What plates are involved and meet across the east anatolian fault?

Answers

Answer 1

The Anatolian Plate and the northward-moving Arabian Plate are involved and meet across the east Anatolian fault.

In eastern Turkey, there is a significant fault called the East Anatolian Fault. Because of the collision of the Arabian Plate with the Anatolian Plate, a complicated fault system has developed. A collection of strike-slip faults that are broadly east-west orientated define the fault.

The Arabian Plate and the Anatolian Plate are the two plates that came into contact with one another and formed the East Anatolian Fault. The East Anatolian Fault is the result of the contact between the Arabian Plate, which is migrating northward towards the Anatolian Plate at a rate of roughly 2 cm per year, and these two plates.

The East Anatolian Fault is a significant tectonic boundary in the area and has historically been the source of numerous significant earthquakes. The fault is active right now and is regarded as a seismically active and earthquake-prone region.

To know more about east Anatolian fault

brainly.com/question/30871710

#SPJ4


Related Questions

What causes interstellar absorption?

Answers

Interstellar absorption is caused by the presence of dust and gas between stars. Dust and gas are made up of atoms and molecules that absorb and scatter light from stars, making them appear fainter. This is why stars appear dimmer when viewed from Earth.
Interstellar absorption is caused by the presence of gas and dust particles in the interstellar medium. These particles absorb some of the light that travels through the interstellar medium, causing the light to appear dimmer or redder than it would otherwise.

This effect is particularly noticeable for stars that are located behind large clouds of gas and dust, as their light has to travel through more of the interstellar medium before it reaches us. The amount of interstellar absorption that occurs depends on the density and composition of the gas and dust particles, as well as the distance that the light has to travel.

To learn more about Interstellar here:

https://brainly.com/question/13243177#

#SPJ11

how to define the water table?

Answers

The water table is defined as the upper surface of an underground layer of water in the soil or rock. It is the point below which the ground is saturated with water. The water table can rise and fall depending on the amount of precipitation, the amount of water being used, and other natural and man-made factors.

The water table is defined as the level below which the ground is saturated with water. It is the upper surface of the zone of saturation, which is the area where all the pores and fractures in the soil or rock are filled with water. The water table is an important factor in determining the availability of groundwater for drinking and irrigation purposes.

It is important to note that the water table is not a fixed level, but rather it fluctuates depending on a variety of factors, such as the amount of precipitation, the rate of evaporation, and the amount of water being withdrawn from the ground. The water table can also vary seasonally and from one geographic region to another.

In summary, the water table is the level below which the ground is saturated with water, and it is an important factor in determining the availability of groundwater for various purposes.

To know more about water table refer here:

https://brainly.com/question/30192753#

#SPJ11

Where to find Earth Crystal in Stardew Valley?

Answers

Earth Crystals can be found in the Mines, particularly from floors 1-39, or can be obtained from Geodes.

Earth Crystals are a type of mineral in the game Stardew Valley. They are primarily obtained by mining in the Mines, particularly from floors 1-39, where they have a chance of appearing in rocks and barrels. They can also be obtained by breaking open Geodes with a Geode Crusher, which can be purchased from the Blacksmith.

Additionally, Earth Crystals have a chance of appearing as a random drop from Duggies, Dust Sprites, and Rock Crabs, which are enemies that can be encountered in the Mines. Earth Crystals are used in a variety of crafting recipes, including for building sprinklers and bee houses, as well as for completing certain quests.

Learn more about "Earth Crystal" here:

https://brainly.com/question/13688951

#SPJ11

What happens to the water after an ice burg is formed?

Answers

The melting process occurs when icebergs travel into warmer waters. The iceberg would be difficult to wrap below the water's surface it happens to the water after an ice burg is formed.

Why is fresh water used to create icebergs?

Icebergs are initially devoid of salt. Icebergs aren't chunks of seawater that have frozen over. Icebergs are actually bits of freshwater that were once on land and have now become frozen.

Here, the main issue is melting. If you've ever run tap water over an ice cube, you are aware of how quickly an ice cube may melt, even when the water is cold. Wind chill is caused by the same process, but the effect is stronger in the presence of rushing water.

Therefore, the melting process occurs when icebergs travel into warmer waters. The iceberg would be difficult to wrap below the water's surface it happens to the water after an ice burg is formed.

To know more about the iceberg, visit:

https://brainly.com/question/4965256

#SPJ9

From the timing of lunar eclipses, the Ancient Greeks were able to
(A) conclude that the Sun is farther from the Earth than the Moon.
(B) calculate the distance from the Earth to the Moon.
(C) calculate the distance from the Earth to the Sun.

Answers

From the timing of lunar eclipses, the Ancient Greeks were able to (B) calculate the distance from the Earth to the Moon.

Definition of Lunar Eclipse

A lunar eclipse is a phenomenon when the moon is covered by the earth's shadow, either partially or completely. This lunar eclipse can be observed without using special tools such as telescopes or binoculars.

Simply put, this lunar eclipse process occurs when the earth is between the sun and the moon. The moon revolves around the earth, while the earth revolves around the sun. Then when the earth line is drawn it is in the middle between the sun and the moon. Therefore, the sun's light to the moon is covered by the earth.

As is known, the moon can be seen shining at night because it reflects the sun's light, but during an eclipse, the light that should make the moon shine is covered by the earth. The process of the occurrence of lunar eclipses always occurs in the afternoon until night.

Learn more about lunar eclipse at

https://brainly.com/question/29775053

#SPJ4

what has happened to the water that remains in the aral sea

Answers

The Aral Sea dried up because the waters of its supply rivers have been diverted for irrigation.

The waters of fundamental rivers, the Syr Darya and the Amu Darya, have been used for cotton cultivation, reducing the ocean's water degree over the years. The Aral Sea started out to speedy cut back due to the evaporation of its now unreplenished waters. By 1989 the Aral Sea had receded to shape separate parts, the “Greater Sea” withinside the south and the “Lesser Sea” withinside the north, every of which had a salinity nearly triple that of the ocean withinside the 1950s. The Aral seabed had come to be a desolate tract and 90% of the Aral Sea's extent had disappeared. By the overdue 70s the economic fishery had declined via way of means of over 7% after which collapsed some years later.

To learn more about Aral Sea check the link below:

https://brainly.com/question/1452067

#SPJ4

Why spring tides are higher than the neap tides?

Answers

When the sun, moon, and Earth align up, spring tides occur, which result in substantially greater regular high tides and low tides.

When the sun, moon, and Earth create a straight angle, neap tides occur, which cause the normal high tides and low tides to become substantially lower than usual.We experience neap tides twice a month and two spring seasons. On the other hand, some spring tides are greater than others. This is due to the fact that tides are amplified when the moon is closest to Earth in its eccentric orbit (astronomers call this perigee). The moon faces the Earth at a right angle to the sun when there are two spring tides.The moon's and the sun's pull are weak at this time. Lower-than-normal tides result from this. Neap tides are what these tides are called.

Learn more about spring tides  here:

https://brainly.com/question/20316018

#SPJ4

the vibrations we feel when sudden movement occurs along a fault are called?

Answers

The vibrations that are felt during sudden movement along a fault are commonly referred to as earthquakes.

An earthquake is a sudden movement of the Earth's crust caused by the release of built-up tension in the Earth's crust. The energy released by earthquakes can cause the ground to shake, sometimes violently. Earthquakes can have a range of magnitudes, from small and barely noticeable to large and destructive.

The severity of an earthquake is often measured using the Richter scale, which assigns a magnitude to the quake based on its size and the amount of energy it releases. When the tectonic plates that make up the Earth's crust suddenly shift and release their stored energy, the resulting ground motion can cause damage to buildings and other structures, disrupt transportation and communication systems, and result in loss of life.

You can read more about earthquakes at https://brainly.com/question/20409140#:

#SPJ4

If you're studying a political map (Formal Map), which
variable are you most likely to be examining?
Percentage of citizens who are registered as Democrats
Percentage of citizens who regularly vote in elections
O Locations of states and their capitals
O Types of government systems

Answers

Answer: c) Locations of states and their capitals

Explanation:

why do most tornadoes occur in the late afternoon?

Answers

While they can strike at any time of the day or night, most tornadoes form in the late afternoon. In the meantime, the sun has warmed the earth and the atmosphere enough for thunderstorms to occur.

The required details for thunderstorms in given paragraph

A thunderstorm, also called an electric storm or thunderstorm, is a storm characterized by the presence of lightning and its acoustic effect on the Earth's atmosphere, called thunder. Relatively light thunderstorms are sometimes called showers. Thunderstorms occur in a type of cloud called a cumulonimbus cloud. They are usually accompanied by strong winds and often produce heavy rain and occasionally snow, sleet, or hail, but some thunderstorms produce little or no precipitation. Thunderstorms can line up or form a band of rain called a thunderstorm line. Severe or severe thunderstorms are some of the most dangerous weather phenomena, including large hail, high winds, and tornadoes. Some of the most persistent storms, known as supercells, rotate degrees, just like cyclones.

While most storms move through the tropospheric layer they occupy with an average wind flow, vertical wind shear sometimes causes them to be deflected perpendicular to the direction of the wind shear.

To know about thunderstorms click here

https://brainly.com/question/25408948

#SPJ4

a place where two plates slip past each other, moving in opposite directions, is known as a

Answers

A place where two tectonic plates slip past each other, moving in opposite directions, is known as a transform boundary.

Transform boundaries are characterized by the absence of volcanic or seismic activity, and their movement can result in frequent earthquakes. As the plates move in opposite directions, the friction between them causes a buildup of stress that is eventually released in the form of seismic waves. One famous example of a transform boundary is the San Andreas Fault in California, where the Pacific Plate is moving northward relative to the North American Plate. Transform boundaries are an important component of plate tectonics and play a crucial role in shaping the Earth's surface. A place where two tectonic plates slip past each other, moving in opposite directions, is known as a transform boundary.

Learn more about Pacific Plate :

https://brainly.com/question/2566632

#SPJ4

What is the purpose or importance of each piece of equipment needed for birding?

Answers

Answer:

The equipment that is needed for birding can have a positive impact on your health. For example, boots are needed to prevent your feet getting wet and binoculars are needed to see birds clearly and up close so you don't need to squint.

2. What factors led to the flooding in Haiti in 2004?

Answers

The factors that led to the flooding in Haiti in 2004 were:

The deforestation and construction in the upper riparian areas of the river which led to flooding in the lower areas.

The  drainage infrastructure is not well developed.

What is flood?

A flood is a condition in an area when an area is fully or partially undergoes under water for a period of time. The flooding can happen due to natural and man- made causes.

The natural causes are heavy rainfall for along continuous time period. The made causes are dam construction and leakage or breaking of dam and construction along the river valleys.

The factors that led to the flooding in Haiti in 2004 were the deforestation and construction in the upper riparian areas of the river which led to flooding in the lower areas and the  drainage infrastructure is not well developed.

Learn more about floods here:

https://brainly.com/question/1567872

#SPJ9

HELP PLEASEEEE NO TROLLING

Go onto the internet and research the Tri-Sate tornado further in order to find the damages and effect it had on the environment. Write out the effect in two separate paragraphs. 8 sentences per paragraph.

Basically, write the damage and effect the Tri-State tornado had on the environment in 2 paragraphs (each paragraph has 8 sentences)

Answers

The Tri-State Tornado was one of the deadliest tornadoes in US history, wreaking havoc across parts of Missouri, Illinois, and Indiana on March 18, 1925. The tornado caused widespread destruction and loss of life, with over 600 people killed and more than 2,000 injured. The environmental impact of the Tri-State Tornado was significant, with damage to homes, buildings, and infrastructure. The tornado also caused damage to agricultural land, forests, and wildlife.

What is a Tri-Sate tornado?

Generally,  The tornado destroyed homes, buildings, and infrastructure, leaving behind a trail of destruction that extended for over 200 miles. In Murphysboro, Illinois, the tornado damaged or destroyed more than 1,000 homes, leaving thousands of people homeless. The tornado also destroyed schools, churches, and businesses, further compounding the devastation. The loss of infrastructure had a significant impact on the affected communities, making it difficult for emergency responders to reach those in need and for residents to receive essential services. In addition to the human toll, the Tri-State Tornado caused extensive damage to agricultural land, uprooting trees and destroying crops. The tornado also caused significant damage to forests, killing trees and disrupting ecosystems. The impact on wildlife was also severe, with many animals killed or displaced by the storm. The long-term environmental impact of the tornado was felt for years after the event, as communities struggled to recover and rebuild.

The Tri-State Tornado was a devastating event that had a profound impact on the environment. The damage to homes, buildings, and infrastructure was extensive, leaving communities struggling to recover. The impact on agricultural land, forests, and wildlife was also significant, disrupting ecosystems and causing long-term damage. Despite the challenges faced by those affected by the tornado, communities came together to rebuild and support one another, demonstrating the resilience and strength of the human spirit in the face of adversity.

Read more about Tri-Sate tornado

https://brainly.com/question/2439538

#SPJ1

The series of processes which rock forms, changes from one type to another, is destroyed and forms again by geological processes?

Answers

The rock cycle is a series of processes that involve the formation, transformation, destruction, and reformation of rocks. These processes are influenced by various geological activities.

The formation and transformation of rocks is a continuous process that occurs over millions of years due to various geological processes.

The rock cycle is a continuous process that involves three major types of rocks: igneous, sedimentary, and metamorphic rocks. The cycle begins with the formation of magma or lava, which cools and solidifies to form igneous rocks. These rocks can be further transformed into sedimentary rocks through weathering, erosion, and deposition of sediments. Sedimentary rocks can then be transformed into metamorphic rocks through heat and pressure.

Metamorphic rocks can be transformed back into igneous rocks through melting and cooling, completing the cycle. The cycle continues as rocks are destroyed through weathering and erosion, and new rocks are formed from the resulting sediments.

For more such questions on Soil

https://brainly.com/question/1321904

#SPJ4

From this cross section of the Grand Canyon, what are the oldest rocks or structures?

Answers

Grand Canyon has rocks of granite and Precambrian metamorphic rocks. The Grand Canyon is created by the Colorado River in Arizona.

More details about the topography of the Grand Canyon are mentioned below:

One of the six main physiographic divisions of the Colorado Plateau province, the Grand Canyon is a river valley in the Colorado Plateau that exposes elevated Proterozoic and Paleozoic strata. Although the Grand Canyon is not the deepest canyon in the world (the deeper canyon is the Kali Gandaki Gorge in Nepal), it is renowned for its enormous size and its intricate and vibrant environment. Its thick succession of old rocks, which are well preserved and exposed in the canyon walls, makes it notable from a geological perspective. A large portion of the early geologic history of the continent of North America is preserved in these rock layers.

To know more about Grand Canyon here

https://brainly.com/question/2143035

#SPJ4

Horses originated during the Eocene period 50 million years ago in Europe, Asia, and North America, at a time when South America was separated by sea. What might be one explanation for how scientists are finding horse fossils in South America?

Answers

One explanation for how scientists are finding horse fossils in South America is that the continents of South America and North America were connected by land bridges during the Pleistocene period (1.8 million to 11,000 years ago).

What is Pleistocene period?

The Pleistocene period is a geological epoch that lasted from approximately 2.588 million to 11,700 years ago. It is the most recent and longest of the three epochs of the Quaternary period, followed by the Holocene and preceding the Pliocene. During this period, the Earth’s climate transitioned from the warmer Pliocene to the colder Pleistocene, with the start of the Quaternary glaciation.

During this time, horses could have migrated from North America to South America, leaving behind fossils in the process. This land bridge eventually disappeared due to rising sea levels, which is why horses are not found in South America today.

To learn more about Pleistocene period

https://brainly.in/question/13479579

#SPJ1

what line of latitude would you have to go to in order to see the sun directly overhead on the march equinox?

Answers

On the March equinox, which occurs around March 20th, the sun is directly overhead at the equator.

A line of latitude is a geographic coordinate that runs east-west around the Earth, and it specifies the north-south position of a point relative to the equator, which is defined as 0° latitude. The equator is the line of latitude that is located exactly halfway between the North Pole and the South Pole, at 0° latitude.

So, to see the sun directly overhead on the March equinox, you would have to go to the equator, which is at 0° latitude. This is because on this day, the sun's rays shine directly on the equator, making it possible to see the sun exactly overhead at noon local time.

It's important to note that the sun is not directly overhead at the equator on any other day of the year. On other days, it is either north or south of the equator, so its position in the sky changes throughout the day.

You can read more about latitudes at https://brainly.com/question/1939015#:

#SPJ4

Which type of map shows average weather and rain of a region?
• physical map
• topographic map
• climate map
• road map​

Answers

Climate map

not being rude but shouldn't you know that?

just curious

C

climatic map, chart that shows the geographic distribution of the monthly or annual average values of climatic variables—i.e., temperature, precipitation, relative humidity, percentage of possible sunshine, insolation, cloud cover, wind speed and direction, and atmospheric pressure over regions ranging in area from a few tens of square kilometres to global.

which type of seismic wave causes the most damage?

Answers

Surface Waves are the seismic waves that causes the most damage. Surface waves are typically lower frequency than body waves and move through Earth's surface material more slowly.

On a seismogram, they may be easily differentiated. Deeper earthquakes result in weaker surface waves, which are stronger as the earthquake depth increases.

Rayleigh waves, which feature rock particle motions that are strikingly comparable to the motions of water particles in ocean waves, and Love waves, which are shear waves trapped near the surface, are the two main types of surface waves.

To know more about Earthquake, click here:

https://brainly.com/question/9415516

#SPJ4

Overall, this type of seismic wave is the most destructive. A)P wave B)S wave C) surface wave D) tsunami

Answers

The surface wave is often the seismic wave type that does the most damage. Thus option C is the correct answer.

The biggest amplitude seismic waves are surface waves, which are also the slowest seismic waves. The strongest ground trembling can be produced by these waves as they travel along the Earth's surface; hence, buildings and other structures may sustain substantial damage.

P and S waves, on the other hand, are body waves that move through the interior of the Earth. P waves can move through solid, liquid, and gaseous objects and are quicker than S waves. S waves can only pass through solid objects and are slower than P waves.

Although P and S waves are equally capable of causing harm, their destructive potential is often lower than that of surface waves.

To learn more about Surface waves,

https://brainly.com/question/16948312

#SPJ4

What can a geologist understand by studying the fossil composition of sedimentary rocks?
answer choices
how animals built their shelters
how life forms evolved over time
how some extinct animals preyed on others for food
how land animals used rocks as habitats

Answers

A geologist can understand by studying the fossil composition of sedimentary rocks by how life forms evolved over time. The correct answer is B.

A geologist can comprehend the evolution of life forms over time by examining the fossil content of sedimentary rocks. An expert in the processes that shape the solid, liquid, and gaseous components that make up Earth and other terrestrial planets is known as a geologist.

Although knowledge in physics, chemistry, biology, or other sciences is also beneficial, geologists typically major in geology, earth science, or geophysics.

While lab and computer work is a part of many geological subdisciplines, field research (or "field work") is an essential component of the subject. Geologists are included in the broader category of scientists referred to as "geoscientists."

Geologists search for natural resources like oil, gas, and precious and basic metals in the mining and energy sectors.

Learn more about the geologist:

brainly.com/question/1490622

#SPJ4

Who did the cpr cir syndicate/federal govt. bring to work on railway construction in BC??

Answers

During the construction of the Canadian Pacific Railway (CPR) in British Columbia (BC), the CPR syndicate and the federal government brought in thousands of Chinese workers to help build the railway.

Why Canadian Pacific Railway is famous?

Canadian Pacific Railway was founded in 1881 to physically unite Canada and Canadians from coast to coast, and its construction is regarded as one of Canada's greatest engineering feats.

The Chinese workers were recruited primarily from the Guangdong province in southern China and were brought over to Canada as contract laborers. They were promised steady work, good wages, and the opportunity to eventually bring their families over to Canada. However, the reality of their working conditions was often far from these promises.

Learn more about Canadian Pacific Railway here:

https://brainly.com/question/904179

#SPJ1

A rectangle has sides of 2.5 and 4 what is the perimeter?

Answers

13
Perimeter is addition, you add up all of the sides together. Since a rectangle has 4 sides, you add 2.5 to itself and 4 to itself, then add them together.

Answer:

6.5

Explanation:

what is the name of the famous geyser in yellowstone national park?

Answers

The name of the famous geyser in Yellowstone National Park is "Old Faithful".

It is known for its spectacular, predictable eruptions, which happen approximately every 90 minutes. Old Faithful was named by explorers in the early 1800s who observed the geyser's reliable and frequent eruptions.

The eruptions can shoot hot water and steam up to 185 feet high and can last from 1.5 to 5 minutes. The geyser is located in the Upper Geyser Basin of the park, which is also home to many other geysers and hot springs.

Old Faithful is one of the most popular attractions in Yellowstone National Park and draws millions of visitors each year who come to witness its impressive eruptions and the natural beauty of the surrounding landscape.

For more questions like National Park click the link below:

https://brainly.com/question/15319397

#SPJ4

What does a finely crystalline or glassy igneous texture indicate in geology?
Igneous rocks are rocks formed when magma, which is a molten liquid rock, cools and solidifies. Some types of igneous rock have a very fine crystalline texture, and some are so smooth that they closely resemble glass.

Answers

A finely crystalline or glassy igneous texture indicate that rocks have a very fine-grained or even glassy appearance since mineral crystals don't have much time to develop.

Since the crystals are too small to view without a magnifying glass, igneous rocks that are formed on the surface of the earth have a highly fine-grained texture. Igneous rocks with Phanteric Texture have massive, obvious crystals because they evolved gradually in an underground magma chamber.

Rock that results from a slow cooling of magma deep under the crust is referred to as intrusive or plutonic rock. Because of the long cooling process, the intrusive igneous rock has a phaneritic or coarse-grained texture.

To know more about geology visit :

https://brainly.com/question/7978853

#SPJ4

Correct question is :

What does a finely crystalline or glassy igneous texture indicate in geology ?

lesley head argues that ___and climate change are inextricably entwined.

Answers

Lesley Head argues that human values and climate change are inextricably entwined.

Human values play a significant role in shaping our attitudes towards the environment, and ultimately our behavior. Our values inform our decisions, both as individuals and as societies, and influence the types of policies we support or reject.

Climate change, on the other hand, is a complex and multi-faceted problem that is largely caused by human activities. Therefore, understanding the relationship between human values and climate change is crucial in addressing this issue.

By recognizing the connections between our values, behaviors, and climate change, we can begin to develop more effective solutions that take into account the social, economic, and cultural factors that contribute to this global challenge.

To learn more about climate change visit: https://brainly.com/question/1789619

#SPJ4

You are dating rocks by their proportions of parent isotope potassium-40 (half-life 1.25 billion years) and daughter isotope argon-40.Part A: Find the age of a rock that contains equal amounts of potassium-40 and argon-40.Part B: Find the age for a rock that contains three times as much argon-40 as potassium-40.

Answers

Part A: If a rock contains equal amounts of potassium-40 and argon-40, it means that half of the potassium-40 has undergone decay into argon-40. The half-life of potassium-40 is 1.25 billion years, so the age of the rock would be 1.25 billion years.

Part B: If a rock contains three times as much argon-40 as potassium-40, it means that 75% of the potassium-40 has undergone decay into argon-40. To find the age of the rock, we can use the equation:

Age = t * ln(P0/P) / ln2

Where t is the half-life of potassium-40 (1.25 billion years), P0 is the initial amount of potassium-40, P is the remaining amount of potassium-40, and ln is the natural logarithm function.

Solving for Age, we get:

Age = 1.25 billion years * ln(1 / (1/3)) / ln2 = 1.25 billion years * ln3 / ln2 = 1.25 billion years * 1.09861228867 / 0.6931471805599453 = 1.80 billion years

What is an isotope?

An isotope is a variant of an element that has the same number of protons in its nucleus, but a different number of neutrons. As a result, isotopes of an element have the same chemical properties, but different atomic masses.

Isotopes can be either stable (not undergoing radioactive decay) or unstable (undergoing radioactive decay). Unstable isotopes, also known as radioactive isotopes, emit particles and radiation, transforming into other elements over time.

Hence, the answer is,

PART A: The half-life of potassium-40 is 1.25 billion years, so the age of the rock would be 1.25 billion years.

PART B: the answer is, the age of the rock containing three times as much argon-40 as potassium-40 would be approximately 1.80 billion years.

To learn more about isotopes, follow the link:

https://brainly.com/question/12955625

#SPJ4

How do spiral and elliptical galaxies differ in terms of the presence or absence of disk and halo components.

Answers

Spiral and elliptical galaxies differ primarily in their shapes and structures; spiral galaxies have a flattened disc component and a more noticeable halo, whereas elliptical galaxies lack a disc and have a smoother, more rounded structure.

The majority of the galaxy's stars, gas, and dust are found in the flattened disc component of spiral galaxies, which also has a noticeable central bulge. The disc is frequently arranged into spiral arms, which are ring-shaped regions of the galaxy's core where star formation is more active and dust concentration is higher. A longer, spherical or elliptical halo component, which is surrounded by the disc and bulge and contains older stars, globular clusters, and dark matter, is also present in spiral galaxies.

The disc component is absent from elliptical galaxies, on the other hand. As opposed to this, they are distinguished by a uniform, nearly spherical distribution of stars in a variety of sizes and forms. Elliptical galaxies also include a halo component, but it is less noticeable and frequently more elongated in shape than it is in spiral galaxies.

To know more about elliptical galaxies

brainly.com/question/24985948

#SPJ4

Square STUV circumscribes circle W. Find the area of the shaded region. Round your answer to the nearest tenth if necessary.

Answers

Without a diagram or specific measurements, it's hard to provide an exact answer. However, here's a general method to approach this problem .

What is Square STUV circumscribes circle W ?

Draw a diagram of the situation. Label the square STUV and the circle W. Make sure you understand the relationship between the square and the circle (i.e., the circle is circumscribed by the square, meaning that the square encloses the circle and each corner of the square touches the circle).

Identify the shaded region. Usually, in problems like this, the shaded region is the area that is inside the square but outside the circle.

Find the area of the square. If you know the length of one side of the square, you can find its area by squaring that length. If you don't know the length, you may need to use other information given in the problem to find it.

Find the area of the circle. If you know the radius of the circle, you can find its area using the formula A = πr^2. If you don't know the radius, you may need to use other information given in the problem to find it.

Subtract the area of the circle from the area of the square. This will give you the area of the shaded region.

Round your answer to the nearest tenth if necessary.

Note: Depending on the specific measurements given in the problem, there may be alternative methods to solve this problem .

Learn more about Square STUV here

https://brainly.com/question/27426254

#SPJ1

Other Questions
Question content area topPart 1The brain volumes (cm3) of 50 brains vary from a low of 904 cm3 to a high of 1488 cm3. Use the range rule of thumb to estimate the standard deviation s and compare the result to the exact standard deviation of 156.9 cm3, assuming the estimate is accurate if it is within 15 cm3.Question content area bottomPart 1The estimated standard deviation is enter your response here cm3.(Type an integer or a decimal. Do not round.) explain about ut austin course schedule how to convert Hz to rad/s? How Much Does a Fuel Injector Replacement Cost? A trip to Washington from Boston will take you 5 3/4 hours. If you have traveled 1/3 of the way how much longer will the trip take 1. Necessary and Probabilistic Reasoning - Deduction and InductionEvery argument may be classified as either deductive or inductive. The difference between these two categories of arguments has to do with the strength of the argument's inferential claim. In a deductive argument, the conclusion is claimed to follow from the premises by necessity. This means that if a deductive argument is a good one, it is impossible for the conclusion to be false when the premises are all true. By contrast, an inductive argument involves probabilistic reasoning. In an inductive argument, the conclusion is claimed to be only probably true given the premises. This means that if an inductive argument is a good one, then when the premises are all true, the conclusion is probably also true (but not definitely).Consider the following arguments. Each argument is either a deductive argument or an inductive argument. For each argument, indicate whether the conclusion follows from the premises by necessity or by probability and whether the argument is deductive or inductive.Argument AThis morning I discovered a ring-shaped coffee stain on my desk. Therefore, it can be concluded that someone left a cup of coffee on my desk overnight.In Argument A, the conclusion follows by _______ (necessity/probability) , so the argument is ______ (inductive/deductive)Argument BIf today is Saturday, then tomorrow is Sunday. But if tomorrow is Sunday, then the day after tomorrow is Monday. Therefore, if today is Saturday, then the day after tomorrow is Monday.In Argument B, the conclusion follows by _______ (necessity/probability) , so the argument is ______ (inductive/deductive)Argument CIf this winter had been exceptionally cold, then my rose garden would have died from frost. Since my rose garden did not die from frost, it follows that this winter was not exceptionally cold.In Argument C, the conclusion follows by _______ (necessity/probability) , so the argument is ______ (inductive/deductive)Argument DAfter carefully considering relevant factors such as supply and demand, pricing analysts issued a statement Tuesday predicting that gasoline prices would rise steadily over the next few months. Based on the expertise of the pricing analysts, we can assume that gasoline prices will show the predicted uptrend.In Argument A, the conclusion follows by _______ (necessity/probability) , so the argument is ______ (inductive/deductive) Why is it called Killer Angels? NO 0.210.340.45O 0.555Mark this and return678For students majoring in Hospitality Management, it was determined that 5% have visited 1-10 states, 16% havevisited 11-20 states, 45% have visited 21-30 states, 19% have visited 31-40 states, and 15% have visited 41-50states. Suppose a Hospitality Management student is picked at random. What is the probability that the student hasnot visited between 21 and 30 states?10Save and ExitextSubmit now, in a pargraph, describe how imperialism ,colonialism and mercantilism are related What is Danny saying in The Shining? azulene and naphthalene (below) are cyclic, conjugated constitutional isomers with very different properties. naphthalene is colorless with no net dipole, while azulene is a bright blue compound with a very strong dipole. explain why the electronic properties of these molecules are so different. (this will require at least one resonance structure). "Discuss the implications of the Turing Test for artificial intelligence. In what ways does the test succeed or fall short in evaluating the true intelligence of a machine?"Brainiest answer Find a particular solution y, of the following equation using the Method of Undetermined Coefficients. Primes denote the derivatives with respect to x. y'' + 17y=3e^8xA particular solution is y,(x) = where is allen community college What is the main theme of The Story of an Hour *? the sales projections for travel-space trailers appear to be valid and reasonable. the company has researched the market and has determined the potential demand for their products. the demand for travel-space trailers company products is high. the company has a good reputation and their products are well-made. the market for their products is good, and they have a lot of repeat customers. according to fessler a solid that forms and settles out of a liquid mixture Sanjay stacks three boxes in a pile. The heights of the boxes are 25cm 36cm and 47cm. They are all measured correct to the nearest centimetre. What is the greatest possible height of the stack of the three boxes? -3.5 (2 1.5n) 4.5na. -7 6nb. -7 + 0.75nc. -7 9.75nd. -7 9.5n Which of the following correctly shows the iteration of an ascending sort (from left to right) using the selection sort algorithm on an array with the following elements: {10, 6, 3, 2, 8} Select one: a. {2, 6, 3, 10, 8), (2, 3, 6, 10, 8), (2, 3, 6, 10, 8), 2, 3, 6, 8, 10) C b. {6, 10, 3, 2, 8}, {3, 6, 10, 2, 8}, {2, 3, 6, 8, 10) c. {2, 6, 3, 10, 8}, {2, 3, 6, 10, 8}, {2, 3, 6, 8, 10} d. {6, 10, 3, 2, 3, (3, 6, 10, 2, 8}, {2, 3, 6, 10, 8}, {2, 3, 6, 8, 10} 2 o