what temperature does water freeze when thrown in air

The Richter scale measures the magnitude of an earthquake, which is a measure of the energy released by the seismic waves generated by the earthquake.

Measures are the steps taken to achieve a desired outcome. They can be in the form of legislation, policies, regulations, practices, procedures, and processes. They are used to implement and enforce objectives, goals, and strategies, and can be both proactive and reactive. Measures can be utilized by governments, businesses, and individuals to ensure desired outcomes are achieved in a timely and cost-effective manner. Measures can also be used to monitor progress and evaluate the effectiveness of policies and procedures.

To learn more about measures

https://brainly.com/question/28827992

#SPJ4

Answer:

I = M L^2      description of moment of inertia I

Only (B) and (C) are useful because L is very small along the length

(C)  has the largest momejnt:

    I = M L^2 / 3 for a thin rod about one end

(I = M L^2 / 12 for a rod about its midpoint)

The larger magnitude of current, I1, is 20.0 µT / B2.

What is magnitude of a current?

The magnitude of a current refers to the size or strength of an electric current, typically measured in amperes (A). An electric current is the flow of electric charge through a conductor, such as a wire. The magnitude of a current is a measure of the rate at which charge is flowing through the conductor.

Let's call the larger current I1 and the smaller current I2, where I1 = 4I2.

The magnitude of the magnetic field at a point in the plane of the wires and 10 cm from each wire is 5.0 µT.

According to Ampere's law, the magnetic field created by a current-carrying wire is proportional to the current in the wire. So, if two parallel wires are carrying unequal currents, the wire carrying the larger current will create a stronger magnetic field.

Since the magnitude of the magnetic field at the given point is 5.0 µT, we can use this information to find the larger of the two currents, I1.

From Ampere's law, the magnetic field at a point is proportional to the current in the wire, so we can write:

B1 * I1 = B2 * I2

Where B1 is the magnetic field created by I1, and B2 is the magnetic field created by I2.

Since the magnitude of the magnetic field at the point is 5.0 µT, we can write:

B1 * I1 = 5.0 µT

B2 * I2 = 5.0 µT

Using the relationship between the two currents, I1 = 4I2, we can substitute I2 in the second equation:

B2 * 4I2 = 5.0 µT

Solving for I2:

I2 = 5.0 µT / (4 * B2)

And then solving for I1:

I1 = 4 * I2 = 4 * (5.0 µT / (4 * B2)) = 20.0 µT / B2

So the larger magnitude of current, I1, is 20.0 µT / B2.

To learn more about magnitude of current:

https://brainly.com/question/29658586

#SPJ4

When you increase the driving frequency of a wave on the string, the wavelength will decrease.

When you increase the driving frequency of a wave on a string, the wavelength of the wave will decrease. This is because the speed of the wave on the string is constant, so as the frequency increases, the wave must travel a shorter distance in one period. The wavelength is the distance between two consecutive points on the wave that are in phase (i.e. have the same displacement and velocity), so as the wave must travel a shorter distance in one period, the distance between two consecutive points on the wave that are in phase (i.e. the wavelength) will decrease.

Therefore, the correct answer is: Decrease.

To know more about frequency please refer: https://brainly.com/question/30333783

#SPJ4

1.61 Blokz high index lenses are a specific type of high index lens that is designed to block out harmful blue light from digital screens.

High index lenses are a type of prescription eyeglass lens that is made of a special type of plastic that is thinner and lighter than traditional plastic lenses. The term "high index" refers to the refractive index of the lens material, which is a measure of how efficiently it bends light. The higher the index, the thinner and lighter the lens can be.

1.61 Blokz, lenses have a refractive index of 1.61, which means they are thinner and lighter than traditional plastic lenses, and they also have a special coating that helps to filter out blue light. This can help to reduce eye strain and discomfort when using digital devices for extended periods of time.

To know more about high index lens here:

https://brainly.com/question/14126835#

#SPJ11

The car travels a distance of 209.7 kilometers in 2 hours 20 minutes at a speed of 90 km/h.

To calculate the distance traveled by the car, we can use the formula:

distance = speed x time

where;

First, we need to convert 2 hours 20 minutes to hours. We can do this by dividing the number of minutes by 60 and adding the result to the number of hours.

2 hours 20 minutes = 2 + 20/60 = 2.33 hours

Now we can substitute the values into the formula and solve the distance traveled by the car:

distance = speed x time

distance = 90 km/h x 2.33 h

distance = 209.7 km

Learn more about distance traveled here: https://brainly.com/question/2854969

#SPJ1

Answer:

1. The image in the plane mirror appears to be identical to the candle, but reversed from left to right.

2. The size of the image in the plane mirror will be the same as the size of the object (candle).

3. Reflection is the bouncing back of light rays when they encounter a surface, such as a mirror or any other shiny object.

4. The distance between the candle and its image in the plane mirror will remain the same, which is 3 meters.

A preferred 2-liter bottle contains 67.6 fluid ounces. of liquid. Assuming which you're using 8-ounce cups, you could have 8.45 glasses of a few issue liquid is inside the 2-liter bottle.

An ounce is a unit of measurement commonly used for weighing small amounts of mass or weight. It is equivalent to 28.35 grams or 1/16th of a pound. Ounces are commonly used to weigh food items, such as fruits, vegetables, and meats, as well as precious metals like gold and silver.

In the United States, ounces are also used to measure liquid volume, with one fluid ounce equaling approximately 30 milliliters. Ounces are divided into different types, including avoirdupois ounces and troy ounces. Avoirdupois ounces are used to measure most common items, while troy ounces are primarily used for precious metals like gold and silver.

To learn more about Ounce visit here:

brainly.com/question/29374025

#SPJ4

Complete question: -

How many oz does a 2 liter bottle hold?

You can calculate thermal conductivity by relating heat flux with it and using the formula:  q = -λΔT/Δx.

Heat flux is the amount of heat energy transferred over an area per second, while thermal conductivity is the ability of a given material to conduct or transfer heat through it. Once the heat flux is known, you can easily calculate the thermal conductivity of a material. The two can be related as:

q = -λΔT/Δx, where:

q is the heat flux, λ is the thermal conductivity, ΔT is the temperature difference across the material, and Δx is the distance travelled by heat.

Thermal conductivity of an object can also be illustrated as:

λ = (QL)/(AΔT), where:

λ is the thermal conductivity, A is the area of the surface, Q is the amount of heat transferred, L is the distance between two isothermal planes, and ΔT is the change in temperature.

To know more about thermal conductivity, refer:

https://brainly.com/question/16229844

#SPJ4

Storage that is wiped clean when power is cut off from a device is known as Volatile memory. The correct answer A.

Volatile memory is a type of data storage that is wiped clean when power is cut off from a device. This type of memory is used in computers, servers, and other electronic devices to store data that needs to be accessed quickly or that needs to be retrieved quickly when power is cut off or the device is rebooted.

The main advantage of volatile memory is that it is faster than permanent storage, as it does not require any time to be written or read.

Learn more about Volatile memory:

https://brainly.com/question/29216283

#SPJ4

The product form from the synthesis reaction between strontium (Sr) and sulfur (S) is SrS. Option C is the correct answer.

Strontium sulfide is the inorganic chemical compound. It has the formula SrS. It is a white solid. The compound is an intermediate in the conversion of strontium sulfate, the main strontium ore called celestite, to other more useful compounds.

Strontium sulfide is used in chemical research and as organic intermediates. It is also used as depilatory. It is also used as Isotope labelled enantiomer of Voriconazole (V760000), an antifungal agent and an ergosterol biosynthesis inhibitor.

Learn more about Strontium sulfide on

https://brainly.com/question/24317624

#SPJ1

When the elevator is descending at a constant speed, there are two forces at work on it. Both the weight of the elevator and the cable's tension are forces.

A cable-hung elevator will experience zero change in velocity if it is descending at a steady speed. The net acceleration is therefore zero. The tension force (T) applied by the cable to the elevator is pulling it upward.

The mechanical labour that moves the elevator up and down uses potential in the case of the elevator sinking. Note: The entire mechanical energy comprises a system in consideration is the sum of kinetic energy and potential energy.

To know more about constant velocity visit:

https://brainly.com/question/2088385

#SPJ4

Answer:

  16.6 V

Explanation:

You want the voltage of a battery that delivers 0.255 Amps to a series circuit consisting of a 25Ω resistor and a 40Ω resistor.

The voltage is the product of the current and the resistance:

  V = IR

  V = (0.255 A)(25 +40Ω) = 0.255·65 V = 16.575 V ≈ 16.6 V

The voltage of the battery is about 16.6 volts.

__

Additional comment

We rounded to 3 significant figures because the problem values are given to that precision.

Solar energy is a renewable and clean source of energy that has a wide range of applications and benefits for the environment and society.

Solar energy is the energy generated by the Sun's rays, which can be converted into usable energy using various technologies. The Sun is the source of solar energy, as it emits enormous amounts of energy through nuclear fusion reactions that take place in its core.

The process of generating usable energy from solar energy involves several steps:

   Collecting solar energy: Solar panels or solar cells are used to collect solar energy. These devices are designed to capture the Sun's rays and convert them into direct current (DC) electricity.

   Converting DC to AC: Since most electrical devices run on alternating current (AC), the DC electricity generated by the solar panels must be converted into AC. This is done using an inverter.

   Distributing energy: The AC electricity produced by the solar panels is distributed to power electrical devices or is fed into the electrical grid.

There are several uses of solar energy. It can be used for:

   Generating electricity: Solar power plants can be built to generate electricity on a large scale.

   Heating water: Solar water heaters can be used to heat water for homes or businesses.

   Heating buildings: Passive solar heating can be used to design buildings that are heated by the Sun's energy.

   Cooking: Solar cookers can be used to cook food using the Sun's energy.

   Providing light: Solar-powered lights can be used to provide lighting in areas where electricity is not available.

For such more questions on Solar Energy

https://brainly.com/question/17711999

#SPJ4

The orbital radius is 2.7 au for an asteroid orbiting the Sun had an orbital period of 7.5 years. Option e is the correct answer.

This would be the time that a given body does a complete revolution in its orbit.

It can be written as:

[tex]\sqrt{\dfrac{4 \pi^2 r^3}{Gm}}[/tex]

Where,

π = 3.14

G is the gravitational constant = [tex]6.67 \times 10^{-11}\ m^3/(kgs^2)[/tex]

M is the mass of the sun = [tex]1.989 \times 10^{30}\ kg[/tex]

r is the radius, which we want to find.

T is given to be 7.5 years,

Rewriting the equation for the radius we get,

[tex]r = \sqrt[3]{\dfrac{(2.3655 \times 10^8)^2 \times 6.67 \times 10^{-11} \times 1.989 \times 10^{30}}{4 \pi^2}}[/tex]

So the orbital radius is,

[tex]4.29 \times 10^{11}\ m[/tex]

= 2.7 AU

To know more about the orbits, here

brainly.com/question/82505

#SPJ4

To find the length of an array in PHP, you can use the count() function.

The count() function returns the number of elements in an array.

Here's an example:

$myArray = array("apple", "banana", "orange", "grape");

$length = count($myArray);

echo "The length of the array is " . $length;

In this example, we first define an array called $myArray with four elements. Then we use the count() function to find the length of the array and assign the result to a variable called $length. Finally, we use the echo statement to display the length of the array.

The output of this code will be:

The length of the array is 4

Note that the count() function can also be used to find the number of elements in an object or a variable with a countable value.

To learn more about Length :

https://brainly.com/question/30635319

#SPJ4

The electromagnetic force is shown by image B

Electromagnetic force is one of the four fundamental forces of nature. It is a force that arises from the interaction between electrically charged particles. This force is responsible for the behavior of electrically charged objects, as well as the behavior of light and other electromagnetic radiation.

The electromagnetic force is a long-range force, meaning that it can act over large distances. It can be either attractive or repulsive, depending on the charges of the particles involved. Like charges repel each other, while opposite charges attract.

Learn more about electromagnetic forces:https://brainly.com/question/13191643

#SPJ1

Answer: d1ldo

Explanation:

Answer:

Africa, Asia and Europe

Explanation:

The connection between the change in potential energy of the particle and the change in electric potential is defined as "the change in electric potential is the change in potential energy divided by the charge". So, the correct answer is D.

The electric potential at a point in an electric field is defined as the electric potential energy per unit charge at that point. Therefore, the change in electric potential between two points is equal to the change in electric potential energy divided by the charge of the particle that is moving between those points.

As the charged particle moves from one point to another, its potential energy changes due to the work done by the electric field on the particle. The change in potential energy of the particle is equal to the work done by the electric field on the particle. Therefore, the change in potential energy divided by the charge of the particle is equal to the change in electric potential.

In summary, the change in electric potential between two points is equal to the change in potential energy divided by the charge of the particle that is moving between those points. Therefore, the correct answer is D - "The change in electric potential is the change in potential energy divided by the charge".

You can learn more about potential energy at

https://brainly.com/question/14427111

#SPJ4

The magnitude of the potential difference v is 0.0006803 V.

To find the magnitude of the potential difference v, we can use the equation for kinetic energy and electric potential energy:

[tex]KE = (1/2)mv^2 = qV[/tex]

Where KE is the kinetic energy, m is the mass of the bead, v is the velocity of the bead, q is the charge of the bead, and V is the potential difference.

Rearranging the equation to solve for V, we get:

[tex]V = (1/2)mv^2/q[/tex]

Plugging in the given values:

[tex]V = (1/2)(3.71 g)(1.62 m/s)^2/(14.5 C)[/tex]
[tex]V = (1/2)(0.00371 kg)(2.62 m^2/s^2)/(14.5 C)[/tex]
[tex]V = 0.0006803 J/C[/tex]
[tex]V = 0.0006803 V[/tex]

Learn more about the magnitude of the potential:

https://brainly.com/question/25895069

#SPJ11

The photons that make up electromagnetic radiation each have a distinct quantity of energy known as a quantum.

An electromagnetic wave makes up a photon, a small particle. They are both massless and chargeless. They can be compared to a small packet pure light energy. A quantum, or discrete packet comprising energy or matter, is an example.

wavemeter: a tool for measuring the separation between subsequent wavefronts of an electromagnetic wave that are in phase. By measuring the wave's frequency, the decision is frequently made indirectly.

To know more about electromagnetic visit :

https://brainly.com/question/17057080

#SPJ4

Zigzagging mountain roads offer several advantages from the viewpoint of energy conservation and power: Reduced gradient. Improved traction. Reduced stress on the road. Easier construction

What advantages do Zigzagging mountain roads have?

Zigzagging mountain roads also known as switchbacks have several advantages with respect to energy conservation and power: Reduced gradient: Switchbacks allow the road to have a shallower gradient compared to a straight road, which reduces the amount of energy required to climb the mountain. This can save fuel for vehicles and reduce the physical exertion for hikers and cyclists. Improved traction: The zigzagging design provides better traction for vehicles and reduces the risk of skidding or slipping, especially in wet or icy conditions. Reduced stress on the road: A straight road up a steep mountain would experience higher stress and wear and tear, which could lead to damage or even collapse. Zigzagging the road reduces the stress and prolongs the road lifespan. Easier construction: Building a straight road up a steep mountain would require much more excavation and engineering work, making it a more expensive and time-consuming process. Zigzagging the road allows for easier and more efficient construction.

Overall, the switchback design of mountain roads is a more efficient and practical solution that conserves energy, improves safety, reduces stress on the road, and makes construction easier.

To know more about Zigzagging mountain roads, visit:

https://brainly.com/question/13961942

#SPJ1

The velocity of the ejected electron must be 11.2 x 10^6 m/s.

An electron is a subatomic particle with a negative electric charge. It is one of the basic building blocks of matter and is believed to be a point-like particle with no internal structure. Electrons are found in all atoms and are responsible for chemical bonding between atoms, which gives rise to the formation of molecules. Electrons are also the primary carriers of electricity in solids, liquids, and gases and are involved in many of the physical and chemical properties of materials. Electrons can move freely in a vacuum and in certain types of materials are known as free electrons, while in other materials they are bound to the nucleus of an atom.

To learn more about electron

https://brainly.com/question/26084288

#SPJ4

The velocity of the ejected electron must be [tex]11.2 \times 10^6 m/s.[/tex]

An electron is a subatomic particle with a negative electric charge. It is one of the basic building blocks of matter and is believed to be a point-like particle with no internal structure. Electrons are found in all atoms and are responsible for chemical bonding between atoms, which gives rise to the formation of molecules.

Electrons are also the primary carriers of electricity in solids, liquids, and gases and are involved in many of the physical and chemical properties of materials. Electrons can move freely in a vacuum and in certain types of materials are known as free electrons, while in other materials they are bound to the nucleus of an atom.

To learn more about electron

brainly.com/question/26084288

#SPJ4

The dots are furthest apart along the path when the speed of the skater is the greatest.

To know more about speed visit:

https://brainly.com/question/20435886

#SPJ1

Be sure to convert each number to scientific notation first, before performing any operations ;50,000 min.

Notation is a set of symbols or a system of symbols used to represent or communicate something. It is often used in mathematics and other sciences to represent formulas, equations, and concepts. Notation can also be used in music, literature, and other forms of communication. For example, musical notation is used to communicate the composition and performance of music, while literary notation is used to communicate the structure of a piece of writing. Notation can also be used to represent data or instructions in computer programming.

Distance to Moon = 3.84 x 10^8 ft

Speed = 1.54 x 10^6 ft/min

Time = (3.84 x 10^8 ft) / (1.54 x 10^6 ft/min) = 25,000 min

Time for round trip = 2 x 25,000 min = 50,000 min

To learn more about notation

https://brainly.com/question/30433229

#SPJ4

Be sure to convert each number to scientific notation first, before performing any operations ;50,000 min.

A system of symbols is known as notation, and it is used to represent or communicate ideas. It is frequently used to express formulas, equations, and concepts in mathematics and other fields. Music, literature, and other kinds of communication can all use notation. For instance, literary notation is used to convey a piece of writing's structure, whereas musical notation is used to convey the composition and performance of music. In computer programming, notation can also be used to represent data or instructions.

Distance to Moon = [tex]3.84 \times 10^8 ft[/tex]

Speed = [tex]1.54 \times 10^6 ft/min[/tex]

Time = [tex]\frac{(3.84 \times 10^8 ft)}{ (1.54 \times 10^6 ft/min) } = 25,000 min[/tex]

Time for round trip = 2 x 25,000 min = 50,000 min

To learn more about notation

brainly.com/question/30433229

#SPJ4

(a) As σ is increased, The minimum  angle will be "19.2°".

(b) The acceleration will be "0.91 m/s²"once the box has began to move.

(c) The speed will be "3 m/s" as the box slid a distance 4.7 m along the loading map.

According to the question,

Mass = 25.0 kg

Kinetic friction = 0.25

Coefficient of static friction = 0.35

(a) We know,

⇒ static friction = mg sine

⇒ mg cosine * u = mg sine

then,

tan A = u = 0.35

a = 19.2

Therefore, as α is increased,  the minimum angle at which the box starts to slip is 19.2°.

(b) We know that:

Kinetic friction = mgCos19.2 * 0.25

                        = 2.31m

and,

Net force downwards = mgSin19.2 -  mgCos19.2* 0.25

By substituting the values, we get

                                        = m(3.22-2.31)

                                        = 0.91m/s²

Therefore, As this angle, the acceleration once the box has begun to move at 0.91 m/s².

(c) since the box is sliding at a distance of 4.7 meter:

Thus,

The speed will be:

→ [tex]v^{2} - u^{2} + 2as[/tex]

[tex]0 + 2* 0.91* 5[/tex]

= 9.21

[tex]v = 3m/s[/tex]

Therefore, at this angle, at 3m/s will the box be moving after it has slid a distance 4.7m along the loading ramp

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ4

To determine the distance h between the two fluid levels of the water-filled manometer, we can use the equation:

P = ρgh

P = 11kPa - 101kPa = -90kPa

We can determine h using the water's density (1000 kg/m3) and the gravitational acceleration (g = 9.8 m/s2):

P=gh, where h=P(g)

h is equal to (-90,000 Pa) / (1000 kg/m3 9.8 m/s2)

h ≈ -9.18 m

To know more about fluid levels, check out :

https://brainly.com/question/8424017

#SPJ4

The thermal boundary layer is typically thicker than the velocity boundary layer due to the difference in the diffusion rates of heat and momentum.

The thermal boundary layer is the region of fluid near a solid surface where the temperature of the fluid differs from the temperature of the solid surface.

The velocity boundary layer, on the other hand, is the region of fluid near a solid surface where the velocity of the fluid differs from the velocity of the solid surface.

The diffusion rate of heat is typically lower than the diffusion rate of momentum, meaning that heat takes longer to spread through a fluid than momentum does. As a result, the thermal boundary layer is typically thicker than the velocity boundary layer.

This difference in thickness is important in many engineering applications, such as the design of heat exchangers and the prediction of heat transfer rates. It is also important in the study of fluid dynamics, as the thickness of the thermal and velocity boundary layers can affect the behavior of the fluid flow.

To know more about boundary layer here:

https://brainly.com/question/28965743#

#SPJ11

In comparison to floating, the block experiences a stronger buoyant force when it is entirely submerged.

The correct option is C.

The buoyant force, which exerts upward pressure on completely or partially submerged objects, operates both ways. Its thrust upward is also known as an upthrust. The buoyant force on a body that is partially or entirely submerged in a fluid creates the impression that it is losing weight or becoming lighter.

A body submerged in a liquid, whether partially or entirely, will experience buoyant force, which is equal to the weight of the liquid the body displaces and acts upward at the centre of the fluid's mass.

Learn more about Buoyant force:

brainly.com/question/11884584

#SPJ4