1H[/tex] nuclei ([tex]^4mH[/tex]) is equal to the mass of one [tex]^4He[/tex] nucleus (mHe), making the equation [tex]^4mH[/tex] = mHe (option a). The amount of energy released does not affect this relationship .

- The fusion of [tex]^1H[/tex] (hydrogen) into [tex]^4He[/tex] (helium) is a process that occurs in the core of the Sun, where temperatures and pressures are extremely high.

- During this process, four hydrogen nuclei ([tex]^1H[/tex]) combine to form one helium nucleus ([tex]^4He[/tex]).

- The mass of a single hydrogen nucleus is approximately 1 atomic mass unit (amu), while the mass of a helium nucleus is approximately 4 amu.

- Therefore, the mass of four hydrogen nuclei ([tex]^4mH[/tex]) is equal to 4 amu, while the mass of one helium nucleus (mHe) is equal to 4 amu.

- Combining these values, we get: [tex]^4mH[/tex] = mHe.

- This relationship between mass and nuclear reactions is described by Einstein's famous equation, E= [tex]mc^2[/tex], which shows that mass and energy are interchangeable.

- However, the amount of energy released by the fusion reaction does not affect the mass of the nuclei involved in the reaction, so the answer is not dependent on the amount of energy released.

For more such questions on nucleus, click on:

https://brainly.com/question/3992688

#SPJ11

The probable question may be:

The Sun's energy production is due to the fusion of [tex]^1H[/tex] into [tex]^4He[/tex]. How does the mass of four [tex]^1H[/tex] nuclei (4mH) compare with the mass of one [tex]^4He[/tex] nucleus (MHe)?

A. [tex]^4mH[/tex] =MHe

B. [tex]^4mH[/tex] <MHe

C.  [tex]^4mH[/tex] > mHe

D. It cannot be determined without knowing the amount of energy released.

The Sun's energy production is due to the fusion of 1H into 4He, the mass of four 1h nuclei (4mh) compare with the mass of one He nucleus, the correct answer is B, 4mH > mHe.

During the fusion of four hydrogen nuclei into a helium nucleus, some of the mass is converted into energy in accordance with Einstein's famous equation E=mc².

This means that the mass of the four hydrogen nuclei (4mH) is slightly greater than the mass of one helium nucleus (mHe). The difference in mass is converted into energy according to the equation E = Δmc², where Δm is the difference in mass and c is the speed of light.

The amount of energy released by the fusion of four hydrogen nuclei into a helium nucleus is enormous and powers the Sun's energy production.

This fusion reaction occurs in the Sun's core at temperatures of about 15 million degrees Celsius and pressures about 250 billion times atmospheric pressure.

Learn more about helium here :

https://brainly.com/question/5596460

#SPJ11

Write a balanced chemical equation for the reaction of aqueous potassium hydroxide with aqueous nickel (ii) chloride to form solid nickel (ii) hydroxide and aqueous potassium chloride.

Answers

The balanced chemical equation for the reaction of aqueous potassium hydroxide with aqueous nickel (II) chloride to form solid nickel (II) hydroxide and aqueous potassium chloride is: 2KOH(aq) + NiCl₂(aq) → Ni(OH)₂(s) + 2KCl(aq)

This equation is balanced with respect to both the reactants and the products. It shows that two moles of aqueous potassium hydroxide (KOH) react with one mole of aqueous nickel (II) chloride (NiCl₂) to yield one mole of solid nickel (II) hydroxide (Ni(OH)₂) and two moles of aqueous potassium chloride (KCl).

In this reaction, the potassium hydroxide (KOH) acts as a base and reacts with the nickel (II) chloride (NiCl₂) which acts as an acid to produce nickel (II) hydroxide (Ni(OH)₂), a solid precipitate, and potassium chloride (KCl), which remains in solution.

The balanced chemical equation provides information about the stoichiometry of the reactants and products involved in the reaction, and it ensures that the law of conservation of mass is satisfied.

learn more about Chemical equation here:

https://brainly.com/question/28294176

#SPJ11

given the reactant br−br, add curved arrows to show homolytic bond cleavage, then draw the expected product. be sure to add any charges and nonbonding electrons that result from the cleavage.

Answers

Homolytic bond cleavage of Br-Br produces two bromine radicals with a single unpaired electron on each atom.

In the homolytic bond cleavage of Br-Br, the bond between the two bromine atoms breaks, and each atom receives one electron from the bond.

This results in the formation of two bromine radicals (Br•), with each atom having a single unpaired electron.

There are no charges formed in this process, as the cleavage leads to equal distribution of the shared electrons.

In a molecular diagram, curved arrows can be drawn to indicate the movement of electrons towards each bromine atom, with the product showing the bromine radicals and their unpaired electrons.

For more such questions on electron, click on:

https://brainly.com/question/26084288

#SPJ11

Br-Br's homolytic bond is broken into two bromine radicals, each of which has one unpaired electron.

The link between the two bromine atoms is broken during the homolytic bond cleavage of Br-Br, and each atom gains an electron as a result. As a result, two bromine radicals (Br•) are created, each of which has one unpaired electron. Since the shared electrons are distributed equally as a result of the cleavage, no charges are created during this process. The bromine radicals and their unpaired electrons can be seen when curved arrows are used to represent the passage of electrons towards each bromine atom in a molecular diagram.  Two curved arrows starting from the bond between the two Br atoms, indicating homolytic bond cleavage, resulting in two Br radicals (each with one unpaired electron). The expected product is two Br• radicals.

learn more about homolytic here:

https://brainly.com/question/20475991

#SPJ11

a buffer that contains 0.18 m of a base, b and 0.41 m of its conjugate acid bh , has a ph of 8.58. what is the ph after 0.019 mol of ba(oh)2 are added to 0.75 l of the solution?

Answers

After adding 0.019 mol of Ba(OH)₂ to 0.75 L of the solution, the pH of the solution is approximately 12.70. To determine the pH of the solution after adding Ba(OH)₂, we need to consider the reaction between Ba(OH)₂ and the conjugate acid (BH) in the buffer solution.

The balanced equation for the reaction is:

BH + Ba(OH)₂ → B + Ba²⁺ + 2OH⁻

To calculate the final concentration of BH and B, we need to determine the new moles of BH and B after the reaction.

Moles of BH remaining = nBH - nBa(OH)₂ = 0.135 mol - 0.019 mol = 0.116 mol

Moles of B formed = nBa(OH)₂ = 0.019 mol

Now we can calculate the final concentrations of BH and B in the solution:

Final concentration of BH = Moles of BH remaining / V = 0.116 mol / 0.75 L = 0.155 M

Final concentration of B = Moles of B formed / V = 0.019 mol / 0.75 L = 0.025 M

Next, we can calculate the pOH of the solution using the concentration of hydroxide ions (OH⁻):

pOH = -log[OH⁻]

pOH = -log(2 * Final concentration of B)

pOH = -log(2 * 0.025) ≈ -log(0.05) ≈ 1.30

Since pH + pOH = 14, we can calculate the pH:

pH = 14 - pOH

pH = 14 - 1.30

pH ≈ 12.70

Learn more about the buffer: https://brainly.com/question/31605089

#SPJ11

Make a list of the four quantum numbers n, l, ml, and s for each of the 12 electrons in the ground state of the magnesium atom. Check all that apply.A. n = 1, l = 0, ml = 0, s = ±1/2B. n = 3, l = 2, ml = 0, s = ±1/2C. n = 2, l = 1, ml = 0, s ±1/2D. n = 1, l = 0, ml = 1, s = ±1/2E. n = 3, l = 1, ml = 1, s = ±1/2F. n = 2, l = 1, ml = -1, s = ±1/2G. n = 2, l= 1, ml = 1, s = ±1/2

Answers

The ground state electron configuration of magnesium is 1s²2s²2p⁶. Therefore, the four quantum numbers for each of the 12 electrons in the ground state of the magnesium atom can be determined as follows:

First electron:

n = 1, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Second electron:

n = 1, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Third electron:

n = 2, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Fourth electron:

n = 2, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Fifth electron:

n = 2, l = 1, ml = -1, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Sixth electron:

n = 2, l = 1, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Seventh electron:

n = 2, l = 1, ml = 1, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Eighth electron:

n = 2, l = 1, ml = -1, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Ninth electron:

n = 2, l = 1, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Tenth electron:

n = 2, l = 1, ml = 1, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Eleventh electron:

n = 3, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Twelfth electron:

n = 3, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)

Therefore, the correct options are:

A. n = 1, l = 0, ml = 0, s = ±1/2 (first and second electrons)

C. n = 2, l = 1, ml = 0, s = ±1/2 (sixth and ninth electrons)

E. n = 3, l = 1, ml = 1, s = ±1/2 (fifth electron)

F. n = 2, l = 1, ml = -1, s = ±1/2 (eighth electron)

G. n = 2, l = 1, ml = 1, s = ±1/2 (tenth electron)

To know more about electron configuration  refer here

https://brainly.com/question/31812229#

#SPJ11

A gas contains 4.63 g N2 in a 2.20 L container at 38 °C. What is the pressure of this sample? O a. 0.234 atm O b.191 Torr Oc. 1504 atm O d. 0.234 Torr O e. 1.91 atm

Answers

To calculate the pressure of the gas sample, we need to use the Ideal Gas Law equation: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.                                                          

First, we need to convert the mass of N2 to moles by dividing by its molar mass (28 g/mol): 4.63 g N2 / 28 g/mol = 0.165 moles. We also need to convert the temperature to Kelvin by adding 273.15: 38 °C + 273.15 = 311.15 K. Plugging in the values, we get: P x 2.20 L = 0.165 moles x 0.08206 L.atm/mol.K x 311.15 K. Solving for P, we get P = 1.91 atm. Therefore, the answer is e. 1.91 atm.
Convert the temperature to Kelvin: 38°C + 273.15 ≈ 311.15 K. Now, plug in the values: P * 2.20 L = 0.165 mol * 0.0821 L atm / (mol K) * 311.15 K. Solving for P, we get P ≈ 0.234 atm. Therefore, the pressure of this sample is 0.234 atm (Option a).

Learn more about Ideal Gas Law here:
https://brainly.com/question/12624936

#SPJ11

Given the following reaction: 2D(g) 3E(g)F(g) 4G(g) H(g) a) When the concentration of D is decreasing by 0.10 M/s, how fast is the concentration of H [ Select ] increasing? b) When the concentration of G is increasing by 0.20 M/s, how fast is the concentration of E [Select ] decreasing? [Select ] c)What is the rate of reaction?

Answers

In the given reaction, 2D(g) + 3E(g) → F(g) + 4G(g) + H(g), the rate of change of concentrations is related to the stoichiometric coefficients.                                                                                                                                                                          

a) Using the stoichiometry of the reaction, we can see that for every 2 moles of D that react, 4 moles of H are produced. Therefore, the rate of increase in the concentration of H is 0.20 M/s.
b) Again using the stoichiometry, for every 4 moles of G that react, 3 moles of E are consumed. Therefore, the rate of decrease in the concentration of E is 0.15 M/s.
c) The rate of reaction can be determined by monitoring the concentration of any reactant or product over time. In this case, we could choose to monitor the concentration of any of the five species involved.
In this case, using D's decrease of 0.10 M/s, the rate of reaction is 0.05 M/s.

Learn more about stoichiometric coefficients here:
https://brainly.com/question/32088573

#SPJ11

when this equation is balanced with the smallest set of whole numbers, what is the coefficient for n2? ___n2h4(g) ___n2o4(g)___n2(g) ___h2o(g)

Answers

The balanced equation for the reaction:

n2h4(g) + n2o4(g) → n2(g) + h2o(g)

is:

2N2H4(g) + N2O4(g) → 3N2(g) + 4H2O(g)

The coefficient for n2 in the balanced equation is 3.

The given chemical equation is:

n2h4(g) + n2o4(g) → n2(g) + 2h2o(g)

To balance this equation with the smallest set of whole numbers, we need to adjust the coefficients in front of the chemical formulas until we have the same number of each type of atom on both sides of the equation.

First, we can balance the nitrogen atoms by placing a coefficient of 1 in front of N2 on the right-hand side:

n2h4(g) + n2o4(g) → 2n2(g) + 2h2o(g)

Next, we balance the hydrogen and oxygen atoms by placing a coefficient of 4 in front of H2O on the right-hand side:

n2h4(g) + n2o4(g) → 2n2(g) + 4h2o(g)

Now we have the same number of each type of atom on both sides of the equation. Therefore, the coefficient for N2 is 2.

Therefore, the balanced chemical equation is:

N2H4(g) + N2O4(g) → 2N2(g) + 4H2O(g)

Click the below link, to learn more about Balancing equation:

https://brainly.com/question/12405075

#SPJ11

The solubility of Cu(OH)2 (s) is 1.92 x 10 –6 gram per 100. milliliters of solution at 30°C.-Calculate the solubility (in moles per liter) of Cu(OH)2 at 30°C.-Calculate the value of the solubility product constant, Ksp, for Cu(OH)2 at 30°C.

Answers

The solubility of Cu(OH)2 at 30°C is 1.02 x 10^-19 moles per liter. The value of the solubility product constant, Ksp, for Cu(OH)2 at 30°C is 1.2 x 10^-20.

To calculate the solubility of Cu(OH)2 (s) in moles per liter at 30°C, we first need to convert the given solubility in grams per 100 milliliters to moles per liter. We can do this by using the molar mass of Cu(OH)2, which is 97.56 g/mol.

Solubility of Cu(OH)2 (s) = 1.92 x 10^-6 g/100 ml = 1.92 x 10^-5 g/L

Moles of Cu(OH)2 = 1.92 x 10^-5 g / 97.56 g/mol = 1.97 x 10^-7 mol/L

Therefore, the solubility of Cu(OH)2 in moles per liter at 30°C is 1.97 x 10^-7 mol/L, or 1.02 x 10^-19 moles per liter.

The solubility product constant, Ksp, can be calculated using the solubility of Cu(OH)2 in moles per liter:

Cu(OH)2 (s) ⇌ Cu2+ (aq) + 2OH- (aq)

Ksp = [Cu2+][OH-]^2

Since Cu(OH)2 dissociates into 1 Cu2+ ion and 2 OH- ions, we can substitute the solubility of Cu(OH)2 into the Ksp expression:

Ksp = (1.97 x 10^-7) x (2 x 1.97 x 10^-7)^2 = 1.2 x 10^-20

Therefore, the value of the solubility product constant, Ksp, for Cu(OH)2 at 30°C is 1.2 x 10^-20.

learn more about solubility here:

https://brainly.com/question/28170449

#SPJ11

In the following gas phase reaction, what is the effect on the direction of the reaction if more CO2 is added to the reaction mixture?2CO(g) + O2(g) ⇌ 2CO2(g)A) The position of the equilibrium remains unchanged.B) The equilibrium shifts to produce more products.C) The equilibrium shifts to produce more reactants.D) The rate of formation of products is increased.E) The catalyst for the reaction is used up.

Answers

In the given gas phase reaction, 2CO(g) + O2(g) ⇌ 2CO2(g), if more CO2 is added to the reaction mixture, it will affect the position of the equilibrium and the direction of the reaction.

According to Le Chatelier's principle, when a stress is applied to a system in equilibrium, the system will adjust to relieve that stress and restore equilibrium. In this case, the addition of more CO2 can be considered a stress to the equilibrium system.

To relieve the stress caused by the increase in CO2 concentration, the equilibrium will shift in the direction that consumes the excess CO2. In other words, the equilibrium will shift to produce more reactants (CO and O2) in order to reduce the concentration of CO2.

Therefore, the correct answer is :

C) The equilibrium shifts to produce more reactants.

Learn more about Le Chatelier's principle here : brainly.com/question/29009512

#SPJ11

Explain the ionic polarization mechanism as it pertains to a relaxor ferroelectric. a. The polyhedron experiences a cooperative Jahn-Teller tilting to accommodate phonon dispersion b. The central ion displaces within the polyhedron in response to an AC excitation C. Cross linking of polymer chains occurs by way of AC excitation thus enhancing polarization Wrinkled graphene is now considered for use as electrodes in a supercapacitor.

Answers

The ionic polarization mechanism in a relaxor ferroelectric involves the displacement of ions within the crystal lattice in response to an applied electric field. In a relaxor ferroelectric, the crystal structure is disordered and lacks long-range order, unlike a typical ferroelectric material that has a well-defined and ordered crystal structure.

Under the influence of an AC electric field, the ions in a relaxor ferroelectric experience a complex interplay of dipolar and ionic motions, which gives rise to a highly polarized state. This polarization arises due to the displacement of the ions within the polyhedron in response to the AC excitation. This displacement of ions creates a net dipole moment, leading to the formation of a ferroelectric domain.

The exact mechanism of the ionic polarization in relaxor ferroelectrics is still not completely understood, but it is believed to involve a combination of several factors, including the cooperative Jahn-Teller tilting of the polyhedron to accommodate phonon dispersion and the formation of polar nanoregions due to the fluctuations in the crystal structure.

In contrast to the traditional ferroelectric materials, the ionic polarization in a relaxor ferroelectric occurs over a range of temperatures and electric fields, resulting in a broad frequency response. This behavior makes relaxor ferroelectrics attractive for a range of applications, including ultrasonic transducers, capacitors, and piezoelectric devices.

Regarding the second part of the question, wrinkled graphene is being considered as a potential electrode material in a supercapacitor due to its high surface area and excellent electrical conductivity. Wrinkled graphene is a 3D version of graphene that has a corrugated surface, which allows for a larger surface area and higher capacitance than flat graphene electrodes.

The wrinkles and folds in the graphene sheet create a porous structure that enhances the accessibility of electrolyte ions to the electrode surface, leading to higher energy storage capacity. Additionally, the high electrical conductivity of graphene enables efficient charge transfer between the electrode and electrolyte, resulting in high power density and fast charging rates.

To know more about ionic polarization mechanism refer here

https://brainly.com/question/31328862#

#SPJ11

c) is there any evidence for exo- vs. endo- in the nmr? explain why/why not.

Answers

There is evidence for exo- vs. endo- in the NMR, as the chemical shift of a proton is affected by the position of substituents on a cyclohexane ring.


Exo- and endo- refer to the position of substituents on a cyclohexane ring. Exo- means that the substituent is on the outside of the ring, while endo- means that the substituent is on the inside of the ring. In NMR spectroscopy, the chemical shift is a measure of the magnetic environment around a particular nucleus.

When a substituent is in the exo- position, it is farther away from the other atoms in the ring. This means that it experiences a slightly different magnetic environment compared to an endo- substituent, which is closer to the other atoms in the ring. As a result, the chemical shift of an exo- substituent will be slightly different from that of an endo- substituent.

This difference in chemical shift can be used to identify the position of substituents on a cyclohexane ring. By comparing the chemical shifts of different protons in the NMR spectrum, it is possible to determine whether a substituent is in the exo- or endo- position.

To learn more about NMR spectroscopy visit:

brainly.com/question/31594990

#SPJ11

2.what are your experimental values for δh°, δs°, and δg° for these reactions? are they in agreement with the theoretical values? discuss any sources of experimental error.

Answers

By following all steps, you can analyze your experimental data values for δh°, δs°, and δg° and discuss any potential sources of error in your results.

The experimental values for ΔH°, ΔS°, and ΔG° for the reactions you are working on. Since you didn't provide the specific reactions, I cannot provide you with the actual values. However, I can guide you through the steps to obtain those values and compare them with theoretical values.
1. Determine the experimental values for ΔH°, ΔS°, and ΔG°:
  a. Measure the heat change (q) during the reaction using a calorimeter.
  b. Calculate the change in enthalpy (ΔH°) by dividing the heat change (q) by the moles of the limiting reactant.
  c. Determine the change in entropy (ΔS°) by analyzing the reaction's products and reactants in terms of their order and molecular complexity.
  d. Calculate the change in Gibbs free energy (ΔG°) using the formula ΔG° = ΔH° - TΔS°, where T is the temperature in Kelvin.
2. Compare the experimental values with theoretical values:
  a. Look up the standard enthalpies (ΔH°), entropies (ΔS°), and Gibbs free energies (ΔG°) for the reactions in literature or reference materials.
  b. Compare your experimental values with the theoretical values to determine if they are in agreement.
3. Discuss any sources of experimental error:
  a. Identify any possible sources of error in your experimental setup or procedure, such as measurement inaccuracies, heat loss, or impurities in the reactants.
  b. Discuss how these errors could have impacted your experimental values and whether they could account for any discrepancies between your experimental and theoretical values.
By following these steps, you can analyze your experimental data and discuss any potential sources of error in your results.

For more such questions on experimental data , Visit:

https://brainly.com/question/1403648

#SPJ11

Other Questions
1. ) A box is full of blue pens and green pens. There are 64 total pens in the box and 52 redpens. Answer the following rounded to 4 decimal places mno4(aq) ch3oh(aq)mn2 (aq) hco2h(aq) (acidicsolution) express your answer as a chemical equation. identify all of the phases in your answer. according to the textbook, what is the most important provision of the u.s. constitution with respect to civil rights? What is the flexibility of spider silk determined by the structure of its molecules Evaluate the indefinite integral. (Use C for the constant of integration.) et 3 + ex dx len 2(3+ex)(:)+c * Need Help? Read It Watch It Master It [0/1 Points] DETAILS PREVIOUS ANSWERS SCALCET8 5.5.028. Evaluate the indefinite integral. (Use C for the constant of integration.) ecos(5t) sin(5t) dt cos(5t) +CX Need Help? Read It [-/1 Points] DETAILS SCALCET8 5.5.034.MI. Evaluate the indefinite integral. (Use C for the constant of integration.) cos(/x) dx 78 why is the concept of pathologizing the human body problematic? At the end of 1999 there were more than 58,000 patients awaiting transplants of a variety of organs such as livers, hearts, and kidneys. A national organ donor organization is trying to estimate the proportion of all people who would be willing to donate their organs after their death to help transplant recipients. Which one of the following would be the most appropriate sample size required to ensure a margin of error of at most 3 percent for a 98% confidence interval estimate of the proportion of all people who would be willing to donate their organs? (A) 175 (B) 191 (C) 1510 (D) 1740 (E) 1845 B D The control system in which a controller produces only a 0%-100% output signal is called Determine the [OH-], pH, and pOH of a 0.15 M ammonia solution. Which of the following factors may deplete a woman's nutrient stores?numerous previous pregnanciespreterm birthspregnancies after age 35pregnancies more than 3 years apart FILL IN THE BLANK.one study reported in the text demonstrates that people are more inclined to like others who they perceive as ________ and less inclined to like people who they perceive as ________. clump of clay mj = 0.49 kg is thrown in the x direction with an initial velocity of v 27 m/s. It strikes a crate of m2 2.3 kg initially at rest and sticks. 33% Part (a) Write an expression for the system's final velocity vf. 33% Part (b) Assume the crate had an initial velocity of vb in the positive x direction. Write an expression for the final velocity of the system 33% Part (c) If the crate has an initial velocity of vh 2.5 m/s, what is the final velocity of the system in meters per second? b Grade Summary Deductions 0% Potential 100% Calculate the total kilocalories if the cup of yogurt contains 12 g of carbohydrate, 4 g of fat, and 7 g of protein. a very long cylinder of radius a and made of material with permeability m is placed into an initially uniform magnetic field Write a scheme function (tribonacci n). The tribonacci numbers Ti are defined as T0 = T1 = 0, T2 = 1, and TN = TN-1 + TN-2 + TN-3. (tribonacci n) should return Tn. tribonacci and any helper functions must be tail recursive. FILL IN THE BLANK. Two kids sit on a seesaw of length 4.2m, balanced at its center. Sarah sits at the far end and has a mass of 55.kg. Anna is 75kg. They seesaw for a while (having a grand time) hen decide to balance themselves. Anna is sitting ________________ from the center. Then Sarah is given a bag of oranges weighing 3.0kg, and the seesaw rotates out of balance. When Anna is given a bag of apples, balance is still not restored. She needs to place the apples 0.25m behind her for them to be balanced again. What is the mass of the bag of apples? Five boys and 4 girls want to sit on a bench. how many ways can they sit on the bench? As a jewelry store manager, you want to offer credit, with interest on outstanding balances paid monthly. To carry receivables, you must borrow funds from your bank at a nominal 7%, monthly compounding. To offset your overhead, you want to charge your customers an EAR (or EFF%) that is 4% more than the bank is charging you. What APR rate should you charge your customers the best way to distinguish an epigenetic effect from other types of gene regulation would be to___ an implication of part i of the coase theorem is that in the presence of externalities, government: