Answers
Answer:
Synthetic slings are lifting slings made from a synthetic material, such as nylon or polyester. they are very flexible like chains are. they are strong like chains, but, they're made from a very strong Kevlar-like material. Do not allow nylon and polyester slings to be used in contact with objects or at temperatures in excess of 194 degrees F (90 degrees C), or below minus 40 degrees F (minus 40 degrees C). Long-term exposure to sunlight or ultraviolet radiation can affect the strength of synthetic webbing slings.
Explanation:
The true statement concerning synthetic slings is: C. they are flexible and mold themselves to the load.
What is a synthetic sling?A synthetic sling is also referred to as a synthetic lifting strap or synthetic rigging sling and it can be defined as a tool covered with a protective jacket and made from a synthetic material such as polyester or nylon.
This ultimately implies that, a synthetic sling is designed and developed for lifting loads because it is flexible and has a lightweight.
Read more on synthetic sling here: https://brainly.com/question/8983894
Related Questions
any unblocked video sights for school ?
Answers
Answer:
I'm not sure what you mean
Explanation:
I left my leveno computer on my bed and didn’t touch for a while mind you it was working but then I came back and it was closed and the screen was black even if like it would open and I think that’s because I dropped my phone on the F11 button and I didn’t know what it did and now
It still has the time screen and then you press it and it go back to like a light up black screen pls help me I have school at 9:30
Answers
Answer:
Try restarting your computer this would typically be pressing the power button for about 15 seconds. Pressing f11 shouldnt have done anything because that is typically used to make something fullscreen
Explanation:
a digital multimeter is set to read dc volts on the 4 volt scale the meter leads are connected to a 12 volt battery what will the display read
Answers
Answer: The answer
The answer is D. 0.012 V
Explanation:
0.012 V will the display read, as a digital multimeter is set to read DC volts on the 4 volt scale the meter leads are connected to a 12 volt battery.
What is digital multimeter?Voltage, current, and resistance are just a few of the electrical stimuli that a digital multimeter, or DMM, measures and verifies.
It combines the functions of a voltmeter, an ammeter, and an ohmmeter and is common diagnostic equipment used by technicians and electrical engineers.
Thus, it is 0.012 V
For more details about digital multimeter, click here:
https://brainly.com/question/5135212
#SPJ2
Humans do not appear to be a large collection of cells. What might a student do to see that humans are made up of cells?
Answers
Answer:
First thing, this is not engineering and second, you gotta use a microscope
Explanation:
Which statistical process control (SPC) tool is described in these sentences?
is a statistical process control (SPC) tool that helps identify the causes of a particular problem. is a SPC tool that helps to visualize the steps in a process and identify gaps in the process.
Answers
Answer:
is a SPC tool that helps to visualize the steps in a process and identify gaps in the process.
yooo. does anyone have tin foil and tape mask that they can take a picture of and send it ?
Answers
Answer:
broooo what are u trying to do ?
Explanation:
lol u didn't go to the store and get ur supplies
Which of the following fraction pair are equivalent fractions a. 1/4 and 1/2 b 1/4 and 3/4 c 1/4 And 4/12 d and 8/32
Answers
Answer:
and what is the pair to 8/32 ????
Explanation:
1/4 and 1/2 aren't equivilant cause when you divide or multiply 1/4 you don't get 1/2.
1/4 and 3/4 aren't equivilant eithier
4/12 = 1/3 not 1/4
and what is the pair to 8/32
8/32 = 4/16 = 1/4
2. The unthreaded part of a bolt or screw is called the
Answers
Answer:
The grip
Explanation:
the head of all headed bolt (except countersunk head bolt)
plssssssssssssssssss help
Answers
Answer:
with what exactly? define " please, help "
with what love? you have no question on here and there isn't any attachments. I'd love to help but i don't know how
Technician A says that synthetic blend oil has the same service life as that of full synthetic oils. Technician B says that conventional oils have a shorter service life than that of synthetic oils. Who is correct
Answers
Answer:
In this case, both technicians are correct because conventional oil wont last as long as full-synthetic or full-synthetic high-mileage oil. high-mileage or regular full-synthetic? I say go with the full-synthetic high-mileage oil because it can handle more miles than the regular low-mileage oil. it also wont damage ur motor unless ur motor requires low-mileage oil.
Explanation:
if this is that and that is this then this is that
Answers
Answer:
that is this so that is this
Explanation:
What apps work the best on mac book airs
Answers
Answer: Amphetamine. Get it from: App Store. ...
HyperDock. Get it from: App Store. ...
Parallels Desktop 13. Get it from: Parallels. ...
Duet. Get it from: App Store. ...
Atom. Get it from: Atom. ...
Logic Pro X. Get it from: App Store. ...
Microsoft To Do. Get it from: App Store
Explanation: Have a blessed and good day hopefully this helped!
You are a historian who is compiling information on the changing materials used in a product in one of the categories listed below. Choose a product that uses a variety of materials that have been discussed in this lesson (for example, a car or a tennis racket). Using online or library resources, research past materials used to create the product. Be sure to discuss the materials currently being used for the design and include information on the sustainability of these resources. Your research must also explain why the materials changes were made (for example, safety, cost, or weight). Keep track of your references so that you can document all of the resources used for your report.
Answers
Answer:
look on line ok
Explanation:
What types of engineers would be most likely to work on the project described in the following scenario?
A small town in Massachusetts received a government grant for developing a series of bicycle trails through a salt marsh.
A.)a construction engineer, an environmental engineer, and a structural engineer
B.)an environmental engineer, a structural engineer, and a transportation engineer
C.)an environmental engineer, a transportation engineer, and a water resource engineer
D.)an environmental engineer, a structural engineer, and a transportation engineer
Answers
Answer:
I believe that it is option c.
what do you guys like in engineering
Answers
Answer:
You create and work with others. Also you build and innovate. It a fun job but does require lots of trial and error. There is some math involved but you need mah for lots of jobs. Also, the amount of school needed its not a lot compared to the pay you can get. I think that it fun and puts your mind to work
Explanation:
Answer:
You get to change the world. ...
It's incredibly challenging and rewarding. ...
You get to solve problems and be creative. ...
No two projects are usually completely the same. ...
You will always have opportunities to learn new things. ...
Engineering careers are pretty flexible.
Explanation:
What parts does the block contain?
Answers
Answer:
Cylinder blocks.
Cylinder liners.
Coolant passages.
Oil passages.
Crankcase.
Integrated crankcase.
Integrated cylinder head.
Integrated transmission.
Explanation:
You had a lot of crooks try to steal your heart lyrics.
Answers
Answer: How to Love by Lil Wayne
Explanation:
Florida law requires that you give bicyclists a minimum of
clearance.
of
A. six inches
B. two feet
C. three feet
D. four feet
Answers
Answer:
C
Explanation:
Florida law requires that motorists give cyclists a minimum of three feet of clearance and reduce their speed.On a two lane road, pass a bicyclist like a slow moving vehicle, and only when it is safe to do so.If I took the number 2 and put another one but the opposite way to the left of it what shape would it make?
Answer: FISH
Answers
Answer: heh, the answer is fish.
Explanation:
Your welcome.
Explain the difference between open coated paper and closed coated paper.
**It can be just 2-3 sentences.
Answers
Answer:
open coated paper abrasives are better for sanding softer materials like cedar, pine aluminum and brass. closed coated paper abrasives are better suited to sand harder materials like oak, hickory,and stell
Explanation:
Sana po makatulong yan Lang po kasi ang Alam ko e. Pa brainlist po pa follow na rin
Answer: Open-coated sandpaper has abrasive grains covering about 70 percent of its surface. This works well with power tools and soft woods such as pine. Close-coated sandpaper is completely covered with abrasive material. It's more suitable for hand-sanding or with hardwood and metal surfaces.
Explanation: Hope I helped you sir!
What is something that a robot or computer program might do that requires a decision, or conditional statement?
Answers
Answer:
Make decisions such as greeting a user depending on the time of day. Example: saying good morning while it is morning but saying good afternoon to the user only when it is the appropriate time.
Explanation:
I have used decision making methods in various programs to greet users, and determine whether to do one thing or another based on values passed to the program
If you have any questions feel free to ask me and I will do my best to help and explain! :)
ways to increase the efficiency of energy use
Answers
Explanation:
use
ball bearings
grease
oil
7
Select the correct answer.
Which is most likely to assist engineers and architects?
O A. Drafters.
OB.
Technicians.
O c. Archivists.
OD. Carpenters.
Reset
Next
Answers
Answer:
Drafters
Explanation:
I believe this is the answer because I took a test on it and got it right
Which type of hitch consists of two or more vertical hitches attached to the same hook, and allows the slings to be connected to the same load without the use of a
spreader beam?
Answers
A type of hitch that consists of two or more vertical hitches attached to the same hook is: B. Bridle hitch.
What is a hitch?A hitch can be defined as a device that comprises a knot that is typically used for connecting an object (load) to another.
In Engineering, there are different types of hitch and these include the following:
Basket hitchBridle hitchBlock-and-tackle hitchDouble-leg chain hitchIn conclusion, a bridle hitch is a type of hitch that consists of two or more vertical hitches attached to the same hook, and allows the slings to be connected to the same load without the use of a spreader beam.
Read more on hitches here: https://brainly.com/question/4119773
How old must you be to operate a forklift
Answers
give the meaning of the following words in your notebook pyrography , staining , painting
Answers
- staining: The application of a stain.
- painting: a painting product in particular: a work created through the art of painting
I hope this helps you
:)
Which of the following tools might civil engineers use when designing roads in a recently constructed industrial park?
A.)theodolite
B.)altimeter
C.)planimeter
D.)Gunter’s chain
I put planimeter but I want to make sure before I turn it in.
Answers
Answer:D. Gunter's Chain
Explanation:I know this because a gunter's chain is used for plots of land to be accurately surveyed and plotted, for legal and commercial purposes.
if the mine winch drum diameter is 6 m, calculate how far the cage will drop for each single rotation of the drum
Answers
Answer:
The depth to which the cage will drop for each single rotation of the drum is approximately 18.85 m.
Explanation:
The mine winch drum consists of a drum around around which the haulage rope is attached
Therefore, given that the diameter of the winch drum = 6 m
The length of rope unwound by each rotation = How far the cage will drop for each single rotation of the drum
The length of the rope unwound by each rotation = The rope that goes round the circumference of the winch drum, once
∴ Since the rope that goes round the circumference of the winch drum, once = The circumference of the winch drum, we have;
The length of the rope unwound by each rotation = The circumference of the winch drum = π × The diameter of the winch drum
The length of the rope unwound by each rotation = π × 6 m = 6·π m
The length of rope unwound by each rotation = How far the cage will drop for each single rotation of the drum = 6·π m
How far the cage will drop for each single rotation of the drum = 6·π m ≈ 18.85 m
The depth to which the cage will drop for each single rotation of the drum ≈ 18.85 m.
2. Identify the structural members specified in the drawings below.
A
В.
С.
Subfloor
D.
E.
F.
Answers
Answer:
where is the drawing bro
Examine the chart below, which compares the prices of three different items to the quantities supplied at each price:
Name and define the economic concept being illustrated. Then analyze the chart’s information, and state which item is a) elastic; b) inelastic, or; c) unit elastic, and tell why.
Answers
Answer:
a) Item #1
b) Item #3
c) Item #2
Explanation:
From the given chart, we have;
Item #1 is elastic
The percentage change in price results in a larger percentage change in quantity supplied as follows;
The percentage change in price from $1.00 to $2.00 is 100% change (increase) while the corresponding percentage change for the quantity supplied from 10 to 25 in 150% change (increase)
Therefore, a percentage change in price results in a higher percentage change in quantity supplied, and the supply is said to be elastic ([tex]E_S > 1[/tex])
Item #2 is Unit elastic
The percentage change in price results in an equal percentage change in quantity supplied and the supply is therefore unit elastic
The percentage change in price from $1.00 to $2.00 is 100% change (increase) while the corresponding percentage change for the quantity supplied from 10 to 20 in 100% change (increase)
Therefore, a percentage change in price results in an equal percentage change in quantity supplied, and the supply is said to be unit elastic ([tex]E_S = 1[/tex])
Item #3 is inelastic
The percentage change in price results in an lesser percentage change in quantity supplied and the supply is therefore inelastic
The percentage change in price from $1.00 to $2.00 is 100% change (increase) while the corresponding percentage change for the quantity supplied from 10 to 15 in 50% change (increase)
Therefore, a percentage change in price results in an lesser percentage change in quantity supplied, and the supply is said to be inelastic ([tex]E_S < 1[/tex]).