What is X?
in decimal form plz

What Is X?in Decimal Form Plz

Answers

Answer 1
X should theoretically = 8.8 if you do the Pythagorean theorem.
6^2 + 4.2^2 = x^2
x = 7.3
Then go to the next triangle to find the missing length:
7.3^2 + 5^2 = x^
x = 8.8

Related Questions

You and your pen pal record the weather in your respective countries on weekend days over the summer. Complete parts a through b

Answers

We recorded the temperature in degrees Celsius and Fahrenheit, the precipitation (if any), and the overall weather conditions (sunny, cloudy, rainy, etc.).b) By comparing the weather in our respective countries over the summer, we were able to note any similarities or differences in our climates and weather patterns.

As per the given scenario, you and your pen pal record the weather in your respective countries on weekend days over the summer. There are a couple of details you need to record in order to get accurate information regarding the weather. These are as follows:Temperature: It is one of the most essential factors of weather and measured in degrees Celsius or Fahrenheit.Precipitation: It refers to the amount of water that falls from the sky in the form of rain, hail, sleet, or snow. The amount of precipitation varies on a daily basis.Overall Weather Conditions: It refers to the condition of the weather. For example, it can be sunny, cloudy, rainy, or any other conditions.You must record these factors in both Celsius and Fahrenheit since both countries have different measuring systems. To analyze the weather patterns of both countries, you need to compare the data and note any similarities or differences.

To know more about precipitation, visit:

https://brainly.com/question/18109776

#SPJ11

Given f(x) = -x² - 7x, find f(-10)

Answers

Answer:

- 30

Step-by-step explanation:

Given

f (x) = - x² - 7x

To find : f (- 10)

- x²

= - (- 10)²

= - [ (- 10)×(- 10) ]

= - [ 100 ]

= - 100

- 7x

= - 7 × - 10

= 70

f (- 10) = - 100 + 70

f (- 10) = - 30

27. A particle moves along a coordinate line so that x, its distance from the origin at time t, 0 is given by: x(t) = cos' t. The first time interval in which the point is moving to the right is (A) 0

Answers

The answer is (C) (π/2, 3π/2).

Where is the particle moving?

The particle is moving to the right when its velocity is positive.

The velocity of the particle is given by:

x'(t) = -sin(t)

The particle is moving to the right on the time intervals where x'(t) > 0.

x'(t) > 0 when -sin(t) > 0, which means sin(t) < 0.

The sine function is negative in the second and third quadrants.

So the first time interval in which the particle is moving to the right is (π/2, 3π/2).

Therefore, the answer is (C) (π/2, 3π/2).

Learn more about velocity

brainly.com/question/17127206

#SPJ11

I need to know the probability that someone would not prefer dogs using this vin diagram

Answers

The probability that someone would not prefer dogs is 0.345.

What is the probability that someone would not prefer dogs?

The probability that someone would not prefer dogs is determined using the formula below:

Probability = {(cat alone) + (neither car nor dog)}/total number of people

those who prefer cats alone (cat alone) = 100

those who prefer neither cats nor dogs (neither car nor dog) = 17

total number of people = 87 + 52 + 100 + 17

total number of people = 256

Probability = 117 / 256 = 0.345

Therefore, the probability that someone would not prefer dogs is 0.345.

Learn more about probability at: https://brainly.com/question/24756209

#SPJ1

Solve the given initial-value problem. X' = 13 11 16 0 4 0 X, 1 1 3 X(O) = 5 X(t) = X(t) =

Answers

To solve the given initial-value problem, we need to use matrix calculus. We have the following system of differential equations: Therefore, the solution to the initial-value problem is: X(t) = (9/5) e^(16t) [2; 0; 1] + (7/2) e^(2t) [1; 0; -1] + (3/2) e^(2t) [0; 1; 1]


X' = [13 11 16; 0 4 0; 1 1 3] X

Where X is a 3x1 matrix and X' is its derivative. We are also given the initial condition X(0) = [5; 1; 2].

To solve this system, we need to find the eigenvalues and eigenvectors of the coefficient matrix [13 11 16; 0 4 0; 1 1 3]. The eigenvalues are λ1 = 16, λ2 = 2, and λ3 = 2, with corresponding eigenvectors v1 = [2; 0; 1], v2 = [1; 0; -1], and v3 = [0; 1; 1].

We can then write the general solution as:

X(t) = c1 e^(16t) [2; 0; 1] + c2 e^(2t) [1; 0; -1] + c3 e^(2t) [0; 1; 1]

Using the initial condition X(0) = [5; 1; 2], we can solve for the constants c1, c2, and c3. We get:

c1 = 1/5 [2; 0; 1] . [5; 1; 2] = 9/5
c2 = 1/2 [1; 0; -1] . [5; 1; 2] = 7/2
c3 = 1/2 [0; 1; 1] . [5; 1; 2] = 3/2

Therefore, the solution to the initial-value problem is:

X(t) = (9/5) e^(16t) [2; 0; 1] + (7/2) e^(2t) [1; 0; -1] + (3/2) e^(2t) [0; 1; 1]

To know more about Calculus visit :
https://brainly.com/question/31801938

#SPJ11

Use the properties of the definite integral
Question
If ∫51f(x)dx=3615, what is the value of ∫15f(x)dx?

Answers

The value of given definite integral [tex]\int\limits^5_1 {f(x)} \, dx[/tex] is 3615.

In calculus, the definite integral is a mathematical concept used to calculate the area under a curve between two points on the x-axis. The properties of definite integrals allow us to make certain calculations and transformations to integrals to simplify their evaluation.

In this problem, we are given the definite integral of f(x) between 5 and 1 and asked to find the definite integral of f(x) between 1 and 5.

We are given that [tex]\int\limits^1_5 {f(x)} \, dx[/tex] = 3615, which represents the area under the curve of f(x) between the limits of 5 and 1 on the x-axis. We are asked to find the area under the same curve between the limits of 1 and 5 on the x-axis, which is represented by the definite integral [tex]\int\limits^5_1 {f(x)} \, dx[/tex].

One of the properties of definite integrals is that if we reverse the limits of integration, the sign of the integral changes. Therefore, we can write:

[tex]\int\limits^5_1 {f(x)} \, dx[/tex] = [tex]-\int\limits^1_5 {f(x)} \, dx[/tex]

We already know that [tex]\int\limits^1_5 {f(x)} \, dx[/tex] = 3615, so we can substitute this value into the above equation:

[tex]\int\limits^5_1 {f(x)} \, dx[/tex] = -3615

However, this is not the final answer because the question asks for the value of [tex]\int\limits^5_1 {f(x)} \, dx[/tex], not [tex]-\int\limits^1_5 {f(x)} \, dx[/tex]. To obtain the actual value, we need to multiply the above result by -1:

[tex]\int\limits^5_1 {f(x)} \, dx[/tex] = 3615

Therefore, the value of [tex]\int\limits^5_1 {f(x)} \, dx[/tex] is 3615.

To know more about Integration

https://brainly.com/question/18125359

#SPJ4

Complete Question

Use the properties of the definite integral

Question :

If  [tex]\int\limits^1_5 {f(x)} \, dx[/tex] = 3615, what is the value of [tex]\int\limits^5_1 {f(x)} \, dx[/tex] ?

find the values of p for which the series is convergent. [infinity] 9 n(ln(n)) p n = 2 p -?-

Answers

The series converges for p > 1/2.

To determine the convergence of the series, we can use the integral test. The integral test states that if the function f(n) is positive, continuous, and decreasing for n ≥ N, and if the series Σ f(n) converges, then the series Σ a(n) also converges, where a(n) = f(n) for all n.

In this case, we have a(n) = 9n(ln(n))^p. To check the convergence, we will consider the function f(n) = 9n(ln(n))^p and evaluate the integral of f(n) from N to infinity, where N is a positive integer.

∫[N,∞] 9n(ln(n))^p dn = 9∫[N,∞] n^(1+p)ln(n)^p dn

Using integration by parts with u = ln(n)^p and dv = n^(1+p) dn, we get du = p(ln(n))^(p-1)/n dn and v = n^(2+p)/(2+p).

Applying the integration by parts formula, the integral becomes:

9[(ln(n))^p * n^(2+p)/(2+p) - p/(2+p) ∫[N,∞] (ln(n))^(p-1) n^(2+p)/(n) dn]

Simplifying further, we have:

9[(ln(n))^p * n^(2+p)/(2+p) - p/(2+p) ∫[N,∞] (ln(n))^(p-1) n^(1+p) dn]

Since ln(n) is positive for n > 1, we can drop the absolute value signs.

The term p/(2+p) ∫[N,∞] (ln(n))^(p-1) n^(1+p) dn will be finite for p > 1/2. This is because (ln(n))^(p-1) approaches 0 as n approaches infinity, and n^(1+p) is a convergent power series for p > -1.

Therefore, the integral ∫[N,∞] 9n(ln(n))^p dn converges if p > 1/2. Consequently, the series Σ 9n(ln(n))^p converges for p > 1/2.

For more questions like Series click the link below:

https://brainly.com/question/28167344

#SPJ11

the base of a solid s is an elliptical region with boundary curve 49x2 4y2 = 196. cross-sections perpendicular to the x-axis are isosceles right triangles with hypotenuse in the base.

Answers

The base of a solid s is given by the equation 49x² + 4y² = 196, which represents an elliptical region in the xy-plane. Cross-sections of the solid perpendicular to the x-axis are isosceles right triangles, meaning that they have two sides of equal length and a right angle.

To visualize this, imagine slicing the solid s with a plane perpendicular to the x-axis. This plane intersects the elliptical base and forms a triangle that is right-angled at the point where the plane meets the base. Since the cross-section is isosceles, the other two sides of the triangle must be of equal length. Therefore, the hypotenuse of the triangle must lie on the boundary curve 49x² + 4y² = 196.

As we move the slicing plane along the x-axis, the hypotenuse of each cross-section remains on the elliptical boundary curve, and the legs of the triangle get shorter or longer depending on the distance of the plane from the origin. Thus, the solid s has a varying height and a changing shape along the x-axis.

In summary, the solid s is formed by stacking isosceles right triangles with a common hypotenuse lying on the boundary curve of the elliptical base. The resulting shape of the solid changes along the x-axis and can be visualized by slicing it perpendicular to the x-axis.

To know more about elliptical region, refer to the link below:

https://brainly.com/question/31585393#

#SPJ11

A study involving stress is done on a college campus among the students. The stress scores follow a uniform distribution with the lowest stress score equal to 1 and the highest equal to 5. Using a sample of 75 students, find: a. The probability that the mean stress score for the 75 students is less than 2. b. The probability that the total of the 75 stress scores is less than 200. c. The 90th percentile for the total stress score for the 75 students. d. The probability that a student with stress scores is less than

Answers

a. The probability that the mean stress score for the 75 students is less than 2 is 0.

b. The probability that the total of the 75 stress scores is less than 200 is approximately 0.

c. The 90th percentile for the total stress score for the 75 students is approximately 232.4.

d. The probability that a student with stress score less than 5 is is 1.

a. The mean stress score for a sample of 75 students can be modeled by a normal distribution with a mean of 3 and a standard deviation of σ/√n, where σ is the standard deviation of the uniform distribution and n is the sample size. Since the lowest stress score is 1 and the highest is 5, the standard deviation is (5-1)/√12 = 2/√3. Thus, the mean stress score for a sample of 75 students is normally distributed with a mean of 3 and a standard deviation of 2/√225 = 2/15.

Using the z-score formula, we have:

z = (2 - 3)/(2/15) = -15/2

P(mean stress score < 2) = P(z < -15/2) = 0 (since the probability of a z-score less than -4 or greater than 4 is very close to 0)

Therefore, the probability that the mean stress score for the 75 students is less than 2 is 0.

b. The total stress score for the 75 students can be modeled by a normal distribution with a mean of 3 * 75 = 225 and a standard deviation of √(75/12) * (5-1) = √25 = 5.

Using the z-score formula, we have:

z = (200 - 225)/5 = -5

P(total stress score < 200) = P(z < -5) ≈ 0

Therefore, the probability that the total of the 75 stress scores is less than 200 is approximately 0.

c. The 90th percentile for the total stress score for the 75 students corresponds to the value for which 90% of the total stress scores are less than or equal to that value.

Using a standard normal distribution table, we find that the z-score corresponding to the 90th percentile is approximately 1.28.

Thus, the total stress score corresponding to the 90th percentile is:

X = 225 + 1.28 * 5 ≈ 232.4

Therefore, the 90th percentile for the total stress score for the 75 students is approximately 232.4.

d. Since the stress scores follow a uniform distribution, the probability that a student with stress scores is less than a certain value x is given by (x-1)/(5-1) = (x-1)/4.

Therefore, the probability that a student with stress scores is less than x is:

P(stress score < x) = (x-1)/4

For example, the probability that a student with stress score less than 3 is:

P(stress score < 3) = (3-1)/4 = 0.5

Similarly, the probability that a student with stress score less than 4 is:

P(stress score < 4) = (4-1)/4 = 0.75

And the probability that a student with stress score less than 5 is:

P(stress score < 5) = (5-1)/4 = 1

Note that these probabilities are only for individual students, and do not necessarily apply to the mean or total stress scores for a sample of students.

Learn more about "probability ":

https://brainly.com/question/13604758

#SPJ11

Determine which of the four levels of measurement (nominal, ordinal, interval ratio) is most appropriate Ages of survey respondents. A. Ordinal B. Interval C. Ratio D. Nominal

Answers

The most appropriate level of measurement for the Ages of survey respondents would be the interval ratio.

This is because age is a quantitative variable that can be measured on a continuous scale with equal intervals between each value. The nominal level of measurement is used for categorical variables with no inherent order, the ordinal level of measurement is used for variables with a specific order, but the differences between values are not meaningful, and the ratio level of measurement is used for variables with a true zero point and meaningful ratios between values.

Since age can be measured on a continuous scale with a meaningful zero point (birth), the interval ratio is the most appropriate level of measurement. Hence, the answer is B) Interval

Learn more about quantitative variable: https://brainly.com/question/14037311

#SPJ11

determine whether the series is absolutely convergent, conditionally convergent, or divergent. [infinity] sin(8n) 6n n = 1

Answers

The series is absolutely convergent.

To determine if the series is absolutely convergent, conditionally convergent, or divergent, we first analyze the absolute value of the series. We consider the series Σ|sin(8n)/6n| from n=1 to infinity. Using the comparison test

since |sin(8n)| ≤ 1, the series is bounded by Σ|1/6n| which is a convergent p-series with p>1 (p=2 in this case).

Since the series Σ|sin(8n)/6n| converges, the original series Σsin(8n)/6n is absolutely convergent. Absolute convergence implies convergence,

To learn more about : series

https://brainly.com/question/24644930

#SPJ11

The series sin(8n)/(6n) is divergent (by comparison with the harmonic series), the original series is not convergent.

To determine the convergence of the given series, we need to analyze it using the given terms. The series is:

Σ(sin(8n) / 6n) from n = 1 to infinity.

First, let's check for absolute convergence by taking the absolute value of the series terms: Lim m as n approaches infinity of |(sin(8(n+1))/(6(n+1))) / (sin(8n)/(6n))|

= lim as n approaches infinity of |(sin(8(n+1))/(6(n+1))) * (6n/sin(8n))|

= lim as n approaches infinity of |sin(8(n+1))/sin(8n)|
Σ|sin(8n) / 6n| from n = 1 to infinity.

Since |sin(8n)| is bounded between 0 and 1, we have:

Σ|sin(8n) / 6n| ≤ Σ(1 / 6n) from n = 1 to infinity.

Now, the series Σ(1 / 6n) is a geometric series with a common ratio of 1/6, which is less than 1. Therefore, this geometric series is convergent. By the comparison test, since the original series has terms that are less than or equal to the terms in a convergent series, the original series must be convergent.

In summary, the given series Σ(sin(8n) / 6n) from n = 1 to infinity is convergent.

Learn more about the series:

brainly.com/question/15415793

#SPJ11

when a function is invoked with a list argument, the references of the list is passed to the functiontrue/false

Answers

The answer is true. When a function is invoked with a list argument in Python, the reference to the list is passed to the function.

Is it true that when a list is passed as an argument to a function its reference is passed to the function?

This means that any changes made to the list within the function will affect the original list outside of the function as well.

Here's an example to illustrate this behavior:

def add_element(lst, element):

   lst.append(element)

my_list = [1, 2, 3]

add_element(my_list, 4)

print(my_list)  # Output: [1, 2, 3, 4]

In this example, the add_element function takes a list (lst) and an element (element) as arguments and appends the element to the end of the list.

When the function is called with my_list as the first argument, the reference to my_list is passed to the function.

Therefore, when the function modifies lst by appending element to it, the original my_list list is also modified. The output of the program confirms that the original list has been changed.

It's important to keep this behavior in mind when working with functions that take list arguments, as unexpected modifications to the original list can lead to bugs and errors in your code.

Learn more about function

brainly.com/question/12431044

#SPJ11

David has a credit card with an APR of 13. 59% and a 30-day billing cycle. The table below details David’s transactions with that credit card in the month of November. Date Amount ($) Transaction 11/1 1,998. 11 Beginning balance 11/5 43. 86 Purchase 11/16 225. 00 Payment 11/23 61. 21 Purchase Between the previous balance method and the daily balance method, which method of calculating David’s November finance charge will result in a greater finance charge, and how much greater will it be? a. The daily balance method will have a finance charge $1. 59 greater than the previous balance method. B. The daily balance method will have a finance charge $0. 40 greater than the previous balance method. C. The previous balance method will have a finance charge $0. 96 greater than the daily balance method. D. The previous balance method will have a finance charge $2. 55 greater than the daily balance method.

Answers

The previous balance method will have a finance charge of $2.55 greater than the daily balance method.

Here, we have

Given:

Between the previous balance method and the daily balance method, the previous balance method will have a finance charge of $2.55 greater than the daily balance method.

The difference between the two methods lies in the way in which interest is calculated. In the previous balance method, finance charges are based on the beginning balance of the month; on the other hand, in the daily balance method, interest is based on the average daily balance of the month.

The formula used to calculate the daily balance method is:

Average Daily Balance (ADB) = (Total of all balances during billing period ÷ Number of days in billing period)

So, the first step is to compute David's average daily balance using the formula mentioned above:

ADB = ((1,998.11 x 30) + (43.86 x 21) + (225 x 7) + (61.21 x 2)) ÷ 30 = $1,153.03

The finance charge using the daily balance method would be:($1,153.03 x 13.59% ÷ 365) x 30 = $5.41

The previous balance method charges interest based on the initial amount. As a result, the finance charge is equal to the balance at the end of the billing period multiplied by the APR divided by 12.

The finance charge using the previous balance method would be:($152.65 x 13.59% ÷ 12) = $1.71

Therefore, the previous balance method will have a finance charge of $2.55 greater than the daily balance method.

The previous balance method will have a finance charge of $2.55 greater than the daily balance method.

To learn about the balance method here:

https://brainly.com/question/29744405

#SPJ11

Consider the following competing hypotheses:
H0: rhoxy = 0 HA: rhoxy ≠ 0
The sample consists of 18 observations and the sample correlation coefficient is 0.15. [You may find it useful to reference the t table.]
a-1. Calculate the value of the test statistic. (Round intermediate calculations to at least 4 decimal places and final answer to 3 decimal places.)
a-2. Find the p-value.
0.05 p-value < 0.10
0.02 p-value < 0.05
0.01 p-value < 0.02
p-value < 0.01
p-value 0.10
b. At the 10% significance level, what is the conclusion to the test?
Reject H0; we can state the variables are correlated.
Reject H0; we cannot state the variables are correlated.
Do not reject H0; we can state the variables are correlated.
Do not reject H0; we cannot state the variables are correlated.

Answers

a)  The correct answer is: p-value 0.10.

b)  The conclusion to the test is: Do not reject H0; we cannot state the variables are correlated.

a-1. The test statistic for testing the correlation coefficient is given by:

t = r * sqrt(n-2) / sqrt(1-r^2)

where r is the sample correlation coefficient and n is the sample size.

Substituting the given values, we get:

t = 0.15 * sqrt(18-2) / sqrt(1-0.15^2) ≈ 1.562

Rounding to 3 decimal places, the test statistic is 1.562.

a-2. The p-value is the probability of observing a test statistic as extreme or more extreme than the one calculated, assuming that the null hypothesis is true. Since this is a two-tailed test, we need to find the probability of observing a t-value as extreme or more extreme than 1.562 or -1.562. Using a t-table with 16 degrees of freedom (n-2=18-2=16) and a significance level of 0.05, we find the critical values to be ±2.120.

The p-value is the area under the t-distribution curve to the right of 1.562 (or to the left of -1.562), multiplied by 2 to account for the two tails. From the t-table, we find that the area to the right of 1.562 (or to the left of -1.562) is between 0.10 and 0.20. Multiplying by 2, we get the p-value to be between 0.20 and 0.40.

Therefore, the correct answer is: p-value 0.10.

b. At the 10% significance level, we compare the p-value to the significance level. Since the p-value is greater than the significance level of 0.10, we fail to reject the null hypothesis. Therefore, the conclusion to the test is: Do not reject H0; we cannot state the variables are correlated.

Learn more about p-value here:

https://brainly.com/question/30461126

#SPJ11

If f(x)=3x+2 and g(x)=x^2+1 which expression is equivalent to (f.g)(x)?

Answers

If f(x) = 3x + 2 and g(x) = x² + 1, we need to find out which of the expressions is equal to (f.g)(x). Solution: To solve the given problem, we need to use the formula of composition of two functions:f.g(x) = f[g(x)] = 3[x² + 1] + 2f.g(x) = 3x² + 3 + 2f.g(x) = 3x² + 5

Therefore, the expression 3x² + 5 is equivalent to (f.g)(x).That is, (f.g)(x) = 3x² + 5In the above solution, we have used the formula of composition of two functions, which is given below:If f(x) and g(x) are two functions, then the composition of two functions f(x) and g(x) is defined as

f[g(x)].If f(x) = 3x + 2 and g(x) = x² + 1, then (f.g)(x) = f[g(x)] = 3[x² + 1] + 2 = 3x² + 3 + 2 = 3x² + 5, which means the expression 3x² + 5 is equivalent to (f.g)(x).The explanation of the solution is written in more than 100 words.

To know more about formula visit:

https://brainly.com/question/20748250

#SPJ11

use the power series method to determine the general solution to the equation. (1 − x 2 )y ′′ − xy′ 4y = 0.

Answers

The values of the coefficients is y = 1 - x^2/3 + x^4/30 - x^6/630 + ... and this is the general solution to the differential equation.

To use the power series method to determine the general solution to the equation (1-x^2)y'' - xy' + 4y = 0, we assume that the solution y can be written as a power series:

y = a0 + a1x + a2x^2 + ...

Then, we differentiate y to obtain:

y' = a1 + 2a2x + 3a3x^2 + ...

And differentiate again to get:

y'' = 2a2 + 6a3x + 12a4x^2 + ...

Substituting these expressions into the original equation and collecting terms with the same powers of x, we get:

[(2)(-1)a0 + 4a2] + [(6)(-1)a1 + 12a3]x + [(12)(-1)a2 + 20a4]x^2 + ... - x[a1 + 4a0 + 16a2 + ...] = 0

Since this equation must hold for all x, we equate the coefficients of each power of x to zero:

(2)(-1)a0 + 4a2 = 0

(6)(-1)a1 + 12a3 - a1 - 4a0 = 0

(12)(-1)a2 + 20a4 + 4a2 - 16a0 = 0

...

Solving these equations recursively, we can obtain the coefficients a0, a1, a2, a3, a4, ... and hence obtain the power series solution y.

In this case, we can simplify the recursive equations by using the fact that a1 = (4a0)/(1!), a2 = (6a1 - 12a3)/(2!), a3 = (6a2 - 20a4)/(3!), and so on. Substituting these expressions into the equation for a0 and simplifying, we get:

a0 = 1

Using this as the starting point, we can compute the other coefficients recursively:

a1 = 0

a2 = -1/3

a3 = 0

a4 = 1/30

a5 = 0

a6 = -1/630

...

Thus, the power series solution to the equation (1-x^2)y'' - xy' + 4y = 0 is:

y = a0 + a1x + a2x^2 + a3x^3 + a4x^4 + a5x^5 + a6x^6 + ...

Substituting the values of the coefficients, we obtain:

y = 1 - x^2/3 + x^4/30 - x^6/630 + ...

This is the general solution to the differential equation.

Learn more about coefficients here

https://brainly.com/question/1038771

#SPJ11

Select the correct answer from each drop-down menu.


A jewelry artisan has determined that her revenue, y, each day at a craft fair is at most -0. 532 + 30. 5, where x represents the number


of necklaces she sells during the day. To make a profit


, her revenue must be greater than her costs, 25 + 150.


Write a system of inequalities to represent the values of x and y where the artisan makes a profit. Then complete the statements.


The point (30,230) is


The point (10,300) is


of this system


of this system


Submit


Reset

Answers

To make a profit, a jewelry artisan's revenue, y, must be greater than her costs, which are $25 + $150. Her revenue is at most -0.532x + 30.5, where x is the number of necklaces she sells each day.

Therefore, the system of inequalities to represent the values of x and y where the artisan makes a profit is:[tex]y > 25 + 150y > 175x(30, 230)[/tex]is a solution of this system because the revenue is greater than the cost: [tex]y = 230 > 25 + 150 = 175, and x = 30.(10, 300)[/tex]is not a solution of this system because the revenue is less than the cost: [tex]y = 300 < 25 + 150 = 175,[/tex]which is not greater than the cost and therefore does not make a profit.

To know more about the word revenue visits :

https://brainly.com/question/26718146

#SPJ11

Drag and drop the answer into the box to match each multiplication problem. 0.38 × 10³ 0.38 × 100,000 0.38 × 10 The option "380" (3 of 5) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape.

Answers

Option A corresponds to the product 3800, Option B corresponds to the product 38,000, and Option C corresponds to the product 3.8. Start with the correct answer:

Option A: 3800

Option B: 38,000

Option C: 3.8

The given multiplication problems are:

[tex]0.38 × 10³[/tex]

[tex]0.38 × 100,000[/tex]

[tex]0.38 × 10[/tex]

The answer to the given multiplication problems are:

0.38 × 10³ = 3800[tex]0.38 × 10³ = 3800[/tex]

[tex]0.38 × 100,000 = 38,000[/tex]

[tex]0.38 × 10 = 3.8[/tex]

Therefore, the answer is:

Option A: 3800

Option B: 38,000

Option C: 3.8

In conclusion, the correct answers to the given multiplication problems are as follows: The product of 0.38 multiplied by 10³ is 380. When 0.38 is multiplied by 100,000, the result is 38,000. Lastly, when 0.38 is multiplied by 10, the answer is 3.8.

To know more about multiplication, Visit :

https://brainly.com/question/11527721

#SPJ11

Let a, b, and c be distinct points. If Pr({a, b}) = Pr({a, c}) = Pr({b, c}) and Pr({a, b, c}) = 1 what is Pr({a})
1/6
1/3
1/2
2/3
It cannot be determined from the information given.

Answers

If Probability of ({a, b}) = Pr({a, c}) = Pr({b, c}) and Pr({a, b, c}) = 1 .

Pr({a}) = 1/3

What is probability?

The  probability of an event is described as  a number that indicates how likely the event is to occur which  is expressed as a number in the range from 0 and 1, or, using percentage notation, in the range from 0% to 100%.

a, b, and c are different and we have that

Pr({a, b}) = Pr({a, c}) = Pr({b, c}) = 1/3,

Pr({a, b, c}) = 1.

We now Substitute these values and get the following:

Pr({a}) = 1 - 2Pr({a, b}) - 2Pr({a, c}) + 2Pr({a, b, c})

Pr({a} = 1 - 2/3 - 2/3 + 2 = 1/3

Let more about probability at: https://brainly.com/question/24756209

#SPJ1

Douglas is saving up money for a down payment on a condominium. He currently has $2880 , but knows he can get a loan at a lower interest rate if he can put down $3774. If he invests the $2880 in an account that earns 5. 7% annually, compounded quarterly, how long will it take Douglas to accumulate the $3774 ? Round your answer to two decimal places, if necessary

Answers

Douglas will need approximately 13.12 quarters, or approximately 3 years and 4 months to accumulate $3774, with two decimal places.

To solve this problem

We can apply the compound interest formula:

A = P(1 + r/n)^(nt)

Where

A is the sum P is the principalr is the yearly interest raten is the frequency of compounding (quarterly means n = 4) t is the length of time in years

Douglas presently has $2880, thus in order to reach his goal of $3774, he must earn the following amount in interest:

$3774 - $2880 = $894

We can set up the equation as follows:

$2880(1 + 0.057/4)^(4t) = $3774

Simplifying the left side, we get:

$2880(1.01425)^(4t) = $3774

Dividing both sides by $2880, we get:

(1.01425)^(4t) = 1.31042

Taking the natural logarithm of both sides, we get:

4t * ln(1.01425) = ln(1.31042)

Dividing both sides by 4 ln(1.01425), we get:

t = ln(1.31042) / (4 ln(1.01425)) = 13.12 quarters

Therefore, Given that there are 4 quarters in a year, Douglas will need approximately 13.12 quarters, or approximately 3 years and 4 months, to accumulate $3774, with two decimal places.

Learn more about compound interest here : brainly.com/question/28960137

#SPJ1

It will take Douglas approximately 3.02 years to accumulate $3,774 by investing his initial $2,880 in an account that earns 5.7% annually, compounded quarterly.

We use the formula for compound interest to estimate how long it will take Douglas to accumulate the needed amount.

What is the formula for compound interest?

The compound interest formula we shall to solve the problem is:

A = P(1 + r/n)[tex]^(nt)[/tex]

where:

A = amount of money after t years

P = principal amount (or initial investment)

r = annual interest rate (as a decimal)

n = number of compound interest per year

t = number of years

Filling in the values:

P = $2880

r = 0.057 (5.7% as a decimal)

n = 4 (compounded quarterly)

A = $3774

$3774 = $2880 (1 + 0.057/4)[tex]^(4t)[/tex]

Simplifying the equation, we get:

1.308125 = (1.01425)[tex]^(4t)[/tex]

We take the natural log from both sides:

ln(1.308125) = ln((1.01425)[tex]^(4t)[/tex]

Using the logarithm, we can simplify the right-hand side:

ln(1.308125) = 4t * ln(1.01425)

Now we can solve for t by dividing both sides by 4ln(1.01425):

t = ln(1.308125) / (4 * ln(1.01425))

t ≈ 3.02

Therefore, it will take approximately 3.02 years, for Douglas to accumulate $3,774.

Learn more about compound interest at brainly.com/question/28020457

#SPJ1

Kitchenaid will discontinue the bisque color for its dishwashers due to reports suggesting it is not popular west of the Mississippi unless more than 30% of its customers in states east of the Mississippi prefer it to make up for lost sales elsewhere). As part of the decision process, a random sample of 500 customers east of the Mississippi is selected and their preferences are recorded. of the 500 interviewed, 185 said they prefer the bisque color. a. (3 pts) Define the parameter of interest in words and notation.

Answers

The parameter of interest in words and notation is the proportion of Kitchen aid dishwasher customers east of the Mississippi who prefer the bisque color (p).

The parameter of interest in word and notation is the proportion of Kitchen aid dishwasher customers east of the Mississippi who prefer the bisque color. It can be denoted as p. The null hypothesis is that the proportion of customers east of the Mississippi who prefer the bisque color is less than or equal to 0.3, i.e., p ≤ 0.3. The alternative hypothesis is that the proportion of customers east of the Mississippi who prefer the bisque color is greater than 0.3, i.e., p > 0.3. This is based on the condition that if less than 30% of customers east of the Mississippi prefer the bisque color, then the color will be discontinued unless more than 30% of its customers in states east of the Mississippi prefer it to make up for lost sales elsewhere.

To know more about parameter click here :

https://brainly.com/question/17074118

#SPJ4

located in the middle of the field has a circumference of 16π yards. A diagram of the soccer field is shown below. What is the area, in square yards, of the portion of the field that is outside of the circular area?

Answers

The portion of the field that is outside of the circular area is 9,398.4 yd².

What is the area of the circular portion?

The radius of the circle is calculated as follows;

circumference of the circle = 16π yards

circumference = 2πr

where;

r is the radius of the circle

2πr = 16π

r = 8 yards

The area of the circular portion is calculated as follows;

A = πr²

A = π x (8 yd)²

A = 201.6 yd²

The total area of the field is calculated as follows;

A = 120 yds  x  80 yds

A = 9,600 yd²

The portion of the field that is outside of the circular area is calculated as follows;

= 9,600 yd² - 201.6 yd²

= 9,398.4 yd²

Learn more about area of field here: https://brainly.com/question/16655158

#SPJ1

Which element of a test of a hypothesis is used to decide whether to reject the null hypothesis in favor of the alternative hypothesis? A. Test statistic B. Conclusion C. Rejection region D. Level of significance

Answers

The element of a test of a hypothesis that is used to decide whether to reject the null hypothesis in favor of the alternative hypothesis is the test statistic. The test statistic is a numerical value that is calculated from the sample data and is used to compare against a critical value or rejection region to determine if the null hypothesis should be rejected. The level of significance is also important in determining the critical value or rejection region, but it is not the actual element used to make the decision to reject or fail to reject the null hypothesis.

About Hypothesis

The hypothesis or basic assumption is a temporary answer to a problem that is still presumptive because it still has to be proven true. The alleged answer is a temporary truth, which will be verified by data collected through research. Statistics is a science that studies how to plan, collect, analyze, then interpret, and finally present data. In short, statistics is the science concerned with data. The term statistics is different from statistics. A numeric value contains only numbers, a sign (leading or trailing), and a single decimal point.

Learn more about hypothesis at https://brainly.com/question/606806

#SPJ11

In a class 50 students, three-fifths are girls. Each girl brings a ribbon of length 2 three-fourths metre and each boy brings 3 one-fourths metre. What is the total length of ribbon collected by all 50 students?

Answers

Answer:

total ribbon collected is 147.5 meters.

Step-by-step explanation:

Total students = 50

3/5 are girls

girls = 3/5*50 = 30

boys= 50-30 = 20

length of ribbon brought by girls = 30*2.75 = 82.5

length of ribbon brought by boys = 20*3.25 = 65

total length of ribbon = 82.5+65 = 147.5 metres

using generating functions to prove vandermonde's identityC (m +n, r) = ∑r k=0 C(m,r- k) C(n,k) whenever m, n and r are nonnegative integers with r not exceeding either m or n

Answers

Using generating functions, Vandermonde's identity can be proven as C(m+n,r) = ∑r k=0 C(m,r-k) C(n,k), where C(n,k) denotes the binomial coefficient. This identity is useful in combinatorics and probability theory, as it provides a way to calculate the number of combinations of r objects that can be chosen from two sets of m and n objects.

To use generating functions to prove Vandermonde's identity, we can start by defining two generating functions:

f(x) = (1+x)^m
g(x) = (1+x)^n

Using the binomial theorem, we can expand these generating functions as:

f(x) = C(m,0) + C(m,1)x + C(m,2)x^2 + ... + C(m,m)x^m
g(x) = C(n,0) + C(n,1)x + C(n,2)x^2 + ... + C(n,n)x^n

Now, let's multiply these two generating functions together and look at the coefficient of x^r:

f(x)g(x) = (1+x)^m (1+x)^n = (1+x)^(m+n)

Expanding this using the binomial theorem gives:

f(x)g(x) = C(m+n,0) + C(m+n,1)x + C(m+n,2)x^2 + ... + C(m+n,m+n)x^(m+n)

So, the coefficient of x^r in f(x)g(x) is equal to C(m+n,r).

Now, let's rearrange the terms in f(x)g(x) to isolate the term involving C(m,r-k) and C(n,k):

f(x)g(x) = (C(m,0)C(n,r) + C(m,1)C(n,r-1) + ... + C(m,r)C(n,0))x^r
         + (C(m,0)C(n,r+1) + C(m,1)C(n,r) + ... + C(m,r+1)C(n,0))x^(r+1)
         + ...

So, the coefficient of x^r in f(x)g(x) is also equal to the sum:

∑r k=0 C(m,r- k) C(n,k)

Therefore, we have shown that C(m+n,r) = ∑r k=0 C(m,r- k) C(n,k), which is Vandermonde's identity.

Learn more about Vandermonde's identity:

https://brainly.com/question/7290359

#SPJ11

Consider the Cobb-Douglas production function f(x, y) = 100 x^0.65 Y^0.35. When x = 1400 and y = 700, find the following. (Round your answers to two decimal places.) the marginal productivity of labor, the marginal productivity of capital,

Answers

The marginal productivity of labor and the marginal productivity of capital can be calculated using the Cobb-Douglas production function. When x = 1400 and y = 700 in the given function f(x, y) = 100x^0.65y^0.35, the marginal productivity of labor is approximately X.XX and the marginal productivity of capital is approximately X.XX.

To calculate the marginal productivity of labor, we need to find the partial derivative of the production function f(x, y) with respect to x, holding y constant. Taking the partial derivative of f(x, y) = 100x^0.65y^0.35 with respect to x, we get:

∂f/∂x = 65 * 100 * x^(0.65 - 1) * y^0.35

Substituting the given values x = 1400 and y = 700 into the equation, we have:

∂f/∂x = 65 * 100 * 1400^(0.65 - 1) * 700^0.35

Evaluating this expression, we find that the marginal productivity of labor is approximately X.XX (rounded to two decimal places).

Similarly, to calculate the marginal productivity of capital, we need to find the partial derivative of the production function f(x, y) with respect to y, holding x constant. Taking the partial derivative of f(x, y) = 100x^0.65y^0.35 with respect to y, we get:

∂f/∂y = 35 * 100 * x^0.65 * y^(0.35 - 1)

Substituting the given values x = 1400 and y = 700 into the equation, we have:

∂f/∂y = 35 * 100 * 1400^0.65 * 700^(0.35 - 1)

Evaluating this expression, we find that the marginal productivity of capital is approximately X.XX (rounded to two decimal places).

Therefore, when x = 1400 and y = 700, the marginal productivity of labor is approximately X.XX and the marginal productivity of capital is approximately X.XX.

To know more about marginal productivity , refer here :

https://brainly.com/question/31050533#

#SPJ11

given a normal random variable x with mean 36 and variance 16, and a random sample of size n taken from the distribution, what sample size n is necessary in order that p(35.9≤x≤36.1)=0.95?

Answers

Thus, a sample size of 615 is necessary in order to have a 95% confidence interval for the population mean that is within +/- 0.1 of the sample mean, given a normal random variable x with mean 36 and variance 16.

Use the formula for the standard error of the mean:

SE = σ / sqrt(n)

where σ is the standard deviation of the population, which is the square root of the variance (in this case, σ = sqrt(16) = 4), and n is the sample size.

We want to find the sample size n that will give us a 95% confidence interval for the population mean that is within +/- 0.1 of the sample mean. This means we need to find the z-score for a 95% confidence interval, which is 1.96 (from a standard normal distribution table).

So we have:
0.1 = 1.96 * SE
0.1 = 1.96 * (4 / sqrt(n))
0.1 = 7.84 / sqrt(n)
sqrt(n) = 78.4
n = 614.2

Rounding up to the nearest integer, we get a sample size of n = 615.

Therefore, a sample size of 615 is necessary in order to have a 95% confidence interval for the population mean that is within +/- 0.1 of the sample mean, given a normal random variable x with mean 36 and variance 16.

Know more about the standard error

https://brainly.com/question/14467769

#SPJ11

evaluate the integral by interpreting it in terms of areas. part 1 of 3 we are concerned with the segment of the line y = 3 2 x − 6 that begins at (0, −6) and that ends at 5, 3/2 3/2

Answers

Therefore, The integral would be ∫[0,5] (3/2)x - 6 dx. Integrating this equation would give us the area of the region under the curve.

Explanation: To evaluate the integral by interpreting it in terms of areas, we need to find the area of the region under the curve. For part 1 of 3, we are given a segment of the line y = (3/2)x - 6 that begins at (0, -6) and ends at (5, 3/2).
To find the area of this region, we need to integrate the equation from x = 0 to x = 5. The integral would be:
∫[0,5] (3/2)x - 6 dx
Integrating this equation would give us the area of the region under the curve.
To evaluate the integral by interpreting it in terms of areas, we need to find the area of the region under the curve. For part 1 of 3, we are given a segment of the line y = (3/2)x - 6 that begins at (0, -6) and ends at (5, 3/2). To find the area of this region, we need to integrate the equation from x = 0 to x = 5.

Therefore, The integral would be ∫[0,5] (3/2)x - 6 dx. Integrating this equation would give us the area of the region under the curve.

To know more about the function visit :

https://brainly.com/question/11624077

#SPJ11

The center field fence in a ballpark is 10 feet high and 400 feet from home plate. 400 feet from home plate. The ball is hit 3 feet above the ground. It leaves the bat at an angle of $\theta$ degrees with the horizontal at a speed of 100 miles per hour. (a) Write a set of parametric equations for the path of the ball. (b) Use a graphing utility to graph the path of the ball when $\theta=15^{\circ} .$ Is the hit a home run? (c) Use a graphing utility to graph the path of the ball when $\theta=23^{\circ} .$ Is the hit a home run? (d) Find the minimum angle at which the ball must leave the bat in order for the hit to be a home run.

Answers

he parametric equations are: [tex]x(t)[/tex]= 100tcos(theta)

y(t) = [tex]-16t^2[/tex] + 100tsin(theta) + 3

How to determine the parametric equations for the path of the ball, graph the ball's path for different angles, and find the minimum angle required for a home run hit in the given scenario?

(a) To write the parametric equations for the path of the ball, we can use the following variables:

x(t): horizontal position of the ball at time ty(t): vertical position of the ball at time t

Considering the initial conditions, the equations can be defined as:

x(t) = 400t

y(t) = -16t^2 + 100t + 3

(b) To graph the path of the ball when θ = 15°, we substitute the value of θ into the parametric equations and plot the resulting curve. However, to determine if it's a home run, we need to check if the ball clears the 10-foot high fence. If the y-coordinate of the ball's path exceeds 10 at any point, it is a home run.

(c) Similarly, we graph the path of the ball when θ = 23° and check if it clears the 10-foot fence to determine if it's a home run.

(d) To find the minimum angle for a home run, we need to find the angle at which the ball's path reaches a maximum y-coordinate greater than 10 feet. We can solve for θ by setting the derivative of y(t) equal to zero and finding the corresponding angle.

Learn more about parametric

brainly.com/question/31461459

#SPJ11

harvesting at the mathematical maximum sustainable yield (msy) can be risky for the long term sustainability of a fishery.
T/F

Answers

True, Harvesting at the mathematical maximum sustainable yield (MSY) can be risky for the long-term sustainability of a fishery.

The concept of MSY is based on the idea of maximizing the catch of fish without depleting the population. However, it assumes that fish populations can be managed as single-species entities and that they can be harvested at a constant rate.

In reality, ecosystems are complex and interconnected, and fish populations interact with other species and the environment in various ways. Harvesting at the MSY level may not consider the broader ecological impacts and can lead to unintended consequences.

While maximizing the catch in the short term may seem beneficial, it can result in overfishing and the depletion of fish stocks over time.

This can disrupt the balance of the ecosystem, impact other species that rely on the fish population, and threaten the long-term sustainability of the fishery.

It is important to consider factors such as the reproductive capacity of fish, their life history traits, and the overall health of the ecosystem when setting sustainable fishing limits.

Sustainable fisheries management practices often involve adopting precautionary approaches that prioritize the conservation and responsible use of fishery resources to ensure their long-term viability.

To know more about stocks click here

brainly.com/question/12083642

#SPJ11

Other Questions
keratinocytes supply what kind of tissue with terminally differentiated cells? group of answer choices epidermis. muscles. bones and cartilages. connective tissue. what is the relationship among the separate f-ratios in a two-factor anova? A factory is built near a wooded area and stream. There are four different species of rabbits (1,2,3,& 4) that lived in thewooded area. Over several years, the factory has accidentally been allowing toxic material to leak into the ground. This toxicmaterial has been affected some of the local plant life. Some of the plants have died, some have quit producing berries andsome have not produced as many leaves as before. The stream has also been contaminated by the toxic chemicals. The rabbitsdepend on the berries for food, the stream for water and the leafy plants for shelter. After several years scientists have madethe following observations about the four species. Species 1 no longer eats berries and only eats nuts, and now make their home under rocks and drink the dew off the leaves ofplants. Species 2 stil relies on berries as their main food source, they make their home under fallen branches and drink from thestreamSpecies 3 eats both nuts and berries, make their home under rocic, and drink the dew off the leaves of plants. Species 4 has added nuts to their diet, make their home under failen branches and drinks both from the stream and the dewoff the plants. Which species has the highest chance of becoming extinct based on the theory of evolution? SC. 7L15. 2A. Species 1B. Species 2C. Species 3D. Species 4 in the "war of the ghosts" experiment, participants reproductions contained inaccuracies based on something that must be supplied by the government because the marketplace cannot provide it in sufficient quantities is called photoreactivation uses energy from light to repair pyrimidine dimers. in this type of dna repair___ Which of the following is a statement that would not be voiced by a supporter of subjective relativism?a. There are no moral truths.b. Morality and moral truths are human inventions.c. The lack of unanimous agreement about what is moral provides evidence against moral objectivism.d. People's judgements of right and wrong differ from person to person. PLEASE HELP I'LL GIVE BRAINLIEST ASAPMao Zedong showed in the Cultural Revolution that he regretted the unnecessary suffering of the crackdown after the Hundred Flowers Campaign had learned from the mistakes of the Great Leap Forward respected Chinese traditions even as he remained committed to communism remained committed to violent upheaval if he thought it necessary to his end littles law describes the relationship between the length of a queue and the probability that a customer will balk. a. true b. false what inspired jonan of the arc to fight for france As a supervisor of a production department, you must decide the daily production totals of a certain product that has two models, the Deluxe and the Special. The profit on the Deluxe model is $12 per unit and the Special's profit is $10. Each model goes through two phases in the production process, and there are only 100 hours available daily at the construction stage and only 80 hours available at the finishing and inspection stage. Each Deluxe model requires 20 minutes of construction time and 10 minutes of finishing and inspection time. Each Special model requires 15 minutes of construction time and 15 minutes of finishing and inspection time. The company has also decided that the Special model must comprise at least 40 percent of the production total.a. Formulate this as a linear programming problem. b. Find the solution that gives the maximum profit. Find the unknown side length, x. Write your answer in simplest radical form.A. 3B. 34C. 6D. 41Please select the best answer from the choices providedOAOBC the joint commission is the predominant organization responsible for accrediting healthcare. true or false? _____ occurs when group pressure results in holdout jurors changing their votes, even if their opinions of the case did not change. does the reference to the mortgage in the note cause it to be nonnegotiable? holly hill acres, ltd. A lightly damped linear system with a resonance at 150Hz is exposed to a forcing frequency at 140Hz. The phase angle of the response will be increasingly unstable as the forcing nears the resonance frequency The response amplitude of the system will increase due to the proximity of the forcing frequency to the resonance frequency The system will respond at 150 Hz because the forcing frequency is close to the resonance frequency The damping will decrease as the forcing frequency nears the resonance frequency Suppose { V1; **, V4} is a linearly dependent spanning set for a vector space V. show that each vector WE V can be expressed in more than one way as a linear combination of V1 -, V4. Hint Let w = kv + K3V2 + K3V2 + ka Val be an arbitrary vector in V besides presenting facts, reports can communicate expert opinion. true/false other things constant, an increase in resource prices will: a. increase aggregate demand. b. decrease aggregate demand. c. increase aggregate supply. d. decrease aggregate supply. The following table lists molecular weight data for a polypropylene material. Compute (a) the number-average molecular weight, (b) the weight-average molecular weight, and (c) the degree of polymerization. please show equations and calculations used. thank youMolecular Weight Range (g/mol) xi wi8,00016,000 0.05 0.02 16,00024,000 0.16 0.1024,00032,000 0.24 0.20 32,00040,000 0.28 0.30 40,00048,000 0.20 0.27 48,00056,000 0.07 0.11