what mutations that occur in noncoding sequences may affect gene?

Enzymes, and transport proteins, including mitochondrial proteins are among the proteins that aid in the chemical oxidation process for the production of energy.

The human body uses a variety of protein types to break down molecules for energy production.

The class of biological catalysts that speed up chemical processes in the body includes enzymes. Enzymes take part in several metabolic processes that transform proteins, lipids, and carbohydrates into simpler molecules that can be converted to energy.

The transport proteins are a different group of proteins involved in energy metabolism. These proteins help molecules traverse cell membranes so they can go to the places where energy is produced, such as glucose and amino acids.

Finally, there are the mitochondrial proteins, which are located in the mitochondria, the organelles responsible for energy production in the body. These proteins play a critical role in the electron transport chain and oxidative phosphorylation, which generate ATP, the main energy currency of the body.

Learn more about classes of protein at

https://brainly.com/question/17095120

#SPJ4

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.

Therefore, option b. NaOH is correct option.

An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.

Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.

As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.

for such more question on amine

https://brainly.com/question/9631835

#SPJ11

When an isotope has a greater proton to neutron ratio, the type of radioactive decay process that will occur is beta decay.

Radioactive decay is the process by which an atomic nucleus breaks down, releasing radiation in the form of particles or waves. This results in the decay of a radioactive element into a different element.

The following are the three major forms of radioactive decay:

Alpha decay, Beta decay, Gamma decay.

Alpha decay is the process by which an alpha particle is released by an atomic nucleus. The mass of the nucleus decreases by four units, while the atomic number decreases by two units.

Beta decay is the type of radioactive decay that occurs when an isotope has a greater proton to neutron ratio. The decay of a neutron into a proton and an electron is referred to as beta decay. The mass number of the nucleus stays constant, but the atomic number increases by one unit.

The radioactive decay process that occurs when an isotope emits a gamma ray is known as gamma decay. A gamma ray is a high-energy electromagnetic wave that carries no mass and no charge. The atomic number and mass number of the nucleus are both unchanged as a result of gamma decay.

For more such questions on isotope, click on:

https://brainly.com/question/14220416

#SPJ11

In refrigeration, the refrigerant is a substance that absorbs heat from the surrounding and dissipates it to produce cooling. The correct option is a. True.

What is thermal balance?

The thermal balance in a refrigeration system is achieved when the system has reached a stable state, that is, the amount of heat absorbed by the refrigerant is equal to the heat rejected by the refrigeration system. During the compression process, the refrigerant is compressed and pumped into the condenser where it undergoes condensation, i.e., it changes from a gas to a liquid by releasing heat.

In the condenser, the refrigerant rejects the heat that it absorbed in the evaporator and releases it to the surrounding. The condensation process reduces the number of vapor molecules in the refrigerant, which leads to an increase in the number of liquid molecules.

Therefore, the number of vapor molecules that condense into liquid equals the number of vapor molecules that the compressor pumps into the condenser. This is because the compressor has to maintain a constant flow of refrigerant in the refrigeration system to achieve thermal balance.

Hence, the statement is a) true.

To know more about Thermal balance:

brainly.com/question/16749661

#SPJ11

(a) The number of moles of oxygen gas (O₂) that reacted is 0.00325 mol.

(b) When the experiment is repeated without a lid on the crucible, the magnesium oxide produced will react with any oxygen present in the air.

(a) To calculate the number of moles of oxygen gas (O₂) that reacted, we need to first determine the number of moles of magnesium that reacted using its atomic mass:

Mass of magnesium (Mg) = 0.12 g

Atomic mass of Mg = 24.31 g/mol (from periodic table)

Number of moles of Mg = Mass of Mg / Atomic mass of Mg

= 0.12 g / 24.31 g/mol

= 0.00494 mol

The balanced chemical equation for the reaction between Mg and O₂ to produce MgO is:

2Mg + O₂ → 2MgO

From the equation, we can see that 2 moles of Mg react with 1 mole of O₂ to produce 2 moles of MgO.

Therefore, the number of moles of O₂ that reacted can be calculated as follows:

Number of moles of MgO produced = Mass of MgO / Molar mass of MgO

= 0.20 g / (24.31 g/mol + 16.00 g/mol)

= 0.00650 mol

Since 2 moles of MgO are produced from 1 mole of O₂, the number of moles of O₂ that reacted can be calculated as:

Number of moles of O₂ = Number of moles of MgO produced / 2

= 0.00650 mol / 2

= 0.00325 mol

(b) When the experiment is repeated without a lid on the crucible, the magnesium oxide produced will react with any oxygen present in the air. This will cause the mass of magnesium oxide produced to be greater than when the experiment was conducted with a lid on the crucible, as more oxygen will react with the magnesium.

Additionally, any water vapor or other gases present in the air may also react with the magnesium oxide, further affecting the mass of the final product. Therefore, the mass of magnesium oxide produced will be different without a lid on the crucible due to the presence of additional reactants in the air.

Learn more about number of moles here: https://brainly.com/question/13314627

#SPJ1

A competitive inhibitor competes with the substrate for binding during an enzymatic process by attaching to the enzyme's active site. When the inhibitor prevents the substrate from attaching and turning into product, the rate of the reaction decreases as a result.

The presence of the competitive inhibitor can still cause the reaction to slow down even though the pH and temperature are optimal for the reaction. This is because the inhibitor is attaching to the enzyme's active site, which is required for the reaction to take place. As a result, the enzyme cannot convert the substrate into the product as well as it might if the inhibitor were not present.

Increasing the amount of substrate such that it competes with the inhibitor for binding to the enzyme's active site can help overcome the inhibition. Another choice is to chemically or by employing an alternative enzyme that is unaffected by the inhibitor remove it from the reaction mixture.

learn more about enzymatic process here:

https://brainly.com/question/28827774

#SPJ4

The furanose form of fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon  2  with carbon 5  .

Option 1 is correct..

In its linear form, fructose has a ketone functional group on carbon 2 and five hydroxyl groups. In aqueous solutions, fructose can undergo a reversible intramolecular reaction between the ketone group and one of the hydroxyl groups, resulting in the formation of a cyclic hemiketal ring.

The furanose form of fructose is an important carbohydrate molecule that plays a key role in many biological processes, such as energy metabolism and signal transduction. It is also used as a sweetener in various food and beverage products. Correct option is: 1.

To know more about hemiketal ring, here

brainly.com/question/13063932

#SPJ4

-- The complete question is, Complete the statement: The furanose form of fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon _____ with carbon _____.

1. 5; 2

2. 2; 6

3. 6; 1

4. 6; 2 --

Actually, when atomic radius grows, electronegativity often decreases.

The capacity of an atom to draw electrons into a chemical connection is known as electronegativity. The separation between the nucleus and the farthest electrons grows with increasing atomic radius. As a result, the nucleus's attraction to the electrons is reduced, making it more challenging for the atom to draw electrons to itself. The electronegativity values of bigger atoms are therefore often lower than those of smaller ones. Despite this general tendency, there are certain outliers since electronegativity also depends on other elements including nuclear charge and electron configuration. For instance, the rising nuclear charge in halogens causes the electronegativity to rise as the atomic radius falls.

learn more about electronegativity here:

https://brainly.com/question/17762711

#SPJ4

Based on the information provided, the correct answer is:

Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.

This is because when the scientist transferred the same amount of energy out of both substances, only one substance changed phase while the other did not. This indicates that one of the substances has a lower boiling point than the other. Since both substances are liquids at room temperature, it means that the substance that changed phase must have vaporized (turned into gas) while the other substance did not.

Substance R must have a weaker intermolecular force of attraction between its molecules compared to Substance Q. This means that Substance R has a lower boiling point, which allowed its molecules to move around each other and form a gas phase when energy was transferred out of it. In contrast, Substance Q remained in the liquid phase because its molecules had stronger intermolecular forces of attraction that held them together.

To know more about Molecules, visit: brainly.com/question/19922822

#SPJ4

The simple distillation of cyclohexane: toluene resulted in a better separation of the two liquids than cyclohexane: p-xylene, due to the boiling points of these liquids.

In the distillation process, the mixture of liquids is heated in a flask, and the vapors of one liquid are separated from the mixture and then collected in another flask, as it reaches the condenser. The vapors condense to liquid form as they come in contact with the cold walls of the condenser.

The separation process in simple distillation depends on the difference in the boiling points of two liquids. In the given question, the boiling point of cyclohexane is 80.7°C, the boiling point of toluene is 110.6°C, and the boiling point of p-xylene is 138.4°C.

As we can see, toluene has a higher boiling point than cyclohexane, while p-xylene has a higher boiling point than toluene. Therefore, the boiling point difference between cyclohexane and toluene is 29.9°C, while the boiling point difference between cyclohexane and p-xylene is 57.7°C.

Thus, it is expected that simple distillation of cyclohexane: toluene resulted in a better separation of the two liquids than cyclohexane: p-xylene. Because the boiling point difference of cyclohexane: toluene is less than that of cyclohexane: p-xylene.

The difference in the boiling points of two liquids is a crucial factor in the separation of two liquids through simple distillation. The smaller the boiling point difference between the two liquids, the better is the separation through simple distillation. Thus, the simple distillation of cyclohexane: toluene resulted in better separation than cyclohexane: p-xylene.

Learn more about distillation here: https://brainly.com/question/24553469.

#SPJ11

The pair of aqueous solutions that will produce a precipitate when mixed is K2CO3 & HNO3.

The precipitate is a solid substance that separates from a solution after mixing with another solution.

Precipitation reactions are those in which two aqueous solutions, which are known as reactants, create an insoluble solid product, known as a precipitate.

The pair of aqueous solutions that will produce a precipitate when mixed is: K2CO3, HNO3

In this pair of aqueous solutions, the potassium carbonate (K2CO3) is an ionic compound with a metal and non-metal.

When potassium carbonate is dissolved in water, it dissociates into K+ and CO3^2- ions.

Nitric acid (HNO3) is an aqueous solution of hydrogen ions and nitrate ions. These two solutions will react to form a precipitate of potassium nitrate (KNO3).

Here's the chemical equation for this precipitation reaction: K2CO3 (aq) + 2HNO3 (aq) → 2KNO3 (aq) + H2O (l) + CO2 (g)

To know more about precipitate, refer here:

https://brainly.com/question/29762381#

#SPJ11

The percentage yield of CaSO3 is approximately 69%.

CaCO3 + SO2 → CaSO3 + CO2

Number of moles of CaCO3 = 255 g / 100.09 g/mol = 2.549 mol

Number of moles of SO2 = 135 g / 64.06 g/mol = 2.109 mol

Since the reaction is 1:1 stoichiometric, the number of moles of CaSO3 formed is 2.109 mol. We can then calculate the theoretical yield of CaSO3:

Theoretical yield of CaSO3 = 2.109 mol x 136.14 g/mol = 286.9 g

Percentage yield = (Actual yield / Theoretical yield) x 100%

The actual yield is given as 198 g. Plugging in the values, we get:

Percentage yield = (198 g / 286.9 g) x 100% ≈ 69%.

Stoichiometric is the study of the quantitative relationship between reactants and products in a chemical reaction. The stoichiometric ratio is the ratio of the moles of one substance to the moles of another substance in a chemical reaction.

For example, consider the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O). The balanced chemical equation for this reaction is 2H2 + O2 → 2H2O. The stoichiometric ratio for this reaction is 2:1. This means that for every two moles of hydrogen gas reacted, one mole of oxygen gas is required to completely react with it and form two moles of water.

Stoichiometric is important in chemical reactions because it allows us to determine the number of reactants needed to produce a certain amount of product or the amount of product that can be produced from a given amount of reactants. This information is crucial in industrial and laboratory settings where the cost of materials and the desired yield of the product are important factors.

To learn more about Stoichiometric visit here:

brainly.com/question/6907332

#SPJ4

You are measuring the speeds of two particles at the same conditions. The more massive particle will move At a slower speed. The correct option is C. At a slower speed.

When you measure the speeds of two particles at the same conditions, the more massive particle will move at a slower speed than the less massive particle. This is because the speed of a particle is directly proportional to its kinetic energy. The more massive particle has more kinetic energy than the less massive particle. Thus, it will require more energy to move the more massive particle at the same speed as the less massive particle. Since the more massive particle has more inertia, it requires more energy to move it, and it moves slower. This is why the more massive particle will move at a slower speed than the less massive particle. The energy required to move an object increases with its mass.

Therefore, if two particles of different masses are at the same conditions, they will have different speeds. The less massive particle will move faster than the more massive particle. Thus, it can be concluded that the speed of a particle depends on its mass, and a more massive particle moves slower than a less massive particle.

for such more question on massive particle

https://brainly.com/question/29508018

#SPJ11

The type of inhibition for each enzyme in the presence of its inhibitor is as follows:

What is enzyme inhibition?

Inhibitors that do not contribute to the development of the product carry out the inhibition. The inhibitors can impact both the substrate and the enzyme. The stoppage of enzyme activity is referred to as enzyme inhibition.

To determine the type of inhibition for each enzyme in the presence of its inhibitor, we can compare the kinetics data for the enzyme alone and in the presence of the inhibitor. Specifically, we can compare the changes in KM and Vmax values.

Therefore, the type of inhibition for each enzyme in the presence of its inhibitor is as follows:

Learn more about enzyme inhibition on:

https://brainly.com/question/14944549

#SPJ11

The empirical formula for oxalic acid is C2H2O2.

Oxalic acid, which is present in rhubarb, was found to consist of 26.68% C, 2.24% H, and 71.08% O by mass.

Empirical formula is the simplest formula that represents the composition of a compound in terms of atoms, and it can be obtained by calculating the ratio of atoms of each element in the compound.

The empirical formula of oxalic acid can be found by assuming 100 g of the compound so that the mass percent can be expressed as grams of each element. In the next step, these grams will be converted into moles for each element using their molar mass. The empirical formula will then be the ratio of atoms for each element in the compound.

Let's find out the number of moles of each element in oxalic acid.

C = 26.68 g = 26.68 / 12.01 = 2.22 molH = 2.24 g = 2.24 / 1.01 = 2.22 molO = 71.08 g = 71.08 / 16.00 = 4.44 mol

As the atomic ratios are the same for all three elements, the empirical formula is C2H2O2, and this formula is also called the simplest formula for oxalic acid. The empirical formula for oxalic acid is C2H2O2.

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

For E2 elimination reactions to occur, chair conformations of halocyclohexanes must have both the H and the X atoms in axial positions. The E2 elimination reaction is a type of elimination reaction that is dependent on the substrate and the strength of the base used. It is a bimolecular process that happens when two molecules, the substrate, and the base, collide with each other.

The E2 reaction is a one-step process in which the leaving group and the hydrogen ion are lost from the substrate at the same time, resulting in the formation of a pi bond. In a halocyclohexane molecule, there are two positions for the H and X atoms, axial and equatorial.

However, in order for the E2 reaction to occur, the H and X atoms must be in axial positions so that they are in the same plane as the leaving group. This ensures that the hydrogen ion and the leaving group can be lost from the substrate at the same time, resulting in the formation of a pi bond.

Know more about  elimination reactions here:

https://brainly.com/question/29695970

#SPJ11

Buffers are made from weak conjugate acid-base pairs. In part 1 of this experiment, a solution of weak acid is mixed with another solution of weak acid to which the strong base NaOH has been added.

What is a buffer?

A buffer is a solution that can resist changes in pH when acid or base is added. They are used to keep the pH of solutions stable in various chemical and biological systems, including industrial processes, drugs, and the human body. A buffer is a mixture of a weak acid and its conjugate base or a weak base and its conjugate acid.The following are the features of a buffer:It is a solution that resists changes in pH.It consists of a weak acid and its corresponding base.The buffering effect is maximized when the ratio of weak acid to its corresponding base is 1:1.A buffer resists pH changes in either direction, and it has a maximum buffering capacity when pH is within one unit of its pKa. The buffering capacity of the solution is increased by increasing the buffer concentration.

A weak acid is one that only partially dissociates in water to produce hydrogen ions (H+) and anions. Its conjugate base is the species that results from the removal of a proton from the acid. As an example, ammonia (NH3) is a weak base, and its conjugate acid is ammonium (NH4+). The reverse reaction produces the acid and base when the acid is added to water.

Learn more about buffer solution on:

https://brainly.com/question/8676275

#SPJ11

To help the crystals form, these three options are correct- 1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent. 2. Add a scrap of paper to nucleate the crystals. 3. Add some crystals of the compound you are trying to crystallize.

Crystallization is the process of a solid material forming a structured arrangement of its particles, typically resulting in a highly ordered and often repeating pattern. This can be seen in the formation of solid crystals such as salt, sugar, and diamonds. Crystallization occurs when molecules of the solid tend to organize themselves into a more ordered pattern.

Adding a scrap of paper to nucleate the crystals is a process known as seeding. Seeding involves introducing a small crystal into a container of supersaturated solution, which then provides a nucleus for additional crystals to form around. This process accelerates the growth of the crystals and can be used to create larger, more consistent crystals. It can also be used to create crystals with specific shapes and sizes. The addition of a scrap of paper encourages the solution to form around it, helping to encourage the formation of crystals.

To know more about Erlenmeyer flask, visit:

https://brainly.com/question/10261429

#SPJ1

Amino acids as acidic, basic, neutral polar, or neutral nonpolar are

Part A: NH₂: Basic, CH₃: Neutral nonpolar, CH₃: Neutral nonpolar, CH: Neutral nonpolar, NH₂: Basic, CH₂: Neutral nonpolar, H,N-C-coo: Acidic

Part B: OH: Neutral polar, CH₂: Neutral nonpolar, HON-C-COO: Acidic, H,N-C-COO: Acidic.

Acidic amino acids: These amino acids have a carboxyl group (COOH) in their side chain, which makes them acidic. They can donate a hydrogen ion (H+) and have a negative charge at physiological pH.

Basic amino acids: These amino acids contain an amino group (NH2 or NH3+) in their side chain, which makes them basic. They can accept a hydrogen ion (H+) and have a positive charge at physiological pH.

To learn more about the Amino acids, follow the link:

https://brainly.com/question/31872499

#SPJ12

The Ka value is 2.2x10⁻³ in scientific notation with two significant figures.

To explain in brief, Ka is the acid dissociation constant that measures the strength of an acid.

The formula is used to find the value of the Ka constant when we have the molar concentration and the pH of the solution.

The calculation is done as follows:

Ka = [H₃O⁺]² / [HA]

Here, H₃O⁺ is the hydronium ion, which is formed when an acid is dissolved in water, and HA represents the acid.

Therefore, in order to determine the Ka value, we need to find the concentration of H₃O⁺ ions in the given solution.

Since pH = - log[H₃O⁺],

we can calculate [H₃O⁺] as follows:

2.98 = -log[H₃O⁺] = 10⁻²⁹⁵ = 1.28 × 10⁻³ M

Now, we can use the formula to find Ka:

Ka = [H₃O⁺]² / [HA]

= (1.28 × 10⁻³))² / 0.22

= 2.2 × 10⁻⁵

Therefore, the Ka value for the given acid is 2.2 × 10⁻⁵.

Learn more about dissociation constants here:

https://brainly.com/question/30930515

#SPJ11

The heat transfer during the combustion of n-octane gas (C8H18) with 95% excess air in a constant pressure burner is 37039 kJ/kg fuel. This is calculated using the enthalpy of the formation of the products and reactants. The air and fuel enter the burner steadily at standard conditions, and the products of combustion leave at 265°C.

The enthalpy of combustion of the fuel is determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products. The enthalpy of formation of the reactants is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result.

The enthalpy of formation of the products is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result. The heat transfer during combustion is then determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products, resulting in 37039 kJ/kg fuel.

The heat transfer during the combustion of n-octane gas (C8H18) can be calculated using the formula Q = m × Cp × ΔT. Here, m is the mass of the fuel burnt, Cp is the specific heat capacity, and ΔT is the change in temperature. Let's substitute the given values: Mass of fuel burnt = 1 kg (since 37039 kJ/kg fuel is given)Cp of n-octane gas = 2.22 kJ/kg/K (given)ΔT = (265 - 25) = 240 K (since the temperature of products is given as 265°C = 538 K and standard temperature is 25°C = 298 K)Therefore, the heat transfer during combustion of n-octane gas is: Q = m × Cp × ΔT = 1 × 2.22 × 240 = 532.8 kJAnswer: The heat transfer during this combustion is 532.8 kJ.

For more information follow the link: https://brainly.com/question/14754029

#SPJ11

The combination electrode in the given drawing is made up of a reference electrode and a working electrode.

The working electrode in the given combination electrode is made up of a platinum wire. The platinum wire is coated with platinum black. This is the black substance on the lower part of the platinum wire in the given drawing.

The reference electrode is made up of a silver wire that is coated with silver chloride. A small amount of KCl solution is placed in the tube at the top of the silver wire.

The string that is attached to the combination electrode is used to immerse the electrode in a solution. It is attached to the top of the reference electrode. The string also acts as a support to prevent the combination electrode from sinking into the solution being measured.

The string should be attached to the top of the reference electrode. When the combination electrode is immersed in the solution, the string should be at the top so that the electrode does not sink into the solution being measured.

See more about electrode in:

https://brainly.com/question/17362810

#SPJ11

The "y" in a calibration curve using the formula y = mx + b stands for a solution's absorbance (or optical density). The quantity of light at a specific wavelength that a material absorbs is measured by its absorbance, which is directly proportional to both.

the substance's concentration in solution and the length of the light's passage through the solution. The wavelength of maximum absorbance of the material being evaluated determines the molar absorptivity, a constant, whereas the path length is the distance that light travels through the solution, often stated in centimetres. Thus, the "y" variable in the equation y = mx + b reflects the solution's absorbance that is being measured.The absorbance (or optical density) of the solution being tested is represented by the "y" variable in the equation y = mx + b. The quantity of light at a specific wavelength that is absorbed by a material in solution is measured by its absorbance, which is directly proportional to both the substance's concentration and the length of the light's passage through the solution.

learn more about calibration curve here:

https://brainly.com/question/29729322

#SPJ4

The bond which would be the most polar without being considered ionic is O-H. Thus, option e is correct.

What is a polar bond?

A polar bond is defined as a bond between two atoms where there is an uneven distribution of electrons between the atoms.

What is an ionic bond?

Ionic bonds are bonds that occur between two atoms when one atom donates its electron to another atom, resulting in the two atoms being electrically attracted to each other.

Polar covalent bonds occur when electrons are unequally shared between two atoms.

This occurs when two atoms have different electronegativity values, meaning that one atom pulls more strongly on the shared electrons than the other atom.

Thus, the O-H bond would be the most polar without being considered ionic.

Learn more about polar bonds here:

https://brainly.com/question/545359

#SPJ11

By supplying more energy to counteract intermolecular interactions and increasing contact between solvent and solute, raising temperature, agitation, surface area, or lowering particle size can enhance solubility.

A substance's solubility refers to its capacity to dissolve in a solvent. Intermolecular forces between the solute particles are broken during the dissolving process, and new connections with the solvent molecules are created. Solubility can be raised by adding extra energy to break through these intermolecular connections. Although agitation and expanding surface area improve the contact between the solvent and solute, rising temperature releases more thermal energy to break the intermolecular interactions. By increasing surface area per unit volume, particle size reduction increases interaction with the solvent. Moreover, by giving the solute additional solvation sites, more solvents or surfactants can be added to increase solubility.

learn more about solubility here:

https://brainly.com/question/29857840

#SPJ4

Answer:

b. mainly saltwater

Explanation:

The characteristic that is not true for rivers and streams is option b - mainly saltwater. Rivers and streams are freshwater bodies of water that flow from higher elevations to lower elevations, and eventually empty into larger bodies of water such as lakes, oceans, or other rivers. They are a vital component of the water cycle, and can vary in size from small streams to large rivers that span entire continents.

Answer:

B

Explanation:

Saltwater is not a characteristic of rivers and streams. Rivers and streams are typically freshwater systems, with only a few exceptions where they may be brackish or slightly salty due to their proximity to the ocean or underground salt deposits.

Thermochemical equation for the chemical reaction is: 2KClO₃(s)→ 2KCl(s) + 3O₂(g), ΔH = -78.0kJ.

Potassium chlorate (KClO₃) decomposes into potassium chloride (KCl) and oxygen gas (O₂). When 2 mol of KClO₃ crystals decompose to KCl crystals and O₂ gas at constant temperature and pressure, 78.0 kJ of heat is given off. KClO₃(s) → KCl(s) + 3/2 O₂(g)

For every mole of KClO₃(s), there is the production of one mole of KCl(s) and 1.5 moles of O₂(g).Therefore, for the formation of 2 mol of KClO₃(s), the quantities of the products are: 2 mol KClO₂(s) → 2 mol KCl(s) + 3 mol O₂(g)

The thermochemical equation for the reaction is:2KClO₃(s) → 2KCl(s) + 3O₂(g), ΔH = -78.0kJ

Learn more about Thermochemical equation here:

https://brainly.com/question/2874342

#SPJ11

Each of the functions in column A will be performed by their respective hormones. Each of the hormones in the human body has a different function.

A hormone is a chemical substance that is produced by a gland or a group of cells and is transported by the bloodstream to target cells or organs in the body. They are produced by endocrine glands.

To answer your question:

To know more about hormones, visit:

https://brainly.com/question/24383458

#SPJ1

Conjugate acid forms by adding H+ to a base, making a species with a positive charge. Strength depends on the base's strength. Important in acid-base reactions.

The conjugate acid of a base is the species that is formed when a proton (H+) is added to the base molecule. It has one more proton than the base and will have a positive charge. The strength of the conjugate acid depends on the strength of the original base, with the conjugate acid of a weak base being a weak acid, and the conjugate acid of a strong base being a weak acid. The formulas for the conjugate acids of the given bases are C2H5NH3+ for C2H5NH2, HClO4 for ClO4-, H2PO4- for HPO42-, and H2CO3 for HCO3-. Understanding conjugate acids is important in acid-base chemistry because it helps to explain the behavior of acids and bases in chemical reactions.

learn more about conjugate acid here:

https://brainly.com/question/30164261

#SPJ4

If four molecules of carbon dioxide enter the Calvin cycle (four "turns" of the cycle), eight G3P molecules are produced, and four G3P molecules are exported is d. 8 G3P made, 4 G3P exported.

The Calvin cycle is the collection of chemical reactions that occur in chloroplasts during photosynthesis. The Calvin cycle transforms CO2, using the energy from ATP and NADPH produced in the light reactions, into the sugar G3P. Three G3P molecules are created for every three CO2 molecules that enter the cycle. Every G3P molecule has three carbon atoms. If four molecules of CO2 enter the Calvin cycle (four "turns" of the cycle), eight G3P molecules are produced, and four G3P molecules are exported.

In the first step of the Calvin cycle, three CO2 molecules are combined with three RuBP molecules to form six 3-PGA molecules, which are then converted into six G3P molecules. However, five of the six G3P molecules must be recycled into RuBP so that the cycle can continue. As a result, only one G3P molecule out of the six created is exported from the cycle. So, every four CO2 molecules that enter the Calvin cycle create two G3P molecules that are exported out of the cycle.

Learn more about calvin cycle at:

https://brainly.com/question/30668606

#SPJ11